SCHEDULE: 12:00 PM - 9:00 PMHOURLY RATE: $32.64Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety.What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture.Our Diesel Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Utilizing diagnostic software, the Mechanic is responsible for interpreting failure modes and initiate or assign necessary repairs. At times, the Mechanic may be on call, and required to assist with emergency breakdowns.Applicants must be at least 18 years of age and legally eligible to work in the United States.A valid driver’s license is required. CDL preferred.Experience working on heavy duty diesel equipment OR training from a recognized trade school is required.Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records. Must be able to meet the physical and safety requirements of the position.Must be able to provide own toolsEntry-level candidates will be considered for this position and on-the-job training provided. Candidates with the following experience may be considered for a Mechanic B or A level position which has a higher level of responsibility as well a compensation:2+ years experience working as a heavy duty Diesel MechanicExperience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar.Working knowledge of applicable DOT and OSHA standards and regulations.Other duties as assigned.This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice.Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment andprohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.USD $32.64/Hr.

Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network.Come join us to create what’s next. Let’s define tomorrow, together.DescriptionAt United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they’re well taken care of and ready to get our customers to their desired destinations. If you’re ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape.The sign-on bonus is exclusively for external candidates; internal applicants are not eligible to receive the sign-on incentive.Key Responsibilities:Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipmentRequires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervisionJourneyman electrical license a plusRequires the ability to make low and high voltage repairs to all building electrical equipmentThis includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devicesYou should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyorsFacilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditionsSchedules are bid and awarded according to seniorityFacilities Technicians are represented by the International Brotherhood of Teamsters (IBT)Salary increases will be administered according to the current IBT/United contractNew employees are required to join the union within ninety (90) days of employmentThere is an initiation fee for joining the union and subsequent monthly union dues which are set by the Local LodgeUnited values diverse experiences, perspectives, and we encourage everyone who meets the minimum qualifications to apply. While having the “desired” qualifications make for a stronger candidate, we encourage applicants who may not feel they check ALL of those boxes! We are always looking for individuals who will bring something new to the table!What’s needed to succeed:Twenty Four months experience required in at least three of the following areas:Electrical (including 480 volt, 3 phase)Structural (including steel frame construction)HVAC (including building management systems)Mechanical (including conveyors)PlumbingPLC electronic/computer controlsMust have completed high school diploma, GED or equivalentAbility to maintain and repair all building disciplines, heavy mechanical and weldingWork may be indoors or outside or in elevated areas anywhere on airportMust be able to climb and work from ladders, and/or walk for extended periodsModerate liftingMust possess sufficient tooling to perform required tasksComputer experience for input and retrieval of dataQualified candidates must be immediately available for full time employmentMust possess a valid, clean, applicable state driver's licenseQualificationsUnited values diverse experiences, perspectives, and we encourage everyone who meets the minimum qualifications to apply. While having the “desired” qualifications make for a stronger candidate, we encourage applicants who may not feel they check ALL of those boxes! We are always looking for individuals who will bring something new to the table! What’s needed to succeed: Twenty Four months experience required in at least three of the following areas:Electrical (including 480 volt, 3 phase)Structural (including steel frame construction)HVAC (including building management systems)Mechanical (including conveyors)PlumbingPLC electronic/computer controlsMust have completed high school diploma, GED or equivalentAbility to maintain and repair all building disciplines, heavy mechanical and weldingWork may be indoors or outside or in elevated areas anywhere on airportMust be able to climb and work from ladders, and/or walk for extended periodsModerate liftingMust possess sufficient tooling to perform required tasksComputer experience for input and retrieval of dataQualified candidates must be immediately available for full time employmentMust possess a valid, clean, applicable state driver's license What will help you propel from the pack: Electronics diagnostics and troubleshootingThe starting rate for this role is $32.65.This is also a bonus eligible position (i.e. profit sharing).We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement).United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. Equal Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT.We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact to request accommodation.

Move forward with us! At NJ TRANSIT, you'll join us in transforming the third-largest transportation agency in North America. We are committed to delivering safe, reliable service that gets customers to their destinations on time–and we're looking to hire talented folks with a commitment to excellence to make it all possible. Summary: Mechanic B-Electrical Shop Electricians conduct general and specialized installation, maintenance, and repair on various types of electrical equipment. Roles and Responsibilities: Must present one of the following: New Jersey Electrical License, Certificate of Completion of Apprenticeship Electrician from the NJ Department of Labor Office of ApprenticeshipORfive (5) years of electrical experience in commercial, industrial and/or residential environments.Ability to read and interpret technical documents, wiring diagrams, schematics, construction drawings, etc.Experience with troubleshooting and repairing electrical systems.Must pass New Jersey Transit’s Electrician Aptitude Test.Present a valid driver’s license andHigh School Diploma or GED.Successfully pass the pre-screening process including drug test, physical, and criminal, employer, and driving background checks. Education, Experience, and Qualifications: Installing low or medium voltage equipment, panels, motors, controls, etc.Installation, maintenance, and repair of electronic systems, PLC’s, Controllers, Computers, Alarms, PA’s, etc.Test equipment such as multi-meters, insulation testing, phasing, etc.Using and understanding code requirements, including NEC, NESC, OSHA, IEEE, NFPA, etc.Prior railroad, transportation, or military experience. Physical Requirements Stoop, bend, crawl, balance, climb, kneel.Be exposed to equipment that intensifies the heat factor on an occasional basis.Wear protective equipment such as hardhat, safety glasses, and safety-toe boots.Work Locations:Redbank, Hoboken, and Raritan, NJ.This is a Unionized position. Rate of pay: The pay rates are tiered and are non-negotiable based on years and types of experience.Tiers start at $29.11 (80% of the full rate), $32.75 (90% of full rate), $36.39 (100%). At NJ Transit, you will enjoy a competitive salary and excellent benefits package: Comprehensive Family Health Insurance – Medical, Prescription, Dental, VisionFlexible Spending AccountLife InsurancePaid LeaveTuition AssistancePre-Tax Commuter BenefitsPlanRetirement Plans 401(a) - Retirement plan with a 6% employer contribution401(k) - Retirement saving plan with up to an 3% company match457(b) - Deferred Savings Plan At NJ TRANSIT, diversity and inclusivity are vital to our success as are committed to hiring individuals from diverse backgrounds, experiences, abilities, and veteran status. As an Equal Opportunity Employer, we encourage all qualified applicants to apply and join our team. Learn more about NJ TRANSIT! Sign up to receive an invitation to our next live information session at WWW.NJTRANSIT.COM/BEST This position is deemed safety sensitive per the Department of Transportation (DOT) Drug and Alcohol Testing Regulations. The DOT Drug and Alcohol Testing Regulation 49 CFR Part 40 does not authorizethe use of marijuana for any reason. It is unacceptable for any safety-sensitive employee subject to drug testing under DOT regulations to use recreational or medical marijuana. The prohibitionincludes any derivative of marijuana such as CBD oils, teas, etc. The use of recreational and medical marijuana is a violation of NJ TRANSIT’s Drug and Alcohol-Free Workplace Policy for safety-sensitive employees. www.njtransit.com INDRA1

Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine maintenance and repairs on plant equipment.Troubleshoot mechanical issues and implement solutions.Ensure compliance with safety standards and regulations.Collaborate with team members to optimize plant operations.Maintain accurate records of maintenance activities.What Are We Looking ForStrong mechanical aptitude and problem-solving skills.Ability to read and interpret technical manuals and schematics.Effective communication and teamwork abilities.Proficiency in using hand and power tools.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$29.55 per hour.Benefits through the Union for Medical, Dental, Vision and Pension.Union paid vacation, sick leave and holidays.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: OtherAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine and preventive maintenance on mobile equipment.Diagnose and repair mechanical, electrical, and hydraulic issues.Maintain accurate records of all maintenance and repair work.Ensure compliance with safety regulations and company policies.Collaborate with team members to improve equipment performance.Order parts, tools and equipment for necessary repairsPerform DOT inspections on tri-axles and trailersWhat Are We Looking ForStrong mechanical aptitude and problem-solving skills.Proficiency in diagnosing and repairing mobile equipment.Ability to read and interpret technical manuals and schematics.Effective communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must possess a valid driver's license, CDL and maintain a clean driving record.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$35-40 per hour, 401(k) retirement savings plan with an automatic company contribution as well as matching contributions, highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: Cement & WhiteAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingInstall, maintain, and repair electrical systems and equipment.Troubleshoot and diagnose electrical issues efficiently.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, sensors. Troubleshoot equipment including VFD, multilin. Rewires motors.Collaborate with team members to complete projects on time.Maintain accurate records of work performed.What Are We Looking ForIndustrial Electrician experience required; 5 years overall electricianexperience required.Certification as an Industrial Electrician; or equivalent combination of education and training required.Abilityto apply concepts of basic algebra and geometry in practical situations.System knowledge of HMI and PLC control systems. Rockwell/Allen Bradley experience preferredEffective communication and teamwork abilities.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, elevated noise level and working extended hours as needed.What We Offer$36.00 to $42.00 per hour.Company benefits for Medical, Dental, Vision, Disability and more.Union paid PTO, and holidays. 401K match.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Overview: With over 150 years of experience,and headquartered in Southern CA, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets.WHY JOIN USWe understand that hiring great people is the foundation of everything we do. Our employee benefits packages include:Competitive pay from $70-93K Medical, Dental, Vision and Prescription coveragePaid vacation and holidays401(K)matchLife insurance, AD&D and long-term disabilityTuition reimbursementOpportunities availablenationwideEmployee discountson vehicles, hotels, theme parks, select cell phone bills and so much morePet InsuranceLegal Plan, and ID Theft ProtectionSUMMARYTo support our rapid growth, CoolSys Energy Design - Consulting Engineers (CED) is in search of a Senior Plumbing Engineer to join our team! Our ideal candidate will be able to design commercial plumbing and fire protection systems, maintain positive relationships with clients and vendors, and lead a team of staff to ensure timely and quality deliverables. Responsibilities: • Maintain responsible control over all design activities pertaining to the project, including engineering, quality control, and code compliance.• Perform site inspections to determine compliance with construction documents and resolve design issues during the construction phase.• Perform hydraulic calculations and work with outside resources to incorporate special hazard systems.• Document production of small and large projects.• Participate in conceptual design for specific projects.• Create and maintain AutoCAD and Revit drawing packages.• Provide deliverables and products such as calculations, drawings, and specifications related to plumbing.• Comply with project schedules, regulatory requirements, and industry best practices.• Ensure work is executed accurately and in a timely and cost-effective manner.• Ensure that design calculations and engineering drawings are constructible, comply with code, and meet customer quality requirements and company standards.• Manage, assign/prioritize workloads, and provide leadership to junior engineers performing plumbing and fire protection system design.• Assess and anticipate deliverables, prepare budgets and schedules, and communicate resource requirements to senior management.• Represent CoolSys Energy Design in project meetings covering technical issues, including meetings with utilities, owners, contractors, construction subcontractors, and inspectors. Qualifications: • Bachelor of Science degree in Mechanical Engineering. Other engineering or construction disciplines are considered based on experience and skill set.• 5 or more years of relevant professional experience.• Knowledge of Revit and AutoCAD required.• Previous experience managing staff is preferred.• Strong analytical, problem-solving, and decision-making capabilities, as well as demonstrated high-quality technical writing skills.• Team player with sound business ethics and the ability to multi-task in a fast-paced environment.• Ability to achieve project goals and deadlines with minimal supervision.• Willingness to work with all levels of internal staff, as well as outside clients and vendors to develop a full understanding of building energy systems and their operation.• High proficiency in Microsoft Office applications (Word, PowerPoint, Outlook, and Excel).• This position will require minimal travel to project sites. Join Us: Today, there are 27 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookand Twitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) and drug testing are required for all positions. CoolSys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

What this job involves: This role involves rotating weekly between two sites in Princeton, NJ, performing electrical maintenance, installation, and repair tasks in a pharmaceutical facility. The position requires expertise in industrial electrical systems, ability to read blueprints, troubleshoot equipment, and perform general maintenance duties.What your day-to-day will look like:Planning and executing electrical work involving installation, testing, maintenance, and repair of various electrical apparatus and control equipment.Interpreting blueprints, wiring diagrams, and schematic drawings to plan and organize work efficiently.Collaborating with clients and maintenance staff to determine optimal approaches for completing assignments safely and in compliance with environmental regulations.Installing electrical raceways, bus work, and performing necessary measurements, cutting, threading, and bending of conduit using appropriate tools.Troubleshooting and repairing faulty wiring, motors, and other electrical equipment.Diagnosing, maintaining, upgrading, and installing electrical/instrumentation equipment and systems in a large pharmaceutical facility.Anticipating potential issues and taking proactive measures to maintain facility structures and assets.Documenting all work performed and hours spent on tasks in the CMMS system.Performing associated tasks and collaborating with other trades as needed.Addressing general maintenance tasks, including plumbing issues and door repairs.Work Schedule: Monday through Friday, 7AM-3:30PMDesired or preferred experience and technical skills:CMMS Proficiency: Ability to document all tasks performed and hours spent using a computerized maintenance management system (CMMS).Collaboration: Strong collaboration skills to work effectively with clients and maintenance staff.Proactive Problem-Solving: Ability to anticipate potential issues and take pre-emptive action to maintain facility structures and assets.Experience in Pharmaceutical Facilities: Previous experience working in a pharmaceutical facility or similar environment.Instrumentation Skills: Experience in diagnosing, maintaining, upgrading, and installing instrumentation equipment and systems.Communication Skills: Strong verbal and written communication skills for effective documentation and interaction with team members.Required Skills and Experience:Electrical Expertise: Strong understanding of industrial electrical systems, including installation, maintenance, and repair of electrical apparatus and control equipment.Blueprint Interpretation: Ability to read and interpret blueprints, wiring diagrams, and schematic drawings.Troubleshooting Skills: Competence in diagnosing and repairing faulty electrical wiring, motors, and other equipment.Hands-On Experience: Experience with installing electrical raceways, bus work, and performing conduit measurements, cutting, threading, and bending.General Maintenance: Skills in performing general maintenance tasks, including plumbing and door repairs.Regulatory Compliance: Knowledge of and ability to adhere to environmental and safety regulations.#MMjobs#Ejobs

Overview: FULL-TIME POSITION AVAILABLE. 8:00 am-4:30 pm. ON CALL FOR EMERGENCIES.At Genesis Healthcare, we are dedicated to improving the lives we touch through the delivery of high-quality care and exceptional service. As a leading provider in the long-term care industry, we believe in fostering a collaborative, inclusive and supportive work environment where every team member is valued and empowered to make a difference. Whether you're an experienced professional or just starting your career, we offer opportunities for growth, development, and advancement in a range of roles. Join us in our mission to enhance the well-being of our patients and residents while making a meaningful impact in the communities we serve. Responsibilities: Fully utilize your mechanical skills and make a difference in our patients' lives as a Maintenance Supervisor at Genesis! In this position, you will be responsible for the overall maintenance operation of the nursing center to provide a safe, comfortable environment for our patients.* Coordinates and provides for the completion of corrective and preventative maintenance of the grounds and building in a timely manner in compliance with Federal, State, and local laws* Performs overall supervision of the maintenance department including hands-on performance of maintenance and repair work* Maintains fire alarm and emergency generator systems; ensures safety of all customers in order to minimize the potential for fire and accidents* Maintains required records and reports; participates in budget planning* Remains on call for emergencies seven days a week, twenty-four hours a day Qualifications: High school degree or equivalent and basic training in electrical, plumbing, heating and HVAC systems. Benefits: *Variable compensation plans*Tuition, Travel, and Wireless Service Discounts*Employee Assistance Program to support mental health*Employee Foundation to financially assist through unforeseen hardships*Health, Dental, Vision, Company-paid life insurance, 401K, Paid Time OffWe also offer several voluntary insurances such as:*Pet Insurance*Term and Whole Life Insurance*Short-term Disability*Hospital Indemnity*Personal Accident*Critical Illness*Cancer CoverageRestrictions apply based on collective bargaining agreements, applicable state law and factors such as pay classification, job grade, location, and length of service. Posted Salary Range: USD $23.00 - USD $23.00 /Hr.

Equal Employment Opportunity For United States: WM is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, creed, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law. For Canada: WM is committed to the principle of equal employment for all applicants and employees, without discrimination on the basis of all grounds protected by applicable human rights legislation. Accommodations are available on request for candidates taking part in all aspects of the selection process. Please notify us if you require accommodation Waste Management (WM), a Fortune 250 company, is the leading provider of comprehensive waste and environmental services in North America. We are strongly committed to a foundation of operating excellence, professionalism and financial strength. WM serves nearly 25 million customers in residential, commercial, industrial and municipal markets throughout North America through a network of collection operations, transfer stations, landfills, recycling facilities and waste-based energy production projects. I. Job SummaryWM (formerly Waste Management) Fleet Maintenance Operational Management Trainee (FOMT) program is a 12 month long course designed to develop individuals into fleet maintenance manager roles. Fleet Maintenance Managers manage the full fleet of primary and secondary equipment and continually focuses on achieving market base profitability through effective management of all fleet and maintenance activities within the assigned area, including cost control, management development, and high training and safety standards. Candidates that successfully complete this program must be willing to relocate within an assigned geographic area to lead a WM Fleet Shop. During this program candidates will be required to travel as most of the curriculum will be on the job training (OJT) in the field with some classroom training. Successful candidates will develop incomparable knowledge of the Fleet Manager role. II. Duties and ResponsibilitiesTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. Successfully complete the FOMT curriculum. Complete all required training items through participation in the WM Learning Management System.Responsible for developing the skills to become a Fleet Manager.Completes assigned computer-based training.Attends and participates in all mandatory group training sessions.Develops a working knowledge of WMs Fleet and general business applications.Develop a working knowledge of heavy equipment functionality and maintenance care including actual operation and in-shop maintenance.Learn how to effectively manage site personnel through experiential efforts and training.Develops understanding of financial, accounting, and forecasting processes and systems.Develops a strong understanding and dedication to the WM Safety Program; work with Corporate and local safety teams to continue to create an increasingly aware and observant safety conscious culture.Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting parts usage, and accounting for repair times.Participates in worksite meetings, huddles, and area mentor programs. Performs other duties as assigned that may include special projects and interim management assignments. Learning will be very action and experiential based. III. Supervisory ResponsibilitiesThis job may have periodic leadership / management responsibilities throughout the program. IV. QualificationsThe requirements listed below are representative of the qualifications necessary to perform the job. A. Education and ExperienceEducation: Bachelor’s Degree (accredited), or in lieu of degree, High School Diploma or GED (accredited) and three (3) years of relevant fleet maintenance work experience.Experience: Four (4) years of supervisory/leadership experience in fleet maintenance operations (in addition to education requirements) required B. Preferred Certificates, Licenses or Registrations Valid Driver’s License C. Other Knowledge, Skills or Abilities Required Must be willing to relocate within an assigned geographic area at the conclusion of the training programMust be proficient in Microsoft OfficeMust be willing to work various hours and weekends as necessaryMust be willing to work outdoors and/or in a maintenance shopMust have excellent verbal and written communications skillsMust have exceptional time management and organizational skillsProven problem-solving ability and successful conflict resolutionMechanical experience or Technical DriveStrong analytical skills. V. Essential Functions, Environment and Physical Requirements While some of the FOMT work is performed within an office atmosphere, field work and frequent field assignments are the core foundation of the FOMT and operations positions. These field assignments will include exposure to the elements, weather, and other non-office type conditions. When conducting field work and assignments one should possess the ability to ascend onto and descend from various pieces of heavy equipment and ride accordingly for many consecutive hours. The FOMT will be exposed to climatic weather as depicted by the geographical region for which you reside or are assigned. A FOMT will also periodically be required to work non-traditional work schedules i.e. 12 hour workdays, some weekends, some early start times etc. BenefitsAt Waste Management, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short-Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site. *PLEASE SUBMIT A CURRENT RESUME TO RECIEVE FURTHER CONSIDERATION FOR THIS POSITION.If this sounds like the opportunity that you have been looking for, please click “Apply.” #LI-JR1

