FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Please review the job details below.Maxar is looking for a versatile and innovative Maritime Systems Engineer to support an interesting and exciting project within the Intelligence Community.Project: The Systems Engineer will work as part of a cross-functional team comprised of technical experts supporting an established and growing Intelligence Community (IC) mission. You’ll analyze system requirements and concept of operations documents, acquisition plans, and system designs. As a SE on our team, you’ll use your experience to work with the testers, developers, engineers, and other experts from a wide range of stakeholder groups to evaluate hardware and software developed for integration onto assets. In this role, you'll have the opportunity to advise the government on strategic technical planning, project management, performance engineering, risk management and interface design for legacy and future sensor systems.Typical daily duties include:Identifying system requirements and working with a team to oversee system design, development, integration, and product verification testing at the component and system level.Participate in Technical Exchange Meetings on system integration, technical/programmatic issues, and risk management as needed or required.Support testing and test planning across the full range of the acquisition life cycle, providing subject matter expertise and technical support for proof of concept, developmental test, operational tests, and factory & acceptance tests.; gather documentation to support field exercises and coordinate with test ranges and support activities.Advocate for program performance that meets the requirements of government project leads, recommending future direction or projects to management.Interface with all aspects of the team to resolve system engineering issues and actions, to include: tracking user requirements and their translation into system requirements and specifications; providing expertise and direction in the development or modification of new capabilities; providing system engineering support and advice for system integration.Minimum Qualification: Must be a US citizen and have an active TS/SCI with CI Polygraph.Bachelor’s degree in an Engineering discipline (Computer Engineering, Mechanical Engineering or Electrical Engineering).6 years of professional experience working in systems engineering.Experience with embedded systems or robotics.Demonstrated ability to work effectively within a team of peers, as well as excellent interpersonal and communications skills.Ability to communicate highly technical analyses at a level comprehensible to non-technical audiences and senior-level government representatives.Experience working on-site at a customer location.Experience working in DOD/IC.Desired Qualifications: Master's Degree in Systems Engineering or experience with rapid prototyping and fielding projects.Experience developing Maritime systems.Advanced degree in an Engineering discipline.Experience following DAU Systems Engineering best practices.Practical RF systems knowledge gained through design, construction, or facilities management work experience.Military or defense-related experience and an understanding of operational planning and functional defeat of hard targets.DAWIA Level II or equivalent in the systems planning, research, development and engineering (SPRDE)-S&T functional areas.Demonstrated ability to work effectively within a team of peers, as well as excellent interpersonal and communications skills.Ability to communicate highly technical analyses at a level comprehensible to non-technical audiences and senior-level government representatives.Career: As a trusted partner, Maxar provides unmatched end-to-end advanced systems capabilities and integrated solutions expertise to help our customers anticipate and address their most complex mission-critical challenges with confidence. At Maxar, we are very serious about professional development and continuing education. We offer everyone the opportunity to define their own career trajectory. Our group has some amazing resources at our disposal specifically for this purpose. You will work with your direct supervisor and/or a mentor to set appropriate goals and design a plan to help you make consistent progress. Maxar offers an excellent comprehensive benefits package including medical, dental, life, and short/long-term disability insurance, Flexible Time Off (FTO), 401(k) retirement plan, flexible spending account, and tuition assistance. Maxar is an Equal Opportunity Employer.We also offer:Online learning platform access.Conference attendance.Corporate partner industry training.Communities of Practice/Peer groups.Paid certifications.Education reimbursement.Career growth opportunities.Family friendly benefits like maternity and paternity leave, adoption reimbursement, flexible hours, hybrid work options.Student loan repayment.Plus everything you’d expect from a leading employer such as a matching and immediately vest 401K plan, robust insurance coverage, medical, dental and vision, etc.#cjpostLI-CJ1In support of pay transparency at Maxar, we disclose salary ranges on all U.S. job postings. The successful candidate’s starting pay will fall within the salary range provided below and is determined based on job-related factors, including, but not limited to, the experience, qualifications, knowledge, skills, geographic work location, and market conditions. Candidates with the minimum necessary experience, qualifications, knowledge, and skillsets for the position should not expect to receive the upper end of the pay range.The base pay for this position within California, Colorado, Hawaii, and theWashington, DC metropolitan area is:$175,000.00 - $200,000.00For all other states, we use geographic cost of labor as an input to develop market-driven ranges for our roles, and as such, each location where we hire may have a different range. We offer a comprehensive package of benefits including paid time off, health and welfare insurance, and 401(k) to eligible employees. You can find more information on our benefits at:https://www.maxar.com/careers/benefitsThe application window is three days from the date the job is posted and will remain posted until a qualified candidate has been identified for hire. If the job is reposted regardless of reason, it will remain posted three days from the date the job is reposted and will remain reposted until a qualified candidate has been identified for hire.The date of posting can be found on Maxar’s Career page at the top of each job posting.To apply, submit your application via Maxar’s Career page.Maxar Technologies values diversity in the workplace and is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

ManTech seeks a motivated, career and customer-oriented Senior Cyber Network Engineer to join our team in Chantilly, Virginia. As a Sr. Cyber Network Engineer, you will be responsible for expanding network modeling of various vendor network devices, such as routers, switches, load balancers and firewalls as well as virtual network devices and cloud environments. Research various network devices’ features affecting “access” and create a proposal for modeling such features in RedSeal. As such, you will introduce new data streams from network devices into RedSeal’s analytics engine.Responsibilities include but are not limited to:Work closely with customers on onboarding, updates and troubleshooting issues with cybersecurity toolsProvides insight into efficiencies that can be gained from the current workflow based on an understanding of the customers’ requirementsWork with Engineers on troubleshooting and building proof-of-concept network topologiesAnalyze customer feedback to assist in process improvementPerforms engineering support and system administration of specialized cybersecurity applications and systems to include installation, configuration, maintenance, patching, and back-up/restoreProvides Tier 3 maintenance and engineering support for deployed cybersecurity technologiesIdentifies potential conflicts with implementation of any cybersecurity tools within the enterprise and develops recommendations to remediate these conflictsProvides ideas for automating repetitive project tasks and metrics collection through the use of scripts and assists with testing/implementation to productionMinimum Qualifications:Bachelor’s degree or 4+ years of experience in lieu of degree5+ years of related network experience (firewalls, routers, switches and load balancers)Knowledge of Windows and Linux systems, general operating system security practices, TCP/IP networking, and network security concepts is requiredKnowledge of and the use of AWS cloud technologiesMust have or be willing to obtain IAT Level II or higher certification within 6 months of hirePreferred Qualifications:Experience with programming languages such as Python, Go, Java, Java Script, Node.jsKnowledge of federal Cyber Security Guidance such as NIST SP 800-37 – Guide for Applying the Risk Management Framework (RMF) to Federal Information Systems and NIST 800-137 – Information Security Continuous Monitoring (ISCM) for Federal Information Systems and OrganizationsClearance Requirements:Must have a current/active TS/SCI w/PolygraphPhysical Requirements:The person in this position must be able to remain in a stationary position 50% of the time. Occasionally move about inside the office to access file cabinets, office machinery, or to communicate with co-workers, management, and customers, via email, phone, and or virtual communication, which may involve delivering presentations.

Bluehalo, an AV Companyis looking to hire exceptional and motivated talent who can both operate at scale and grow with the platform. At BlueHalo, we thrive at standing on the mission’s edge supporting missions that matter. We remain singularly focused on implementing our client’s vision and accelerating the execution of their goals providing cross cutting solutions in intelligence operations, identity management and data management. We have an amazing team, and we are looking for problem solvers, innovators, technologists, and operators looking to remain at the forefront of driving meaningful change and seeking to make an enduring impact on the national security mission. Make your mark standing at the mission's edge. Our Digital Forensics Engineer position is part of a dynamic team focused on delivering robust state of the art technical research and solutions for our customers. Successful candidates will have strong research, collaboration, and communication skills coupled with self-starting attitude and willingness to tackle highly challenging problems. Candidates should be comfortable performing highly technical and deep analysis on multimedia such as imagery, video, and audio files. WHAT YOU WILL DO Analyze metadata and other digital properties of multimedia files (i.e. images, videos, and audio) using reputable digital forensics industry tools and best practices for the purposes of determining a file’s potential origin (“provenance”), its processing history (“pedigree”), and any other characteristics that can be attributed to it.Leverage advanced digital forensic software and techniques across a variety of domains (i.e., pixel-level, metadata-level, binary-level) to support comprehensive multimedia analysis for the purpose of determining the likelihood a file was maliciously altered (otherwise described as assessing its potential “authenticity”).Employ the scientific method to conduct comprehensive research on assigned digital forensics topics and conduct independent research to overcome technical challenges.Use best practices for digital forensics investigations including techniques for proper identification, collection, preservation, analysis, and documentation of digital evidence.Conduct independent research/testing to acquire new skills and overcome technical challenges.Process, manipulate video/audio files (e.g., multiplexing, transcoding, stream copying, etc.) encoded across a variety of container formats (e.g., MP4, MKV, MOV, AAC, etc.) and compression standards (e.g., H.264, H.265) with tailored encoding parameters using commercial and/or open-source industry tools such as FFmpeg.Collaborate in a team-based environment to share knowledge, communicate progress on assigned tasks, solve technical challenges, and support the delivery of products that meet or exceed customer requirements.Conduct periodic quality control (QC) inspections of digital content.Produce and maintain detailed procedural documentation to enhance institutional knowledge and enable company developers to automate forensic processes.Maintain knowledge of emerging trends, techniques, and tools applicable to the digital forensics industry, including but not limited to rapid developments in the domain of synthetically generated multimedia.Collaborate with software engineers and testers to support the ongoing design, development, and quality assurance (QA) testing of customer-facing products. WHAT QUALIFICATIONS YOU WILL BRING This position requires US CitizenshipMore than 9 years working experience as a research engineerBachelor’s degree in engineering or relatedComprehensive understanding of the ISO base media file format (ISOBMFF) and other ISO/IEC container standards influence the structure, organization, and composition of common video file types such as MP4 and MOVGeneral understanding of anti-forensic techniques, tactics, and procedures that may be employed by actors attempting to hide evidence of deliberate alterations to multimediaFamiliarity with the general functionality of image editors such as Adobe Photoshop (Ps) and the GNU Image Manipulation Program (GIMP) CONCEPTS THAT SHOULD SEEM FAMILIAR TO YOU Photography principles and elements (e.g., ISO, exposure time, focal length, color space, etc.) to include how they affect the spatial domain and underlying characteristics of an image or videoForensics tools such as ExifTool, Hex Editors, Magnet Verify, FFmpeg, MediaInfo and Amped Authenticat BONUS POINTS IF YOU HAVE Experience with Jira for project managementBasic scripting language such as PythonGIAC - Battlefield Forensics and Acquisition (GBFA)GIAC - Advanced Smartphone Forensics Certification (GASF)ACIS - Certified Mobile Device ExaminerExperienceRequired9 year(s): Research Engineer EducationRequiredBachelors or better in Engineering or related fieldBachelors or better in Engineering Technology or related fieldLicenses & CertificationsRequiredNo ClearanceEqual Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network.Come join us to create what’s next. Let’s define tomorrow, together.DescriptionAt United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they’re well taken care of and ready to get our customers to their desired destinations. If you’re ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. Key Responsibilities: Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipmentRequires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervisionJourneyman electrical license a plusRequires the ability to make low and high voltage repairs to all building electrical equipmentThis includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devicesYou should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyorsFacilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditionsSchedules are bid and awarded according to seniorityFacilities Technicians are represented by the International Brotherhood of Teamsters (IBT)Salary increases will be administered according to the current IBT/United contractNew employees are required to join the union within ninety (90) days of employmentThere is an initiation fee for joining the union and subsequent monthly union dues which are set by the Local LodgeQualificationsUnited values diverse experiences, perspectives, and we encourage everyone who meets the minimum qualifications to apply. While having the “desired” qualifications make for a stronger candidate, we encourage applicants who may not feel they check ALL of those boxes! We are always looking for individuals who will bring something new to the table! What’s needed to succeed: Twenty Four months experience required in at least three of the following areas:Electrical (including 480 volt, 3 phase)Structural (including steel frame construction)HVAC (including building management systems)Mechanical (including conveyors)PlumbingPLC electronic/computer controlsMust have completed high school diploma, GED or equivalentAbility to maintain and repair all building disciplines, heavy mechanical and weldingWork may be indoors or outside or in elevated areas anywhere on airportMust be able to climb and work from ladders, and/or walk for extended periodsModerate liftingMust possess sufficient tooling to perform required tasksComputer experience for input and retrieval of dataQualified candidates must be immediately available for full time employmentMust possess a valid, clean, applicable state driver's license What will help you propel from the pack: Electronics diagnostics and troubleshooting United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contactto request accommodation.The starting rate for this role is $32.65.This is also a bonus eligible position (i.e. profit sharing).We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement).United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. Equal Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT.We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact to request accommodation.

Overview: Ready to drive financial accuracy and project success As a Project Engineer, you will track and analyze cost data, ensuring our projects stay on budget. Your expertise in resource monitoring and control, combined with your construction knowledge, will keep our projects running smoothly and efficiently.Apply now and transform your career with us. What you will be doing: Meet with engineering and field crews to review production schedule and confirm all materials, equipment and resources.Review all shop drawings, design specifications, material requirements and project data.Provides technical input for project work plan and scheduling.Identify risk elements of production, materials, equipment or process that could negatively impact the budget or schedule.Evaluate daily production, schedule and budget projections to accurately track project performance.Update project schedule weekly for owner and management reporting.Prepare and manage a three-week work plan. Notifies engineering and project management of any significant schedule changes and develops solutions to mitigate delays and cost.Initiate and manage all Requests for Information (RFIs).Remit accurate project quantities using assigned project cost coding to ensure project financials are accurately reported.Manage invoicing with accounting team regarding materials, equipment and subcontractor needs.Review certificates and permits needed to perform work.Review required Job Hazard Analysis (JHAs) to ensure a safe and compliance work environment for all construction personnel.Coordinates subcontractor work methods, schedule and crews as needed. What we are looking for: Bachelor's Degree in a related field. 7+ years construction engineering experience. Experience in resource monitoring techniques (i.e. cost accounting, basic estimating) and construction technology, process systems and/or structures preferred. Specialized, technical knowledge of design build or other alternative build techniques. Able to delegate and assign work to engineering team to progress the project production forward. Advanced knowledge of contract specifications and quality assurance practices. Able to identify budget and project costs and recommend options to mitigate project delays. Knowledge of financial reporting methods, quantity tracking methods and cost coding. Knowledge of construction scheduling and production time management preferred. Why work for us: Some of the benefits you may be eligible for as an employee are:Comprehensive compensation package and paid time off programIndustry leading 401(k)/RRSPMedical/Extended Health Care, Dental, Vison and/or Provincial MedicalWellness benefits & Employee Assistance ProgramTuition Reimbursement ProgramWe are an EEO/AA/ADA/Veterans employer. Salary Min: USD $105,000.00/Yr. Salary Max: USD $115,000.00/Yr.

General Summary of PositionJob Summary:MedStar Health is looking for a Stationary Engineer to join our team atMedStar Harbor Hospital!The Stationary Engineer willoperatethepower plant tosupply steam and hot waterandmaintainrequiredwater temperature on hot water systems. Maintains a suitable and safe climatic environment. Performs preventive or corrective maintenance on equipment.Join one of the largest healthcare systems in the Baltimore-Washington metro region, also recognized as one of the "Healthiest Maryland Businesses". Apply today and learn how MedStar Health can be your nextgreat careermove!Primary Duties:Diagnoses, repairs, and installs using blueprints, codes, specifications, and other industry standards.Keepsaccurateoperational logs of equipment in multiple buildings.Makerounds of machinery rooms, cooling towers, boiler rooms, and rooftops to perform visual inspections of equipment and verify its operation.Makes necessary water tests on converters and chillersand keeps assigned station clean and safe.Performs preventive and corrective maintenance on all HVAC equipment and other related machinery.Prepares boilers and related equipment for inspection andmaintainswater treatment by performing daily tests of all circulating open and closed loop systems and adding chemicals to achieve designated department standards.Qualifications:High School Diploma or GED.3-4 years’related experience.Engineer First Grade - SEL Maryland Stationary Engineer Grade 1 license required.Verbal and written communication skills.Basic computer skills preferred.This position has a hiring range of $33.86 - $57.13

Build your best future with the Johnson Controls team!Who We Are:YORK® Chiller Solutions from Johnson Controls, help customers respond to building efficiency needs by providing the widest variety water and air-cooled industrial and commercial chillers on the market. From reducing a facility’s carbon footprint, to delivering a healthier indoor environment and cutting energy costs, we build smaller, more energy efficient chillers tailored to fit almost any comfort or process cooling application – even heating. This role will be based in the Johnson Controls Advanced Development Engineering Center (JADEC) in New Freedom, PA. Candidates must be located within a commutable distance from the facility or be willing to relocate. Get excited!...take a look at where you'll work. Johnson Controls Advanced Development and Engineering Center (JADEC)What We Offer:Competitive salaryHybrid work opportunity (upon the completion of training)Paid vacation/holidays/sick timeComprehensive benefits package including 401K, medical, dental, and vision care– available day one!On the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat You Will Do:This position is within the water-cooled chiller product engineering team. We are seeking a senior engineer to work on chiller PLC control solutions for both new product and chiller retrofit opportunities. The role would focus on both software and hardware solutions for chiller PLC products. As Senior Engineer within our Chillers product development team, you will be responsible for electrical analysis, detailed design, and control, as well as overall electrical performance of sophisticated water-cooled chillers components and systems, including providing support to manufacturing and applications engineering. In this role you will work on control systems for new industrial chiller applications as well as retrofits, hardware design, design test and sustain control panels and system wiring.How You Will Do It:Develop and maintain electronic hardware and software (temperature sensors, pressure sensors, flow sensors, and A-B software).Design of analog and digital interface circuits, development of power supply circuits and/or selection of power supplies.Perform the worst-case circuit analysis and incorporation of appropriate reliability principles to ensure reliable operation over the environmental specifications.Assist chiller team to develop, test and support chiller system controls (This includes selection of system components and accurate interfacing of them to electronic control panel I/O). Acquire agency approvals such as UL, CE and FCC on Printed Circuit boards and Electronic Panels.Independently conduct and apply costing analysis to feasibility studies on proposed designs or modifications to existing designs.Develop schedules which accurately reflect the project breakthroughs and implement to them.Integrate new and modify existing processes to cover all phases of the electronic development process.Provide mentorship and support to:Drafters and DesignersService and Field TechniciansManufacturing on Commercial Systems products.Provide mentorship to drafters and support Service and Manufacturing on Commercial Systems products.Prepares and participates in design reviews.Learns and applies regulatory codes such as UL, NEC, CSA, and CE codes.Proficient at capturing and analyzing test data to identify electrical performance problems and propose solutions for corrections.What We Look For:RequiredBSEE,BSEET, BSEMET,or related fieldPreferred candidate to have 5 years of valid experience with one or more of the following.PLC programming and troubleshooting.HVAC systems and controls.Automation control systems.Electrical systems, wiring diagrams, and troubleshooting (24VDC, 120VAC, & 240VAC).Ability to work in a fast-paced, schedule driven, team-oriented environment.Ability to program and debug PLC programs.Ability to identify obsolete parts for PLCs, HMIs, Network switches and protocol translators for customer upgrades.Provides secondary level product support to the field after product technical support resources are exhausted for PLC applications.Experience with Allen Bradley PLCs and Rockwell software (rslinx, FactoryTalk, Studio 5000, Activation Manager, etc.).Good verbal and written communication skills are required.Must be willing and able to travel domestically and internationally as required (up to 10% of time).PreferredUnderstands chiller controls.Familiarity with HVAC Systems and motor driven mechanical engineering design and test, alternative experience with gas compression would be advantageous.Chiller PLC experience.#Hybrid#ElectricalEngineer

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: PRIMARY PURPOSE OF POSITIONT&S Substation Engineering & Standards is a multi-discipline unit focusing on Civil/Structural and High Voltage (HV) Electrical disciplines. The team supports in-house design, engineering, construction, and commissioning of electric substation projects initiated by growing load demand and replacement of aging infrastructure. Projects supported by the team include transmission substation modifications and expansions, distribution substation construction and expansions, Battery Electric Storage System (BESS) siting and construction, and replacement of aging or failed equipment.The successful candidate develops and/or leads teams in studies and evaluations of new properties, site development plans, design criteria, specifications, calculations, evaluations, cost estimates, and budget development associated with the planning, design, construction, commissioning, operation, and maintenance of Exelon's electric transmission, distribution and telecommunication facilities/systems. Provides consultation and recommendations to the Company within and to other business units and/or customers as a result of studying company or customer-owned systems, properties, equipment, or facilities. Reviews financial data from budget and actual costs of projects. Provides technical expertise to strategic, legislative and operational decisions. Participates in creating, updating, and applying internal/industry standards and technology in a specialized area of expertise. Trains and mentors' others. Position may be required to work extended hours for coverage during storms or other energy delivery emergencies. Primary Duties: PRIMARY DUTIES AND ACCOUNTABILITIESLeads and performs assignments in specialized areas requiring extensive engineering expertise. Requiring maintaining state of the art engineering credential in the specialized technical area. (25%)Leads and performs engineering tasks and projects associated with a critical or analytical engineering project or a small number of complex projects that require specialized knowledge in many areas, may include field testing troubleshooting, and peer review. (30%)Evaluates, develops, implements and leads projects that have significant financial and operational impact, may also develop initial commissioning plans. Plans, writes and performs tasks for documentation deliverables and projects (10%)Participates in department planning, through field/site walkdowns, attend meetings/conference calls, provide budget recommendations and monitor performance for the accomplishment of committed results. (5%)Performs assignments while acting independently, and may lead multi-discipline teams, may include providing direct oversight of contractors. (5%)Serves as an expert in specialized area. (5%)Acts as an expert witness or provide expert opinions as required. (5%)Provides recommendations to management and implements action plans to improve performance and cost effectiveness. (5%)Provides detailed technical training, mentorship, peer review, and/or guidance to others. (5%)Participates in technical and industry societies and committees to enhance knowledge of new technologies or issues in areas of company interest, make recommendations for business decisions regarding strategy for new technologies and/or engineering techniques and tools. (5%) Job Scope: JOB SCOPEInfluences project decisions having a significant impact on the company.Support/Lead employees and or contractors in the execution of plan development used to construct and energize utility or customer equipment/systems.Applies technical knowledge to help promote a safe work environment and to enhance customer satisfaction. Minimum Qualifications: MINIMUM QUALIFICATIONSBachelor of Science degree in Engineering or Licensed Professional Engineer (2) (3)Ability to analyze and interpret complex electrical and mechanical systems.Knowledge and ability to apply problem solving approaches and engineering theoryKnowledge of engineering designs, principles and practices.Knowledge of complex field test equipment.4-7 years of professional engineering experience (1) (3) (See Note).Broad knowledge and experience with regulations, guides, standards, codes methods, practices, and advanced engineering principles necessary to perform very complex or unique assignments for a specificMinimum of two related career experiences (4) (i.e., changes in technical job responsibilities, which may or may not include a change in department) OREngineer in Training OR50% complete (by hours) with advanced technical degree, M.B.A. or Project Management Certification(1) Master's degree in Engineering reduces the OJT experience requirement by 1 year. (2) License must be issued by the state in which you are practicing. (3) PE License reduces the OJT experience requirement by 1 year. (4) Career related experiences is defined as changes in technical job responsibilities and does not have to include a change in department Note: Items (1) and (3) are mutually inclusive, whereby the maximum experience requirement reduction is one(1) year (e.g., in the case of an employee with both a master's degree in Engineering AND a PE license, the minimum experience requirement would be reduced by one (1) year). Preferred Qualifications: PREFERRED QUALIFICATIONSBachelors degree in Civil Engineering, or a related field, with a focus on site/land development and/or storm water management system designLand development and permitting experience in Maryland’s Baltimore, Harford, Howard, and Anne Arundel Counties and in the City of Baltimore.Experience performing site and zoning analysis for commercial and industrial usesKnowledgeable in roadway design, utility systems, storm water management design, and site grading and balancing.Engineer in Training (EIT) in Maryland (2) (3)Strong teamwork, interpersonal skills and the ability to communicate with all management levels.Strong written and oral communication skills.A working knowledge of analysis software packages such as TR-55, Autodesk Civil 3D, Autodesk Inventor, MATLAB, etc.Ability to analyze industry wide trends and implement enhancements. Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $90,400.00/Yr. – $124,300.00/Yr. Annual Bonus for eligible positions: 15% 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

Are you a bold thinker We dream big at Sierra Nevada Corporationadvocating the exploration of space, keeping service members safe and creating the systems that keep our world united and sustain our way of living. Join our team! At Sierra Nevada Corporation (SNC) our Systems Engineers deliver customer-focused technology and best-of-breed integrations in the aerospace and defense sectors.The Mission Solutions and Technologies (MST) business area provides affordable, turn-key command/control, communications, integrated ISR, force protection and security solutions worldwide. The MST team has a long legacy of supporting the Department of Defense, Department of Homeland Security, commercial and international customers with years of experience in platform operations, engineering and full lifecycle management across domains – air, land, sea, space and cyber.Responsibilities:As a Systems Engineer, you will be using your skills and expertise to research, architect, model, simulate, test, certify and improve cutting edge products and services. You'll be developing complex system architectures within contextual modeling platforms, ushering them from operational concept through preliminary and detailed design, simulation, and test using progressive tools. As a cross-functional engineer, you are in charge of system-level ownership of new products and processes through the product lifecycle.Qualifications You Must Have:Bachelor's of Science degree in Computer Science, Software Engineering or other related discipline and typically 6 or more years of relevant experienceHigher education may substitute for relevant experienceUnderstanding of Computer Aided Engineering toolsPracticalknowledge of engineering principles and practicesExperience working in multi-disciplinary design and development teamsKnowledge of requirements management, functional requirements parsing, derivation, and allocation; systems design, systems integration, technical risk identification and management strategies, and Verification and Validation (V&V) principlesExperience with Customer engagements and decomposition of requirementsQualifications We Prefer:Ability to obtain a Top Secret with SCI eligibility U.S. Security ClearanceUnderstanding of industry standard software languages such as C, C#, C++, HTML, Java, Python, and BashExperience with software tools for requirements tracking, code reviews, static analysis, library and artifact repository, and automated buildKnowledge of software development methodologies such as Agile/Scrum, Waterfall, and SpiralExperiencedwith data structures #Ll-hybridSNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE: This position requires current/active Top Secret with SCI eligibility U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. Citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!SNC is an Equal Opportunity Employer committed to an environment free of discrimination.Employment decisions are made based on merit without regard to race, color, age, religion, sex, national origin, disability, status as a protected veteran or other characteristics protected by law.

Description Leidos is looking for a passionate Systems Engineer with hands-on experience in the TMPC Mission Distribution System (MDS) and the Weapons Control System. If you excel in the Systems Engineering Process and thrive on clear, effective communication, we want you on our team. Your knack for developing robust software test plans and navigating rigorous testing processes will directly impact future-forward defense solutions.What You’ll DoCollaborate and Innovate: Join a seasoned team of Systems Engineers and work closely to scrutinize requirements and execute test modifications, ensuring every detail aligns with meticulously defined standards.Own the Testing Cycle: From designing and developing software tests to troubleshooting, debugging, and enhancing mission-critical systems, you’ll be an integral part of the quality assurance process throughout the full testing life cycle.Analyze and Evolve: Dive deep into software requirements analysis, evaluate hardware compatibility, and build comprehensive test proceduresall while applying industry-leading principles, standards, and the latest tools to drive our software-intensive products forward.Operate in a DoD Environment: Bring your experience from DoD testing environments to bear, ensuring that every component of your work meets the high demands and rigorous quality expectations of defense technology.Basic Qualifications Must have BS degree with 2–4 years of relevant experience. Candidates with a Master’s degree and less than 2 years of experience are also encouraged to applyMust have current Top Secret clearance and the ability to obtain a Top Secret SCI security clearance.Preferred Qualifications: Experience with the Tomahawk Weapon System and familiarity with the Valid Platform List will set you apart and help you quickly integrate into our cutting-edge projects.At Leidos, you’ll not only be advancing your career in Systems Engineeringyou'll also be contributing to solutions that make a real-world impact. If you’re ready to step up to a role where your technical prowess and communication skills can shine on a grand stage, we’d love to hear from you.Let’s push the boundaries of innovation together; your journey to shaping the future of defense technology starts here.Original Posting:April 15, 2025For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $67,600.00 - $122,200.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Develop your engineering career at JLL!The Operating Engineer supports operation, inspection and maintenance processes to mechanical, HVAC, electrical and plumbing equipment and systems.You will work as part of an engineering team in Queenstown, MD.This position requires the Operating Engineer to be on-site. Local market requirements may vary slightly.WHAT YOU’LL DO Complete assigned tasks that include but are not limited to: painting, pressure washing, cleaning, maintaining lighting system bulbs/ballasts (as allowed by any licensing requirements), plumbing, HVAC systems, water treatment, hanging pictures, repair office furniture, locksmith work and general maintenanceMaintain work order system (CMMS) daily and complete any tenant service requestsMoves office furniture, machinery, equipment, and other materials as requestedPerform assigned preventive maintenance and inspection tasksSupport on-call or emergency response situations (if applicable)Troubleshoot all building systems, including electrical, DDC and pneumatic controlsComply with all safety proceduresParticipate in ongoing technical, safety, and operational process training programsOther projects and tasks to be assignedWHAT YOU BRING TO THE TABLE3+ years of related work experience, especially in repair, maintenance, HVAC, plumbing, electrical or carpentryTrade school education, union training, military service or college is desirableUniversal CFC EPA certification or interest in achieving within first year (with JLL assistance)Experience using Microsoft Office (Word, Outlook, Excel, Teams)Ability to lift up to 50 lbsComfort using ladders up to 30 feet tallAbility to frequently climb, bend, kneel, lift and/or driveStrong customer service skillsWHAT’S IN IT FOR YOUJoin an industry leader and shape the future of commercial real estateDeep investment in cutting-edge technology to power your workComprehensive and competitive benefits planA supportive, caring and diverse work environment designed for your growth and well-being#PMR1

Type of Requisition:RegularClearance Level Must Currently Possess:Top Secret SCI + PolygraphClearance Level Must Be Able to Obtain:Top Secret SCI + PolygraphPublic Trust/Other Required:NoneJob Family:Systems EngineeringJob Qualifications:Skills:Complex Systems, Information Technology (IT) Systems, Linux, Systems Design, Systems EngineeringCertifications:NoneExperience:10 + years of related experienceUS Citizenship Required:YesJob Description:The Senior Systems Engineer IV shall be responsible forparticipating in Information Assurance (IA) system, hardware, and software design activities with focus on leading evaluation of requirements generation, allocation and tracking throughout the development cycle to ensure supportability for security certification. The Senior Systems Engineer IV shall also be responsible for performing implementation and technology studies. Key Responsibilities:Provide identification and fixing of problems within existing systems, design, and implementation of new systems and enhancement of existing systems.Participates in analysis, design, and new construction of next generation IT systems.Responsible for understanding the needs of the customers and the realities of commercially available IT products and creating requirements that will allow implementation by the development team.Perform systems engineering activities and assist in the preparation of a work products in Technical Process Area associated with the ISO/IEC 15288Perform systems engineering activities and assist in the preparation of multiple work products inPerform analysis of technical alternatives for a project and make preliminary recommendations.Independently analyze and recommend alternatives for elements of project’s technical designs.Supervise or coordinate the work of other contractor engineers or technicians on a project.Analyze and propose appropriate engineering standards and process for a project.Assist in conducting an evaluation to determine its suitability for project implementation.Assist in developing a new or innovative approach to a technical or engineering issue.DESIRED SKILLS:Experience as a system engineer on one or more IT platforms is preferred.Must have a solid technical background with a focus on IT systems.Skills with Telecommunication (TCP/IP, OIS/CMIP/X25), operating systems (Windows, UNIX, LINUX), NetApp-VMWare, database/DBMD (oracle, access, sybase) and applications (Tivolli, Peoplesoft).Familiarity with ITIL, SEI/CMM is desirableRed Hat Certified System Administrator (RHCSA)WHAT YOU’LL NEED:Must have one of the following DoD approved certifications to meet the category/level IAT-2 (DoD 8570) requirement for this position: Security+, GSEC, SSCP, CCNA-Security, CISA, CISSP (or Associate), CASP, GCIH, or GCED.Required Education & Experience: High School/GED (+12) years of relevant experience. AD (+10) years of relevant experience. BA/BD (+6) years of relevant experience. Master's degree (+4) years of relevant experience, or PHD (+2) years of relevant experience.The likely salary range for this position is $155,803 - $210,790. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:NoneTelecommuting Options:OnsiteWork Location:USA MD LaurelAdditional Work Locations:Total Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.Join our Talent Community to stay up to date on our career opportunities and events atgdit.com/tc.Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

About LumenLumen connects the world. We are igniting business growth by connecting people, data and applications – quickly, securely, and effortlessly. Together, we are building a culture and company from the people up – committed to teamwork, trust and transparency. People power progress.We’re looking for top-tier talent and offer the flexibility you need to thrive and deliver lasting impact. Join us as we digitally connect the world and shape the future.The RoleThe Lead IT Systems Engineer - Federal will provide Tier 3 support and serve as a technical expert for the Customer sponsored Optical Network & Data Communications Network (DCN) and Internet Protocol (IP) backbone integral to the management of the network. The Network Engineer will reside on site.The Main ResponsibilitiesDevelops and supports the transition plans associated with these activities and support laboratory-enabled execution activities – protection of the Optical Network & DCN will require analysis of vulnerabilities.Assumes operation and maintenance responsibility for the optical network – includes setup, configuration, and writing of scripts to ensure regular backup images are created.Manage all aspects of network operations related to performance and fault management. Essential functions include the following:Provide technical support for network and system installation and maintenance.Coordinate with configuration management and implementation teams.Monitor network operations and security posture.Maintain network status and trouble logs.Identify and diagnose network problemsIdentify network elements causing network degradation or failure.Determine and execute corrective actions on a real-time basis.Execute reporting functions and data input associated with network management.Evaluate trend analyses.Identify network performance improvement opportunities and forward recommendations to engineering for analysis.Routinely evaluate the network baseline to identify and resolve unplanned changes to the baseline.Manage the network operations Quality Control (QC) program.Provide functional guidance, technical support, and training to network operations staff.What We Look For in a CandidateSkills:Ability to interface in a professional manner with management and customer is essential.Flexibility with regard to work levels and shift accommodation is imperative.Education and Experience:Bachelors degree in Engineering, Electronics, Software, or Networks, or a related technical or vocational education or equivalent experience.Six or more years applicable work experience.Demonstrated experience with SONET based, metro fiber networks, next-generation DWDM systems, FLEX and IP based systems.Previous experience with broadband circuit maintenance/restoration, provisioning databases and circuit activations.Previous experience and ability to relate technical issues to management and Government personnel.Prior experience with Nortel, Cisco suite of optical network equipment and network management systems.Security Requirements:US Citizenship required.Active TS/SCI with Poly.Must maintain eligibility requirements for access to classified information (applicants selected will be subject to a government security re-investigation).Other Requirements:Must have a valid driver’s license have a clean driving record.Some local travel required.CompensationThis information reflects the anticipated base salary range for this position based on current national data. Minimums and maximums may vary based on location. Individual pay is based on skills, experience and other relevant factors.Location Based Pay Ranges:$114,082 - $152,109 in these states: VA.Lumen offers a comprehensive package featuring a broad range of Health, Life, Voluntary Lifestyle benefits and other perks that enhance your physical, mental, emotional and financial wellbeing. We're able to answer any additional questions you may have about our bonus structure (short-term incentives, long-term incentives and/or sales compensation) as you move through the selection process.Learn more about Lumen's:BenefitsBonus Structure#LI-DN1Requisition #: 337630Background ScreeningIf you are selected for a position, there will be a background screen, which may include checks for criminal records and/or motor vehicle reports and/or drug screening, depending on the position requirements. For more information on these checks, please refer to the Post Offer section of our FAQ page. Job-related concerns identified during the background screening may disqualify you from the new position or your current role. Background results will be evaluated on a case-by-case basis.Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.Equal Employment OpportunitiesWe are committed to providing equal employment opportunities to all persons regardless of race, color, ancestry, citizenship, national origin, religion, veteran status, disability, genetic characteristic or information, age, gender, sexual orientation, gender identity, gender expression, marital status, family status, pregnancy, or other legally protected status (collectively, “protected statuses”). We do not tolerate unlawful discrimination in any employment decisions, including recruiting, hiring, compensation, promotion, benefits, discipline, termination, job assignments or training.DisclaimerThe job responsibilities described above indicate the general nature and level of work performed by employees within this classification. It is not intended to include a comprehensive inventory of all duties and responsibilities for this job. Job duties and responsibilities are subject to change based on evolving business needs and conditions.In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.Please be advised that Lumen does not require any form of payment from job applicants during the recruitment process. All legitimate job openings will be posted on our official website or communicated through official company email addresses. If you encounter any job offers that request payment in exchange for employment at Lumen, they are not for employment with us, but may relate to another company with a similar name.Application Deadline05/16/2025

The Amazon Devices team designs and engineers high-profile consumer electronics, including the best-selling Kindle family of products. We have also produced innovative devices like Fire tablets, Fire TV, Amazon Dash, and Amazon Echo. What will you help us create Work hard. Have fun. Make history. The Role We are looking for a talented and passionate Embedded Software Engineer to be part of an exciting team. You will have an enormous opportunity to make a large impact on the design, architecture, and implementation of leading edge products used every day, by people you know. In this role, you will be responsible for system architecture and development of new features for embedded systems across multiple product and technology spaces (Alexa devices, IoT devices, etc.). You will join a team whose mission is to ensure that state-of-the-art technologies that serve the customer can be supported via flexible software architectures, OS and Hardware Platform abstraction, testability, and scalability across multiple device types. You will dive into an ambiguous problem spaces and meticulously distill out design choices, trade-offs, and priorities. You will Investigate, prototype and deliver new and innovative system solutions, participate in design reviews, API development, and documentationYou love to share best practices, influence and align teams, and be a technical ambassador for software reuse across the wider Amazon organization.BASIC QUALIFICATIONS- 6+ years of non-internship professional software development experience- 6+ years of programming with at least one software programming language experience- 6+ years of leading design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience as a mentor, tech lead or leading an engineering teamPREFERRED QUALIFICATIONS- 6+ years of full software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations experience- Bachelor's degree in computer science or equivalentAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

Entity: Customers & ProductsJob Family Group: Sales GroupJob Description: Join bp as Technical Engineer, HPL/G - C&P Castrol!About role itself:The technical engineering role provides engineering expertise and value selling support to Sales based on breadth of technical knowledge and extensive experience in the Industrial market. This role will support field-based technical Service needs.The technical engineer plays a meaningful role in developing and detailing the value proposition for new customer sales opportunities. Additionally, this role will support preventing the loss of existing business that comes under competitive threat.Key Accountabilities:Demonstrate Safety Leadership and ensure HSSE perfection is achieved & maintainedServe as industrial application expert, supporting internal and external customersActively support division sales teams in the acquisition of new businessDevelop and provide high quality technical training to internal and external partnersWork with sales to provide proven, efficient, and timely solutions to customers’ process and product application issues using sound problem solving techniquesWork with Technology and Marketing to support new product development and provide feedback of product performance in the fieldWork with Global Product managers to provide inputs on product front from the local market and identify needs and requirementsDocument and share standard methodologies in case studies highlighting the benefits derived from Castrol products and servicesConduct field testing of new and reformulated Castrol Industrial products & servicesSupport wider business objectives by participating or leading projects as needed to enable delivery of the Industrial strategyAct as mentor and trainer to salespeople and engineers with less experienceAnalyse Used Oil Analysis reports and comment as needed to enable informed decision makingEducationBachelor’s degree in engineering or equivalent – Mechanical, Chemical, Lubrication, Manufacturing, or another relatedExperienceMinimum of 5 years industrial technical experienceMust be technically savvy and experienced in using Microsoft Office Suite, Sales CRM (i.e. Salesforce), and other sales/engineering related toolsExpertise in Metalworking fluids and High-Performance Lubricants along with related field applications across many customers market segmentsStrong value selling and external social skillsKnowledge and understanding in sustainability (energy savings, water reuse, net zero, etc.) preferredSkilled in the use of structured problem-solving techniquesWe are an equal opportunity employer and value diversity at our company. We do not discriminate based on race, religion, color, national origin, gender, sexual orientation, age, marital status, veteran status, or disability status.We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, perform crucial job functions, and receive other benefits and privileges of employment.Please send your CV in English!Travel RequirementUp to 50% travel should be expected with this roleRelocation Assistance:This role is not eligible for relocationRemote Type:This position is a hybrid of office/remote workingSkills:Commercial Acumen, Commercial performance, Consultative selling skills, Customer Profitability, Customer value proposition, Digital fluency, Internal alignment, Listening, Managing strategic partnerships, Negotiation planning and preparation, Offer and product knowledge, Partner relationship management, Sector, market, customer and competitor understandingLegal Disclaimer:We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status.Individuals with an accessibility need may request an adjustment/accommodation related to bp’s recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process,pleasecontact us.If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Bank of America or JPMorgan Chase among other leading organizations in the Baltimore area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Business Operations - Project Management - Banking - Customer Success - IT Support - Data Analytics Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.

Please review the job details below.Unlock your future with Maxar! WeneedHigh-Performance Computing (HPC) DevSecOps Engineer with LINUX and OpenShift or Kubernetes expertise to lead the charge in migrating and managing our services. We’ve got an exciting new effort happening to modernize and shift our existing system to brand new hardware and we’d love some extra hands. Join our tight-knit ops, software, and analytics team, where yourskillsand mission-focused mindset will play a pivotal role in crafting solutions to enable others. Dive into a project that not only challenges you but allows direct interaction with users and technologists that assistin national security operations.Note: US citizenship and an active TS/SCI clearance is mandatory for this position and required for consideration. Must be open to acquire CI Poly.Location:Herndon, VA or Westminster, COPrincipal Responsibilities:Create and maintain automated, repeatable environment creation and configuration (Infrastructure as Code) scripts using ansible, chef, or similar toolsLeverage OpenStack and Kubernetes to configure, monitor, and maintain this private cloud environmentCreate and maintain automated DevSecOps pipelines using leading open-source offerings, including Jenkins, SonarQube, Cucumber, JMeter, and Cypress.ioMonitor, Predict, Update, and Resolve issues at all levels, from bare-metal operating systems to deployed applicationsSupport compliance to ATO accreditation needs with tuning, patching or documentation,Communicate with multidisciplinary SAFeAgile teams and articulate technical concepts and ideas effectively.Position Requirements8+ years of technical experience with DevSecOps and strong Linux experience required.4 years of experience with HPC (High Performance Computing)4 yearsof Openshift and/or KubernetesOpen source and custom application deployments and maintenance experience.Capable of working effectively with a geographically distributed ops & development teamCommunicates effectively with customers and team in written and oral forumsWillingness to work 80% or as needed in a SCIF environment.Degree or equivalent demonstrated experience in a technical field.Active TS/SCI clearance and US citizenshipAdditional Skills DesiredSome familiarity in the following other areas would be fabulous:An adaptable and solution centric mindset that embraces technology enablers.Experience with:hardware and software sustainment with IC and DoD networks.distributed processing methods and tools, such as REST APIs, microservices, IaaS/PaaS services.developing and deploying web servicesworking with open-source resources in a government computing environmentMaintaining backend GIS technologiesICD 503Big data technologies such as Accumulo, Spark, Hive, Hadoop, or ElasticSearchFamiliarity with:hybrid cloud/on-prem architecture, AWS, C2S, and OpenStack.concepts such as Data visualization; Data management, Data integration, User Interfaces, DatabasesCompTIA Security+ or comparable certification for privileged user access.Experience in/or supporting military/intelligence or knowledge of some TCPED systems is a plus!#cjpost#LI-RDIn support of pay transparency at Maxar, we disclose salary ranges on all U.S. job postings. The successful candidate’s starting pay will fall within the salary range provided below and is determined based on job-related factors, including, but not limited to, the experience, qualifications, knowledge, skills, geographic work location, and market conditions. Candidates with the minimum necessary experience, qualifications, knowledge, and skillsets for the position should not expect to receive the upper end of the pay range. The base pay for this position within Colorado is: $119,000.00 - $199,000.00 annually. The base pay for this position within the Washington, DC metropolitan area is: $131,000.00 - $219,000.00 annually.For all other states, we use geographic cost of labor as an input to develop market-driven ranges for our roles, and as such, each location where we hire may have a different range. We offer a comprehensive package of benefits including paid time off, health and welfare insurance, and 401(k) to eligible employees. You can find more information on our benefits at:https://www.maxar.com/careers/benefitsAdditionally, this position is incentive eligible with a target based on contribution, company performance, and/or individual results achieved; the specific incentive plan and target amount will be determined based on the role and breadth of contributions.The application window is three days from the date the job is posted and will remain posted until a qualified candidate has been identified for hire. If the job is reposted regardless of reason, it will remain posted three days from the date the job is reposted and will remain reposted until a qualified candidate has been identified for hire.The date of posting can be found on Maxar’s Career page at the top of each job posting.To apply, submit your application via Maxar’s Career page.Maxar Technologies values diversity in the workplace and is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

ManTech seeks a motivated, career and customer-oriented Principal Cyber Security Engineer to join our team in Chantilly, VA. Responsibilities include but are not limited to:Engineer, design, implement, integrate, and sustain Comply-to-Connect (C2C) deployment support to migrate, deploy, improve, and maintain C2C services. Comply-to-Connect support is comprised of managing and maintaining the appliances, applications, servers, and supporting infrastructure on unclassified and classified environments.Coordinate with the network service provider to develop and maintain network architecture diagramsEvaluate and recommend changes and/or technology upgrades to address performance, standardization, and industry best practicesMonitor and investigate C2C performance and faults and recommend improvements.Interacts with other team members and customers at multiple levels to gather, supply, or coordinate informationSupports Assessment and Authorization activities related to cybersecurity technologies, where applicableMinimum Qualifications:Bachelor’s degree or 4+ years of additional cyber experience in lieu of degree7+ years of cyber experienceExperience with technologies involved in large scale enterprise deployments/data centersExperience with deploying and/or supporting enterprise security software products such as firewalls, IPS, Anti-Virus solutions, application firewalls, high availability solutions, network management systems, virtual systemsKnowledge of Windows and Linux systems, general operating system security practices, TCP/IP networking, 802.1x and network security concepts is requiredIAT Level II (GSEC, Security+, SSCP, or CCNA-Security) certification or ability to obtain within 6 months of hirePreferred Qualifications:Experience implementing and using complicated software products that involve multiple componentsExperience with vendor agnostic C2C capabilities and services, open-source components and trends, DoD integration and networks, and DoD engineering and sustainment procedures and processes to deliver real time C2C enterprise-level expertise to the customer base a plusExperience with Cisco Identity Services Engine (ISE)Knowledge of Shell, Perl and XML ScriptingExperience with tools such as Nmap, Nessus, and tcpdumpClearance Requirements:Must have a current/active TS/SCI w/PolygraphPhysical Requirements:The person in this position must be able to remain in a stationary position 50% of the time. Occasionally move about inside the office to access file cabinets, office machinery, or to communicate with co-workers, management, and customers, via email, phone, and or virtual communication, which may involve delivering presentations.

Overview: Ready to drive financial accuracy and project success As a Project Engineer, you will track and analyze cost data, ensuring our projects stay on budget. Your expertise in resource monitoring and control, combined with your construction knowledge, will keep our projects running smoothly and efficiently.Apply now and transform your career with us.Click here to find out how Adrian Price, Preconstruction Manager, grew his engineering career here. What you will be doing: Meet with engineering and field crews to review production schedule and confirm all materials, equipment and resources.Review all shop drawings, design specifications, material requirements and project data.Provides technical input for project work plan and scheduling.Identify risk elements of production, materials, equipment or process that could negatively impact the budget or schedule.Evaluate daily production, schedule and budget projections to accurately track project performance.Update project schedule weekly for owner and management reporting.Prepare and manage a three-week work plan. Notifies engineering and project management of any significant schedule changes and develops solutions to mitigate delays and cost.Initiate and manage all Requests for Information (RFIs).Remit accurate project quantities using assigned project cost coding to ensure project financials are accurately reported.Manage invoicing with accounting team regarding materials, equipment and subcontractor needs.Review certificates and permits needed to perform work.Review required Job Hazard Analysis (JHAs) to ensure a safe and compliance work environment for all construction personnel.Coordinates subcontractor work methods, schedule and crews as needed. What we are looking for: Bachelor's Degree in a related field. 5+ years construction engineering experience. Experience in resource monitoring techniques (i.e. cost accounting, basic estimating) and construction technology, process systems and/or structures preferred. Specialized, technical knowledge of design build or other alternative build techniques. Able to delegate and assign work to engineering team to progress the project production forward. Advanced knowledge of contract specifications and quality assurance practices. Able to identify budget and project costs and recommend options to mitigate project delays. Knowledge of financial reporting methods, quantity tracking methods and cost coding. Knowledge of construction scheduling and production time management preferred. Why work for us: Some of the benefits you may be eligible for as an employee are:Comprehensive compensation package and paid time off programIndustry leading 401(k)/RRSPMedical/Extended Health Care, Dental, Vison and/or Provincial MedicalWellness benefits & Employee Assistance ProgramTuition Reimbursement ProgramWe are an EEO/AA/ADA/Veterans employer. Salary Min: USD $100,000.00/Yr. Salary Max: USD $130,000.00/Yr.

General Summary of PositionJob Summary:Under the general direction of the Clinical Engineering leadership team, the Imaging Specialist II is primarily responsible for tasks associated with the installation, testing, maintenance, calibration and repair of medical equipment and systems. Maintaining clinical equipment and systems considered to be advanced, specialty, highly sophisticated, integrated technology, or requiring manufacturer service training or certification, through the effective use of the medical equipment management plan, while adhering to all medical equipment policies and procedures, and manufacturer or alternative equipment maintenance (AEM) specifications. Primary Duties and ResponsibilitiesResponds to advanced support requests. Diagnoses, resolves and closes issues involving high value, complex medical equipment and systems according to service level guidelines. Services complex, specialty, highly sophisticated diagnostic imaging technology and systems. Takes part in on-call rotation, covering after-hours and weekends.Ensures that preventative maintenance is promptly performed accordingly to the established schedule. Makes daily rounds within the hospital and advanced/specialized modality areas to assure proper operation of medical equipment and systems while correcting any deviations.Orders parts, receives, inventories, assembles, inspects, and tests equipment and documents results. Coordinates efforts with supervisor and/or experienced technicians or specialists as appropriate.Inspects and tests electronic, electromechanical, and mechanical medical and scientific equipment according to specific test procedures. Verifies equipment safety and accuracy for continued use.Documents all work performed in the computerized maintenance management system (CMMS). Ensures documentation is accurate, complete and timely. Provides monthly reports as needed.Provides clear, concise, and timely follow up with colleagues, ensuring they know the status of work being performed on their equipment. Provides technical in-service or instruction to facility staff in proper operation of patient care equipment on an as-needed basis.Provides advanced support of acuity equipment for direct patient care.Reviews department/unit operations manual to ensure compliance with applicable Joint Commission standards, federal and state regulations, accepted Standards of Conduct, and the Corporate Compliance Program. Complies with all MedStar Health Policies and Procedures, Corporate Compliance Program Standards of Conduct, and all applicable statutes, rules, and regulations.Maintains orderliness and cleanliness of work areas. Maintains department facilities, equipment and materials in a condition that promotes efficiency, health, comfort and safety of patients and staff.Anticipates needs of the department, proactively suggests improvement ideas to simplify processes and assists in policy or procedure implementation. Provides information for the development of policies, procedures and records to fulfill or exceed regulatory requirements.Participates in service training of technicians concerning use and operation of equipment.Researches and makes recommendations for new medical equipment and provides support through the installation process. Completes initial inspections and completes required paperwork.Schedules and performs preventive maintenance inspections on medical devices and completes all associated paperwork in a timely and accurate manner. Is knowledgeable of applicable safety and electrical limits for healthcare equipment. May travel between various system sites or provides phone support if required. Reports problems to the Manager at the local sites if needed.May act as a Liaison between Clinical Engineering and other departments related to Medical Equipment, and other multidisciplinary systems.In conjunction with the Director of Clinical Engineering may be responsible for budget preparation and monitoring of operational/capital budget cost. May assist in evaluation, selection and installation of new equipment/systems.May oversee activities of vendors in all phases of installation and implementation of systems. Maintains effective working relationships with other departments and participates in multi-disciplinary operations, quality and service improvement teams. Minimum QualificationsEducationAssociate's degree Biomedical equipment technology, electronics or related field required or related military work/training in mechanical or electrical engineering or academic work or actual work experience aligned with AAMI's Core Competencies for the Biomedical Equipment Technician. required Experience3-4 years Experience in the repair and maintenance of diagnostic imaging technology and systems. required Licenses and CertificationsCBET - Certified Biomedical Equipment Technician Upon Hire required or must be actively pursuing CBET and obtain within 2 years required orCertified Radiology Equipment Specialist (CRES) Upon Hire required or must be actively pursuing CRES and obtain within 2 years required Knowledge, Skills, and AbilitiesAbility to anticipate tasks and prioritize assignments.Ability to input data into computer programs.Ability to travel between sites to maintain diagnostic imaging technology and systems.Ability to work with all levels of internal and external customers.Knowledge of basic electricity/electronics principles. Knowledge of hospital and department procedures and operations.Knowledge of word processing, spreadsheet and database software.Provides hospitable customer service.Skill in the use of basic and specialized hand tools and testing equipment.Well-developed verbal and written communication skills.Knowledge of Joint Commission and other regulatory agency's accreditation requirements. This position has a hiring range of $33.86 - $63.13

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

What You Will Do:We would like you to perform electrical project engineering functions that include, but are not limited to, design of packaged equipment control and wiring systems, processing orders, cost estimating, establishing standards, and interfacing with customers. This position is not eligible for Visa sponsorship.***Preference given to candidates residing in or within a commutable distance from Waynesboro, PA***How You Will Do It:Various application, estimating and project assignments.Selecting and/or specifying controls and wiring for compressors and associated rotating equipment.Designing and/or specifying control panels and motor switchgear including electromechanical panels, microprocessor panels, PLC and DCS based system panels.Performing engineering calculations such as power consumption, control transformer sizing, instrument loop impedances, etc.Sketching ladder logic, logical flow and/or instrumentation diagrams and rudimentary panel layouts using PC based drawing programs. (AutoCAD preferred).Providing guidelines for the design of control panels, junction boxes and conduit/wiring systems in accordance with the National Electric Code (NEC).Writing inquiries, specifications, and requisitions for purchased equipment.Checking drawings and writing installation/operation and maintenance instructions.Reviewing orders and specifications to identify technical cost options, comments, clarifications, and exceptions.Interfacing with customers daily, both internal and externalAttending meetings, both at our facility as well as customer facility. Traveling on a limited basis.Conferring with project engineering personnel as well as manufacturing personnel.Work on various projects at different stages at the same time.What We Look For:Bachelor’s degree in electrical engineering from a four-year college or university or related experience and/or training in packaged industrial electrical control and wiring systems.1-3 years of experience as an engineerKnowledge of Microsoft office including Word and Excel.PreferredExperience with AutoCADConstruction experienceWhat We Offer:Competitive salaryPaid vacation/holidays/sick timeComprehensive benefits package including 401K, medical, dental, and vision care -Available day one!On the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policy#JCIEarlyCareers#projectengineer

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: PRIMARY PURPOSE OF POSITIONTransmission and Substation Engineering & Standards is a multi-discipline unit focusing on High Voltage (HV) Electrical, System Protection & Control (SPC) and Civil/Structural (CV) disciplines. The team supports internal and external design, engineering, construction, and commissioning of electric substation projects initiated by growing load demand and replacement of aging infrastructure. Projects supported by the team include transmission substation modifications and expansions, distribution substation construction and expansions, and replacement of aging or failed equipment.The Principal Engineer/Subject Matter Expert (SME) possesses specialized knowledge and experience in the design, selection, installation, and maintenance of critical substation equipment, such as, Circuit Breakers, Capacitors, Switchgear, Gas Insulated Switchgear, Battery Energy Storage Systems, STATCOM, etc... The candidate will have experience in the design & execution of complete high voltage transmission and distribution substations, with relevant projects on applications that range from 4kV to 500kV.The successful candidate develops and/or leads teams in studies, plans, design criteria, specifications, calculations, evaluations, cost estimates, budgets, associated with the planning, design, construction, operation, and maintenance of Exelon's electric, transmission, distribution, and telecommunication facilities/systems.Provides consultation and recommendations to the Company within and to other business units and/or customers as a result of studying company or customer-owned systems, properties, equipment, or facilities. Reviews financial data from budget and actual costs of projects. Provides technical expertise to strategic, legislative, and operational decisions. Participates in creating, updating, and applying internal/industry standards and technology in a specialized area of expertise. Trains and mentors’ others. Position may be required to work extended hours for coverage during storms or other energy delivery emergencies. Primary Duties: PRIMARY DUTIES AND ACCOUNTABILITIESLeads and performs assignments in specialized areas requiring extensive engineering expertise. Requiring maintaining state of the art engineering credential in the specialized technical area. (25%)Leads and performs engineering tasks and projects associated with a critical or analytical engineering project or a small number of complex projects that require specialized knowledge in many areas, may include field testing troubleshooting, and peer review. (30%)Evaluates, develops, implements and leads projects that have significant financial and operational impact, may also develop initial commissioning plans. Plans, writes and performs tasks for documentation deliverables and projects (10%)Participates in department planning, through field/site walkdowns, attend meetings/conference calls, provide budget recommendations and monitor performance for the accomplishment of committed results. (5%)Performs assignments while acting independently, and may lead multi-discipline teams, may include providing direct oversight of contractors. (5%)Serves as an expert in specialized area. (5%)Acts as an expert witness or provide expert opinions as required. (5%)Provides recommendations to management and implements action plans to improve performance and cost effectiveness. (5%)Provides detailed technical training, mentorship, peer review, and/or guidance to others. (5%)Participates in technical and industry societies and committees to enhance knowledge of new technologies or issues in areas of company interest, make recommendations for business decisions regarding strategy for new technologies and/or engineering techniques and tools. (5%) Job Scope: JOB SCOPEInfluences project decisions having a significant impact on the company.Support/Lead employees and or contractors in the execution of plan development used to construct and energize utility or customer equipment/systems.Applies technical knowledge to help promote a safe work environment and to enhance customer satisfaction. Minimum Qualifications: MINIMUM QUALIFICATIONSMaster of Science degree in Engineering or Licensed Professional Engineer.Ability to analyze and interpret complex electrical and mechanical systems.Knowledge and ability to apply problem solving approaches and engineering theory.Knowledge of engineering designs, principles and practices. 8+ years of experience in specific areas of engineering and recognized industry expert (Requirement reduced by one year for Licensed Professional Engineer) Advanced knowledge and experience with regulations, guides, standards, codes, methods, practices, and advanced engineering principles. Advanced knowledge of latest technologies necessary to perform a variety of specialized unique or complex assignments for various installation types of services. Industry expert who participates or leads industry committee or working groups or has published technical documents Note: there are a limited number of personnel available in the industry with the required knowledge, ability and experience. License must be issued by the state in which you are practicing Preferred Qualifications: PREFERRED QUALIFICATIONSStrong teamwork, interpersonal skills and the ability to communicate with all management levels.Strong written and oral communication skills.Strong background in Forensic Analysis and ability to conduct investigations, identify patterns, and help derive actionable insights from complex datasets.A working knowledge of analysis software packages such as ASPEN, CDEGS, Autodesk, Autodesk Inventor, MATLAB, etc.Ability to analyze industry wide trends and implement enhancements. Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $120,000.00/Yr. – $165,000.00/Yr. Annual Bonus for eligible positions: 20% 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

Sierra Nevada Company's Mission Systems and Operations (MSO) Business Unit is seeking an Engineering Manager to lead our Systems Engineering, Integration, and Test (SEIT) team. The successful candidate will be responsible for leading and growing a multi-disciplinary team to ensure the effective design, integration, and testing of complex systems. This role requires a strategic thinker with strong leadership skills, a solid technical background, and the ability to collaborate across engineering disciplines to deliver high-quality systems that meet customer requirements.The Mission Solutions and Technologies (MST) business area provides affordable, turn-key command/control, communications, integrated ISR, force protection and security solutions worldwide. The MST team has a long legacy of supporting the Department of Defense, Department of Homeland Security, commercial and international customers with years of experience in platform operations, engineering and full lifecycle management across domains – air, land, sea, space and cyber.Responsibilities:Lead and manage the SEIT team within the MSO Business Unit, including Systems Engineers, System Security Engineers, Network Engineers, and Test Engineers.Oversee the development and implementation of systems engineering processes, tools, and methodologies tailored to aircraft integration and modification.Ensure effective requirements analysis, system design, integration planning, and testing strategies.Coordinate with cross-functional teams to ensure seamless integration of subsystems and components.Develop and maintain project plans, schedules, and budgets for SEIT activities within MSO.Provide technical guidance and mentorship to team members to foster professional growth.Conduct regular reviews and audits to ensure compliance with quality standards and engineering best practices.Identify and mitigate risks associated with system design, integration, and testing.Communicate project status, technical issues, and risk management plans to senior leadership and stakeholders.Support business development activities by providing technical input and expertise during proposal development and customer meetings.Support proposal activities, including the development of engineering basis of estimates (BOEs) and technical volumes.Qualifications You Must Have:Bachelor's of Science degree in a related disciplineTypically, 8+ years of progressive engineering experience, which includes 4+ years of management experience.Thorough understanding of systems engineering principles, methodologies, and best practices.Proven experience in managing complex systems integration and testing projects, preferably within the defense or aerospace sectors.Excellent project management skills, including the ability to develop and manage schedules, budgets, and resources.Strong analytical and problem-solving abilities.Effective communication and interpersonal skills, with the ability to work collaboratively with cross-functional teams.Experience with Model-Based Systems Engineering (MBSE).Knowledge of industry standards and regulations related to systems engineering and testing.The ability to obtain and maintain a Top Secret U.S. Security Clearance is required Qualifications We Prefer:Previous management experience; exposure to recruiting employees; assigning, directing, and evaluating their work; and overseeing the development and maintenance of staff competenceExperience with identifying and coordinating resources to ensure the required tools, processes, and training are available/effective and programs are staffed and supported to achieve successUnderstanding of how to prepare project schedules, budgets, bids, and estimates for proposed program work packagesBackground in the Aerospace and Defense Industry, the US Department of Defense or US MilitaryExperience with commercial derivative aircraftAbility to motivate/work with othersPrior exposure to working successfully in a highly collaborative, fast-paced environment emphasizing rapid prototyping and fielding of capabilities, with minimal supervisionProficiency with Microsoft ProjectEstimated Starting Salary Range: $150,009.28 - $206,262.76. Compensation varies depending on a wide array of factors, such as candidates' key skills, relevant work experience, and education/training/certifications. The disclosed range estimate may be adjusted for any applicable geographic differential associated with the location at which the position may be filled.SNC offers annual incentive pay based upon performance that is commensurate with the level of the position.SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE:This position requires the ability to obtain and maintain a Top Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. Citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!SNC is an Equal Opportunity Employer committed to an environment free of discrimination. Employment decisions are made based on merit without regard to race, color, age, religion, sex, national origin, disability, status as a protected veteran or other characteristics protected by law.

Type of Requisition:RegularClearance Level Must Currently Possess:Top Secret SCI + PolygraphClearance Level Must Be Able to Obtain:Top Secret SCI + PolygraphPublic Trust/Other Required:NoneJob Family:Systems EngineeringJob Qualifications:Skills:Enterprise Technologies, SIEM Tools, Splunk (Inactive)Certifications:NoneExperience:2 + years of related experienceUS Citizenship Required:YesJob Description:SIEM Team – Splunk Systems EngineerDeliver simple solutions to complex problems as a SIEM Team – Splunk Systems Engineer at GDIT. Here, you’ll tailor cutting-edge solutions to the unique requirements of our clients. With a career in application development, you’ll make the end user’s experience your priority and we’ll make your career growth ours.At GDIT, people are our differentiator. As a SIEM Team – Splunk Systems Engineer you will help ensure today is safe and tomorrow is smarter. Our work depends on Systems Engineer joining our team.The Digital Services SIEM Team requires an experienced Splunk System Administrator to system engineer to perform all aspects of Splunk Enterprise and ITSI administration, maintenance, and operation of global enterprise solution used for complex Splunk applications, dashboards and reports. Duties include: monitoring Splunk infrastructure system health and data feeds; install, and configuration of Splunk Indexers, Forwarders, Deployment Servers and Search-Heads; onboarding new data; supporting cybersecurity and operations teams and driving complex Splunk dashboard deployments/reports and working side by side with the customers to solve their unique problems across a variety of use casesHOW A SYSTEMS ENGINEER WILL MAKE AN IMPACT Ensure the Splunk infrastructure functions properly with PKI-based authentication, corporate authorization services, firewalls, and SSL/TLS communications. Contribute to development and ongoing improvement of industry best practices and standards for maintaining data analytics enterprise technologies. Assist with installing, testing, and deploying hotfixes/patches for Splunk app/product releases to manage enterprise vulnerabilities. Assist with development of knowledge articles, documentation, and work instructions used by the Splunk, server, desktop and Information System Security teams, and Tier 2/3 Help Desk technicians.WHAT YOU’LL NEED TO SUCCEED: Education: Bachelor of Arts/Bachelor of Science Required Experience: 2+ years of related experience Security Clearance Level: TS/SCI w/Poly Required Skills and Abilities: Experience managing user authentication within Splunk to include Role and Attribute Based Access Controls (RBAC\ABAC), authentication with Lightweight Directory Access Protocol and Active Directory (LDAP\AD), and managing access via HEC tokens is highly preferred. Experience implementing and managing Apps within Splunk is highly preferred. Preferred Skills: Experience reviewing network, host and firewall security logs, experience with using scripting languages such as CSS, HTML, JavaScript, Python, and shell scripting to automate tasks and manipulate data, experience managing integrations with technical add-ons with a relevant experience integrating DBConnect, Experience with Splunk Machine Learning Toolkit (MLTK), solid knowledge of RMF, Trellix ePO, NESSUS, SCAP, and vulnerability scanning is highly preferred, expert understanding in data analytics, Hadoop, MapReduce, visualization is a plus, programming experience PowerShell or Python is a plus, Experience using ServiceNow ticketing system, broad operations or development experience is a plus, Strong organization, communication, and collaboration skills and be customer-focused and results oriented. Location: On Site US Citizenship Required 40 hours/week; Day-shift, M-F work hours; available for after hours on call. DoD 8750 Minimum: Security+ OR Network+ CertificationGDIT IS YOUR PLACE: 401K with company match Comprehensive health and wellness packages Internal mobility team dedicated to helping you own your career Professional growth opportunities including paid education and certifications Cutting-edge technology you can learn from#GREENWAY#ITPolyMDThe likely salary range for this position is $102,000 - $138,000. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:Less than 10%Telecommuting Options:OnsiteWork Location:USA MD Annapolis JunctionAdditional Work Locations:Total Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.Join our Talent Community to stay up to date on our career opportunities and events atgdit.com/tc.Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

About LumenLumen connects the world. We are igniting business growth by connecting people, data and applications – quickly, securely, and effortlessly. Together, we are building a culture and company from the people up – committed to teamwork, trust and transparency. People power progress.We’re looking for top-tier talent and offer the flexibility you need to thrive and deliver lasting impact. Join us as we digitally connect the world and shape the future.The RoleThe Senior Engineer will lead and participate in multiple team environments and to provide independent efforts to all aspects of system integration including design, needs analysis, design review, testing, implementation, and validation. As a highly technical and hands-on position, the Sr Engineer will be responsible for systems in support of Lumen’s Government and commercial managed security services platforms addressing .gov and critical infrastructure protection missions.The Lead Engineer position will require both technical expertise and project management competency. Will be located at a Government location.Provide on-site support for Government NOC M-F, (0600 -1200)The Main ResponsibilitiesProvide necessary coordination, support and technical assistance to the Customer NOC to enable situational awareness of all customer services within Lumen.The engineer will serve as the interface between Lumen and Government POC regarding planned and unplanned maintenance events, incident response by identifying which Lumen transport circuits are impacted by an event.Attend daily Government meetings and provide information on maintenance activities and impact on the Government NetworkProvide NOC support to apply Lumen transport expertise to ensure trouble ticket accuracy.Develop strong relationships with colleagues and stakeholders to enhance teamwork, trust and transparency.Experience in analyzing problems to determine root cause and implementation of corrective actions is required.Must be able to provide accurate written and verbal communication. Ability to provide the proactive status of assigned work, ability to estimate the level of effort for future work and accomplish tasks with minimal guidance.Strong communication and critical thinking skills with the ability to work in collaborative environment.What We Look For in a CandidateEducation and Experience:Bachelors degree or equivalent education and experience.Security Requirements:TS/SCIMust meet eligibility requirements for access to classified information (applicants selected will be subject to a government security investigation)7+ years of related experience.Strong Communication skills.Proficiency in Microsoft Office (Word, Excel, Visio, PowerPoint).PMP Certification is a plus, but not required.Must have a current valid driver’s license.CompensationThis information reflects the anticipated base salary range for this position based on current national data. Minimums and maximums may vary based on location. Individual pay is based on skills, experience and other relevant factors.Location Based Pay Ranges$91,266.00 - $121,688.00 in these states: VALumen offers a comprehensive package featuring a broad range of Health, Life, Voluntary Lifestyle benefits and other perks that enhance your physical, mental, emotional and financial wellbeing. We're able to answer any additional questions you may have about our bonus structure (short-term incentives, long-term incentives and/or sales compensation) as you move through the selection process.Learn more about Lumen's:Benefits*Bonus Structure#LI-DN1Requisition #: 335967Background ScreeningIf you are selected for a position, there will be a background screen, which may include checks for criminal records and/or motor vehicle reports and/or drug screening, depending on the position requirements. For more information on these checks, please refer to the Post Offer section of our FAQ page. Job-related concerns identified during the background screening may disqualify you from the new position or your current role. Background results will be evaluated on a case-by-case basis.Pursuant to the San Francisco Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.Equal Employment OpportunitiesWe are committed to providing equal employment opportunities to all persons regardless of race, color, ancestry, citizenship, national origin, religion, veteran status, disability, genetic characteristic or information, age, gender, sexual orientation, gender identity, gender expression, marital status, family status, pregnancy, or other legally protected status (collectively, “protected statuses”). We do not tolerate unlawful discrimination in any employment decisions, including recruiting, hiring, compensation, promotion, benefits, discipline, termination, job assignments or training.DisclaimerThe job responsibilities described above indicate the general nature and level of work performed by employees within this classification. It is not intended to include a comprehensive inventory of all duties and responsibilities for this job. Job duties and responsibilities are subject to change based on evolving business needs and conditions.In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information.Please be advised that Lumen does not require any form of payment from job applicants during the recruitment process. All legitimate job openings will be posted on our official website or communicated through official company email addresses. If you encounter any job offers that request payment in exchange for employment at Lumen, they are not for employment with us, but may relate to another company with a similar name. Application Deadline05/16/2025

Description The NISC IV program at Leidos is seeking an Military Frequency Engineer to join our engineering team. In this role, you will be responsible for the design, analysis, and optimization of systems that involve electromagnetic spectrum usage. The ideal candidate will have a strong background in RF (Radio Frequency) engineering, signal processing, and spectrum management, with a focus on ensuring compliance with regulatory standards. The engineer will work closely with regulatory bodies, engineering teams, and project managers to support spectrum-related initiatives across various projects.Must be able to obtain a Public Trust Security Clearance Suitability (To be eligible, one must be either a U.S. Citizen OR a U.S. Permanent Resident/Green Card holder who has resided in the U.S.A for the past 3 years.)All new hires must pass a drug test prior to starting with Leidos.Primary Responsibilities:Using aeronautical charts and FAA database/software analysis tool, conduct operational characterization and engineering analysis of the DoD mission requests for use of the spectrum bands.Review and coordinate military tactical data link network (Link16) requests and exercise requests.Ensure requests and assignments meet FAA compatibility criteria for operation within the national airspace and process accordingly.Manage spectrum allocation and usage, ensuring compliance with FCC and other international regulatory bodies.Stay updated with the latest spectrum technologies and trends to continuously improve system performance.Provide support in the deployment of RF systems, including site surveys, system integration, and troubleshooting.Develop technical documentation, including system design, test plans, and performance reports.Perform spectrum analysis and interference mitigation to optimize system performance.Collaborate with cross-functional teams to ensure that designs meet industry standards and regulatory requirements.Conduct testing and validation of RF systems, antennas, and other wireless communication devices.Basic Qualifications: Must have an active Secret security clearance.Bachelor’s degree in electrical engineering or related field plus 8 to 12 years of relevant experience.3+ years of experience in RF engineering, spectrum analysis, or a similar field.Hands-on experience with spectrum analyzers, network analyzers, and RF testing equipment.Knowledge of FCC regulations and international spectrum management policies.Strong understanding of electromagnetic theory, signal propagation, and antenna design.Proficiency in software tools such as MATLAB, HFSS, CST, or similar.Excellent problem-solving skills and attention to detail.Strong communication and teamwork skills.Strong problem-solving skills with the ability to work independently and within a team environment.Excellent communication skills, both written and verbal.Preferred Qualifications:Master’s degree in electrical engineering or related fieldRadio Spectrum Management experience is highly desiredCertification in RF or spectrum management (e.g., FCC, iNARTE, etc.).Prior experience, such as Spectrum coordination of Link-16 TFAs, EMCF certification of Link-16 terminals, or Link-16 LPDS are highly desiredFamiliarity with spectrum sharing, dynamic spectrum access, or cognitive radio technologies.Please note: The selected candidate will be required to commute to the FAA facility in Washington, DC at least 3 to 5 times out of the year.Original Posting:April 17, 2025For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $104,650.00 - $189,175.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

The Amazon Device OS team is looking for high-energy, detail-oriented, and technically-savvy Support Engineers to triage defects/tickets raised by testing teams, on Amazon’s devices.You begin to play a leadership role on your team by becoming a subject matter expert on one or more services. You own support activities for these services and regularly work with development teams to establish and improve service support. You operate with limited guidance from management and drive issues to resolution. You understand the business logic and architecture of your supported services that enable you to regularly resolve undocumented trouble tickets. You are able to read and understand complex application code and make approved code fixes to resolve support issues. You provide mentoring, training, documentation, and tools to other Support Engineers to enable them to perform support activities. You regularly contribute to the creation and improvement of all support documentation. You may perform code builds and deployments communicating status regularly before, during, and after each deployment. You create and interpret metrics that measure support success and service performance. You help develop and refine operational policies and procedures used by your team and internal customers. You work on support projects that are large in scope and lead other Support Engineers on smaller projects. You participate fully and constructively in the planning of your team’s work. You have the ability to write simple and efficient tools to improve operational efficiency. You contribute to design and development of support tools using software engineering best practices. You mentor other Support Engineers and are involved in hiring.Key job responsibilitiesSome of the key job functions of a Support Engineer III, involved in defect triaging are:• Provide first level of support for handling Jiras, tickets, operational issues from production services• Provide engineering support of our incoming Jiras, tickets, including extensive troubleshooting and debugging, with responsibilities covering multiple product lines. • Hands-on experience in Unix or any scripting language• Will work with limited guidance and will act as a SME on the services owned• Understand the business logic and architecture of your supported services that enable you to regularly resolve undocumented trouble tickets• Understand complex application code and make approved code fixes to resolve support issues. • Interface with other teams to resolve defects and show strong ownership of issues• Become very familiar with the use of monitoring dashboards and applications, and use them to determine service issues.• May perform code builds and deployments communicating status regularly before, during, and after each deployment• You may Audit the work of Support Engineer Is and your peers, identify key areas and work with the team to eliminate the gaps• Make changes to existing scripts with code reviews and come up with new tools/ scripts to reduce manual efforts• Help develop and refine operational policies and procedures used by your team and internal customers. • Requires detailed understanding of the components or features of the product owned. Drives changes with data and contributes to the overall success of the team/project• Have the ability to write simple and efficient tools to improve operational efficiency. • Evaluate the training needs for your team, regularly work with development teams, with QA/ TPM stakeholders, and other Support Engineers to improve documentation, procedures, and tools• Communicate clearly and effectively with stakeholders. Always tend to over-communicate and over-documentA day in the lifeTypically SE will provide operational and initial debugging support to CI (continuous itegration)/SCM Dev Teams. Team investigates failures that may arise during the CI Process (Build, Flash, Test) in the CI Live and CI STU environments. Additionally, in the CI STU (Safe to Use) environment, SE is responsible for developing rules for tests that apply STU promotions on software builds, as well as identifying and debugging any issues that may arise during the CI STU test runs and managing promotions on SW builds.BASIC QUALIFICATIONS- 2+ years of software development, or 2+ years of technical support experience- Experience scripting in modern program languages- Experience troubleshooting and debugging technical systemsPREFERRED QUALIFICATIONS- Knowledge of web services, distributed systems, and web application development- Experience troubleshooting & maintaining hardware & software RAID- Experience with REST web services, XML, JSONAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Bank of America or JPMorgan Chase among other leading organizations in the Baltimore area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Business Operations - Project Management - Banking - Customer Success - IT Support - Data Analytics Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.

Please review the job details below.Unlock your future with Maxar! We are on the lookout for a savvy DevSecOps Engineer with LINUX and OpenShift or Kubernetes expertise to lead the charge in migrating and managing our services. We’ve got an exciting new effort happening to modernize and shift our existing system to brand new hardware and we’d love some extra hands. Join our tight-knit ops, software, and analytics team, where your methodical approach and mission-focused mindset will play a pivotal role in crafting solutions to enable others. Dive into a project that not only challenges you but allows direct interaction with users and technologists that assist in national security operations. This is a full-time onsite position; hybrid/remote options not available.Note: US citizenship and an active TS/SCI clearance is mandatory for this position and required for consideration. Must be open to acquire CI Poly.Location: Herndon, VAPrincipal Responsibilities:Administer, troubleshoot, and tune new and existing Openshift and/or Kubernetes deployments. Standup automated pipelines and assist team with deploying containerized code/applications into a Kubernetes cluster. Design and apply hybrid strategy (cloud and local virtualized) for existing and future architecture needs.Troubleshoot and resolve operational network, pipeline, and infrastructure issues. Support compliance to ATO accreditation needs with tuning, patching or documentation,Communicate with multidisciplinary SAFe Agile teams and articulate technical concepts and ideas effectively.Position Requirements:8+ years of technical experience with DevSecOps and strong Linux experience required. 4 years Openshift and/or Kubernetes Open source and custom application deployments and maintenance experience.Capable of working effectively with a geographically distributed ops & development team Communicates effectively with customers and team in written and oral forumsWillingness to work 80% or as needed in a SCIF environment. Degree or equivalent demonstrated experience in a technical field.Active TS/SCI clearance and US citizenshipAdditional Skills DesiredSome familiarity in the following other areas would be fabulous:An adaptable and solution centric mindset that embraces technology enablers.Experience with:hardware and software sustainment with IC and DoD networks.distributed processing methods and tools, such as REST APIs, microservices, IaaS/PaaS services.developing and deploying web servicesworking with open-source resources in a government computing environmentMaintaining backend GIS technologiesICD 503Big data technologies such as Accumulo, Spark, Hive, Hadoop, or ElasticSearchFamiliarity with:hybrid cloud/on-prem architecture, AWS, C2S, andOpenStack.concepts such as Data visualization; Data management, Data integration, User Interfaces, DatabasesCompTIA Security+ or comparable certification for privileged user access.Experience in/or supporting military/intelligence or knowledge of some TCPED systems is a plus!#cjpost#LI-RDIn support of pay transparency at Maxar, we disclose salary ranges on all U.S. job postings. The successful candidate’s starting pay will fall within the salary range provided below and is determined based on job-related factors, including, but not limited to, the experience, qualifications, knowledge, skills, geographic work location, and market conditions. Candidates with the minimum necessary experience, qualifications, knowledge, and skillsets for the position should not expect to receive the upper end of the pay range. The base pay for this position within the Washington, DC metropolitan area is: $131,000.00 - $219,000.00 annually.For all other states, we use geographic cost of labor as an input to develop market-driven ranges for our roles, and as such, each location where we hire may have a different range. We offer a comprehensive package of benefits including paid time off, health and welfare insurance, and 401(k) to eligible employees. You can find more information on our benefits at:https://www.maxar.com/careers/benefitsThe application window is three days from the date the job is posted and will remain posted until a qualified candidate has been identified for hire. If the job is reposted regardless of reason, it will remain posted three days from the date the job is reposted and will remain reposted until a qualified candidate has been identified for hire.The date of posting can be found on Maxar’s Career page at the top of each job posting.To apply, submit your application via Maxar’s Career page.Maxar Technologies values diversity in the workplace and is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law.

ManTech seeks a motivated, career and customer-oriented Senior Principal Azure Cloud Engineer to join our team in Chantilly, VA.Responsibilities include but are not limited to:Work with Azure cloud services and infrastructure and knowledge of Infrastructure as Code (IaC) tools like Terraform or ARM templates.Troubleshoot and resolve cloud infrastructure issues.Implement Azure security best practices and Windows and Linux server management.Use Azure data services and containerization technologies and DevOps tools such as Azure DevOps, Jenkins, and GitHub. Proficient in scripting languages such as PowerShell, Python, or Azure CLI.Help with network security groups (NSGs) and application gateways.Work with Azure services including compute, storage, networking, and databases.Provide knowledge of security best practices and compliance standards, Excellent problem-solving skills and communication and collaboration skills.Minimum Qualifications:Bachelor’s degree in computer science, Information Technology, a related field or 5+ years of additional Azure Cloud experience in lieu of degree5+ years of experience in cloud computing with a focus on Microsoft Azure.Experience with designing and implementing Azure-based solutions with Experience in DevOps practices and tools (e.g., Azure DevOps, Jenkins, Git) and infrastructure as code tools like ARM templates, Terraform, or Ansible.Experience with Azure Resource Manager templates, BICEP, or similar cloud templates, GitHub Enterprise, GitLab, Azure DevOps, architecture frameworks like TOGAF or Zachman or other code repositories experience.Experience with PowerShell, Bash, Python, YAML, JSON or Ansible for automationMinimum DoD 8570 IAT Level 2 certification required (CCNA Security, GICSP, GSEC, Sec+, CND, SSCP) or DoD 8570 Computing Environment certification within 6 months of hirePreferred Qualifications: Master’s degreeKnowledge of containerization technologies such as Docker and Kubernetes with experience with other cloud platforms (e.g., AWS, Google Cloud Platform).Knowledge of Federal Information Processing Standards (FIPS)-199, NIST SP 800-53, NIST SP 800-53A, NIST SP 800-37, and DoD Cloud Security Requirements Guide.Microsoft Certified Azure Administrator Associate, Microsoft Certified Azure Security Engineer Associate, Microsoft Certified Solutions Expert Cloud Platform and Infrastructure, or Azure Solutions Architect ExpertClearance Requirements:Must have a current/active TS/SCI w/PolygraphPhysical Requirements:The person in this position must be able to remain in a stationary position 50% of the time. Occasionally move about inside the office to access file cabinets, office machinery, or to communicate with co-workers, management, and customers, via email, phone, and or virtual communication, which may involve delivering presentations.

General Summary of PositionJob Summary:Perform complex preventive maintenance and corrective repair of buildings, industrial systems, vehicles, equipment, and grounds. Working under limited supervision, monitors building system operations and performance. Utilizes several trade skills such as carpentry, plumbing, electrical, painting, roofing, heating, and cooling.Join one of the largest healthcare systems in the Baltimore-Washington metro region, also recognized as one of the "Healthiest Maryland Businesses". Apply today and learn how MedStar Health can be your next great career move!Primary Duties:Complies with all applicable codes, regulations, governmental agency, and Company directives related to building operations and work safety.Oversees and inspects the work performed by outside contractors. Contracted work includes landscaping, snow removal, remodeling, HVAC, plumbers, and cleaning.Inspects building systems including fire alarms, HVAC, and plumbing to ensure operation of equipment is within design capabilities and achieves environmental conditions prescribed by client.Performs assigned repairs, emergency, and preventive maintenance. Completes maintenance and repair records as required.Reviews assigned work orders. Estimates time and materials needed to complete repair. Orders necessary materials and supplies to complete all tasks.Maintains the building lighting system, including element and ballast repairs or replacements an performs welding, carpentry, furniture assembly and locksmith tasks as needed.Maintains an energy management program to ensure measures are taken to operate all systems in the most efficient manner to keep operating costs at a minimum and responds quickly to emergency situations, summoning additional assistance as needed.Qualifications:High School Diploma or GED required.Minimum of four years of related experience and/or trade school training required.Engineer 2nd Grade - ENG 2NDG Maryland State 1st or 2nd Class Stationary Engineer License required.CFC Refrigeration Certification Universal CFC certification required.This position has a hiring range of $30.67 - $54.48

Build your best future with the Johnson Controls team!Who We Are:YORK® Chiller Solutions from Johnson Controls, help customers respond to building efficiency needs by providing the widest variety water and air-cooled industrial and commercial chillers on the market. From reducing a facility’s carbon footprint, to delivering a healthier indoor environment and cutting energy costs, we build smaller, more energy efficient chillers tailored to fit almost any comfort or process cooling application – even heating. Candidates must be commuting distance to New Freedom, PA, or willing to relocate.Take a look at where you'll work! Johnson Controls Advanced Development and Engineering Center (JADEC)What You Will Do:This position is within the water-cooled chiller contract engineering team. We are seeking a hands-on engineer to work on contract chiller sales orders, and interface with our design team as needed. This role will focus on providing wiring diagrams, panel diagrams, instrumentation, and possibly system wiring components.How You Will Do It:As Electrical Engineer within our Chillers product development team, you will be responsible for electrical analysis, detailed design, and control, as well as overall electrical performance of sophisticated water-cooled chillers components and systems, including providing support to manufacturing and design and drafters. In this role you will work on providing wiring diagrams, panel diagrams, instrumentation (BOMs), ECNs, and possibly system wirings in time. This position is not eligible for Visa sponsorship.What We Look For:RequiredBS in Electrical Engineering, or EMET and or related science.Minimum 3 years’ experience (BS degree) in a related field and directly handling Hazardous Environments jobs.Ability to read, understand, and create electrical and control schematicsAbility to troubleshoot and debug electrical and control circuitsUnderstanding of process and machine control fundamentalsAbility to manage details of technical requirements including task assignments, tracking and communicationsAbility to create electrical schematics and panel design layoutsAbility to manage workload effectively (planning, organization, communication of tasks)Strong teamwork skills (will be part of multidisciplinary teams working major developments)Knowledgeable around different Comms Protocols (RS485, RS232, Ethernet)Experience with CAD tools and 3D modeling (AutoCAD and CERO or SolidWorks)Experience creating Harness & Power Distribution DrawingsExperience with Hazardous Environments and the requirements needed for Electrical designs and safety requirements. (Class 1, DIV 1; and Class 1, DIV 2)Preferred:Refrigeration system knowledge (chillers, heat pumps, etc.)Mechanical aptitude (connection to the "system" they're controlling)Experience with creating BOMsGood trainer in CAD tools (inexperienced employee(s) could benefit from partnering with this candidate)ERP Experience (SAP preferred)P&ID ExperienceCreo Cabling Experience#ElectricalEngineer#LI#Hiring

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: PRIMARY PURPOSE OF POSITION Develops and/or leads teams of employees or contractors in studies, plans, criteria, specifications, calculations, evaluations, design documents, integrated systems analysis, associated with the testing, commissioning, planning, design, licensing, construction, operation, and maintenance of Exelon's electric generation, transmission, distribution, gas, telecommunication, P&C communication, facilities/systems. Provides consultation and recommendations to the Company within and to other business units and/or customers as a result of studying company or customer-owned systems, processes, equipment, or facilities. Acts as recognized technical authority in a specialized engineering area which may involve witnessing of Factory Acceptance Tests. Position may be required to work extended hours for coverage during storms or other energy delivery emergencies. Primary Duties: PRIMARY DUTIES AND ACCOUNTABILITIESLeads highly technical consultation and training through OJT/OJE (may include some class room instruction as well) on highly complex and unique technical areas requiring the application of advanced engineering principles and may require advanced knowledge of complex analog and digital field test equipment. (25%)Evaluates complex technical issues that require highly specialized knowledge in very specific areas and recommends actions or programs for their resolution which may necessitate the review/evaluation of engineering design documents. (25%)Leads the work activities of project teams and others on the implementation of large specialized technical projects and/or programs in order to develop studies, proposals, commissioning plans to support safely energizing and placing major utility and customer systems and equipment On System. (25%)Participates in technical and industry societies and committees to enhance knowledge of new technologies or issues in area of company interest. (10%)Participates in department/project management planning, and monitor performance for the accomplishment of committed results. (10%)Acts as an expert witness and provide expert opinions for internal committees. (5%) Job Scope: JOB SCOPEHighly influential on strategic management decisions that can have a major impact on the company. Support/Lead employees and or contractors in the execution of plans developed to initially energize utility or customer equipment/systems and placed On System.Set direction for the organization in regards to technical issues.Applies technical knowledge to help promote a safe work environment and to enhance customer satisfaction Minimum Qualifications: MINIMUM QUALIFICATIONSBachelor's degree in Engineering discipline with at least 7 years of professional engineering experience. (1) (3) (See Note)Completed Assignments and Projects showing evidence of:Ability to analyze and interpret complex electrical and mechanical systems.Knowledge and ability to apply problem solving approaches and engineering theory.Knowledge of engineering designs, principles and practices.Advanced knowledge and experience with regulations, guides, standards, codes, methods, practices, and advanced engineering principles (2).Advanced knowledge of latest technologies necessary to perform a variety of specialized unique or complex assignments for various installation types of services. *Note: there are a limited number of personnel available in the industry with the required knowledge, ability and experience. (1) Master's degree in Engineering reduces the OJT experience requirement by 1 year. (2) License must be issued by the state in which you are practicing. (3) PE License reduces the OJT experience requirement by 1 year. Note: Items (1) and (3) are mutually inclusive, whereby the maximum experience requirement reduction is one (1) year (e.g., in the case of an employee with both a master's degree in Engineering AND a PE license, the minimum experience requirement would be reduced by one (1) year. Preferred Qualifications: PREFERRED QUALIFICATIONSStrong teamwork, interpersonal skills and the ability to communicate with all management levels. Strong written and oral communication skills. Demonstrated ability to lead the work activity of others. Master of Science degree in Engineering (1) or Licensed Professional Engineer (2) (3) Industry expert who participtes or leads industry committee or working groups or has published technical documents. Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $109,600.00/Yr. – $150,700.00/Yr. Annual Bonus for eligible positions: 15% 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

Type of Requisition:RegularClearance Level Must Currently Possess:Top Secret SCI + PolygraphClearance Level Must Be Able to Obtain:Top Secret SCI + PolygraphPublic Trust/Other Required:NoneJob Family:Systems EngineeringJob Qualifications:Skills:Enterprise IT, Leadership, Systems EngineeringCertifications:CompTIA - Security+ - CompTIAExperience:8 + years of related experienceUS Citizenship Required:YesJob Description:GDIT is your place. Make it your own by discovering and leading new ways to apply the latest technology securely and expertly. Our work depends on a Systems Engineering Services Lead joining our team to support Government activities in Sterling, VA or Annapolis Junction, MD.At GDIT, we foster a people-focused and customer-centric environment in delivering Infrastructure & Network Engineering Services. As a Systems Engineering Service Lead supporting Government, you will be trusted with enabling the customer to meet strategic goals for designing, engineering, and modernizing core enterprise IT services.In this role, a typical day will include:Managing systems professionals directly or through subordinate managers while offering leadership, coaching, and trainingActing as advisor to employees in meeting schedules and resolving technical problemsDeveloping schedules and performance requirements that encompass budget responsibilitiesEnhancing information systems by identifying information systems technology opportunities and developing application strategies for enterprise integrationManaging all information systems policies and proceduresWhat You Will Need:Active TS/SCI clearance and ability to obtain and maintain a CI poly.Must meet DoD 8570 IAT Level II requirements including one of the following: Security+ CE, CND, SSCP, GSEC, GICSP, CySA+, or CCNA Security.Bachelor’s Degree or equivalent 8+ years of experience or an equivalent combination of education and years of experience.Demonstrated experience managing IT engineering professionalsDemonstrated experience with Service Strategy, Design, and TransitionSystems Engineering experience with Infrastructure & Network Engineering, e.g., Load Balance & Traffic Management, Infoblox, Enterprise Monitoring, Identity &Access Management (IDAM), and Identity, Credential, & Access Management (ICAM).Translate requirements into measurable and sustainable solutions within the existing application frameworksExperience with engineering service lifecycle responsibilityAbility to solve problems creatively and effectivelySolid active listening, and communication skillsAbility to work independently and collaborate remotelyGDIT IS YOUR PLACE: Full-flex work week to own your priorities at work and at home 401K with company match Comprehensive health and wellness packages Internal mobility team dedicated to helping you own your career Professional growth opportunities including paid education and certifications Cutting-edge technology you can learn from Rest and recharge with paid vacation and holidaysThe likely salary range for this position is $161,500 - $218,500. This is not, however, a guarantee of compensation or salary. Rather, salary will be set based on experience, geographic location and possibly contractual requirements and could fall outside of this range.Scheduled Weekly Hours:40Travel Required:Less than 10%Telecommuting Options:OnsiteWork Location:USA MD Annapolis JunctionAdditional Work Locations:USA VA SterlingTotal Rewards at GDIT:Our benefits package for all US-based employees includes a variety of medical plan options, some with Health Savings Accounts, dental plan options, a vision plan, and a 401(k) plan offering the ability to contribute both pre and post-tax dollars up to the IRS annual limits and receive a company match. To encourage work/life balance, GDIT offers employees full flex work weeks where possible and a variety of paid time off plans, including vacation, sick and personal time, holidays, paid parental, military, bereavement and jury duty leave. To ensure our employees are able to protect their income, other offerings such as short and long-term disability benefits, life, accidental death and dismemberment, personal accident, critical illness and business travel and accident insurance are provided or available. We regularly review our Total Rewards package to ensure our offerings are competitive and reflect what our employees have told us they value most.We are GDIT. A global technology and professional services company that delivers consulting, technology and mission services to every major agency across the U.S. government, defense and intelligence community. Our 30,000 experts extract the power of technology to create immediate value and deliver solutions at the edge of innovation. We operate across 50 countries worldwide, offering leading capabilities in digital modernization, AI/ML, Cloud, Cyber and application development. Together with our clients, we strive to create a safer, smarter world by harnessing the power of deep expertise and advanced technology.Join our Talent Community to stay up to date on our career opportunities and events atgdit.com/tc.Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

Description Looking for an opportunity to make an impact Unleash your potential at Leidos, where we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customer’s success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.If this sounds like an environment where you can thrive, keep reading!The Digital Modernization Sector brings together our digital transformation and IT programs, allowing us to better serve our customers through scale and repeatability.- https://www.leidos.com/capabilities/digital-modernizationWe are seeking a talented and energetic candidate to work with the best and brightest employees around the country in creating innovative all-encompassing solutions for our programs. You will work in a fast-paced and diverse environment, enjoy flexible work arrangements, and will have a management team that encourages your career development and growth. In this role, you will gain many intangible skills, such as time and task management, critical thinking and problem solving, the ability to communicate complicated problems in a concise manner, as well as solve complex problems using available tools.Join the Cyber Team supporting NASA's Goddard NASCOM Mission Network Security Team as we secure and defend the worldwide NASA Mission Network. The role of Cybersecurity Engineer is a hands-on technical position joining a seasoned and diverse team of cybersecurity professionals. The team is committed to protecting NASA missions (terrestrial and celestial).Primary Responsibilities:Review and recommend proposed changes to the network or systems to determine impact to security.Implement security engineering solutions for layer 2/3 devices and servers.Perform scans of systems and provide guidance to assist system owners with remediation or mitigation.Analyze security alerts, update and maintain various CoTS tools including Tenable.SC, Cisco SNA, IDS, MFA, EPS, HCL BigFix, etc. Adjust policies and work with Federal partners as needed to minimize false positives.Analyze network traffic for trends and irregularities using netflow and full packet capture.System Administration to update and maintain OS to include ESXi, Ubuntu, Debian, RHEL, and Windows.Create, update, and maintain RMF and design/configuration/diagrams documents for NASCOM.Create tickets, collect relevant logs, and review other relevant data as needed.Basic Qualifications:Bachelor's Degree in Computer Science or IT related field (4 years of additional experience in lieu of degree) and 5+ years of IT experience.Hands-on working experience in cybersecurity engineering, intrusion detection, incident response, or forensic analysis.Solid understanding of computer network protocols including TCP/IP and encryption.Linux and Windows system administration experience.Working knowledge of information security issues, solutions, trends, and leading practices.Demonstrated analytical and communication skills.Preferred Qualifications:Coding/Scripting experience e.g. Perl, Bash, Python, PowerShell, etc.Experience working with networking and security tools such as Tenable Security Center, End Point Security, IDS, ProofPoint, SNA, and Splunk.Experience with VMware Hypervisor and related tools.Certifications such as Security+, CISSP, GCIA, CEH, GCIH, or GCFA.A self-starter, performing tasks with minimal supervision but working effectively with immediate and cross-functional team members.Effective communicator (both verbal and written).Excellent organizational, attention to details, multi-tasking, and time management skills.NASA Experience.Possess Secret security clearance (or ability to obtain one).Original Posting:May 2, 2025For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $67,600.00 - $122,200.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

ManTech seeks a motivated, career and customer-orientedSenior Deployment Engineerto join our team in Chantilly, VA. This is an onsite position.Responsibilities include but are not limited to:Configuration and installation of remote customer networks and Site surveysGathering customer requirementsPlacing circuit ordersInterfacing with the customer throughout the deployment processCreate and implement router and switch ConfigurationsCreate and maintain Visio network diagramsTroubleshoot technical issues during deploymentsProvide recommendations to enhance and improve the network and performanceProvide system wide engineering support for network conflicts, troubleshooting, and resolutionUp to 50% travel Conus and infrequent 5-10% OCONUSMinimum Qualifications:Requires Bachelor’s degree in Computer Science, Math or Engineering or equivalent and aminimum of 4 years of related deployment experience; an additional 4 years experience might be substituted for a degree.DoD 8570 IAT Level 2 certification (CCNA Security, GICSP, GSEC, Sec+, CND or SSCP)DoD 8570 computing environment certification within 6 months of hire.Cisco or Microsoft certification.Company training providedStrong network and CISCO backgroundValid US Passport and Driver's License requiredPreferred Qualifications:Experience with Customers SystemsAdvanced knowledge of routing protocols such as BGPClearance Requirements:US Citizenship and an Active Top Secret-SCI clearance adjudicated within the past 6 years.Physical Requirements:Must be able to remain in a stationary position 50%.Needs to occasionally move about inside the office to access file cabinets, office machinery, etc.Often positions self to maintain computers in the lab, including under the desks and in the server closet.Frequently communicates with co-workers, management and customers, which may involve delivering presentations.Must be able to exchange accurate information in these situations.

***Consideration given to applicants residing within a commutable distance to New Freedom, PA or willing to relocate***What You Will Do:Our Test Engineer will oversee product testing throughout the test life cycle. This includes designing, planning, execution, and preliminary analysis of results. The Test Engineer must possess and/or have the ability to develop a working knowledge of HVAC/R equipment and its application and has experience with component or system testing, test procedure development, mechanical fluid or airflow system design, troubleshooting, and operation. our Test Engineers are required to execute the testing for individual test subjects in order to successfully and efficiently complete testing for the product area customer. In this role you will conceive, develop, and evaluate plans for solving complex testing challenges. The ideal candidate will have technical aptitude in HVAC. This position is not eligible for Visa sponsorship.How You Will Do It:Provide technical communications for Test Engineering to product customer(s).Plan and execute tests of chillers and components. This may include:Participate in the development of and/or receive and review test specifications from customer group; seek out and acquire needs from other areas/disciplines who may wish to benefit from testing a particular subject.Use input from the customer group(s) to facilitate test plans and identify resource (human, physical) requirements.Meet with product engineering, product management, product technical support, or equivalent groups to agree upon and issue test plans.Work within the Test Engineering team to schedule tests and required resources with regards to capacity limitation.Provide oversight and input to Test Technicians for set up of data acquisition software configurations.Work with labor, test support, and engineering resources to actively manage the test from set up to completion. This includes daily monitoring and planning, communication, direct data acquisition, review of data acquired, provide engineering analysis of data acquired, problem resolution, and other activities necessary in order to efficiently perform and complete testing in a timely fashion.Maintain a proficiency in understanding chiller test data to guide the customer engineering teams as necessary to acceptance or assist in explanation of data results.Drive the evaluation and creation of standard procedures, test standards, and processes using applicable engineering tools. This includes, but is not limited to LEAN, 6-Sigma, Value Stream Mapping, Design of Experiments (DOE), 5S, Gemba, Kaizen (continuous improvement), KPI analysis and development, PDCA (Plan, Do, Check, Act), and Root Cause Analysis.Use experience to develop new procedures, processes, and resources as necessary to provide more efficient, accurate, and advanced testing services for product customers.What We Look For:BS required in an engineering or engineering adjacent discipline.Preferred combination education and experience, three (3) years direct work experience in the following: HVAC/R equipment development, servicing or testing, good understanding of HVAC/R systems, concepts, and diagnostics.Ability to perform test data acquisition and data analysis, test troubleshooting and diagnostics, technical reporting, and related communication at various levels is required.Experienced in environments ranging from laboratory, manufacturing/testing facilities, and field sites.Able to work in fast-paced, schedule driven work environment and possess the agility/adaptability to quickly move from one task to another when required. Must be self-motivated.Strong communication skills; willing to confront issues in an open, efficient, and tactful manner.Strong group communication and presentation skills.Demonstrated use of engineering tools and concepts within a manufacturing or testing facility.Good computer and data analysis/management skills with proficiency in Microsoft Suite Applications (Word, Excel, Access, and PowerPoint) as well as internet software and e-mail.Preferred:Familiarity in one or more technical and operational disciplines within HVAC platform development.Background in engineering or development testing.#TestEngineer#Hiring