POSITION SUMMARY: The Heavy Equipment Technician performs repairs and maintenance on heavy equipment, compact heavy equipment, light service equipment, and light trucks. Typical repairs include, but are not limited to, preventative maintenance inspections, hydraulic, fuel, exhaust, brakes, suspension, electrical, HVAC, and emission systems.PRINCIPAL RESPONSIBILITIES:Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment.Performs repair or preventative maintenance on electrical, diesel and gasoline vehicles, including compactor, excavator, wheel loader, and other vehicles to maximize safe and productive operations. Typical repairs and maintenance would include work on engines, transmissions, chassis, drivelines and body components, hydraulic, brake, electrical and suspension systems, wheels, tires and undercarriages.Reads and interprets equipment condition reports and/or repair orders, communicate with supervisor and/or operator for clarification of defects and discuss preventive techniques with operators to minimize future repairs.Completes paperwork associated with repairing equipment, documenting parts usage and accounting for applied times (i.e., work order times compared to time card times).Completes daily consumables report to record hours, fuel and oil usage, and provide information for input into Dossier, Republic Services Fleet Management Software system.Collects and interprets analyses from oil sampling, on-board computer, and fleet management software.Follows all safety policies and procedures.Performs overhauls on gas or diesel engines.QUALIFICATIONS:Advanced knowledge in air brakes, tires, hydraulics, advanced electrical, advanced drive train knowledge, suspension, steering and wheel-end components training as evidenced by ASE Certification.At least 1 year of experience as a technician working on heavy equipment.Minimum of 1 year of prior experience as a technician working on heavy equipment, demonstrating the ability to service increasingly more challenging maintenance repairs.Mechanical Trade School certificate or degreeCertificate in electrical diagnostics.Applicable ASE certifications.Working knowledge of Tier 4 emission systems.Welding and/or fabrication skills and/or experience.MINIMUM REQUIREMENTS:Minimum of 1 year of experience in a technician position requiring knowledge and application of OSHA Haz Com; OSHA Lock Out Tag Out and all OSHA Fire Protection regulations.Rewarding Compensation and BenefitsEligible employees can elect to participate in:• Comprehensive medical benefits coverage, dental plans and vision coverage.• Health care and dependent care spending accounts.• Short- and long-term disability.• Life insurance and accidental death & dismemberment insurance.• Employee and Family Assistance Program (EAP).• Employee discount programs.• Retirement plan with a generous company match.• Employee Stock Purchase Plan (ESPP).The statements used herein are intended to describe the general nature and level of the work being performed by an employee in this position, and are not intended to be construed as an exhaustive list of responsibilities, duties and skills required by an incumbent so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the Company.EEO STATEMENT:Republic Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, disability, protected veteran status, relationship or association with a protected veteran (spouses or other family members), genetic information, or any other characteristic protected by applicable law.ABOUT THE COMPANYRepublic Services, Inc. (NYSE: RSG) is a leader in the environmental services industry. We provide customers with the most complete set of products and services, including recycling, waste, special waste, hazardous waste and field services.Our industry-leading commitments to advance circularity and support decarbonization are helping deliver on our vision to partner with customers to create a more sustainable world.In 2023, Republic’s total company revenue was $14.9 billion, and adjusted EBITDA was $4.4 billion. We serve 13 million customers and operate more than 1,000 locations, including collection and transfer stations, recycling and polymer centers, treatment facilities, and landfills.Although we operate across North America, the collection, recycling, treatment, or disposal of materials is a local business, and the dynamics and opportunities differ in each market we serve. By combining local operational management with standardized business practices, we drive greater operating efficiencies across the company while maintaining day-to-day operational decisions at the local level, closest to the customer.Our customers, including small businesses, major corporations and municipalities, want a partner with the expertise and capabilities to effectively manage their multiple recycling and waste streams. They choose Republic Services because we are committed to exceeding their expectations and helping them achieve their sustainability goals. Our 41,000 team members understand that it's not just what we do that matters, but how we do it.Our company values guide our daily actions:Safe: We protect the livelihoods of our colleagues and communities.Committed to Serve: We go above and beyond to exceed our customers’ expectations.Environmentally Responsible:We take action to improve our environment.Driven: We deliver results in the right way.Human-Centered:We respect the dignity and unique potential of every person.We are proud of our high employee engagement score of 86. We have an inclusive and diverse culture where every voice counts. In addition, our team positively impacted 4.6 million people in 2023 through the Republic Services Charitable Foundation and local community grants. These projects are designed to meet the specific needs of the communities we serve, with a focus on building sustainable neighborhoods. STRATEGYRepublic Services’ strategy is designed to generate profitable growth. Through acquisitions and industry advancements, we safely and sustainably manage our customers’ multiple waste streams through a North American footprint of vertically integrated assets. We focus on three areas of growth to meet the increasing needs of our customers: recycling and waste, environmental solutions and sustainability innovation.With our integrated approach, strengthening our position in one area advances other areas of our business. For example, as we grow volume in recycling and waste, we collect additional material to bolster our circularity capabilities. And as we expand environmental solutions, we drive additional opportunities to provide these services to our existing recycling and waste customers.Recycling and WasteWe continue to expand our recycling and waste business footprint throughout North America through organic growth and targeted acquisitions. The 13 million customers we serve and our more than 5 million pick-ups per day provide us with a distinct advantage. We aggregate materials at scale, unlocking new opportunities for advanced recycling. In addition, we are cross-selling new products and services to better meet our customers’ specific needs.Environmental SolutionsOur comprehensive environmental solutions capabilities help customers safely manage their most technical waste streams. We are expanding both our capabilities and our geographic footprint. We see strong growth opportunities for our offerings, including PFAS remediation, an increasing customer need.SUSTAINABILITY INNOVATIONRepublic’s recent innovations to advance circularity and decarbonization demonstrate our unique ability to leverage sustainability as a platform for growth.The Republic Services Polymer Center is the nation’s first integrated plastics recycling facility. This innovative site processes rigid plastics from our recycling centers, producing recycled materials that promote true bottle-to-bottle circularity. We also formed Blue Polymers, a joint venture with Ravago, to develop facilities that will further process plastic material from our Polymer Centers to help meet the growing demand for sustainable packaging. We are building a network of Polymer Centers and Blue Polymer facilities across North America.We continue to advance decarbonization at our landfills. As demand for renewable energy continues to grow, we have 70 landfill gas-to-energy projects in operation and plan to expand our portfolio to 115 projects by 2028.RECENT RECOGNITIONBarron’s 100 Most Sustainable CompaniesCDP DiscloserDow Jones Sustainability IndicesEthisphere’s World’s Most Ethical CompaniesFortune World’s Most Admired CompaniesGreat Place to WorkSustainability Yearbook S&P Global

Job InfoJob Location: Kansas City, MORoute Type: LocalType of Assignment: Direct HireHours Per Shift: 9 HoursHours Per Week: 45 HoursShift Start Time: 11:00 amWorking Days: Monday, Thursday-SundayTransmission Type: AutomaticJob RequirementsAdditional InformationDiesel Technician | Kansas City, MOJob Type: Full-TimeSchedule: Thursday - Monday 11am - 7:30pmPay Rate: $25 - $30/hr Depending on experienceSign on Bonus: $2,000 paid out within first 90 days on employmentKey Responsibilities:Handle organization and tracking of PO'sOrganize the shop workload for the shop techniciansBe able to order parts for the shopWork well with the Shop Service Manager on leadership tasksDiagnose and repair electrical and mechanical tractor and trailer-related issues using standard testing procedures and computer diagnostic equipmentPerformance preventive maintenance on our fleet of trucks & trailersPerform DOT inspection per FMSCA guidelinesPhysically capable to perform all job duties, which includes being able to lift and/or pull 75 lbs or more without restriction, stand or lie for extended periods, and have flexible movement to reach equipment.Requirements:Must have a valid driver’s license with an acceptable driving recordOwn necessary essential toolsHave a technical or advanced degree or 5+years of equivalent maintenance experienceHave the ability to obtain a Class B licenseASE Certification in 4 areas (preventative maintenance and brakes preferred)Benefits:Sign-On Bonus of $2,000 paid out within the first 90 days of employment401(K) with company matchPTO accrued on day one of employment - estimated 13 days per yearPaid Holidays - 8 days per yearMedical, Dental, RX, Vision, Disability, & Life InsuranceVirtual physical therapy programBoot Allowance ProgramUniform & all safety PPE providedCareer training & development opportunitiesASE Certification reimbursement & assist with study materialsApprenticeship ProgramTo Apply: Apply Now or call Darren ext.648

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Fleet Technician to join our UniFirst community. As a Team Partner in the Maintenance Department, you will be responsible for carrying out all corrective, preventative, and predictive maintenance on fleet vehicles to ensure the safe, efficient, and reliable operation. In addition, you will be responsible for maintaining fleet vehicles in a safe working condition meeting DOT or other regulatory requirements. At UniFirst we have a standard Monday - Friday work week with periodic and weekend overtime. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. Compensation: $25 - $35 hr What’s in it for you Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you’ll be doing: Ensure all assigned vehicles are properly registered and compliant with current plates, inspections, and documentation.Complete all scheduled preventative maintenance to minimize downtime and maintain fleet performance.Perform corrective and predictive maintenance to ensure vehicles are in safe, roadworthy condition and meet DOT and other regulatory standards.Maintain vehicle appearance to align with UniFirst branding and cleanliness standards.Keep the garage clean, organized, and safe; source parts and monitor pricing for cost-effective, high-quality repairs.Accurately track and manage maintenance tasks using a Computerized Maintenance Management System (CMMS).Perform additional tasks as directed by leadership to support overall fleet operations.QualificationsWhat we’re looking for: High school diploma or GED preferred.Must be at least 21 years old.Associate’s degree from an accredited technical school or equivalent experience preferred.Valid driver’s license and clean driving record required.Must meet all DOT regulatory requirements.CDL license is a strong plus, preferred for performing road tests and servicing Class A vehiclesStrong diagnostic skills with GM drivability; diesel experience is a plus.Willingness to work overtime and perform occasional road calls.3 – 5 years of hands-on experience with medium to heavy-duty vehicle repair, including: Preventative Maintenance, tire & wheel service, air & hydraulic brake systems, drivetrain and suspension, electrical and A/C systems computerized diagnostics.Proficiency with diagnostic software and basic computer skillsAbility to lift up to 80 lbs. safely About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 2 billion-dollar organization. UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team.

RESIDENTIAL MAINTENANCE TECHNICIAN-PROPERTY MANAGEMENT Company Vehicle Provided When you join VineBrook Homes, LLC. you join a diverse and growing team of talented professionals who are changing the property management industry. VineBrook is an internally managed real estate company specializing in acquiring, renovating, and leasing single family homes. We take a different approach, focusing on affordability and value for our residents. VineBrook has built a culture of people committed to ensuring a world class resident experience. We are united around a desire for excellence and innovation. Unified by our mission, we are developers, creators, designers, managers, technicians, and most importantly leaders. Each of us is a trailblazer with a tremendous opportunity to have a positive impact on the lives of our valuable residents. Since our commencement in 2007, we have quickly become one of the largest providers of quality rental homes. We are currently seeking a qualified residential Maintenance Technician to perform maintenance on single family homes. Successful candidates will be hard working, reliable, ability to work independently or as a team. We are seeking candidates who desire a long term career opportunity with a successful company in the residential services industry. Position Summary/Objective Service Technicians are responsible for the upkeep and repair of our properties. They must be able to work unsupervised while performing quality repairs to HVAC, electrical, and plumbing systems. They must be able to diagnose and troubleshoot problems. Customer service is of the highest importance and must always be displayed. Other tasks include finish work and occasional property turnover. Documentation is done via smart devices such as smartphones and tablets. Essential Duties and Responsibilities Completes resident service requests or turns in a timely manner, providing outstanding customer experiences to residentsAn average of 5 service requests should be completed per day. Management has discretion depending on the complexity of the job and work ordersAssists with upkeep of all assets to meet Company quality standardsHandles emergency service requests on a rotational basisEnsures all tasks are completed in a timely mannerUses company tools and equipment as directed and in accordance with all required safety standardsCoordinates with assigned personnel and/or other trades for the purpose of completing projects and service requests efficientlyFunctions as part of an interdepartmental teamResponds to emergency situations during after-hours to resolve immediate safety concerns Minimum Qualifications (Knowledge, SKILLS, and Abilities) Strong aptitude with computers, internet, network phone systems Work is performed while standing, sitting and/or walking Requires the ability to communicate effectively using speech, vision, and hearingRequires the ability to lift carry, push, pull medium weights up to 75 pounds Requires activity involving being exposed to moving machinery, exposure to markechanges in temperature and humidity, and exposure to dust, fumes, and gasesTransport a variety of tools, equipment, and supplies for the purpose of ensuring the availability of materials required at the service siteExemplary Customer Service skills High school diploma or equivalent Two to five years’ previous experience in a maintenance role HVAC Certification Preferred At least two years of Carpentry, Plumbing, and Electrical experience Must have own tools, we will provide larger equipment as needed Pass a Motor Vehicle, Drug Screen, Credit, and Criminal Background CheckTime Management skills Valid driver’s license is a requirement Please be aware that a positive test could render you ineligible for hire. This includes positive tests for medical and recreational Marijuana. Candidates from states who have legalized Marijuana for medicinal and recreational use; VineBrook Homes, LLC considers this a positive result for an illegal substance. ADDITIONAL INFORMATION/BENEFITS We offer paid PTO, Health insurance, Life insurance, Supplemental Insurance, Dental and Vision coverage, as well as a 401(k) with matching and paid time offWe are an equal opportunity employer Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Supervisory Responsibility There is no supervisory responsibility with this position. Travel Travel is primarily local during the business day. After hour calls are on rotation. OTHER DUTIES Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. We recognize that people come with a wealth of experience and talent beyond just the technical requirements of the job. If your experience is close to what you see listed here, please still consider applying. Diversity of experience and skills combined with passion is a key to innovation and excellence; therefore, we encourage people from all backgrounds to apply to our positions. Please let us know if you require accommodations during the interview process. We are an equal opportunity employer. Qualified applicants shall be considered for all positions without regard to race, color, sex, religion, national origin, age, disability, veteran status, or any other status protected by federal, state or local law. We are also a Drug Free Work Place. Qualified applicants will also be required to pass a drug screening before receiving an offer or beginning employment. Refusal to submit to testing will result in disqualification of further employment consideration.Licenses & CertificationsPreferredHVAC CertificationEqual Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Overview: At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $28 to $45/hr. and sign-on bonuses up to $3,000 (per location).Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: The HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers, and upright refrigerators & freezers. Qualifications: 3+ years of commercial experience as an HVAC and Refrigeration TechnicianActive EPA CertificationValid driver's licenseExcellent customer relations and interpersonal skillsMechanical aptitude and troubleshooting skillsAbility to safely lift to 50 lbs., climb and balance on a ladder, and work in elevated/high locations. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Entity: Production & OperationsJob Family Group: Operations GroupJob Description: The Electrical & Mechanical Specialist (E&M 1) position provides maintenance work and field operations for BP US Terminal and Pipelines (T&P). The E&M 1 role is a multi-craft position focused on electrical and mechanical duties. This role will primarily be required to perform Operations and Damage Prevention duties. Individual will play a key role protecting our pipeline system from 3rd party damage. This position will be located at our Freeman Station in Freeman, Missouri. This role will be responsible for our BP1 pipeline assets in Cass, Jackson, MO and Miami, KS counties and other pipeline assets as needed. To be considered for employment, candidates must live within a reasonable commuting distance (within 1 hour) to the Freeman Station and their regularly assigned geographical area.Key Accountabilities/Responsibilities:Successfully and effectively follow all health, safety, security, environmental (HSSE) and operational and maintenance practices and procedures.Be motivated and accountable for achieving long-term and day- to-day goals and tasks.Be a self-starter and have the ability to work independently and without supervision.Effectively manage time and resources and ability to manage multiple tasks and responsibilities simultaneously.Exhibit strong interpersonal and organizational skills.Demonstrate and transfer work related knowledge to others.Take initiative to continually develop skills and knowledge which includes additional education and/or training.Solve problems, overcome obstacles, and make good decisions.Work effectively on diverse teams.Good oral/written communication skills and communicate effectively with all levels both internally and externally.Value and practice continuous learning.Demonstrate leadership skills.Exhibit a high level of initiativeWear personal protective equipment (PPE) as needed but not limited to eye/face protection, flame retardant clothing (FRC), foot protection, gloves, hearing protection, head protection, etc.Work nights, weekends, holidays and overtime as necessary and are subject to callouts including response to emergency situations.The successful candidate must complete all training and qualification requirements within the stated timeframe of the BP Pipelines OM/EM Multitasking Training Program.Exhibits safe work practices, including driving both on and off the road.Perform pipeline identification, location and marking lines through the use of electronic locator and probe.Inspect area pipelines on a daily basis for leaks, replace damaged markers and check other irregularities. Inspections are completed both by vehicle and foot.Occasional hand digging, manual probing and walking rough terrain.Checks and records equipment and rectifier readings.Responsible for monitoring and observing excavation activities over/near the pipeline.Acts as a liaison on behalf of BP with Utilities, Municipalities, Property owners, Excavators and other third partiesRecognize third party scope of work and what needs to be done to protect the pipeline.Attend Public Awareness & Education meetings.Monitor and locate notifications for conflicts.Receive and physically check items on aerial report.Maintain equipment in good working condition.Prepare “as-built” drawings of foreign line crossings and other outside construction activities.Complete Inspection & Repair reports, Foreign Line Crossing reports or others as required.Other duties as assigned.Requirements:Minimum of a High School diploma or equivalent.Preferred 3+ years of mechanical or electrical experience or a 2-year technical degree in electrical, electronic instrumentation or equivalent. Additional Competencies & Experience:In accordance with BP’s multiskilling training approach, the below competencies include areas where an employee will receive additional training and workflows they may support on a secondary basis. Prior experience is helpful and preferred, but not strictly required.Ability to read maps, alignment sheets, construction drawings and complete alignment sheets.Underground construction experience and knowledge.Will be working on 2400 volts and belowMaintain, troubleshoot and repair equipment as assigned.Conduct and document DOT equipment inspections.Use MAXIMO, Utilisphere, CBT, MS Office and other applications.Maintain and repair pumps and motors including PD, centrifugal and gear pumping equipment.Verify instrumentation loop circuits.Troubleshoot and repair manual and automatic tank gauging.Maintain and repair electronic-control valves, electrical valve actuators and mechanical valves.Installation and maintenance of multiple equipment associated with petroleum liquids and/or gas terminals and pipeline.Meet all DOT requirements, including Operator Qualifications.Participate in all emergency response training, including Hazwoper, RCRA, respiratory and other as required.Safe and proper procedures, including lock out tag out procedures, to perform normal maintenance for running scrapers in a petroleum system; experience with PLC’s, including programming, installation, maintenance, and repair.Legal authorization to work in the US on a full-time basis for anyone other than current employer.Strong experience in Electrical and Programmable Logic Controller (PLC) programming or pump and motor repair.Computer skills (including MS Office Suites)A valid Driver’s License is required.Driving safety is mandatory at all times and a condition of employment in accordance with BP Pipelines Vehicle Safety Policy.Must be committed to learning new skills and complete the E&M training curriculum required for the assigned job classification level within the outlined timeframe.Ability to acquire a TWIC (Transportation Worker Identification Card) Card if required by local operations.Job Accountability: OvertimeAs a condition of employment, all employees must be available to work overtime as needed. This includes working evenings, weekends, holidays, and responding to callouts, including emergency situations. The ability to work overtime is essential to ensure safe, reliable, compliant, and competitive operations, as well as the timely completion of projects.How much do we pay New hires for this E&M 1 position start at an entry level hourly rate of $41.97, the entry level rate for the E&M classification. The hourly rate incrementally increases to the final E&M 1 rate $55.31 as the employee progresses through and successfully completes the E&M Skills Training curriculum (approximately 36 months from employment start date).Note that the pay range listed for this position is a genuinely expected and reasonable estimate of the range of possible base compensation at the time of posting.At bp, we support our people to learn and grow in a diverse and challenging environment. We believe that our team is strengthened by diversity! We are committed to fostering an inclusive environment in which everyone is respected and treated fairly. We offer benefits to enable your work to fit with your life, including flexible working options and paid parental leave policy, among others.Travel RequirementUp to 10% travel should be expected with this roleRelocation Assistance:Relocation may be negotiable for this roleRemote Type:This position is not available for remote workingSkills:Control of Work, Cost-conscious decision-making, Maintenance general, Procedures and practices, Reliability general, Risk Management, Safety Leadership, Turnaround generalLegal Disclaimer:We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status.Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process,pleasecontact us.If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Company Description: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere.At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown’s history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them.From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward.We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team.Want to Learn More Watch A Day in the Life of a Crown Field Service Technician! click here.Job Posting ExternalJob DutiesTroubleshoot, diagnose and repair Crown and all other makes of lift trucks.Perform all assigned planned maintenance on customer lift trucks.Maintain a service van and its inventory.Process paperwork after completion of each job.Minimum QualificationsLess than 2 years related experienceHigh school diploma or equivalentValid driver's license, good driving record, and ability to safely operate lift trucks.Preferred QualificationsGood mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics.Good written/verbal communication and customer care skills.Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred.Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment.Industry related training is preferredAbility to read and understand service manuals, plan, and follow-throughWork Authorization:Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire.No agency calls please.Compensation and Benefits:Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more.Crown also offers Service Technicians:Award-Winning Service TrainingCompany Vehicle for Field Service TechniciansTool InsuranceNo Flat Rate40 Hours Per Week plus OvertimeUniformsSpecialty ToolsPrimarily 1st ShiftCareer Advancement OpportunitiesEOE Veterans/Disabilities

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Trailer MechanicTrailer Mechanic will perform preventative maintenance on UPS Transportation Trailers and Converter Dollies.? Will properly diagnose and perform necessary repairs to non-power equipment, including air brake systems and electrical systems.? He/She maintains a diverse range of equipment including delivery vehicles, heavy duty machinery, on road tractors, and trailers from a variety of manufacturers. This position troubleshoots and maintains/repairs various systems including hydraulic brakes, air brakes, electronics, and engines. He/She performs other tasks as requested.Ideal candidate will possess the following:Current documented trailer mechanic experienceExperience using diagnostic equipment, scan tools and personal computerPossess a full complement of personal hand toolsResponsibilities & Duties:Meet D.O.T requirementsBend, stoop, squat, kneel, crouch, crawl, climb ladders and stairs, stand, walk, and turn/pivot frequently throughout the duration of the workdayClass A/BCommercial Driver's License (CDL) - PreferredReport to work on a regular and timely basis and complete the scheduled workday on a consistent basisAbility to work varying shifts, additional hours and/or overtime depending on service needsSitting required infrequently throughout the duration of the workdayLift, lower, push, pull, leverage and manipulate equipment and/or packages weighing up to 70 poundsAssist in moving packages or equipment up to 150 poundsSimple hand grasping, power hand grasping, fine hand manipulation, reaching from foot level to above shoulder level as necessary to complete assigned tasksOperate standard/manual transmissionOperate power, pneumatic toolsRequired to wear personal protective equipmentWork in an environment with: variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weatherHave a sufficient ability to communicate, through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $38.78 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

The Maintenance - Mechanic provides advanced mechanical support. Performs a variety of complex technical tasks with mechanical systems.Primary Responsibilities:Performs moderately complex technical functions related to the support of developing engineering activities, such as: Repairing, maintaining, overhauling, modifying, operating and material handling equipment.Installing, dismantling and inspection of electrical, electronic, mechanical, HVAC, and material handling equipment and fixtures.Diagnosing and solving electronic and/or mechanical problems involved in the operation of the system.Recommending modifications to designs as needed.Assists other technicians in the performance of mechanical maintenance activities and/or providing training/guidance.Fabricates mechanical system components, parts and equipment, etc.Isolates malfunctions using established tools and techniques, performs preventive and corrective maintenance on equipment, and returns faulty equipment to operating condition.Logs scheduled inspection reports of the operating equipment, fixed building equipment and building structures, maintenance, repairs and other records and schedules.Actively develops skill blocks to improve personal performance.Core Competencies & Accomplishments:Requires application of special skill, knowledge and pertinent techniques to work assignment.Requires advanced aptitude and experience in various areas of maintenance.Solid understanding of mechanical systems and related components.Requires license to operate mechanical equipment.Advanced knowledge of the principles, methods and techniques used in the fabrication and testing of mechanical components and troubleshooting.Specified license and certifications required.Three years of experience in mechanical field or combination of experience and technical/vocational training.What you get:If eligible, we offer a competitive benefits package including medical/dental/vision, term life insurance, paid vacation/holidays*, and 401(k) with Company match. All associates are eligible for an associate discount on JCPenney merchandise. *For paid vacation days, as well as eligibility requirements for other benefits, please visit About JCPenney:JCPenney is the shopping destination for diverse, working American families. With inclusivity at its core, the Company's product assortment meets customers' everyday needs and helps them commemorate every special occasion with style, quality, and value. JCPenney offers a broad portfolio of fashion, apparel, home, beauty, and jewelry from national and private brands and provides personal services including salon, portrait and optical. The Company and its 50,000 associates worldwide serve customers where, when, and how they want to shop - from jcp.com to more than 650 stores in the U.S. and Puerto Rico. In 2022, JCPenney celebrates 120 years as an iconic American brand by continuing its legacy of connecting with customers through shopping and community engagement. Please visit JCPenney's Newsroom to learn more and follow JCPenney on Facebook, Instagram, Twitter, and LinkedIn.Pay RangeUSD $22.40/Hr -USD $28.00/Hr.

Job InfoJob Location: Weatherby Lake, MORoute Type: LocalType of Assignment: Direct HireHours Per Shift: 8 HoursHours Per Week: 40 HoursShift Start Time: 11:00 amWorking Days: Tue-SatTransmission Type: AutomaticJob RequirementsAdditional InformationCDL A Diesel Mechanics – Join Our Team in Kansas City, MO!Job Type: Full-TimePay Rate: Up to $35.00/hour (DOE)Hey there, Diesel Mechanics!Are you ready to bring your A-game to a thriving team We’re looking for an experienced pro to help keep our fleet in top shape. If you’ve got the skills and passion, we’ve got the opportunity!What You’ll Be Doing:Keeping our shop running smoothly by organizing workloads and tracking POs.Ordering parts and supporting the Shop Service Manager with leadership duties.Diagnosing and fixing electrical and mechanical issues on tractors and trailers.Performing preventive maintenance and DOT inspections following FMCSA standards.Flexing your skills and muscleslifting 75+ lbs and working hands-on with our fleet.What We Need From You:At least 10 years of experience under the hood.A Class A CDL.609, SAE, and welding certifications.Your own toolbox stocked with essential tools.Why Join Us Great payup to $35/hour based on your experience.A team that values your expertise and hard work.Let’s get rolling! Apply NOW or call David at

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible formaintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel andgasolineAutomotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls.Automotive Technicians must be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Automotive Technicians?must possess the required hand tools required to perform the applicable job assignment. ?Responsibilities and DutiesMeets D.O.T requirements required by job assignmentBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required,?throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsRequirementsMust have an active driver’s license issued by the stateMust be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Must possess the required hand tools required to perform the applicable job assignment. ?Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsClass A/Bor A Commercial Driver's License (CDL) - PreferredDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $38.46 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible for maintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel and gasoline. Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls. Responsibilities and Duties Meets D.O.T. requirements required by job assignment Bends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout the workday Sits infrequently, as required,?throughout the workday Exercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasks Operates standard and manual transmission Operates power and pneumatic tools Requirements Must have an active driver’s license issued by the state Must be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday, as well as Tuesday through Saturday schedules, depending on the location’s needs.?? Must possess the required hand tools to perform the applicable job assignment. ? Knowledge and Skills Current documented automotive mechanical experience Experience using diagnostic equipment, scan tools, and personal computer Possesses a full complement of personal hand tools Class A/B or A Commercial Driver's License (CDL) - Preferred Dependable with the ability to report to work on a regular and timely basis and complete the scheduled workday consistently Available to work varying shifts, additional hours, and/or overtime depending on service needs Wears personal protective equipment as required Works in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc. Works cooperatively in a diverse work environment Communicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions Our compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $34.14 per hour. For union-represented postings, wage rates and ranges, and benefit offerings are governed by applicable collective bargaining agreement provisions. Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program. Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.