In our tuition-free Tech Fundamentals program, you will master the basics of IT with real-world applications. What’s Included in Tech Fundamentals - Up to 20 weeks of instructor-led virtual training - Opportunity for a paid internship or a project-based learning experience - Opportunity to earn industry-recognized certifications: CompTIA A+ & IT Fundamentals+, a Google IT Support Certificate, and an IT Generalist Apprenticeship credential - Exposure to Microsoft, Cisco, AWS, and other leading technologies - Mentoring from senior-level IT professionals - Employment readiness workshops - Job placement assistance with access to a wide range of top employers - A full range of ongoing social service and personal development support Who is Eligible Young Adults - 18–26 years of ageHigh school diploma or equivalent - Legally authorized to work in the US - Located in or near the following cities:Baltimore, Brooklyn/New York City, Dallas, San Antonio, Houston, Detroit, Newark, St. Louis, Kansas City, Raleigh, Dayton Military Veterans and Military Spouses - Over 21 years of age - Legally authorized to work in the US - Must be one of the following: Transitioning active-duty service member through the DoD SkillBridge program / honorably discharged / member of the Guard or Reserves - In or near the following cities: Baltimore, Dallas, San Antonio, Houston, Detroit, Newark, St. Louis, Kansas City, Raleigh, Dayton

Build your best future with theJohnson ControlsteamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of theJohnson Controlsfamily and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salaryPaid vacation/holidays/sick time-10 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care –Available day oneEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us out!:https://youtu.be/pdZMNrDJviYWhat you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation.Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of serviceHow you will do it Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software.Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads.Manages assigned work to meet professional and efficient execution of time and customer satisfaction.Reportsproblems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally.Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals.Install and modify software and graphics.Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work.Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to allcontrol'stechnicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors.Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required.Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment.Compilesjob documentation, such as certificate of completion, customer training form, training certificates and punch lists.Conducts extensiveself-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company.Other duties related to the installing,commissioningand servicing of building controls and facilities management systems and energy management systems, as assigned.Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations,and billof material, network layouts and electrical schematics as required.Assists in developing and testing software programs necessary to operate the system per the project requirements' intent.Compiles and/or completes project as built and close-out documentation.Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation.Selects, orders, and tracks the delivery of materials for assigned.Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation.May provide field change information to the project team for the creation of as-built drawings and software.Keeps management and JCI contractor or customer informed of job progress and issues.Assists in performing site-specific training for owner / operator on the total building control system.Participates in release meeting with project field team.Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities.Provide quotes to support recommendations and solutions.What we look forRequiredBe a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business.Minimum of Six (6) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems.Vocational School program graduate or associate's degree in a technical field, or two years’ experience in servicing electronic and or mechanical systems.Demonstrated ability to install and/or service electronic control systems and HVAC equipment.Effective communication skills to represent Johnson Controls on customer sites.Possesses the ability to explain technical information to technical and non-technical people.Demonstrate effective writing skills as well as understanding of programs and software applications.Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems.HIRING HOURLY RANGE: $31.63-$47.40/hr (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at https://www.johnsoncontrols.com/careers

Our Team is Kind of a Big Deal!UniFirst is seeking areliable and hardworking Maintenance Tech II to join our UniFirst community! As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime!We have an immediate opening and provide on the job training. What’s in it for you Training:Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth:You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture:Our culture is what makes UniFirst an organization that stands out from the rest.Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. Compensation:$28 - $33/hrWhat you’ll be doing: Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Assist other maintenance personnel with emergency and non-emergency repairs.Troubleshoot and repair Programmable Logic Controllers (PLC’s) and associated control systems. Follow blueprints, schematics, operation manuals, manufacturer’s instructions, and engineering specifications. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Perform daily and weekly safety checks on boilers and make necessary repairs as required. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Performing basic welding activities to effect repairs on facilities and equipment.Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System.Perform other duties as assigned by leadership. QualificationsWhat we’re looking for: High school and/or GED is preferred.Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age.Knowledgeable in industrial maintenance of facilities and equipment.Minimum of 1 year of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Must pass UniFirst’s maintenance knowledge assessment to be eligible for employment.Ability to read blueprints and schematics is required.Ability to read and understand maintenance literature printed in English required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is requiredAbility to work overtime as needed is required.Valid driver’s license and a safe driving record are required.Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. There’s a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Line of Business: AggregatesAbout Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine maintenance and repairs on plant equipment to ensure operational efficiency.Troubleshoot mechanical issues and implement effective solutions to minimize downtime.Conduct inspections and preventive maintenance on conveyors, crushers, and other equipment.Adhere to safety regulations and maintain a clean, organized work area.Collaborate with team members to optimize plant performance and reliability.What Are We Looking ForProficiency in diagnosing and repairing mechanical systems and components.Ability to interpret technical drawings, schematics, and manuals.Strong problem-solving skills with a focus on efficiency and safety.Capability to work independently and as part of a team in a fast-paced environment.Commitment to safety practices and adherence to company guidelines.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must meet all requirements for safety compliance and job-related training.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$28-33 per hour401(k) retirement savings plan with an automatic company contribution as well as matching contributionsHighly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Savings Account (HSA), Health Reimbursement Account (HRA), and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave, and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

We are currently seeking a highly motivated and experienced Landscape Equipment and Fleet Mechanic Assistant. The Mechanic Assistant will repair and perform preventative maintenance on all company equipment.What would my responsibilities be · Perform preventative maintenance and service a wide variety of landscape power equipment. This will include commercial mowers, 2 cycle equipment, utility vehicles, trailers and trucks.· Operate in a shop where an inventory of spare parts and supplies are maintained.· Operate safely and maintain shop in a clean, orderly manner.· Contribute to our safety culture by wearing assigned Personal Protective --Equipment (“PPE”).Why Join Yellowstone · Competitive hourly pay, paid weekly· Benefits package including health, dental and vision insurance, 401k with a company match· Industry-leading safety programs· Company provided safety gear· Equipped with optimal and most professional equipment· High profile customers, worksites, and landscape results -A company that values and appreciates YOURequirements· Legal authorization to work in the United States· A professional with a minimum of 2+ years repair experience with mowers, small engines, 2 cycle equipment, and utility vehicles.· Must possess a strong mechanical skill-set including knowledge of basic electrical systems, hydraulic systems, mower technology and engines, both gasoline and diesel.· Basic automotive repair experience.· Must have own tools.· Must have reliable transportation to the Branch or first job site· Safe driving record and ability to successfully pass a Motor Vehicle Report (“MVR”) a plusBecome part of the team dedicated to Excellence in Commercial Landscaping

