We are looking for an experienced Traffic Control Technician to join our team!
The Traffic Control Technician is responsible for setting up and taking down lane closures and ensuring the safety of assigned traffic control projects. This role involves performing lane closures on state highways and other roadways, redirecting traffic for workers or survey crews, and working independently or as part of a traffic control crew. Additionally, the role also involves assembling, delivering, and picking up safety products from job sites, following contractor directions.
Operate company trucks to transport materials and equipment to job sites. Drive MOT (Management of Traffic) vehicle to and from projects and on work sites. Drive TMA (Truck Mounted Attenuator) vehicle to and from projects and on work sites to protect workers and work zones. Place temporary construction signs in work areas. Position arrow boards or variable message boards in work areas. Set up traffic cones and other traffic safety devices in work areas. Monitor the work zone throughout the shift to ensure items remain in their proper locations. Collect and load traffic control items at the beginning and end of shifts. Install, remove, and reset delineators, signs, posts, and supports. Perform shop work, including general maintenance and repair of equipment. Follow all safety rules and regulations to ensure a safe work environment. Adhere to all Company Policies and Procedures. Perform other work-related duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer Growth Potential
Qualifications: Valid Driver’s License. 1-3 years of experience and 2,000 in field hours in traffic control. Must be able to pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Basic reading and writing ability to comply with road signs, complete paperwork, and knowledge of federal and state motor carrier safety regulations. Must be able to read plans and ensure traffic control plans are implemented and maintained. Good knowledge of state and local roadways and experience operating delivery vehicles of varying sizes. Ability to lift and move up to 70 pounds. Must successfully complete the ATSSA TCT intermediate training course. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule. Mechanical background/experience (preferred).
We are an Equal Employment Opportunity Employer. All qualified applicants will be considered without regard to race, color, religion, gender, national origin, disability, or veteran status.

Pay Rate: $15.50/hr - $24.75/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Compensation Details:$20.00-$35.00 Per Hour + Incentive BonusJob Description:Who we areAll Phase Electric is now an Ace Hardware Company. At Ace Hardware Home Services, we are backed by a brand that customers have trusted for over 100 years. You can trust that you can build a career you will be proud of. A career with excellent income, a consistent work schedule and opportunities for advancements. Your essential contributions will be appreciated, respected, and rewarded. Here you won’t just “have a job,” you will be helping us to reshape the future of home services by providing reliable, best-in-class service to your neighbors in your community.What You’ll Do:Assist lead technician with daily installations and repairs of electrical systems.Work closely with the lead technician to ensure that work is completed and job site is clean.Organizes work by receiving and studying work orders; gathering tools and supplies.Repairs electrical problems by replacing faulty parts and components.Maintains safe work environment by following standards and procedures; complying with codes.Updates job knowledge by participating in educational opportunities; reading technical publications.Tests electrical systems to ensure proper installation and operation.Inspects electrical systems to determine whether repairs are needed.Replaces conduit and wiring as needed.Accomplishes maintenance and organization mission by completing related results as needed.Complete special projects and perform other related duties as assigned.What you need to succeed:Prior experience in residential generator installation and maintenance preferredElectrical license preferred Knowledge of multiple manufactures of equipmentCommunication SkillsAble to work independently or with a teamNEC TrainingOSHA 10Ability to TroubleshootAbility to Problem SolveAbility to complete equipment maintenanceAble to pass a drug screening and background check (random testing may occur)Valid Driver’s License and Clean MVR.High standards for your work. Excellence & integrity matter to you.You are able to be a true team player with a positive attitude at all timesPhysical Requirements:Must be able to see color to discern color-coded wiring.Prolonged periods standing, kneeling, bending, and climbing ladders or scaffolding.Must be physically capable of pulling wires and cables through conduits.Must be able to lift up to 50 pounds at a timeWhy should you join our team We live our values - W.E.L.I.G.H.T (Winning, Excellence, Love, Integrity, Gratitude, Humility, and Teamwork). Gratitude. Humility. Love. You don’t often see values like these in most corporate statements, but Ace is different. These things are important to us. They represent our commitment to the company, our employees, and to the Ace brand.In addition to providing our employees a great culture, we offer competitive benefits* that address life’s necessities and perks, many of which expand and improve year after year, including:Incentive/Commission/Bonus opportunities (Based on role / grade level)401(k) retirement savings plan with matching company contributions, eligible on your first day!Comprehensive health coverage (medical, dental, vision, company paid short-term disability, and long-term disability) and life insurance benefits for you and your dependents.Warehouse Merchandise Discount!Paid time off & paid holidays (depending on role and month of hire)Career Growth & opportunities within several channels (Plumbing, Heating, Cooling, Electrical, Customer Service and others). Your career at Ace is more than just a job. It’s a chance to be part of something meaningful. We help locally-owned businesses thrive and make an impact in their communities.Ace invests in every employee we hire, with a key focus on development and coaching. We offer classes, facilitator-led courses, plus a performance management approach that goes beyond the typical annual review.Robust Employee Assistance Program, which will provide professional assistance for personal, legal, financial, work, childcare and elder care support.* Benefits are provided in compliance with applicable plans and policies.Want to be notified when new jobs are posted Follow the link below to create an account and set up custom job alerts:Create Job AlertAbout Ace Hardware Home ServicesAce Hardware Home Services is the most trusted provider of home preservation services backed by Ace Hardware and offering a wide range of residential maintenance and home repair services including plumbing, heating, cooling, electrical, handyman and painting.Ace Hardware has been serving neighbors throughout America for nearly 100 years. Ace recognized the need for a trusted service provider for home repairs and launched Ace Hardware Home Services (AHHS). AHHS is now Bringing Helpful to Your Home and it is our mission to deliver the same level of Helpful service, convenience & quality that you have come to expect from Ace Hardware.Equal Opportunity EmployerAce Hardware Home Services is committed to a policy of promoting equal employment opportunities. The company recognizes the importance of diversity and leveraging the skills and talents of all people to the mutual advantage of each individual and the organization. The company is committed to the prevention of employment discrimination related to race, religion, color, sex (including sexual harassment), gender identity, national origin, age, marital status, disability and military or veteran status, sexual orientation or any other action covered by federal or applicable state/local laws.DisclaimerThe pay range for this position starts as listed in the job posting, but could be higher based on education and experience. Please note, compensation decisions are dependent on the facts and circumstances of each opening. We take into consideration the minimum requirements outlined in the job description, such as an individual’s education, training and experience, the position’s work location, required travel (if any), and external market conditions when determining the final salary for potential new hires. Be aware that salary estimates published via alternate online job boards may not be a true representation of the actual pay range offered for this position. Please refer to the Ace Hardware Home Services position description for the accurate starting pay range information and feel free to discuss this with a Talent Acquisition professional if you are chosen to move forward with an interview. This written “Position Description” is not intended to cover all aspects of the position listed. It is meant to cover the basic/general essential job functions of a particular position. Ace Hardware Home Services reserves the right to change job duties, including essential job functions, according to business necessity.It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Our Team is Kind of a Big Deal!UniFirst is seeking areliable and hardworking Maintenance Tech II to join our UniFirst community! As a Team Partner in the Maintenance Department, you will handle repairs, maintenance, installation and troubleshooting of industrial equipment, systems, and components. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime!We have an immediate opening and provide on the job training. What’s in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth:You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth.Culture: Our culture is what makes UniFirst an organization that stands out from the rest.Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we believe it takes many kinds of people to make us successful.What you’ll be doing: Troubleshoot sources of equipment problems through observation and use of precision measuring and testing instruments. Assist other maintenance personnel with emergency and non-emergency repairs.Troubleshoot and repair Programmable Logic Controllers (PLC’s) and associated control systems. Follow blueprints, schematics, operation manuals, manufacturer’s instructions, and engineering specifications. Perform boiler chemical and wastewater pre-treatment system testing, record results in logbooks / computer systems and make necessary chemical adjustments as required. Perform daily and weekly safety checks on boilers and make necessary repairs as required. Inspect motor, belts, fluid levels, replace filters and perform other maintenance actions in accordance with maintenance procedures. Performing basic welding activities to effect repairs on facilities and equipment.Inspect, clean and lubricate shafts, bearings gears and other equipment parts in accordance with work procedures and technical manual. Utilize a Computerized Maintenance Management System.Perform other duties as assigned by leadership. QualificationsWhat we’re looking for: High school and/or GED is preferred.Two-year technical degree in an appropriate background is preferred. Must be at least 21 years of age.Knowledgeable in industrial maintenance of facilities and equipment.Minimum of 1 year of work experience repairing industrial processing equipment in a production environment required. Applicable military experience will be considered. Must pass UniFirst’s maintenance knowledge assessment to be eligible for employment.Ability to read blueprints and schematics is required.Ability to read and understand maintenance literature printed in English required. Basic computer and Microsoft Office skills is required. Lockout / Tagout experience is requiredAbility to work overtime as needed is required.Valid driver’s license and a safe driving record are required.Ability to lift up to 80 lbs. About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 1.5-billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 13,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team. There’s a lot to love about UniFirst, where you come first. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws

We are looking for a Tire and Lube Technician with a passion to service vehicles. If this is, you and you’re ready for your next destination then you have cruised to the right spot! Wages: $16.75 per hour Apply today and shift your career into drive for tomorrow! Not only do you get to be part of an organization where you Drive your Potential and Power your Passion you get major perks and discounts! Just to name a few Hertz perks: Up to 40% off the base rate of any standard Hertz rental Take advantage of Hertz negotiated discounts (Travel,Tickets- movies, concerts, theme parks, Electronics, Food, Fitness)Credit Union Access Health & Wellness benefits Tuition Reimbursement Pet Insurance Paid Parental Leave Career Growth with hands on learning Educational Background: High School Diploma or equivalent preferred Professional Experience: Entry level position with no required experiencePreferred prior experience with automotive repair (personal or professional) Knowledge: Must be able to perform vehicle repairs with oversightAbility to use shop equipment such as lifts, tire changing equipment, alignment machines, and scan tools Additional Notes: Must have tools to perform necessary repairsMinimum tools needed for the job.3/8” and ½” impact wrenchSockets wrench - metric and standard - preferably long and short lengths.Oil Filter wrenches and toolsTPMS tool - reset tire sensorsCombo wrenchesScrewdriversMust have a Valid Driver’s LicenseThe Hertz Corporation operates the Hertz, Dollar Car Rental, Thrifty Car Rental brands in approximately 9,700 corporate and franchisee locations throughout North America, Europe, The Caribbean, Latin America, Africa, the Middle East, Asia, Australia and New Zealand. The Hertz Corporation is one of the largest worldwide airport general use vehicle rental companies, and the Hertz brand is one of the most recognized in the world. US EEO STATEMENT At Hertz, we champion and celebrate a culture of diversity and inclusion. We take affirmative steps to promote employment and advancement opportunities. The endless variety of perspectives, experiences, skills and talents that our employees invest in their work every day represent a significant part of our culture – and our success and reputation as a company. Individuals are encouraged to apply for positions because of the characteristics that make them unique. EOE, including disability/veteran

Compensation Type: Hourly Highgate Hotels: Highgate is a premier real estate investment and hospitality management company widely recognized as an innovator in the industry. Highgate is the dominant player in U.S. gateway markets including New York, Boston, Miami, San Francisco and Honolulu, with a rapidly expanding presence in Europe, Latin America, and the Caribbean. Highgate’s portfolio of global properties represents an aggregate asset value exceeding $20B and generates over $5B in cumulative revenues. The company provides expert guidance through all stages of the hospitality property cycle, from planning and development through recapitalization or disposition. Highgate also has the creativity and bandwidth to develop bespoke hotel brands and utilizes industry-leading proprietary revenue management tools that identify and predict evolving market dynamics to drive out performance and maximize asset value. With an executive team consisting of some of the industry’s most experienced hotel management leaders, the company is a trusted partner for top ownership groups and major hotel brands. Highgate maintains corporate offices in London, New York, Dallas, and Seattle. Location: Courtyard Montgomeryville544 Dekalb PikeNorth Wales, PA 19454

Haven Behavioral Hospital of Philadelphia is seeking caring and compassionate people to join our team of devoted healthcare professionals.Why Haven of Philadelphia Haven Behavioral Hospital of Philadelphia provides inpatient psychiatric stabilization and treatment to adults and older adults experiencing acute symptoms of depression, anxiety, mood swings or psychosis. Services are provided by psychiatrists, nurses, therapists and other professional staff who are dedicated to improving the quality of life of our patients.We are currently looking for a PRN Maintenance Technician: POSITION SUMMARY :• Provide preventative maintenance functions. • Repairs involving plumbing components/systems, electrical, drywall and painting, HVAC systems, furnishings, and equipment.• Familiarity with codes and regulations related to healthcare and healthcare facilities including OSHA, TJC, and PA state regulations. EXPERIENCE : • Skills and employment experience in the following areas: drywall repairs and/or installation, painting, plumbing repairs, minor electrical maintenance/repair, landscaping maintenance, HVAC maintenance and repairs, appliance, furnishings and basic equipment maintenance & repairs.• Requires excellent communication, presentation, and interpersonal skills.Qualifications EDUCATION : • High School DiplomaIn accordance with the emergency regulation issued by the City of Philadelphia requiring hospital workers to be fully vaccinated, all employees and contractors of Haven Behavioral Hospital of Philadelphia are required to be fully vaccinated with the COVID-19 vaccine.Haven Behavioral Health is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, gender, gender identity, sexual orientation, national origin, genetic information, and veteran or disability status. EDUCATION : • High School DiplomaIn accordance with the emergency regulation issued by the City of Philadelphia requiring hospital workers to be fully vaccinated, all employees and contractors of Haven Behavioral Hospital of Philadelphia are required to be fully vaccinated with the COVID-19 vaccine.Haven Behavioral Health is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, age, religion, gender, gender identity, sexual orientation, national origin, genetic information, and veteran or disability status.

Join us as an Industrial Maintenance Mechanicin our Blue Anchor, NJ plant. You'll collaborate with our team to keep our plant running smoothly, and continuously improve our machinery and maintenance department! The shift for this position is 7 pm to 7 am with a starting rate of $30.34. New Jersey State Refrigeration/Boiler Licenses will be paid an additional per hour as follows: Black/Blue $1.50; Black/Blue/Red $3.00; Black/Blue/Red/Gold $4.50. New hires have one year from their hire date to obtain license from the State of NJ Department of Labor and Workforce Development.The Industrial Maintenance Mechanic will be performing routine maintenance and repairs on industrial machinery and equipment. At Kellanova, we encourage collaboration with other team members to keep production lines running smoothly. In this role you will acquire proficiency in specialized equipment and automation systems, all while having the chance to pursue certifications or additional training to further enhance your skills.A Taste of What You’ll Be Doing Conducting Preventative Maintenance – Perform basic troubleshooting, repairs and preventative maintenance on mechanical and electrical equipment – your excellence will be the key to keeping production moving smoothly.Ensuring Performance Efficiency – Manage machine performance by doing equipment set-up and change-overs. You’ll facilitate production and quickly respond to equipment breakdowns.Following Best Practices – Understand, follow and enforce all established guidelines. Your attention to detail will ensure compliance with all safety, health, quality and company policies, procedures and recognized practices. You’ll help us keep delivering success, one waffle at a time.We’re Looking for Someone WithHigh school diploma or GED.Effective communication, interpersonal and organizational skills.Ability to sit, stand, walk, lift up to 50 lbs and complete repetitive tasks throughout the day.Experience with troubleshooting, repairs, and preventative maintenance on mechanical and electrical equipmentin a manufacturing setting.What’s NextApplications for this position will be accepted through May 6, 2025. After you apply, your application will be reviewed by a real recruiter, so it may take us a few weeks to get back with you by email or phone. Visit our How We Hire page to get insights into our hiring process and more about what we offer.All applicants must have permanent legal authorization to work in the United States. Kellanova does not sponsor employment visas for this role.Need assistance throughout the application or hiring process Email .Benefits offerings vary by site but are competitive and generally include medical, dental, vision, life, accidental death & dismemberment insurance, along with an employee assistance program. Kellanova offers paid time off, paid holidays, and other leaves to promote work/life balance.Where applicable, we offer income protection benefits such as supplemental life insurance and the ability to participate in a retirement plan. Part-time employees may have access to some of these benefits on a pro-rated basis.Get to Know UsAt Kellanova, we are driven by our vision to be the world’s best-performing snacks-led powerhouse, unleashing the full potential of our differentiated brands and our passionate people. Our portfolio of iconic, world-class brands include Pringles, Cheez-It, Pop-Tarts, MorningStar Farms, Special K, Krave, Zucaritas, Tresor, Crunchy Nut, among others.Kellanova’s Culture of Best means we bring our best to all that we do in pursuit of our vision to be the world’s best performing snacks-led powerhouse. Our culture celebrates boldness and empowers our people to challenge the status quo, achieve results, and win together.Our focus on Equity, Diversity, and Inclusion (ED&I) enables us to build a culture of belonging where all employees have a place at the table and are inspired to share their passion, talents and ideas to work.Mars has agreed to acquire Kellanova in a combination that will shape the future of snacking! The transaction is anticipated to close within the first half of 2025 (subject to Kellanova shareowner approval and other customary closing conditions, including regulatory approvals). The companies remain separate until closing. You can learn more at www.futureofsnacking.com, and our hiring teams will be happy to discuss further questions if your application advances in the hiring process.The best brands. The best people. The best you.Kellanova is an Equal Opportunity Employer that strives to provide an inclusive work environment, a seat for everyone at the table, and embraces the diverse talent of its people. All qualified applicants will receive consideration for employment without regard to race, color, ethnicity, disability, religion, national origin, gender, gender identity, gender expression, marital status, sexual orientation, age, protected veteran status, or any other characteristic protected by law. For more information regarding our efforts to advance Equity, Diversity & Inclusion, please visit our website here.

Move forward with us! At NJ TRANSIT, you'll join us in transforming the third-largest transportation agency in North America. We are committed to delivering safe, reliable service that gets customers to their destinations on time–and we're looking to hire talented folks with a commitment to excellence to make it all possible. Summary: Mechanic B-Electrical Shop Electricians conduct general and specialized installation, maintenance, and repair on various types of electrical equipment. Roles and Responsibilities: Must present one of the following: New Jersey Electrical License, Certificate of Completion of Apprenticeship Electrician from the NJ Department of Labor Office of ApprenticeshipORfive (5) years of electrical experience in commercial, industrial and/or residential environments.Ability to read and interpret technical documents, wiring diagrams, schematics, construction drawings, etc.Experience with troubleshooting and repairing electrical systems.Must pass New Jersey Transit’s Electrician Aptitude Test.Present a valid driver’s license andHigh School Diploma or GED.Successfully pass the pre-screening process including drug test, physical, and criminal, employer, and driving background checks. Education, Experience, and Qualifications: Installing low or medium voltage equipment, panels, motors, controls, etc.Installation, maintenance, and repair of electronic systems, PLC’s, Controllers, Computers, Alarms, PA’s, etc.Test equipment such as multi-meters, insulation testing, phasing, etc.Using and understanding code requirements, including NEC, NESC, OSHA, IEEE, NFPA, etc.Prior railroad, transportation, or military experience. Physical Requirements Stoop, bend, crawl, balance, climb, kneel.Be exposed to equipment that intensifies the heat factor on an occasional basis.Wear protective equipment such as hardhat, safety glasses, and safety-toe boots.Work Locations:Redbank, Hoboken, and Raritan, NJ.This is a Unionized position. Rate of pay: The pay rates are tiered and are non-negotiable based on years and types of experience.Tiers start at $29.11 (80% of the full rate), $32.75 (90% of full rate), $36.39 (100%). At NJ Transit, you will enjoy a competitive salary and excellent benefits package: Comprehensive Family Health Insurance – Medical, Prescription, Dental, VisionFlexible Spending AccountLife InsurancePaid LeaveTuition AssistancePre-Tax Commuter BenefitsPlanRetirement Plans 401(a) - Retirement plan with a 6% employer contribution401(k) - Retirement saving plan with up to an 3% company match457(b) - Deferred Savings Plan At NJ TRANSIT, diversity and inclusivity are vital to our success as are committed to hiring individuals from diverse backgrounds, experiences, abilities, and veteran status. As an Equal Opportunity Employer, we encourage all qualified applicants to apply and join our team. Learn more about NJ TRANSIT! Sign up to receive an invitation to our next live information session at WWW.NJTRANSIT.COM/BEST This position is deemed safety sensitive per the Department of Transportation (DOT) Drug and Alcohol Testing Regulations. The DOT Drug and Alcohol Testing Regulation 49 CFR Part 40 does not authorizethe use of marijuana for any reason. It is unacceptable for any safety-sensitive employee subject to drug testing under DOT regulations to use recreational or medical marijuana. The prohibitionincludes any derivative of marijuana such as CBD oils, teas, etc. The use of recreational and medical marijuana is a violation of NJ TRANSIT’s Drug and Alcohol-Free Workplace Policy for safety-sensitive employees. www.njtransit.com INDRA1

Clean Harborsis seeking aTravelingField Inspector.TheField Inspectoroversees and documents daily site activities for remediation and emergency response projects. In addition, Field Inspector will be required to collect soil and groundwater samples, air monitoring data and completion of field activities. Field Inspector will work under the direct supervision of the Field Project Manager/Field Supervisor and will assist in the completion of a project. ***An exciting way to build a career with Clean Harbors using this role as a steppingstone to work through the chain of the Remediation team and ultimately into a Project Manager position while gaining the necessary skills and experience to do so. Travel 95-100% required:This position will travel 6 weeks on the road and 1-week home paid. Location: Philadelphia, PA or Chicago, IL preferred Pay:$25 an HR, OT and per diem available **Per Diem available daily, travel costs covered by the company. Why work for Clean Harbors Health and Safety is our #1 priority and we live it 3-6-5;Competitive wages;Comprehensive health benefits coverage after 30 days of full-time employment;Group 401K with company matching component;Opportunities for growth and development for all the stages of your career;Generous paid time off, company paid training and tuition reimbursement;Positive and safe work environments.Key Responsibilities:Ensuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times;Accurately and completely document site activities including cost tracking, worksheets, waste shipping logs, manifest management, health and safety, documentation of meetings and conference calls and other paperwork via laptop or mobile device;Work in field with hands on labor alongside crew and Project Manager/Field Service Supervisor;Travel to different project locations including Wastewater Treatment plants, soil remediation locations, and more;Reading and understanding of project documents and contracts;Will gain 40-hour Hazwoper, OSHA 10 and possibly more certifications through the company;Learn to calibrate air monitoring meters and associated Health & Safety equipment;Work on project financial tracking and assist in various project administrative functions, including generation of required reports, etc.;Ordering and receiving supplies for projects;Possibly operate some heavy equipment.What does it take to work for Clean Harbors High School Diploma or equivalent is required;Bachelor’s degree in Environmental Science or Engineering required;Be safety orientated and have a commitment to safety;Willing to do manual labor;Willing to work outside in all kinds of weather, utilizing prescribed Personal Protective Equipment;Valid DL and clean MVR required;Should have working knowledge of Microsoft Office software and professional level written / oral communication skills. Civil Engineering / construction / survey experience a plus.40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us.Join our safety focused team today. To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/.Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class.Clean Harbors is a Military & Veteran friendly company.*CH#LI-SE1

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Job DescriptionWe are currently seeking aMaintenance Mechanicfor our manufacturing/bottling facility to maintain, fix, and improve equipment used in bottling and packaging operations.Factory Location: Jersey City, NJCompensation: $38.58 / hourSign on Bonus of $3500 after 90 days of employmentShift differential: 6%-8% of base hourly rate paid for applicable hours workedSchedule:4:00 PM - 1:00 AM, Night Shift, Monday - Friday, Full-Time Ability to work holidays and weekends per business needs Must be able to attend training on day shift for approximately three weeks.Benefits:Medical, prescription, dental, vision, life and disability insurance, 401(k) with match, company discounts, paid vacation, and much more! Employees are eligible for benefit election on day 1 of employmentSkills Required:Perform routine preventative and corrective maintenance and testing on equipment Perform maintenance tasks to include repairing and improving, from minor rebuilds to major overhauls on all equipment Identify processing waste reduction opportunities and assist in reduction projects Participate in preventative maintenance program to help reduce costs of operations through PM optimization Dismantle, clean, repair and test electrical, electronic and mechanical components to determine component-level failure Communicate, coach, and train employees to continuously improve team’s ability to prevent loss of production and respond safely to equipment failures Maintain preventative maintenance logs and accurate records of all testing and repairs Recommend equipment to be included in preventive maintenance programs Perform preventative maintenance tasks to identify all potential mechanical and electrical issues with equipment throughout the plant Rebuild worn-out, but reusable, pieces of equipment, such as gearboxes for scheduled PM’s Troubleshoot, investigate, and repair all mechanical, electrical, and pneumatic machine systems Eliminate machine failures from recurring by utilizing the Breakdown Analysis process Communicate directly with equipment suppliers, contractors, and vendors as necessary Focus areas will include but are not limited to Production support, Mechanical Room, Water Processing, Boiler Room, and Wastewater Treatment Water Chemical Treatment ProgramQualificationsHigh School Diploma, GED, or equivalent work experience; additional technical training or certifications desired Three or more years proven maintenance experience in a manufacturing environment Candidates must complete the Mechanical Aptitude Test before being considered Prior experience with high-and low-pressure compressors, chillers, water treatment, boilers is preferred Strong technical knowledge of compressed air systems (pneumatics), electrical systems, hydraulics and water processing is preferred Knowledge of bottling equipment, PM programs and SAP system preferred Must have electrical knowledge of single and three phase power including the ability to diagnose and replace electric motors Must be able to work and accomplish projects with little to zero supervision Must be able to foster and build a team-work environment Communicate effectively with operators, technicians, mechanics, and supervisors Able to read, interpret, and analyze computer generated reports and accurately complete all tasks Must be able to do physical inspections of equipment that will require climbing, reaching, and extending arms overhead Able to lift and pull 50 lbs. as needed while performing work Must be proficient reading mechanical drawings / schematics and OEM technical prints Proficient computer skills, including the use of Microsoft Office applications Available for call-ins or to cover all shifts to support production teams as required Work together with Safety department to achieve a zero-injury workplace Must display a positive mental attitude and be open to a fast paced ever changing work environmentPrimo Brands’ established portfolio includes billion-dollar brands Poland Spring® and Pure Life®, premium brands like Saratoga® and Mountain Valley®, regional leaders such as Arrowhead®, Deer Park®, Ice Mountain® Ozarka®, and Zephyrhills®, purified brands, Primo Water® and Sparkletts®, and flavored and enhanced brands like Splash® and AC+ION®. Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come.Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. If you need any assistance or accommodations due to a disability, please contact us at

Overview: With over 150 years of experience,and headquartered in Southern CA, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes energy solutions, HVAC & refrigeration installations, remodels, service & maintenance; including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets.The Project Estimator for CoolSys Energy Solutions (CES) is responsible for generating accurate customer/project quotes based off specific details associated with each scope of work and reflecting all labor/material costs, customer specifications, published plans, and company guidelines in consultation with business leaders.-HVAC, Plumbing, Refrigeration and Energy Solutions-On-site*WHY JOIN USWe understand that hiring great people is the foundation of everything we do. Our employee benefits packages include:Competitive pay $70 - $85KMedical, Dental, Vision and Prescription coveragePaid vacation and holidays401(K)matchLife insurance, AD&D and long-term disabilityTuition reimbursementOpportunities availablenationwideEmployee discountson vehicles, hotels, theme parks, select cell phone bills and so much morePet InsuranceLegal Plan, and ID Theft Protection Responsibilities: Energy Solutions Project/BusinessResponsibilities:Receives Invitations to Bid from customers and initiates Requests for Proposal/bid process (RFPs) including downloading documents, auditing available documents against established checklists, and disseminating information to appropriate Estimators.Updates Client Relations Management software (CRM) with all key customer information, bid details, and contact info.Interprets scale drawings, construction specifications, textual scope of work descriptions for customer requirements as well as architectural & structural as affecting the mechanical scopes of work. Surveys material quantities against needs reasonably inferred on the construction documents & specifications.Identifies requirements for subcontractors and/or vendors on the project and solicits those parties' participation.Gathers and assembles all data for the cost estimate using established processes & procedures ensuring an accurate valuation of expected costs. Applies established labor metrics and adjusts for anticipated field conditions derived from the interpretation of project documentation and/or pre-estimating surveys (performed by others).Prepares quotes for Sales/Ops review, including a thorough analysis of customer needs and specifications, accurate valuation of expected materials, equipment, labor, and any subcontractor/vendor costs.All other duties as assigned.People Responsibilities:Communicates items of work identified and included in the cost estimate to the Sales team and executive management as required. Drafts and provides concise scope of work documents to Sales for accurateand effective communication of the offered goods & services to the client.Coordinates with vendors & subcontractors to ensure their scope of work proposals are accurate to the project requirements and consistent among multiple offerors of the same goods & services. Qualifications: JOB REQUIREMENTSProject/Business Management:Education and/or experience equivalent to a High School diploma and 5+ years of experience in Specialty-trades role, such as Construction Estimation, Jobsite Coordination, Project Management, etc. Mechanical construction experience in a specialty trade (HVAC, Refrigeration, Energy Management/Controls) equivalent to a Journeyman (4+ years) field is a plus.Familiar with both basic and advanced mechanical system design practices.Able to manage multiple assignments, setting and balancing competing priorities with strong organizational skills and multi-tasking capability.Able to solve problems, apply good judgement and make decisions that have significant impact on the team’s credibility, operations, and service.Able to effectively use typical business tools including E-Mail, Word, Excel, Enterprise Resource Planning (ERP) software, etc.Familiar with automated, on-screen takeoff, estimating software, or drafting software, (i.e.PlanSwift, Quickpen, QuoteSoft, FastEst, AutoCAD, Revit)Ability to understand and follow all company policies and procedures and all applicable State and Federal laws.Ability to use typical business tools including E-Mail, Word, Excel, etc.People Management:Excellent verbal, nonverbal and written communication and presentation skills.Strong customer service skills, including an ability to proactively address customer issues and concerns and ability to forge strong working relationships with customers and coworkers.Able to understand opposing points of view on highly complex issues and to negotiate and integrate different viewpoints. Join Us: The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.Work EnvironmentThis job operates in a clean, well-lit and climate controlled professional office environment with minimal physical hazards and noise. This role routinely uses standard office equipment such as computers, phones, printers, etc.Physical DemandsWhile performing the duties of this job, the employee is regularly required to stand, sit, walk, talk, hear, drive, and use hands and fingers. The employee is occasionally required to reach, stoop and kneel. The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookand Twitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Line of Business: Cement & WhiteAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingInstall, maintain, and repair electrical systems and equipment.Troubleshoot and diagnose electrical issues efficiently.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, sensors. Troubleshoot equipment including VFD, multilin. Rewires motors.Collaborate with team members to complete projects on time.Maintain accurate records of work performed.What Are We Looking ForIndustrial Electrician experience required; 5 years overall electricianexperience required.Certification as an Industrial Electrician; or equivalent combination of education and training required.Abilityto apply concepts of basic algebra and geometry in practical situations.System knowledge of HMI and PLC control systems. Rockwell/Allen Bradley experience preferredEffective communication and teamwork abilities.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, elevated noise level and working extended hours as needed.What We Offer$36.00 to $42.00 per hour.Company benefits for Medical, Dental, Vision, Disability and more.Union paid PTO, and holidays. 401K match.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: OtherAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine and preventive maintenance on mobile equipment.Diagnose and repair mechanical, electrical, and hydraulic issues.Maintain accurate records of all maintenance and repair work.Ensure compliance with safety regulations and company policies.Collaborate with team members to improve equipment performance.Order parts, tools and equipment for necessary repairsPerform DOT inspections on tri-axles and trailersWhat Are We Looking ForStrong mechanical aptitude and problem-solving skills.Proficiency in diagnosing and repairing mobile equipment.Ability to read and interpret technical manuals and schematics.Effective communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must possess a valid driver's license, CDL and maintain a clean driving record.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$35-40 per hour, 401(k) retirement savings plan with an automatic company contribution as well as matching contributions, highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine maintenance and repairs on plant equipment.Diagnose mechanical issues and implement effective solutions.Ensure compliance with safety standards and regulations.Collaborate with team members to optimize plant operations.Maintain accurate records of maintenance activities.What Are We Looking ForStrong mechanical aptitude and problem-solving skills.Ability to work independently and as part of a team.Proficiency in using maintenance tools and equipment.Commitment to safety and quality standards.Effective communication and organizational skills.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$27 - $28 per hour401(k) retirement savings plan with an automatic company contribution as well as matching contributionsHighly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Looking for a place where you can thrive SavATree's mission is to take our passion for nature and keep this country's outdoors beautiful and flourishing. Through our comprehensive tree, shrub, and lawn care we work hard to make sure our discerning customers have attractive, healthy and cared-for green spaces to enjoy. Over the last thirty years, we have opened new offices across the country, and we are looking for people who want to grow with us. In this role Crew Lead, Tree Climber, team members have the opportunity to work outside and visit beautiful properties in their community. The Tree Care team applies expertise in climbing, pruning, and safety to ensure the health and well-being of each client's landscape. The Crew Lead position is an additional level of specialty for select individuals who have demonstrated leadership qualities and received approval from the local branch management to provide direction in a work crew setting. Specific knowledge includes: TCIA Crew Leader Training Program, Crew Safety, Personal Safety, Hazard of Inexperience, and ability to check off levels equal and below. This position pays up to $35 per hour depending on years of experience + paid PTO + paid benefits and 401K! What a day is like: Daily focus is working together on a General Tree Care crew to provide high quality tree care to our clients. The Tree Care Team is involved in all aspects of pruning, removals, cable bracing and other concepts related to tree care. Team members are able to safely operate all equipment and perform the assigned job tasks while also providing excellent service to our clients. What kind of person are we looking for Someone with: Experience with proper pruning practices including large shade trees and ornamentalsAbility to identify native and introduced tree and shrub species and have a working knowledge of each species' characteristicsAbility to climb without spursExperience with tree care safety standardsPractical knowledge of chainsaw and equipment operationExperience with aerial lifts (bucket truck)Demonstrate additional competencies in all areas of knowledge for designated skill level.Communicate advanced understanding of all safety policies and procedures, including hazard tree identification.Utilize specialized equipment properly for climbing (ropes, saddle, ladders) along with all associated tools.Apply knowledge of branch collars and proper pruning cuts with total competence on chainsaw operations in small to medium difficulty (40-50') trees.Employ ANSI A300 Pruning Standards and Terminology and ANSI Z safety.Demonstrate knowledge of different tree species and different techniques necessary for climbing each tree including Oaks, Maples, Dogwoods, Apples (Crab vs. Regular), Hemlocks, Pines and Spruce.Complete work exhibiting ability to raise a ladder, throw a rope, and safe techniques to climb into a tree.Set up safely with proper placement of lowering lines in a strong enough crotch, know when to attach a tag line, and engage proper lowering techniques.Know when to double crotch and use other appropriate techniques when working in trees.Able to drop trees, know when to use ropes for take down and identify potential need to use spikes.Perform aerial rescue if needed. What is Essential: The desire to work outdoors Valid U.S. driver's license to operate company vehicles, CDL a plusMust be authorized to work lawfully in the U.S. Physical demands of this role:These physical demands described must be met by an employee to successfully perform the essential functions of this job. While performing the duties of the job, the employee is subject to frequently lift and/or move up to fifty (50) pounds. Why you might love working here: We have lots of training and development opportunities and support continuing education in the industryOur Tree Care Team works alongside some of the best trained and equipped teams in the industry, with an emphasis on quality and safetyWe offer competitive compensation and benefits, including health and dental, paid time off, 401(K) Savings Plan, Flexible Spending Plan, Equipment Account We want everyone to be able to identify and achieve their own version of success, which means giving each team member the room and opportunity to grow. To ensure that everyone has the best chance to succeed, we invest heavily in training and continuing education. We make it easy for team members to reach out and get the help needed, even when it's from the other side of the country. We pride ourselves on creating an environment where each team member has the resources and opportunities to advance his or her career and become a go-to subject matter expert. That's why we often say that when you work here, you thrive here. SavATree is an equal opportunity employer and a Drug Free Workplace

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible formaintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel, gasoline, and alternative technologies such as compressed natural gas, liquefied natural gas, propane, hybrid, and electrical in some locations.Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls.Automotive Technicians must be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Automotive Technicians?must possess the required hand tools required to perform the applicable job assignment. ?Responsibilities and DutiesMeets D.O.T requirements required by job assignmentBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required,?throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsRequirementsMust have an active driver’s license issued by the stateMust be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Must possess the required hand toolsrequired to perform the applicable job assignment. ?Vermont Safe Inspection Certified.Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsClass A/Bor A Commercial Driver's License (CDL) - PreferredDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $39.25 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

If you're looking for the benefits of joining an industry leader, with a high-charged, energy-filled environment, then you can stop looking, because you have found what you're looking for in the Automotive Technician position at our Hertz Rent-A-Car location. Bring your energy, drive, and motivation to Hertz, and set your goals on cruise control! The Hertz Corporation, a world leader in the car rental industry, currently seeks energetic team players to join our team. Wages: $23.00 per hour The Automotive Technician is the second level within the Hertz Corporation for our maintenance team. In this role you will be performing preventative maintenance, minor repairs, and inspection. Educational Background: High School Diploma or equivalent preferred Professional Experience: At minimum one (1) years of vehicle maintenance experiencePreferred prior experience with automotive repair (personal or professional) Knowledge: Must be able to perform vehicle repairs with oversightAbility to use shop equipment such as lifts, tire changing equipment, alignment machines, and scan tools Additional Notes: Must have tools to perform necessary repairsMust have a Valid Driver’s LicenseThe Hertz Corporation operates the Hertz, Dollar Car Rental, Thrifty Car Rental brands in approximately 9,700 corporate and franchisee locations throughout North America, Europe, The Caribbean, Latin America, Africa, the Middle East, Asia, Australia and New Zealand. The Hertz Corporation is one of the largest worldwide airport general use vehicle rental companies, and the Hertz brand is one of the most recognized in the world. US EEO STATEMENT At Hertz, we champion and celebrate a culture of diversity and inclusion. We take affirmative steps to promote employment and advancement opportunities. The endless variety of perspectives, experiences, skills and talents that our employees invest in their work every day represent a significant part of our culture – and our success and reputation as a company. Individuals are encouraged to apply for positions because of the characteristics that make them unique. EOE, including disability/veteran

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Fleet Mechanic to join our UniFirst community. As a Team Partner in the Maintenance Department, you will be responsible for carrying out all corrective, preventative, and predictive maintenance on fleet vehicles to ensure the safe, efficient, and reliable operation. In addition, you will be responsible for maintaining fleet vehicles in a safe working condition meeting DOT or other regulatory requirements. At UniFirst we have a standard Monday - Friday work week with periodic and weekend overtime. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What’s in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you’ll be doing: Verify all vehicles and drivers are properly licensed.Ensure all preventative maintenance is performed when due.Verify that the appearance of fleet vehicles meet UniFirst standards.Sustain a clean, safe, and maintained garage. Purchase parts and monitor quotes for best pricing and quality.Provide back up for a shuttle run when needed.Ensure all corrective, preventative, and predictive maintenance on fleet vehicles is completed and up to date.Maintain fleet vehicles to ensure they are in safe working conditions, meeting DOT or other regulatory requirements.Utilize a Computerized Maintenance Management System.Perform other duties as assigned by leadership. QualificationsWhat we’re looking for: High School Diploma and/or GED equivalent is preferredMust be 21 years of age or older.Associates degree from an accredited technical school and equivalent experience is preferred. Valid driver's license and a safe driving record are required.Must meet DOT requirements.Must be able to perform all vehicle repairs, have diagnostic knowledge with GM drivability, and some diesel experience is highly preferred.Must be willing to work overtime as needed and perform occasional road calls.3 – 5 years of proven medium to heavy-duty vehicle repair including: Preventative Maintenance, tire & wheel, air & hydraulic brakes, drivetrain, computerized diagnostics, suspension, electrical and A/C.Proven computer skills and ability to use diagnostic softwareAbility to lift up to 80lbs. About UniFirstThe fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 2 billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team.

Move forward with us! At NJ TRANSIT, you'll join us in transforming the third-largest transportation agency in North America. We are committed to delivering safe, reliable service that gets our customers to their destinations on timeand we’re looking to hire talented folks with a love of learning to make it all possible Job Title- Superintendent, Contract Oversight Maintenance of Equipment Summary: Reporting to the NJ Transit Director Light Rail Operations and Business Administrator. Manages and monitors the Design, Build, Operate and Maintain (DBOM) activities of the Contractor in all related aspects of that Operation. Responsible for ensuring that the interests of NJ Transit are protected and that the Contractor meets or exceeds requirements of service quality management in providing the customer with clean, safe, and reliable transportation. Roles and Responsibilities Reviews and analyzes the operating policies and procedures of the contractor based upon the accepted “best practices’ of the industry.Reviews Daily Reports to ensure that incidents, unusual occurrences, or accidents are reflected accordingly.Ensures that the Contractor follows “best practices” and contractual requirements in relations with Local, County, State and Federal Governmental entities; liaisons with NJ Transit Governmental Affairs, Corporate Communications, NJTPD, and other NJ Transit departments and divisions as required.Coordinates with the Contractor with the review of plans to ensure the compliance with NJ Transit Engineering Standards, the proper issuance of permits, establishment of Temporary Access Permits, and third-party compliance.Supervises O&M compliance in the areas of Maintenance of Equipment – LRT Rolling Stock: Daily Inspections, Scheduled Inspections, Preventative Maintenance, Overhaul activity.Works with the Contractor in conceptual planning and design for system wide enhancement and improvement in the areas of maintenance to ensure no adverse service impacts to the public are incurred.Monitors the Capital Asset Replacement Program and provides input to Capital Budget Preparation and Variance analysis.Backfills the duties and responsibilities of the NJ TRANSIT Director Light Rail Operations and Business Administrator as needed/directed. May also be deployed to perform same functions at River Line and/or Newark Light Rail as directed/needed This Position Supervises: Vendors and related activities Education, Experience and Qualifications / KNOWLEDGE & SKILLS REQUIRED Bachelor’s Degree in Engineering, Transportation, Industrial Management, or Business Administration or a related fieldand seven (7) years of closely related experience in LIGHT RAIL VEHICLE MAINTENANCE. Must possess progressive experience in managing/supervising all facets of RAILWAYMAINTENANCE OF EQUIPMENT (MOE) programs/systems.Experience in contract management.One year of closely related experience can be substituted for year of education required. Knowledge and Skills: Excellent verbal and written skills with experience in the oversight of and/or the conduct of a performance/operating contract is strongly preferred.Knowledge of local, state, and federal governing policies and regulations as related to the discipline of equipment maintenance in a Light Rail environment is strongly desired. Certificates, Licenses, Registrations Working Environment Office and Field Environment Physical Demands Sitting, standing, walking, climbing, walking on ballast in a storage yard or along the Right of Way, stepping over Rails. Working in a Shop Environment. Other Conditions Year round outside work At NJ Transit, you will enjoy a competitive salary and excellent benefits package: Comprehensive Family Health Insurance – Medical, Prescription, Dental, VisionFlexible Spending AccountLife InsurancePaid LeaveTuition AssistancePre-Tax Commuter BenefitsPlanRetirement Plans401(a) - Retirement plan with a 6% employer contribution401(k) - Retirement saving plan with up to an 3% company match457(b) - Deferred Savings Plan At NJ TRANSIT, diversity and inclusivity are vital to our success as are committed to hiring individuals from diverse backgrounds, experiences, abilities, and veteran status. As an Equal Opportunity Employer, we encourage all qualified applicants to apply and join our team. Learn more about NJ TRANSIT! Sign up to receive an invitation to our next live information session atWWW.NJTRANSIT.COM/BEST

Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingAssist in performing routine and preventive maintenance on plant equipment.Learn to diagnose and repair mechanical issues under supervision.Support team members in enhancing equipment performance.Maintain accurate maintenance records and reports.Follow safety protocols and regulations at all timesWhat Are We Looking ForStrong mechanical aptitude and willingness to learn.Ability to read and interpret technical manuals and blueprints.Proficiency with hand and power tools.Effective communication and teamwork abilities.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$28.54 per hour401(k) retirement savings plan with an automatic company contribution as well as matching contributionsHighly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: Cement & WhiteAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingInstall, maintain, and repair electrical systems and equipment.Troubleshoot and diagnose electrical issues efficiently.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, sensors. Troubleshoot equipment including VFD, multilin. Rewires motors.Collaborate with team members to complete projects on time.Maintain accurate records of work performed.What Are We Looking ForIndustrial Electrician experience required; 5 years overall electricianexperience required.Certification as an Industrial Electrician; or equivalent combination of education and training required.Abilityto apply concepts of basic algebra and geometry in practical situations.System knowledge of HMI and PLC control systems. Rockwell/Allen Bradley experience preferredEffective communication and teamwork abilities.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, elevated noise level and working extended hours as needed.What We Offer$36.00 to $42.00 per hour.Company benefits for Medical, Dental, Vision, Disability and more.Union paid PTO, and holidays. 401K match.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Overview: With over 150 years of experience,and headquartered in Southern CA, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets.WHY JOIN USWe understand that hiring great people is the foundation of everything we do. Our employee benefits packages include:Competitive pay from $93-115K+ depending on experienceMedical, Dental, Vision and Prescription coveragePaid vacation and holidays401(K)matchLife insurance, AD&D and long-term disabilityTuition reimbursementOpportunities availablenationwideEmployee discountson vehicles, hotels, theme parks, select cell phone bills and so much morePet InsuranceLegal Plan, and ID Theft ProtectionTo support our rapid growth, CoolSys Energy Design - Consulting Engineers (CED) is in search of a Senior Plumbing Engineer to join our team! Our ideal candidate will be able to design commercial plumbing and fire protection systems, maintain positive relationships with clients and vendors, and lead a team of staff to ensure timely and quality deliverables. Responsibilities: • Maintain responsible control over all design activities pertaining to the project, including engineering, quality control, and code compliance. • Perform site inspections to determine compliance with construction documents and resolve design issues during the construction phase. • Perform hydraulic calculations and work with outside resources to incorporate special hazard systems. • Document production of small and large projects. • Participate in conceptual design for specific projects. • Create and maintain AutoCAD and Revit drawing packages. • Provide deliverables and products such as calculations, drawings, and specifications related to plumbing. • Comply with project schedules, regulatory requirements, and industry best practices. • Ensure work is executed accurately and in a timely and cost-effective manner. • Ensure that design calculations and engineering drawings are constructible, comply with code, and meet customer quality requirements and company standards. • Manage, assign/prioritize workloads, and provide leadership to junior engineers performing plumbing and fire protection system design. • Assess and anticipate deliverables, prepare budgets and schedules, and communicate resource requirements to senior management. • Represent CoolSys Energy Design in project meetings covering technical issues, including meetings with utilities, owners, contractors, construction subcontractors, and inspectors. Qualifications: • Bachelor of Science degree in Mechanical Engineering. Other engineering or construction disciplines are considered based on experience and skill set. • 10 or more years of relevant professional experience. • Knowledge of Revit and AutoCAD required. • Previous experience managing staff is preferred. • Strong analytical, problem-solving, and decision-making capabilities, as well as demonstrated high-quality technical writing skills. • Team player with sound business ethics and the ability to multi-task in a fast-paced environment. • Ability to achieve project goals and deadlines with minimal supervision. • Willingness to work with all levels of internal staff, as well as outside clients and vendors to develop a full understanding of building energy systems and their operation. • High proficiency in Microsoft Office applications (Word, PowerPoint, Outlook, and Excel). • This position will require minimal travel to project sites. Join Us: Today, there are 27 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookand Twitter.CoolSysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) and drug testing are required for all positions. CoolSys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Line of Business: OtherAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingOverseeing and coordinating maintenance activities to ensure equipment reliability and efficiency for all fixed and mobile assetsLeading and mentoring a team of maintenance technicians.Implementing preventive maintenance programs and schedules on both fixed and mobile equipmentEnsuring compliance with safety regulations and company policies.Managing maintenance budgets and resources effectively.Manage inventory of parts for repairs on mobile and fixed equipment.What Are We Looking ForAt least three (3) years of experience in a heavy industrial setting.Strong leadership and team management skills.Proficiency in maintenance planning and execution.Effective communication and interpersonal skills.Commitment to safety and continuous improvement.Work EnvironmentFast-paced and dynamic work environment.Collaborative team culture.Opportunities for professional growth and development.2nd shift, may require some 3rd shift hours depending on business needs.What We OfferCompetitive base salary and participation in our annual incentive plan.401(k) retirement savings plan with an automatic company contribution as well as matching contributions.Highly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug Benefits.Health Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA).AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance.Paid Bonding Leave, 15 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid Holidays.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Job SummaryUPS is currently hiring Building and Systems Engineering (BaSE) Mechanics. This position is responsible for maintenance activities that are performed to keep a UPS package handling facility operating efficiently and effectively. The work is fast-paced and requires routine interaction with other hub employees. Ideal candidates must be available to work 1st, 2nd, or 3rd shift, in a 24 x 7 operation. This position requires strong electrical background and must pass electrical assessment.Responsibilities:·Troubleshooting, adjusting, and replacing AC and DC electrical equipment such as batteries, control stations, fuses, motor starters, relays, switches, timers, servo driven equipment, photo electrical devices, transducers, Variable Frequency Drives (VFD’s) and encoders·Inspecting, troubleshooting, repairing, and/or replacing mechanical components such as motors, reducers, drive chains, sprockets, sheaves, pulleys, rollers, conveyor belts, bearings, and transfer plates·Inspecting, troubleshooting, repairing, and/or replacing pneumatic equipment such as diverters, lubricators, hoses, and coils·Inspecting, troubleshooting, repairing, and/or replacing hydraulic equipment such as hoses, fittings, cylinders, and pumps·Welding equipment such as handrails, conveyor supports, package handling equipment, carts, and grating as defined by scope of work·Performing preventive maintenance inspections of plant equipment such as conveyors, bulk carts, and power industrial equipmentOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $38.02 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Forbes List of America's Best Employers Move forward with us! At NJ TRANSIT, you'll join us in transforming the third-largest transportation agency in North America. We are committed to delivering safe, reliable service that gets our customers to their destinations on timeand we’re looking to hire talented folks with a love of learning to make it all possible. Under the direction of the Superintendent or Foreman, a Special Mechanic - Welder is responsible for repairingNJ TRANSIT buses for maintenance work and handle welding tasks. Main Functions: Conducts a variety of testing, repair, installation and maintenance tasks on equipment including engines, brake systems, suspension, steering, electronics, electrical systems, HVAC, transmission, and painting equipment, as well as: 1.Ability to understand and carry out written and verbal instructions and follow established policies and procedures. 2.Be able to diagnose and repair all electric I/O Controls and Multiplex Wiring Systems. 3.Have the ability to complete wiring conversion for buses with 12v, 24v, 110v and High voltage (EV buses). 4.Must have the mechanical ability. Be able to disassemble and reassemble complete electrical components. 5.Must have a working knowledge of reading electrical schematics. Be able to diagnose and repair electrical faults including wiring repair. 6.Be able to diagnose and repair electrical components on all computer-controlled engines and transmissions. 7.Must have the ability to trouble-shoot, analyze and implement effective solutions for operational faults on hybrid vehicle systems and components. 8.Be able to trouble-shoot and repair all electrical components. 9.Working knowledge of air conditioning and electrical systems. 10.Must be able to diagnose and program with a computer all engines, transmissions, and various other systems (i.e., HVAC etc.). 11.Demonstrate ability in the proper use of tools and diagnostic equipment. 12.Must be able to use and read parts manual and be able to fill out required forms. 13.Must be willing to work overtime when required. 14.Must keep area clean, uncluttered, and safe. Must follow established shop safety policies and procedures. Education and Experience Requirements: Must have a high school diploma or GED, ASE certification a plusMust have a CDL licenseMust have five years' experience in the welding field.Be able to pass the pre-employment physical and background checksMust be certified and able to supply copies of prior certifications and able to read blueprints, sketches, and drawingsMust be willing to work overtime when required At NJ TRANSIT, you will enjoy a competitive salary and excellent benefit package: Full benefit package including medical, prescription, dental & visionPension plan plus 457 tax-deferred savings planGrowth OpportunitiesPaid time off At NJ TRANSIT, we support and depend upon the diversity of our staff. NJ TRANSIT is an Equal Opportunity Employer. This position is deemed safety sensitive per the Department of Transportation (DOT) Drug and Alcohol Testing Regulations. The DOT Drug and Alcohol Testing Regulation 49 CFR Part 40 does not authorizethe use of marijuana for any reason. It is unacceptable for any safety-sensitive employee subject to drug testing under DOT regulations to use recreational or medical marijuana. The prohibitionincludes any derivative of marijuana such as CBD oils, teas, etc. The use of recreational and medical marijuana is a violation of NJ TRANSIT’s Drug and Alcohol-Free Workplace Policy for safety-sensitive employees. INDBU2

Line of Business: Cement & WhiteAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingInstall, maintain, and repair electrical systems and equipment.Troubleshoot and diagnose electrical issues efficiently.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, sensors. Troubleshoot equipment including VFD, multilin. Rewires motors.Collaborate with team members to complete projects on time.Maintain accurate records of work performed.What Are We Looking ForIndustrial Electrician experience required; 5 years overall electricianexperience required.Certification as an Industrial Electrician; or equivalent combination of education and training required.Abilityto apply concepts of basic algebra and geometry in practical situations.System knowledge of HMI and PLC control systems. Rockwell/Allen Bradley experience preferredEffective communication and teamwork abilities.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, elevated noise level and working extended hours as needed.What We Offer$36.00 to $42.00 per hour.Company benefits for Medical, Dental, Vision, Disability and more.Union paid PTO, and holidays. 401K match.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $45-$58 per hour DOE.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.JOB SUMMARYCoolSys Energy Solutions (CES) is currently seeking a CoGen Service Technician to inspect and diagnose on-site Power Generation and related equipment. Responsibilities: Must be thoroughly familiar and have detailed knowledge of all aspects of our product offerings including CHP and Balance of Plant (including not limited to HRSG, radiators, steam/hydronic boiler, absorption chiller, chiller, standby generators, automatic transfer switches, switchgear), island and parallel operation, Comap control system, Building Management Systems, all regarding assembly, repair, wiring, re-building, testing, and troubleshooting.Regularly travel to jobsite locations to perform preventive maintenance, corrective maintenance, unscheduled service, and troubleshooting, mechanical & electrical repairs on natural gas and biogas engines, generator sets, CHP power generation equipment, and related equipment.Monitoring system performance via remote control on-line, diagnoses technical malfunctions / operator errors, and provides solutions.Interface with system operators/field technicians and provides technical guidance.Performance of engine overhauls, electrical & mechanical testing, calibration and commissioning.Must provide clear and concise reports of all work performed daily for both internal and external reporting, observe and report conditions that could result in unscheduled or corrective maintenance, and communicate in a timely manner.Maintain designated project & service records, and practice consistent record keeping.Contribute to a pleasant and positive work atmosphere where all team members feel important and responsible.Adapt to the diverse needs of a small team and address internal and external requirements with flexibility and creativity.Regularly improve and update product knowledge by participating in educational and product training opportunities.This description contains information necessary to describe and evaluate the job. It should not be construed as a detailed description of all work performed but indicates the kinds of duties and skills expected.The position must complete other work tasks as assigned. Qualifications: The candidate must have a strong reciprocating engine and electrical background with the ability to display a high level of skill and understanding regarding internal combustion engines, generator sets, ideally natural gas engines, but will consider applicants that have experience with diesel standby or other engine technologies (e.g. compression engines).Will also consider technicians that have a more holistic background and excellent experience and trackrecord around complex technologies like aircraft engines and turbines.Be able to complete technical start-up of gas engines and CHP power systems.Independently diagnose and repair power systems.Basic working knowledge of advanced controls, safety shut-downs, circuit breakers and control panelwiring.Must be available to work over-time and occasionally travel on weekends.Must be able and willing to travel.Must be able to work independently.Excellent written and verbal communication skills and demonstratedproficiency composing writtencommunications.Outstanding interpersonal skills.Excellent telephone skills and computer knowledge.High energy level, comfortable performing multifaceted projects in conjunction with day-to-day activities.Resourceful, well organized, highly dependable, efficient and detail oriented.Must present a positive, professional, and team player attitude.Must be flexible and able to adapt to change quickly.Must possess a valid driver’s licenseExperience and knowledge of IP Networking including troubleshooting Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Line of Business: OtherAbout Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform diagnostic assessments and repairs on mobile equipment to ensure optimal performance.Conduct preventative maintenance, inspections, and adjustments to minimize downtime.Utilize troubleshooting techniques to identify and resolve mechanical, hydraulic, and electrical issues.Maintain accurate service records and adhere to safety procedures and regulatory requirements.Collaborate with team members and supervisors to support operational efficiency.What Are We Looking ForStrong mechanical aptitude with experience in mobile equipment maintenance and repair.Proficiency in troubleshooting hydraulic, electrical, and mechanical systems.Ability to work independently and as part of a team in a fast-paced environment.Strong attention to detail and commitment to workplace safety.Effective communication and problem-solving skills.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$34.50 to $36.04 per hour.Benefits through the Union for Medical, Dental, Vision, and Pension.Union paid vacation, sick leave, and holidays.

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:This position performs aircraft maintenance on UPS fleet to meet or exceed airworthiness standards. Performs the change, removal, replacement, or upgrade of aircraft components to correct failures or implement changes. Conducts troubleshooting of complex pneumatic, hydraulic, engine, and structural components and systems. This position documents procedures per established processes to ensure regulatory compliance.Job Responsibilities Responsible for the maintenance and preventive maintenance of aircraftOperate and maintain UPS equipment safelyRun, taxi, and tow aircraft for the purpose of maintenance and repositioning of aircraft as trained and qualified to do soDetermines airworthiness of aircraft and components, in accordance with established procedure and Federal Aviation RegulationCompletes aircraft maintenance forms entries and enters data into a Maintenance Data Systems, ensures entries are accurate and completeServices and inspects aircraft, components, and related equipmentEnsure consistent, accurate aircraft maintenance by properly completing turnover entries on unfinished maintenance in the turnover logFollow all Maintenance Department policies and proceduresKeep a clean and orderly work environmentMake recommendations to improve functions within the Maintenance DepartmentAttend UPS assigned trainingPerform other duties as assigned by Line Maintenance Supervisor or the Director of MaintenanceRequired QualificationsMust have a High School Diploma or GED equivalent Must have a valid FAA Airframe and Powerplant license Must have a valid driver’s license Must have a minimum of three (3) years aircraft maintenance experience that could include but not limited to: Boeing, Airbus and/or McDonnell Douglas aircraft Military jet aircraft Regional /Commuter aircraft Knowledge of computer systems Troubleshooting skills and ability to read and interpret Aircraft Manuals and Illustrated Parts CataloguesFederal Aviation Administration required Drug Testing Information (FAA):As part of the UPS pre-employment process for a safety sensitive position, a drug screen is required. UPS Must receive a negative test result before you can be put into a safety sensitive position (14 CFR Part 120.107).Please be advised that you will be tested in accordance with 14 CFR Part 120.109(a)(5) and 14 CFR 120 Subpart E to determine the presence of marijuana, cocaine, opiates (including codeine, heroin-6AM, morphine), opioids-hydrocodone, hydromorphone, oxycodone & oxymorphone, phencyclidine (PCP), and amphetamines/methamphetamines (including MDMA, MDA) or metabolites of these drugs.Starting Pay:$30.13Benefits: Competitive weekly payMedical, dental, and vision after waiting periodDefined-benefit pension plan401(k)Paid vacationPaid holidaysPaid Sick and Family and Medical Leave time as required by lawDiscounted Employee Stock Purchase Program Employee Assistance Program*This job post is for EWR gateway only*Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Move forward with us! At NJ TRANSIT, you'll join us in transforming the third-largest transportation agency in North America. We are committed to delivering safe, reliable service that gets customers to their destinations on time–and we're looking to hire talented folks with a commitment to excellence to make it all possible Summary: Manage day-to-day engineering operations for Newark Light Rail (NLR) systems, ensure the safety levels of its infrastructure, planning of capital and maintenance improvement projects, participate in post incident investigations, and routine interface and coordination with the Superintendents of Maintenance of Equipment and Transportation for daily operational requirements. Roles and Responsibilities: Responsible for the day-to-day engineering operation for Newark Light Rail (NLR) systems 24-hours, 7 days per week, which requires routine interface and coordination with the Superintendents of Maintenance of Equipment and Transportation for daily operational requirements.Responsible for ensuring that safety performance is a key priority throughout all levels of the NLR systems infrastructure, through the reliable and confirmed application of safety briefings, meetings and routine work-site and equipment inspections.Responsible for ensuring the proper oversight and implementation of the Roadway Worker Protection program.In coordination with the Safety Department, develops and implements employee safety and training programs for NLR infrastructure engineering.Schedules and controls all facets of the general maintenance process, to include preventative maintenance of all NLR systems, i.e., Traction Power Infrastructure (OCS & Substations), Train Control, SCADA, Track, Ventilation and Auxiliary Electrical/lighting; also responsible for the maintenance of the Vehicle Base Facility and NLR Penn Station infrastructure.Ensures all system assets are maintained to a state-of-good repair and reliability.Coordinates the planning of capital and maintenance improvement projects with Capital Planning & Programs, to include track outages, force account support and third party work activities/outages.Responsible for the preparation of plans, specifications, contract documents, testing methodology, proposals and cost estimates for all NLR improvement projects and products.Manages/monitors the administrative process for assigned projects, including the requisition process associated with MOW projects.Also, on an as-needed basis, makes timely/economic recommendations to change orders.Carries out consultant and technical service selections, and provides the technical support to LRT staff regarding questions and submittals based on technical input from consultants.Provides LRT management and personnel with engineering technical support and trouble-shooting expertise to analyze systems and component failures and trends; develops products and methods for maintenance and repair.As a primary member of the NLR Tiger Team, participates in post incident investigations and other events that could be enigmatic in nature, in an effort to determine root casual factors and reinforce and/or establish safe standard/practices.Responsible for the managing MOW budgets.Submits reports related to incidents, investigations, status, etc., as directed by the AGM.Manages/preserves an equitable labor relations process within the department that is consistent with prevailing agreements between NLR and the ATU.Officiate or delegates the conduct of MOW 1st Step Labor Hearings on an as-needed basis.Manages/monitors the maintenance and construction process, to include installation, testing, start-up and activation.Responsible for workforce development and career path implementation, to ensure a smooth and effective staff transition following the departure of more experienced employees.Administers the analysis, preparation, development, implementation, control and monitoring of the operating and capital budget for NLR infrastructure engineering to ensure long-term maintenance. This Position Supervises: Assistant Superintendent TrackAssistant Superintendent ET & SignalsForeman(s)Agreement Personnel Education, Experience, and Qualifications: Bachelor’sDegree in Electrical Engineering or related area or equivalent and five (5) years of experience in maintenance, design, construction and operation of electrified railway to include track, SIGNALS, TRACTION POWER and auxiliary systems for right-of-way operations; other auxiliary systems include auxiliary electrical and emergency evacuation tunnel ventilation systems.Must possess progressive experience in managing/supervising all facets of railway MOW programs/systems, and extensive knowledge and experience with supervising a railway agreement workforce, as well as a non-agreement/management staff charged with the direct supervision of agreement personnel and the MOW maintenance process.Must also possess a thorough understanding of railway safety issues and how those issues affect service, staff and customers is required Knowledge and Skills: Solid negotiation, customer service, time management, decision-making and communications skills (written and verbal) are required.Ability to work in a team environment. Excellent skills utilizing PC systems and MS Office (or similar) applications; Dimensions (Timekeeping), VMIS/Trapeze, SCADA, Emergency Ventilation, EPS (discipline system) and Oracle. Certificates, Licenses, Registrations & Working Environment: Office environment with occasional chances of being on the ROW for incidents/events/inclement weather.Physical Demands Other ConditionsThis position may involve periods of time in which stepping over rail and walking on uneven surfaces in the Yard or ROW will be necessary.Must be able to respond to NLR Incidents/Accidents as needed on 24-hours basis, 7-days a week. At NJ Transit, you will enjoy a competitive salary and excellent benefits package: Comprehensive Family Health Insurance – Medical, Prescription, Dental, VisionFlexible Spending AccountLife InsurancePaid LeaveTuition AssistancePre-Tax Commuter BenefitsPlanRetirement Plans401(a) - Retirement plan with a 6% employer contribution401(k) - Retirement saving plan with up to an 3% company match457(b) - Deferred Savings Plan At NJ TRANSIT, diversity and inclusivity are vital to our success as we are committed to hiring individuals from diverse backgrounds, experiences, abilities, and veteran status. As an Equal Opportunity Employer, we encourage all qualified applicants to apply and join our team. Learn more about NJ TRANSIT! Sign up to receive an invitation to our next live information session atWWW.NJTRANSIT.COM/BEST INDCO1

Line of Business: Cement & WhiteAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingInstall, maintain, and repair electrical systems and equipment.Troubleshoot and diagnose electrical issues efficiently.Replaces or repairs faulty electrical components of machinery, such as relays, motors, switches, sensors. Troubleshoot equipment including VFD, multilin. Rewires motors.Collaborate with team members to complete projects on time.Maintain accurate records of work performed.What Are We Looking ForIndustrial Electrician experience required; 5 years overall electricianexperience required.Certification as an Industrial Electrician; or equivalent combination of education and training required.Abilityto apply concepts of basic algebra and geometry in practical situations.System knowledge of HMI and PLC control systems. Rockwell/Allen Bradley experience preferredEffective communication and teamwork abilities.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, elevated noise level and working extended hours as needed.What We Offer$36.00 to $42.00 per hour.Company benefits for Medical, Dental, Vision, Disability and more.Union paid PTO, and holidays. 401K match.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: OtherAbout Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform diagnostic assessments and repairs on mobile equipment to ensure optimal performance.Conduct preventative maintenance, inspections, and adjustments to minimize downtime.Utilize troubleshooting techniques to identify and resolve mechanical, hydraulic, and electrical issues.Maintain accurate service records and adhere to safety procedures and regulatory requirements.Collaborate with team members and supervisors to support operational efficiency.What Are We Looking ForStrong mechanical aptitude with experience in mobile equipment maintenance and repair.Proficiency in troubleshooting hydraulic, electrical, and mechanical systems.Ability to work independently and as part of a team in a fast-paced environment.Strong attention to detail and commitment to workplace safety.Effective communication and problem-solving skills.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$34.50 to $36.04 per hour.Benefits through the Union for Medical, Dental, Vision, and Pension.Union paid vacation, sick leave, and holidays.

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

***Now Offering Signing Bonuses for CDL A/B License and Permit Holders*** Forbes List of America's Best Employers 2022, 2023, & 2024 Move forward with us! At NJ TRANSIT, you'll join us in transforming the third-largest transportation agency in North America. We are committed to delivering safe, reliable service that gets our customers to their destinations on timeand we’re looking to hire talented folks with a love of learning to make it all possible. Summary Conducts removal, replacement, and/or alignment on all body parts and components fastened to NJ Transit Busses. Roles and Responsibilities: Ability to perform body work and accident repairs.Ability to lay out work, fabricate items as needed, and assemble same.Demonstrate ability with the use of tools - hydraulic pistons, come-a-longs, - porta-powers, frame straightening devices, etc.Must be able to remove, replace and/or align all body parts and components that are fastened on the bus (MCI, Nova, Neoplan, and Nabi Coaches).Must be able to work in confined areas using respirators and full air supplied self-contained overalls.Ability to fill and sand body parts and fiberglass.Must be able to cut and tack weld.Must be able to fill out forms; be able to read and understand parts manuals required in carrying out duties for this position.Must have a valid CDL license, Class B with "P" endorsement and medical certificate.Accurately fill out daily time tickets.Keep area clean, uncluttered, and safe. Must follow established Shop safety policy and procedures.Must be willing to work overtime when requested Education, Experience, and Qualifications: Must be at least 21 years of ageMust have a high school diploma or GED, ASE certification a plusPossess at least three (3) years of auto body shop experiencePossess a valid NJ Licensewith the ability to obtain a CDL License with passenger endorsementORpossess a valid NY/PA CDL with passenger endorsementBe able to pass the pre-employment physical and background checksHave a good driving record with less than five (5) pointsNormal working hours are 7:30 am-4:00 pm Monday to Friday (possible overtime) At NJ TRANSIT, you will enjoy a competitive salary and excellent benefit package: $6,000 Signing Bonus for CDL A or B License Holders (must have air brake and passenger endorsement)*$3,000 Signing Bonus for CDL A or B Permit Holders with air brake and passenger endorsement (also CDL A or B licenses holders that have either air brake or passenger endorsement)*Full benefit package including medical, prescription, dental & visionPension plan plus 457 tax-deferred savings planGrowth OpportunitiesPaid time offAssistance obtaining CDL (for NJ applicants only) At NJ TRANSIT, diversity and inclusivity are vital to our success as we are committed to hiring individuals from diverse backgrounds, experiences, abilities, and veteran status. As an Equal Opportunity Employer, we encourage all qualified applicants to apply and join our team. Learn more about NJ TRANSIT! Sign up to receive an invitation to our next live information session atWWW.NJTRANSIT.COM/BEST *Terms and Conditions Apply. This position is deemed safety sensitive per the Department of Transportation (DOT) Drug and Alcohol Testing Regulations.The DOT Drug and Alcohol Testing Regulation 49 CFR Part 40 does not authorizethe use of marijuana for any reason. It is unacceptable for any safety-sensitive employee subject to drug testing under DOT regulations to use recreational or medical marijuana. The prohibitionincludes any derivative of marijuana such as CBD oils, teas, etc. The use of recreational and medical marijuana is a violation of NJ TRANSIT’s Drug and Alcohol-Free Workplace Policy for safety-sensitive employees. Code: INDBU2

Line of Business: OtherAbout Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform diagnostic assessments and repairs on mobile equipment to ensure optimal performance.Conduct preventative maintenance, inspections, and adjustments to minimize downtime.Utilize troubleshooting techniques to identify and resolve mechanical, hydraulic, and electrical issues.Maintain accurate service records and adhere to safety procedures and regulatory requirements.Collaborate with team members and supervisors to support operational efficiency.What Are We Looking ForStrong mechanical aptitude with experience in mobile equipment maintenance and repair.Proficiency in troubleshooting hydraulic, electrical, and mechanical systems.Ability to work independently and as part of a team in a fast-paced environment.Strong attention to detail and commitment to workplace safety.Effective communication and problem-solving skills.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$34.50 to $36.04 per hour.Benefits through the Union for Medical, Dental, Vision, and Pension.Union paid vacation, sick leave, and holidays.