FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

ManTech seeks a motivated, career and customer-oriented Hardware Engineer to join our team in Ft. Meade, MD. This is a full time position with 5 days being onsite. This position is part of a team that provides engineering and Information Technology services to provision, manage, sustain, innovate, modernize, refresh, reengineer, and secure the Nuclear Command and Control (NC2) and Non-NC2 cryptographic production infrastructure.Responsibilities include but are not limited to:Analyzing hardware specifications and system/subsystem requirements to conceive and document a practical design for hardware components to include servers, network devices, transmission media, storage devices, user interface devices, and special processors.Ensuring problems with operational hardware have been properly identified and solutions satisfy user’s requirements while preparing functional requirements and specification for hardware acquisitionsDeveloping hardware installation schedules based upon set-up, integration, and test timeliness while assisting with preparing installation guides, field test procedures, and troubleshooting guides.Conduct site surveys, assesses and documents current site network configuration and site-unique requirements, preparing engineering plans and site installation Technical Design Packages, configuring computers, communications devices and peripheral equipmentResponsible for scheduling requested evaluations submitted from vendors, receiving, unpacking, and setting up submitted commercial equipment for evaluation and setting up appropriate tools and sensors to support evaluations.Minimum Qualifications: Bachelor’s degree in communications engineering, Computer Engineering, Computer Science, Electrical Engineering, Information Systems, Mathematics, or related discipline from an accredited college or university and 7 years of experience as a Hardware Engineer analyzing complex hardware systems for SIGINT solutions. is required.Five (5) years of additional hardware engineering experience may be substituted for a bachelor’s degree.Experience with VHDL, Vilinx, Vivado or similar tools/technologies is requriedClearance Requirements:Must have a current/active TS/SCI w/ PolygraphPhysical Requirements:Must be able to remain in a stationary position for extended periods of time. Needs to occasionally move about inside the office to access file cabinets, office machinery, etc. Constantly operates a computer and other office productivity machinery, such as a calculator, copy machine and computer printer. Must be able to move vendor equipment

General Summary of PositionJob Summary:Under the general direction of the Clinical Engineering leadership team, the Imaging Specialist II is primarily responsible for tasks associated with the installation, testing, maintenance, calibration and repair of medical equipment and systems. Maintaining clinical equipment and systems considered to be advanced, specialty, highly sophisticated, integrated technology, or requiring manufacturer service training or certification, through the effective use of the medical equipment management plan, while adhering to all medical equipment policies and procedures, and manufacturer or alternative equipment maintenance (AEM) specifications. Primary Duties and ResponsibilitiesResponds to advanced support requests. Diagnoses, resolves and closes issues involving high value, complex medical equipment and systems according to service level guidelines. Services complex, specialty, highly sophisticated diagnostic imaging technology and systems. Takes part in on-call rotation, covering after-hours and weekends.Ensures that preventative maintenance is promptly performed accordingly to the established schedule. Makes daily rounds within the hospital and advanced/specialized modality areas to assure proper operation of medical equipment and systems while correcting any deviations.Orders parts, receives, inventories, assembles, inspects, and tests equipment and documents results. Coordinates efforts with supervisor and/or experienced technicians or specialists as appropriate.Inspects and tests electronic, electromechanical, and mechanical medical and scientific equipment according to specific test procedures. Verifies equipment safety and accuracy for continued use.Documents all work performed in the computerized maintenance management system (CMMS). Ensures documentation is accurate, complete and timely. Provides monthly reports as needed.Provides clear, concise, and timely follow up with colleagues, ensuring they know the status of work being performed on their equipment. Provides technical in-service or instruction to facility staff in proper operation of patient care equipment on an as-needed basis.Provides advanced support of acuity equipment for direct patient care.Reviews department/unit operations manual to ensure compliance with applicable Joint Commission standards, federal and state regulations, accepted Standards of Conduct, and the Corporate Compliance Program. Complies with all MedStar Health Policies and Procedures, Corporate Compliance Program Standards of Conduct, and all applicable statutes, rules, and regulations.Maintains orderliness and cleanliness of work areas. Maintains department facilities, equipment and materials in a condition that promotes efficiency, health, comfort and safety of patients and staff.Anticipates needs of the department, proactively suggests improvement ideas to simplify processes and assists in policy or procedure implementation. Provides information for the development of policies, procedures and records to fulfill or exceed regulatory requirements.Participates in service training of technicians concerning use and operation of equipment.Researches and makes recommendations for new medical equipment and provides support through the installation process. Completes initial inspections and completes required paperwork.Schedules and performs preventive maintenance inspections on medical devices and completes all associated paperwork in a timely and accurate manner. Is knowledgeable of applicable safety and electrical limits for healthcare equipment. May travel between various system sites or provides phone support if required. Reports problems to the Manager at the local sites if needed.May act as a Liaison between Clinical Engineering and other departments related to Medical Equipment, and other multidisciplinary systems.In conjunction with the Director of Clinical Engineering may be responsible for budget preparation and monitoring of operational/capital budget cost. May assist in evaluation, selection and installation of new equipment/systems.May oversee activities of vendors in all phases of installation and implementation of systems. Maintains effective working relationships with other departments and participates in multi-disciplinary operations, quality and service improvement teams. Minimum QualificationsEducationAssociate's degree Biomedical equipment technology, electronics or related field required or related military work/training in mechanical or electrical engineering or academic work or actual work experience aligned with AAMI's Core Competencies for the Biomedical Equipment Technician. required Experience3-4 years Experience in the repair and maintenance of diagnostic imaging technology and systems. required Licenses and CertificationsCBET - Certified Biomedical Equipment Technician Upon Hire required or must be actively pursuing CBET and obtain within 2 years required orCertified Radiology Equipment Specialist (CRES) Upon Hire required or must be actively pursuing CRES and obtain within 2 years required Knowledge, Skills, and AbilitiesAbility to anticipate tasks and prioritize assignments.Ability to input data into computer programs.Ability to travel between sites to maintain diagnostic imaging technology and systems.Ability to work with all levels of internal and external customers.Knowledge of basic electricity/electronics principles. Knowledge of hospital and department procedures and operations.Knowledge of word processing, spreadsheet and database software.Provides hospitable customer service.Skill in the use of basic and specialized hand tools and testing equipment.Well-developed verbal and written communication skills.Knowledge of Joint Commission and other regulatory agency's accreditation requirements. This position has a hiring range of $33.86 - $63.13

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.**This Analyst role can be filled at the Mid-level or Senior level. Please see minimum qualifications list below for each level**Expected Salary Range:Mid-level: $ 84,000 - $ 104,00Senior Level: $109,000- $142,000 PRIMARY PURPOSE OF POSITIONPerforms advanced technical/engineering problem solving in support of nuclear plant operations. Responsible for technical decisions. Possesses excellent knowledge in functional discipline and its practical application and has detailed knowledge of applicable industry codes and regulations.PRIMARY DUTIES AND ACCOUNTABILITIESProvides in-depth technical expertise to develop, manage and implement engineering activities and programs.Provide technical expertise and consultation through direct involvement to identify and resolve equipment and system problems.Provides initial or complete task management of engineering issues.Perform engineering and technical tasks as assigned by supervision applying general engineering principlesAccountable for the accuracy, completeness, and timeliness of work ensuring proper configuration management and assuring that standard design criteria, practices, procedures and codes are used in preparation of plans and specifications.Perform independent research, reviews, studies and analyses in support of technical projects and programs.Recommends equipment, new concepts and techniques to improve performance, simplify construction, reduce costs, correct design or material flaws, or comply with changes in codes or regulations.MINIMUM QUALIFICATIONSMINIMUM QUALIFICATIONS for Engineering Analyst/E024-yr tech degree and 2+ yrs of nuclear or related industry experience OR2-yr tech degree and 3+ yrs of nuclear or related industry experience ORHigh School Diploma and a min of 5 years applicable nuclear experienceMINIMUM QUALIFICATIONS for Engineering Analyst/E034-yr tech degree and 5 + yrs of nuclear or related industry experience2-yr tech degree and 7+ yrs of nuclear or related industry experienceHigh School Diploma and a min of 8 years nuclear experience Previous electrical maintenance or electrical engineering experitise working with large circuit breakers and transformers.

Build your best future with the Johnson Controls team!Who We Are:YORK® Chiller Solutions from Johnson Controls, help customers respond to building efficiency needs by providing the widest variety water and air-cooled industrial and commercial chillers on the market. From reducing a facility’s carbon footprint, to delivering a healthier indoor environment and cutting energy costs, we build smaller, more energy efficient chillers tailored to fit almost any comfort or process cooling application – even heating. This role will be based in the Johnson Controls Advanced Development Engineering Center (JADEC) in New Freedom, PA. Candidates must be located within a commutable distance from the facility or be willing to relocate. Get excited!...take a look at where you'll work. Johnson Controls Advanced Development and Engineering Center (JADEC)What We Offer:Competitive salaryHybrid work opportunity (upon the completion of training)Paid vacation/holidays/sick timeComprehensive benefits package including 401K, medical, dental, and vision care– available day one!On the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat You Will Do:This position is within the water-cooled chiller product engineering team. We are seeking a senior engineer to work on chiller PLC control solutions for both new product and chiller retrofit opportunities. The role would focus on both software and hardware solutions for chiller PLC products. As Senior Engineer within our Chillers product development team, you will be responsible for electrical analysis, detailed design, and control, as well as overall electrical performance of sophisticated water-cooled chillers components and systems, including providing support to manufacturing and applications engineering. In this role you will work on control systems for new industrial chiller applications as well as retrofits, hardware design, design test and sustain control panels and system wiring.How You Will Do It:Develop and maintain electronic hardware and software (temperature sensors, pressure sensors, flow sensors, and A-B software).Design of analog and digital interface circuits, development of power supply circuits and/or selection of power supplies.Perform the worst-case circuit analysis and incorporation of appropriate reliability principles to ensure reliable operation over the environmental specifications.Assist chiller team to develop, test and support chiller system controls (This includes selection of system components and accurate interfacing of them to electronic control panel I/O). Acquire agency approvals such as UL, CE and FCC on Printed Circuit boards and Electronic Panels.Independently conduct and apply costing analysis to feasibility studies on proposed designs or modifications to existing designs.Develop schedules which accurately reflect the project breakthroughs and implement to them.Integrate new and modify existing processes to cover all phases of the electronic development process.Provide mentorship and support to:Drafters and DesignersService and Field TechniciansManufacturing on Commercial Systems products.Provide mentorship to drafters and support Service and Manufacturing on Commercial Systems products.Prepares and participates in design reviews.Learns and applies regulatory codes such as UL, NEC, CSA, and CE codes.Proficient at capturing and analyzing test data to identify electrical performance problems and propose solutions for corrections.What We Look For:RequiredBSEE,BSEET, BSEMET,or related fieldPreferred candidate to have 5 years of valid experience with one or more of the following.PLC programming and troubleshooting.HVAC systems and controls.Automation control systems.Electrical systems, wiring diagrams, and troubleshooting (24VDC, 120VAC, & 240VAC).Ability to work in a fast-paced, schedule driven, team-oriented environment.Ability to program and debug PLC programs.Ability to identify obsolete parts for PLCs, HMIs, Network switches and protocol translators for customer upgrades.Provides secondary level product support to the field after product technical support resources are exhausted for PLC applications.Experience with Allen Bradley PLCs and Rockwell software (rslinx, FactoryTalk, Studio 5000, Activation Manager, etc.).Good verbal and written communication skills are required.Must be willing and able to travel domestically and internationally as required (up to 10% of time).PreferredUnderstands chiller controls.Familiarity with HVAC Systems and motor driven mechanical engineering design and test, alternative experience with gas compression would be advantageous.Chiller PLC experience.#Hybrid#ElectricalEngineer