Thank you for your interest in working for our Company. Recruiting the right talent is crucial to our goals. On April 1, 2024, 3M Healthcare underwent a corporate spin-off leading to the creation of a new company named Solventum. We are still in the process of updating our Careers Page and applicant documents, which currently have 3M branding. Please bear with us. In the interim, our Privacy Policy here: https://www.solventum.com/en-us/home/legal/website-privacy-statement/applicant-privacy/ continues to apply to any personal information you submit, and the 3M-branded positions listed on our Careers Page are for Solventum positions. As it was with 3M, at Solventum all qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.Job Description:3M Health Care is now SolventumSolventum is seeking Electromechanical Maintenance Technician candidates to join our team in Flemington, NJ!Shift Options: 1st, 2nd or 3rd Shift (see under “Your Skills & Expertise”)Starting Pay: $40.06/hour + shift differentialsAt Solventum, we enable better, smarter, safer healthcare to improve lives. As a new company with a long legacy of creating breakthrough solutions for our customers’ toughest challenges, we pioneer game-changing innovations at the intersection of health, material and data science that change patients' lives for the better while enabling healthcare professionals to perform at their best. Because people, and their wellbeing, are at the heart of every scientific advancement we pursue.We partner closely with the brightest minds in healthcare to ensure that every solution we create melds the latest technology with compassion and empathy. Because at Solventum, we never stop solving for you.The Impact You’ll Make in this RoleAs an Electromechanical Maintenance Technician, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by:Troubleshooting, maintaining, and repairing mechanical and electrical equipment such as: AC/DC drives and motors, PLC’s, HMI’s, VFD’s, robotics, process controllers, stepper & servo motors, fire protection equipment, hydraulic and pneumatic devices, and plant support equipment.Installing, modifying, and upgrading electrical, electronic, mechanical, and computer equipmentSupporting the engineering, production, and maintenance of production, converting, assembly and packaging equipment.Troubleshooting, installing, and start-up of new equipment.Focusing on Continuous Improvement projects to drive improvements in OEE.Completing other duties as assigned or necessaryPossessing the ability to clearly speak, understand, and write in English to communicate effectively in both verbal and written contexts.Your Skills and Expertise To set you up for success in this role from day one, Solventum requires (at a minimum) the following qualifications:Associate degree or higher AND a minimum of two (2) years of industrial maintenance experienceOR High school diploma/GED AND a minimum of four (4) years of industrial maintenance experienceANDIn addition to the above requirements, the following are also required:Prior troubleshooting and repair experience with pneumatic, hydraulic, and electrical systems in an industrial environment.Ability to work one or more of the following shifts:1st Shift: M-F; 7am - 3pm2nd Shift: M-F; 3pm - 11pm3rd Shift: M-F; 11pm - 7amAbility to work weekends, overtime, or holidays as neededAdditional qualifications that could help you succeed even further in this role include:Two (2) year technical degree/diploma in a multi-craft technology program.Bachelor’s degree or higher in mechatronics, industrial electronics, robotics and automation, or engineering technologyAdvanced troubleshooting and repair experience working with pneumatic, hydraulic, and electrical systems in an industrial environment.Experience with reliability analysis, predictive (PdM), and preventative maintenance (PM)Demonstrated proficiency working with electro-mechanical equipment such as pumps, AC/DC motors, motor drives, PLC troubleshooting, etc.Experience with Automation Controls, Robotics and Industrial LasersExcellent technical communication skills, both written and oral to a diverse audience.Ability to read and understand mechanical and electrical drawingsDemonstrated strong problem-solving and computer skills.Possess excellent documentation skillsWork location: Onsite - 500 US Highway 202, Flemington, NJ 08822Travel: No TravelRelocation Assistance: Not AuthorizedMust be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).Supporting Your Well-beingSolventum offers many programs to help you live your best life – both physically and financially. To ensure competitive pay and benefits, Solventum regularly benchmarks with other companies that are comparable in size and scope.The starting rate of pay for this position is $40.06/hour, with the potential to reach $47.71/hour. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate’s relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: https://www.solventum.com/en-us/home/our-company/careers/#Total-RewardsResponsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Solventum is committed to maintaining the highest standards of integrity and professionalism in our recruitment process. Applicants must remain alert to fraudulent job postings and recruitment schemes that falsely claim to represent Solventum and seek to exploit job seekers.Please note that all email communications from Solventum regarding job opportunities with the company will be from an email with a domain of @solventum.com. Be wary of unsolicited emails or messages regarding Solventum job opportunities from emails with other email domains.Solventum is an equal opportunity employer. Solventum will not discriminate against any applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.Solventum Global Terms of Use and Privacy StatementCarefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at Solventum are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with theterms.

99 South Black Horse Pike, Runnemede, NJ 08078Automotive Service Technician / Mechanic Top Techs Earn $100,000 Plus!$2,500 Sign-on Bonus for A and B Level Techs!Shop averaging 650 hours per week!Hiring now for Technicians of All LevelsLooking for Techs from New Jersey, Philadelphia or DelawareWork with the best brand in the business!Tool RelocationFlat Rate PayEarn the Money you Deserve!40-hour Guarantee. Every Other Saturday!If You Do Not have Service Tech Experience,Please Do Not ApplyWalk-in Applicants are Welcome!Business is booming! Now is the perfect time to continue your Automotive Service Technician career with Toyota of Runnemede!Come join us in our state-of-the-art facility. We need Service Techs of all levels. This rewarding opportunity won't last long - apply today!At Toyota of Runnemede, we have a strong and committed sales staff with many years of experience satisfying our customers’ needs. We treat the needs of each individual customer with paramount concern.We believe culture makes a difference and we strive to build lasting relationships with our employees, customers, and the community. We value our employees and invest in their success and offer the most competitive and aggressive pay plan in the area!We offer: Competitive pay plan$2,500 Sign-on Bonus for A and B Level Techs!40-hour guarantee. Every other Saturday!Shop averaging 650 hours per week!Medical and Dental insurance availableTool relocationFlat Rate PayPerformance-based bonusesClimate-controlled shop401(k)Paid vacation and holidaysStrong “team-work” environmentResponsibilities - Service Technician:Communicate with customers and/or service advisors for a description of vehicle problems, discuss work to be performed, and any anticipated future repairs.Repair / service all vehicle systems such as brakes, A/C, tires, transmission, engine, oil changes, fluid flushes, warranty work, and recalls.Test and adjust required systems to meet manufacturers' performance specifications.Test-drive vehicles, test components, and systems.Keep training up to date.Keep abreast of the federal, state, and local regulations that affect operations; comply with hazardous waste disposal and OSHA Right-to-Know regulations; provide necessary training on these regulations and ethical practices.Be prepared to work extended hours when necessary to achieve goals.Qualifications/Requirements - Service Technician:Experience requiredLocal applicants onlyMust have own toolsMust be able to use a variety of computerized systemsMust hold a valid driver's license.Team-oriented, flexible and focused on maintaining a high level of customer service.Computer skillsUphold the highest ethical standardsUpload resume and complete online assessment for immediate considerationApplicants must pass pre-employment testing to include background checks, MVR, and drug screening.We are an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Job SummaryUPS is currently hiring Building and Systems Engineering (BaSE) Mechanics. This position is responsible for maintenance activities that are performed to keep a UPS package handling facility operating efficiently and effectively. The work is fast-paced and requires routine interaction with other hub employees. Ideal candidates must be available to work 1st, 2nd, or 3rd shift, in a 24 x 7 operation. This position requires strong electrical background and must pass electrical assessment.Responsibilities:·Troubleshooting, adjusting, and replacing AC and DC electrical equipment such as batteries, control stations, fuses, motor starters, relays, switches, timers, servo driven equipment, photo electrical devices, transducers, Variable Frequency Drives (VFD’s) and encoders·Inspecting, troubleshooting, repairing, and/or replacing mechanical components such as motors, reducers, drive chains, sprockets, sheaves, pulleys, rollers, conveyor belts, bearings, and transfer plates·Inspecting, troubleshooting, repairing, and/or replacing pneumatic equipment such as diverters, lubricators, hoses, and coils·Inspecting, troubleshooting, repairing, and/or replacing hydraulic equipment such as hoses, fittings, cylinders, and pumps·Welding equipment such as handrails, conveyor supports, package handling equipment, carts, and grating as defined by scope of work·Performing preventive maintenance inspections of plant equipment such as conveyors, bulk carts, and power industrial equipmentOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $38.02 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Starting Hourly Rate $23.50 USD per hour. The pay range per hour is $23.50 - $30.81Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .About us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting products to the guest as fast as possible, a critical differentiator, and one of the most essential Logistics functions. You will reach beyond the bounds of your team to collaborate across the enterprise and find solutions to support the business. Whether it is through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you will have a chance to positively affect thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As a Facility Attendant 1, you will perform a wide variety of minor maintenance tasks in addition to all other duties as assigned pertaining to the general upkeep and maintenance of the Distribution Center. This includes, for example:Support Maintenance Technicians in performing mechanical preventative and corrective maintenance throughout the facility, such as servicing and repair of hand tools and minor floor machines.Act as a Qualified Electrical Assistant for electrical safety processes.Support maintenance personnel in installation/removal of assorted items of equipment throughout the facility.Evaluate and inspect the interior/exterior of the facility to determine general upkeep or repair requirements.Change PIT (Powered Industrial Truck) batteries, perform preventative and corrective maintenance on batteries, keep battery equipment clean and painted, keep battery-changing records, and turn in records at shift end.Complete maintenance, cleaning, and troubleshooting of Label Tec PrintersOperate hand and power tools such as drills, saws, sanders, grinders, pneumatic tools, and welders.Construct or repair assets within the facility such as assembling furniture, building shelving or racks, and repairing workbenches utilizing skilled carpentry, welding, and fabrication as required.Complete plumbing tasks such as installation or repairing of faucets and landscape sprinklers, clean stopped drains and clean sumps and drains as required.Perform tasks such as painting and drywall repairs, concrete patching, or minor concrete replacement.Assist in all duties related to the preventive maintenance programs, such as pest control, HVAC, and update records associated with these programs.Remove cardboard bales from bailers, remove trash from buildings using large portable dumpsters, and keep building grounds in a neat and orderly manner.Operate snow removal equipment to clean all walks, roads, and parking lots as assigned.Drive Target owned vehicles to execute yard cleanup, respond to yard incidents, escort vendors, and pick up parts and materials as required.Operate all power equipment in a safe manner, always use safe lifting techniques, and promptly assist in spill cleanup to avoid risk of accidents to team members throughout the facility.Complete necessary paperwork or requisitions for materials as requested, keep daily work order logs for all workUtilize handheld devices and mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Follow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating safety hazards[F&B Only:] Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Core responsibilities of this job are described within this job description. However, job duties may change at any time due to business needs.Physical Demands (must be able to perform with or without reasonable accommodation):Lift and carry merchandise weighing up to 47 lbs. regularly, and up to 60 lbs. on an infrequent basis Move about within and around the site with great frequency (up to 10-12 hours per shift)Work in various temperature-controlled environments including temperatures below freezing (Food Distribution Center only)Work in conditions that may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAccess all areas of the Distribution Center, including the ability to travel on conveyor crossovers and reach mezzanine platforms Have full manual dexterity in both hands and wrists, eye/hand coordination, feet (e.g., operating foot pedals), manual (e.g., picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)About you: Possess or ability to obtain a valid driver’s licenseWork both independently and in a team environment[F&B Only] Comfortable working in a temperature-controlled environmentEffective communication skillsAccurately uses basic math skillsAble to be certified to operate all power equipmentAble to use maintenance tools; saws, drills, etc.Able to read and comprehend labels, tickets, instructions, etc.Able to work with minimal supervision and self-motivateBenefits EligibilityPlease paste this url into your preferred browser to learn about benefits eligibility for this role: https://tgt.biz/BenefitsForYou_C | Pegue esta URL en su navegador preferido para obtener información sobre la elegibilidad de este puesto para recibir beneficios: https://tgt.biz/BenefitsForYou_CAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.

Fuel Your Career with Us!Are you a skilled Diesel Mechanic looking for your next opportunity Join our team at Interstate Waste Services and put your expertise to work!They pay for this position is $31.47/Hr.Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety.Requirements3+ years’ experience working as a heavy-duty Diesel MechanicHydraulics experience is highly preferredEngine and transmission maintenance and repairs Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar.Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components.Maintain and repair exhaust systems equipped with DPF systems.Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. Must be able to provide own tools.A valid driver’s license is required.Interstate Waste Services – IWS – is hiring aDiesel Mechanicfor our Goshen Transfer Station location. This is an opportunity to work hard, make good money, and grow asuccessful careeras a Diesel Mechanic.OurDiesel Mechanicsperform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. This specific role with deal primarily with ourtractor trailer division. Utilizing diagnostic software, the Mechanic is responsible for interpreting failure modes and initiate or assign necessary repairs. At times, the Mechanic may be on call, and required to assist with emergency breakdowns.If you have experience or training as aDiesel Mechanic– apply now to join our team of dedicated, skilled tradesmen. We believe in providing the training and development you need to grow your career with IWS. Check out our YouTube channel to hear what our employees have to say about working with us.RequirementsApplicants must be at least 18 years of age and legally eligible to work in the United States.A valid driver’s license is required. CDL preferred.Experience working on heavy duty diesel equipment OR training from a recognized trade school is required.Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records.The Diesel Mechanic position may be required to lift up to 50 pounds. Frequent squatting and standing is required. Candidates must be able to meet the physical and safety requirements of the position.Must be able to provide own toolsother duties as assignedEntry-level candidates will be considered for this position and on-the-job training provided. Candidates with the following experience may be considered for a Mechanic B or A level position which has a higher level of responsibility as well a compensation:2+ years experience working as a heavy duty Diesel MechanicExperience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar.Yellow Iron experience and/or experience as a Mechanic or Technician for a refuge company is a plus.Working knowledge of applicable DOT and OSHA standards and regulations.Other duties as assigned.IWS is committed to providing a world class work place to all employees. Each eligible employee receives a competitive total compensation package including, hourly pay based on experience and paid overtime, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Vacation, Holidays, and Personal Days.We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers.IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law.USD $31.37/Hr.USD $31.47/Hr.

Move forward with us! At NJ TRANSIT, you'll join us in transforming the third-largest transportation agency in North America. We are committed to delivering safe, reliable service that gets customers to their destinations on time–and we're looking to hire talented folks with a commitment to excellence to make it all possible. Summary: This position presents the exciting professional opportunity for you to use your talents and energy to conduct a variety of testing, repair, installation and maintenance task on electronic equipment for our bus team. The electronic equipmentincludes fare collection, destination sign, Smart bus and video surveillance systems. Roles and Responsibilities: Troubleshoots and repairs electronic equipment either on site or in Electronic Shop.Bench troubleshoots defective microprocessor based equipment to identify problem components and makes necessary repairs. This entails repairing through hole and surface mounting printed circuit board.Tests and troubleshoots fare collection, destination sign, smart bus andvideo surveillance systems. Ensures spare equipment availability for use at the garages.Test radio, fare collection, destination sign, smart bus and video surveillance systems to ensure proper operation.Installs fare collection, destination sign, smartbus and video surveillance systems into buses.Operates motor vehicle to drive to remote locations to perform task. Education, Experience, and Qualifications: Degree or certificate in electronics or related field.Experience in electronics, troubleshoot and repair PCB at component level required.Usage of hand tools, possess a valid non-provisionary motor vehicle license to operate a NJT vehicle, troubleshooting problems, reading schematicsrequired.Able to solve problems, communicate in written form and orally, as well as following instructions. At NJ Transit you will enjoy a competitive salary and excellent benefit package: Full benefit package including medical, prescription, dental & visionPension plan plus 457 tax-deferred savings planGrowth OpportunitiesPaid time offStarting Salary: $35.08/hour At NJ TRANSIT, diversity and inclusivity are vital to our success as we are committed to hiring individuals from diverse backgrounds, experiences, abilities, and veteran status. As an Equal Opportunity Employer, we encourage all qualified applicants to apply and join our team. Learn more about NJ TRANSIT! Sign up to receive an invitation to our next live information session atWWW.NJTRANSIT.COM/BEST

Line of Business: OtherAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine and preventive maintenance on mobile equipment.Diagnose and repair mechanical, electrical, and hydraulic issues.Maintain accurate records of all maintenance and repair work.Ensure compliance with safety regulations and company policies.Collaborate with team members to improve equipment performance.Order parts, tools and equipment for necessary repairsPerform DOT inspections on tri-axles and trailersWhat Are We Looking ForStrong mechanical aptitude and problem-solving skills.Proficiency in diagnosing and repairing mobile equipment.Ability to read and interpret technical manuals and schematics.Effective communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must possess a valid driver's license, CDL and maintain a clean driving record.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$35-40 per hour, 401(k) retirement savings plan with an automatic company contribution as well as matching contributions, highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: Cement & WhiteAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingInstall, maintain, and repair electrical systems and equipment.Troubleshoot and diagnose electrical issues efficiently.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, sensors. Troubleshoot equipment including VFD, multilin. Rewires motors.Collaborate with team members to complete projects on time.Maintain accurate records of work performed.What Are We Looking ForIndustrial Electrician experience required; 5 years overall electricianexperience required.Certification as an Industrial Electrician; or equivalent combination of education and training required.Abilityto apply concepts of basic algebra and geometry in practical situations.System knowledge of HMI and PLC control systems. Rockwell/Allen Bradley experience preferredEffective communication and teamwork abilities.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, elevated noise level and working extended hours as needed.What We Offer$36.00 to $42.00 per hour.Company benefits for Medical, Dental, Vision, Disability and more.Union paid PTO, and holidays. 401K match.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Overview: With over 150 years of experience,and headquartered in Southern CA, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets.The Lima team, CoolSys Energy Solutions (CES), specializes in complex, custom, and energy-efficient mechanical and plumbing systems. They provide best-in-class application engineering and equipment services tailored to individual client needs. The division focuses on a systems perspective for projects, ensuring the best total system efficiency and lowest life cycle cost. We offer exclusive representation and sales/services for commercial and industrialHVAC and plumbing equipment manufacturers serving various industries including biotechnology, pharmaceutical, clean rooms, hospitals, data centers, and more.WHY JOIN USWe understand that hiring great people is the foundation of everything we do. Our employee benefits packages include:Competitive pay $80k AND commission to be discussed, uncapped ($150k Plus)Medical, Dental, Vision and Prescription coveragePaid vacation and holidays401(K)matchLife insurance, AD&D and long-term disabilityTuition reimbursementOpportunities availablenationwideEmployee discountson vehicles, hotels, theme parks, select cell phone bills and so much morePet InsuranceLegal Plan, and ID Theft Protection Responsibilities: This is a full-time on-site role for a Sales Engineer at Lima Energy Solutions in PA. The Sales Engineer will be responsible for providing technical support, sales engineering, effective communication with clients, sales activities, and customer service to ensure client satisfaction in the Tri-state areas.QualificationsSales Engineering and Technical Support skillsExcellent Communication and Sales abilitiesCustomer Service expertiseExperience in HVAC and plumbing systems is a plusStrong problem-solving and analytical skillsBachelor's degree in Engineering or related fieldPrevious experience in sales or technical support roles Qualifications: Excellent verbal and written communication skills. Excellent sales and customer service skills with a proven ability to explain technical products to non-technical audiences.Ability to apply engineering, technology, or other related principles to product sales.Excellent organizational skills and attention to detail.Proficient with Microsoft Office Suite or related software.Bachelor’s degree in Engineering or field related to products and services being sold,preferred.1-3+ years of industry-based experience PREFERREDProlonged periods of sitting at a desk and working on a computer.Must be able to lift, up to 15 pounds at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookand Twitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

7AM-7PM (Wed/Thurs-Sat) - 3/4 scheduleWhat this job involves – You will be responsible for installing, maintaining, and repairing electrical systems in commercial and industrial buildings managed by JLL. You will ensure that all electrical work meets safety standards, building codes, and client specifications.What is your day to day Install, maintain, and repair electrical systems, including wiring, circuit breakers, transformers, and lighting fixtures.Read and interpret blueprints, schematics, and electrical drawings.Troubleshoot electrical issues and perform necessary repairs.Conduct regular inspections of electrical systems to ensure safety and compliance with regulations.Install and maintain building automation and energy management systems.Perform preventive maintenance on electrical equipment and systems.Collaborate with other trades and facility management team members on projects and maintenance tasks.Respond to emergency electrical issues in a timely manner.Maintain accurate records of work performed, including time and materials used.Adhere to all safety protocols and regulations, including OSHA standards.Stay current with industry trends, new technologies, and best practices in electrical work.Desired experience and technical skills Required Minimum of 3-5 years of experience as a commercial or industrial electrician.Strong knowledge of National Electrical Code (NEC) and local building codes.Proficiency in using electrical testing equipment and hand tools.Ability to read and interpret electrical schematics and blueprints.Experience with building automation systems and energy management systems is a plus.Strong problem-solving skills and attention to detail.Excellent communication and customer service skills.Ability to work independently and as part of a team.Willingness to work flexible hours, including occasional nights and weekends for emergency calls.Preferred High school diploma or equivalent; vocational training or associate's degree in electrical technology preferred.Valid electrician's license as required by the state of New Jersey.Physical RequirementsAbility to lift and carry up to 50 pounds.Comfortable working at heights and in confined spaces.Able to stand, walk, climb, and maintain balance for extended periods.#Ejobs

In our tuition-free Tech Fundamentals program, you will master the basics of IT with real-world applications. What’s Included in Tech Fundamentals - Up to 20 weeks of instructor-led virtual training - Opportunity for a paid internship or a project-based learning experience - Opportunity to earn industry-recognized certifications: CompTIA A+ & IT Fundamentals+, a Google IT Support Certificate, and an IT Generalist Apprenticeship credential - Exposure to Microsoft, Cisco, AWS, and other leading technologies - Mentoring from senior-level IT professionals - Employment readiness workshops - Job placement assistance with access to a wide range of top employers - A full range of ongoing social service and personal development support Who is Eligible Young Adults - 18–26 years of ageHigh school diploma or equivalent - Legally authorized to work in the US - Located in or near the following cities:Baltimore, Brooklyn/New York City, Dallas, San Antonio, Houston, Detroit, Newark, St. Louis, Kansas City, Raleigh, Dayton Military Veterans and Military Spouses - Over 21 years of age - Legally authorized to work in the US - Must be one of the following: Transitioning active-duty service member through the DoD SkillBridge program / honorably discharged / member of the Guard or Reserves - In or near the following cities: Baltimore, Dallas, San Antonio, Houston, Detroit, Newark, St. Louis, Kansas City, Raleigh, Dayton

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Tech I to join our UniFirst community. As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime! We have an immediate opening and provide on the job training. What’s in it for you Training:Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth:You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture:Our culture is what makes UniFirst an organization that stands out from the rest.Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful. Compensation:$28 - $33/hrWhat you’ll be doing: Utilize hand/power tools, precision measurement tools, and electronic testing devices. Ensure safe operation of machinery, mechanical electrical, pneumatic, and hydraulic systems and components. Follow blueprints, schematics, operation manuals, manufacturer’s instructions, and engineering specifications. Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required Perform daily and weekly safety checks on boilers and make necessary repairs as required. Record and analyze meter readings of utilities in long and take corrective actions when necessary. Perform daily and weekly location/system safety checks and follow up to address concerns.Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System.Perform other duties as assigned by leadership.QualificationsWhat we’re looking for:High school and/or GED is preferred.Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age.Valid driver’s license and a safe driving record are required. Knowledgeable in maintenance equipment.Minimum of 6 months’ work experience repairing industrial processing equipment in a production environment is required. Applicable military experience will be considered. Must pass UniFirst’s maintenance knowledge assessment test to be eligible for employment.Ability to read blueprints and schematics is required.Ability to read and understand maintenance literature printed in English is required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is requiredAbility to work overtime as needed is required.Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. There’s a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingAssist in the maintenance and repair of mechanical equipment.Learn and apply safety protocols and procedures.Perform routine inspections and diagnostics.Collaborate with experienced mechanics to develop skills.Maintain accurate records of repairs and maintenance activities.What Are We Looking ForStrong interest in mechanical systems and repair.Ability to learn and apply new skills quickly.Effective communication and teamwork abilities.High level of attention to detail and accuracy.Capability to work in various weather conditions and environments.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$26.88 per hour.Benefits through the Union for Medical, Dental, Vision and PensionUnion paid vacation, sick leave and holidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

We are seeking experiencedCrew Leaders to work safely in the field for our Maintenance division.You will be a working team member who oversees all aspects of a crew from start to completion.What would my responsibilities be Supervise all lawn maintenance service activities of the crew,ensuring that all crew members have the required safety material, the training and tools needed to complete the job, and that they are always operating safely.Complete a pre-trip inspection report each day.Coordinate with branch management, customers, and employees as needed.Use landscaping tools and operate heavy equipment as needed. Safely drive crews to and from jobs, adhering to the Company's Safety Policy and ensuring that the public will be safe while in contact with crews.Why Join Yellowstone Competitive hourly pay,paid weeklyBenefits package including health, dental and vision insurance, 401k with a company matchIndustry-leading safety programsCompany provided safety gearEquipped with optimal and most professional equipmentHigh profile customers, worksites, and landscape results -A company that values and appreciates YOURequirementsLegal authorization to work in the United StatesExperience managing a crew consisting of laborers providing landscaping or related servicesMust have reliable transportation to the Branch or first job siteSafe driving record and ability to successfully pass a Motor Vehicle Report (“MVR”) requiredStrong English communication skills. Spanish a plusBecome part of the team dedicated to Excellence in Commercial Landscaping

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Seeking a reliable Mechanic Journeyman to join our outstanding fleet maintenance team. The Automotive Technician will be responsible formaintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel andgasoline. Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls.Automotive Technicians must be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Automotive Technicians?must possess the required hand tools required to perform the applicable job assignment. ?Responsibilities and DutiesMeets D.O.T requirements required by job assignmentBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required,?throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsRequirementsMust have an active driver’s license issued by the stateMust be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Must possess the required hand tools required to perform the applicable job assignment. ?Must have experience with trailers and tractors.Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsClass A/Bor A Commercial Driver's License (CDL) - PreferredDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $39.25 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Schedule: Monday - Friday 8:00 AM - 6:00 PM, Occassional Satuday 6:00 AM - 2:00 PMInterstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety.What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture.Our Yellow Iron Diesel Technicians/Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs, but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks)Performs repairs and assigned preventative maintenance services. Estimates time and material cost on vehicle repairs and requisition of new parts. Conduct safety checks on vehicles.Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time. Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports. Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards. This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts.Assists Sr. Technicians in the completion of project work.Applicants must be at least 18 years of age and legally eligible to work in the United States. A valid driver’s license is required. CDL a plus. At least 5 years of experience in job duties. Sanitation or construction industry experience a plus.Computer diagnostic experience as diesel technician a plus.Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar. Working knowledge of applicable DOT and OSHA standards and regulations. Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records. Must be able to meet the physical and safety requirements of the position.Must be able to provide own toolsWork EnvironmentWe are continuously investing in equipment, and many of our trucks are less than 2 years old. Potentially hazardous work environment with many moving parts and machinery; must always be alert of surroundings.Only during breakdowns will this position be required to enter transfer station loading/ dumping area.Personal Protective Equipment (PPE) will be provided.The Yellow Iron Diesel Technician/Mechanic may be required to lift upwards to 50 pounds. Frequent squatting and standing are required. This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice.Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment andprohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.USD $25.00/Hr.USD $32.00/Hr.

Move forward with us! At NJ TRANSIT, you'll join us in transforming the third-largest transportation agency in North America. We are committed to delivering safe, reliable service that gets our customers to their destinations on timeand we’re looking to hire talented folks with a love of learning to make it all possible Job Title- Superintendent, Contract Oversight Maintenance of Equipment Summary: Reporting to the NJ Transit Director Light Rail Operations and Business Administrator. Manages and monitors the Design, Build, Operate and Maintain (DBOM) activities of the Contractor in all related aspects of that Operation. Responsible for ensuring that the interests of NJ Transit are protected and that the Contractor meets or exceeds requirements of service quality management in providing the customer with clean, safe, and reliable transportation. Roles and Responsibilities Reviews and analyzes the operating policies and procedures of the contractor based upon the accepted “best practices’ of the industry.Reviews Daily Reports to ensure that incidents, unusual occurrences, or accidents are reflected accordingly.Ensures that the Contractor follows “best practices” and contractual requirements in relations with Local, County, State and Federal Governmental entities; liaisons with NJ Transit Governmental Affairs, Corporate Communications, NJTPD, and other NJ Transit departments and divisions as required.Coordinates with the Contractor with the review of plans to ensure the compliance with NJ Transit Engineering Standards, the proper issuance of permits, establishment of Temporary Access Permits, and third-party compliance.Supervises O&M compliance in the areas of Maintenance of Equipment – LRT Rolling Stock: Daily Inspections, Scheduled Inspections, Preventative Maintenance, Overhaul activity.Works with the Contractor in conceptual planning and design for system wide enhancement and improvement in the areas of maintenance to ensure no adverse service impacts to the public are incurred.Monitors the Capital Asset Replacement Program and provides input to Capital Budget Preparation and Variance analysis.Backfills the duties and responsibilities of the NJ TRANSIT Director Light Rail Operations and Business Administrator as needed/directed. May also be deployed to perform same functions at River Line and/or Newark Light Rail as directed/needed This Position Supervises: Vendors and related activities Education, Experience and Qualifications / KNOWLEDGE & SKILLS REQUIRED Bachelor’s Degree in Engineering, Transportation, Industrial Management, or Business Administration or a related fieldand seven (7) years of closely related experience in LIGHT RAIL VEHICLE MAINTENANCE. Must possess progressive experience in managing/supervising all facets of RAILWAYMAINTENANCE OF EQUIPMENT (MOE) programs/systems.Experience in contract management.One year of closely related experience can be substituted for year of education required. Knowledge and Skills: Excellent verbal and written skills with experience in the oversight of and/or the conduct of a performance/operating contract is strongly preferred.Knowledge of local, state, and federal governing policies and regulations as related to the discipline of equipment maintenance in a Light Rail environment is strongly desired. Certificates, Licenses, Registrations Working Environment Office and Field Environment Physical Demands Sitting, standing, walking, climbing, walking on ballast in a storage yard or along the Right of Way, stepping over Rails. Working in a Shop Environment. Other Conditions Year round outside work At NJ Transit, you will enjoy a competitive salary and excellent benefits package: Comprehensive Family Health Insurance – Medical, Prescription, Dental, VisionFlexible Spending AccountLife InsurancePaid LeaveTuition AssistancePre-Tax Commuter BenefitsPlanRetirement Plans401(a) - Retirement plan with a 6% employer contribution401(k) - Retirement saving plan with up to an 3% company match457(b) - Deferred Savings Plan At NJ TRANSIT, diversity and inclusivity are vital to our success as are committed to hiring individuals from diverse backgrounds, experiences, abilities, and veteran status. As an Equal Opportunity Employer, we encourage all qualified applicants to apply and join our team. Learn more about NJ TRANSIT! Sign up to receive an invitation to our next live information session atWWW.NJTRANSIT.COM/BEST INDCO1

Line of Business: OtherAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine and preventive maintenance on mobile equipment.Diagnose and repair mechanical, electrical, and hydraulic issues.Maintain accurate records of all maintenance and repair work.Ensure compliance with safety regulations and company policies.Collaborate with team members to improve equipment performance.Order parts, tools and equipment for necessary repairsPerform DOT inspections on tri-axles and trailersWhat Are We Looking ForStrong mechanical aptitude and problem-solving skills.Proficiency in diagnosing and repairing mobile equipment.Ability to read and interpret technical manuals and schematics.Effective communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must possess a valid driver's license, CDL and maintain a clean driving record.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$35-40 per hour, 401(k) retirement savings plan with an automatic company contribution as well as matching contributions, highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: Cement & WhiteAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingInstall, maintain, and repair electrical systems and equipment.Troubleshoot and diagnose electrical issues efficiently.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, sensors. Troubleshoot equipment including VFD, multilin. Rewires motors.Collaborate with team members to complete projects on time.Maintain accurate records of work performed.What Are We Looking ForIndustrial Electrician experience required; 5 years overall electricianexperience required.Certification as an Industrial Electrician; or equivalent combination of education and training required.Abilityto apply concepts of basic algebra and geometry in practical situations.System knowledge of HMI and PLC control systems. Rockwell/Allen Bradley experience preferredEffective communication and teamwork abilities.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, elevated noise level and working extended hours as needed.What We Offer$36.00 to $42.00 per hour.Company benefits for Medical, Dental, Vision, Disability and more.Union paid PTO, and holidays. 401K match.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation:Competitive pay from$25-$45 per hour DOE. Sign on Bonus: up to $3,000.00 DOEOngoing Education & Training:Access to state-of-the-art facilities and paid online training.Comprehensive Benefits:Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work:Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks:Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time.Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectationsProvides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner.Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base.Test malfunctioning systems and components using electrical and/or mechanical skills.Maintain legible corporate and personal records of work history.Provides department support by processing job tickets, and work orders to the necessary department promptly.Provide support by picking up, delivering, and installing cases.Perform work on minor construction and remodeling projects including startups of new installations.Drives company vehicle in a safe manner.Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED.EPA certification.Certification from an accredited vocational-technical or trade school is a plus!Minimum 5+ years of commercial refrigeration experience required.Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus.Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.Must have a good driving record and be able to work independently.Emergency on-call availability is a basic requirement.Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Forbes List of America's Best Employers Move forward with us! At NJ TRANSIT, you'll join us in transforming the third-largest transportation agency in North America. We are committed to delivering safe, reliable service that gets our customers to their destinations on timeand we’re looking to hire talented folks with a love of learning to make it all possible. Under the direction of the Superintendent or Foreman, a Special Mechanic - Welder is responsible for repairingNJ TRANSIT buses for maintenance work and handle welding tasks. Main Functions: Conducts a variety of testing, repair, installation and maintenance tasks on equipment including engines, brake systems, suspension, steering, electronics, electrical systems, HVAC, transmission, and painting equipment, as well as: 1.Ability to understand and carry out written and verbal instructions and follow established policies and procedures. 2.Be able to diagnose and repair all electric I/O Controls and Multiplex Wiring Systems. 3.Have the ability to complete wiring conversion for buses with 12v, 24v, 110v and High voltage (EV buses). 4.Must have the mechanical ability. Be able to disassemble and reassemble complete electrical components. 5.Must have a working knowledge of reading electrical schematics. Be able to diagnose and repair electrical faults including wiring repair. 6.Be able to diagnose and repair electrical components on all computer-controlled engines and transmissions. 7.Must have the ability to trouble-shoot, analyze and implement effective solutions for operational faults on hybrid vehicle systems and components. 8.Be able to trouble-shoot and repair all electrical components. 9.Working knowledge of air conditioning and electrical systems. 10.Must be able to diagnose and program with a computer all engines, transmissions, and various other systems (i.e., HVAC etc.). 11.Demonstrate ability in the proper use of tools and diagnostic equipment. 12.Must be able to use and read parts manual and be able to fill out required forms. 13.Must be willing to work overtime when required. 14.Must keep area clean, uncluttered, and safe. Must follow established shop safety policies and procedures. Education and Experience Requirements: Must have a high school diploma or GED, ASE certification a plusMust have a CDL licenseMust have five years' experience in the welding field.Be able to pass the pre-employment physical and background checksMust be certified and able to supply copies of prior certifications and able to read blueprints, sketches, and drawingsMust be willing to work overtime when required At NJ TRANSIT, you will enjoy a competitive salary and excellent benefit package: Full benefit package including medical, prescription, dental & visionPension plan plus 457 tax-deferred savings planGrowth OpportunitiesPaid time off At NJ TRANSIT, we support and depend upon the diversity of our staff. NJ TRANSIT is an Equal Opportunity Employer. This position is deemed safety sensitive per the Department of Transportation (DOT) Drug and Alcohol Testing Regulations. The DOT Drug and Alcohol Testing Regulation 49 CFR Part 40 does not authorizethe use of marijuana for any reason. It is unacceptable for any safety-sensitive employee subject to drug testing under DOT regulations to use recreational or medical marijuana. The prohibitionincludes any derivative of marijuana such as CBD oils, teas, etc. The use of recreational and medical marijuana is a violation of NJ TRANSIT’s Drug and Alcohol-Free Workplace Policy for safety-sensitive employees. INDBU2

Line of Business: OtherAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine and preventive maintenance on mobile equipment.Diagnose and repair mechanical, electrical, and hydraulic issues.Maintain accurate records of all maintenance and repair work.Ensure compliance with safety regulations and company policies.Collaborate with team members to improve equipment performance.Order parts, tools and equipment for necessary repairsPerform DOT inspections on tri-axles and trailersWhat Are We Looking ForStrong mechanical aptitude and problem-solving skills.Proficiency in diagnosing and repairing mobile equipment.Ability to read and interpret technical manuals and schematics.Effective communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must possess a valid driver's license, CDL and maintain a clean driving record.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$35-40 per hour, 401(k) retirement savings plan with an automatic company contribution as well as matching contributions, highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: Cement & WhiteAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingInstall, maintain, and repair electrical systems and equipment.Troubleshoot and diagnose electrical issues efficiently.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, sensors. Troubleshoot equipment including VFD, multilin. Rewires motors.Collaborate with team members to complete projects on time.Maintain accurate records of work performed.What Are We Looking ForIndustrial Electrician experience required; 5 years overall electricianexperience required.Certification as an Industrial Electrician; or equivalent combination of education and training required.Abilityto apply concepts of basic algebra and geometry in practical situations.System knowledge of HMI and PLC control systems. Rockwell/Allen Bradley experience preferredEffective communication and teamwork abilities.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, elevated noise level and working extended hours as needed.What We Offer$36.00 to $42.00 per hour.Company benefits for Medical, Dental, Vision, Disability and more.Union paid PTO, and holidays. 401K match.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $45-$58 depending on experience.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.JOB SUMMARYCoolSys Energy Solutions (CES) is currently seeking a CoGen Service Technician to inspect and diagnose on-site Power Generation and related equipment. Responsibilities: Must be thoroughly familiar and have detailed knowledge of all aspects of our product offerings including CHP and Balance of Plant (including not limited to HRSG, radiators, steam/hydronic boiler, absorption chiller, chiller, standby generators, automatic transfer switches, switchgear), island and parallel operation, Comap control system, Building Management Systems, all regarding assembly, repair, wiring, re-building, testing, and troubleshooting.Regularly travel to jobsite locations to perform preventive maintenance, corrective maintenance, unscheduled service, and troubleshooting, mechanical & electrical repairs on natural gas and biogas engines, generator sets, CHP power generation equipment, and related equipment.Monitoring system performance via remote control on-line, diagnoses technical malfunctions / operator errors, and provides solutions.Interface with system operators/field technicians and provides technical guidance.Performance of engine overhauls, electrical & mechanical testing, calibration and commissioning.Must provide clear and concise reports of all work performed daily for both internal and external reporting, observe and report conditions that could result in unscheduled or corrective maintenance, and communicate in a timely manner.Maintain designated project & service records, and practice consistent record keeping.Contribute to a pleasant and positive work atmosphere where all team members feel important and responsible.Adapt to the diverse needs of a small team and address internal and external requirements with flexibility and creativity.Regularly improve and update product knowledge by participating in educational and product training opportunities.This description contains information necessary to describe and evaluate the job. It should not be construed as a detailed description of all work performed but indicates the kinds of duties and skills expected.The position must complete other work tasks as assigned. Qualifications: The candidate must have a strong reciprocating engine and electrical background with the ability to display a high level of skill and understanding regarding internal combustion engines, generator sets, ideally natural gas engines, but will consider applicants that have experience with diesel standby or other engine technologies (e.g. compression engines).Will also consider technicians that have a more holistic background and excellent experience and trackrecord around complex technologies like aircraft engines and turbines.Be able to complete technical start-up of gas engines and CHP power systems.Independently diagnose and repair power systems.Basic working knowledge of advanced controls, safety shut-downs, circuit breakers and control panelwiring.Must be available to work over-time and occasionally travel on weekends.Must be able and willing to travel.Must be able to work independently.Excellent written and verbal communication skills and demonstratedproficiency composing writtencommunications.Outstanding interpersonal skills.Excellent telephone skills and computer knowledge.High energy level, comfortable performing multifaceted projects in conjunction with day-to-day activities.Resourceful, well organized, highly dependable, efficient and detail oriented.Must present a positive, professional, and team player attitude.Must be flexible and able to adapt to change quickly.Must possess a valid driver’s licenseExperience and knowledge of IP Networking including troubleshooting Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Move forward with us! At NJ TRANSIT, you'll join us in transforming the third-largest transportation agency in North America. We are committed to delivering safe, reliable service that gets customers to their destinations on time–and we're looking to hire talented folks with a commitment to excellence to make it all possible Summary: Manage day-to-day engineering operations for Newark Light Rail (NLR) systems, ensure the safety levels of its infrastructure, planning of capital and maintenance improvement projects, participate in post incident investigations, and routine interface and coordination with the Superintendents of Maintenance of Equipment and Transportation for daily operational requirements. Roles and Responsibilities: Responsible for the day-to-day engineering operation for Newark Light Rail (NLR) systems 24-hours, 7 days per week, which requires routine interface and coordination with the Superintendents of Maintenance of Equipment and Transportation for daily operational requirements.Responsible for ensuring that safety performance is a key priority throughout all levels of the NLR systems infrastructure, through the reliable and confirmed application of safety briefings, meetings and routine work-site and equipment inspections.Responsible for ensuring the proper oversight and implementation of the Roadway Worker Protection program.In coordination with the Safety Department, develops and implements employee safety and training programs for NLR infrastructure engineering.Schedules and controls all facets of the general maintenance process, to include preventative maintenance of all NLR systems, i.e., Traction Power Infrastructure (OCS & Substations), Train Control, SCADA, Track, Ventilation and Auxiliary Electrical/lighting; also responsible for the maintenance of the Vehicle Base Facility and NLR Penn Station infrastructure.Ensures all system assets are maintained to a state-of-good repair and reliability.Coordinates the planning of capital and maintenance improvement projects with Capital Planning & Programs, to include track outages, force account support and third party work activities/outages.Responsible for the preparation of plans, specifications, contract documents, testing methodology, proposals and cost estimates for all NLR improvement projects and products.Manages/monitors the administrative process for assigned projects, including the requisition process associated with MOW projects.Also, on an as-needed basis, makes timely/economic recommendations to change orders.Carries out consultant and technical service selections, and provides the technical support to LRT staff regarding questions and submittals based on technical input from consultants.Provides LRT management and personnel with engineering technical support and trouble-shooting expertise to analyze systems and component failures and trends; develops products and methods for maintenance and repair.As a primary member of the NLR Tiger Team, participates in post incident investigations and other events that could be enigmatic in nature, in an effort to determine root casual factors and reinforce and/or establish safe standard/practices.Responsible for the managing MOW budgets.Submits reports related to incidents, investigations, status, etc., as directed by the AGM.Manages/preserves an equitable labor relations process within the department that is consistent with prevailing agreements between NLR and the ATU.Officiate or delegates the conduct of MOW 1st Step Labor Hearings on an as-needed basis.Manages/monitors the maintenance and construction process, to include installation, testing, start-up and activation.Responsible for workforce development and career path implementation, to ensure a smooth and effective staff transition following the departure of more experienced employees.Administers the analysis, preparation, development, implementation, control and monitoring of the operating and capital budget for NLR infrastructure engineering to ensure long-term maintenance. This Position Supervises: Assistant Superintendent TrackAssistant Superintendent ET & SignalsForeman(s)Agreement Personnel Education, Experience, and Qualifications: Bachelor’sDegree in Electrical Engineering or related area or equivalent and five (5) years of experience in maintenance, design, construction and operation of electrified railway to include track, SIGNALS, TRACTION POWER and auxiliary systems for right-of-way operations; other auxiliary systems include auxiliary electrical and emergency evacuation tunnel ventilation systems.Must possess progressive experience in managing/supervising all facets of railway MOW programs/systems, and extensive knowledge and experience with supervising a railway agreement workforce, as well as a non-agreement/management staff charged with the direct supervision of agreement personnel and the MOW maintenance process.Must also possess a thorough understanding of railway safety issues and how those issues affect service, staff and customers is required Knowledge and Skills: Solid negotiation, customer service, time management, decision-making and communications skills (written and verbal) are required.Ability to work in a team environment. Excellent skills utilizing PC systems and MS Office (or similar) applications; Dimensions (Timekeeping), VMIS/Trapeze, SCADA, Emergency Ventilation, EPS (discipline system) and Oracle. Certificates, Licenses, Registrations & Working Environment: Office environment with occasional chances of being on the ROW for incidents/events/inclement weather.Physical Demands Other ConditionsThis position may involve periods of time in which stepping over rail and walking on uneven surfaces in the Yard or ROW will be necessary.Must be able to respond to NLR Incidents/Accidents as needed on 24-hours basis, 7-days a week. At NJ Transit, you will enjoy a competitive salary and excellent benefits package: Comprehensive Family Health Insurance – Medical, Prescription, Dental, VisionFlexible Spending AccountLife InsurancePaid LeaveTuition AssistancePre-Tax Commuter BenefitsPlanRetirement Plans401(a) - Retirement plan with a 6% employer contribution401(k) - Retirement saving plan with up to an 3% company match457(b) - Deferred Savings Plan At NJ TRANSIT, diversity and inclusivity are vital to our success as we are committed to hiring individuals from diverse backgrounds, experiences, abilities, and veteran status. As an Equal Opportunity Employer, we encourage all qualified applicants to apply and join our team. Learn more about NJ TRANSIT! Sign up to receive an invitation to our next live information session atWWW.NJTRANSIT.COM/BEST INDCO1