We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

We are looking for Flaggers to join our team!
No experience required. Paid training. Immediate openings.
Valid Driver’s License is Required.
The Flagger is responsible for directing the flow of traffic around construction sites, road maintenance areas, and other work zones. This role involves setting up and taking down traffic control signs, cones, and barricades to ensure the safety of workers and the public. The Flagger uses hand signals, signs, and other traffic control devices to communicate with motorists and guide them safely through or around the work area. The position requires excellent attention to detail, the ability to work outdoors in various weather conditions, and the capability to stand for extended periods.
Job Duties:
Set up signs, cones, and other traffic control devices around work areas to divert traffic. Effectively manage traffic flow with stop/slow paddles. Maintain clear and effective communication with team members using two-way radios. Regularly required to stand and walk and reach with hands and arms for up to 10 hours a day. Ability to lift, carry, push, pull, and move items over 50 pounds. Drive company vehicles to transport traffic control equipment to and from job sites. Perform routine vehicle inspections and maintenance checks to ensure vehicles are in good working condition. Regularly exposed to outside weather conditions, moving equipment and machinery parts, moving traffic, fumes, and airborne particles. Noise level of the work environment is usually moderate to loud. Adhere to all Company Policies and Procedures. Perform other duties as assigned.
Benefits: Medical Dental Vision 401(k) plans with company match Tuition Reimbursement Paid Time Off and Overtime Pay Company paid GED program HSA Safety Boot Reimbursement Program 2nd Chance Employer
Qualifications: Valid Driver’s License. Must pass a background check, including motor vehicle records check. Must successfully pass a drug test and meet federal DOT requirements. Wear proper safety equipment (work boots with safety toe, hard hat, safety glasses, and safety vest). Operate 2-way radio. Willingness to work in various weather conditions and traffic settings. Provide effective communication with contractors and internal teams while delivering the highest level of customer service. Work well in a team environment. Must have excellent attendance, reliable transportation, and a strong work ethic. Successfully complete the ATSSA Flagger training course and company-sponsored Defensive Driver training. Willingness to travel statewide, with occasional overnight stays, and ability to work nights and weekends as required by projects. Must be available for a rotating on-call schedule.
We are an Equal Employment Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

An instrument repair cleaner's job is to detail and clean rental instruments and prepare them to return to stock in a timely and proficient manner. Essential Functions (not all-inclusive): Detail and clean instruments in a timely manner based on production standardsReport quality control rejectsPerform general warehouse and distribution tasksOther duties as assigned About Music & ArtsMusic & Arts embodies the world of creativity and music by encouraging our teammates to find their own individual sound. We strive to create lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the almost indescribable happiness that comes from playing an instrument. We believe in putting our customers first, engaging with respect and integrity and fulfilling our mission with passion.The first Music & Arts was located in a small house in Bethesda, MD and run by founder Benjamin O'Brien. When Music & Arts opened its doors in 1952, we offered printed music, music lessons, dance lessons, and art supplies. Ben decided shortly after opening his business that he wanted to focus on music to better serve his customers -- a decision that remains intact to this day.Since the 1990's, Music & Arts has expanded nationwide through organic growth and a series of acquisitions and mergers with other music dealers. In 2005, Music & Arts joined forces with American Music to become the largest band and orchestra instrument retailer in the United States. Based in Frederick, MD, Music & Arts is now part of the Guitar Center enterprise and comprises 225+ retail stores, 200+ educational representatives, and 250+ affiliate locations.Tojoinourband,you'llneedthefollowingexperience: High School Diploma or GED required. Pay Rate:$15.00/hr The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. Lovethisgigandwanttoapply Send your resume and cover letter today along with salary expectations!Music & Arts is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job- related requirements.If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1-ext. 2862 or by sending an email to .

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

ConstellationHOME is growing with a focus on providing employees with support and opportunities to achieve their career goals.PLEASE NOTE: THIS IS A PART TIME ROLE OFFERING 25 HOURS PER WEEKHere are a few highlights of ourcomprehensive and competitive benefitsplan:40-hour week guarantee with flexible schedules: Work life balance is no longer a nice to have but a necessity. Our flexible schedules allow you to balance both your career and personal life.Take home vehicle:Avoid the wear and tear on your personal vehicle by starting your day from home.Annual raises and bonus:We recognize the achievement of financial, safety, operational and strategic goals through an annual incentive and bonus program.Training & Development:Our in-house training rivals most trade schools and helps keep you up to speed as the industry and technology change.Career Path Opportunities:We have several career paths that allow journeyman to grow within our organization.Competitive Pay:On average, our Journeyman Technicians can earn over $100,000 per year. Job Summary:Identify problems and have the ability to correct problems in specified appliances, or the refrigeration cycle and electrical portion of HVAC equipment. Perform some system work on HVAC equipment.Primary Duties and Responsibilities: (Essential Job Function)Performs and trains others in preventive maintenance on all residential heating, air conditioning and ventilation equipment.Assists in sealed system HVAC or advanced appliance repair as part of training and development.Performs advanced clerical duties necessary to complete requests for service.Maintains advanced Company stock and equipment.Knowledge:Advanced knowledge in tools and material related to the service field.Skills/Abilities:Advanced skills in communicationAdvanced skills in sales of all services offered by Company.Advanced skills in servicing of appliances or heating and air conditioning equipment.Advanced skills in customer relations.Advanced skill in servicing gas/electric water heaters.Education/Experience:Three (3) to four (4) years work experience or combination of time in accredited trade or vocational training program equaling three (3) to four (4) years in basic service for heating, ventilation and air conditioning.CFC certification I and II, Maryland State HVAC Journeyman License and Gas Fitter Card.Competencies:Other (Including physical requirements, working conditions, etc.):Works under direct supervision and selects from a variety of established procedures to accomplish assigned tasks.Performs various temporary complex job duties as assigned by the Supervisor.DisclaimerMust have a valid Driver's license and meet Company driving standards.Recent convictions for crimes reasonable related to the activities of this job may disqualify an applicant.

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits ! Would you like to work with a company that invests in your growth Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are:As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary.What’s in it for YOU:Competitive Pay Rates! 40 hours a week, not flat rateOT as needed over 40 hoursFull Benefits: Medical, Vision, Dental, and 401K planPaid vacationCompany provided uniformCorporate partner discount programCareer advancement through a national companyDuties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components.Perform scheduled preventative maintenance of vehiclesExecute major and minor repairs of defective components.Document all activities in MV’s Fleet Management System.Maintain work environment in an organized and safe condition Qualifications: Talent Requirements:High school diploma or equivalent.Combination of at least five (5) years of apprentice level verifiable training and experience in automotive or diesel mechanics, which may include high school mechanics courses and/or a regional occupational program.Must be able to pass a pre-employment drug screen and random drug testing.MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment If you are looking for a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $19.75 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#BA0034#