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: PRIMARY PURPOSE OF POSITIONT&S Substation Engineering & Standards is a multi-discipline unit focusing on Civil/Structural and High Voltage (HV) Electrical disciplines. The team supports in-house design, engineering, construction, and commissioning of electric substation projects initiated by growing load demand and replacement of aging infrastructure. Projects supported by the team include transmission substation modifications and expansions, distribution substation construction and expansions, Battery Electric Storage System (BESS) siting and construction, and replacement of aging or failed equipment.The successful candidate develops and/or leads teams in studies and evaluations of new properties, site development plans, design criteria, specifications, calculations, evaluations, cost estimates, and budget development associated with the planning, design, construction, commissioning, operation, and maintenance of Exelon's electric transmission, distribution and telecommunication facilities/systems. Provides consultation and recommendations to the Company within and to other business units and/or customers as a result of studying company or customer-owned systems, properties, equipment, or facilities. Reviews financial data from budget and actual costs of projects. Provides technical expertise to strategic, legislative and operational decisions. Participates in creating, updating, and applying internal/industry standards and technology in a specialized area of expertise. Trains and mentors' others. Position may be required to work extended hours for coverage during storms or other energy delivery emergencies. Primary Duties: PRIMARY DUTIES AND ACCOUNTABILITIESLeads and performs assignments in specialized areas requiring extensive engineering expertise. Requiring maintaining state of the art engineering credential in the specialized technical area. (25%)Leads and performs engineering tasks and projects associated with a critical or analytical engineering project or a small number of complex projects that require specialized knowledge in many areas, may include field testing troubleshooting, and peer review. (30%)Evaluates, develops, implements and leads projects that have significant financial and operational impact, may also develop initial commissioning plans. Plans, writes and performs tasks for documentation deliverables and projects (10%)Participates in department planning, through field/site walkdowns, attend meetings/conference calls, provide budget recommendations and monitor performance for the accomplishment of committed results. (5%)Performs assignments while acting independently, and may lead multi-discipline teams, may include providing direct oversight of contractors. (5%)Serves as an expert in specialized area. (5%)Acts as an expert witness or provide expert opinions as required. (5%)Provides recommendations to management and implements action plans to improve performance and cost effectiveness. (5%)Provides detailed technical training, mentorship, peer review, and/or guidance to others. (5%)Participates in technical and industry societies and committees to enhance knowledge of new technologies or issues in areas of company interest, make recommendations for business decisions regarding strategy for new technologies and/or engineering techniques and tools. (5%) Job Scope: JOB SCOPEInfluences project decisions having a significant impact on the company.Support/Lead employees and or contractors in the execution of plan development used to construct and energize utility or customer equipment/systems.Applies technical knowledge to help promote a safe work environment and to enhance customer satisfaction. Minimum Qualifications: MINIMUM QUALIFICATIONSBachelor of Science degree in Engineering or Licensed Professional Engineer (2) (3)Ability to analyze and interpret complex electrical and mechanical systems.Knowledge and ability to apply problem solving approaches and engineering theoryKnowledge of engineering designs, principles and practices.Knowledge of complex field test equipment.4-7 years of professional engineering experience (1) (3) (See Note).Broad knowledge and experience with regulations, guides, standards, codes methods, practices, and advanced engineering principles necessary to perform very complex or unique assignments for a specificMinimum of two related career experiences (4) (i.e., changes in technical job responsibilities, which may or may not include a change in department) OREngineer in Training OR50% complete (by hours) with advanced technical degree, M.B.A. or Project Management Certification(1) Master's degree in Engineering reduces the OJT experience requirement by 1 year. (2) License must be issued by the state in which you are practicing. (3) PE License reduces the OJT experience requirement by 1 year. (4) Career related experiences is defined as changes in technical job responsibilities and does not have to include a change in department Note: Items (1) and (3) are mutually inclusive, whereby the maximum experience requirement reduction is one(1) year (e.g., in the case of an employee with both a master's degree in Engineering AND a PE license, the minimum experience requirement would be reduced by one (1) year). Preferred Qualifications: PREFERRED QUALIFICATIONSBachelors degree in Civil Engineering, or a related field, with a focus on site/land development and/or storm water management system designLand development and permitting experience in Maryland’s Baltimore, Harford, Howard, and Anne Arundel Counties and in the City of Baltimore.Experience performing site and zoning analysis for commercial and industrial usesKnowledgeable in roadway design, utility systems, storm water management design, and site grading and balancing.Engineer in Training (EIT) in Maryland (2) (3)Strong teamwork, interpersonal skills and the ability to communicate with all management levels.Strong written and oral communication skills.A working knowledge of analysis software packages such as TR-55, Autodesk Civil 3D, Autodesk Inventor, MATLAB, etc.Ability to analyze industry wide trends and implement enhancements. Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $90,400.00/Yr. – $124,300.00/Yr. Annual Bonus for eligible positions: 15% 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

Develop your engineering career at JLL!The Operating Engineer supports operation, inspection and maintenance processes to mechanical, HVAC, electrical and plumbing equipment and systems.You will work as part of an engineering team in Queenstown, MD.This position requires the Operating Engineer to be on-site. Local market requirements may vary slightly.WHAT YOU’LL DO Complete assigned tasks that include but are not limited to: painting, pressure washing, cleaning, maintaining lighting system bulbs/ballasts (as allowed by any licensing requirements), plumbing, HVAC systems, water treatment, hanging pictures, repair office furniture, locksmith work and general maintenanceMaintain work order system (CMMS) daily and complete any tenant service requestsMoves office furniture, machinery, equipment, and other materials as requestedPerform assigned preventive maintenance and inspection tasksSupport on-call or emergency response situations (if applicable)Troubleshoot all building systems, including electrical, DDC and pneumatic controlsComply with all safety proceduresParticipate in ongoing technical, safety, and operational process training programsOther projects and tasks to be assignedWHAT YOU BRING TO THE TABLE3+ years of related work experience, especially in repair, maintenance, HVAC, plumbing, electrical or carpentryTrade school education, union training, military service or college is desirableUniversal CFC EPA certification or interest in achieving within first year (with JLL assistance)Experience using Microsoft Office (Word, Outlook, Excel, Teams)Ability to lift up to 50 lbsComfort using ladders up to 30 feet tallAbility to frequently climb, bend, kneel, lift and/or driveStrong customer service skillsWHAT’S IN IT FOR YOUJoin an industry leader and shape the future of commercial real estateDeep investment in cutting-edge technology to power your workComprehensive and competitive benefits planA supportive, caring and diverse work environment designed for your growth and well-being#PMR1

We are looking for a talented and passionate Sr, Embedded Software Engineer to be part of an exciting team. You will have an enormous opportunity to make a large impact on the design, architecture, and implementation of cutting edge products used every day, by people you know. In this role, you will be responsible for system architecture and development of new features for embedded systems across multiple product and technology spaces (Alexa devices, IoT devices, etc.).You will join a team whose mission is to ensure that state-of-the-art technologies that serve the customer can be supported via flexible software architectures, OS and Hardware Platform abstraction, testability, and scalability across multiple device types.You will dive into ambiguous problem spaces and meticulously distill out design choices, trade-offs, and priorities. You will Investigate, prototype and deliver new and innovative system solutions, participate in design reviews, API development, and documentationYou love to share best practices, influence and align teams, and be a technical ambassador for software reuse across the wider Amazon organization.BASIC QUALIFICATIONS- 5+ years of non-internship professional software development experience- 5+ years of programming with at least one software programming language experience- 5+ years of leading design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience as a mentor, tech lead or leading an engineering teamPREFERRED QUALIFICATIONS- 5+ years of full software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations experience- Bachelor's degree in computer science or equivalentAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

At Amazon Web Services (AWS), we are inventing the future of cloud computing with a team of builders who try new things and dream big. Our web services provide a platform for IT infrastructure in the cloud that is used by hundreds of thousands of developers and businesses worldwide. Ten years ago, we couldn't have imagined how far we would come. Now we're inventing for the next ten years and beyond. But it is still Day 1 for us, and we are looking for curious people to be part of our diverse team of builders.The AWS Sales Compensation Management (SCM) team is looking for an experienced Application Engineer to play a key role in expanding the capabilities of our mission-critical Sales Compensation Management (SCM) application. In addition to requiring a high level of technical expertise, this role is about understanding the needs of the business and know-how to transform this information into technical solutions that allow the business to make swift, informed decisions. Ideal candidates will have expertise in all phases of application development life cycle in building models that scale over time while balancing accuracy, flexibility, and speed. The successful candidate will be passionate about their work, self-motivated, detail oriented and have excellent problem solving abilities. They will deal with highly ambiguous problems, take responsibility for finding solutions, and will drive towards simple solutions to complex problems. Experience in a Sales Compensation Management tool like Varicent, Callidus, Xactly, Spiff, etc. is preferred.Key job responsibilities- Work with various functions and end users to identify, document, and communicate standard business processes.- Deliver reliable, scalable, and efficient applications managing all phases of the development life cycle, including requirements gathering, modeling & design, development, testing, deployment, integration, and documentation.- Work with cross-functional teams to develop solutions that accelerate cycle times, alleviate cumbersome manual processes, and ensure results are accurate.- Identify process improvement opportunities to drive innovation.- Earn Trust of Others. Engage with many internal AWS teams, building relationships and helping identify existing components and technologies that can be leveraged to deliver on our goals.About the teamAbout AWSDiverse ExperiencesAWS values diverse experiences. Even if you do not meet all of the qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying. Why AWS Amazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Inclusive Team CultureHere at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (gender diversity) conferences, inspire us to never stop embracing our uniqueness. Mentorship & Career GrowthWe’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. Work/Life BalanceWe value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud. AWS Sales, Marketing, and Global Services (SMGS) is responsible for driving revenue, adoption, and growth from the largest and fastest growing small- and mid-market accounts to enterprise-level customers including public sector. The AWS Global Support team interacts with leading companies and believes that world-class support is critical to customer success. AWS Support also partners with a global list of customers that are building mission-critical applications on top of AWS services.BASIC QUALIFICATIONS- Bachelor's degree in Information Systems, Computer Science, Electrical Engineering or related discipline.- 5+ years previous experience implementing end-to-end sales performance management solutions, including system configuration, model building, data security, and reporting.- Experience implementing enterprise-level applications for Sales Compensation Management (IBM Varicent, Xactly, Optymyze, etc.)PREFERRED QUALIFICATIONS- Master’s degree in Information Systems, Computer Science, Electrical Engineer or related discipline.- Excellent communication (verbal and written) and interpersonal skills, and an ability to effectively communicate with both business and technical teams.- Familiarity with AWS services such as EC2 and S3 and advanced knowledge of SQL, Oracle, OLAP, and data warehousing concepts. Experience in JAVA/Python/Perl scripting language.- Experience working with large-scale, complex datasets- Experience developing visualizations and dashboards.Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $104,300/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we’re the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain and we’re looking for talented people who want to help. You’ll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You’ll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you’ll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion.The Data Center Engineering Operations Technicians (EOTs) are Amazon’s front line responders for hands-on electrical and mechanical operations and troubleshooting. This equipment includes, but is not limited to, stand-by diesel generators, switchboards/switchgears, UPSs, PDUs, AHUs, pumps, motors, VFDs, and building automation systems. They provide 24/7 shift coverage which could include 12 hour shifts, rotating shifts, 3, 4, or 5 day work weeks. Responsibilities:- Operate and maintain mechanical, electrical, generator, and fire/life safety equipment within the data center - Troubleshoot facility equipment and rack-level events within internal SLAs- Perform limited maintenance tasks to including filter changes, HVAC PMs, rack power installs, rack PDU, and rack ATS replacements- Provide support to Data Center Operations technicians - Perform root cause analysis of equipment failures- Ensure all safety procedures are adhered to while performing work- Write procedures - Work a 12 hour shift (rotating 3 and 4 day work weeks days or nights)- Take daily operational readings of all mechanical and electrical equipment through routine rounds/log to include but not limited to temperatures, voltages, currents, etc.- Utilize internal CMMS to manage building workflows and spare part inventory- Supervise contractors who perform servicing or preventive maintenance- Respond to off hour emergency calls per on call rotation for any one of the region’s sites- Fully comply with all physical security procedures and policies - Drive innovation while reducing operational costs in the facilities - Manipulate small wires and objectsPerform the following tasks, with or without reasonable accommodation:- Walk job sites in uneven terrain - Work at heights and from ladders - Regularly lift and/or move up to 39 pounds; and participate in group lifts for 40 pounds or more - Bend or twist the body into unusual positions while working - Push or pull heavy objects into position - Work in noisy environmentsThis position requires that the candidate selected be a US Citizen and must currently possess an active Top Secret security clearance. The position further requires that, after start, the selected candidate obtain and maintain an active TS/SCI security clearance with polygraph and satisfy other security related requirements.Military Ratings/MOSs:- Navy: AD, AE, AT, CE, CM, EM, EMN, ET, ETN, EW, FC, FT, MM, MMN, EN, STG, STS, UT- Army:15D, 15F, 15X, 15Y, 21P, 21Q, 21R, 31L, 35N, 52C, 52D, 52F- Marines:612, 613, 1141, 1142, 1161, 6073, 6322, 6323, 6324, 6326, 6332, 6333, 6336, 6337- Air Force: 3E531, 3E631, 3E032, 3E131, 3E331, 3E431, 2M033, 3D136, 3D137, 3E031About the teamAmazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud. Here at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon) conferences, inspire us to never stop embracing our uniqueness.We’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. BASIC QUALIFICATIONS- 3+ years of maintenance experience on mechanical or electrical equipment- Experience operating electrical or mechanical systems in a mission critical environment (i.e. Data Center, telecom, etc.)- Current, active US Government Security Clearance of Top Secret or abovePREFERRED QUALIFICATIONS- Associate’s Degree in Electrical Engineering, Mechanical Engineering or relevant discipline- Familiar with building management systems (BMS/EPMS) and 4+ years of Data Center Engineering Experience- Ability to prioritize in a complex, fast-paced environment- Operating engineering license(s) such as DC II, DC III, or equivalent- Electrical or mechanical Journeyman License, or CFC license (Universal or minimum Type II), or NFPA 70E Certification.Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

