We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

Flowserve is a world-leading manufacturer and aftermarket service provider of comprehensive flow control systems. Join a company whose people are committed to building a more sustainable future to make the world better for everyone. With 16,000+ employees in 50+ countries, we combine our global reach with local presence. Our team challenges themselves to approach each situation with ingenuity and creativity to help provide our customers with the most innovative flow control products and services. We support 10,000+ customers worldwide, creating products to meet the needs of our customers who are supplying energy, fresh water, pharmaceuticals and other essentials to consumers, businesses and governments globally. We invite you to put your talents and career in motion at Flowserve. Company Overview: If a culture of excellence, innovation and ownership is what you’re searching for, consider putting your experience in motion at Flowserve. As an individual contributor, or as a leader of people, your enterprise mindset will ensure Flowserve’s position as the global standard in comprehensive flow control solutions. Here, your opportunity for professional development and industry leading rewards will be supported by our foundational commitments to the values of people first, integrity and safety. Thinking beyond opportunity and reward, at Flowserve, we are inspired by working together to create extraordinary flow control solutions to make the world better for everyone! Role Summary: Set up and operate a variety of machine tools to produce precision parts and instruments. Includes precision instrument makers who fabricate, modify, or repair mechanical instruments. May also fabricate and modify parts to make or repair machine tools or maintain industrial machines, applying knowledge of mechanics, mathematics, metal properties, layout, and machining procedures. This is a second shift opportunity: Overtime when necessary. Responsibilities & Requirements: Operating CNC Machines or Equipment – Operate basic equipment and machines and carry out routine tasks.Operations Management – Carry out operational tasks by following established processes.Equipment Maintenance and Repair - Help to maintain and repair equipment by carrying out preparations and providing assistance.Health, Safety and Environment – Follow basic mandatory work instructions to safeguard the environment and the wellbeing of oneself and others.Operational Compliance – Follow a straightforward mandatory procedure to ensure that work is carried out to the required quality standards and/or to ensure adherence to external regulatory codes and internal codes of conduct.Precision Equipment Utilization – Interpret and use precision measuring equipment/instruments such as micrometers, dial indicators, and depth gauges.Instructions and Drawings – Ability to read and interpret blueprints and geometric tolerances.Internal Communications – Exchange information with people by having courteous interactions with them.Policy and procedures - Works with guidance to understand policies and procedures, while making sure they match organizational strategies and objectives.Other duties as assigned. Preferred Experience / Skills: Verbal Communication – Uses clear and effective verbal communication skills to express ideas and request actions.Equipment Experience – 2+ years machining experience in a manufacturing or repair environment operating CNC lathes/mills.Planning and Organizing – Works with guidance to plan, organize, and prioritize activities to efficiently meet business objectives.Health and Safety - Applies elementary concepts to manage and apply safe systems of work.HS Diploma / GED and 5-7 years relevant experience Flowserve offers competitive pay, annual bonuses, medical benefits on day 1, generous paid vacation time, paid holidays, 401(k) and many other excellent benefits. Req ID : R-14055 Job Family Group : Operations Job Family : OP Machining EOE including Disability/Protected Veterans. Flowserve will also not discriminate against an applicant or employee for inquiring about, discussing or disclosing their pay or, in certain circumstances, the pay of their co-workers. Pay Transparency Nondiscrimination Provision If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access flowservecareers. com as result of your disability. You can request a reasonable accommodation by sending an email to employment@flowserve. com. In order to quickly respond to your request, please use the words "Accommodation Request" as your subject line of your email. For more information, read the Accessibility Process.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Bank of America, Exelon Corporation, or JP Morgan Chase, among other leading organizations in the Wilmington area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Customer Success - Data Analytics - Investment Operations Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits ! Would you like to work with a company that invests in your growth Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are:As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary.What’s in it for YOU:Competitive Pay Rates! 40 hours a week, not flat rateOT as needed over 40 hoursFull Benefits: Medical, Vision, Dental, and 401K planPaid vacationCompany provided uniformCorporate partner discount programCareer advancement through a national companyDuties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components.Perform scheduled preventative maintenance of vehiclesExecute major and minor repairs of defective components.Document all activities in MV’s Fleet Management System.Maintain work environment in an organized and safe condition Qualifications: Talent Requirements:High school diploma or equivalent.Combination of at least five (5) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program.Must be able to pass a pre-employment drug screen and random drug testing.MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more. Mechanical Maintenance TechnicianPRIMARY PURPOSE OF POSITIONThe position will be within the Mobile Turbine/Rotating Department and is responsible for performing all general mechanical maintenance on power plant equipment. The Mobile Turbine/Rotating team supports a culture of continuous improvement by participating in training, reinforcing standards, reporting, and mitigating unsafe or undesirable conditions, and utilizing the corrective action program. This position regularly requires 80% travel.PRIMARY DUTIES AND ACCOUNTABILITIESPerform maintenance and repair work on plant equipment such as pumps, gearboxes, fans, turbines, bearings, boilers, pipe systems, valves and limit torque operators. (disassembly, part repair or replacement, assembly) using sound technical decisions regarding maintenance on complex mechanical equipmentDemonstrates strong maintenance skill on steam or gas turbines, turbine valves, reactor feed pump turbines (RFPT), terry turbines, various pumps, balance of plan (BOP) equipment in a safe and reliable manor using the correct tools, equipment such as rigging, fork trucks and cranesPerform assigned tasks in a safe and efficient manner at the direction of Maintenance Management.Ability to work on cross-functional teams on major projects while adhering to the conduct of maintenance and established maintenance standards and practicesPerform alignment on Rotating equipment. Perform fitting and welding tasks when qualified.Execute work package when assigned to the level of training received.Use, review and recommend revisions to procedures, prints, technical manuals and other documents as required to the level of training received.Provide technical support to plant operations, maintenance staff and engineering to the level of training received.Interpret and understand power plant prints.Perform verification checks on maintenance items covered in maintenance technician training.MINIMUM QUALIFICATIONSAssociates Degree in Power Plant Technology, Engineering Technology, or Electronics with minimum of 18 months of trade or technical training in Power Plant Technology OR 3 to 5 years' experience in Maintenance Tech I or equivalent years of experience with trade or technical training in Power Plant Technology or relevant field experienceSuccessfully complete the training requirements and time in job requirements for the position including previously passing the MASS testAcquire and maintain unescorted access to Nuclear facilitiesValid driver's license and access to an insured vehicleAbility to lift a minimum of 50 poundsAbility to work in a power plant environment that includes climbing and walking long distancesExposed to heat with reduced stay times, dust, smoke, dirt, high noise areas, confined and cramped work areas, and a nuclear power plant environment including Radiation Dose Exposure.Works at high elevations on ladders and scaffolds.Works shift work or weekends as required. Perform tasks inside radiological controlled areas.Maintains nuclear qualifications IAW EIS Specific training program.Maintain Radiation Protection Qualification and training, including respirator qualificationsAbility to obtain unescorted nuclear plant accessBasic computer skillsGood oral and written communication skillsThis position regularly requires > 80% travel within the nuclear plants PREFERRED QUALIFICATIONSPrevious trade union experience (millwright or pipefitting)Welding qualificationsMachinist experienceHourly rate $32-$54

Securitas Technology Corporationis a division of Securitas AB, the largest protective services provider in the world with over 370,000+ Securitas Heroes across the world.Securitas Technology offers a full portfolio of video, access, intrusion, fire and integrated systems and services. As a leading systems integrator and alarm monitoring company, we deliver the Securitas Technology Difference, serving countless long-term clients with solutions and services that protect their people, customers, and assets.Securitas Technology is seeking technically minded individuals possessing experience with low voltage electronics specializing in electronic security solutions. Our teams are responsible for providing service on SecuritasTechnology products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesRespond to trouble tickets to ensure application uptime and system performance.Work individually and as a team to diagnose and resolve application issues.Execute preventative maintenance tasks to maximize application availability and identify system faults.Perform routine configuration changes (user permissions, application configuration, etc.)Document all system modifications through a digital change control tracking system.Produce quality technical documentation describing the conceptual and quantitative facets of system deployment, intended for both a technical and non-technical audience.Perform pre-deployment end to end testing of all upgrades and major modifications.Perform on site installations of software upgrades and major modifications.Minimum RequirementsHigh School diploma required or equivalent.Familiarity installing and troubleshooting low voltage equipment.Strong working knowledge of commercial access control, CCTV, burglary alarm, intrusion systems, and fire alarmsStrong working knowledge of Microsoft OfficeStrong written and verbal communications skillsWorking knowledge IP addressing equipmentExcellent problem solving and analytical skills.Excellent time management skillsPositive attitude and strong work ethicCertifications in enterprise grade CCTV and Access Control systems a plusSecuritas Technology offers comprehensive benefits including:Highly competitive salaryCompany training and industry leading certification programCompany VehicleCompany Cell PhoneMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Build your best future with the Johnson Controls team!Who We Are:YORK® Chiller Solutions from Johnson Controls, help customers respond to building efficiency needs by providing the widest variety water and air-cooled industrial and commercial chillers on the market. From reducing a facility’s carbon footprint, to delivering a healthier indoor environment and cutting energy costs, we build smaller, more energy efficient chillers tailored to fit almost any comfort or process cooling application – even heating. This role will be based in the Johnson Controls Advanced Development Engineering Center (JADEC) in New Freedom, PA. Candidates must be located within a commutable distance from the facility or be willing to relocate. Get excited!...take a look at where you'll work. Johnson Controls Advanced Development and Engineering Center (JADEC)What We Offer:Competitive salaryHybrid work opportunity (upon the completion of training)Paid vacation/holidays/sick timeComprehensive benefits package including 401K, medical, dental, and vision care– available day one!On the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat You Will Do:This position is within the water-cooled chiller product engineering team. We are seeking a senior engineer to work on chiller PLC control solutions for both new product and chiller retrofit opportunities. The role would focus on both software and hardware solutions for chiller PLC products. As Senior Engineer within our Chillers product development team, you will be responsible for electrical analysis, detailed design, and control, as well as overall electrical performance of sophisticated water-cooled chillers components and systems, including providing support to manufacturing and applications engineering. In this role you will work on control systems for new industrial chiller applications as well as retrofits, hardware design, design test and sustain control panels and system wiring.How You Will Do It:Develop and maintain electronic hardware and software (temperature sensors, pressure sensors, flow sensors, and A-B software).Design of analog and digital interface circuits, development of power supply circuits and/or selection of power supplies.Perform the worst-case circuit analysis and incorporation of appropriate reliability principles to ensure reliable operation over the environmental specifications.Assist chiller team to develop, test and support chiller system controls (This includes selection of system components and accurate interfacing of them to electronic control panel I/O). Acquire agency approvals such as UL, CE and FCC on Printed Circuit boards and Electronic Panels.Independently conduct and apply costing analysis to feasibility studies on proposed designs or modifications to existing designs.Develop schedules which accurately reflect the project breakthroughs and implement to them.Integrate new and modify existing processes to cover all phases of the electronic development process.Provide mentorship and support to:Drafters and DesignersService and Field TechniciansManufacturing on Commercial Systems products.Provide mentorship to drafters and support Service and Manufacturing on Commercial Systems products.Prepares and participates in design reviews.Learns and applies regulatory codes such as UL, NEC, CSA, and CE codes.Proficient at capturing and analyzing test data to identify electrical performance problems and propose solutions for corrections.What We Look For:RequiredBSEE,BSEET, BSEMET,or related fieldPreferred candidate to have 5 years of valid experience with one or more of the following.PLC programming and troubleshooting.HVAC systems and controls.Automation control systems.Electrical systems, wiring diagrams, and troubleshooting (24VDC, 120VAC, & 240VAC).Ability to work in a fast-paced, schedule driven, team-oriented environment.Ability to program and debug PLC programs.Ability to identify obsolete parts for PLCs, HMIs, Network switches and protocol translators for customer upgrades.Provides secondary level product support to the field after product technical support resources are exhausted for PLC applications.Experience with Allen Bradley PLCs and Rockwell software (rslinx, FactoryTalk, Studio 5000, Activation Manager, etc.).Good verbal and written communication skills are required.Must be willing and able to travel domestically and internationally as required (up to 10% of time).PreferredUnderstands chiller controls.Familiarity with HVAC Systems and motor driven mechanical engineering design and test, alternative experience with gas compression would be advantageous.Chiller PLC experience.#Hybrid#ElectricalEngineer

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $35 - $45 hourly depending on experience.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: ResponsibilitiesThe HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers, and upright refrigerators & freezers. Qualifications: Qualifications5+ years of commercial experience as an HVAC and Refrigeration TechnicianRack experience a plusEMS Controller experienceActive EPA CertificationValid driver's licenseExcellent customer relations and interpersonal skillsMechanical aptitude and troubleshooting skillsAbility to safely lift up to 50 lbs., climb and balance on a ladder, and work in elevated/high locations. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

MAINTENANCE TECHNICIAN Baltimore, MD LEVINDALE HOSPITAL PLANT OPERATIONS Full-time - Evening shift - 3:00pm-11:30pm Support Services/Security/Trade 89400 $17.46-$27.29 Experience based Posted:YesterdayApply NowSave JobSaved SummaryJOB SUMMARY:Performs routine scheduled and unscheduled maintenancePosition is on the evening shift but trainingis on the day shift (up to a month)JOB REQUIREMENTS:HS Diiploma/GED preferred1 to 3 years of commercial/hospital maintenance experienceOn call rotation (weekends included in on call rotation) Every 5 to 6 weeks when fully staffed. Must be available for unexpected emergenicesHoliday rotation (at least one holiday per year)Position is on the evening shift but trainingis on the day shift (up to a month)MD driver's license and good driving record preferredAdditional InformationAs one of the largest health care providers in Maryland, with 13,000 team members, We strive to CARE BRAVELY for over 1 million patients annually. LifeBridge Healthincludes Sinai Hospital of Baltimore, Northwest Hospital, Carroll Hospital, Levindale Hebrew Geriatric Center and Hospital and Grace Medical Center, as well as our Community Physician Enterprise, Center for Hope, Practice Dynamics, and business partners: LifeBridge Health & Fitness, ExpressCare and HomeCare of Maryland. Share:Apply Now

Cargill’s size and scale allows us to make a positive impact in the world. Our purpose is to nourish the world in a safe, responsible and sustainable way.We are a family company providing food, ingredients, agricultural solutions and industrial products that are vital for living. We connect farmers with markets so they can prosper. We connect customers with ingredients so they can make meals people love. And we connect families with daily essentials from eggs to edible oils, salt to skincare, feed to alternative fuel. Our 160,000 colleagues, operating in 70 countries, make essential products that touch billions of lives each day. Join us and reach your higher purpose at Cargill.Job Purpose and ImpactThe Maintenance Supervisor will coordinate the deployment of leading maintenance practices in alignment with production needs. In this role, you will supervise a team which executes a variety of medium complex activities to maintain capacity utilization and quality standards for reliable operations in the region.Key AccountabilitiesCoordinate the execution of specific equipment strategy for each asset involved with containing, controlling or safeguarding a high hazard process.Implement methodologies to improve operational effectiveness in compliance with regulatory codes and standards.Assist to lead the integration of contractor partners and equipment providing support to the plant force.Partner with regional and global leadership to support area leading practices.Develop the operational related budget to track the area progress against the estimate.You will have some authority for personnel decisions related to hiring, performance, or disciplinary actions, and much of your time is spent completing the same tasks as the subordinate employees.Other duties as assigned#LI-CF1 #fgb #themuseQualificationsMinimum QualificationsBachelor’s degree in a related field or equivalent experienceMinimum one year of directly related work experiencePreferred QualificationsKnowledge of related tools, processes controls and area technology systemsExperience coordinating third party resources to deliver business resultsOne year of supervisory experienceExperience in managing budgetsTraining in structured problem solvingExperience with servant leadership modelPosition InformationThis position is located in White Marsh, MarylandRelocation assistance will be provided for this position.Equal Opportunity Employer, including Disability/Vet.

Job Summary: Operate and maintain press to production standards and quality. Set-up, adjust and operate equipment to print and fold signatures, ensuring expectations of customer specifications. Duties/Responsibilities: Review job jackets and plan work process to ensure meeting of customer specifications Monitor assigned press machine during run to ensure adherence to specificationsPerforming quick and efficient make-readies, product size changeover and folder changeoversPerform preventative maintenance and troubleshoot machine problems, resolving if possible, notifying GPS or Print Process Manager as neededProvide training, as required, to Assistant in machine operation and safetyComplete and maintain all required paperwork, job jackets, records, documents, timekeeping, etc. Follow all required safety procedures such as: PPE’s, Ergonomics, and etc. Performs job in a manner that protects the health and safety of all employees. Assist with housekeeping in the Press areaOther duties as assigned Basic Qualifications: High School Diploma or GEDStrong math and mechanical skills.Ability to effectively communicate with other employees Desired Skills and Abilities: Previous Press experience is preferredKnowledge of a variety of small hand tools and precision measuring devices is preferred Physical Requirements Ability to frequently transport and position materials weighing up to 65 pounds CJK Group is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. #SPA24

Description Unleash Your PotentialAt Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customer’s success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.If this sounds like an environment where you can thrive, keep reading!We are in search of a Senior Network Installation Technician at the customer site at Fort Meade, MD and will require travel.Our Opportunity:The Defense Enclave Services contract will unify the DOD Fourth Estate Defense Agencies and Field Activities’ common use information technology systems, personnel, functions and program elements under the direction of DISA’s Fourth Estate Network Optimization program office. This technician will support a large federal agency’s Network Infrastructure through survey, design, and deployment of structured networks and will be responsible for the upkeep of the security posture of the environment. This is accomplished through projects such as new installations, life cycle replacement projects, Cable Plant and wireless installations that are compliant with commercial, TEMPEST, and NIST standards.Clearance Requirement:•Must hold an active Top Secret security clearance and be able to obtain a TS/SCI. (US Citizenship required)Key Responsibilities:•Lead network survey, design and installations under direction of the government.•Conduct Site Surveys of customer premise networks in CONUS and OCONUS locations.•Create detailed Site Survey reports detailing a site’s current infrastructure, NIST and TEMPEST compliance, along with design recommendations.•Configure, install, test, certify, and troubleshoot network infrastructure cabling.•Ensure Network cabling infrastructure is compliant with current NIST and TEMPEST Standards.•Build and install equipment racks.•Install, dress, label, and terminate Cat6 and Fiber cable in telecommunications rooms.•Test and troubleshoot network infrastructure issues on SIPR and NIPR networks.•Create accurate reports and documentation to design/certify network infrastructure.•Track, manage, and ensure project tasks are completed in a timely manner.•Develop Bills of Material (BOM) for network plant design requirements.•Plan and perform preventive maintenance and scheduled upgrades (Life-cycle replacements)•Investigate physical faults in the network.•Report network infrastructure deployment status to key stakeholders.•Have flexible working hours to be available to support off hour work, when needed.Must have’s:•Bachelor’s degree and 4 years of relevant experience; additional years of experience may be substituted in lieu of a degree.•Understanding of ANSI/TIA-568 and 569 standards.•Requirements of Protective Distribution Systems (PDS) for Classified Systems as directed by Security and/or the Certified Tempest Technical Authority (CTTA).•Knowledge of National Security Telecommunication & Information Systems Security Instruction (NTISSI) 7003.•Knowledge of DISA network topologies and standards.•Topology and rack elevations using Visio.•Experience with various OTDR, cable testers, and network sniffers to develop reports for infrastructure certification documentation.Nice to have’s:•BICSI certification.•Sec+ certification.DISADESExternal Referral EligibleOriginal Posting:April 9, 2025For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $72,150.00 - $130,425.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Featuredjob

Shift - Tuesday thru Friday 5 AM - 3 PM, OT as neededWhat this job involves - The Maintenance Mechanic - 2 is involved in the performing both preventative maintenance and corrective maintenance on multiple plumbing and piping systems. This position requires a high level of technical expertise with a variety of building infrastructure. Involved in campus' repairs, protects and beautifies various interior and exterior surfaces and various components of the physical structure of building in client facility providing painting and Carpentry work. Technician will be performing both preventative maintenance and corrective maintenance on multiple interior and exterior surfaces. The position may be called upon to perform other general maintenance and support duties on an as-needed basis.What is the day to day Assist Instrumentation and controls tech in troubleshoot and correcting deficienciesInvolved in performing repairs, P.M. and install new piping and valves relating to building steam and water piping/plumbing systems; determine frequency of repair and/or P.M. of systemsRequires the ability to analyze the operation of various systems, determine the cause of any problems/malfunctions and take corrective action as requiredUnderstands the engineering design and operational aspects of the building and critical support systems and components. Must be able to immediately recognize system shortcomings, troubleshoot and respond to operational and emergency situationsMonitors operation and maintains heating and cooling valves, water cooling equipment; boilers, heating and hot water equipment; pumps, valves, piping and filtersPosition will be called upon to review logs to ensure proper operation of equipment; responsible for reporting any problems/malfunctions on an as need basisChecks malfunctioning equipment and ascertains corrective action required to restore to satisfactory operating conditionInstall, operate, maintain, troubleshoot and repair machinery and mechanical equipment such as pumps, fans, and rotating equipmentPerform rigging/moving of equipmentSupport the maintenance, repair and operation of site rotating equipment including but not limited to HVAC equipmentOccasionally support the repair plumbing components including toilets, urinals, lavatories, flush valves, water fountains, sinks, drains, water heaters, piping, and sump pumpsProvide all other building maintenance, repair, and restorative procedures as directedAssist the operations team in the maintenance and repair of building and equipmentMachine room and area inspectionsRespond to urgent requests as directedEnsure that work is performed efficiently with a minimum amount of disruption and inconvenience. Track completion rate and outstanding work orders. Drive team efficiency and provide oversight and support as neededPrioritize all PM’s, corrective and emergent work orders for the site (annual, monthly, weekly, and daily). Schedule and assign work to individuals with the assistance of the work order scheduler/plannerMaintains a clean and safe working environment. Identifies and remediates all Environmental Health and Safety (EHS) issues as they ariseWork with the client to schedule equipment to be taken off line so that preventative maintenance can be performed with minimal impact to the end users.Confers/communicates with work order requestorsCoordinates with client representatives to understand their needs and ensure the work scheduled takes into account the operational windows for repairDesired experience and technical skills - Required4+ years of experience in commercial or industrial facilities maintenanceHVAC certification (Journeyman or Apprentice)EPA Universal CertificationExposure to piping/plumbing systems, mechanical systems, and boiler controls/operation.Excellent written and oral communication skills.Able to work in a customer service environment interacting with the client.Able to stay on task and work independently with minimal direction and supervision.Manages competing priorities well.Ability to analyze and make decisions based on broad range of data.Proficient in basic computer application software such as MS Office, Outlook, CMMS (Maximo), etc.PreferredExperience in controlled working environments, a plus.Physical Work EnvironmentAble to adequately perform required job functions.Able to lift, bend, and move in such a way as to perform job tasks in a safe and approved manner.Able to operate required hand/power tools, test instrumentation and equipment required by this trade in a safe and approved manner.Able to lift 50lbOverhead work / working at heights required#MMjobs

*Wednesday-Saturday 8pm-6am *About the RoleAs a Maintenance Technician, you will promote workplace efficiency and profitability by maintaining, inspecting and repairing facilities, equipment and machinery. What You’ll DoDaily inspection and repair of all conveyor systems and equipmentRoutine inspection, preventative maintenance and maintenance of air compressors, generators, compactors, bailers, conveyors and power and material handling equipmentPerform inspection and repair of fire protection equipmentParts administrationPerform minor electrical and plumbing repairs, painting and office furniture movesPerform routine maintenance on heating and air conditioning unitsMaintain lighting throughout the facilitySort, stack and load pallets, cardboard, aluminum, steel and light bulbs for recyclingAssist outside contractors in performing various dutiesPromptly answer calls for jams, malfunctions or other maintenance-related issuesWhat Skills You HaveRequiredBasic knowledge of mechanical, electrical, plumbing and HVAC equipmentCompliance with all MSDS standards and lock-out/tag proceduresAbility to climb ladders and run all power equipmentAbility to work with minimal supervisionMust provide own basic set of toolsAbility to use cleaning and disinfecting solutions, oil and equipment according to MSDS procedurePay Range: $24.20 - $38.70Kohl’s offers a variety of benefits to associates depending on full-time/part-time status and work hours, including: WORK LIFE BALANCE (PTO, Vacation Buy Program, Parental Leave), HEALTH & WELLNESS (Medical, Dental, Vision and other short and long term disability programs, Emergency health and wellness programs such as Accident Protection Plans, Critical Illness Plans and more), SAVINGS & RETIREMENT BENEFITS (401k, Flexible Spending Accounts and associate discount programs with Kohl’s partners), INSURANCE PROGRAMS (Life Insurance for you, your family or your pet, as well as other protection programs), and LIFE EVENTS (Legal and adoption assistance benefits).

The pay range per hour is $36.50 - $40.50Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .Job DescriptionEngineering & Facilities (MT2)About job:Tuition ReimbursementBenefits eligible within two weeks of employmentCurrently hiring for below shifts:L2 Key - Wednesday - Saturday from 2:30pm - 12:30am ($1.50 shift differential)L3 Key - Wednesday - Saturday from 10:00pm - 8:00am ($2.50 shift differential) About us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 2 (MT2), you will assist in the installation, maintenance, and repair of automated material handling equipment and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target service technicians to solve problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, and meet aggressive time lines. You will collaborate with Maintenance Technician 3s and Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You may also assist in training other maintenance technicians and technician trainees to enhance their technical skills and job knowledge. A successful candidate in this role will:Maintain and troubleshoot all electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Adjust scanners, cameras, field buses, scales and printer applicatorsReset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsMaintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Assist with basic electronics/ Programmable Logic Controls troubleshootingConduct maintenance and basic troubleshooting of all types of industrial robotsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies[F&B Only:] Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Core responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licensePC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuring[F&B Only:] Comfortable working in a temperature-controlled environmentExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresBasic blueprint and schematic readingElectrical and electronic principlesBasic metal fabrication and weldingIndustrial Controls and ElectronicsAbility to troubleshoot basic Input/Output functionsProgrammable Logic Control (PLC) programsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with robotic operation/ maintenanceAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Bank of America, Exelon Corporation, or JP Morgan Chase, among other leading organizations in the Wilmington area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Customer Success - Data Analytics - Investment Operations Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.

Securitas Technology Corporationis a division of Securitas AB, the largest protective services provider in the world with over 370,000+ Securitas Heroes across the world.Securitas Technology offers a full portfolio of video, access, intrusion, fire and integrated systems and services. As a leading systems integrator and alarm monitoring company, we deliver the Securitas Technology Difference, serving countless long-term clients with solutions and services that protect their people, customers, and assets.Securitas Technology is seeking technically minded individuals possessing experience with low voltage electronics specializing in electronic security solutions. Our teams are responsible for providing service on SecuritasTechnology products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesRespond to trouble tickets to ensure application uptime and system performance.Work individually and as a team to diagnose and resolve application issues.Execute preventative maintenance tasks to maximize application availability and identify system faults.Perform routine configuration changes (user permissions, application configuration, etc.)Document all system modifications through a digital change control tracking system.Produce quality technical documentation describing the conceptual and quantitative facets of system deployment, intended for both a technical and non-technical audience.Perform pre-deployment end to end testing of all upgrades and major modifications.Perform on site installations of software upgrades and major modifications.Minimum RequirementsHigh School diploma required or equivalent.Familiarity installing and troubleshooting low voltage equipment.Strong working knowledge of commercial access control, CCTV, burglary alarm, intrusion systems, and fire alarmsStrong working knowledge of Microsoft OfficeStrong written and verbal communications skillsWorking knowledge IP addressing equipmentExcellent problem solving and analytical skills.Excellent time management skillsPositive attitude and strong work ethicCertifications in enterprise grade CCTV and Access Control systems a plusSecuritas Technology offers comprehensive benefits including:Highly competitive salaryCompany training and industry leading certification programCompany VehicleCompany Cell PhoneMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Additional Job Info: This position offers a base hourly range of $19.73 - $34.62 per hour, depending on experience and qualifications, plus bonus based on company performance.One of the MANY work perkz at Sheetz is quarterly employee bonuses based on company performance! And there’s more – A LOT more like competitive salaries, PTO and parental leave, 401k match and employee stock ownership, limitless professional development and growth opportunities, tuition reimbursement, full medical, vision and dental coverage, and snack discounts! Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

***Consideration given to applicants residing within a commutable distance to New Freedom, PA or willing to relocate***What You Will Do:Our Test Engineer will oversee product testing throughout the test life cycle. This includes designing, planning, execution, and preliminary analysis of results. The Test Engineer must possess and/or have the ability to develop a working knowledge of HVAC/R equipment and its application and has experience with component or system testing, test procedure development, mechanical fluid or airflow system design, troubleshooting, and operation. our Test Engineers are required to execute the testing for individual test subjects in order to successfully and efficiently complete testing for the product area customer. In this role you will conceive, develop, and evaluate plans for solving complex testing challenges. The ideal candidate will have technical aptitude in HVAC. This position is not eligible for Visa sponsorship.How You Will Do It:Provide technical communications for Test Engineering to product customer(s).Plan and execute tests of chillers and components. This may include:Participate in the development of and/or receive and review test specifications from customer group; seek out and acquire needs from other areas/disciplines who may wish to benefit from testing a particular subject.Use input from the customer group(s) to facilitate test plans and identify resource (human, physical) requirements.Meet with product engineering, product management, product technical support, or equivalent groups to agree upon and issue test plans.Work within the Test Engineering team to schedule tests and required resources with regards to capacity limitation.Provide oversight and input to Test Technicians for set up of data acquisition software configurations.Work with labor, test support, and engineering resources to actively manage the test from set up to completion. This includes daily monitoring and planning, communication, direct data acquisition, review of data acquired, provide engineering analysis of data acquired, problem resolution, and other activities necessary in order to efficiently perform and complete testing in a timely fashion.Maintain a proficiency in understanding chiller test data to guide the customer engineering teams as necessary to acceptance or assist in explanation of data results.Drive the evaluation and creation of standard procedures, test standards, and processes using applicable engineering tools. This includes, but is not limited to LEAN, 6-Sigma, Value Stream Mapping, Design of Experiments (DOE), 5S, Gemba, Kaizen (continuous improvement), KPI analysis and development, PDCA (Plan, Do, Check, Act), and Root Cause Analysis.Use experience to develop new procedures, processes, and resources as necessary to provide more efficient, accurate, and advanced testing services for product customers.What We Look For:BS required in an engineering or engineering adjacent discipline.Preferred combination education and experience, three (3) years direct work experience in the following: HVAC/R equipment development, servicing or testing, good understanding of HVAC/R systems, concepts, and diagnostics.Ability to perform test data acquisition and data analysis, test troubleshooting and diagnostics, technical reporting, and related communication at various levels is required.Experienced in environments ranging from laboratory, manufacturing/testing facilities, and field sites.Able to work in fast-paced, schedule driven work environment and possess the agility/adaptability to quickly move from one task to another when required. Must be self-motivated.Strong communication skills; willing to confront issues in an open, efficient, and tactful manner.Strong group communication and presentation skills.Demonstrated use of engineering tools and concepts within a manufacturing or testing facility.Good computer and data analysis/management skills with proficiency in Microsoft Suite Applications (Word, Excel, Access, and PowerPoint) as well as internet software and e-mail.Preferred:Familiarity in one or more technical and operational disciplines within HVAC platform development.Background in engineering or development testing.#TestEngineer#Hiring

MAINTENANCE MECH-UNION Baltimore, MD SINAI HOSPITAL MAINTENANCE Full-time - Day shift - 7:00am-3:30pm Support Services/Security/Trade 89116 $17.50-$17.50 Posted:April 25, 2025Apply NowSave JobSaved SummaryJJoin a team that values collaboration, respect and growth. Facilities plays a crucial role in ensuring the safety and efficiency of the hospital, making a difference in patient care every day. Join a system that offers competitive benefits, retirement, recognition program, vacation and holiday pay as well as free parking.JOB SUMMARY:This position is responsible for general facility, building and equipment maintenance and repair, both scheduled and unscheduled tasks, as assigned by the Call Center and/or Facilities and Maintenance management. In general, tasks that will be completed include: Work Order completion, Preventative Maintenance completion, problem identification and resolution, determination of material and supplies required for problem resolution, documentation of activities, utilization of the Computer Maintenance Management System, and communicating with the department’s managementREQUIREMENTS:High School Diploma, GED equivalent or High School certificate preferred.Minimum of one year of maintenance experience required.Preference will be given to candidates with experience in healthcare or commercialsettings.Union rate $17.50 per hourAdditional InformationAs one of the largest health care providers in Maryland, with 13,000 team members, We strive toCARE BRAVELYfor over 1 million patients annually. LifeBridge Healthincludes Sinai Hospital of Baltimore, Northwest Hospital, Carroll Hospital, Levindale Hebrew Geriatric Center and Hospital and Grace Medical Center, as well as our Community Physician Enterprise, Center for Hope, Practice Dynamics, and business partners: LifeBridge Health & Fitness, ExpressCare and HomeCare of Maryland. Share:Apply Now

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.*****This Engineering role can be filled at the Mid-level to Senior Staff Engineer level. Please see minimum qualifications list below for each level*****Expected salary range:Mid-Level - $88,000 - $108,000Sr Level - $115,000- $141,000Sr Staff - $138,000 - 154,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K. PRIMARY PURPOSE OF POSITIONResponsible for performing engineering and technical tasks, under general supervision, in support of nuclear plant operations.PRIMARY DUTIES AND ACCOUNTABILITIESPerform engineering and technical tasks as assigned by supervision applying general engineering principles.Assure all engineering products prepared are in accordance with applicable safety analyses, industry codes, engineering specifications and all regulatory requirements.Participate in the development and implementation of effective processes and techniques at appropriate levels of detail and in compliance with established policies and procedures.Recommend format and methodology improvements to standard processes and procedures.MINIMUM QUALIFICATIONS for Mid-level E02 Engineer B.S. in Engineering and 2+ years Nuclear or related engineering experienceMINIMUM QUALIFICATIONS for Senior E03 EngineerB.S. in Engineering or Licensed Professional Engineer and 5+ years engineering experienceMINIMUM QUALIFICATIONS for Senior Staff E04 EngineerB.S. in Engineering or Licensed Professional Engineer and 10+ years engineering experience PREFERRED QUALIFICATIONSEngineer in training certificationGood grasp of techniques and a good understanding of the fundamental functions performed by the group. As responsibility increases within the organization.

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation:Competitive pay from$25-$45 per hour DOE. Sign on Bonus: up to $3,000.00 DOEOngoing Education & Training:Access to state-of-the-art facilities and paid online training.Comprehensive Benefits:Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work:Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks:Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time.Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectationsProvides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner.Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base.Test malfunctioning systems and components using electrical and/or mechanical skills.Maintain legible corporate and personal records of work history.Provides department support by processing job tickets, and work orders to the necessary department promptly.Provide support by picking up, delivering, and installing cases.Perform work on minor construction and remodeling projects including startups of new installations.Drives company vehicle in a safe manner.Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED.EPA certification.Certification from an accredited vocational-technical or trade school is a plus!Minimum 5+ years of commercial refrigeration experience required.Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus.Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.Must have a good driving record and be able to work independently.Emergency on-call availability is a basic requirement.Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Securitas Technology Corporationis a division of Securitas AB, the largest protective services provider in the world with over 370,000+ Securitas Heroes across the world.Securitas Technology offers a full portfolio of video, access, intrusion, fire and integrated systems and services. As a leading systems integrator and alarm monitoring company, we deliver the Securitas Technology Difference, serving countless long-term clients with solutions and services that protect their people, customers, and assets.Securitas Technology is seeking technically minded individuals possessing experience with low voltage electronics specializing in electronic security solutions. Our teams are responsible for providing service on SecuritasTechnology products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesRespond to trouble tickets to ensure application uptime and system performance.Work individually and as a team to diagnose and resolve application issues.Execute preventative maintenance tasks to maximize application availability and identify system faults.Perform routine configuration changes (user permissions, application configuration, etc.)Document all system modifications through a digital change control tracking system.Produce quality technical documentation describing the conceptual and quantitative facets of system deployment, intended for both a technical and non-technical audience.Perform pre-deployment end to end testing of all upgrades and major modifications.Perform on site installations of software upgrades and major modifications.Minimum RequirementsHigh School diploma required or equivalent.Familiarity installing and troubleshooting low voltage equipment.Strong working knowledge of commercial access control, CCTV, burglary alarm, intrusion systems, and fire alarmsStrong working knowledge of Microsoft OfficeStrong written and verbal communications skillsWorking knowledge IP addressing equipmentExcellent problem solving and analytical skills.Excellent time management skillsPositive attitude and strong work ethicCertifications in enterprise grade CCTV and Access Control systems a plusSecuritas Technology offers comprehensive benefits including:Highly competitive salaryCompany training and industry leading certification programCompany VehicleCompany Cell PhoneMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

MASTER MECHANIC Randallstown, MD NORTHWEST HOSPITAL MAINTENANCE Full-time - Day shift - 7:00am-3:30pm Support Services/Security/Trade 89281 $17.50-$36.57 Experience based Posted:April 25, 2025Apply NowSave JobSaved SummaryJoin a group of seasoned, supportive teammates in a clean and well maintained plant! Other benefits include regular infrastructure investment, robustrecognition program and team building events in a fun department!JOB SUMMARY:Under limited Supervision, installs, repairs, and maintains all physical elements of the institution to ensure a continued safe environment for all residents, staff and visitorsJOB REQUIREMENTS:Basic professional knowledge; equivalent to a Bachelor's degree; working knowledge of theory and practice within a specialized fieldFive years experience as a P.M. mechanic, maintenance mechanic, or three years experience in a mechanical trade such as H.V.A.C., pipefitting, engineering5-7 years experienceRotating weekly on call and weekend coverage every 7 to 8 weeks.Additional InformationAs one of the largest health care providers in Maryland, with 13,000 team members, We strive to CARE BRAVELYfor over 1 million patients annually. LifeBridge Healthincludes Sinai Hospital of Baltimore, Northwest Hospital, Carroll Hospital, Levindale Hebrew Geriatric Center and Hospital and Grace Medical Center, as well as our Community Physician Enterprise, Center for Hope, Practice Dynamics, and business partners: LifeBridge Health & Fitness, ExpressCare and HomeCare of Maryland. Share:Apply Now

Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our full spectrum of best-in-class services includes HVAC & refrigeration installations, remodels, service & maintenance; and energy solutions, including controls and lighting. CoolSys serves customers in the retail, commercial, food service, educational, healthcare, and industrial markets. Headquartered in Southern California, CoolSys has more than 2,000 highly trained, field-based service and installation experts, serving more than 45,000 customer locations across North America daily. WHAT WE OFFER We are a large company serving many unique customers – because of this, we provide job stability and long-term opportunity for career growth. We invest in our technicians by offering:Competitive pay from $25 - $35 depending on experience.Ongoing Education & TrainingExposure to a Large Variety of ProjectsIndustry-leading Benefit PackagesAdvanced support and tools designed to improve your workflow Responsibilities: The HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers, and upright refrigerators & freezers. Qualifications: 3+ years of commercial experience as a HVAC and Refrigeration TechnicianRack experience a plusExperience servicing kitchen hot side equipment and ice machines preferred.Active EPA Universal CertificationValid driver's licenseExcellent customer relations and interpersonal skillsMechanical aptitude and troubleshooting skillsAbility to safely lift up to 50 lbs., climb and balance on a ladder, and work in elevated/high locations. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Securitas Healthcare, part of Securitas, empowers caregivers to deliver connected, productive and safe care. Its innovative portfolio of healthcare solutions helps over 15,000 hospitals, clinics and senior living organizations worldwide protect people, use assets efficiently and understand their operations for a caring and healing environment. For more information, visitwww.securitashealthcare.comPosition SummaryThe employee will be remote and live in the Baltimore, MD or Washington DC vicinity primarily supporting the Eastern region of the US with flight travel to other locations as needed. Will drive or fly to customer locations to provide on-site installation and support to clients using Securitas Healthcare products. Will be responsible for installing low voltage systems that are used in long-term care healthcare facilities. Understanding of network connectivity and software configuration troubleshooting will also be necessary. Will be required to provide training on products to end-users as needed. Essential Job FunctionsRepresent and support the Company in the field, through pre-sale site surveys, equipment installations, repair or replacement, and customer training, according to Company schedules, procedures, and standards.Install, configure, and commission new systems by following company procedures and processesPerform service work at customer sites including troubleshooting, repair, or replacement of customer equipmentVisit facilities to perform preventative maintenance by inspecting installed equipment and making repairs as neededComplete facility site surveys to determine usability for products manufactured and/or sold by the CompanyProvide training to facility personnel to show the correct operation and maintenance of installed equipmentPerform administrative duties including writing facility visit reports, completing service or post-installation checklists, creating and submitting expense reports, and maintaining accurate inventory of equipment and parts on a company vehicleAttend construction meetings when needed to help ensure that installations that are part of a new construction or renovation project go as plannedParticipate in an on-call rotation to help cover for emergency repairs on weekends or holidaysThis is a customer-facing role. The candidate must have strong customer service skills in order to clearly communicate with the customer and colleagues in the field and at the office in order to ensure that customers are satisfied following each project.Must have time management skills in order to arrive at sites when planned and to finish all work in the time allotted for each project. Knowledge of use and basic configuration or troubleshooting of PC systems requiredMust be able to use hand tools and operate basic handheld power toolsMust be able and willing to work alone and stay in contact with the office as scheduling requirements changeMust be ableto lift up to 75 pounds in some instancesMust be able to climb and stand on ladders for extended periods of timeRequired to stand in and crawl through tight spaces occasionally under extreme temperatures (attics, crawl spaces, utility access, etc.). Crawl space access may be as small as 16”Must have the ability to travel extensively, overnight, on a regular basis (up to 100% of the time)Other duties as assignedRequired QualificationsHigh School Diploma or GEDValid Driver's License with no restrictions2+ years of experience with installing or troubleshooting low voltage systems including security systems, access control systems, door controllers, elevator controllers, relays, etc.Ability to obtain required State licensing needed to successfully perform the rolePreferred QualificationsHold VA DCJS license and MD Security Systems Technician licenseAn associate degree in Electronics or a related fieldWiring, cabling, and/or security or access control system installationField service experience traveling to multiple customer job sitesSome experience in customer training preferredExperience supporting or installing systems that use radio technologyExperience with data networkingWe are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment