Do you have at least 1 year of electrical experience in commercial or industrial environments Move forward with us! At NJ TRANSIT, you'll join us in transforming the third-largest transportation agency in North America. We are committed to delivering safe, reliable service that gets customers to their destinations on time–and we're looking to hire talented folks with a commitment to excellence to make it all possible. Electrician-Port Jervis, New York Roles and Responsibilities: Electricians troubleshoot and perform specialized maintenance on equipment including insulation, heating, ventilation, air conditioning, communication, lighting, door, propulsion, and automatic train control and air brake systems.Install, serviceand repairelectrical panels, wiring, lighting, and fixtures as well as specialized electrical equipment and machinery.Replace defective air filters, solid-state control boards, Freon, relays and pressure switches in HVAC system.Locate defective motor components using proper test equipment (meters).Perform safety control tests on doors, Cab Signal System,and braking systems.Replace defective pressure switches and micros switches in air brake system.Maintain and repair any electrical components on gear pullers, presses, and crane motors.Remove defective parts by dismantling devices; using hoists, cranes, and hand and power tools.Maintain continuity among work teams by documenting and communicating actions, irregularities, and continuing needs.Comply with all safety policies, practices, and procedures following routine and all standards of performance. Maintain a safe working environment. Education, Experience, and Qualifications: Pass NJ Transit’s Electrician Aptitude TestDemonstrate knowledge ofOHMS laws, instrumentation, digital circuits, communication, computersDemonstrate experiencewith control valves, transmitters, and PLCUnderstand high voltage systems, grounding systems, fuses, and transformer maintenanceTroubleshoot and repair basic electrical tools such as multi-meter, voltage tester, etc.Read electrical circuit diagrams and electrical blueprintsSuccessfully pass the pre-screening process including drug test, physical, and criminal, employer, and driving background checks.High School Diploma or GED Knowledge and Skills: Programming, PLCs, VFDs, industrial Ethernet, digital and 4-20ma controls along with a broad knowledge of industrial electrical systems and power distributionInstallation, repair, and troubleshooting of commercial or industrial electrical wiringThe military performing heavy-duty repair experience (airplanes, ships, steel mills, etc.)Trade school, electrical, diesel-mechanical maintenance, and/or technical experience Physical Requirements: Lift up to 70 pounds occasionallyStoop, bend, crawl, balance, climb, kneelBe exposed to equipment that intensifies the heat factor on an occasional basisWear protective equipment such as hardhat, safety glasses, and safety-toe boots Work Location: Port Jervis, New YorkThis is a Unionized position. Rate of pay: The pay rates are tiered and are non-negotiable based on years and types of experience.Tiers start at $29.10 (80% of the full rate).The 100%-tiered rate is $36.38. At NJ Transit, you will enjoy a competitive salary and excellent benefits package: Comprehensive Family Health Insurance – Medical, Prescription, Dental, VisionFlexible Spending AccountLife InsurancePaid LeaveTuition AssistancePre-Tax Commuter BenefitsPlanRetirement Plans 401(a) - Retirement plan with a 6% employer contribution401(k) - Retirement saving plan with up to an 3% company match457(b) - Deferred Savings Plan At NJ TRANSIT, diversity and inclusivity are vital to our success as we are committed to hiring individuals from diverse backgrounds, experiences, abilities, and veteran status. As an Equal Opportunity Employer, we encourage all qualified applicants to apply and join our team. Learn more about NJ TRANSIT! Sign up to receive an invitation to our next live information session at WWW.NJTRANSIT.COM/BEST This position is deemed safety sensitive per the Department of Transportation (DOT) Drug and Alcohol Testing Regulations. The DOT Drug and Alcohol Testing Regulation 49 CFR Part 40 does not authorizethe use of marijuana for any reason. It is unacceptable for any safety-sensitive employee subject to drug testing under DOT regulations to use recreational or medical marijuana. The prohibitionincludes any derivative of marijuana such as CBD oils, teas, etc. The use of recreational and medical marijuana is a violation of NJ TRANSIT’s Drug and Alcohol-Free Workplace Policy for safety-sensitive employees. INDRA1

Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network.Come join us to create what’s next. Let’s define tomorrow, together.DescriptionAt United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they’re well taken care of and ready to get our customers to their desired destinations. If you’re ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape.The sign-on bonus is exclusively for external candidates; internal applicants are not eligible to receive the sign-on incentive.Key Responsibilities:Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipmentRequires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervisionJourneyman electrical license a plusRequires the ability to make low and high voltage repairs to all building electrical equipmentThis includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devicesYou should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyorsFacilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditionsSchedules are bid and awarded according to seniorityFacilities Technicians are represented by the International Brotherhood of Teamsters (IBT)Salary increases will be administered according to the current IBT/United contractNew employees are required to join the union within ninety (90) days of employmentThere is an initiation fee for joining the union and subsequent monthly union dues which are set by the Local LodgeUnited values diverse experiences, perspectives, and we encourage everyone who meets the minimum qualifications to apply. While having the “desired” qualifications make for a stronger candidate, we encourage applicants who may not feel they check ALL of those boxes! We are always looking for individuals who will bring something new to the table!What’s needed to succeed:Twenty Four months experience required in at least three of the following areas:Electrical (including 480 volt, 3 phase)Structural (including steel frame construction)HVAC (including building management systems)Mechanical (including conveyors)PlumbingPLC electronic/computer controlsMust have completed high school diploma, GED or equivalentAbility to maintain and repair all building disciplines, heavy mechanical and weldingWork may be indoors or outside or in elevated areas anywhere on airportMust be able to