Build your best future with the Johnson Controls team!Who We Are:YORK® Chiller Solutions from Johnson Controls, help customers respond to building efficiency needs by providing the widest variety water and air-cooled industrial and commercial chillers on the market. From reducing a facility’s carbon footprint, to delivering a healthier indoor environment and cutting energy costs, we build smaller, more energy efficient chillers tailored to fit almost any comfort or process cooling application – even heating. This role will be based in the Johnson Controls Advanced Development Engineering Center (JADEC) in New Freedom, PA. Candidates must be located within a commutable distance from the facility or be willing to relocate. Get excited!...take a look at where you'll work. Johnson Controls Advanced Development and Engineering Center (JADEC)What We Offer:Competitive salaryHybrid work opportunity (upon the completion of training)Paid vacation/holidays/sick timeComprehensive benefits package including 401K, medical, dental, and vision care– available day one!On the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat You Will Do:This position is within the water-cooled chiller product engineering team. We are seeking a senior engineer to work on chiller PLC control solutions for both new product and chiller retrofit opportunities. The role would focus on both software and hardware solutions for chiller PLC products. As Senior Engineer within our Chillers product development team, you will be responsible for electrical analysis, detailed design, and control, as well as overall electrical performance of sophisticated water-cooled chillers components and systems, including providing support to manufacturing and applications engineering. In this role you will work on control systems for new industrial chiller applications as well as retrofits, hardware design, design test and sustain control panels and system wiring.How You Will Do It:Develop and maintain electronic hardware and software (temperature sensors, pressure sensors, flow sensors, and A-B software).Design of analog and digital interface circuits, development of power supply circuits and/or selection of power supplies.Perform the worst-case circuit analysis and incorporation of appropriate reliability principles to ensure reliable operation over the environmental specifications.Assist chiller team to develop, test and support chiller system controls (This includes selection of system components and accurate interfacing of them to electronic control panel I/O). Acquire agency approvals such as UL, CE and FCC on Printed Circuit boards and Electronic Panels.Independently conduct and apply costing analysis to feasibility studies on proposed designs or modifications to existing designs.Develop schedules which accurately reflect the project breakthroughs and implement to them.Integrate new and modify existing processes to cover all phases of the electronic development process.Provide mentorship and support to:Drafters and DesignersService and Field TechniciansManufacturing on Commercial Systems products.Provide mentorship to drafters and support Service and Manufacturing on Commercial Systems products.Prepares and participates in design reviews.Learns and applies regulatory codes such as UL, NEC, CSA, and CE codes.Proficient at capturing and analyzing test data to identify electrical performance problems and propose solutions for corrections.What We Look For:RequiredBSEE,BSEET, BSEMET,or related fieldPreferred candidate to have 5 years of valid experience with one or more of the following.PLC programming and troubleshooting.HVAC systems and controls.Automation control systems.Electrical systems, wiring diagrams, and troubleshooting (24VDC, 120VAC, & 240VAC).Ability to work in a fast-paced, schedule driven, team-oriented environment.Ability to program and debug PLC programs.Ability to identify obsolete parts for PLCs, HMIs, Network switches and protocol translators for customer upgrades.Provides secondary level product support to the field after product technical support resources are exhausted for PLC applications.Experience with Allen Bradley PLCs and Rockwell software (rslinx, FactoryTalk, Studio 5000, Activation Manager, etc.).Good verbal and written communication skills are required.Must be willing and able to travel domestically and internationally as required (up to 10% of time).PreferredUnderstands chiller controls.Familiarity with HVAC Systems and motor driven mechanical engineering design and test, alternative experience with gas compression would be advantageous.Chiller PLC experience.#Hybrid#ElectricalEngineer

MAINTENANCE TECHNICIAN Baltimore, MD LEVINDALE HOSPITAL PLANT OPERATIONS Full-time - Evening shift - 3:00pm-11:30pm Support Services/Security/Trade 89400 $17.46-$27.29 Experience based Posted:May 6, 2025Apply NowSave JobSaved SummaryJOB SUMMARY:Performs routine scheduled and unscheduled maintenancePosition is on the evening shift but trainingis on the day shift (up to a month)JOB REQUIREMENTS:HS Diiploma/GED preferred1 to 3 years of commercial/hospital maintenance experienceOn call rotation (weekends included in on call rotation) Every 5 to 6 weeks when fully staffed. Must be available for unexpected emergenicesHoliday rotation (at least one holiday per year)Position is on the evening shift but trainingis on the day shift (up to a month)MD driver's license and good driving record preferredAdditional InformationAs one of the largest health care providers in Maryland, with 13,000 team members, We strive to CARE BRAVELY for over 1 million patients annually. LifeBridge Healthincludes Sinai Hospital of Baltimore, Northwest Hospital, Carroll Hospital, Levindale Hebrew Geriatric Center and Hospital and Grace Medical Center, as well as our Community Physician Enterprise, Center for Hope, Practice Dynamics, and business partners: LifeBridge Health & Fitness, ExpressCare and HomeCare of Maryland. Share:Apply Now

Overview: Are you ready to lead with precision and tackle complex challenges As an experienced Maintenance Coordinator, you will leverage your technical knowledge to oversee critical aspects of our projects, ensuring construction work complies with all engineering standards, codes and contract specifications.Bringyour diverse ideas to build stronger, more resilientcommunities. Apply now and transform your career with us.Click hereto find out how Adrian Price, Preconstruction Manager, grew his engineering career at Flatiron. What you will be doing: Meets daily with project crews to review production schedule and confirm all materials, equipment and resources are readily available for production to continue on schedule and within budget. Collects, coordinates and analysis shop drawings, design specifications, material requirements and project data through the duration of the project to ensure quality and contract specification compliance. Provides technical input for project work plan and scheduling. Identifying risk elements of production, materials, equipment or process that could negatively impact the budget or schedule. Evaluates daily production, schedule and budget projections to accurately track project performance. Documents daily activities in Company approved methods and technologies. Remits accurate project quantity input and controls using assigned project cost coding to ensure project financials are accurately reported. Manages cost coding with Company finance and accounting teams regarding employee time, materials, equipment and subcontractor needs.Coordinate workers concerned with major maintenance, testing and recommissioning equipment for existing installationsAttend project meetings to develop a coordinated maintenance schedule in alignment with the construction activitieIdentify opportunities for process improvements and cost-saving initiativesMaintain records of maintenance activities, inspections, and repairsReviews and approves daily timecards for all Company construction crews. Works with Office Manager, payroll and job construction supervisors to resolve timecard inquiries, as needed. Reviews project specifications for quality assurance at the beginning of work, during the project work and after work completes. Initiates and manages appropriate certificates, inspections and other documentation regarding construction production on the project site. Works with construction crews and engineering leaders to plan field layout on the project site, ensuring appropriate utility and commercial lines are marked before production begins. Initiates and manages any permits needed before work can begin. Assists the development of design drawings and provides technical input, as needed. Coordinates subcontractor work methods, schedule and crews as needed. What we are looking for: Bachelor's Degree in a related field required, or General educational degree1+ years of experience required, working in an industrial, manufacturing, or commercial facility.Beginner knowledge of construction equipment & techniques, drawing & specifications, building materials and required standards applicable to the project. Ability to assume responsibility, interface and communicate effectively with others.Ability to manage multiple tasks efficiently and effectively in a fast-paced environment. Knowledge of construction scheduling and production time management preferred. Why work for us: Some of the benefits you may be eligible for as an employee are:Comprehensive compensation package and paid time off programIndustry leading 401(k)/RRSPMedical/Extended Health Care, Dental, Vison and/or Provincial MedicalWellness benefits & Employee Assistance ProgramTuition Reimbursement ProgramWe are an EEO/AA/ADA/Veterans employer. Salary Min: USD $65,000.00/Yr. Salary Max: USD $80,000.00/Yr.

Cargill’s size and scale allows us to make a positive impact in the world. Our purpose is to nourish the world in a safe, responsible and sustainable way.We are a family company providing food, ingredients, agricultural solutions and industrial products that are vital for living. We connect farmers with markets so they can prosper. We connect customers with ingredients so they can make meals people love. And we connect families with daily essentials from eggs to edible oils, salt to skincare, feed to alternative fuel. Our 160,000 colleagues, operating in 70 countries, make essential products that touch billions of lives each day. Join us and reach your higher purpose at Cargill.Job Purpose and ImpactThe Maintenance Supervisor will coordinate the deployment of leading maintenance practices in alignment with production needs. In this role, you will supervise a team which executes a variety of medium complex activities to maintain capacity utilization and quality standards for reliable operations in the region.Key AccountabilitiesCoordinate the execution of specific equipment strategy for each asset involved with containing, controlling or safeguarding a high hazard process.Implement methodologies to improve operational effectiveness in compliance with regulatory codes and standards.Assist to lead the integration of contractor partners and equipment providing support to the plant force.Partner with regional and global leadership to support area leading practices.Develop the operational related budget to track the area progress against the estimate.You will have some authority for personnel decisions related to hiring, performance, or disciplinary actions, and much of your time is spent completing the same tasks as the subordinate employees.Other duties as assigned#LI-CF1 #fgb #themuseQualificationsMinimum QualificationsBachelor’s degree in a related field or equivalent experienceMinimum one year of directly related work experiencePreferred QualificationsKnowledge of related tools, processes controls and area technology systemsExperience coordinating third party resources to deliver business resultsOne year of supervisory experienceExperience in managing budgetsTraining in structured problem solvingExperience with servant leadership modelPosition InformationThis position is located in White Marsh, MarylandRelocation assistance will be provided for this position.Equal Opportunity Employer, including Disability/Vet.

Line of Business: AggregatesAbout UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingAssist in the maintenance and repair of mechanical equipment.Learn and apply safety protocols and procedures.Perform routine inspections and diagnostics.Collaborate with experienced mechanics to develop skills.Maintain accurate records of repairs and maintenance activities.What Are We Looking ForStrong interest in mechanical systems and repair.Ability to learn and apply new skills quickly.Effective communication and teamwork abilities.High level of attention to detail and accuracy.Capability to work in various weather conditions and environments.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$26.88 per hour.Benefits through the Union for Medical, Dental, Vision and PensionUnion paid vacation, sick leave and holidaysEqual Opportunity Employer - Minority / Female / Veteran / Disabled

Description Unleash Your PotentialAt Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customer’s success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.If this sounds like an environment where you can thrive, keep reading!We are in search of a Senior Network Installation Technician at the customer site at Fort Meade, MD and will require travel.Our Opportunity:The Defense Enclave Services contract will unify the DOD Fourth Estate Defense Agencies and Field Activities’ common use information technology systems, personnel, functions and program elements under the direction of DISA’s Fourth Estate Network Optimization program office. This technician will support a large federal agency’s Network Infrastructure through survey, design, and deployment of structured networks and will be responsible for the upkeep of the security posture of the environment. This is accomplished through projects such as new installations, life cycle replacement projects, Cable Plant and wireless installations that are compliant with commercial, TEMPEST, and NIST standards.Clearance Requirement:•Must hold an active Top Secret security clearance and be able to obtain a TS/SCI. (US Citizenship required)Key Responsibilities:•Lead network survey, design and installations under direction of the government.•Conduct Site Surveys of customer premise networks in CONUS and OCONUS locations.•Create detailed Site Survey reports detailing a site’s current infrastructure, NIST and TEMPEST compliance, along with design recommendations.•Configure, install, test, certify, and troubleshoot network infrastructure cabling.•Ensure Network cabling infrastructure is compliant with current NIST and TEMPEST Standards.•Build and install equipment racks.•Install, dress, label, and terminate Cat6 and Fiber cable in telecommunications rooms.•Test and troubleshoot network infrastructure issues on SIPR and NIPR networks.•Create accurate reports and documentation to design/certify network infrastructure.•Track, manage, and ensure project tasks are completed in a timely manner.•Develop Bills of Material (BOM) for network plant design requirements.•Plan and perform preventive maintenance and scheduled upgrades (Life-cycle replacements)•Investigate physical faults in the network.•Report network infrastructure deployment status to key stakeholders.•Have flexible working hours to be available to support off hour work, when needed.Must have’s:•Bachelor’s degree and 4 years of relevant experience; additional years of experience may be substituted in lieu of a degree.•Understanding of ANSI/TIA-568 and 569 standards.•Requirements of Protective Distribution Systems (PDS) for Classified Systems as directed by Security and/or the Certified Tempest Technical Authority (CTTA).•Knowledge of National Security Telecommunication & Information Systems Security Instruction (NTISSI) 7003.•Knowledge of DISA network topologies and standards.•Topology and rack elevations using Visio.•Experience with various OTDR, cable testers, and network sniffers to develop reports for infrastructure certification documentation.Nice to have’s:•BICSI certification.•Sec+ certification.DISADESExternal Referral EligibleOriginal Posting:April 9, 2025For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $72,150.00 - $130,425.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Featuredjob

Overview: Orthodontic Assistant **$2,500 Sign on Bonus Offered** Pine Dentistry and Braces - District Heights, MD location Full Time: Monday - Friday 8:45am - 5:00 pm Orthodontic Assistant Certification Required Competitive Pay Full Benefits Work for a company that is truly making the world a happier place, one smile at a time! At Benevis, we create over a million smiles a year in the communities we serve and believe that every person deserves access to quality, affordable dental care. This mission drives everything we do. With over 3000 employees in offices across the country from clinical to support staff - we are united in our mission to create happy, healthy smiles through providing high quality dental care in a fun, compassionate environment. Are you ready to join us in creating our next million smiles We have JUST the opportunity for you.We are actively seeking an Orthodontic Assistant to join our team. Support our mission to providing excellent dental care in the community and help us create more smiles and memorable experiences. Join a team that believes in teamwork and truly cares about their patients. Responsibilities: Deliver quality and compassionate care to every patient Guide parents and patients through our processes before treatment Educate patients in oral hygiene instruction and provide postoperative instruction Prepare patient for examination and treatment Take x-rays and save to patient charts Take quality orthodontic facial photos Responsible for the operational readiness Prepare tray set-ups for dental procedures Mix amalgam, cement, pulp paste and prepare impression materials Sterilize and disinfect instruments and equipment Clean chairs and rooms Assist professional dental staff with treatment Document patient information, treatment plans, and procedures in patient chart Pour, trim and polish impression casts Fabricate custom impression trays Perform to the highest integrity by adhering to all government regulations, company standards, and company compliance programs Other duties as assigned Qualifications: Orthodontic or Dental Assistant Certification (State dependent) Preferred at least 1 year of experience in Orthodontic Assisting Willing to travel in territory assigned to team High focus on customer service and satisfaction Must love working with children Compassion and high level of service for our patients, parents and staff Integrity, always doing the right thing Dependable, reliable to be at work when scheduled Attention to detail Able to organize work, engage in a variety of tasks simultaneously and consistently meet deadlines Professional manner and appearance at all times We Offer: Competitive compensation Quarterly bonuses based on Office performance Comprehensive Benefits Package: Medical, Dental, Vision, 401K with match, flexible spending accounts, paid time off, company holidays and much more! We value teamwork, mutual respect and cooperation. We do not practice unlawful discrimination, including harassment or tolerate it in our workplace. What do we mean by discrimination We mean that we do not discriminate on the basis of race, color, creed, religion, sex, national origin, age, citizenship, disability, sexual orientation or any other characteristic protected by federal, state, or local law.

Overview: MARKET LEADING PAY, PLUS BONUSESHonda of Owings Mills is part of the fast growing Group 1 Automotive, a leader in automotive retail sales and service.We are growing and looking for Automotive Service Technicians/Mechanicsto join our team!Our Service Technicians should be passionate about customer service, take pride in their work and enjoy being part of a winning team that cares about employees.The salary range for this position is between $20 - $50 per flag hour.We offer...Market Leading Pay, based on experience, Plus BonusesA Great Working Environment with the Latest EquipmentStructured, Self-paced and paid Training Opportunities Leading to Manufacturer and Group 1 RecognitionHealth, Dental & Vision InsuranceLife & Disability Insurance401(k) with Company MatchPaid Time offEmployee Vehicle Purchase ProgramEmployee Stock Purchase PlanPinnacle Awards ProgramYou needAutomotive Technician or Mechanic ExperienceA Positive & Friendly AttitudeTools based on your experienceCommunication SkillsBasic Computer SkillsAbility to Achieve Targeted GoalsHigh School Diploma or Equivalent Must have a Valid Driver’s License Group 1 is a Fortune 250 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment* Group 1 Automotive is an Equal Employment Opportunity employer.IND1

Job Summary: Operate and maintain press to production standards and quality. Set-up, adjust and operate equipment to print and fold signatures, ensuring expectations of customer specifications. Duties/Responsibilities: Review job jackets and plan work process to ensure meeting of customer specifications Monitor assigned press machine during run to ensure adherence to specificationsPerforming quick and efficient make-readies, product size changeover and folder changeoversPerform preventative maintenance and troubleshoot machine problems, resolving if possible, notifying GPS or Print Process Manager as neededProvide training, as required, to Assistant in machine operation and safetyComplete and maintain all required paperwork, job jackets, records, documents, timekeeping, etc. Follow all required safety procedures such as: PPE’s, Ergonomics, and etc. Performs job in a manner that protects the health and safety of all employees. Assist with housekeeping in the Press areaOther duties as assigned Basic Qualifications: High School Diploma or GEDStrong math and mechanical skills.Ability to effectively communicate with other employees Desired Skills and Abilities: Previous Press experience is preferredKnowledge of a variety of small hand tools and precision measuring devices is preferred Physical Requirements Ability to frequently transport and position materials weighing up to 65 pounds CJK Group is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. #SPA24

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Bank of America or JPMorgan Chase among other leading organizations in the Baltimore area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Business Operations - Project Management - Banking - Customer Success - IT Support - Data Analytics Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.

*Wednesday-Saturday 8pm-6am *About the RoleAs a Maintenance Technician, you will promote workplace efficiency and profitability by maintaining, inspecting and repairing facilities, equipment and machinery. What You’ll DoDaily inspection and repair of all conveyor systems and equipmentRoutine inspection, preventative maintenance and maintenance of air compressors, generators, compactors, bailers, conveyors and power and material handling equipmentPerform inspection and repair of fire protection equipmentParts administrationPerform minor electrical and plumbing repairs, painting and office furniture movesPerform routine maintenance on heating and air conditioning unitsMaintain lighting throughout the facilitySort, stack and load pallets, cardboard, aluminum, steel and light bulbs for recyclingAssist outside contractors in performing various dutiesPromptly answer calls for jams, malfunctions or other maintenance-related issuesWhat Skills You HaveRequiredBasic knowledge of mechanical, electrical, plumbing and HVAC equipmentCompliance with all MSDS standards and lock-out/tag proceduresAbility to climb ladders and run all power equipmentAbility to work with minimal supervisionMust provide own basic set of toolsAbility to use cleaning and disinfecting solutions, oil and equipment according to MSDS procedurePay Range: $24.20 - $38.70Kohl’s offers a variety of benefits to associates depending on full-time/part-time status and work hours, including: WORK LIFE BALANCE (PTO, Vacation Buy Program, Parental Leave), HEALTH & WELLNESS (Medical, Dental, Vision and other short and long term disability programs, Emergency health and wellness programs such as Accident Protection Plans, Critical Illness Plans and more), SAVINGS & RETIREMENT BENEFITS (401k, Flexible Spending Accounts and associate discount programs with Kohl’s partners), INSURANCE PROGRAMS (Life Insurance for you, your family or your pet, as well as other protection programs), and LIFE EVENTS (Legal and adoption assistance benefits).

The pay range per hour is $45.50 - $54.33Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .About job:Currently hiring for below shifts:B3: 9pm-7am Tue-Friup to $2.50 shift differential based on KeyBenefits eligible within two weeks of employmentAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 3 (MT3), you will be a key technical subject matter expert that ensures high equipment availability rates. You will use preventive and predictive maintenance processes, rapidly troubleshoot equipment breakdowns, and quickly restore equipment to service. You will work with other Target maintenance technicians to solve difficult problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, handle multiple projects, and work with a sense of urgency. You will collaborate with others to perform Root Cause Analysis for equipment failures, and fix systemic issues using careful observation and diagnostic tools. You will have an expert understanding of system controls logic and troubleshooting techniques. As the technical subject matter expert on a shift, you will also act as a technical trainer, sharing your knowledge with maintenance technicians and technician trainees to enhance their technical skills and job knowledge.An individual in this role will:Maintain and troubleshoot electrical/mechanical aspects of Material Handling Equipment (MHE), including conveyors, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Control and adjust positioning accuracy and timingControl and adjust scanners, cameras, scales and printer applicatorsControl, reset, repair or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentInstall, maintain, and troubleshoot relay logic, ladder diagrams, and control components-- photo eyes, motor starters, relays, limit switches, proximity sensors, timers, solenoids, Servo drives, frequency inverters, linear drives, tachometers and encodersTroubleshoot PLC programs, components (CPU back plains, I/O boards, counters, modules, and devices), field buses (ASI, Profibus, DeviceNet, etc.), and communications modules (Ethernet). Configure and adjust PLC parameters and component setupConduct maintenance and higher level troubleshooting of any robot typeTroubleshoot power distribution systems, branch circuits, lighting systems, transformers, and wiring methods and materials, up to 480VDevelop work plans with peer technicians for emergency repair of critical assetsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies, as neededNavigate ladders and gangways safely and work off platforms and equipment at significant heightsWork effectively in varied conditions, temperatures, and environmentsFrequently monitor all aspects of the internal and external worksite, which may include standing/walking for up to 10-12 hoursLift and/or move product or items up to 49 pounds[F&B Only:] Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Core responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Possess or ability to obtain a valid driver’s licenseExcellent PC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuring[F&B Only:] Comfortable working in a temperature-controlled environmentExperience with the following areas:Preventive/predictive maintenance proceduresBlueprint and schematic readingWork order managementIndustrial Electrical, Controls and ElectronicsProgrammable Logic Control (PLC) programsNational Electrical Code (NEC) and Material Handling Equipment (MHE) safety standardsAutomated material handling equipment or robotic maintenanceDesired:Degree from a technical or community college, or accredited industrial maintenance certifications (PLCs, Industrial Networks, Machine Logic, Robotics), with a focus in the Mechanical/Electrical fields4+ years of experience in the Mechanical or Electrical maintenance fieldBenefits EligibilityPlease paste this url into your preferred browser to learn about benefits eligibility for this role: https://tgt.biz/BenefitsForYou_C | Pegue esta URL en su navegador preferido para obtener información sobre la elegibilidad de este puesto para recibir beneficios: https://tgt.biz/BenefitsForYou_CAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

ConstellationHOME is growing with a focus on providing employees with support and opportunities to achieve their career goals.PLEASE NOTE: THE SCHEDULE FOR THIS ROLE WILL BE 1230 - 9 PM M-F WITH A 1 HOUR LUNCHHere are a few highlights of ourcomprehensive and competitive benefitsplan:40-hour week guarantee with flexible schedules: Work life balance is no longer a nice to have but a necessity. Our flexible schedules allow you to balance both your career and personal life.Take home vehicle:Avoid the wear and tear on your personal vehicle by starting your day from home.Annual raises and bonus:We recognize the achievement of financial, safety, operational and strategic goals through an annual incentive and bonus program.Training & Development:Our in-house training rivals most trade schools and helps keep you up to speed as the industry and technology change.Career Path Opportunities:We have several career paths that allow journeyman to grow within our organization.Competitive Pay:On average, our Journeyman Technicians can earn over $100,000 per year. Job Summary:Identify problems and have the ability to correct problems in specified appliances, or the refrigeration cycle and electrical portion of HVAC equipment. Perform some system work on HVAC equipment.Primary Duties and Responsibilities: (Essential Job Function)Performs and trains others in preventive maintenance on all residential heating, air conditioning and ventilation equipment.Assists in sealed system HVAC or advanced appliance repair as part of training and development.Performs advanced clerical duties necessary to complete requests for service.Maintains advanced Company stock and equipment.Knowledge:Advanced knowledge in tools and material related to the service field.Skills/Abilities:Advanced skills in communicationAdvanced skills in sales of all services offered by Company.Advanced skills in servicing of appliances or heating and air conditioning equipment.Advanced skills in customer relations.Advanced skill in servicing gas/electric water heaters.Education/Experience:Three (3) to four (4) years work experience or combination of time in accredited trade or vocational training program equaling three (3) to four (4) years in basic service for heating, ventilation and air conditioning.CFC certification I and II, Maryland State HVAC Journeyman License and Gas Fitter Card.Competencies:Other (Including physical requirements, working conditions, etc.):Works under direct supervision and selects from a variety of established procedures to accomplish assigned tasks.Performs various temporary complex job duties as assigned by the Supervisor.DisclaimerMust have a valid Driver's license and meet Company driving standards.Recent convictions for crimes reasonable related to the activities of this job may disqualify an applicant.

Overview: Maintain and repair all store equipment and execute all environmental compliance programs, complete scheduled preventative maintenance tasks, and perform all assigned maintenance activities in order for the stores to continue providing total customer focus to our customers.We are looking for dedicated & skilled individuals who have an excellent technical and mechanical knowledge of specific hardware and devices in order to keep our stores running 24/7, 365 days a year. With on-the-job training and specialized training centers you will become an authorized service provider for some of the biggest names in the HVAC and Restaurant Equipment industry, just to name a few:LennoxBev-AirYorkGilbarco Veeder-RootTrueCaptive AirHil PhoenixLancerNCRAmanaBunnWe pride ourselves on providing one of the best benefit packages around, including:4-day work week3 weeks Paid Time Off (after first 30 days of employment)Medical/ Dental/ VisionQuarterly Bonus401K & Employee Stock OwnershipUniform & Boot AllowanceCompany Provided Tools & SuppliesCareer Path and Promotions Responsibilities: Maintain store equipment, HVAC, refrigeration, petroleum equipment and overall facility in good working orderTroubleshoot, diagnose issues and make repairs to equipment according to established procedures to minimize parts usage.Complete scheduled and assigned preventative maintenance of all store equipment.Complete scheduled and assigned washing and cleaning of store’s windows.Communicate issues and provide feedback to the Facility Support Manager regarding maintenance issues, facility/equipment opportunities and outside service vendor performance.Utilize maintenance work order system to complete repair calls, close completed calls, enter resolutions for calls and update calls according to company policies and procedures. Complete assigned work by required deadline. Respond to high priority calls according to company guidelines.Maintain fully stocked inventory and be accountable for all aspects of assigned inventory; assist in monitoring and control of maintenance inventory. Requisition parts necessary to complete the job. Provide technical information to ordering team ensuring proper delivery and ordering of all non-stock parts.Attend and participate in all work related meetings, scheduled inventories and training classes. Maintain all certifications as required by manufacturers and local/state/federal law.Maintain company vehicle and adhere to all state/local/federal laws and company policies regarding operation and maintenance of company vehicle.All other tasks assigned by management. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)EducationHigh School Diploma/GED requiredTechnical / Trade training / Sheetz training requiredExperienceNo Experience required with a trade education2 years related experience preferredAt least 1 years’ experience in HVAC, electrical, mechanical or a related trade requiredLicenses/CertificationsValid Driver’s license requiredUniversal 608 EPA certification preferred or the successful obtainment in timeframe defined by managementAvailabilityMust be available to work beyond usual end time on occasion to complete jobsMust be available to work every other Saturday and SundayMust be available to work holidays when holiday falls on a regularly scheduled work day.Must be available to be “On Call” and respond to emergency calls a minimum of 58 scheduled days per year. Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment If you are looking for a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $19.75 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#BA0034#

MASTER MECHANIC Randallstown, MD NORTHWEST HOSPITAL MAINTENANCE Full-time - Day shift - 7:00am-3:30pm Support Services/Security/Trade 89281 $17.50-$36.57 Experience based Posted:April 25, 2025Apply NowSave JobSaved SummaryJoin a group of seasoned, supportive teammates in a clean and well maintained plant! Other benefits include regular infrastructure investment, robustrecognition program and team building events in a fun department!JOB SUMMARY:Under limited Supervision, installs, repairs, and maintains all physical elements of the institution to ensure a continued safe environment for all residents, staff and visitorsJOB REQUIREMENTS:Basic professional knowledge; equivalent to a Bachelor's degree; working knowledge of theory and practice within a specialized fieldFive years experience as a P.M. mechanic, maintenance mechanic, or three years experience in a mechanical trade such as H.V.A.C., pipefitting, engineering5-7 years experienceRotating weekly on call and weekend coverage every 7 to 8 weeks.Additional InformationAs one of the largest health care providers in Maryland, with 13,000 team members, We strive to CARE BRAVELYfor over 1 million patients annually. LifeBridge Healthincludes Sinai Hospital of Baltimore, Northwest Hospital, Carroll Hospital, Levindale Hebrew Geriatric Center and Hospital and Grace Medical Center, as well as our Community Physician Enterprise, Center for Hope, Practice Dynamics, and business partners: LifeBridge Health & Fitness, ExpressCare and HomeCare of Maryland. Share:Apply Now

***Consideration given to applicants residing within a commutable distance to New Freedom, PA or willing to relocate***What You Will Do:Our Test Engineer will oversee product testing throughout the test life cycle. This includes designing, planning, execution, and preliminary analysis of results. The Test Engineer must possess and/or have the ability to develop a working knowledge of HVAC/R equipment and its application and has experience with component or system testing, test procedure development, mechanical fluid or airflow system design, troubleshooting, and operation. our Test Engineers are required to execute the testing for individual test subjects in order to successfully and efficiently complete testing for the product area customer. In this role you will conceive, develop, and evaluate plans for solving complex testing challenges. The ideal candidate will have technical aptitude in HVAC. This position is not eligible for Visa sponsorship.How You Will Do It:Provide technical communications for Test Engineering to product customer(s).Plan and execute tests of chillers and components. This may include:Participate in the development of and/or receive and review test specifications from customer group; seek out and acquire needs from other areas/disciplines who may wish to benefit from testing a particular subject.Use input from the customer group(s) to facilitate test plans and identify resource (human, physical) requirements.Meet with product engineering, product management, product technical support, or equivalent groups to agree upon and issue test plans.Work within the Test Engineering team to schedule tests and required resources with regards to capacity limitation.Provide oversight and input to Test Technicians for set up of data acquisition software configurations.Work with labor, test support, and engineering resources to actively manage the test from set up to completion. This includes daily monitoring and planning, communication, direct data acquisition, review of data acquired, provide engineering analysis of data acquired, problem resolution, and other activities necessary in order to efficiently perform and complete testing in a timely fashion.Maintain a proficiency in understanding chiller test data to guide the customer engineering teams as necessary to acceptance or assist in explanation of data results.Drive the evaluation and creation of standard procedures, test standards, and processes using applicable engineering tools. This includes, but is not limited to LEAN, 6-Sigma, Value Stream Mapping, Design of Experiments (DOE), 5S, Gemba, Kaizen (continuous improvement), KPI analysis and development, PDCA (Plan, Do, Check, Act), and Root Cause Analysis.Use experience to develop new procedures, processes, and resources as necessary to provide more efficient, accurate, and advanced testing services for product customers.What We Look For:BS required in an engineering or engineering adjacent discipline.Preferred combination education and experience, three (3) years direct work experience in the following: HVAC/R equipment development, servicing or testing, good understanding of HVAC/R systems, concepts, and diagnostics.Ability to perform test data acquisition and data analysis, test troubleshooting and diagnostics, technical reporting, and related communication at various levels is required.Experienced in environments ranging from laboratory, manufacturing/testing facilities, and field sites.Able to work in fast-paced, schedule driven work environment and possess the agility/adaptability to quickly move from one task to another when required. Must be self-motivated.Strong communication skills; willing to confront issues in an open, efficient, and tactful manner.Strong group communication and presentation skills.Demonstrated use of engineering tools and concepts within a manufacturing or testing facility.Good computer and data analysis/management skills with proficiency in Microsoft Suite Applications (Word, Excel, Access, and PowerPoint) as well as internet software and e-mail.Preferred:Familiarity in one or more technical and operational disciplines within HVAC platform development.Background in engineering or development testing.#TestEngineer#Hiring

Line of Business: AggregatesThe Plant Maintenance Technician is responsible for ensuring the optimal performance, safety, and reliability of all plant equipment and machinery. This role involves conducting routine inspections, performing preventative and corrective maintenance, and troubleshooting mechanical, electrical, and hydraulic issues. The technician will work closely with production teams to minimize downtime and ensure that all maintenance activities are performed in compliance with safety regulations and company standards.About UsHeidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees.What You'll Be DoingPerform routine maintenance and repairs on plant equipment.Troubleshoot mechanical issues and implement solutions.Ensure compliance with safety standards and regulations.Collaborate with team members to optimize plant operations.Maintain accurate records of maintenance activities.What Are We Looking ForStrong mechanical aptitude and problem-solving skills.Ability to read and interpret technical manuals and schematics.Effective communication and teamwork abilities.Proficiency in using hand and power tools.Commitment to safety and quality standards.Conditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check.Some positions require FMCSA regulated ongoing drug and alcohol testing.Work EnvironmentRole operates primarily in environments where the conditions include moving mechanical equipment, inclement weather, heat, cold, humidity, and elevated noise level.What We Offer$29.55 per hour.Benefits through the Union for Medical, Dental, Vision and Pension.Union paid vacation, sick leave and holidays.Equal Opportunity Employer - Minority / Female / Veteran / Disabled

Overview: BMW of Annapolisis part of the fast growing Group 1 Automotive, a leader in automotive retail sales and service. We are growing and looking for Quality Automotive Service Technicians/Mechanicsto work with our Quality Dealershiprepresenting a Quality Product! Unlock Your Potential: Join Our Tech Team! Are you an Automotive Technician enthusiast with a passion for innovation Look no further! We're BMW of Annapolis, and we're on the hunt for skilled technicians to join our dynamic team.The salary range for this position is between$20 - $50 per flag hour. Why Choose BMW of Annapolis Industry leading pay: Earn $100,000 and more “Your skills are valuable, and we recognize that. Enjoy industry leading pay and benefits package including 401k and Company Stock purchase programs 4 day work week: Are you feeling overwhelmed at your current location, struggling to find a healthy work-life balance We can help. We offer 4 day work schedules with flexible start times and daily schedules. Team Environment: Join a team of like-minded individuals who share your passion for excellence, collaboration, and pushing the boundaries of what's possible. Cutting-edge Technology: Work with the latest automotive technologies, from electric vehicles to advanced diagnostics. Exciting Challenges: Every day is a new opportunity to solve complex technical puzzles and keep BMWs performing at their best. Your Qualifications: Previous experience in automotive technology or related fields Strong diagnostic and problem-solving skills A drive for excellence and a dedication to delivering top-notch service Willingness to learn and adapt to new technologies Join us in shaping the future of automotive technology! To apply, visit our website at www.bmwofannapolis.com/ or contact Service Manager Eric Fischer at .Don't miss out on this fantastic opportunity to be part of a winning team and drive your career forward with BMW of Annapolis! #TechInnovators #JoinTheTeamOur Service Technicians should be passionate about customer service, take pride in their work and enjoy being part of a winning team that cares about employees.Group 1 is a Fortune 250 company that owns and operates automotive dealerships and collision centers in the United States and the United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!Group 1 Automotive is an Equal Employment Opportunity employer.IND1

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Bank of America or JPMorgan Chase among other leading organizations in the Baltimore area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Business Operations - Project Management - Banking - Customer Success - IT Support - Data Analytics Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.

The pay range per hour is $39.25 - $46.87Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .About job:Currently hiring for below shifts:B3: 9pm-7am Tue-Friup to $2.50 shift differential based on KeyBenefits eligible within two weeks of employmentAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 2 (MT2), you will assist in the installation, maintenance, and repair of automated material handling equipment and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target service technicians to solve problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, and meet aggressive time lines. You will collaborate with Maintenance Technician 3s and Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You may also assist in training other maintenance technicians and technician trainees to enhance their technical skills and job knowledge. A successful candidate in this role will:Maintain and troubleshoot all electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Adjust scanners, cameras, field buses, scales and printer applicatorsReset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsMaintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Assist with basic electronics/ Programmable Logic Controls troubleshootingConduct maintenance and basic troubleshooting of all types of industrial robotsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies[F&B Only:] Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Core responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licensePC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuring[F&B Only:] Comfortable working in a temperature-controlled environmentExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresBasic blueprint and schematic readingElectrical and electronic principlesBasic metal fabrication and weldingIndustrial Controls and ElectronicsAbility to troubleshoot basic Input/Output functionsProgrammable Logic Control (PLC) programsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with robotic operation/ maintenanceBenefits EligibilityPlease paste this url into your preferred browser to learn about benefits eligibility for this role: https://tgt.biz/BenefitsForYou_C | Pegue esta URL en su navegador preferido para obtener información sobre la elegibilidad de este puesto para recibir beneficios: https://tgt.biz/BenefitsForYou_CAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

COMPANY OVERVIEWAs the nation's largest producer of clean, carbon-free energy, Constellation is a company purposely-built to meet the challenges of the climate crisis. Constellation has been the leader in clean energy production for more than a decade and we are growing our company and capabilities. Now, we're accelerating, speeding our low-carbon or no-carbon power to more people in more places, day and night, providing our customers and communities with options to buy, manage and use energy as part of their decarbonization mission. The race is on to confront the climate crisis and Constellation is ready to meet the challenge. Come join us as we lead energy, together.TOTAL REWARDSConstellation offers a wide range of benefits and rewards, designed to help our employees thrive professionally and personally. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays and sick days and much more.Expected hourly rateof $28.63 to $31.81, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k). PRIMARY PURPOSE OF POSITIONInstalls and modifies existing residential HVAC equipment and all types of related products according to installation instructions, supervisor instructions and all applicable county or city codes.Performs miscellaneous trouble shooting and repairs.Modifies and fabricates sheet metal as needed per installation.Able to identify electrical, plumbing and safety problems that apply to the installation and takes necessary corrective action.Performs necessary clerical duties with job.PRIMARY DUTIES & ACCOUNTABILITIESPerform independently work skills in residential heating & air conditioning replacement applications.Perform independently work skills in residential plumbing and gas piping applications.Perform independently work skills in residential flue venting applications.Perform independently work skills in residential sheet metal ducting applications.Assists in other advanced applications of residential home comfort products.Trains others in the general work skills of residential home comfort applications.Trains others in the general work skills of residential HVAC install applications.Performs clerical duties necessary to complete job work orders.Maintain proper truck stock and equipment maintenance.Works independently or under direct supervision and selects from a variety of established procedures to accomplish assigned tasks.Performs various specific job duties as assigned by the Dept. Manager.MINIMUM QUALIFICATIONS3+ years of experience in residential HVAC installations for residential systems.Maryland State Journeyman HVAC License.Valid Maryland driver's license.Levels I & II CFC certification.Gas fitter's license.Must have basic hand tools to properly perform job requirements.Demonstrated knowledge of sheet metal skills, copper, and gas piping installations.Demonstrated knowledge of residential Gas & Electric supplied heating furnaces.Demonstrated knowledge of residential Hot Water Heaters.Demonstrated ability to communicate effectively both orally and in writing along with customer service skills.

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment If you are looking for a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $19.75 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#BA0034#

Additional Job Info: This position offers a base hourly range of $19.73 - $34.62 per hour, depending on experience and qualifications, plus bonus based on company performance.One of the MANY work perkz at Sheetz is quarterly employee bonuses based on company performance! And there’s more – A LOT more like competitive salaries, PTO and parental leave, 401k match and employee stock ownership, limitless professional development and growth opportunities, tuition reimbursement, full medical, vision and dental coverage, and snack discounts! Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: MARKET LEADING PAY, PLUS BONUSESHonda of Greenbelt is part of the fast growing Group 1 Automotive, a leader in automotive retail sales and service.We are growing and looking for Automotive Service Technicians/Mechanicsto join our team!Our Service Technicians should be passionate about customer service, take pride in their work and enjoy being part of a winning team that cares about employees.The salary range for this position is between$20 - $50 per flag hour.We offer...Market Leading Pay, based on experience, Plus BonusesA Great Working Environment with the Latest EquipmentStructured, Self-paced and paid Training Opportunities Leading to Manufacturer and Group 1 RecognitionHealth, Dental & Vision InsuranceLife & Disability Insurance401(k) with Company MatchPaid Time offEmployee Vehicle Purchase ProgramEmployee Stock Purchase PlanPinnacle Awards ProgramYou needAutomotive Technician or Mechanic ExperienceA Positive & Friendly AttitudeTools based on your experienceCommunication SkillsBasic Computer SkillsAbility to Achieve Targeted GoalsHigh School Diploma or Equivalent Must have a Valid Driver’s License Group 1 is a Fortune 250 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment* Group 1 Automotive is an Equal Employment Opportunity employer.IND1

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

ConstellationHOME is growing with a focus on providing employees with support and opportunities to achieve their career goals.Here are a few highlights of ourcomprehensive and competitive benefitsplan:40-hour week guarantee with flexible schedules: Work life balance is no longer a nice to have but a necessity. Our flexible schedules with 9 recognized holidays a year allow you to balance both your career and personal life.Take home vehicle:Avoid the wear and tear on your personal vehicle by starting your day from home.Annual raises and bonus:We recognize the achievement of financial, safety, operational and strategic goals through an annual incentive and bonus program.Training & Development:Our in-house training rivals most trade schools and helps keep you up to speed as the industry and technology change.Career Path Opportunities:We have several career paths that allow journeyman to grow within our organization.Competitive Pay:On average, our Journeyman Technicians can earn over $100,000 per year. Job DescriptionPerforms a wide range of HVAC services for Commercial customers. Promotes the sale of all other services offered by our Company to customers.Expected hourly rate of $31.82 to $35.35, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k).PRIMARY DUTIES & ACCOUNTABILITIES&bull Identifies and corrects problems in Commercial HVAC field including but not limited to split system heat pumps, water source heat pumps, steam and hot water boilers, roof top package units, forced air gas units and split system air condition systems and water heaters.&bull Must be able to resolve most multi-repeat problems.&bull Must perform clerical duties necessary to complete requests for service efficiently. MINIMUM REQUIREMENTS&bull Journeyman's license&bull Valid driver's license

Text henleyjobs to 23000 to start your application today!Are you looking to reach your full potential Do you enjoy meeting new people and working in a team environment If you are looking for a full-time career with excellent advancement opportunities, Henley Enterprises, Inc, the largest franchisee of Valvoline Instant Oil Change, is proud to offer you the tools necessary to succeed.We welcome all types of talent – no matter your background or experience. Wherever your confidence level is, we’ll make sure you’re trained in the services we offer including changing oil, check/filling vehicle fluids or inspecting/replacing lights and wipers. Our team of trainers are equipped to lead you through the path of self-made success. That’s why we do not require any experience in our service centers! It doesn’t matter if you’re a recent high-school grad, a well-seasoned professional looking for a change, a veteran transitioning back into civilian life or somewhere in the middle.THE TOOLS WE’LL PROVIDE TO YOU Paid on-the-job trainingNo late evenings – Most locations close by 7pm Competitive pay set at $19.75 per hourNow offering DailyPay! Have the flexibility to get paid dailyPromoting from within – 95% of upper-level management started out in an entry-level positionTuition ReimbursementEmployee Discount – 50% off most services for up to 2 vehiclesPaid vacation and holidaysMedical, Dental, Vision, and 401(k) Savings plan*Terms and conditions apply and benefits may differ depending on locationResponsibilitiesProvide exceptional customer service and address any concerns or questions.Perform oil changes, filter replacements, and lubrication services for vehicles.Inspect vehicles for any potential issues or areas that require attention.Conduct basic maintenance tasks such as tire rotations and fluid level checks.Basic computer knowledge/aptitudeKeep track of inventory and ensure all supplies are readily available.Maintain a clean and organized work environment.Follow safety protocols and guidelines to ensure a safe working environment.RequirementsAttention to detail and ability to follow instructions.Excellent problem-solving skillsStrong customer service and communication skillsAbility to work in a fast-paced environment and handle multiple tasks.Able to learn and follow the VIOC SuperPro process for all services.Achieve SuperPro certification.Must have reliable transportation.Essential FunctionsInspecting and replacing car lights and wipers.Check fluid levels and add fluids to vehicle when necessary.Inspect/replace engine air filter and cabin air filter.Add oil to engine in the proper amount based on specifications of vehicle make/model.Able to remove/rotate/lift/reinstall tires for tire rotation service.Lubricate necessary components of the chassis/driveline.Perform additional services on cooling systems and transmissions.Perform second checks by visually verifying and performing proper callouts to ensure all necessary services have been performed correctly.Able to move from bay to bay to perform services on multiple vehicles.Frequently ascends/descends stairs/catwalks/stepstools to retrieve vehicle parts (filters, wipers, etc.) or perform services top side or underneath the vehicle (drain oil, replace filter, differential services, lubrication)Able to work for extended periods of time with arms above your head when performing services underneath the vehicle on a catwalk.Constantly positions self to perform required services under the hood, related to tires, or on catwalk working underneath the vehicle.Able to move/transport items up to approximately 50 pounds.Able to work with tools to perform duties in tight sometimes hard to reach areas.Communicate verbally and receive verbal communication to ensure services are performed accurately, safely and in the proper order.EnvironmentIn this position you will be subject to environmental conditions. Activities occur inside and outside and in varying temperature conditions.In this position you will be subject to noise. There is sufficient noise to cause the worker to shout in order to be heard above ambient noise level.In this position you will be subject to hazards. Includes a variety of conditions including but not limited to proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat, and exposure to chemicals.In this position you will be subject to atmospheric conditions. One or more of the following conditions that may affect the respiratory system or skin: fumes, odors, dust, mists, gases, restricted ventilation.In this position you will be required to function in narrow aisles or passageways such as catwalks.The above description is not intended to be an "all-inclusive" list of the duties and responsibilities of the job described, nor is it intended to be such a listing of the skills and abilities required to do the job. Rather, it is intended only to describe the general nature of the job.Henley Enterprises, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.#BA0034#

Overview: Execute the installation of HVAC systems, hood systems, refrigeration systems, food service equipment, and shelving in new stores, rebuilds, and remodels. Install new equipment for rollouts of new menu items. Responsibilities: 1. Installation and troubleshoot refrigeration equipment, HVAC unit, duct work, food service equipment, hood systems and shelving according to action plan and quality standards. Balancing of HVAC systems, fryer hood, and dishwasher hood.2. Schedule and coordinate all equipment installation activities, in the absence of site leadership.3. Ensure all safety regulations are followed per federal, state, local, and Sheetz requirements.4. Be able to read, write, and follow instructions, such as blueprints, floor plans, wiring diagrams. Be able to hammer nails, use power tools, and distinguish colors.5. Complete accurate paperwork, including work orders, labor hours, warranty cards, equipment transfers, new store checklist, DOT logs, post trip vehicle inspections forms, and weekly transaction logs for procurement cards.6. Barcode and document equipment for tracking of warranties, analyzing reliability, maintenance issues, and technical support.7. Schedule and coordinate all equipment installation activities, in the absence of site leadership.8. Complete all assigned work in a timely, efficient manner, according to company standards. Qualifications: (Equivalent combinations of education, licenses, certifications and/or experience may be considered)Education• High School Diploma/GED required• Technical/Trade/Sheetz training requiredExperience• Minimum two years’ related experience requiredLicenses/Certifications• Valid Driver’s License• EPA certifications – license I and IITools & Equipment (Other than general office equipment):• Hand tools (hammer, measuring devices, wrench, level, etc.)• Power Hand tools (saws, drill press, grinders, sanders, etc.)• Welding tools (torch, plasma cutter, welder, etc.)• Motorized Equipment (generators, pressure washer, forklift, etc.)• Reclaimer, balometer Accommodations: Sheetz is committed to the full inclusion of all qualified individuals. Sheetz is committed to considering all applicants regardless of disability who can perform all essential job duties with or without accommodations.

Overview: MARKET LEADING PAY, PLUS BONUSESCollege Park Hyundai is part of the fast growing Group 1 Automotive, a leader in automotive retail sales and service.We are growing and looking for Automotive Service Technicians/Mechanicsto join our team!Our Service Technicians should be passionate about customer service, take pride in their work and enjoy being part of a winning team that cares about employees.The salary range for this position is between$20 - $50 per flag hour.We offer...Market Leading Pay, based on experience, Plus BonusesA Great Working Environment with the Latest EquipmentStructured, Self-paced and paid Training Opportunities Leading to Manufacturer and Group 1 RecognitionHealth, Dental & Vision InsuranceLife & Disability Insurance401(k) with Company MatchPaid Time offEmployee Vehicle Purchase ProgramEmployee Stock Purchase PlanPinnacle Awards ProgramYou needAutomotive Technician or Mechanic ExperienceA Positive & Friendly AttitudeTools based on your experienceCommunication SkillsBasic Computer SkillsAbility to Achieve Targeted GoalsHigh School Diploma or Equivalent Must have a Valid Driver’s License Group 1 is a Fortune 250 company that owns and operates automotive dealerships and collision centers in the United States and United Kingdom. We offer our associates a team environment, great benefits and ongoing training and support. If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail. Apply today or refer a qualified friend!*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment* Group 1 Automotive is an Equal Employment Opportunity employer.IND1