Description Leidos is looking for a passionate Systems Engineer with hands-on experience in the TMPC Mission Distribution System (MDS) and the Weapons Control System. If you excel in the Systems Engineering Process and thrive on clear, effective communication, we want you on our team. Your knack for developing robust software test plans and navigating rigorous testing processes will directly impact future-forward defense solutions.What You’ll DoCollaborate and Innovate: Join a seasoned team of Systems Engineers and work closely to scrutinize requirements and execute test modifications, ensuring every detail aligns with meticulously defined standards.Own the Testing Cycle: From designing and developing software tests to troubleshooting, debugging, and enhancing mission-critical systems, you’ll be an integral part of the quality assurance process throughout the full testing life cycle.Analyze and Evolve: Dive deep into software requirements analysis, evaluate hardware compatibility, and build comprehensive test proceduresall while applying industry-leading principles, standards, and the latest tools to drive our software-intensive products forward.Operate in a DoD Environment: Bring your experience from DoD testing environments to bear, ensuring that every component of your work meets the high demands and rigorous quality expectations of defense technology.Basic Qualifications Must have BS degree with 2–4 years of relevant experience. Candidates with a Master’s degree and less than 2 years of experience are also encouraged to applyMust have current Top Secret clearance and the ability to obtain a Top Secret SCI security clearance.Preferred Qualifications: Experience with the Tomahawk Weapon System and familiarity with the Valid Platform List will set you apart and help you quickly integrate into our cutting-edge projects.At Leidos, you’ll not only be advancing your career in Systems Engineeringyou'll also be contributing to solutions that make a real-world impact. If you’re ready to step up to a role where your technical prowess and communication skills can shine on a grand stage, we’d love to hear from you.Let’s push the boundaries of innovation together; your journey to shaping the future of defense technology starts here.Original Posting:April 15, 2025For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $67,600.00 - $122,200.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Thank you for your interest in working for our Company. Recruiting the right talent is crucial to our goals. On April 1, 2024, 3M Healthcare underwent a corporate spin-off leading to the creation of a new company named Solventum. We are still in the process of updating our Careers Page and applicant documents, which currently have 3M branding. Please bear with us. In the interim, our Privacy Policy here: https://www.solventum.com/en-us/home/legal/website-privacy-statement/applicant-privacy/ continues to apply to any personal information you submit, and the 3M-branded positions listed on our Careers Page are for Solventum positions. As it was with 3M, at Solventum all qualified applicants will receive consideration for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.Job Description:Bioprocess Applications Engineer - Biopharma (Solventum)We arepleased to announce that Solventum has entered into a definitive agreement to sell ourPurification &Filtration business to ThermoFisher Scientific. This transaction is anticipated to be completed by the end of 2025, subject to the satisfaction of customary closing conditions, receipt of regulatory approvals,andcountry specific informationandconsultation needs where required. This is a significant milestonefor theP&Fbusinessandwill allowfor the strategic investmentandresources neededfor sustaining growthanddelivering customer solutions. By joining us during this transitionalperiod, you will be able to work alongside an energizedandmission-driven team who is experiencing this transition along with you. Until then, Solventum will continue to operate as a unified entity,andemployment is subject to all applicable termsandconditions as setforth in our employment agreementandcompanypolicies.The Impact You’ll Make in this Role:As a Bioprocess Applications Engineer, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative and diverse people around the world. Here, you will make an impact by utilizing Solventum’s technologies to improve our customer’s manufacturing processes, many of which are for lifesaving medicines. This will include:Designing and executing experiments from lab to manufacturing scale and analyzing data to help current and prospective customers find the optimal solution for their processesProviding support, guidance and training to existing and prospective clientsBuilding strong peer-to-peer technical relationships with our current and prospective customersBeing the voice of the customer within Solventum by providing market insights to support customer-centric sales, marketing activities and product development activitiesDevelop into a regional bioprocessing expert in the industry through extensive collaborations across Solventum’s customer base including on joint publications, presentations, and industry participation to elevate Solventum’s reputation within the bioprocessing communityThis position can be adapted to accommodate varying levels of experience and education, ranging from junior to senior roles.Your Skills and Expertise:To set you up for success in this role from day one, Solventum requires (at a minimum) the following qualifications:Bachelor’s degree, master’s or higher in a Science or Engineering disciplineTwo (2) or more years of bioprocess process development (PD) and/or manufacturing science and technology (MSAT) experience in a clinical or commercial environmentTwo (2) years of customer support and/or managing vendor relationships and engagements.Experienced in general analytical methods to characterize process fluids (ex: HPLC, ELISA, PCR and DLS)Working knowledge of purification processes in the Biopharmaceutical industryAdditional qualifications that could help you succeed even further in this role include:Ph.D. in Chemical Engineering, Biochemical Engineering, Bioengineering, or related discipline from an accredited institutionExperience in on-site and remote support to biopharmaceutical companies (small to large scale companies) for filter selection and sizing, process optimization, troubleshooting, and scale-upWorking knowledge of protein purification processesExperience evaluating filtration steps to optimize key process parameters with a distinct focus on process economics modelingTrack record of technical collaborations across internal and external organizations, professional technical conference presentations and peer-reviewed publications.Experience supporting the customer through FDA drug approval process in proteins, vaccines, and viral vectors in recombinant protein biopharmaceutical processWorking knowledge of advanced modality processing such as gene and cell therapyWork location:Remote: Candidate must reside in one of the following states :NC,MD,PA, NJTravel:To customer sites in territory and supporting other sites on the East Coast. Domestic travel up to 40%. International travel may be included, up to 5%.Relocation Assistance: May be authorizedSupporting Your Well-being: Solventum offers many programs to help you live your best life – both physically and financially. To ensure competitive pay and benefits, Solventum regularly benchmarks with other companies that are comparable in size and scope.Applicable to US Applicants Only:The expected compensation range for this position is $119,076 - $145,537, which includes base pay plus variable incentive pay, if eligible. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate’s relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: https://www.solventum.com/en-us/home/our-company/careers/#Total-RewardsResponsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties.Solventum is committed to maintaining the highest standards of integrity and professionalism in our recruitment process. Applicants must remain alert to fraudulent job postings and recruitment schemes that falsely claim to represent Solventum and seek to exploit job seekers.Please note that all email communications from Solventum regarding job opportunities with the company will be from an email with a domain of @solventum.com. Be wary of unsolicited emails or messages regarding Solventum job opportunities from emails with other email domains.Please note, Solventum does not expect candidates in this position to perform work in the unincorporated areas of Los Angeles County.Solventum is an equal opportunity employer. Solventum will not discriminate against any applicant for employment on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, or veteran status.Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.Solventum Global Terms of Use and Privacy StatementCarefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at Solventum are conditioned on your acceptance and compliance with these terms.Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application you will be asked to confirm your agreement with theterms.

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Bank of America or JPMorgan Chase among other leading organizations in the Baltimore area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Business Operations - Project Management - Banking - Customer Success - IT Support - Data Analytics Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.

ManTech seeks a motivated, career and customer-oriented Software Assurance Evaluation Engineer to join our team in Hanover, MD. This is a full time position with 5 days being onsite. The position is part of a team that provides software development support for an organization that is tasked with dissemination of data to various customers within the Intelligence Community.Responsibilities include, but are not limited to:Responsible for leading the development of Software Assurance Analysis methodologies, formulating, and validating testing scores, creating, and validating test cases that support Software Assurance (SwA) tool analysis.Acts as a technical expert in the testing of client software and defines remediation recommendations with clients to define recommended remediation.Responsible for mentoring junior Software Assurance Evaluation Engineers providing advice, guidance, consultation and teaching state-of-the-art software assurance testing and analysis techniquesResponsible for leading efforts in defining new methods and techniques for software assurance testing and analysis. Leading teams and surveying industry to identify new source code SwA tools and methodologies.Will be responsible for tuning and running source code analysis tools, evaluating the strengths and weaknesses, and determining the suitability for a given software/customer while interpreting, prioritizing, and using source code SwA tools results to remediate potential vulnerabilities in software.Required Qualifications:Master’s Degree in software engineering, computer science or electrical engineering and eleven (11) years’ experience in systems security engineering, software vulnerability assessment.Or Bachelor’s Degree in software engineering, computer science or electrical engineering and fifteen (15) years’ experience in systems security engineering, software vulnerability assessmentFifteen (15) years of experience evaluating the strengths and weaknesses and determining the suitability of software in a given software/customer environment.Ten years of experience designing, implementing and testing source code SwA analysis processes.Ten years of experience programming in Java, C/C++, or C#.Five years of experience developing/consulting on code for production systems using structured development environments.Preferred Qualifications:Experience with some or all the below technologies:KlockworkCodePeerFortran-LintCodeSonarSecurity FortifyIDA ProMATLABSecurity Clearance Requirements:Active TS/SCI w/ PolygraphPhysical Requirements:Must be able to remain in a stationary position 50%.Constantly operates a computer and other office productivity machinery, such as a calculator, copy machine and computer printer.The person in this position frequently communicates with co-workers, management, and customers, which may involve delivering presentations.

General Summary of PositionJob Summary:MedStar Health is looking for a Stationary Engineer to join our team atMedStar Harbor Hospital!The Stationary Engineer willoperatethepower plant tosupply steam and hot waterandmaintainrequiredwater temperature on hot water systems. Maintains a suitable and safe climatic environment. Performs preventive or corrective maintenance on equipment.Join one of the largest healthcare systems in the Baltimore-Washington metro region, also recognized as one of the "Healthiest Maryland Businesses". Apply today and learn how MedStar Health can be your nextgreat careermove!Primary Duties:Diagnoses, repairs, and installs using blueprints, codes, specifications, and other industry standards.Keepsaccurateoperational logs of equipment in multiple buildings.Makerounds of machinery rooms, cooling towers, boiler rooms, and rooftops to perform visual inspections of equipment and verify its operation.Makes necessary water tests on converters and chillersand keeps assigned station clean and safe.Performs preventive and corrective maintenance on all HVAC equipment and other related machinery.Prepares boilers and related equipment for inspection andmaintainswater treatment by performing daily tests of all circulating open and closed loop systems and adding chemicals to achieve designated department standards.Qualifications:High School Diploma or GED.3-4 years’related experience.Engineer First Grade - SEL Maryland Stationary Engineer Grade 1 license required.Verbal and written communication skills.Basic computer skills preferred.This position has a hiring range of $33.86 - $57.13

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.***This Engineering role can be filled at the Entry, Mid-level or Senior Engineer level. Please see minimum qualifications list below for each level***Expected salary range:Entry Level - $82,500Mid-Level - $88,000 - $108,000Sr Level - $115,000- $141,000Ranges are per year based on experience, along with a comprehensive benefits package that includes bonus and 401K.MINIMUM QUALIFICATIONS for Entry Level E01 Engineer &ndash New GraduateB.S in EngineeringMINIMUM QUALIFICATIONS for Mid-level E02 EngineerB.S. in Engineering, a minimum 2 years Nuclear experience or related engineering experienceMINIMUM QUALIFICATIONS for Senior E03 EngineerB.S. in Engineering, a minimum 5 years Nuclear experience or related engineering experience Role: I&C Design EngineerJob Description:Prepare/Review Internal calculationsPrepare/Review Engineering Changes (EC&rsquos) for Distributed Control Systems (DCS), Human-Machine Interfaces (HMI), and Programmable Logic Controllers (PLC) applications, single loop controllers and field sensors.Prepare component and control system hardware design, software verification, validation, network design, and configuration.Review software hazards analysis, Failure Modes and Effects Analysis (FMEA), and human factors engineeringDevelop the engineering cost estimate, schedule, and project specification.Participate in the bid specification preparation and vendor bid selection process.When engineering services are contracted, perform owners acceptance reviews, maintain responsibility for the work and manage schedule and cost.Plant Outage and Online Support for Modifications as requiredPerform technical and engineering problem-solving tasks to support nuclear plant operations. PREFERRED QUALIFICATIONSProfessional Engineer RegistrationAdvanced technical degree or related coursework

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

***Consideration given to applicants residing within a commutable distance from New Freedom, PA or willing to relocate***Build your best future with the Johnson Controls team!Who We Are:Johnson Controls is powered by your talent. We are the power behind the customer mission. Together we are building a world that’s safe, comfortable and sustainable. Our diverse global team of 100,000 experts in more than 150 countries creates innovative, integrated solutions to make cities more connected, buildings more intelligent and environments more comfortable and secure.What We Offer:Competitive salary Paid vacation/holidays/sick time - 15 days of vacation first year!Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one!Extensive product and on the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat You Will Do: Johnson Controls has a great opportunity for a Senior Electrical Test Engineer to join our dynamic team in New Freedom, PA, where you will conduct design, simulation, prototype testing, reliability testing to confirm the product operates as expected with reference to specific documented hardware requirements.Johnson Controls Advanced Development and Engineering Center (JADEC)How You Will Do It:Maintain and test printed circuit boards, which contains MCU, FPGA and other circuits, for chiller application.Conduct prototype testing on hardware-in-loop system, variable speed drives and chiller to verify control performance.Conduct Variable Speed Drive (>250KW) testing at Dyno or on chiller.Collect waveforms using oscilloscope or/and data using power analyzer.Data analysis using MATLAB script and understand FFT results.Analyze VSD performances using testing results.Provide guidance/support to product technical support team and PCBA manufacturing factories as needed to maintain existing and/or NPI products.Understanding and complying with quality policy, procedures and instructions to ensure product quality and customer satisfaction.What You Will Need:RequiredBSEE or BSCE, or related field.Minimum of 3 years of experience.Familiarity with the usage of oscilloscope, power analyzer, differential probe and Rogowski coil.Experience with data collection using scope and power analyzer.Familiarity with the concept of Fourier Transform Analysis and use it on test data analysis.Ability to work in a fast-paced, schedule driven, team-oriented environment.Positive team player, strong verbal and written communication.Preferred:Familiarity with Variable Speed Drive (VSD) testing at dynamometer. Capable of working with VSD having three phase 460VAC inputs.Good understanding of power electronics and motor control. Experience with motor control.#Electricalengineer#TestEgineer

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: PRIMARY PURPOSE OF POSITIONTransmission and Substation Engineering & Standards is a multi-discipline unit focusing on High Voltage (HV) Electrical, System Protection & Control (SPC) and Civil/Structural (CV) disciplines. The team supports internal and external design, engineering, construction, and commissioning of electric substation projects initiated by growing load demand and replacement of aging infrastructure. Projects supported by the team include transmission substation modifications and expansions, distribution substation construction and expansions, and replacement of aging or failed equipment.The Principal Engineer/Subject Matter Expert (SME) possesses specialized knowledge and experience in the design, selection, installation, and maintenance of critical substation equipment, such as, Circuit Breakers, Capacitors, Switchgear, Gas Insulated Switchgear, Battery Energy Storage Systems, STATCOM, etc... The candidate will have experience in the design & execution of complete high voltage transmission and distribution substations, with relevant projects on applications that range from 4kV to 500kV.The successful candidate develops and/or leads teams in studies, plans, design criteria, specifications, calculations, evaluations, cost estimates, budgets, associated with the planning, design, construction, operation, and maintenance of Exelon's electric, transmission, distribution, and telecommunication facilities/systems.Provides consultation and recommendations to the Company within and to other business units and/or customers as a result of studying company or customer-owned systems, properties, equipment, or facilities. Reviews financial data from budget and actual costs of projects. Provides technical expertise to strategic, legislative, and operational decisions. Participates in creating, updating, and applying internal/industry standards and technology in a specialized area of expertise. Trains and mentors’ others. Position may be required to work extended hours for coverage during storms or other energy delivery emergencies. Primary Duties: PRIMARY DUTIES AND ACCOUNTABILITIESLeads and performs assignments in specialized areas requiring extensive engineering expertise. Requiring maintaining state of the art engineering credential in the specialized technical area. (25%)Leads and performs engineering tasks and projects associated with a critical or analytical engineering project or a small number of complex projects that require specialized knowledge in many areas, may include field testing troubleshooting, and peer review. (30%)Evaluates, develops, implements and leads projects that have significant financial and operational impact, may also develop initial commissioning plans. Plans, writes and performs tasks for documentation deliverables and projects (10%)Participates in department planning, through field/site walkdowns, attend meetings/conference calls, provide budget recommendations and monitor performance for the accomplishment of committed results. (5%)Performs assignments while acting independently, and may lead multi-discipline teams, may include providing direct oversight of contractors. (5%)Serves as an expert in specialized area. (5%)Acts as an expert witness or provide expert opinions as required. (5%)Provides recommendations to management and implements action plans to improve performance and cost effectiveness. (5%)Provides detailed technical training, mentorship, peer review, and/or guidance to others. (5%)Participates in technical and industry societies and committees to enhance knowledge of new technologies or issues in areas of company interest, make recommendations for business decisions regarding strategy for new technologies and/or engineering techniques and tools. (5%) Job Scope: JOB SCOPEInfluences project decisions having a significant impact on the company.Support/Lead employees and or contractors in the execution of plan development used to construct and energize utility or customer equipment/systems.Applies technical knowledge to help promote a safe work environment and to enhance customer satisfaction. Minimum Qualifications: MINIMUM QUALIFICATIONSMaster of Science degree in Engineering or Licensed Professional Engineer.Ability to analyze and interpret complex electrical and mechanical systems.Knowledge and ability to apply problem solving approaches and engineering theory.Knowledge of engineering designs, principles and practices. 8+ years of experience in specific areas of engineering and recognized industry expert (Requirement reduced by one year for Licensed Professional Engineer) Advanced knowledge and experience with regulations, guides, standards, codes, methods, practices, and advanced engineering principles. Advanced knowledge of latest technologies necessary to perform a variety of specialized unique or complex assignments for various installation types of services. Industry expert who participates or leads industry committee or working groups or has published technical documents Note: there are a limited number of personnel available in the industry with the required knowledge, ability and experience. License must be issued by the state in which you are practicing Preferred Qualifications: PREFERRED QUALIFICATIONSStrong teamwork, interpersonal skills and the ability to communicate with all management levels.Strong written and oral communication skills.Strong background in Forensic Analysis and ability to conduct investigations, identify patterns, and help derive actionable insights from complex datasets.A working knowledge of analysis software packages such as ASPEN, CDEGS, Autodesk, Autodesk Inventor, MATLAB, etc.Ability to analyze industry wide trends and implement enhancements. Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $120,000.00/Yr. – $165,000.00/Yr. Annual Bonus for eligible positions: 20% 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

The Amazon Devices team designs and engineers high-profile consumer electronics, including the best-selling Kindle family of products. We have also produced innovative devices like Fire tablets, Fire TV, Amazon Dash, and Amazon Echo. What will you help us create Work hard. Have fun. Make history. The Role We are looking for a talented and passionate Embedded Software Engineer to be part of an exciting team. You will have an enormous opportunity to make a large impact on the design, architecture, and implementation of leading edge products used every day, by people you know. In this role, you will be responsible for system architecture and development of new features for embedded systems across multiple product and technology spaces (Alexa devices, IoT devices, etc.). You will join a team whose mission is to ensure that state-of-the-art technologies that serve the customer can be supported via flexible software architectures, OS and Hardware Platform abstraction, testability, and scalability across multiple device types. You will dive into an ambiguous problem spaces and meticulously distill out design choices, trade-offs, and priorities. You will Investigate, prototype and deliver new and innovative system solutions, participate in design reviews, API development, and documentationYou love to share best practices, influence and align teams, and be a technical ambassador for software reuse across the wider Amazon organization.BASIC QUALIFICATIONS- 6+ years of non-internship professional software development experience- 6+ years of programming with at least one software programming language experience- 6+ years of leading design or architecture (design patterns, reliability and scaling) of new and existing systems experience- Experience as a mentor, tech lead or leading an engineering teamPREFERRED QUALIFICATIONS- 6+ years of full software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations experience- Bachelor's degree in computer science or equivalentAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we’re the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain and we’re looking for talented people who want to help. You’ll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You’ll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you’ll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion.They maintain, operate, troubleshoot, and repair Data Center Operation’s Mission Critical Facilities, which includes stand-by diesel generators and related fuel systems, 3 phase electrical systems that include but not limited to switchgear, UPSs, PDUs, wet cell batteries and associated systems, CRAC, centrifugal chillers, cooling towers/water chemical system, air handlers and associated systems, pumps, & motors. Responsibilities:- Operate and maintain mechanical, electrical, generator, and fire/life safety equipment within the data center- Troubleshoot facility equipment and rack-level events within internal SLAs- Perform limited maintenance tasks to including filter changes, HVAC PMs, rack power installs, rack PDU, and rack ATS replacements- Provide support to Data Center Operations technicians- Perform root cause analysis of equipment failures- Ensure all safety procedures are adhered to while performing work- Write procedures- Work a 12 hour shift (rotating 3 and 4 day work weeks days or nights)- Take daily operational readings of all mechanical and electrical equipment through routine rounds/log to include but not limited to temperatures, voltages, currents, etc.- Utilize internal CMMS to manage building workflows and spare part inventory- Supervise contractors who perform servicing or preventive maintenance- Respond to off hour emergency calls per on call rotation for any one of the region’s sites- Fully comply with all physical security procedures and policies- Drive innovation while reducing operational costs in the facilities- Manipulate small wires and objectsPerform the following tasks, with or without reasonable accommodation:- Walk job sites in uneven terrain- Work at heights and from ladders- Regularly lift and/or move up to 39 pounds; and participate in group lifts for 40 pounds or more- Bend or twist the body into unusual positions while working- Push or pull heavy objects into position- Work in noisy environments This position requires that the candidate selected be a US Citizen and obtain and maintain an active TS/SCI security clearance with polygraph. Military Ratings/MOSs:- Navy: AD, AE, AT, CE, CM, EM, EMN, ET, ETN, EW, FC, FT, MM, MMN, EN, STG, STS, UT- Army:15D, 15F, 15X, 15Y, 21P, 21Q, 21R, 31L, 35N, 52C, 52D, 52F- Marines:612, 613, 1141, 1142, 1161, 6073, 6322, 6323, 6324, 6326, 6332, 6333, 6336, 6337- Air Force: 3E531, 3E631, 3E032, 3E131, 3E331, 3E431, 2M033, 3D136, 3D137, 3E031About the teamAmazon Web Services (AWS) is the world’s most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating that’s why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses.Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn’t followed a traditional path, or includes alternative experiences, don’t let it stop you from applying.We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there’s nothing we can’t achieve in the cloud. Here at AWS, it’s in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon conferences, inspire us to never stop embracing our uniqueness.We’re continuously raising our performance bar as we strive to become Earth’s Best Employer. That’s why you’ll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. BASIC QUALIFICATIONS- 4+ years of maintenance and repair experience on mechanical and electrical equipment.- Experience operating electrical and mechanical systems in a mission critical environment (i.e. Data Center, telecom, etc.). - Familiar with building management systems(BMS/EPMS).PREFERRED QUALIFICATIONS- 2+ years of data center engineering experience- Associate’s Degree in Electrical Engineering, Mechanical Engineering or relevant discipline- 4+ years of Data Center Engineering Experience and fundamental knowledge of network design and layout as well as low voltage (copper/ fiber) cabling- Familiar with BMS and EPMS control systems and data collection/trending and proficient with maintenance management software- Operating engineering license(s) such as DC II, DC III, Electrical or mechanical Journeyman License, CFC license (Universal or minimum Type II), NFPA 70E CertificationAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

Year Up United is a one-year or less, intensive job training program that provides young adults with in-classroom skill development, access to internships and/or job placement services, and personalized coaching and mentorship. Year Up United participants also receive an educational stipend. The program combines technical and professional training with access to internships and job placement support through our industry-leading talent placement firm YUPRO Placement. If you receive an internship, it may be at Bank of America or JPMorgan Chase among other leading organizations in the Baltimore area. Are you eligible You can apply to Year Up United if you are: - A high school graduate or GED recipient - Eligible to work in the U. S. - Available Monday-Friday throughout the duration of the program - Highly motivated to learn technical and professional skills - Have not obtained a Bachelor's degree - You may be required to answer additional screening questions when applying What will you gain Professional business and communication skills, interviewing and networking skills, resume building, ongoing support and guidance to help you launch your career. During the internship phase, Year Up United students earn an educational stipend of $525 per week. In-depth classes include: - Business Operations - Project Management - Banking - Customer Success - IT Support - Data Analytics Get the skills and opportunity you need to launch your professional career. 75% of Year Up United graduates are employed and/or enrolled in postsecondary education within 4 months of graduation. Employed graduates earn an average starting salary of fifty-three thousand dollars per year.

Description The NISC IV program at Leidos is seeking an Military Frequency Engineer to join our engineering team. In this role, you will be responsible for the design, analysis, and optimization of systems that involve electromagnetic spectrum usage. The ideal candidate will have a strong background in RF (Radio Frequency) engineering, signal processing, and spectrum management, with a focus on ensuring compliance with regulatory standards. The engineer will work closely with regulatory bodies, engineering teams, and project managers to support spectrum-related initiatives across various projects.Must be able to obtain a Public Trust Security Clearance Suitability (To be eligible, one must be either a U.S. Citizen OR a U.S. Permanent Resident/Green Card holder who has resided in the U.S.A for the past 3 years.)All new hires must pass a drug test prior to starting with Leidos.Primary Responsibilities:Using aeronautical charts and FAA database/software analysis tool, conduct operational characterization and engineering analysis of the DoD mission requests for use of the spectrum bands.Review and coordinate military tactical data link network (Link16) requests and exercise requests.Ensure requests and assignments meet FAA compatibility criteria for operation within the national airspace and process accordingly.Manage spectrum allocation and usage, ensuring compliance with FCC and other international regulatory bodies.Stay updated with the latest spectrum technologies and trends to continuously improve system performance.Provide support in the deployment of RF systems, including site surveys, system integration, and troubleshooting.Develop technical documentation, including system design, test plans, and performance reports.Perform spectrum analysis and interference mitigation to optimize system performance.Collaborate with cross-functional teams to ensure that designs meet industry standards and regulatory requirements.Conduct testing and validation of RF systems, antennas, and other wireless communication devices.Basic Qualifications: Must have an active Secret security clearance.Bachelor’s degree in electrical engineering or related field plus 8 to 12 years of relevant experience.3+ years of experience in RF engineering, spectrum analysis, or a similar field.Hands-on experience with spectrum analyzers, network analyzers, and RF testing equipment.Knowledge of FCC regulations and international spectrum management policies.Strong understanding of electromagnetic theory, signal propagation, and antenna design.Proficiency in software tools such as MATLAB, HFSS, CST, or similar.Excellent problem-solving skills and attention to detail.Strong communication and teamwork skills.Strong problem-solving skills with the ability to work independently and within a team environment.Excellent communication skills, both written and verbal.Preferred Qualifications:Master’s degree in electrical engineering or related fieldRadio Spectrum Management experience is highly desiredCertification in RF or spectrum management (e.g., FCC, iNARTE, etc.).Prior experience, such as Spectrum coordination of Link-16 TFAs, EMCF certification of Link-16 terminals, or Link-16 LPDS are highly desiredFamiliarity with spectrum sharing, dynamic spectrum access, or cognitive radio technologies.Please note: The selected candidate will be required to commute to the FAA facility in Washington, DC at least 3 to 5 times out of the year.Original Posting:April 17, 2025For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $104,650.00 - $189,175.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

ManTech is seeking a Cloud Software Engineers to join our team in the Ft. Meade, MD area. In this role, you will develop, maintain, and enhance complex and diverse Big-Data cloud systems based upon documented requirements.Responsibilities include, but are not limited to:Design and develop software solutions using Kubernetes.Collaborate with team members to determine best practices and client requirements for software.Develop high-quality software design and architecture.Identify, prioritize and execute tasks in the software development life cycle.Develop tools and applications by producing clean, efficient code.Automate tasks through appropriate tools and scripting.Review and debug code.Perform validation and verification testing.Collaborate with internal teams and vendors to fix and improve products.Document development phases and monitor systems.Minimum Qualifications:Bachelor's Degree from an accredited college or university in Computer Science or related discipline from an accredited college or university is required Or 4 additional years of experience may be substituted in lieu of a degree.3 years of experience in software development/engineering in programs and contracts of similar scope, type, and complexity.Strong programming skills in one or more languages (e.g. Go, Python, Java)Familiarity with CI/CD pipelines and GitOps principlesHands-on experience with container technologies (Docker, containerd) and orchestration tools (Kubernetes, Helm).Certification requirements:One or more of the following is required or must be able to obtain one:AWS Certified Solutions Architect AssociateAWS Certified SysOps AdministratorAWS Certified Solutions Architect ProfessionalAWS Certified DevOps Engineer ProfessionalCertified Kubernetes Application DeveloperCertified Kubernetes AdministratorClearance Requirements:Must have current/active TS/SCI w PolygraphPhysical Requirements:Must be able to remain in a stationary position 50%.Constantly operates a computer and other office productivity machinery, such as a calculator, copy machine and computer printer.The person in this position frequently communicates with co-workers, management, and customers, which may involve delivering presentations.

General Summary of PositionJob Summary:Perform complex preventive maintenance and corrective repair of buildings, industrial systems, vehicles, equipment, and grounds. Working under limited supervision, monitors building system operations and performance. Utilizes several trade skills such as carpentry, plumbing, electrical, painting, roofing, heating, and cooling.Join one of the largest healthcare systems in the Baltimore-Washington metro region, also recognized as one of the "Healthiest Maryland Businesses". Apply today and learn how MedStar Health can be your next great career move!Primary Duties:Complies with all applicable codes, regulations, governmental agency, and Company directives related to building operations and work safety.Oversees and inspects the work performed by outside contractors. Contracted work includes landscaping, snow removal, remodeling, HVAC, plumbers, and cleaning.Inspects building systems including fire alarms, HVAC, and plumbing to ensure operation of equipment is within design capabilities and achieves environmental conditions prescribed by client.Performs assigned repairs, emergency, and preventive maintenance. Completes maintenance and repair records as required.Reviews assigned work orders. Estimates time and materials needed to complete repair. Orders necessary materials and supplies to complete all tasks.Maintains the building lighting system, including element and ballast repairs or replacements an performs welding, carpentry, furniture assembly and locksmith tasks as needed.Maintains an energy management program to ensure measures are taken to operate all systems in the most efficient manner to keep operating costs at a minimum and responds quickly to emergency situations, summoning additional assistance as needed.Qualifications:High School Diploma or GED required.Minimum of four years of related experience and/or trade school training required.Engineer 2nd Grade - ENG 2NDG Maryland State 1st or 2nd Class Stationary Engineer License required.CFC Refrigeration Certification Universal CFC certification required.This position has a hiring range of $30.67 - $54.48

WHO WE AREAs the nation's largest producer of clean, carbon-free energy, Constellation is focused on our purpose: accelerating the transition to a carbon-free future. We have been the leader in clean energy production for more than a decade, and we are cultivating a workplace where our employees can grow, thrive, and contribute. Our culture and employee experience make it clear: We are powered by passion and purpose. Together, we're creating healthier communities and a cleaner planet, and our people are the driving force behind our success. At Constellation, you can build a fulfilling career with opportunities to learn, grow and make an impact. By doing our best work and meeting new challenges, we can accomplish great things and help fight climate change. Join us to lead the clean energy future.TOTAL REWARDSConstellation offers a wide range of benefits and rewards to help our employees thrive professionally and personally. We provide competitive compensation and benefits that support both employees and their families, helping them prepare for the future. In addition to highly competitive salaries, we offer a bonus program, 401(k) with company match, employee stock purchase program comprehensive medical, dental and vision benefits, including a robust wellness program paid time off for vacation, holidays, and sick days and much more.Expected salary range of $152,100 to $169,000, varies based on experience, along with comprehensive benefits package that includes bonus and 401(k). PRIMARY PURPOSE OF POSITION Provide management of the engineering function of accountability. PRIMARY DUTIES AND ACCOUNTABILITIESProvide management of the engineering function with respect to station needs and regulatory requirements.Manage the performance and development of assigned engineering personnel relative to site and corporate objectives and provide focus on the attainment of high-quality engineering results.Directly and through subordinates, fulfill engineering and technical leadership accountability regarding short-term and long-term programs that impact site operations.Participate as in Business Planning, Budget, and Business Performance review regarding assigned staff.Participate as senior resource to NGG-wide programs and initiatives regarding standardized and enhanced engineering systems and processes.MINIMUM QUALIFICATIONSBS in Engineering or License Professional Engineer Minimum of 5 years related experience with commercial or military nuclear power plant or other utility experienceDemonstrated technical leadership (e.g. Duty Team Lead, Inspection Lead)Teamwork and accountable to achieving positive resultsPositive Leadership Assessment PREFERRED QUALIFICATIONSProfessional Engineering RegistrationDesign Engineering experienceAdvanced technical degree, MBA

What you will do Johnson Controls has a phenomenal opportunity for a Senior Controls Engineer to join our dynamic team in New Freedom, PA, to help ensure the reliability and performance of our cutting-edge Chiller products. Preference given to candidates residing within a commutable distance to New Freedom, PA, or willing to relocate.Johnson Controls Advanced Development and Engineering Center (JADEC)As part of the Johnson Controls Building Efficiency business, the Controls & Systems Engineering team applies this mission to buildings, providing solutions for a more comfortable, safe, and sustainable building environment for owners and occupants. The Senior Controls Engineer will join the team that develops advanced controls for Chillers and Smart Building products used by our customers to run their buildings and manage their energy costs. Get ready to work as part of a close-knit team of experienced engineers and apply and enhance your engineering development skills to develop applications, products, and tools! Interesting right Keep reading!How you will do itThe candidate will perform duties as a Data Center Controls engineer.As a member of the Controls & Systems Engineering team, the candidate will work with other engineers in developing, testing, and supporting controls for Chiller Solutions’ products.This individual must be an analytical thinker and be disciplined in applying robust design methodologies and engineering principles (modeling, simulation, statistics, data acquisition, etc.) to develop and realize equipment control solutions.This individual must be self-motivated and able to work independently but must also be able to interface directly with electronics engineers, mechanical engineers, software developers, systems engineers, and research engineers to develop system-wide solutions.This role will work with peers and specialists across disciplines to meet shared product milestones. In addition, the position will be responsible as lead for complex projects, which will involve implementation, reviewing work products, and mentoring junior engineers and interns.What you will needRequiredA qualified individual shall have a minimum of aBSin Controls Engineering, Electrical Engineering, or related field.Model Based Design with Code Generation 5+ years.Model Based Design Automated Test 5+ years.MATLAB/Simulink 5+ years of work experience. Experience working with and producing control and system requirementsspecifications and documentation.Industry experience outside of Chiller HVAC is acceptable, including equipment or machine manufacturing. Strong team-building skills to support fast-paced product delivery methodologies.#Controlsengineer#Systemsengineer

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: PRIMARY PURPOSE OF POSITIONThe Sr OT Systems Security Engineer (OTSSE) will support implementation of the Operational Technology (OT) Security Governance program and provide proactive cyber security risk management. The OTSSE will act as a liaison to OT teams, Security Architects and other CISS teams to effectively communicate and lead OT security engineering design specification, architecting and implementing effective OT security solutions. The OTSSE will also assist with vulnerability mitigation plans, incident response, and security event monitoring engineering support. The OTSSE will ensure the implementation of OT security measures in accordance with established procedures to ensure safety, reliability, confidentiality, integrity, availability, authentication, and non-repudiation, and will perform OT security reviews to identify gaps in security design and architecture.Note: This is a hybrid position (in-office with remote flexibility). Employees are required to be in office at least three days per week (Tuesday, Wednesday, and Thursday). This position must sit out of our Baltimore, MD, Newark, DE, Owings Mills, MD or Kennett Square, PA office. This position is NOT eligible for relocation assistance. Primary Duties: PRIMARY DUTIES AND ACCOUNTABILITIESProvide analytical and technical security recommendations to other team members, technical teams, and business clients, including: Provide OT cyber security guidance to leadership. Work with stakeholders to design OT security design specifications and architectures. Provide input to implementation plans and standard operating procedures as they relate to OT cyber security.Develop specific OT cyber security countermeasures and risk mitigation strategies for systems and/or applications.Work closely with technical teams to implement effective security configurations/requirements, including:Analyze and design security measures to resolve OT vulnerabilities, mitigate risks, and recommend security changes to system or system components as needed.Mitigate/correct security deficiencies identified during Factory Acceptance Testing, Site Acceptance Testing, and/or recommend risk acceptance for the appropriate senior leadership. Verify and update security engineering documentation reflecting the application/system security design features. Verify minimum security design specifications are in place for OT assets to support security event monitoring and incident response.Work closely with the R&D and innovation teams to ensure secure implementation of OT systems into production. (Assist with vulnerability mitigation planning, incident response and security event monitoring engineering activities for security and compliance requirementsConduct engagement and provide OT cyber security training to OT personnel Job Scope: JOB SCOPEThe Senior Operational Technology Systems Security Engineer (OTSSE) will work closely (and primarily) with business OT teams, IT/Utility communications, Engineering and OT clients to implement effective security configurations and requirements; provide analytical and technical security recommendations to other team members, technical teams, and business clients; support OT Security Governance efforts; meet with Exelon business clients and management to help specify and negotiate system/network/application security requirements; work with the R&D and innovation teams to ensure secure implementation of OT systems into production; develop OT security solutions to improve security event monitoring and detection with CISS standards; actively participate in relevant industry OT cyber security workgroups and forums; act as a liaison to business OT teams, Security Architect and IT/UComm, and OT stakeholders to effectively communicate and lead OT security engineering design specification, architecting and implementing effective OT security solutions; develop documentation to support ongoing OT security systems operations, maintenance, and problem resolution; advise on vulnerability mitigation plans, and develop security event monitoring solutions to improve incident detection; work with the Security Policy and Risk Office to assist with the identification, analysis, and remediation of Exelon OT cyber security risk Minimum Qualifications: MINIMUM QUALIFICATIONSBachelors Degree in Computer Science, engineering, or a related discipline, and typically 5 or more years of solid, diverse experience in OT/ICS, or equivalent combination of education and work experience. At least 3 years of demonstrated experience in the energy sectorAt least 5 years of demonstrable security engineering or related experience, including: Knowledge of disaster recovery continuity of operations plans Knowledge of Risk Management Framework (RMF) requirements Knowledge of incident response and handling methodologies. Knowledge of network security architecture concepts including topology, protocols, components, and principles Knowledge of authentication, authorization, and access control methods. Knowledge of cryptography and cryptographic key management concepts Knowledge of database systems Knowledge of embedded systems Knowledge of system fault tolerance methodologies Knowledge of how system components are installed, integrated, and optimized Knowledge of ICS supply chain security and risk management policies, requirements, and procedure Knowledge of human-computer interaction principle Knowledge of cybersecurity principles and organizational requirements (relevant to confidentiality, integrity, availability, authentication, non-repudiation) Ability to design architectures and frameworks Skill in applying cybersecurity methods, such as firewalls, demilitarized zones, and encryption Knowledge of network access, identity, and access Knowledge of network protocols such as TCP/IP, Dynamic Host Configuration, Domain Name System (DNS), and directory services Knowledge of network design processes, to include understanding of security objectives, operational objectives, and tradeoffs Knowledge of parallel and distributed computing concepts Knowledge of key concepts in security management (e.g., Release Management, Patch Management) Knowledge of configuration management techniquesComprehensive understanding of change management techniques associated with new technology implementation.Demonstrated experience producing an economic business case.Demonstrated leadership ability.Proven analytical, problem solving, and consulting skills.Excellent communication skills and the proven ability to work effectively with all levels of OT and business management. Preferred Qualifications: PREFERRED QUALIFICATIONSGraduate degree in cyber security, engineering, or related area of expertise.Relevant security certifications (CISSP, CISM, GICSP)At least 3 years of experience as part of an electric utilityAppropriate technical skills and in-depth knowledge of business unit functions and applications, including:Demonstrated experience and subject matter knowledge of SCADA, ICS, Distribution Automation, Smart Grid, DMS, and ECS systems architecture.Demonstrated experience and subject matter knowledge of security vulnerabilities and mitigation strategies for industrial SCADA protocols such as DNP3, IEC-61850, Modbus, Tejas V, CDC 2, Vancomm, etc.Demonstrated experience in security risk assessments, requirements development, secure design analysis, architecture assessment and development, and security testing of applications and systems.Extensive experience developing, evaluating, and implementing OT security architectures, technologies, standards, and practices to secure applications and OT.Demonstrated knowledge and experience in the implementation of governance frameworks and security risk management processes, such as NIST, ISO, ISA99, IEC 62443 guidelines and standards.Demonstrated experience in addressing regulatory compliance for the security requirements in applicable laws and regulations, such as NERC CIP, CFATS, or API 1164.Demonstrated experience and subject matter knowledge in cyber security for applications, web architectures, operating systems, databases, and networks.Knowledge and experience in application security standards, methodologies, and technologies.Solid capability to assess network architectures and operating systems for vulnerabilities and develop appropriate security countermeasures.Solid knowledge and experience with OT security aspects of operating systems, embedded operating systems, Programmable Logic Controllers (PLC), Remote Terminal Units (RTU), and Protection and Control relays.Experience in assessing security applications and systems, such as firewalls, security appliances, IDS/IPS, SSL or TLS, IPSec.Ability to demonstrate analytical skills, technical knowledge, and practical application of cyber and information security principles to business leaders and technical staff. Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $102,400.00/Yr. – $140,800.00/Yr. Annual Bonus for eligible positions: 15% 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

ManTech is seeking a highly skilled and motivated Cyber Detection and Response Analyst to join our dynamic Cyber Incident Response Team. As a key member of the team, you will be responsible for proactively monitoring, detecting, analyzing, and responding to cybersecurity incidents within our large enterprise network. Your expertise in incident detection, analysis, and response will play a vital role in safeguarding our organization's critical assets and ensuring the integrity of our information systems.Responsibilities include, but are not limited to:Incident Detection and MonitoringUtilize SIEM (Security Information and Event Management) systems and other detection technologies to identify and investigate security anomalies.Collaborate with other teams to establish and fine-tune detection rules and alerts.Incident Analysis and InvestigationConduct in-depth analysis of detected incidents to determine the nature, extent, and impact of the cybersecurity threats.Perform forensic analysis, including examining network traffic, log files, and system artifacts, to identify the root cause and potential entry points of incidents.Document incident findings, including the attack methodology, IOCs, and recommended mitigation measures.Collaborate with cross-functional teams, such as network engineers, system administrators, and legal representatives, to gather and analyze relevant information during incident investigationsIncident Response and MitigationExecute the incident response process, following established procedures and protocols, to contain, mitigate, and remediate security incidents.Coordinate with internal teams and external stakeholders to ensure a swift and effective response to incidents, including communication, containment, and recovery activities.Utilize incident response tools and technologies to facilitate the investigation, containment, and eradication of threats.Provide recommendations for remediation actions and improvements to security controls and processes based on incident findings and lessons learned.Threat Intelligence and Vulnerability ManagementStay up to date with the latest cybersecurity threats, vulnerabilities, and industry best practices.Monitor external sources for threat intelligence and emerging trends to enhance the organization's incident detection and response capabilities.Contribute to vulnerability management activities by assessing and prioritizing vulnerabilities and providing guidance on remediation strategies.Reporting and DocumentationPrepare clear and concise incident reports, including detailed timelines, analysis, and recommendations for senior management and relevant stakeholders.Maintain accurate and up-to-date documentation of incidents, investigations, actions taken, and lessons learned.Assist in the development and maintenance of incident response playbooks, procedures, and guidelines.Basic Qualifications:2+ years of experience in Cybersecurity, Information Technology , Computer Science or other relevant technical field; experience can be any combination professional experience, internships , lab work or coursework.Experience with one or more of the following: SIEM systems, network security tools, log analysis tools, cybersecurity principles, incident detection, analysis, and response methodologies, operating systems, network protocols, and security technologies.DoD 8570 IAT-II required (can be obtained after hire)Security Requirements: Active/Current TS/SCI with polygraph

***Consideration given to applicants residing within a commutable distance from New Freedom, PA or willing to relocate***Build your best future with the Johnson Controls team!What We Offer:Competitive salaryPaid vacation/holidays/sick time -15 days of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care -Available day oneExtensive product and on the job/cross training opportunitiesWith outstanding resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat You Will Do:The Sr Engineer is responsible to contribute to the product team through product design, testing, data analysis, and project management. The Sr Engineer will also support the manufacturing and sustaining of the product including initiating and executing design changes. All these tasks also require strong communication skills and the ability to clearly present information to engineering teammates, engineering managers, and product management. This role will be based in the Johnson Controls Advanced Development Engineering Center (JADEC), take a lookJohnson Controls Advanced Development and Engineering Center (JADEC)How You Will Do It:Maintains understanding of theories, concepts, technical principles and processes related to fluid, thermal, and other mechanical aspects of water-cooled chillersContributes to the on-time completion of programs and regularly reports on the status of projectsHas proficiency in mechanical design and be able to conceptualize and implement design ideas into the productApplies mechanical codes such as UL, CE, PED and ASMEWork closely with the design and manufacturing teams in generating layout concepts and system configurations that consider the best balance of cost, performance, and reliability.Coordinate and help execute test programs to validate performance and reliability of mechanical systems and componentsAnalyzes, designs, modifies and/or troubleshoots mechanical sub-components and sub-systems based on test dataGenerate and review technical documentation for use within the product teamOccasional domestic and international travel (less than 10%)Teamwork and the ability to work with many teams is critical in our global product development environment. Each of these virtues must be consistently displayed with a focus on continual improvement of our team cultureWhat We Look For:RequiredBS in Engineering or related scienceMinimum 4 years of experience in HVACR or related fieldProficient with organizing and processing large amounts of dataExperience with product development and sustaining of configurable systemsPreferredStrong understanding of fluid and thermal principlesExperience with fluid dynamics and heat transferPackaged systems#ProductEngineer#Hiring

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: The IT Sr Systems Engineer I position serves as a senior technical role within the IT department. It requires demonstrated experience of information technology, problem-solving skills, and the ability to work effectively both independently, as a mentor and as part of a team. Candidate will possess the self-motivation, experience, and skills to serve by providing technical insights driving the design, implementation, and optimization of complex systems under the guidance of a Principal Engineer or Manager. Collaborates with IT architecture to define strategy and work with various teams to implement high quality systems to meet business requirements. Delivers and supports IT infrastructure, product and platform solutions. Designs and delivers complex IT system initiatives, to include cloud, non-cloud and hybrid-cloud systems. Influences other IT teams, leadership, enterprise business partners, vendors and project/design teams, in all aspects of the secure & reliable hosting of applications throughout Exelon's large & complex enterprise and real time operational environments.Build and Deployment:Strong problem-solving and analytical skills to understand and address build issues.Effective communication skills to collaborate with stakeholders (business, intake and development teams, etc.), and understand the requirements to produce quality functional automations within the defined timeline.Manage and execute the build and deployment processes for automation projects.Collaborate with development teams to understand business application configurations and dependencies.Exercise best practices to implement and maintain version control practices for automation artifacts and code standards.Ensure that version control best practices are followed.Develop and maintain automation scripts for the build and deployment processes.Work closely with development to understand release requirements.Coordinate and manage the release process, ensuring that automation solutions are deployed successfully.Ability to troubleshoot and resolve build and deployment related issues.Prepare build and deployment documentation for code releases.Maintain build and deployment documentation to support automation enhancements.Well-versed with utilizing CI/CD pipelines for automation deployments.Note: This is a hybrid position (in-office with remote flexibility). Employees are required to be in office at least three days per week (Tuesday, Wednesday, and Thursday).Candidate must sit within our service territories in IL, MD, PA, DE, DC & NJ. No relocation will be provided. Primary Duties: Leads discussions with business partners and vendors to gather information. Consults with leadership, architecture, project teams and end users to identify system requirements and perform feasibility analysis on potential changes related to existing and future security and technical architectures. Writes and disseminates system specifications, logical & physical architecture diagrams, and implementation plans. Delivers practical, efficient, and cost-effective solutions that satisfy business needs, including hands-on configuration, troubleshooting and optimization and supporting metrics for the same. (30%)Work closely with others to develop future plans, resource requirements, migration strategies, and project schedules. Creates and delivers presentations to Engineering and Architecture Review Boards. Possesses deep understanding of current technologies and service offerings within the industry. Provides oversight for less experienced engineers (25%)Design, support and maintain custom system integration with other platforms, specific to the needs of the customers. Maintain relevancy and knowledge in current and evolving emerging IT systems technologies. (20%)Ensure all risks and issues are identified and are captured following set process and are actioned appropriately. Responsible to provide supporting data to leadership and peers. (15%)Maintains knowledge of and compliance with preferred technologies, debugging and problem-solving skills; participates in peer code reviews. (10%) Job Scope: Designing, delivering, documenting, and supporting infrastructure systems.Maintains deep knowledge of technology and its application across our business areas or for our customers.Leads in technological innovation to drive new business opportunities and solve complex business problems.Requires advanced skill set and proficiency in discipline.Conducts work assignments of higher complexity, under occasional supervision with latitude for independent judgment.Creates and contributes to a development-centric work environment where employees are challenged, coached and engaged.May lead and supervise interns and apprentices or serve as peer coach. Minimum Qualifications: Bachelor's Degree in Computer Science, Information Systems, Computer Networking 4 - 7 years' experience in IT infrastructure design, application design, cloud computing, disaster/recovery, or 7+ years of relevant experience in lieu of degree.Experience with system administration.Demonstrated ability to design and document processes & procedures.Experience transitioning work to operational teams.Maintained proficiency in programming languages commonly used in automation, such as Python, Java, or .NET.Experience with automation tools and platforms like HPOO, UiPath, Blue Prism, or Automation Anywhere.Knowledge of version control systems (e.g., Git) and build automation tools.Demonstrated competence with business acumen within own discipline or function.Demonstrated ability to solve complex problems.Demonstrated ability to effectively communicate highly technical information in non-technical terminology (written and verbal).Demonstrated ability to build and maintain relationships with strong teamwork skills.Demonstrates ability to influence up down and across.Drives innovation by leveraging alternative perspectives and emerging technologies to deliver creative solutions.Demonstrated ability to deliver work aligning to project management principles & framework.Demonstrated ability to provide financial impact analysis.Troubleshooting & Monitoring: Solid understanding of the capabilities of standard monitoring tools. Can make informed decisions on monitoring settings such as sample size, level of criticality, and some self-healing opportunities.Cloud Technologies: Build and maintain knowledge of new technologies or technology opportunities and assists in development of analysis of their use for business and/or IT clients.Security Basics: Ability to evaluate a solution against current security requirements and future industry trends.Scripting & Automation: Able to use PowerShell, Ansible, or another appropriate scripting tool to automate common tasks/create reports and troubleshoot issues with existing scripts. Preferred Qualifications: Deeper understanding of programming languages, and an ability to solve engineering problems of increasing difficulty.Shows initiative beyond pure implementation.Experience building highly scalable applications.Education and Qualifications:HPOO TrainingsUiPath Advanced Automation Developer Professional CertificationUiPath Automation Cloud CertificationRPA Development: Minimum 2-5 years of experience in developing and deploying RPA solutions.Project Management: Experience in managing end-to-end RPA projects, including requirement gathering, solution design, development, testing, and deployment.Process Analysis: Proficiency in analyzing business processes and identifying automation opportunities.Documentation: Experience in creating detailed documentation of automation processes and technical specifications.Compliance: Knowledge of regulatory and compliance standards relevant to the industry.Testing: Experience in unit testing, integration testing, and user acceptance testing (UAT).Change Management: Understanding of change management processes and ability to implement them effectively. Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $107,200.00/Yr. – $147,400.00/Yr. Annual Bonus for eligible positions: 15% 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: PRIMARY PURPOSE OF POSITIONDevelops studies, plans, criteria, specifications, calculations, evaluations, design documents, performance assessments, integrated systems analysis, cost estimates, budgets, associated with the planning, design, licensing, construction, commissioning, operation, and maintenance of Exelon's electric generation, transmission, distribution, gas and telecommunication facilities/systems. Provides consultation and recommendations to the Company within and to other business units and/or customers as a result of studying company or customer-owned systems, processes, equipment, vehicles or facilities. Reviews financial data from budget and actual costs of projects. Operates independently and seeks guidance when appropriate. Position may be required to work extended hours for coverage during storms or other energy delivery emergencies.**Posting Notes** This position is in the BSC Transmission Operations Support - Compliance & Procedures group. The team supports the Exelon TSO Control Rooms with reviewing, updating, and creating Procedures and Job Aids as well as ensuring compliance to all applicable NERC Standards. Support includes documenting and tracking evidence of Compliance and participating in Compliance Audits by PJM as well as Reliability First. May be required to assist with training on procedures at times. A compliance background and or experience in any Transmission & Substation Organizations, Operations, or Control Room environment is desirable. There is opportunity to utilize automation tools and innovation for efficiency. The position is based out of our Exelon facility in Woodlawn, MD and some travel is required.Note: This is a hybrid position (in-office with remote flexibility). Employees are required to be in office at least three days per week (Tuesday, Wednesday, and Thursday). This position must sit out of our Woodlawn, MD office. This position is not eligible for relocation assistance. Primary Duties: PRIMARY DUTIES AND ACCOUNTABILITIESPerforms engineering tasks associated with critical engineering projects or a number of small projects with many complex features.Performs assignments in areas where engineering precedents are incomplete, lacking or require broad experience.Evaluates, develops and implements projects that have moderate financial and operational impact.May serve as an expert for organization in a specific area or responsibility that may include the delivery of classroom training and/or OJT/OJE. Job Scope: JOB SCOPEInfluences project decisions having a moderate impact on the company that may include leading employees or contractors in the commissioning of electrical systems and equipment to be placed On System. Applies technical knowledge to help promote a safe work environment and to enhance customer satisfaction. Minimum Qualifications: MINIMUM QUALIFICATIONS Bachelor of Science degree in Engineering or Licensed Professional Engineer (2) (3) Ability to analyze and interpret complex electrical and mechanical systems.Knowledge and ability to apply problem solving approaches and engineering theoryKnowledge of engineering designs, principles and practices.Knowledge of complex field test equipment. 4-7 years of professional engineering experience (1) (3) (See Note).Broad knowledge and experience with regulations, guides, standards, codes methods, practices, and advanced engineering principles necessary to perform very complex or unique assignments for a specificMinimum of two related career experiences (4) (i.e., changes in technical job responsibilities, which may or may not include a change in department) OREngineer in Training OR50% complete (by hours) with advanced technical degree, M.B.A. or Project Management Certification(1) Master's degree in Engineering reduces the OJT experience requirement by 1 year. (2) License must be issued by the state in which you are practicing. (3) PE License reduces the OJT experience requirement by 1 year. (4) Career related experiences is defined as changes in technical job responsibilities and does not have to include a change in department Note: Items (1) and (3) are mutually inclusive, whereby the maximum experience requirement reduction is one(1) year (e.g., in the case of an employee with both a master's degree in Engineering AND a PE license, the minimum experience requirement would be reduced by one (1) year). Preferred Qualifications: PREFERRED QUALIFICATIONSGraduate degree (1) or Graduate level work in Engineering, Business Administration or Project Management CertificationLicensed Professional Engineer (2) (3)Strong teamwork, interpersonal skills and the ability to communicate with all management levels.Strong written and oral communication skills. Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $90,400.00/Yr. – $124,300.00/Yr. Annual Bonus for eligible positions: 15% 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

Build your best future with the Johnson Controls team!Who We Are:YORK® Chiller Solutions from Johnson Controls, help customers respond to building efficiency needs by providing the widest variety water and air-cooled industrial and commercial chillers on the market. From reducing a facility’s carbon footprint, to delivering a healthier indoor environment and cutting energy costs, we build smaller, more energy efficient chillers tailored to fit almost any comfort or process cooling application – even heating. Candidates must be commuting distance to New Freedom, PA, or willing to relocate.Take a look at where you'll work! Johnson Controls Advanced Development and Engineering Center (JADEC)What You Will Do:This position is within the water-cooled chiller contract engineering team. We are seeking a hands-on engineer to work on contract chiller sales orders, and interface with our design team as needed. This role will focus on providing wiring diagrams, panel diagrams, instrumentation, and possibly system wiring components.How You Will Do It:As Electrical Engineer within our Chillers product development team, you will be responsible for electrical analysis, detailed design, and control, as well as overall electrical performance of sophisticated water-cooled chillers components and systems, including providing support to manufacturing and design and drafters. In this role you will work on providing wiring diagrams, panel diagrams, instrumentation (BOMs), ECNs, and possibly system wirings in time. This position is not eligible for Visa sponsorship.What We Look For:RequiredBS in Electrical Engineering, or EMET and or related science.Minimum 3 years’ experience (BS degree) in a related field and directly handling Hazardous Environments jobs.Ability to read, understand, and create electrical and control schematicsAbility to troubleshoot and debug electrical and control circuitsUnderstanding of process and machine control fundamentalsAbility to manage details of technical requirements including task assignments, tracking and communicationsAbility to create electrical schematics and panel design layoutsAbility to manage workload effectively (planning, organization, communication of tasks)Strong teamwork skills (will be part of multidisciplinary teams working major developments)Knowledgeable around different Comms Protocols (RS485, RS232, Ethernet)Experience with CAD tools and 3D modeling (AutoCAD and CERO or SolidWorks)Experience creating Harness & Power Distribution DrawingsExperience with Hazardous Environments and the requirements needed for Electrical designs and safety requirements. (Class 1, DIV 1; and Class 1, DIV 2)Preferred:Refrigeration system knowledge (chillers, heat pumps, etc.)Mechanical aptitude (connection to the "system" they're controlling)Experience with creating BOMsGood trainer in CAD tools (inexperienced employee(s) could benefit from partnering with this candidate)ERP Experience (SAP preferred)P&ID ExperienceCreo Cabling Experience#ElectricalEngineer#LI#Hiring

ManTech seeks a motivated, career and customer-oriented NetworkEngineer, to join our team in Hanover, MD. The team delivers enterprise infrastructure capabilities for a global workforce performing a wide range of missions in defense of our Nation. This effort is the contract vehicle for the Enterprise Infrastructure Services organization overseeing MPO’s Enterprise Information Technology (EIT). EIT is MPO’s backbone- platform for all Enterprise users. Data Center & Compute Services is the EIS enabling organization working with customers, Integrated Product Teams (IPT), and vendors to deliver select EIT.Responsibilities Included but are not limited to:Responsible for supporting customer networks involving cross-domain solutions, including VPNs, one-way data transfers, unclassified mission related infrastructures, and Taclane 175 encryption devices. Specific configurations include routing using MPLS/VPLS, OSPF, EIGRP at the Core and Distribution devices and switching at the Access devices.Responsible for performing planning, deployment and quality assurance functions for system and network upgrade projects.Will develop high, mid and lower-level diagrams and schematics to document the system and network infrastructure for planning, historical and continuity purposes.Responsible for designing, installing, configuring, troubleshooting and maintaining a LAN/WAN equipment required to provide telecommunications services in a complex environment consisting of various Cisco network equipment to include Nexus and Catalyst model as well as Integrated Service Routers.Responsible for designing networks utilizing switching technology to include VLAN, Inter-VLAN routing, trunking, and port aggregation on the WAN/LAN environment.Minimum Qualifications: High school diploma with twenty (20) years of relevant experienceExperience managing the project work as defined by the government.Experience leading medium to large complex projects and major phases of very large projects while providing highly technical and specialized guidance and solutions to complex IT problems.Preferred Qualifications: Associates degree with fifteen (15) years of relevant experience or bachelor’s degree with twelve (12) years of relevant experience.Experience providing support for customer networks involving cross-domain solutions, including VPNs, one-way data transfers, unclassified mission related infrastructures, and Taclane 175 encryption devices. Specific configurations include routing using MPLS/VPLS, OSPF, EIGRP at the Core and Distribution devices and switching at the Access devices.Experience configuring and troubleshooting Cisco catalyst switches (Spanning Tree, Port Security, VTP,Ether channels, VLANs).Experience configuring and troubleshooting Cisco ASR routers (including HSRP, OSPF, BGP, route-map and Cisco ASA firewalls.Experience troubleshooting various DNS, SMTP, IP routing, latency, and connectivity issues; Implement TCP/IP & related services-DHCP/DNS. Install/Upgrade Cisco Switches and Firewalls (ASA) IOS using TFTP. Maintain all LAN/WAN connectivity, Document network problems and resolution for future reference.Experience with Linux network troubleshooting tools and features to solve complex network issues (tcpdump, ssldump, curl, wget, mtr, tcp traceroute, nmap, openssl, tshark ,QoS, MPLS, BGP, VoIP, Security, etc.) Clearance Requirements:Must have a current/active TS/SCI w/ Polygraph. Physical Requirements: Bending, carrying, kneeling, lifting, light work up to 20 lbs., reaching, repetitive motions, sedentary work, walking, working with data, ability to handle stress & work under pressure, ability to use MS Office, ability to use a PC, analytical or critical thinking skills, interpersonal & people skills, leadership skills, listening skills, multi-tasking ability, oral & written communication skills, organizational skills.

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: PRIMARY PURPOSE OF POSITIONDevelops and/or leads teams in studies, plans, criteria, specifications, calculations, evaluations, design documents, performance assessments, integrated systems analysis, cost estimates, budgets, associated with the planning, design, licensing, construction, commissioning, operation, and maintenance of Exelon's electric generation, transmission, distribution, gas and telecommunication facilities/systems. Provides consultation and recommendations to the Company within and to other business units and/or customers as a result of studying company or customer-owned systems, processes, equipment, vehicles or facilities. Reviews financial data from budget and actual costs of projects. Provides technical expertise to strategic, legislative and operational decisions. Participates in creating, updating, and applying internal/industry standards and technology in a specialized area of expertise. Trains and mentors others. Position may be required to work extended hours for coverage during storms or other energy delivery emergencies.**Posting Notes**This position is in the BSC Transmission Operations Support - Compliance & Procedures group. The team supports the Exelon TSO Control Rooms with reviewing, updating, and creating Procedures and Job Aids as well as ensuring compliance to all applicable NERC Standards. Support includes documenting and tracking evidence of Compliance and participating in Compliance Audits by PJM as well as Reliability First. May be required to assist with training on procedures at times. A compliance background and or experience in any Transmission & Substation Organizations, Operations, or Control Room environment is desirable. There is opportunity to utilize automation tools and innovation for efficiency. The position is based out of our Exelon facility in Woodlawn, MD and some travel is required.Note: This is a hybrid position (in-office with remote flexibility). Employees are required to be in office at least three days per week (Tuesday, Wednesday, and Thursday). This position must sit out of our Woodlawn, MD office. This position is not eligible for relocation assistance. Primary Duties: PRIMARY DUTIES AND ACCOUNTABILITIESLeads and performs assignments in specialized areas requiring extensive engineering expertise. Requiring maintaining state of the art engineering credential in the specialized technical area.Leads and performs engineering tasks and projects associated with a critical or analytical engineering project or a small number of complex projects that require specialized knowledge in many areas, may include field testing troubleshooting, and peer review.Evaluates, develops, implements and leads projects that have significant financial and operational impact, may also develop initial commissioning plans. Plans, writes and performs tasks for documentation deliverables and projectsParticipates in department planning, through field/site walkdowns, attend meetings/conference calls, provide budget recommendations and monitor performance for the accomplishment of committed results.Performs assignments while acting independently, and may lead multi-discipline teams, may include providing direct oversight of contractors.Serves as an expert in specialized area.Acts as an expert witness or provide expert opinions as required.Provides recommendations to management and implements action plans to improve performance and cost effectiveness.Provides detailed technical training, mentorship, peer review, and/or guidance to others.Participates in technical and industry societies and committees to enhance knowledge of new technologies or issues in areas of company interest, make recommendations for business decisions regarding strategy for new technologies and/or engineering techniques and tools. Job Scope: JOB SCOPEInfluences project decisions having a significant impact on the company.Applies technical knowledge to help promote a safe work environment and to enhance customer satisfaction Minimum Qualifications: MINIMUM QUALIFICATIONSBachelor of Science degree in Engineering or Licensed Professional Engineer (2) (3) Knowledge of engineering designs, principles and practicesAbility to analyze and interpret complex electrical and mechanical systems.Knowledge and ability to apply problem solving approaches and engineering theory.Detailed knowledge of applicable standards, codes methods, and practices unique to areas of expertise. 7+ years of professional engineering experience (1) (3) (See Note 3. Thorough knowledge and experience in unique areas of engineering expertise. Ability to apply advanced engineering principles to identify and resolve complex issues. Minimum of three related career experiences (4) (i.e., changes in technical job responsibilities, which may or may not include a change in department) OR Lead Member of a recognized industry committee OR Professional Engineer's License (2), advanced technical degree, MBA or Project Management Certification (1) Master's degree in Engineering reduces the OJT experience requirement by 1 year. (2) License must be issued by the state in which you are practicing. (3) PE License reduces the OJT experience requirement by 1 year. (4) Career related experiences is defined as changes in technical job responsibilities and does not have to include a change in department.Note: Items (1) and (3) are mutually inclusive, whereby the maximum experience requirement reduction is one (1) year (e.g., in the case of an employee with both a master's degree in Engineering AND a PE license, the minimum experience requirement would be reduced by one (1) year). Preferred Qualifications: PREFERRED QUALIFICATIONS Graduate degree (1) or Graduate level work in Engineering, Business Administration or Project Management Certification Licensed Professional Engineer (2) (3) Strong teamwork, interpersonal skills and the ability to communicate with all management levels. Strong written and oral communication skills. A working knowledge of analysis software packages such as CYMDIST, PSS\E, Python, PSCAD, MATLAB, etc. Ability to analyze industry wide trends and implement enhancements. Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $100,800.00/Yr. – $138,600.00/Yr. Annual Bonus for eligible positions: 15% 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

***Consideration given to applicants residing within a commutable distance to New Freedom, PA or willing to relocate***What You Will Do:Our Test Engineer will oversee product testing throughout the test life cycle. This includes designing, planning, execution, and preliminary analysis of results. The Test Engineer must possess and/or have the ability to develop a working knowledge of HVAC/R equipment and its application and has experience with component or system testing, test procedure development, mechanical fluid or airflow system design, troubleshooting, and operation. our Test Engineers are required to execute the testing for individual test subjects in order to successfully and efficiently complete testing for the product area customer. In this role you will conceive, develop, and evaluate plans for solving complex testing challenges. The ideal candidate will have technical aptitude in HVAC. This position is not eligible for Visa sponsorship.How You Will Do It:Provide technical communications for Test Engineering to product customer(s).Plan and execute tests of chillers and components. This may include:Participate in the development of and/or receive and review test specifications from customer group; seek out and acquire needs from other areas/disciplines who may wish to benefit from testing a particular subject.Use input from the customer group(s) to facilitate test plans and identify resource (human, physical) requirements.Meet with product engineering, product management, product technical support, or equivalent groups to agree upon and issue test plans.Work within the Test Engineering team to schedule tests and required resources with regards to capacity limitation.Provide oversight and input to Test Technicians for set up of data acquisition software configurations.Work with labor, test support, and engineering resources to actively manage the test from set up to completion. This includes daily monitoring and planning, communication, direct data acquisition, review of data acquired, provide engineering analysis of data acquired, problem resolution, and other activities necessary in order to efficiently perform and complete testing in a timely fashion.Maintain a proficiency in understanding chiller test data to guide the customer engineering teams as necessary to acceptance or assist in explanation of data results.Drive the evaluation and creation of standard procedures, test standards, and processes using applicable engineering tools. This includes, but is not limited to LEAN, 6-Sigma, Value Stream Mapping, Design of Experiments (DOE), 5S, Gemba, Kaizen (continuous improvement), KPI analysis and development, PDCA (Plan, Do, Check, Act), and Root Cause Analysis.Use experience to develop new procedures, processes, and resources as necessary to provide more efficient, accurate, and advanced testing services for product customers.What We Look For:BS required in an engineering or engineering adjacent discipline.Preferred combination education and experience, three (3) years direct work experience in the following: HVAC/R equipment development, servicing or testing, good understanding of HVAC/R systems, concepts, and diagnostics.Ability to perform test data acquisition and data analysis, test troubleshooting and diagnostics, technical reporting, and related communication at various levels is required.Experienced in environments ranging from laboratory, manufacturing/testing facilities, and field sites.Able to work in fast-paced, schedule driven work environment and possess the agility/adaptability to quickly move from one task to another when required. Must be self-motivated.Strong communication skills; willing to confront issues in an open, efficient, and tactful manner.Strong group communication and presentation skills.Demonstrated use of engineering tools and concepts within a manufacturing or testing facility.Good computer and data analysis/management skills with proficiency in Microsoft Suite Applications (Word, Excel, Access, and PowerPoint) as well as internet software and e-mail.Preferred:Familiarity in one or more technical and operational disciplines within HVAC platform development.Background in engineering or development testing.#TestEngineer#Hiring

ManTech is currently looking for a System Engineer to join our team in the Hanover, MD area. In this role, you will develop derived requirements for Information Assurance Services (Confidentiality, Integrity, Non repudiation, and Availability); Basic Information Assurance Mechanisms (e.g., Identification, Authentication, Access Control, Accountability); and Security Mechanism Technology (Passwords, cryptography, discretionary access control, mandatory access control, hashing, key management, etc.).Responsibilities include, but are not limited to:Responsible for developing comprehensive SOA solutions. Will develop operational view, technical standards view, and system and services view for architectures using applicable DoDAF standards. Will develop system design alternatives that consider life cycle cost, reuse, complexity, risk, system expansion, and growth.Responsible for ensuring effective, periodic review and control of the evolving configuration of a system, both hardware and software components and associated documentation, during the life of the system while serving as a member of the CCBWill develop alternative courses of action, workarounds, and fall-back positions with a recommended course of action for each risk, and monitor and re-evaluate risks at appropriate milestones. Will monitor risks using earned value management (EVM) data. Will also conduct and/or approve end-to-end system trade analyses to optimize system operations over its life-cycle through the proper balance of non-functional system performance areas.Responsible for providing technical direction for the development, engineering, interfacing, integration, and testing of all components of complex hardware/software systems to include requirements elicitation, analysis and functional allocation, conducting systems requirements reviews, developing concepts of operation and interface standards, developing system architectures, and performing technical/non-technical assessment and management as well as end-to-end flow analysis.Will maintain knowledge of current and evolving agency, national, and international standards applicable to the system development of interest. Will apply and enforce use of suitable standards to ensure consistency and interoperability of developer hardware and software.As a participant within an Analysis of Alternatives (AoA) effort, recommend a preferred solution based on selection criteria adjusted for reasonableness and validity of assumptions, technology limitations, environmental impact, and life-cycle costs.Will see validated models, simulations, and prototyping to mitigate risk and reduce cost of system development. Will improve standard integration strategies based upon rationale for previous decisions that resulted in improved integration performance. Will fully define interfaces in terms of origination, destination, stimulus, and data characteristics for software; and electrical and mechanical characteristics for hardwareMinimum Qualifications:Bachelor’s Degree in Bachelor’s degree in System Engineering, Computer Science, Information Systems, Engineering Science, Engineering Management. 5 years of additional related experience may be substituted for a degree.20 years of related experience is requiredDemonstrated experience in planning and leading Systems Engineering effortsSecurity Clearance Requirements:Current/Active TS/SCI with PolygraphPhysical Requirements:Must be able to remain in a stationary position 50%.Constantly operates a computer and other office productivity machinery, such as a calculator, copy machine and computer printer.The person in this position frequently communicates with co-workers, management, and customers, which may involve delivering presentations.

Who We Are: We're powering a cleaner, brighter future.Exelon is leading the energy transformation, and we're calling all problem solvers, innovators, community builders and change makers. Work with us to deliver solutions that make our diverse cities and communities stronger, healthier and more resilient.We're powered by purpose-driven people like you who believe in being inclusive and creative, and value safety, innovation, integrity and community service. We are a Fortune 200 company, 19,000 colleagues strong serving more than 10 million customers at six energy companies -- Atlantic City Electric (ACE), Baltimore Gas and Electric (BGE), Commonwealth Edison (ComEd), Delmarva Power & Light (DPL), PECO Energy Company (PECO), and Potomac Electric Power Company (Pepco).In our relentless pursuit of excellence, we elevate diverse voices, fresh perspectives and bold thinking. And since we know transforming the future of energy is hard work, we provide competitive compensation, incentives, excellent benefits and the opportunity to build a rewarding career.Are you in Primary Purpose: PRIMARY PURPOSE OF POSITION Develops and/or leads teams of employees or contractors in studies, plans, criteria, specifications, calculations, evaluations, design documents, integrated systems analysis, associated with the testing, commissioning, planning, design, licensing, construction, operation, and maintenance of Exelon's electric generation, transmission, distribution, gas, telecommunication, P&C communication, facilities/systems. Provides consultation and recommendations to the Company within and to other business units and/or customers as a result of studying company or customer-owned systems, processes, equipment, or facilities. Acts as recognized technical authority in a specialized engineering area which may involve witnessing of Factory Acceptance Tests. Position may be required to work extended hours for coverage during storms or other energy delivery emergencies. Primary Duties: PRIMARY DUTIES AND ACCOUNTABILITIESLeads highly technical consultation and training through OJT/OJE (may include some class room instruction as well) on highly complex and unique technical areas requiring the application of advanced engineering principles and may require advanced knowledge of complex analog and digital field test equipment. (25%)Evaluates complex technical issues that require highly specialized knowledge in very specific areas and recommends actions or programs for their resolution which may necessitate the review/evaluation of engineering design documents. (25%)Leads the work activities of project teams and others on the implementation of large specialized technical projects and/or programs in order to develop studies, proposals, commissioning plans to support safely energizing and placing major utility and customer systems and equipment On System. (25%)Participates in technical and industry societies and committees to enhance knowledge of new technologies or issues in area of company interest. (10%)Participates in department/project management planning, and monitor performance for the accomplishment of committed results. (10%)Acts as an expert witness and provide expert opinions for internal committees. (5%) Job Scope: JOB SCOPEHighly influential on strategic management decisions that can have a major impact on the company. Support/Lead employees and or contractors in the execution of plans developed to initially energize utility or customer equipment/systems and placed On System.Set direction for the organization in regards to technical issues.Applies technical knowledge to help promote a safe work environment and to enhance customer satisfaction Minimum Qualifications: MINIMUM QUALIFICATIONSBachelor's degree in Engineering discipline with at least 7 years of professional engineering experience. (1) (3) (See Note)Completed Assignments and Projects showing evidence of:Ability to analyze and interpret complex electrical and mechanical systems.Knowledge and ability to apply problem solving approaches and engineering theory.Knowledge of engineering designs, principles and practices.Advanced knowledge and experience with regulations, guides, standards, codes, methods, practices, and advanced engineering principles (2).Advanced knowledge of latest technologies necessary to perform a variety of specialized unique or complex assignments for various installation types of services. *Note: there are a limited number of personnel available in the industry with the required knowledge, ability and experience. (1) Master's degree in Engineering reduces the OJT experience requirement by 1 year. (2) License must be issued by the state in which you are practicing. (3) PE License reduces the OJT experience requirement by 1 year. Note: Items (1) and (3) are mutually inclusive, whereby the maximum experience requirement reduction is one (1) year (e.g., in the case of an employee with both a master's degree in Engineering AND a PE license, the minimum experience requirement would be reduced by one (1) year. Preferred Qualifications: PREFERRED QUALIFICATIONSStrong teamwork, interpersonal skills and the ability to communicate with all management levels. Strong written and oral communication skills. Demonstrated ability to lead the work activity of others. Master of Science degree in Engineering (1) or Licensed Professional Engineer (2) (3) Industry expert who participtes or leads industry committee or working groups or has published technical documents. Benefits: BenefitsAnnual salary will vary based on a candidate’s skills, qualifications, experience, and other factors: $109,600.00/Yr. – $150,700.00/Yr. Annual Bonus for eligible positions: 15% 401(k) match and annual company contributionMedical, dental and vision insuranceLife and disability insuranceGenerous paid time off options, including vacation, sick time, floating and fixed holidays, maternity leave and bonding/primary caregiver leave or parental leave Employee Assistance Program and resources for mental and emotional supportWellbeing programs such as tuition reimbursement, adoption and surrogacy assistance and fitness reimbursementReferral bonus programAnd much moreNote: Exelon-sponsored compensation and benefit programs may vary or not apply based on length of service, job grade, job classification or represented status. Eligibility will be determined by the written plan or program documents.

ManTech seeks a Software Engineer to join our team in the Hanover, MD area. In this role, you will develop, maintain, and enhance complex and diverse software systems (e.g., processing-intensive analytics, novel algorithm development, manipulation of extremely large data sets, real-time systems, and business management information systems) based upon documented requirements.Responsibilities include, but are not limited to:Responsible for analyzing user requirements to derive software design and performance requirements while designing and coding new software or modifying existing software to add new features. Will integrate existing software into new or modified systems or operating environmentsResponsible for debugging existing software and correcting defects and will make recommendations for improving documentation and software development process standards.Will develop simple data queries for existing or proposed databases or data repositoriesMinimum Qualifications:Bachelor’s Degree in Computer Science or related discipline from an accredited college or university. 4 years of additional related experience may be substituted for a degree.0 years of related experience.Preferred Qualifications:Experience maintaining applications using industry-proven technologies (e.g., Java.NET and JavaScript)Experience maintaining the following:Data flow managementSolutions to monitor production systemsUser Interfaces (UIs) to display resultsAnalytic capabilitiesWays to automate JCSC mission workflowsSecurity Clearance Requirements:Current/Active TS/SCI with Polygraph required.Physical Requirements:Must be able to remain in a stationary position 50%.Constantly operates a computer and other office productivity machinery, such as a calculator, copy machine and computer printer.The person in this position frequently communicates with co-workers, management, and customers, which may involve delivering presentations.