FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Overview: SimVentions, consistently voted one of Virginia's Best Places to Work, is looking for an experienced Software Developer to develop weapon system control software based in Java. This position is located on-site at our Dahlgren office in King George, VA with some limited hybrid potential, after initial onboarding period. Travel: None Clearance: An ACTIVE Secret Clearance is required for this position. Applicants selected will be subject to a security investigation and may need to meet eligibility requirements for access to classified information. US Citizenship is required to obtain a clearance. Requirements: Minimum of 5 years of experience conducting coding with C++, Kotlin, Java, and other related/similar softwareMinimum of 3 years of experience with DoD research and development programsKnowledge of hardware architectures, microcontrollers and communication protocolsKnowledge of writing test cases, unit testing and validation of hardware software integrationKnowledge of the TCP/IP protocol suite, including network stack integration and socket programmingKnowledge in diagnosing and resolving network-related issues, including network configuration, connectivity, and data transmission problemsKnowledge of Weapon Systems and Command & Control SystemsWorking on base at NSWCDD 2-3 days per week Responsibilities: Develop software for existing control systemsSupport testing and assessment of embedded systems locally and at external locationsUtilize software development best practices within government development processesIdentify and incorporate the latest hardware, technology, and techniques in this rapidly evolving environmentRoutinely collaborate with the government team through regularly scheduled meetings onsite Preferred Skills and Experience: Attention to details and following established processesExcellent oral and written communication skills Education: A Bachelor of Science (BS) degree from an accredited college or university in an engineering, scientific, or technical discipline is preferred but not required. Compensation: Compensation at SimVentions is determined by a number of factors, including, but not limited to, the candidate’s experience, education, training, security clearance, work location, skills, knowledge, and competencies, as well as alignment with our corporate compensation plan and contract specific requirements.The projected annual compensation range for this position is $92,000.00 - $135,000 (USD). This estimate reflects the standard salary range for this position and is just one component of the total compensation package that SimVentions offers. Benefits: At SimVentions, we’re committed to supporting the total well-being of our employees and their families. Our benefit offerings include comprehensive health and welfare plans to serve a variety of needs.We offer:Medical, dental, vision, and prescription drug coverageEmployee Stock Ownership Plan (ESOP)Competitive 401(k) programsRetirement and Financial CounselorsHealth Savings and Health Reimbursement AccountsFlexible Spending AccountsLife insurance, short- & long-term disabilityContinuing Education AssistancePaid Time Off, Paid Holidays, Paid Leave (e.g., Maternity, Paternity, Jury Duty, Bereavement, Military)Third Party Employee Assistance Program that offers emotional and lifestyle well-being services, to include free counselingSupplemental Benefit Program Why Work for SimVentions : SimVentions is about more than just being a place to work with other growth-orientated technically exceptional experts. It’s also a fun place to work. Our family-friendly atmosphere encourages our employee-owners to imagine, create, explore, discover, and do great things together.Support Our WarfightersSimVentions is a proud supporter of the U.S. military, and we take pride in our ability to provide relevant, game-changing solutions to our armed men and women around the world.Drive Customer SuccessWe deliver innovative products and solutions that go beyond the expected. This means you can expect to work with a team that will allow you to grow, have a voice, and make an impact.Get Involved in Giving BackWe believe a well-rounded company starts with well-rounded employees, which is why we offer diverse service opportunities for our team throughout the year.Build Innovative TechnologySimVentions takes pride in its innovative and cutting-edge technology, so you can be sure that whatever project you work on, you will be having a direct impact on our customer’s success.Work with Brilliant PeopleWe don’t just hire the smartest people; we seek experienced, creative individuals who are passionate about their work and thrive in our unique culture.Create Meaningful SolutionsWe are trusted partners with our customers and are provided challenging and meaningful requirements to help them solve.Employees who join SimVentions will enjoy additional perks like:Employee Ownership:Work with the best and help build YOUR company!Family focus:Work for a team that recognizes the importance of family time.Culture:Add to our culture of technical excellence and collaboration.Dress code:Business casual, we like to be comfortable while we work.Resources: Excellent facilities, tools, and training opportunities to grow in your field.Open communication:Work in an environment where your voice matters.Corporate Fellowship: Opportunities to participate in company sports teams and employee-led interest groups for personal and professional development.Employee Appreciation:Multiple corporate events throughout the year, including Holiday Events, Company Picnic, Imagineering Day, and more.Founding Partner of the FredNats Baseball team:Equitable distribution of tickets for every home game to be enjoyed by our employee-owners and their families from our private suite.Food:We have a lot of food around here!FTAC

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits ! Would you like to work with a company that invests in your growth Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are:As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary.What’s in it for YOU:Competitive Pay Rates! 40 hours a week, not flat rateOT as needed over 40 hoursFull Benefits: Medical, Vision, Dental, and 401K planPaid vacationCompany provided uniformCorporate partner discount programCareer advancement through a national companyDuties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components.Perform scheduled preventative maintenance of vehiclesExecute major and minor repairs of defective components.Document all activities in MV’s Fleet Management System.Maintain work environment in an organized and safe condition Qualifications: Talent Requirements:High school diploma or equivalent.Combination of at least five (5) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program.Must be able to pass a pre-employment drug screen and random drug testing.MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

The Branch Fleet Technician will be responsible for maintaining diesel equipment and hydrovac operation by performing inspections, preventive maintenance, and necessary adjustments and alignments. Corrects vehicle deficiencies and keeps accurate records with guidance and direction. Manages work orders in Fleetio to ensure comprehensive documentation and tracking. This role is crucial for ensuring the reliability and efficiency of diesel equipment, ultimately supporting the overall operational success of the organization.Salary: $38.00 per hour and up based on experience with many opportunities for pay increases and career advancement!What You'll Be Doing:•Performs inspection, diagnosis and repair of assigned vehicles and equipment and preventative maintenance such as oil changes and greasing of trucks.•Conducts safety checks on trucks.•Maintains a clear line of communication to the Branch Manager and Regional Fleet Staff and other staff in the maintenance department.•Keeps the Hydrovac Fleet operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance.•Updates job knowledge by participating in educational opportunities; reading technical and regulation publications.•Occasionally may perform service calls for emergency breakdowns.•Maintains a clean, safe work area in compliance with Corporate/OSHA Standards and performs all work in accordance with established procedures.What We're Looking For:•Education: High School Diploma.•Licensed Heavy Duty Technician.•Driver’s License required; Class B CDL license is preferred.•Demands include frequent sitting, standing, walking, stooping, kneeling, bending, lifting, and reaching. Employees must also crawl under vehicles, climb ladders, work in tight spaces, stand or kneel on cement floors, and regularly lift or move heavy objects such as tires, rims, and brake drums.•Regularly required to lift or move objects weighing 25 to 50 lbs, with moderate grasping, lifting, pushing, and pulling of these objects.•Work may require more than 40 hours per week.What You'll Need For Success:•Some knowledge with electronic diagnostics.•Experience with Peterbilt and Western Star chassis a plus.•Experience with troubleshooting Hydrovac equipment a plus.•Knowledge of DOT compliance, laws, rules, regulations, and safety is helpful.•Computer literate: Fleetio (our fleet services technology,) Microsoft, Outlook, and Excel.•Will be required to provide your own standard tools; all specialty tools will be provided.If you feel you don't have the experience listed above, but still think you are qualified for the job, we encourage you to apply for consideration.What You'll Get In Return:•Generous weekly pay and overtime opportunities•Low-cost Medical, Dental, and Vision Insurance•Retirement Plan with Employer Matching Contributions•Attractive Vacation Programs•Inclusive Group Life Insurance•Supportive Employee Assistance Program (EAP) that allows for covered behavioral health visits•Rewarding Employee Referral Program•Valuable Employee Training Program(s)#BDGRJobsHPBadger Infrastructure Solutions is the industry leader in non­-destructive hydro-excavation (hydrovac) services. Since 1992, Badger has been innovating cutting-edge technology and providing services to a diverse customer base, including oil and gas, energy, industrial, construction, transportation and other markets, as well as numerous government agencies within Canada and the United States. We Hire great people from a wide array of backgrounds, not because it is the right thing to do, but because it makes Badger stronger. There has never been a better time to join the Badger team.

ManTechseeks a motivated, career and customer-oriented Enterprise IT Support Officers (EITSO) – Complex Projects Network Installer to join our team inMcLean, VA. In this role, serve on a team of IT support professionals responsible for installing network equipment while providing a productive and collaborative computer workspace (new or renovated) to support dynamic mission requirements.Responsibilities include, but are not limited to: Supporting all facets of network installations, which includes the physical placement of CAT5 and fiber optic cable, wall jacks, racks, and communications equipment as required.Installing, pulling and terminating cable, determining and implementing required pin outs, cards power supplies, testing and documenting installations, dressing and labeling cables, racks, patch panels, etc.Supporting projects that include cabling and implementation in accordance with design documents and build-to packages.Local travel may be required between customer buildings or temporary assignment to an alternate location in support of special projects.Member of a team comprised of a variety of skills that provide coverage from 6:00 a.m. – 6:00 p.m. with flexibility to support 24x7 operations; may need to work extended hours during critical peaks and be available to meet last minute requests.Minimum Qualifications:Bachelor’s Degree and 4+ years of experiences, or a combination of education and work experience equivalent to 8+ years.Excellent knowledge of various cabling methodologies, industry standards, troubleshooting techniques, and reading/understanding cable run lists.Experience with installing endpoints including but not limited to desktop IT equipment, printers, VOIP and digital phones, network switches.Experience resolving technical problems and answering queries by that involve computer hardware, network, and telecommunications systems.Preferred Qualifications: Related work experience in IT hardware and cabling installation.Experience with implementation on the Sponsor's network LAN infrastructure.Ability to adapt to quickly changing tasks and requirements and the ability to quickly learn new skills while on the job.Clearance Requirements:Must have a current/active TS/SCI with Polygraph.Physical Requirements: Must be able to remain in a stationary position at least 25% of the time. Constantly operate a computer, phone, and other office equipment for extended periods of time.Must be able to move/traverse within and between buildings and offices majority of the time, position self to maintain equipment and cabling, including under the desks, while moving floor tiles, and in server closets, some of which may be confined spaces.Must be able to move Audio/Visual or Computer equipment weighing 50+ pounds, some equipment may require team-lift or the use of carts. Ascends/descends a ladder, 10+ feet high while pulling cables and adjusting equipment.

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more. Mechanical Maintenance TechnicianPRIMARY PURPOSE OF POSITIONThe position will be within the Mobile Turbine/Rotating Department and is responsible for performing all general mechanical maintenance on power plant equipment. The Mobile Turbine/Rotating team supports a culture of continuous improvement by participating in training, reinforcing standards, reporting, and mitigating unsafe or undesirable conditions, and utilizing the corrective action program. This position regularly requires 80% travel.PRIMARY DUTIES AND ACCOUNTABILITIESPerform maintenance and repair work on plant equipment such as pumps, gearboxes, fans, turbines, bearings, boilers, pipe systems, valves and limit torque operators. (disassembly, part repair or replacement, assembly) using sound technical decisions regarding maintenance on complex mechanical equipmentDemonstrates strong maintenance skill on steam or gas turbines, turbine valves, reactor feed pump turbines (RFPT), terry turbines, various pumps, balance of plan (BOP) equipment in a safe and reliable manor using the correct tools, equipment such as rigging, fork trucks and cranesPerform assigned tasks in a safe and efficient manner at the direction of Maintenance Management.Ability to work on cross-functional teams on major projects while adhering to the conduct of maintenance and established maintenance standards and practicesPerform alignment on Rotating equipment. Perform fitting and welding tasks when qualified.Execute work package when assigned to the level of training received.Use, review and recommend revisions to procedures, prints, technical manuals and other documents as required to the level of training received.Provide technical support to plant operations, maintenance staff and engineering to the level of training received.Interpret and understand power plant prints.Perform verification checks on maintenance items covered in maintenance technician training.MINIMUM QUALIFICATIONSAssociates Degree in Power Plant Technology, Engineering Technology, or Electronics with minimum of 18 months of trade or technical training in Power Plant Technology OR 3 to 5 years' experience in Maintenance Tech I or equivalent years of experience with trade or technical training in Power Plant Technology or relevant field experienceSuccessfully complete the training requirements and time in job requirements for the position including previously passing the MASS testAcquire and maintain unescorted access to Nuclear facilitiesValid driver's license and access to an insured vehicleAbility to lift a minimum of 50 poundsAbility to work in a power plant environment that includes climbing and walking long distancesExposed to heat with reduced stay times, dust, smoke, dirt, high noise areas, confined and cramped work areas, and a nuclear power plant environment including Radiation Dose Exposure.Works at high elevations on ladders and scaffolds.Works shift work or weekends as required. Perform tasks inside radiological controlled areas.Maintains nuclear qualifications IAW EIS Specific training program.Maintain Radiation Protection Qualification and training, including respirator qualificationsAbility to obtain unescorted nuclear plant accessBasic computer skillsGood oral and written communication skillsThis position regularly requires > 80% travel within the nuclear plants PREFERRED QUALIFICATIONSPrevious trade union experience (millwright or pipefitting)Welding qualificationsMachinist experienceHourly rate $32-$54