climb and work from ladders, and/or walk for extended periodsModerate liftingMust possess sufficient tooling to perform required tasksComputer experience for input and retrieval of dataQualified candidates must be immediately available for full time employmentMust possess a valid, clean, applicable state driver's licenseQualificationsUnited values diverse experiences, perspectives, and we encourage everyone who meets the minimum qualifications to apply. While having the “desired” qualifications make for a stronger candidate, we encourage applicants who may not feel they check ALL of those boxes! We are always looking for individuals who will bring something new to the table! What’s needed to succeed: Twenty Four months experience required in at least three of the following areas:Electrical (including 480 volt, 3 phase)Structural (including steel frame construction)HVAC (including building management systems)Mechanical (including conveyors)PlumbingPLC electronic/computer controlsMust have completed high school diploma, GED or equivalentAbility to maintain and repair all building disciplines, heavy mechanical and weldingWork may be indoors or outside or in elevated areas anywhere on airportMust be able to climb and work from ladders, and/or walk for extended periodsModerate liftingMust possess sufficient tooling to perform required tasksComputer experience for input and retrieval of dataQualified candidates must be immediately available for full time employmentMust possess a valid, clean, applicable state driver's license What will help you propel from the pack: Electronics diagnostics and troubleshootingThe starting rate for this role is $32.65.This is also a bonus eligible position (i.e. profit sharing).We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement).United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. Equal Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT.We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact to request accommodation.

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $30-$50 per hour DOE. Ongoing Education & Training:Access to state-of-the-art facilities and paid online training.Comprehensive Benefits:Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work:Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks:Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: The Apprentice (HVAC or Refrigeration) provides support to an installation team by completing tasks in a safe, prompt, accurate, and professional manner and following customer specifications, applicable building codes, and proper piping practices.ESSENTIAL DUTIES AND RESPONSIBILITIES:Install equipment, by project requirements and under the direction of a senior technician:HVAC: air handler drains, piping for split systems, overhead duct hangers and ductwork, etc.Refrigeration: display case drains, walk-in box drains, overhead hangers, and piping, etc.Perform all assigned work safely and responsibly. Use power and hand tools, powered vehicles, machinery, and PPE as directed and required by Source, customer, and contract policy.Escalate problems and concerns (safety, quality of work, etc.) to on-site senior technicians or project managers promptly.Always maintain clean and professional job sites/work areas. Properly store, disassemble, or remove all spare and waste materials created on assigned job sites.Provide assistanceand support to senior technician/s on a job.Carry out all responsibilities in an honest, ethical, and professional manner.Perform other duties as assigned.Installation of all types of piping including PVC, copper (brazing), copper line sets. Qualifications: Education or experience equivalent to a High school diploma, GED, or completion from trade program or technical school.· 5+ years of experience in the construction, refrigeration, HVAC, or other related industry/trade preferred.· Ability to operate a scissor lift or forklift preferred.· Knowledge of jobsite safety, ability to perform work in accordance with safe work practices and rules.· Ability to use basic power and hand tools including drills, fuel gas tools, electrical meters, measurement tools, etc.· Ability to be punctual and dependable.· Ability to work in a variety of working conditions, including scaling ladders to various heights, outdoors in hot/cold temperatures, in noisy environments, etc.· Ability to perform basic mathematical calculations including fractional addition/subtraction, multiplication, division, and measurements.· Ability to read, write and communicate timely, clearly and concisely.· Ability to work constructively in a team environment and follow instructions from senior technician.· Ability to understand and follow all company policies and procedures and all applicable State and Federal laws.· Good driving record. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.CoolSysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) and drug testing are required for all positions. CoolSys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refrigeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Clean HarborsLinden, NJis looking for aMobile Vehicle Mechanicto join their safety conscious team!This position will be responsible for routine maintenance, inspections, and repairing of all company fleet at branch locations throughout the area.Why work for Clean Harbors Health and Safety is our #1 priority, and we live it 3-6-5!Competitive wagesPay starting at $28-$38 an hour based on experience.Opportunity for increase after 90 days!!!Comprehensive health benefits coverage after 30 days of full-time employmentGroup 401K/RRSP with company matching component.Opportunities for growth and development for all the stages of your careerGenerous paid time off!Company paid training!Tuition reimbursement!Company provided uniforms and PPE!State of the art facilities, technology, and toolingAccess to company paid OEM certifications and trainings!Speak with a recruiter today to learn more!!RESPONSIBILITIESEnsuring that Health and Safety is the number one priority by complying with all safe work practices, policies, and processes and acting in a safe manner at all times.Correct all equipment deficiencies and perform preventative maintenance on company owned equipment as directed by management.Ability to perform thorough inspection of equipment and identify unsatisfactory condition.Full compliance with mandatory PPE requirements during all work-related activities and tasksTravel to other locations to perform repairs and maintenance on equipment as required.Completes and submits all associated paperwork as required for tracking PM schedules.Maintain active light duty or DQ driver status as per mobile vehicle type.Performs other duties and tasks as assigned from time to time by management.QUALIFICATIONSHigh School diploma or equivalent required.Valid driver's license and clean driving record.1+ years prior experience working on heavy duty-trucks and light duty trucks and equipment.1+ years DOT inspection experience requiredStrong mechanical ability.Must be able to provide own basic tools.Willingness to travel within assigned territory up to 70%.Attention to detail.Strong communication skills.Strong organizational skills.Ability to work flexible shifts including nights, weekends, and overtime as required.Ability to determine vehicle condition by conducting inspections, scheduled PM's and diagnostic tests; identifying worn and damaged parts & replacement as needed.Ability to pass a background, drug, and physical test upon hire.40-years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials.Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us.Join our safety focused team today!To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/.Clean Harbors is an equal opportunity employer.Clean Harbors is committed to providing access, equal opportunity and reasonable accommodation for individuals with disabilities in employment, its services, programs, and activities. To request reasonable accommodation, contact or 1-.Clean Harbors and its subsidiaries are a Military & Veteran friendly company.“2022 Top Company for Women to Work for in Transportation”*CH#LI-KB1

Company Description: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere.At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown’s history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them.From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward.We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team.Want to Learn More Watch A Day in the Life of a Crown Field Service Technician! click here.This position is based out of our Oakland, NJ branch location and will provide coverage in Morris County and WarrenCounty and the surrounding areas. Job Responsibilities:Troubleshoot, diagnose, and repair Crown and all other makes of lift trucks.Perform all assigned planned maintenance on customer lift trucks. Maintain a service van and its inventory. Process paperwork after completion of each job. Qualifications:High school diploma or equivalent.Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics.Good written/verbal communication and customer care skills.Valid driver's license, good driving record, and ability to safely operate lift trucks.Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred.Work Authorization:Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire.No agency calls please.Compensation and Benefits:Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more.Crown also offers Service Technicians:Award-Winning Service TrainingCompany Vehicle for Field Service TechniciansTool InsuranceNo Flat Rate40 Hours Per Week plus OvertimeUniformsSpecialty ToolsPrimarily 1st ShiftCareer Advancement OpportunitiesEOE Veterans/Disabilities

Line of Business: AggregatesAbout Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine maintenance and repairs on plant equipment to ensure operational efficiency.Troubleshoot mechanical issues and implement effective solutions to minimize downtime.Conduct inspections and preventive maintenance on conveyors, crushers, and other equipment.Adhere to safety regulations and maintain a clean, organized work area.Collaborate with team members to optimize plant performance and reliability.What Are We Looking ForProficiency in diagnosing and repairing mechanical systems and components.Ability to interpret technical drawings, schematics, and manuals.Strong problem-solving skills with a focus on efficiency and safety.Capability to work independently and as part of a team in a fast-paced environment.Commitment to safety practices and adherence to company guidelines.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Must meet all requirements for safety compliance and job-related training.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$28-33 per hour401(k) retirement savings plan with an automatic company contribution as well as matching contributionsHighly competitive benefits programs, including:Medical, Dental, and Vision along with Prescription Drug BenefitsHealth Savings Account (HSA), Health Reimbursement Account (HRA), and Flexible Spending Account (FSA)AD&D, Short- and Long-Term Disability Coverage as well as Basic Life InsurancePaid Bonding Leave, 10 days of Paid Vacation, 40 hours of Paid Sick Leave, and 10 Paid HolidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Line of Business: Cement & WhitePosition title: Mobile Mechanic - 1st ClassJob location:Nazareth, PAAbout Us:Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be Doing:Perform maintenance and repairs on a variety of mobile equipment.Diagnose mechanical issues and implement effective solutions.Conduct regular inspections to ensure equipment is in optimal condition.Maintain accurate records of all maintenance and repair work.Collaborate with team members to ensure efficient workflow.What Are We Looking For:Minimum of 3 years' verifiable experience on heavy mobile equipmentStrong mechanical aptitude and problem-solving skills.Ability to work independently and as part of a team.Proficiency with diagnostic tools and equipment.Commitment to safety and quality standards.Conditions of Employment:Successful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work Environment:Role operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer:$37.70 per hourBenefits through the Union for Medical, Dental, Vision and PensionUnion paid vacation, sick leave and holidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

7PM-7AM - 3/4 scheduleWhat this job involves – You will be responsible for installing, maintaining, and repairing electrical systems in commercial and industrial buildings managed by JLL. You will ensure that all electrical work meets safety standards, building codes, and client specifications.What is your day to day Install, maintain, and repair electrical systems, including wiring, circuit breakers, transformers, and lighting fixtures.Read and interpret blueprints, schematics, and electrical drawings.Troubleshoot electrical issues and perform necessary repairs.Conduct regular inspections of electrical systems to ensure safety and compliance with regulations.Install and maintain building automation and energy management systems.Perform preventive maintenance on electrical equipment and systems.Collaborate with other trades and facility management team members on projects and maintenance tasks.Respond to emergency electrical issues in a timely manner.Maintain accurate records of work performed, including time and materials used.Adhere to all safety protocols and regulations, including OSHA standards.Stay current with industry trends, new technologies, and best practices in electrical work.Desired experience and technical skills Required Minimum of 3-5 years of experience as a commercial or industrial electrician.Strong knowledge of National Electrical Code (NEC) and local building codes.Proficiency in using electrical testing equipment and hand tools.Ability to read and interpret electrical schematics and blueprints.Experience with building automation systems and energy management systems is a plus.Strong problem-solving skills and attention to detail.Excellent communication and customer service skills.Ability to work independently and as part of a team.Willingness to work flexible hours, including occasional nights and weekends for emergency calls.Preferred High school diploma or equivalent; vocational training or associate's degree in electrical technology preferred.Valid electrician's license as required by the state of New Jersey.Physical RequirementsAbility to lift and carry up to 50 pounds.Comfortable working at heights and in confined spaces.Able to stand, walk, climb, and maintain balance for extended periods.#Ejobs

Thank you for your interest in working for our Company. Recruiting the right talent is crucial to our goals. On April 1, 2024, 3M Healthcare underwent a corporate spin-off leading to the creation of a new company named Solventum. We are still in the process of updating our Careers Page and applicant documents, which currently have 3M branding. Please bear with us. In the interim, our Privacy Policy here: https://www.solventum.com/en-us/home/legal/website-privacy-statement/applicant-privacy/ continues to apply to any personal information you submit, and the 3M-branded positions listed on our Careers Page are for Solventum positions. As it was with 3M, at Solventum all qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.Job Description:3M Health Care is now SolventumSolventum is seeking Electromechanical Maintenance Technician candidates to join our team in Flemington, NJ!Shift Options: 1st, 2nd or 3rd Shift (see under “Your Skills & Expertise”)Starting Pay: $40.06/hour + shift differentialsAt Solventum, we enable better, smarter, safer healthcare to improve lives. As a new company with a long legacy of creating breakthrough solutions for our customers’ toughest challenges, we pioneer game-changing innovations at the intersection of health, material and data science that change patients' lives for the better while enabling healthcare professionals to perform at their best. Because people, and their wellbeing, are at the heart of every scientific advancement we pursue.We partner closely with the brightest minds in healthcare to ensure that every solution we create melds the latest technology with compassion and empathy. Because at Solventum, we never stop solving for you.The Impact You’ll Make in this RoleAs an Electromechanical Maintenance Technician, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by:Troubleshooting, maintaining, and repairing mechanical and electrical equipment such as: AC/DC drives and motors, PLC’s, HMI’s, VFD’s, robotics, process controllers, stepper & servo motors, fire protection equipment, hydraulic and pneumatic devices, and plant support equipment.Installing, modifying, and upgrading electrical, electronic, mechanical, and computer equipmentSupporting the engineering, production, and maintenance of production, converting, assembly and packaging equipment.Troubleshooting, installing, and start-up of new equipment.Focusing on Continuous Improvement projects to drive improvements in OEE.Completing other duties as assigned or necessaryPossessing the ability to clearly speak, understand, and write in English to communicate effectively in both verbal and written contexts.Your Skills and Expertise To set you up for success in this role from day one, Solventum requires (at a minimum) the following qualifications:Associate degree or higher AND a minimum of two (2) years of industrial maintenance experienceOR High school diploma/GED AND a minimum of four (4) years of industrial maintenance experienceANDIn addition to the above requirements, the following are also required:Prior troubleshooting and repair experience with pneumatic, hydraulic, and electrical systems in an industrial environment.Ability to work one or more of the following shifts:1st Shift: M-F; 7am - 3pm2nd Shift: M-F; 3pm - 11pm3rd Shift: M-F; 11pm - 7amAbility to work weekends, overtime, or holidays as neededAdditional qualifications that could help you succeed even further in this role include:Two (2) year technical degree/diploma in a multi-craft technology program.Bachelor’s degree or higher in mechatronics, industrial electronics, robotics and automation, or engineering technologyAdvanced troubleshooting and repair experience working with pneumatic, hydraulic, and electrical systems in an industrial environment.Experience with reliability analysis, predictive (PdM), and preventative maintenance (PM)Demonstrated proficiency working with electro-mechanical equipment such as pumps, AC/DC motors, motor drives, PLC troubleshooting, etc.Experience with Automation Controls, Robotics and Industrial LasersExcellent technical communication skills, both written and oral to a diverse audience.Ability to read and understand mechanical and electrical drawingsDemonstrated strong problem-solving and computer skills.Possess excellent documentation skillsWork location: Onsite - 500 US Highway 202, Flemington, NJ 08822Travel: No TravelRelocation Assistance: Not AuthorizedMust be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).Supporting Your Well-beingSolventum offers many programs to help you live your best life – both physically and financially. To ensure competitive pay and benefits, Solventum regularly benchmarks with other companies that are comparable in size and scope.The starting rate of pay for this position is $40.06/hour, with the potential to reach $47.71/hour. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate’s relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: https://www.solventum.com/en-us/home/our-company/careers/#Total-RewardsResponsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Solventum is committed to maintaining the highest standards of integrity and professionalism in our recruitment process. Applicants must remain alert to fraudulent job postings and recruitment schemes that falsely claim to represent Solventum and seek to exploit job seekers.Please note that all email communications from Solventum regarding job opportunities with the company will be from an email with a domain of @solventum.com. Be wary of unsolicited emails or messages regarding Solventum job opportunities from emails with other email domains.Solventum is an equal opportunity employer. Solventum will not discriminate against any applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.Solventum Global Terms of Use and Privacy StatementCarefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at Solventum are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with theterms.

Competitive Pay Range: $25 - $30 per hour-based on 2-3+ years of hands-on tractor trailer maintenance experience.Schedule:Tuesday - Saturday, 10:00 p.m. to 6:30 a.m.Sign-on Bonus: $2,000NFI Division: Fleet ServicesRecruiter: Maria @Perks for Working with NFI:Career training & development opportunitiesASE Certification reimbursement & assist with study materialsApprenticeship ProgramSign-On Bonus of $2,000 paid out within the first 90 days of employmentDedicated internal company fleetNFI maintains all major tools401(K) with company matchPTO accrued on day one of employment - estimated 13 days per yearPaid Holidays - 8 days per yearMedical, Dental, RX, Vision, Disability, & Life InsuranceParental Leave according to FMLA state guidelinesBoot Allowance ProgramUniform & all safety PPE provided We have approved DOL Registered Apprenticeship and GI Bill® Apprenticeship Programs, which could allow qualifying service members to earn a monthly stipend of up to $2,000on top of your NFI earnings. Apply here to learn about your eligibility with our military specialists. #DT1 Pay Range: 25.00-35.00 per_hour, General Benefits: Perks for Working with NFI: Career training & development opportunities ASE Certification reimbursement & assist with study materials Apprenticeship Program Sign-On Bonus of $2,000 paid out within the first 90 days of employment Dedicated internal company fleet NFI maintains all major tools 401(K) with company match PTO accrued on day one of employment - estimated 13 days per year Paid Holidays - 8 days per year Medical, Dental, RX, Vision, Disability, & Life Insurance Parental Leave according to FMLA state guidelines Boot Allowance Program Uniform & all safety PPE providedTo become part of the NFI team you:Must have a valid driver's licenseMust have 2-3+ yearsof equivalent practical in-shop maintenance experienceFamiliarity with troubleshooting equipment repairs and maintenance with diagnostic tools and equipment such as JPRO, OEM Diagnostic Software, Multimeters, and WindowsMust have hands-on experience with repairing wheel seals, brake chambers, and other physical repairs on a tractor-trailer.Successfully demonstrated problem-solving skillsExamples of teamwork and customer service skills, including good oral and written communication skills.On-site evaluation with recommended trainingPreferred ability to obtain a Class B license Your responsibilities as a Diesel Technician / Mechanic will include, but are not limited to: Troubleshoot, diagnose, and repair electrical and mechanical tractor and trailer-related issues using standard testing procedures and computer diagnostic equipment such as JPRO, OEM Diagnostic Software, Multimeters, and WindowsPerformance preventive maintenance on our fleet of tractors & trailersPerform DOT inspection per FMSCA guidelinesPhysically capable to perform all job duties, which includes being able to lift and/or pull 75 lbs or more without restriction, stand or lie for extended periods, and have flexible movement to reach equipment. *GI Bill® is a registered trademark of the U.S. Department of Veterans Affairs (VA). More information about education benefits offered by VA is available at the official U.S. government website athttps://www.benefits.va.gov/gibill. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Federal law requires employers to provide reasonable accommodation to qualified individuals with disabilities. Please tell us if you require a reasonable accommodation to apply for a job or to perform your job. Email or call PC929

We are seeking experiencedCrew Leaders to work safely in the field for our Maintenance division.You will be a working team member who oversees all aspects of a crew from start to completion.What would my responsibilities be Supervise all lawn maintenance service activities of the crew,ensuring that all crew members have the required safety material, the training and tools needed to complete the job, and that they are always operating safely.Complete a pre-trip inspection report each day.Coordinate with branch management, customers, and employees as needed.Use landscaping tools and operate heavy equipment as needed. Safely drive crews to and from jobs, adhering to the Company's Safety Policy and ensuring that the public will be safe while in contact with crews.Why Join Yellowstone Competitive hourly pay,paid weeklyBenefits package including health, dental and vision insurance, 401k with a company matchIndustry-leading safety programsCompany provided safety gearEquipped with optimal and most professional equipmentHigh profile customers, worksites, and landscape results -A company that values and appreciates YOURequirementsLegal authorization to work in the United StatesExperience managing a crew consisting of laborers providing landscaping or related servicesMust have reliable transportation to the Branch or first job siteSafe driving record and ability to successfully pass a Motor Vehicle Report (“MVR”) requiredStrong English communication skills. Spanish a plusBecome part of the team dedicated to Excellence in Commercial Landscaping

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation:Competitive pay from$30-$50 per hour DOE. Ongoing Education & Training:Access to state-of-the-art facilities and paid online training.Comprehensive Benefits:Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work:Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks:Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: The Apprentice (HVAC or Refrigeration) provides support to an installation team by completing tasks in a safe, prompt, accurate, and professional manner and following customer specifications, applicable building codes, and proper piping practices.ESSENTIAL DUTIES AND RESPONSIBILITIES:Install equipment, by project requirements and under the direction of a senior technician:HVAC: air handler drains, piping for split systems, overhead duct hangers and ductwork, etc.Refrigeration: display case drains, walk-in box drains, overhead hangers, and piping, etc.Perform all assigned work safely and responsibly. Use power and hand tools, powered vehicles, machinery, and PPE as directed and required by Source, customer, and contract policy.Escalate problems and concerns (safety, quality of work, etc.) to on-site senior technicians or project managers promptly.Always maintain clean and professional job sites/work areas. Properly store, disassemble, or remove all spare and waste materials created on assigned job sites.Provide assistanceand support to senior technician/s on a job.Carry out all responsibilities in an honest, ethical, and professional manner.Perform other duties as assigned.Installation of all types of piping including PVC, copper (brazing), copper line sets. Qualifications: Education or experience equivalent to a High school diploma, GED, or completion from trade program or technical school.· 5+ years of experience in the construction, refrigeration, HVAC, or other related industry/trade preferred.· Ability to operate a scissor lift or forklift preferred.· Knowledge of jobsite safety, ability to perform work in accordance with safe work practices and rules.· Ability to use basic power and hand tools including drills, fuel gas tools, electrical meters, measurement tools, etc.· Ability to be punctual and dependable.· Ability to work in a variety of working conditions, including scaling ladders to various heights, outdoors in hot/cold temperatures, in noisy environments, etc.· Ability to perform basic mathematical calculations including fractional addition/subtraction, multiplication, division, and measurements.· Ability to read, write and communicate timely, clearly and concisely.· Ability to work constructively in a team environment and follow instructions from senior technician.· Ability to understand and follow all company policies and procedures and all applicable State and Federal laws.· Good driving record. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.CoolSysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) and drug testing are required for all positions. CoolSys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refrigeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

What this job involves: This role involves rotating weekly between two sites in Princeton, NJ, performing electrical maintenance, installation, and repair tasks in a pharmaceutical facility. The position requires expertise in industrial electrical systems, ability to read blueprints, troubleshoot equipment, and perform general maintenance duties.What your day-to-day will look like:Planning and executing electrical work involving installation, testing, maintenance, and repair of various electrical apparatus and control equipment.Interpreting blueprints, wiring diagrams, and schematic drawings to plan and organize work efficiently.Collaborating with clients and maintenance staff to determine optimal approaches for completing assignments safely and in compliance with environmental regulations.Installing electrical raceways, bus work, and performing necessary measurements, cutting, threading, and bending of conduit using appropriate tools.Troubleshooting and repairing faulty wiring, motors, and other electrical equipment.Diagnosing, maintaining, upgrading, and installing electrical/instrumentation equipment and systems in a large pharmaceutical facility.Anticipating potential issues and taking proactive measures to maintain facility structures and assets.Documenting all work performed and hours spent on tasks in the CMMS system.Performing associated tasks and collaborating with other trades as needed.Addressing general maintenance tasks, including plumbing issues and door repairs.Work Schedule: Monday through Friday, 7AM-3:30PMDesired or preferred experience and technical skills:CMMS Proficiency: Ability to document all tasks performed and hours spent using a computerized maintenance management system (CMMS).Collaboration: Strong collaboration skills to work effectively with clients and maintenance staff.Proactive Problem-Solving: Ability to anticipate potential issues and take pre-emptive action to maintain facility structures and assets.Experience in Pharmaceutical Facilities: Previous experience working in a pharmaceutical facility or similar environment.Instrumentation Skills: Experience in diagnosing, maintaining, upgrading, and installing instrumentation equipment and systems.Communication Skills: Strong verbal and written communication skills for effective documentation and interaction with team members.Required Skills and Experience:Electrical Expertise: Strong understanding of industrial electrical systems, including installation, maintenance, and repair of electrical apparatus and control equipment.Blueprint Interpretation: Ability to read and interpret blueprints, wiring diagrams, and schematic drawings.Troubleshooting Skills: Competence in diagnosing and repairing faulty electrical wiring, motors, and other equipment.Hands-On Experience: Experience with installing electrical raceways, bus work, and performing conduit measurements, cutting, threading, and bending.General Maintenance: Skills in performing general maintenance tasks, including plumbing and door repairs.Regulatory Compliance: Knowledge of and ability to adhere to environmental and safety regulations.#MMjobs#Ejobs

Schedule:Monday - Friday: First Shift 8:00 a.m. - 4:30 p.m.Average Pay Range: $28 - $32 / hr- pay will be determined by experience and certificationsSign-On Bonus: $2,000NFI Division: Fleet ServicesRecruiter: Patty @Perks for Working with NFI:Career training & development opportunitiesASE Certification reimbursement & assist with study materialsApprenticeship ProgramSign-On Bonus of $2,000 paid out within the first 90 days of employmentDedicated internal company fleetNFI maintains all major tools401(K) with company matchPTO accrued on day one of employment - estimated 13 days per yearPaid Holidays - 8 days per yearMedical, Dental, RX, Vision, Disability, & Life InsuranceParental Leave according to FMLA state guidelinesBoot Allowance ProgramUniform & all safety PPE provided #DT1 Pay Range: 28.00-32.00 per_hour, General Benefits: Perks for Working with NFI: Career training & development opportunities ASE Certification reimbursement & assist with study materials Apprenticeship Program Sign-On Bonus of $2,000 paid out within the first 90 days of employment Dedicated internal company fleet NFI maintains all major tools 401(K) with company match PTO accrued on day one of employment - estimated 13 days per year Paid Holidays - 8 days per year Medical, Dental, RX, Vision, Disability, & Life Insurance Parental Leave according to FMLA state guidelines Boot Allowance Program Uniform & all safety PPE providedYour responsibilities as a Diesel Technician / Mechanic will include, but are not limited to:Troubleshoot, diagnose, and repair electrical and mechanical tractor and trailer-related issues using standard testing procedures and computer diagnostic equipment such as JPRO, OEM Diagnostic Software, Multimeters, and WindowsPerformance preventive maintenance on our fleet of tractors & trailersPerform DOT inspection per FMSCA guidelinesPhysically capable to perform all job duties, which includes being able to lift and/or pull 75 lbs or more without restriction, stand or lie for extended periods, and have flexible movement to reach equipment. To become part of the NFI team you: Must have a valid driver's licensePreferred ability to obtain a Class B licenseTechnical or advanced degree or 2 years or more ofequivalent maintenance experienceFamiliarity with troubleshooting equipment repairs and maintenance with diagnostic tools and equipment such as JPRO, OEM Diagnostic Software, Multimeters, and WindowsSuccessfully demonstrated problem-solving skillsExamples of teamwork and customer service skills, including good oral and written communication skills.On-site evaluation with recommended training All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. The Company will consider qualified applicants, including those with criminal histories, in a manner consistent with applicable state and local laws. Federal law requires employers to provide reasonable accommodation to qualified individuals with disabilities. Please tell us if you require a reasonable accommodation to apply for a job or to perform your job.Email or call PC# 917

Overview: With over 150 years of experience,and headquartered in Southern CA, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets.WHY JOIN USWe understand that hiring great people is the foundation of everything we do. Our employee benefits packages include:Competitive pay from $70-93K Medical, Dental, Vision and Prescription coveragePaid vacation and holidays401(K)matchLife insurance, AD&D and long-term disabilityTuition reimbursementOpportunities availablenationwideEmployee discountson vehicles, hotels, theme parks, select cell phone bills and so much morePet InsuranceLegal Plan, and ID Theft ProtectionSUMMARYTo support our rapid growth, CoolSys Energy Design - Consulting Engineers (CED) is in search of a Senior Plumbing Engineer to join our team! Our ideal candidate will be able to design commercial plumbing and fire protection systems, maintain positive relationships with clients and vendors, and lead a team of staff to ensure timely and quality deliverables. Responsibilities: • Maintain responsible control over all design activities pertaining to the project, including engineering, quality control, and code compliance.• Perform site inspections to determine compliance with construction documents and resolve design issues during the construction phase.• Perform hydraulic calculations and work with outside resources to incorporate special hazard systems.• Document production of small and large projects.• Participate in conceptual design for specific projects.• Create and maintain AutoCAD and Revit drawing packages.• Provide deliverables and products such as calculations, drawings, and specifications related to plumbing.• Comply with project schedules, regulatory requirements, and industry best practices.• Ensure work is executed accurately and in a timely and cost-effective manner.• Ensure that design calculations and engineering drawings are constructible, comply with code, and meet customer quality requirements and company standards.• Manage, assign/prioritize workloads, and provide leadership to junior engineers performing plumbing and fire protection system design.• Assess and anticipate deliverables, prepare budgets and schedules, and communicate resource requirements to senior management.• Represent CoolSys Energy Design in project meetings covering technical issues, including meetings with utilities, owners, contractors, construction subcontractors, and inspectors. Qualifications: • Bachelor of Science degree in Mechanical Engineering. Other engineering or construction disciplines are considered based on experience and skill set.• 5 or more years of relevant professional experience.• Knowledge of Revit and AutoCAD required.• Previous experience managing staff is preferred.• Strong analytical, problem-solving, and decision-making capabilities, as well as demonstrated high-quality technical writing skills.• Team player with sound business ethics and the ability to multi-task in a fast-paced environment.• Ability to achieve project goals and deadlines with minimal supervision.• Willingness to work with all levels of internal staff, as well as outside clients and vendors to develop a full understanding of building energy systems and their operation.• High proficiency in Microsoft Office applications (Word, PowerPoint, Outlook, and Excel).• This position will require minimal travel to project sites. Join Us: Today, there are 27 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookand Twitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) and drug testing are required for all positions. CoolSys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation:Competitive pay from$35-$50 per hour DOE. Sign on Bonus: up to $3,000.00 DOEOngoing Education & Training:Access to state-of-the-art facilities and paid online training.Comprehensive Benefits:Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work:Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks:Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time.Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectationsProvides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner.Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base.Test malfunctioning systems and components using electrical and/or mechanical skills.Maintain legible corporate and personal records of work history.Provides department support by processing job tickets, and work orders to the necessary department promptly.Provide support by picking up, delivering, and installing cases.Perform work on minor construction and remodeling projects including startups of new installations.Drives company vehicle in a safe manner.Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED.EPA certification.Certification from an accredited vocational-technical or trade school is a plus!Minimum 5+ years of commercial refrigeration experience required.Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus.Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.Must have a good driving record and be able to work independently.Emergency on-call availability is a basic requirement.Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $45-$58 depending on experience.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.JOB SUMMARYCoolSys Energy Solutions (CES) is currently seeking a CoGen Service Technician to inspect and diagnose on-site Power Generation and related equipment. Responsibilities: Must be thoroughly familiar and have detailed knowledge of all aspects of our product offerings including CHP and Balance of Plant (including not limited to HRSG, radiators, steam/hydronic boiler, absorption chiller, chiller, standby generators, automatic transfer switches, switchgear), island and parallel operation, Comap control system, Building Management Systems, all regarding assembly, repair, wiring, re-building, testing, and troubleshooting.Regularly travel to jobsite locations to perform preventive maintenance, corrective maintenance, unscheduled service, and troubleshooting, mechanical & electrical repairs on natural gas and biogas engines, generator sets, CHP power generation equipment, and related equipment.Monitoring system performance via remote control on-line, diagnoses technical malfunctions / operator errors, and provides solutions.Interface with system operators/field technicians and provides technical guidance.Performance of engine overhauls, electrical & mechanical testing, calibration and commissioning.Must provide clear and concise reports of all work performed daily for both internal and external reporting, observe and report conditions that could result in unscheduled or corrective maintenance, and communicate in a timely manner.Maintain designated project & service records, and practice consistent record keeping.Contribute to a pleasant and positive work atmosphere where all team members feel important and responsible.Adapt to the diverse needs of a small team and address internal and external requirements with flexibility and creativity.Regularly improve and update product knowledge by participating in educational and product training opportunities.This description contains information necessary to describe and evaluate the job. It should not be construed as a detailed description of all work performed but indicates the kinds of duties and skills expected.The position must complete other work tasks as assigned. Qualifications: The candidate must have a strong reciprocating engine and electrical background with the ability to display a high level of skill and understanding regarding internal combustion engines, generator sets, ideally natural gas engines, but will consider applicants that have experience with diesel standby or other engine technologies (e.g. compression engines).Will also consider technicians that have a more holistic background and excellent experience and trackrecord around complex technologies like aircraft engines and turbines.Be able to complete technical start-up of gas engines and CHP power systems.Independently diagnose and repair power systems.Basic working knowledge of advanced controls, safety shut-downs, circuit breakers and control panelwiring.Must be available to work over-time and occasionally travel on weekends.Must be able and willing to travel.Must be able to work independently.Excellent written and verbal communication skills and demonstratedproficiency composing writtencommunications.Outstanding interpersonal skills.Excellent telephone skills and computer knowledge.High energy level, comfortable performing multifaceted projects in conjunction with day-to-day activities.Resourceful, well organized, highly dependable, efficient and detail oriented.Must present a positive, professional, and team player attitude.Must be flexible and able to adapt to change quickly.Must possess a valid driver’s licenseExperience and knowledge of IP Networking including troubleshooting Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems