Compensation: Starting at $28.00/hr. GuaranteedHourly Rate: up to $45.00 (based on experience and certifications)100% Paid Life InsuranceBenefits Include:Paid vacation and holidaysHealth InsuranceDental InsuranceVision InsuranceMatching 401(k)Paid on-the-job trainingLeadership development and coachingTuition reimbursement including technical certificationsSafety shoes offered through the companyReferral programEmployee discountQualifications: Must have/maintain VA State Safety and Emissions Inspector LicenseMust have a valid Driver's LicenseReliable transportation to and from workHave effective interpersonal and oral communication skillsTechnician with E.R.T. (Emissions Repair Certification) - earn up to $45.00 Flat Rate!Responsibilities: Conducts State Safety and Emissions Inspections on vehicles in an ethical manner, and following all Virginia State Police, Virginia DEQ, and company guidelinesObserves general vehicle condition while performing basic services, and reports any obvious repair needs or safety concerns to the Service ManagerMaintains shop cleanliness for a clean and inviting appearanceFollows all safety procedures and reports any concerns to the Service ManagerComply with established safety programs, including wearing protective eyewearAPPLY NOW! PM Lube, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against based upon disability.

Quality Carriers, Inc. (QC), headquartered in Tampa, FL, is North America's largest bulk liquidchemical carrier. Through a network of more than 100 terminals and facilities, we transport a broad range of chemical products and provide our customers with value-added transportation services. Why do you want to work at Quality Carriers We offer the the following amazing benefits Competitive PayTool/Boot Reimbursement ProgramWeekly PayReferral ProgramSign on BonusesEmployee benefits ( Generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans).Matching 401K Duties/Responsibilities: Diagnose and repair tractors and trailers. Perform annual/systematic 90 day and HM-183 inspections (trailers) on equipment as required. Ensure equipment meets Federal FHWA standards.Operate a yard hostler truck to move trailers within the facility yard and the shop as needed.Order and receive parts and supplies as needed.Adheres to all established safety (OSHA) and environmental policies and standards to include identification, use, and proper procedures for handling or disposal of hazardous waste.Clean, organize and maintain the work environment to ensure equipment longevity and workplace safetyUsing welding equipmentPerform miscellaneous duties as assigned. Required Skills/Abilities: Must possess at least 1 year of experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems.Must possess at least 1 year of experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. Education and Experience: Not required (High school diploma, completion of G.E.D., or equivalent vocational school preferred) We offer competitive wages and employee benefits (Flexible spending accounts, generous Paid Time Off/Holiday Schedule, in addition to Medical, Dental and Vision plans). Quality Carriers is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, military/veteran status or other characteristics protected by law. Please note that per Quality policy, we do not accept unsolicited resumes from third-party recruiters unless such recruiters were engaged to provide candidates for a specified opening. Any employment agency, person or entity that submits an unsolicited resume does so with the understanding that Quality will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Pay: $25 - $28 / hour #CAZL ExperienceRequired1 year(s): Experience with general knowledge of tractor and trailer maintenance, DOT rules and regulations, company policies and procedures. 1 year(s): Experience with general knowledge of equipment theory, principles and repair relating to diesel engines, air, and electrical, mechanical, and hydraulic systems.EducationPreferredHigh School or betterHigh School or better

Description Looking for an opportunity to make an impact At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customer’s success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.If this sounds like an environment where you can thrive, keep reading!Leidos currently has an opening for an Electro-Mechanical Technician to work in our Ladson, SC facility. As a member of the Leidos Security Enterprise Solutions (SES) team, you will be joining a diverse and dedicated group who are excited about producing industry leading screening technology.Our new Ladson, SC facility will produce a comprehensive suite of fully automated and integrated products for aviation, shipping ports, border crossings, and critical infrastructure customers.These systems provide threat detection by screening baggage, cargo, and people at checkpoints around the world.The Electro-Mechanical Technician will be responsible for the rapid manufacturing of sub-assemblies and finished systems.The day to day could cover a variety of assembly types that include cables, harnesses, panels, mechanical assemblies, or large system builds.In addition to assembly, this role will be expected to participate in system troubleshooting and diagnostics.They will often interact with test technicians and engineering to resolve technical issues.In this role the technician will need to comprehend assembly documentation, safely and properly utilize required tooling, operate material handling equipment, record system information, adhere to company policies, and interact positively with other team members.Some finished system could be large and require someone who can physically maneuver around the product. The ideal candidate will be a positive, energetic, self-motivating individual who is ready to learn and contribute to the mission.Primary Responsibilities:Troubleshoot technical issues with varying level of complexityHave a working knowledge of electrical theory and signal processingRead and interpret work instructions, drawings, schematics, and other production related documentationSolder wires, PCBA’s, and components Utilize a combination of basic hand tools and power toolsUtilize measuring tools such as multi-meters, continuity checker, Oscilloscopes, etc.Provide assembly feedback and suggested changes or improvementsComplete build records and documentation as requiredConducts quality checks on own work and may execute buddy checks on others workMaintain workspace cleanliness and organization utilizing 5S methodologiesFollow manufacturing guidelines and proceduresAdhere to company regulatory and compliance policiesParticipate in cross-training activitiesRequired Qualifications: 2+ years’ experience in manufacturing or research and development (R&D)High school diploma or equivalentMust have the ability to obtain a Public Trust clearance (US citizenship required).ESD AwarenessAverage computer skills used for daily employee taskCompetencies:Attention to detail and quality conscious Drive and ambition to execute and complete work in timely mannerPersonal sense of integrity, trust, and respectStrong interpersonal skills used to set and maintain positive culturePreferred Qualifications:Current or expired certification in any of the following: IPC 620, 610, 7711, 7721, or J-standardThe Leidos Security Enterprise Solutions (SES) team has developed a suite of integrated solutions for aviation, ports, borders, and critical infrastructure customers around the world. We provide automated threat detection for weapons, narcotics, explosives, contraband, and undeclared goods, as well as nuclear and radioactive materials, by leveraging industry leading screening technologies, AI/ML capabilities and advanced biometric tools. We have more than 24,000 products deployed across 120 countries, including best-in-class security checkpoint and inspection systems for people, checked baggage and more.Check out the links below to learn more about Security Enterprise Solutions (SES)https://careers.leidos.com/pages/security-enterprise-solutionshttps://www.leidos.com/markets/aviation/security-detectionOriginal Posting Date:2024-07-11While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:UPS is currently hiring Building and Systems Engineering (BaSE) Mechanics. This position is responsible for maintenance activities performed to keep a UPS package handling facility operating efficiently and effectively. The work is fast-paced and requires routine interaction with other hub employees. Ideal candidates must be available to work 1st, 2nd, or 3rd shift, in a 24 x 7 operation. Candidaterequires strong electrical background and must pass electrical assessment.Responsibilities and DutiesTroubleshooting, adjusting, and replacing AC and DC electrical equipment such as batteries, control stations, fuses, motor starters, relays, switches, timers, servo driven equipment, photo electrical devices, transducers, Variable Frequency Drives (VFD’s) and encodersInspecting, troubleshooting, repairing, and/or replacing mechanical components such as motors, reducers, drive chains, sprockets, sheaves, pulleys, rollers, conveyor belts, bearings, and transfer platesInspecting, troubleshooting, repairing, and/or replacing pneumatic equipment such as diverters, lubricators, hoses, and coilsInspecting, troubleshooting, repairing, and/or replacing hydraulic equipment such as hoses, fittings, cylinders, and pumpsWelding equipment such as handrails, conveyor supports, package handling equipment, carts, and grating as defined by scope of workPerforming preventive maintenance inspections of plant equipment such as conveyors, bulk carts, and power industrial equipmentOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $33.42 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Compensation: Starting at $28.00/hr. GuaranteedHourly Rate: up to $45.00 (based on experience and certifications)100% Paid Life InsuranceBenefits Include:Paid vacation and holidaysHealth InsuranceDental InsuranceVision InsuranceMatching 401(k)Paid on-the-job trainingLeadership development and coachingTuition reimbursement including technical certificationsSafety shoes offered through the companyReferral programEmployee discountQualifications: Must have/maintain VA State Safety and Emissions Inspector LicenseMust have a valid Driver's LicenseReliable transportation to and from workHave effective interpersonal and oral communication skillsTechnician with E.R.T. (Emissions Repair Certification) - earn up to $45.00 Flat Rate!Responsibilities: Conducts State Safety and Emissions Inspections on vehicles in an ethical manner, and following all Virginia State Police, Virginia DEQ, and company guidelinesObserves general vehicle condition while performing basic services, and reports any obvious repair needs or safety concerns to the Service ManagerMaintains shop cleanliness for a clean and inviting appearanceFollows all safety procedures and reports any concerns to the Service ManagerComply with established safety programs, including wearing protective eyewearAPPLY NOW! PM Lube, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against based upon disability.

Description Leidos Gibbs & Cox, currently has an opening for a Mid-Level Marine Mechanical Engineer to support the USCG Ship Design Team (CG-459). The mission of CG-459 is to provide complete lifecycle management of floating assets from concept design through delivery and sea trials. This position provides you the opportunity to contribute to the design and construction of new USCG acquisitions, including small boats, cutters, and icebreakers, directly alongside Coast Guard personnel. This position focuses on the development and review of Propulsion system designs for USCG assets.Prefer candidates to be local to Washington, DC to enable onsite work at USCG Headquarters, 2 to 3 days per week. However, fully remote candidates will be considered.Primary ResponsibilitiesProvide marine engineering support for both conventional and electric propulsion systems.Provide engineering and technical support for review of shipyard engineering documentation packages.Perform feasibility studies, trade-off analyses, and indicative propulsion designs for potential future vessel acquisition programs.Perform calculations applying propulsion system design principles, techniques, procedures and criteria.Interface directly with USCG and shipyard personnel.Basic QualificationsU.S. Citizenship and must have an active secret clearance or be eligible to be granted one.BS or MS in Technical, Engineering, or Marine degree from ABET-accredited institution, related to field of work.Minimum of 2 years’ documented experience relating to the design of marine systems.Excellent verbal and written communication skills.Preferred QualificationsActive Secret Security clearance.Familiarity with USCG, ABS and/or commercial ship design rules and regulations.Documented experience relating to the design of marine propulsion systems.Proficiency in AutoCAD or other CAD type software.Original Posting Date:2024-07-16While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $65,000.00 - $117,500.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Remote

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible formaintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel, gasoline, and alternative technologies such as compressed natural gas, liquefied natural gas, propane, hybrid, and electrical in some locations.Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls.Automotive Technicians must be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Automotive Technicians?must possess the required hand tools required to perform the applicable job assignment. ?Responsibilities and DutiesMeets D.O.T requirements required by job assignmentBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required,?throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsRequirementsMust have an active driver’s license issued by the stateMust be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Must possess the required hand tools required to perform the applicable job assignment. ?Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsClass A/Bor A Commercial Driver's License (CDL) - PreferredDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $30.44 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Compensation: Starting at $28.00/hr. GuaranteedHourly Rate: up to $45.00 (based on experience and certifications)100% Paid Life InsuranceBenefits Include:Paid vacation and holidaysHealth InsuranceDental InsuranceVision InsuranceMatching 401(k)Paid on-the-job trainingLeadership development and coachingTuition reimbursement including technical certificationsSafety shoes offered through the companyReferral programEmployee discountQualifications: Must have/maintain VA State Safety and Emissions Inspector LicenseMust have a valid Driver's LicenseReliable transportation to and from workHave effective interpersonal and oral communication skillsTechnician with E.R.T. (Emissions Repair Certification) - earn up to $45.00 Flat Rate!Responsibilities: Conducts State Safety and Emissions Inspections on vehicles in an ethical manner, and following all Virginia State Police, Virginia DEQ, and company guidelinesObserves general vehicle condition while performing basic services, and reports any obvious repair needs or safety concerns to the Service ManagerMaintains shop cleanliness for a clean and inviting appearanceFollows all safety procedures and reports any concerns to the Service ManagerComply with established safety programs, including wearing protective eyewearAPPLY NOW! PM Lube, Inc. and its affiliates are proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against based upon disability.

Description Leidos Gibbs & Cox, currently has an opening for a Senior-Level Marine Mechanical Engineer to support the USCG Ship Design Team (CG-459). The mission of CG-459 is to provide complete lifecycle management of floating assets from concept design through delivery and sea trials. This position provides you the opportunity to contribute to the design and construction of new USCG acquisitions, including small boats, cutters, and icebreakers, directly alongside Coast Guard personnel. This position focuses on the development and review of Propulsion system designs for USCG assets.Prefer candidates to be local to Washington, DC to enable onsite work at USCG Headquarters, 2 to 3 days per week. However, fully remote candidates will be considered.Primary ResponsibilitiesProvide marine engineering support for both conventional and electric propulsion systems.Provide engineering and technical support for review of shipyard engineering documentation packages.Perform feasibility studies, trade-off analyses, and indicative propulsion designs for potential future vessel acquisition programs.Perform calculations applying propulsion system design principles, techniques, procedures and criteria.Interface directly with USCG and shipyard personnel.Basic QualificationsU.S. Citizenship and must have an active secret clearance or be eligible to be granted one.BS or MS in Technical, Engineering, or Marine degree from ABET-accredited institution, related to field of work.Minimum of 5 years’ documented experience relating to the design of marine systems.Excellent verbal and written communication skills.Preferred QualificationsActive Secret Security clearance.Familiarity with USCG, ABS and/or commercial ship design rules and regulations.Documented experience relating to the design of marine propulsion systems.Proficiency in AutoCAD or other CAD type software.Original Posting Date:2024-07-16While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $81,250.00 - $146,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Remote

Description Looking for an opportunity to make an impact The Leidos National Security Sector combines technology-enabled services and mission software capabilities in the areas of cyber, logistics, security operations, and decision analytics to support our defense and intel customers’ mission to defend against evolving threats around the world. Our team’s focus is to ensure our customers have the right tools, technologies, and tactics to keep pace with an ever-evolving security landscape and succeed in their pursuit to protect people and critical assets.Your greatest work is ahead!The National Security Sector at Leidos is hiring for a Senior Mechanical Engineer to be based onsite with our Intel Community customer. This position will be responsible for designing, cost estimating, scheduling, engineering, coordination, contracting, installation oversite, inspection, and acceptance of mechanical systems/services, which include HVAC, HVAC controls, chillers, boiler, water distribution, ductwork, plumbing, and fire protection systems associated with Intel customer facilities and critical infrastructure. You will have demonstrated mechanical engineering experience, well-developed professional skills and a proven track record of delivering results. Your ability to work collaboratively with a team of people from across multiple organizations and the company will be crucial for success. This position is contingent upon contract award.What you’ll be doing:Perform HVAC, HVAC controls, chillers, boiler, water distribution, ductwork, plumbing, and fire protection systems design for FAA Terminal facilities (Air Traffic Control Tower, Terminal Radar Approach Control facilities, etc.).Perform on-site surveys to develop “to-scale” designs and detailed reports.Generate sketches/drawings showing relation of proposed installation in existing or new facilities with exact specifications and dimensions.Participate in construction inspections and final inspections.Confer with engineering staff and other personnel to identify and resolve problems with the design or implementation.Coordinate design components with a multi-disciplinary as required for site-specific modifications and new construction.Prepare AutoCAD construction drawings and prepare site-specific specifications and contract documents and independent cost estimates.Perform project management related tasks and communication (including safety plans, sequence of work, cutover plans).Assist in generating and coordinating the Integrated Risk Management Checklists (IRMC), communication plans, project risk register, to meet Operational Risk Management (ORM) requirements.Coordinate and complete Work Permits required for potential impact to lead and asbestos that may be encountered during construction.Participate in meetings inclusive of the pre-construction meeting and on-site construction meetings with stakeholders to coordinate with other ongoing construction and projects.Plan, schedule, and coordinate construction project activities to meet milestones and deadlines, working directly with stakeholders and contractors.Manage and participate in on-site cutovers, testing and restoration of facilities.Prepare, maintain, and provide periodic updates of project to team, management, and stakeholders.Manage multiple projects towards successful on-time completion.Review contractor design and construction submittals.Review project deliverables and provide verbal and written communication to the findings.Provide and coordinate timely response for project RFIs (Requests for Information) and project related submittals.Monitor progress of projects and stakeholder needs.Work independently to evaluate, select and apply standard engineering techniques and procedures, using judgement in making adaptations and modifications to Engineering designs.What does Leidos need from me Must possess an active Top Secret/SCI (TS/SCI) with Polygraph.Bachelors degree in Mechanical Engineering and 12 plus years of prior relevant experience or a Masters degree in Mechanical Engineering with 10 plus years of prior relevant experience. Additional years of experience may be considered in lieu of degree.Must be a Registered Professional Engineer in good standings in the United States.At least eight years of experience with mechanical systems design including HVAC and plumbing systems with commercial, industrial and/or government facilitiesMust have current and relevant knowledge of building and energy codes in order to be able to perform heating and cooling load calculations, ductwork sizing and layout, piping calculations and distribution, sections/elevations, and equipment sizing and selection.Working knowledge of Microsoft 365 (Word, Excel, PowerPoint), Engineering Scheduling tools and applications, and be able to use the Internet as a gathering and communicating tool.Proficiency with AutoCAD.Ability to accomplish clear and concise general and technical writing and tactfully coordinate with a variety of project stake holders, peers and management levels.Ability to maintain an electronic project folder (as required) related to site preparation and equipment installation problems.Ability to provide technical assistance and recommendations regarding the closure of construction related punch-list items.Ability to develop project plans, establish project schedules, project estimates, and provide organized documentation.Ability to effectively communicate in written and verbal form in-person or virtual and work independently in a large Engineering Organization and in a fast-paced team environment.Ability to discuss project related items with stakeholders, contractors and code related Authorities Having Jurisdiction (AHJ).Basic knowledge of multiple disciplines regarding their general requirements for typical standard types of projects.Ability to conduct efficient, organized data gathering, and data analysis.Favorable if you have:SCADA Systems familiarity.PMP Certification.Original Posting Date:2024-02-06While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $122,200.00 - $220,900.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.