Additional Job Info: This position offers a base hourly range of $19.73 - $34.62 per hour, depending on experience and qualifications, plus bonus based on company performance.One of the MANY work perkz at Sheetz is quarterly employee bonuses based on company performance! And there’s more – A LOT more like competitive salaries, PTO and parental leave, 401k match and employee stock ownership, limitless professional development and growth opportunities, tuition reimbursement, full medical, vision and dental coverage, and snack discounts! Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Cargill’s size and scale allows us to make a positive impact in the world. Our purpose is to nourish the world in a safe, responsible and sustainable way.We are a family company providing food, ingredients, agricultural solutions and industrial products that are vital for living. We connect farmers with markets so they can prosper. We connect customers with ingredients so they can make meals people love. And we connect families with daily essentials from eggs to edible oils, salt to skincare, feed to alternative fuel. Our 160,000 colleagues, operating in 70 countries, make essential products that touch billions of lives each day. Join us and reach your higher purpose at Cargill.Job Purpose and ImpactThe Maintenance Supervisor will coordinate the deployment of leading maintenance practices in alignment with production needs. In this role, you will supervise a team which executes a variety of medium complex activities to maintain capacity utilization and quality standards for reliable operations in the region.Key AccountabilitiesCoordinate the execution of specific equipment strategy for each asset involved with containing, controlling or safeguarding a high hazard process.Implement methodologies to improve operational effectiveness in compliance with regulatory codes and standards.Assist to lead the integration of contractor partners and equipment providing support to the plant force.Partner with regional and global leadership to support area leading practices.Develop the operational related budget to track the area progress against the estimate.You will have some authority for personnel decisions related to hiring, performance, or disciplinary actions, and much of your time is spent completing the same tasks as the subordinate employees.Other duties as assigned#LI-CF1 #fgb #themuseQualificationsMinimum QualificationsBachelor’s degree in a related field or equivalent experienceMinimum one year of directly related work experiencePreferred QualificationsKnowledge of related tools, processes controls and area technology systemsExperience coordinating third party resources to deliver business resultsOne year of supervisory experienceExperience in managing budgetsTraining in structured problem solvingExperience with servant leadership modelPosition InformationThis position is located in White Marsh, MarylandRelocation assistance will be provided for this position.Equal Opportunity Employer, including Disability/Vet.

MAINTENANCE TECHNICIAN Baltimore, MD LEVINDALE HOSPITAL PLANT OPERATIONS Full-time - Evening shift - 3:00pm-11:30pm Support Services/Security/Trade 89400 $17.46-$27.29 Experience based Posted:May 6, 2025Apply NowSave JobSaved SummaryJOB SUMMARY:Performs routine scheduled and unscheduled maintenancePosition is on the evening shift but trainingis on the day shift (up to a month)JOB REQUIREMENTS:HS Diiploma/GED preferred1 to 3 years of commercial/hospital maintenance experienceOn call rotation (weekends included in on call rotation) Every 5 to 6 weeks when fully staffed. Must be available for unexpected emergenicesHoliday rotation (at least one holiday per year)Position is on the evening shift but trainingis on the day shift (up to a month)MD driver's license and good driving record preferredAdditional InformationAs one of the largest health care providers in Maryland, with 13,000 team members, We strive to CARE BRAVELY for over 1 million patients annually. LifeBridge Healthincludes Sinai Hospital of Baltimore, Northwest Hospital, Carroll Hospital, Levindale Hebrew Geriatric Center and Hospital and Grace Medical Center, as well as our Community Physician Enterprise, Center for Hope, Practice Dynamics, and business partners: LifeBridge Health & Fitness, ExpressCare and HomeCare of Maryland. Share:Apply Now

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Bank of America or JPMorgan Chase among other leading organizations in the Baltimore area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Business Operations - Project Management - Banking - Customer Success - IT Support - Data Analytics Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.

Overview: Orthodontic Assistant **$2,500 Sign on Bonus Offered** Pine Dentistry and Braces - District Heights, MD location Full Time: Monday - Friday 8:45am - 5:00 pm Orthodontic Assistant Certification Required Competitive Pay Full Benefits Work for a company that is truly making the world a happier place, one smile at a time! At Benevis, we create over a million smiles a year in the communities we serve and believe that every person deserves access to quality, affordable dental care. This mission drives everything we do. With over 3000 employees in offices across the country from clinical to support staff - we are united in our mission to create happy, healthy smiles through providing high quality dental care in a fun, compassionate environment. Are you ready to join us in creating our next million smiles We have JUST the opportunity for you.We are actively seeking an Orthodontic Assistant to join our team. Support our mission to providing excellent dental care in the community and help us create more smiles and memorable experiences. Join a team that believes in teamwork and truly cares about their patients. Responsibilities: Deliver quality and compassionate care to every patient Guide parents and patients through our processes before treatment Educate patients in oral hygiene instruction and provide postoperative instruction Prepare patient for examination and treatment Take x-rays and save to patient charts Take quality orthodontic facial photos Responsible for the operational readiness Prepare tray set-ups for dental procedures Mix amalgam, cement, pulp paste and prepare impression materials Sterilize and disinfect instruments and equipment Clean chairs and rooms Assist professional dental staff with treatment Document patient information, treatment plans, and procedures in patient chart Pour, trim and polish impression casts Fabricate custom impression trays Perform to the highest integrity by adhering to all government regulations, company standards, and company compliance programs Other duties as assigned Qualifications: Orthodontic or Dental Assistant Certification (State dependent) Preferred at least 1 year of experience in Orthodontic Assisting Willing to travel in territory assigned to team High focus on customer service and satisfaction Must love working with children Compassion and high level of service for our patients, parents and staff Integrity, always doing the right thing Dependable, reliable to be at work when scheduled Attention to detail Able to organize work, engage in a variety of tasks simultaneously and consistently meet deadlines Professional manner and appearance at all times We Offer: Competitive compensation Quarterly bonuses based on Office performance Comprehensive Benefits Package: Medical, Dental, Vision, 401K with match, flexible spending accounts, paid time off, company holidays and much more! We value teamwork, mutual respect and cooperation. We do not practice unlawful discrimination, including harassment or tolerate it in our workplace. What do we mean by discrimination We mean that we do not discriminate on the basis of race, color, creed, religion, sex, national origin, age, citizenship, disability, sexual orientation or any other characteristic protected by federal, state, or local law.

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $25 - $38 depending on experience.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time.Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectationsProvides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner.Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base.Test malfunctioning systems and components using electrical and/or mechanical skills.Maintain legible corporate and personal records of work history.Provides department support by processing job tickets, and work orders to the necessary department promptly.Provide support by picking up, delivering, and installing cases.Perform work on minor construction and remodeling projects including startups of new installations.Drives company vehicle in a safe manner.Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED.EPA certification.Certification from an accredited vocational-technical or trade school is a plus!Minimum 5+ years of commercial refrigeration experience required.Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus.Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.Must have a good driving record and be able to work independently.Emergency on-call availability is a basic requirement.Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Description Unleash Your PotentialAt Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customer’s success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.If this sounds like an environment where you can thrive, keep reading!We are in search of a Senior Network Installation Technician at the customer site at Fort Meade, MD and will require travel.Our Opportunity:The Defense Enclave Services contract will unify the DOD Fourth Estate Defense Agencies and Field Activities’ common use information technology systems, personnel, functions and program elements under the direction of DISA’s Fourth Estate Network Optimization program office. This technician will support a large federal agency’s Network Infrastructure through survey, design, and deployment of structured networks and will be responsible for the upkeep of the security posture of the environment. This is accomplished through projects such as new installations, life cycle replacement projects, Cable Plant and wireless installations that are compliant with commercial, TEMPEST, and NIST standards.Clearance Requirement:•Must hold an active Top Secret security clearance and be able to obtain a TS/SCI. (US Citizenship required)Key Responsibilities:•Lead network survey, design and installations under direction of the government.•Conduct Site Surveys of customer premise networks in CONUS and OCONUS locations.•Create detailed Site Survey reports detailing a site’s current infrastructure, NIST and TEMPEST compliance, along with design recommendations.•Configure, install, test, certify, and troubleshoot network infrastructure cabling.•Ensure Network cabling infrastructure is compliant with current NIST and TEMPEST Standards.•Build and install equipment racks.•Install, dress, label, and terminate Cat6 and Fiber cable in telecommunications rooms.•Test and troubleshoot network infrastructure issues on SIPR and NIPR networks.•Create accurate reports and documentation to design/certify network infrastructure.•Track, manage, and ensure project tasks are completed in a timely manner.•Develop Bills of Material (BOM) for network plant design requirements.•Plan and perform preventive maintenance and scheduled upgrades (Life-cycle replacements)•Investigate physical faults in the network.•Report network infrastructure deployment status to key stakeholders.•Have flexible working hours to be available to support off hour work, when needed.Must have’s:•Bachelor’s degree and 4 years of relevant experience; additional years of experience may be substituted in lieu of a degree.•Understanding of ANSI/TIA-568 and 569 standards.•Requirements of Protective Distribution Systems (PDS) for Classified Systems as directed by Security and/or the Certified Tempest Technical Authority (CTTA).•Knowledge of National Security Telecommunication & Information Systems Security Instruction (NTISSI) 7003.•Knowledge of DISA network topologies and standards.•Topology and rack elevations using Visio.•Experience with various OTDR, cable testers, and network sniffers to develop reports for infrastructure certification documentation.Nice to have’s:•BICSI certification.•Sec+ certification.DISADESExternal Referral EligibleOriginal Posting:April 9, 2025For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $72,150.00 - $130,425.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Featuredjob

Overview: Hogan & Sons Tire and Auto- We are a multi-generational family business that provides a full-service solution for all of your automotive and repair needs. These can range from tire replacement and inspections to maintenance packages.The Senior Automotive Technician / Mechanicis responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturer’s and company standards.COMPENSATION: Up to $45 Flat Rate + $1,500 Sign-On BonusAutomotive Technician / Mechanic Benefits:Competitive Bi-Weekly PayTuition Reimbursement, up to $3,000 annuallyPaid Vacation and Sick Time6 Paid HolidaysMedical, Dental and Vision InsuranceHealth/Flexible Spending AccountEmployee Assistance ProgramTelemedicine ProgramSupplemental Critical Illness, Hospital and Accident PlansLife Insurance (Company paid)Short/Long Term DisabilityHealth Savings and Flexible Spending Account401(k) Retirement Savings Plan with Company MatchDiscounted Services on Personal and Immediate Family VehiclesOpportunity for Advancement!!!Principal Duties and Responsibilities:Diagnoses vehicles according to the appropriate level of certifications/experience.Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy.Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers.Recommends services that are necessary to keep the customer’s vehicle in running condition; properly documents all recommendations in customer file.Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager.Maintains appropriate ASE certifications and renewals of expiring certifications.Qualifications:High School Diploma or equivalentPrefer a minimum of one active ASE or equivalent experience or trainingPossess valid driver’s license, or obtain a valid Virginia driver’s license within 30 days of hire dateAbility to work a minimum of five days, including SaturdaysSun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Shift - Tuesday thru Friday 5 AM - 3 PM, OT as neededWhat this job involves - The Maintenance Mechanic - 2 is involved in the performing both preventative maintenance and corrective maintenance on multiple plumbing and piping systems. This position requires a high level of technical expertise with a variety of building infrastructure. Involved in campus' repairs, protects and beautifies various interior and exterior surfaces and various components of the physical structure of building in client facility providing painting and Carpentry work. Technician will be performing both preventative maintenance and corrective maintenance on multiple interior and exterior surfaces. The position may be called upon to perform other general maintenance and support duties on an as-needed basis.What is the day to day Assist Instrumentation and controls tech in troubleshoot and correcting deficienciesInvolved in performing repairs, P.M. and install new piping and valves relating to building steam and water piping/plumbing systems; determine frequency of repair and/or P.M. of systemsRequires the ability to analyze the operation of various systems, determine the cause of any problems/malfunctions and take corrective action as requiredUnderstands the engineering design and operational aspects of the building and critical support systems and components. Must be able to immediately recognize system shortcomings, troubleshoot and respond to operational and emergency situationsMonitors operation and maintains heating and cooling valves, water cooling equipment; boilers, heating and hot water equipment; pumps, valves, piping and filtersPosition will be called upon to review logs to ensure proper operation of equipment; responsible for reporting any problems/malfunctions on an as need basisChecks malfunctioning equipment and ascertains corrective action required to restore to satisfactory operating conditionInstall, operate, maintain, troubleshoot and repair machinery and mechanical equipment such as pumps, fans, and rotating equipmentPerform rigging/moving of equipmentSupport the maintenance, repair and operation of site rotating equipment including but not limited to HVAC equipmentOccasionally support the repair plumbing components including toilets, urinals, lavatories, flush valves, water fountains, sinks, drains, water heaters, piping, and sump pumpsProvide all other building maintenance, repair, and restorative procedures as directedAssist the operations team in the maintenance and repair of building and equipmentMachine room and area inspectionsRespond to urgent requests as directedEnsure that work is performed efficiently with a minimum amount of disruption and inconvenience. Track completion rate and outstanding work orders. Drive team efficiency and provide oversight and support as neededPrioritize all PM’s, corrective and emergent work orders for the site (annual, monthly, weekly, and daily). Schedule and assign work to individuals with the assistance of the work order scheduler/plannerMaintains a clean and safe working environment. Identifies and remediates all Environmental Health and Safety (EHS) issues as they ariseWork with the client to schedule equipment to be taken off line so that preventative maintenance can be performed with minimal impact to the end users.Confers/communicates with work order requestorsCoordinates with client representatives to understand their needs and ensure the work scheduled takes into account the operational windows for repairDesired experience and technical skills - Required4+ years of experience in commercial or industrial facilities maintenanceHVAC certification (Journeyman or Apprentice)EPA Universal CertificationExposure to piping/plumbing systems, mechanical systems, and boiler controls/operation.Excellent written and oral communication skills.Able to work in a customer service environment interacting with the client.Able to stay on task and work independently with minimal direction and supervision.Manages competing priorities well.Ability to analyze and make decisions based on broad range of data.Proficient in basic computer application software such as MS Office, Outlook, CMMS (Maximo), etc.PreferredExperience in controlled working environments, a plus.Physical Work EnvironmentAble to adequately perform required job functions.Able to lift, bend, and move in such a way as to perform job tasks in a safe and approved manner.Able to operate required hand/power tools, test instrumentation and equipment required by this trade in a safe and approved manner.Able to lift 50lbOverhead work / working at heights required#MMjobs

*Wednesday-Saturday 8pm-6am *About the RoleAs a Maintenance Technician, you will promote workplace efficiency and profitability by maintaining, inspecting and repairing facilities, equipment and machinery. What You’ll DoDaily inspection and repair of all conveyor systems and equipmentRoutine inspection, preventative maintenance and maintenance of air compressors, generators, compactors, bailers, conveyors and power and material handling equipmentPerform inspection and repair of fire protection equipmentParts administrationPerform minor electrical and plumbing repairs, painting and office furniture movesPerform routine maintenance on heating and air conditioning unitsMaintain lighting throughout the facilitySort, stack and load pallets, cardboard, aluminum, steel and light bulbs for recyclingAssist outside contractors in performing various dutiesPromptly answer calls for jams, malfunctions or other maintenance-related issuesWhat Skills You HaveRequiredBasic knowledge of mechanical, electrical, plumbing and HVAC equipmentCompliance with all MSDS standards and lock-out/tag proceduresAbility to climb ladders and run all power equipmentAbility to work with minimal supervisionMust provide own basic set of toolsAbility to use cleaning and disinfecting solutions, oil and equipment according to MSDS procedurePay Range: $24.20 - $38.70Kohl’s offers a variety of benefits to associates depending on full-time/part-time status and work hours, including: WORK LIFE BALANCE (PTO, Vacation Buy Program, Parental Leave), HEALTH & WELLNESS (Medical, Dental, Vision and other short and long term disability programs, Emergency health and wellness programs such as Accident Protection Plans, Critical Illness Plans and more), SAVINGS & RETIREMENT BENEFITS (401k, Flexible Spending Accounts and associate discount programs with Kohl’s partners), INSURANCE PROGRAMS (Life Insurance for you, your family or your pet, as well as other protection programs), and LIFE EVENTS (Legal and adoption assistance benefits).

The pay range per hour is $45.50 - $54.33Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .About job:Currently hiring for below shifts:B3: 9pm-7am Tue-Friup to $2.50 shift differential based on KeyBenefits eligible within two weeks of employmentAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 3 (MT3), you will be a key technical subject matter expert that ensures high equipment availability rates. You will use preventive and predictive maintenance processes, rapidly troubleshoot equipment breakdowns, and quickly restore equipment to service. You will work with other Target maintenance technicians to solve difficult problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, handle multiple projects, and work with a sense of urgency. You will collaborate with others to perform Root Cause Analysis for equipment failures, and fix systemic issues using careful observation and diagnostic tools. You will have an expert understanding of system controls logic and troubleshooting techniques. As the technical subject matter expert on a shift, you will also act as a technical trainer, sharing your knowledge with maintenance technicians and technician trainees to enhance their technical skills and job knowledge.An individual in this role will:Maintain and troubleshoot electrical/mechanical aspects of Material Handling Equipment (MHE), including conveyors, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Control and adjust positioning accuracy and timingControl and adjust scanners, cameras, scales and printer applicatorsControl, reset, repair or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentInstall, maintain, and troubleshoot relay logic, ladder diagrams, and control components-- photo eyes, motor starters, relays, limit switches, proximity sensors, timers, solenoids, Servo drives, frequency inverters, linear drives, tachometers and encodersTroubleshoot PLC programs, components (CPU back plains, I/O boards, counters, modules, and devices), field buses (ASI, Profibus, DeviceNet, etc.), and communications modules (Ethernet). Configure and adjust PLC parameters and component setupConduct maintenance and higher level troubleshooting of any robot typeTroubleshoot power distribution systems, branch circuits, lighting systems, transformers, and wiring methods and materials, up to 480VDevelop work plans with peer technicians for emergency repair of critical assetsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies, as neededNavigate ladders and gangways safely and work off platforms and equipment at significant heightsWork effectively in varied conditions, temperatures, and environmentsFrequently monitor all aspects of the internal and external worksite, which may include standing/walking for up to 10-12 hoursLift and/or move product or items up to 49 pounds[F&B Only:] Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Core responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Possess or ability to obtain a valid driver’s licenseExcellent PC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuring[F&B Only:] Comfortable working in a temperature-controlled environmentExperience with the following areas:Preventive/predictive maintenance proceduresBlueprint and schematic readingWork order managementIndustrial Electrical, Controls and ElectronicsProgrammable Logic Control (PLC) programsNational Electrical Code (NEC) and Material Handling Equipment (MHE) safety standardsAutomated material handling equipment or robotic maintenanceDesired:Degree from a technical or community college, or accredited industrial maintenance certifications (PLCs, Industrial Networks, Machine Logic, Robotics), with a focus in the Mechanical/Electrical fields4+ years of experience in the Mechanical or Electrical maintenance fieldBenefits EligibilityPlease paste this url into your preferred browser to learn about benefits eligibility for this role: https://tgt.biz/BenefitsForYou_C | Pegue esta URL en su navegador preferido para obtener información sobre la elegibilidad de este puesto para recibir beneficios: https://tgt.biz/BenefitsForYou_CAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

MASTER MECHANIC Randallstown, MD NORTHWEST HOSPITAL MAINTENANCE Full-time - Day shift - 7:00am-3:30pm Support Services/Security/Trade 89281 $17.50-$36.57 Experience based Posted:April 25, 2025Apply NowSave JobSaved SummaryJoin a group of seasoned, supportive teammates in a clean and well maintained plant! Other benefits include regular infrastructure investment, robustrecognition program and team building events in a fun department!JOB SUMMARY:Under limited Supervision, installs, repairs, and maintains all physical elements of the institution to ensure a continued safe environment for all residents, staff and visitorsJOB REQUIREMENTS:Basic professional knowledge; equivalent to a Bachelor's degree; working knowledge of theory and practice within a specialized fieldFive years experience as a P.M. mechanic, maintenance mechanic, or three years experience in a mechanical trade such as H.V.A.C., pipefitting, engineering5-7 years experienceRotating weekly on call and weekend coverage every 7 to 8 weeks.Additional InformationAs one of the largest health care providers in Maryland, with 13,000 team members, We strive to CARE BRAVELYfor over 1 million patients annually. LifeBridge Healthincludes Sinai Hospital of Baltimore, Northwest Hospital, Carroll Hospital, Levindale Hebrew Geriatric Center and Hospital and Grace Medical Center, as well as our Community Physician Enterprise, Center for Hope, Practice Dynamics, and business partners: LifeBridge Health & Fitness, ExpressCare and HomeCare of Maryland. Share:Apply Now

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Bank of America or JPMorgan Chase among other leading organizations in the Baltimore area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Business Operations - Project Management - Banking - Customer Success - IT Support - Data Analytics Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.

Overview: At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $salary range and sign-on bonuses up to $3,000 (per location).Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: The HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers, and upright refrigerators & freezers. Qualifications: 4+ years of commercial experience as an HVAC and Refrigeration TechnicianActive EPA CertificationValid driver's licenseMilitary Base Background Clearance requiredExcellent customer relations and interpersonal skillsMechanical aptitude and troubleshooting skillsAbility to safely lift to 50 lbs., climb and balance on a ladder, and work in elevated/high locations. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Description Leidos is seeking a Controls Technician to join our growing team, in support of Security Engineering Programs – Center for Information Systems Security. (SEP-CISS) This Controls Technician will support a National Security Sensitive Program, performing work on a variety of HVAC automation projects, primarily at the mechanical/electrical level. Daily activities will be directed by the Controls Team Lead and may include: Field Testing & Tuning, HVAC Troubleshooting & Repair, HVAC Preventative Maintenance Actions, Equipment Calibrations, and Automation Programming. This position will work in downtown DC at an undisclosed customer site. While this position will work 2pm - 10pm M-F, shift flexibility will be required for sparse weekend & evening work. Due to the sensitive & classified nature of this program, telework is not available.Primary ResponsibilitiesBuilding HVAC & supporting equipment troubleshooting & repair.Building HVAC & supporting equipment preventative maintenance.Building HVAC & supporting equipment field calibration & testing.Providing daily task updates in the service management tool.Supporting other Controls & Automation directives as required.Basic QualificationsActive Interim Top Secret clearance with ability to obtain a Top Secret is a must.Basic mechanical & electrical knowledge of HVAC systems.Proven troubleshooting & repair of HVAC systems.Degree is not required; experience and expertise are critical to this role.Schedule flexibility (Primary shift is 2pm-10pm, M-F with sparse weekend & evening work)Strong written and oral communications required.Highly effective teamwork and collaboration skills.Must possess strong organizational skills and strong interpersonal skills to effectively relate to Leidos and customer needs.Preferred QualificationsFamiliarity with electric, electronic, mechanical, and plumbing (MEP) systemsFamiliar with DDC hardware and/or software of any of the following:LoytecAutomated logicAlertonAllen BradleyReliable controlsFamiliarity with reading, drawing, or revising drawings for DDC control systems.Building Automation ExperienceSCADA Controls FamiliarityOriginal Posting:April 29, 2025For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $55,250.00 - $99,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

The pay range per hour is $39.25 - $46.87Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .About job:Currently hiring for below shifts:B3: 9pm-7am Tue-Friup to $2.50 shift differential based on KeyBenefits eligible within two weeks of employmentAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 2 (MT2), you will assist in the installation, maintenance, and repair of automated material handling equipment and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target service technicians to solve problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, and meet aggressive time lines. You will collaborate with Maintenance Technician 3s and Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You may also assist in training other maintenance technicians and technician trainees to enhance their technical skills and job knowledge. A successful candidate in this role will:Maintain and troubleshoot all electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Adjust scanners, cameras, field buses, scales and printer applicatorsReset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsMaintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Assist with basic electronics/ Programmable Logic Controls troubleshootingConduct maintenance and basic troubleshooting of all types of industrial robotsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies[F&B Only:] Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Core responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licensePC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuring[F&B Only:] Comfortable working in a temperature-controlled environmentExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresBasic blueprint and schematic readingElectrical and electronic principlesBasic metal fabrication and weldingIndustrial Controls and ElectronicsAbility to troubleshoot basic Input/Output functionsProgrammable Logic Control (PLC) programsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with robotic operation/ maintenanceBenefits EligibilityPlease paste this url into your preferred browser to learn about benefits eligibility for this role: https://tgt.biz/BenefitsForYou_C | Pegue esta URL en su navegador preferido para obtener información sobre la elegibilidad de este puesto para recibir beneficios: https://tgt.biz/BenefitsForYou_CAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment