FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Markem-Imaje is a trusted world manufacturer of product identification and traceability solutions, offering a full line of reliable and innovative inkjets, thermal transfer, laser, print and apply label systems. Markem-Imaje delivers fully integrated solutions that enable product quality and safety, regulatory and retailer compliance, better product recalls and improved manufacturing processes.Dover is a diversified global manufacturer with annual revenue of over $8 billion. We deliver innovative equipment and components, specialty systems, consumable supplies, software and digital solutions, and support services through five operating segments: Engineered Products, Fueling Solutions, Imaging & Identification, Pumps & Process Solutions and Refrigeration & Food Equipment.Headquartered in Downers Grove, Illinois, Dover trades on the New York Stock Exchange under "DOV." Additional information is available at dovercorporation.com.The Role:Working in a team-oriented workplace, Electrical Engineer IV will effectively apply electronic skills to perform activities concerned with analysis, design, testing/troubleshooting and manufacturing of products/systems including the application of these products/systems to commercial, industrial and scientific uses. As required by the business, works closely with other engineering disciplines in the development and application of products/systems or services.Job Responsibilities:• An excellent understanding of the Customer’s requirements, expectations, and application environment as it relates to product/system performance is required.• Execution of Customer requirements/expectations into product variations/enhancements or a new product idea is expected.• Collaboration and teamwork with other functional departments such as Reliability, Value Stream, Manufacturing Engineering, Test Engineering, GPS, Tech Service, Depot Centers, Sourcing, Business Centers, Product Management, etc., is required to ensure product/system performance objectives are met.• Timely resolution of product/system issues that affect MI’s internal and external Customers, which may involve engineering research, redesign, test & validation, documentation and communication is expected.• Responsible for all phases of product development including the specification, design, component selection, implementation, verification and validation of products and services. May provide technical leadership to a small group of assigned engineers and technicians.• Principle responsibility/ownership in the development of new electronic circuits or systems.• Proficient in the use of computer-assisted engineering and design software/equipment such as ECAD to perform assignments which include schematic capture and circuit simulation.• Recommend complex components, architectural systems and equipment based on analysis of specifications and reliability. May also review vendor capability and make recommendations to support product development.• Determine, plan and execute design approaches and parameters through the research, assimilation and application of new technology, utilizing creative problem-solving skills such as DOE/FMEA in order to develop new electrical analysis methods.• Remain current with a variety of the field's concepts, practices, and procedures.• Principle responsibility/ownership towards the continuous improvement efforts within the R&D community.• Perform, guide or lead complex electrical design functions associated with new product development. Comfortable working with and/or directing the mechanical, chemical, and electromechanical aspects of project.• Collaborate with and direct other engineers/peers in the acquisition, analysis and verification of electrical performance to specification through simulation and measurement. (E.g. power factors, electronic architecture timing, I/O, User Interface, communication ports, etc.).• Ensure successful completion of the assigned project/task within the budgeted time and cost constraints.• Participate in key account relationships involving requirements definitions, special applications/designs, and validation through field testing.• Work closely with local business/technical centers, sales and service representatives in order to generate revenue generation opportunities.• Identify new and/or works with existing suppliers and subcontractors on specifications, designs, schedules, etc. in the support of projects and production equipment. Coordinate key account relationships involving requirements definitions, special applications/designs, and validation through field testing.• Coordinate, lead and/or participate in design review meetings and associated activities.• Actively participates in the annual business planning sessions related to Electrical R&D.• Maintain laboratory notebooks in accordance with requirements of research/ design/development process.• Travel and/or interfacing with Customers, Business Centers is expected and encouraged.• Perform other related duties as assigned by management.Job Requirements:• Master’s Degree with a minimum of 8 years of experience in a related field or a Bachelor’s Degree with 10 years of experience.• On-going, advanced coursework in Electrical/Electronic Engineering required.• 10+ years of experience developing PCBAs.• Demonstrated ability to design and enter schematics (Altium a plus) and a superior knowledge and experience of digital, embedded CPU and analog circuits.• FPGA and/or C programming skills a plus.• The candidate should be able to develop their assignments will minimal direction as well as functional as part of a cross-functional and international product development team.• Mentoring and leadership of less experienced personnel in an agile environment.• Expertise in more than one of the following is required: system design, analog and digital circuit design, solid state power electronics and power conversion, microprocessor and digital signal processor, software, local area networks, wireless communications, data logging, and electromechanical devices.• Complex analog and digital design capability that includes expertise with low- and high-density integrated circuits, microprocessors/microcontrollers, motor controllers, display drivers, communication drivers, input/output devices, power supply circuits/conditioning, wiring diagrams and cable management. Experience with architectural design/manufacturing that includes VHDL, FPGA, CPLD, BGA and SMT.• Expertise with PCB design, testing, analysis and validation required.• Expertise with EMI/EMC design, testing techniques and Agency certification practices required.• Programming knowledge of C++ is preferred.• Proven track record of success for designing, implementing and manufacturing reliable product designs.• Expert use of test equipment/apparatus, computer-assisted engineering and design software, circuit board processes, etc.• Expertise with the use of ECAD for schematic capture and circuit simulation, oscilloscopes, DMM’s, logic/spectrum analyzers, signal generators and data logging equipment.• Expertise utilizing Design of Experiments (DOE) methodology is required.• Proficient knowledge of common software programs, including Word and Excel.• Strong leadership, Customer, interpersonal communication and mentoring skills a must.• Demonstrated aptitude in Engineering Excellence: FMEA, DFT, DFM, Root Cause Analysis, Design of Experiments, etc.The right candidate will be aligned to our values and culture: • Collaborative entrepreneurial spirit • Winning through customers • High ethical standards, openness and trust • Expectations for results • Respect and value peopleIf you believe you match our values and have the experience we’re looking for, apply! We can’t wait to hear from you!Work Arrangement: Onsite Salary Range: $150,000.00 - $170,000.00 We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.All qualified applicants will receive consideration for employment without discrimination based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.Attention Applicants: If you are an individual with a disability and require reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact for assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response.Job Function:

JOB DESCRIPTION: Lead Process Engineer Burlington, MA, USA Poly6, an emerging leader in aerospace and defense innovation, is enabling production of complex turbine engine designs by combining additive manufacturing, advanced computation and material science. Our technology is uniquely suited to increase the efficiency of complex manufacturing processes as well as advance engineering design capabilities. Long term benefits of Poly6’s products include reduced greenhouse gas emissions for the aviation sector. You will have the opportunity to work alongside a highly talented team to solve problems in one of the world’s most complex engineering sectors: aviation. JOB SUMMARY Reporting to the Plant Engineering Manager, the Lead Process Engineer - Additive Manufacturing will be primarily focused on the process control and technical execution of additive manufacturing processes within the manufacturing facility in Burlington, MA, and secondarily to assist with technology transfer to a scaled greenfield manufacturing facility in Ohio. This position requires a strong working knowledge of process control, manufacturing, materials science, with strong investigational and root cause analysis skills. Specific job-related responsibilities include: RESPONSIBILITIES Lead the control and optimization of manufacturing processes, focusing on stability, statistical process control (SPC), and effective change management during scale-up. Maintain and analyze process parameters, connecting process inputs to product outputs to optimize control limits and enhance overall product quality. Understand and optimize material interactions with manufacturing processes to improve product performance and reliability. Measure and control Key Process Variables (KPVs), diagnosing and monitoring out-of-control events to ensure stable and predictable operations. Contribute to cross-functional projects aimed at process control, scrap reduction, and continuous improvement. Support root cause analyses for process non-compliances and ensure timely corrective actions. Help maintain robust process documentation, identifying and implementing opportunities for workflow improvements. Provide hands-on technical assistance, including repairing, improving, installing, maintaining, and validating manufacturing equipment. Collaborate cross-functionally on continuous improvement initiatives related to equipment implementation, cost reduction, and productivity enhancements. Support product engineering efforts by providing process analysis, data reporting, and recommendations. Standardize preventative maintenance systems and documentation for manufacturing equipment, ensuring adequate training for seamless handoff to operational counterparts. Offer rapid-response daily production support, including personnel training, data/scrap analyses, troubleshooting process problems, and performing equipment maintenance. Support Design of Experiments (DOEs) and trial execution to validate process improvements and changes, including participation in PFMEA and JSA initiatives as needed. Participate in special projects as assigned by management. QUALIFICATIONS Bachelor’s degree in Engineering (or related field) with 2-4 years of relevant experience, or 4+ years of equivalent experience in a manufacturing environment. Demonstrated experience in controlled manufacturing environments focusing on process control, process improvement, and operational excellence. Proficiency in applying SPC and DOE methodologies for process analysis and improvement. Working knowledge of statistical analysis software (e.g., Minitab, JMP) and advanced Microsoft Excel skills. At least 1 year of practical experience applying Six Sigma principles in manufacturing, with documented project successes. Hands-on experience with manufacturing equipment, processes, and related software tools. PREFERRED EXPERIENCE Experience with polymer or similar material applications in industrial manufacturing. Strong skills with the Microsoft Office suite. Excellent verbal and written communication abilities, with a track record of working effectively across engineering and operations teams. Hands-on experience operating, maintaining, and optimizing production processes, including familiarity with CAD models and related tools. Understanding of processes, systems, and technical aspects of scaled manufacturing operations. A data-driven mindset focused on driving innovation and improving process capability and efficiency. Six Sigma Green Belt or equivalent certification. Experience with control plans and data collection systems for process monitoring and reporting. Involvement in new process development and scale-up activities. Understanding of material interactions within manufacturing processes and the ability to optimize for improved performance. This position requires access to information protected under U.S. export control laws, including the International Traffic in Arms Regulations and/or the Export Administration Regulations. Please note that any offer for employment may be conditioned on authorization to receive software or technology controlled under these U.S. export laws without sponsorship for an export license. Poly6 is an equal opportunity employer. We do not discriminate based on age, color, genetic information, religion, sex, veteran status, or national origin. This is a non-management positionThis is a full time position

Wollaston Alloys/CPP Boston is a stainless steel and high alloy sand casting foundry that has been based in Braintree, MA for over 60 years! We manufacture components for the defense market as well for commercial markets such as power generation industries. Wollaston Alloys/CPP Boston is a fast-paced company that has continued to grow over its long history! Wollaston Alloys/CPP Boston is seeking a driven individual to join our team as a Methoding Processing Engineer! The Methoding Processing Engineer is a crucial position within our facility. This is an excellent opportunity for to join a fast-paced company that has continued to grow over the past 60 years! CPP offers a competitive compensation and benefits package, which includes a bonus program, medical/dental/vision/life/disability insurance, 401K with match, paid vacation and holidays, paid training, and a great team culture!Essential Job Functions/Duties Communicate effectively with internal customers providing updates to progress against key milestones.Manage scrap reduction in the production operation.Design and simulate pattern rigging for new and existing product and create process techniques to produce and control the metallurgical and NDT integrity of the product.Develop and maintain operational sequences for part manufacture in conjunction with Administrative, Manufacturing, Quality, and NDT disciplines.Create and manage project timelines to move product through the shop, providing regular status updates to engineering and production management.Develop and manage BOMs and ensure accurate standard costs.Keep milestone updates and obtain agreements from internal customers.Troubleshooting in production processes related to Engineering.Create and maintain the documentation of work instructions and procedures for front end production processes.Work with shop floor personnel to provide an understanding of work instructions.Oversee NPI sampling process.Maintain engineering records of tooling, procedures, and customer drawings. QUALIFICATIONSRequired Qualifications: Education: Bachelor’s degree in engineering or related field requiredExperience: Required: 1+ years in a manufacturing setting. Plus: 2+ years in sand or investment casting foundry.Other Required Knowledge, Skills & Abilities: Attention to detail, ability to communicate at all levels of the organization, working knowledge of SolidWorks (or equivalent CAD software), MS Office Suite (Word, PowerPoint, Excel), ability to work with others through complex situations. CPP-Boston is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Boston, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. This is a full time position

Description Leidos offers its knowledge and expertise for publicly and privately-owned utilities, financial institutions and local governments; we are able toprovide our clients with business insight into all sectors of the infrastructure industry.We are seeking a Program Engineer with 9+ years of experience with a utility or an engineering consulting company servicing the power industry. The candidate must have a strong educational background in civil or electrical engineering design. Experience in managing projects, performing transmission engineering design, scheduling, and cross discipline collaboration is desired. This position will consist of coordinating project workloads, scheduling resources, attending project meetings, site walkdowns and collaborating with electrical design teams for transmission projects.Candidate will primarily function in a project management-based role that will be responsible for building project schedules, managing staff resource loaded schedules, and contributing to bids and proposal development. This role will also consist of taking a responsible leadership role in an evolving team. Their main focus will be placed on client projects, attending internal and client facing meetings, procuring necessary design inputs, overseeing workflow, and ensuring quality control is maintained and design packages are submitted on time. Site-visits to client ROW/facilities are expected to be part of the work, along with occasional travel for client meetings and industry related events.Experience in front-facing client operations such as preliminary engineering consultation, project setup, and kick-off meetings is preferred. Candidate must comply with quality control and safe work practices and maintain compliance with project scope, schedule and budget expectations. This position will be a senior member of a design team comprised of engineers, designers, and drafting technicians.QualificationsBachelors of Science (BS) degree in Civil or Electrical Engineering – Required.PE Licensure – Preferred.Experience with project management software such as Microsoft Project, Primavera P6, or Workfront is desired.Experience with Microsoft Suite of programs is required.Familiarity with transmission engineering design practices and quality control is required.Familiarity with PLS-CADD software is required.Familiarity with MFAD software is preferred.Familiarity with NESC and MA CMR 220 is required.Strong analytical and technical writing skills.Team player with ability to communicate with clients and staff.Willingness to travel, up to 25%.Location: Ideal candidate will be local to New England or PA. This position is REMOTE.No two career paths will ever look the same. AtLeidos,we know the most talented and diverse engineering professionals will always have a multitude of career choices; your time at Leidos will be a wise investment in your career and in yourself.Protect yourself and your family, with thebenefitsof working for a world-class employer. When you join Leidos,you join a Fortune 500 company and one of Ethisphere Institute’s “World's Most Ethical Companies”.PowerDeliveryPDSTLINEOriginal Posting:May 7, 2025For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $89,700.00 - $162,150.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Remote

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationRequired Skills:Minimum 8 years’ experience in various SAP integration tools and Technology5+ years of experience in SAP PI/PO and SAP Integration suite (SAP CPI/ SAP B2B / SAP API Management tool). 2+ years of experience with multiple SAP technologies (i. e. S/4HANA, Proxy, IDOC, Webservice call. Data Integration / Migration, Business Technology Platform)3+ years of software development experience in Java/Groovy/XSLTExperience with Integrating SaaS applications like Ariba CIG, SAP Callidus, SAP S/4HANA Cloud, SalesforceExperience in using various tools like Eclipse, PostmanExperience in maintaining all interface flows of each release. Maintain documentation of Infrastructure changes, technical guidelines, standardized approach, Integration governance process. Experience with full lifecycle implementation and complex integrations with SAP and non-SAP systems using CPI (Cloud Platform Integration). Analyzing business requirements and providing functional and technical design solutions for SAP integration projects. Configuring SAP PI/PO components like Integration Builder, Integration Directory, Runtime Workbench, etc. Integration expertise to implement interfaces between applications of different technical requirements via SAP PI/PO (Process Orchestration) and SAP CPI (Cloud Platform Integration)Good working knowledge of standard adapters such as FILE, RFC, IDOC, JDBC, SOAP, REST, SFTP, Proxy, BAPI, EDI, JMS etc. Experience with S/4 HANA is a plus. Experience with SAP BODS, SAP SLT is a plus. Working closely with the technical and functional teams to ensure the successful implementation of the SAP Integration projects. Experienced working on advanced, complex technical projects or business issues requiring state of the art technical or industry knowledge. Strong analytical ability, judgment, and problem analysis techniques. Solid troubleshooting skills, including tracing, logs, etc. Excellent verbal written and presentation skills with the ability to effectively interact with internal and external business partners. Ability to work with limited supervision.Key Responsibilities:Lead the integration architecture and roadmap for SAP and third-party systems (SAP ECC/S4HANA, SAP CAR, Ariba, Salesforce, etc.). Translate business and functional requirements into scalable integration solutions. Develop, manage, and maintainiFlows, APIs, and mappings. Apply security and authentication models such asOAuth2.0, SAML, X.509, Basic Auth, etc. Monitor integration flows and handle issue resolution, performance tuning, and proactive health checks. Design, develop, and maintain integrations usingSAP Integration Suitecomponents such as:Cloud Integration (CPI / CI)API ManagementEvent MeshIntegration Advisor- This is a hybrid role. Tuesday through Thursday are in-office days at BJ's Club Support Center in Marlborough, MA and Monday and Friday are remote days. In accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is starting from $98,000.00.

Join the team which delivers highly differentiated silicon into Blink and Ring battery powered devices. Our verification team works on state-of-the art SoCs in a vertically integrated team environment to deliver products our customers love. Our verification team is involved in early architectural and micro-architectural trade-offs to reduce time-to-revenue by shortening the DV cycle. Innovators will be delighted with our integrated verification/validation environment that is used to perform architectural modeling to post-silicon validation. The team works backwards from customer requirements to build super-low power, energy efficient designs that include the latest in AI, video processing, low power communications and CMOS fabrication technology. Key job responsibilities- Use and/or build bit accurate C models- Evaluate block and sub-systems for testability/verifiability - Write comprehensive block and system level testplans- Build assertions, traffic generators and scoreboards- Execute testplans and perform rigorous debugBASIC QUALIFICATIONS- Bachelor's degree in Electrical / Computer Engineering or related field- 5+ years experience in digital verification, preferably in image processor, SoC/Interfaces- 3+ years of experience in C/C++ and scripting (Python or TCL)- 5+ years experience in System Verilog or UVMPREFERRED QUALIFICATIONS- Master's or PH.D in Computer Engineering- 7+ years of experience in digital verificaiton, preferably in areas of image processing. - Familiarity with Matlab- Familiarity with formal verification techniques- Lab debug experience and/or FPGA debug- Strong written and verbal skillsAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Los Angeles County applicants: Job duties for this position include: work safely and cooperatively with other employees, supervisors, and staff; adhere to standards of excellence despite stressful conditions; communicate effectively and respectfully with employees, supervisors, and staff to ensure exceptional customer service; and follow all federal, state, and local laws and Company policies. Criminal history may have a direct, adverse, and negative relationship with some of the material job duties of this position. These include the duties and responsibilities listed above, as well as the abilities to adhere to company policies, exercise sound judgment, effectively manage stress and work safely and respectfully with others, exhibit trustworthiness and professionalism, and safeguard business operations and the Company’s reputation. Pursuant to the Los Angeles County Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $129,800/year in our lowest geographic market up to $212,800/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Job Description:Saab Inc., Autonomous and Undersea Systems division is seeking an innovative and experienced Senior Staff Systems Engineer to lead others on technical teams through capturing, decomposing, analyzing, deriving, allocating, implementing, and verifying product and systems design requirements for autonomous Unmanned Surface/Underwater Vehicles (aUSVs/aUUVs, AUVs) and Remotely Operated Vehicles (ROVs).Responsibilities include, but are not limited to:Decompose stakeholder needs and Concepts of Operation into system/sub-system level requirements. Perform functional analysis, derivation, and allocation to lower level system/sub-system elements. Experience with Model Based System Engineering (MBSE) is a plus.Apply fundamentals and best practices of system engineering to create innovative solutions and solve challenging problems. Experience with Design for Manufacturability a plus.Develop and execute system/sub-system integration and test activities; maintain Requirement Verification Test Matrix (RVTM) with System Integration and Test Engineering.Conduct data modeling and analysis as needed; experience with control system modeling, analysis, and design is a plusConduct alternatives analyses and propose solutions in support of stakeholder change requests.Present and discuss technical concepts, tradeoffs, analyses, designs, and performance estimates.Interface with other disciplines to develop/define/implement customer requirements.Follow through on full product lifecycle: development, prototyping, integration, verification, delivery, and support as required including operations and sea-testing.Participate in technical reviews and status meetings.Collaborate and communicate with internal and external stakeholders.Follow company standard operating procedures and Quality System requirements.Plan, organize, and estimate required effort for responsible tasks, including possibly writing Basis of Estimates (BOEs).Work within a team environment to achieve goals.Support mentoring and engineering staff development.Compensation Range: $154,600 - $200,900The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training.Skills and Experience:Required Skills and Experience:Bachelor's degree in Engineering, Physics, Mathematics or related discipline, Master’s degree is a plus.8+ years of relevant experience in advanced system design with broad application and a fundamental understanding of the product development life cycle.Ability to develop system architectures and configurations meeting or exceeding customer needs.Ability to specify interfaces including physical/mechanical and electrical characteristics, and communication protocols.Fundamental understanding of industry accepted design methods and practices, including design spaces/tradeoffs, test data analysis, and requirement/specification change processes.Significant product development background demonstrating a strong engineering aptitude and good problem-solving skills.Demonstrated ability to resolve issues during design, development and execution of system engineering activities.Experience with CORE/Doors/Other requirements management tools, MatLab/MathCad/Ansys/Other analysis packages, MSOffice including (Excel, Word, Visio, PowerPoint, Outlook, etc.) to create drawings, documents, work products, and presentations. Experience with Cameo, MagicDraw, MSProject, SolidWorks, AutoCad, Creo, are pluses.Familiarity with standard data collection, test, environmental (thermal, shock, vibe) and integration equipment, facilities, and test techniques.Ability and willingness to support all phases of programs from concept development through final acceptance is required; this will often include on-site support for customer meetings, support equipment installation, configuration, integration, optimization, delivery and acceptance testing.Strong written and verbal interpersonal and communication skills.Proven contributor on project teams to accomplish objectives.Proven contributor on project teams to accomplish objectives.Effective contributor in a team environment, providing technical leadership where applicable.Ability to work independently to achieve technical and program requirements.Ability to work with other engineering disciplines to contribute to a collaborative development environment.Must hold or be able to obtain U.S. DoD SECRET security clearance.Ability to travel up to 25%, both international and domestic.Desired Skills and Experience:Prior experience with DoD or with U.S. government customers is highly desirable.Experience developing products/solutions for Naval and Marine applications.Familiarity with Military Standards, ruggedized equipment design, and environmental test requirements.Knowledge of materials and corrosion control.Extensive familiarity with the design and development of autonomous surface and underwater systems.Citizenship Requirements:Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen.Benefits:Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits:Medical, vision and dental insurance for employees and dependentsPaid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability401(k) with immediate vesting on employer matchTuition assistanceStudent loan assistanceWellness account, Care.com subscription and employee assistance programsEmployee stock purchase program with employer matchAbout Us:Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations.Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

What you will doJohnson Controls is seeking an Equipment Systems Application Engineer to support the construction sales team by assisting with pre and post sales activities on building systems and equipment project opportunities. Although the role is primarily weighted with execution of our equipment business, the ratio of pre and/or post sales activities will vary based on assigned branch type, assigned Account Execs and customer expectations.Pre-sales activities include system configuration validation, HVAC equipment and/or controls selection for basis of design as well as bidding, application and pricing. This role will receive direction, coaching and support from assigned account executives and sales leadership on pre-sale needs and expectations.Post sales activities include equipment project execution that is profitable, accurate, on-time, within the scope of the contract and in alignment with customer expectations. Develops and provides detailed engineering information and submittals to communicate design, configuration, operating and installation requirements to customers, consultants, Johnson Controls service and necessary subcontractors. Works with assigned sales team to maintain an effective balance between customer satisfaction and project financial results when performing pre-sale and/or post sale duties. This position is based in Manchester, New Hampshire, and is hybrid.How you will do itProvides technical support, selections and limited estimating support to Account Execs during project design or proposal phase.Assists as needed in developing the customer business case for the conceptual solution.Supports detailed estimating of projects for Account Execs to finalize and present to clients.Validates assumptions made during proposal and development phase. Builds a detailed cost estimate and scope of work for assigned projects in conjunction with Sales.Assists in preparing proposals and other customer communication documents.Prepares customer proposals and quote letters for assigned projects. Includes project takeoffs, specification review, special quote generation and RFQ and RFI issuanceSupports Account Execs’ efforts to become basis of design through timely selections, specifications, sequences, drawings and review of documents as required.Manages project Profit and Loss (P&L) and customer satisfaction for all projects assigned. Accomplishes this utilizing the Johnson Controls equipment order execution process, including; execution of the equipment orders, startup and final payment.Works closely with branch administration to manage backlog execution, schedule and forecast execution of equipment projects up to two years in advance.Interprets engineering drawings and specifications in order to develop and provide engineered equipment submittals in compliance with; contract drawing, site coordination, and site installation requirements.Follows standardized submittal generation guidelines for preparation and processing of equipment engineering submittals, including but not limited to; final coil selection, coil hand coordination, fan selection, chiller performance verification, chiller configuration and option selection so as to match schedule, drawing and specification requirements.Verifies that Johnson Controls has an “approved” equipment submittal and positive configuration acceptance by the installing contractor prior to releasing equipment for fabrication.Evaluates the contractual scope of supply and the impact of client-issued bulletins, field directives and/or scheduling changes. Coordinates project schedule with the customer to ensure timely release of equipment.Works to maximize appropriate additional change orders. Performs associated cost estimates, prepares proposals and works with sales in negotiating final settlement price and customer acceptance resulting from scope of supply changes change orders.Coordinates the factory equipment order process to ensure technical and commercial compliance with contract documents and site coordination requirements.Generates technical content of Purchase Orders for field purchased materials and equipment.Selects, orders, and tracks the delivery of materials and equipment for assigned projects. Coordinates shipping processes to meet factory and project schedule requirements and reviews the equipment order status reports as needed, identifying any critical delivery requirements. Coordinates equipment delivery requirements with the Customer.Effectively communicates project progress, issues and financial status to management as required.Reviews vendor invoices for technical and commercial compliance prior to approving payment.Coordinates post shipment services that include but are not limited to; start-up initiation and solutions to delivery, shipping or scope omission problems.Visits customer sites to ensure delivery and receipt of critical equipment is in compliance with the expectations of Johnson Controls, the customer and the owner.Ensures project documentation is compliant with contract requirements, Johnson Controls standards and the formal Johnson Controls equipment order execution process.Periodically answers engineered equipment and controls application questions from potential customers and other sales channels.Develops and maintains viable long-term relationships with customers, consultants, prime contractors and subcontractors. Attends job progress meetings as required.Coordinates customer-training requirements with local Johnson Controls service.Works with Customer Operations Associate to address any billing and collections issues, and to assure Johnson Controls receives payment in full.What we look forRequired Bachelor’s degree in EngineeringComputer skills experience to include: Microsoft Office suite, (with emphasis on Word, Excel and Visio) Adobe Writer, and basic Windows operating system environment.Ability to work independently and as part of a team. Strong organizational skills with attention to detail. Interpersonal skills to effectively communicate with both internal and external customers. Demonstrated ability to simultaneously manage a large and diverse number of projects with professionalism, cooperation, and persistence.US citizen and/or Permanent Resident of the US. This role does not offer sponsorship.PreferredAutoCad

Who we areWith its A.I.-powered robotic technology platform, Symbotic is changing the way consumer goods move through the supply chain. Intelligent software orchestrates advanced robots in a high-density, end-to-end system – reinventing warehouse automation for increased efficiency, speed and flexibility.What we need We are looking for a Senior Software Engineer on who will play a hands-on role in the development of a suite of applications, both mobile and desktop for our next generation of software which controls fleets of mobile robots and industrial systems. The qualified candidate will play a hands-on role in helping to bring our robotics solutions to our customers. We are looking for people who thrive in a creative, collaborative, and agile development environment. What We DoWe are a talented team of roboticists and software engineers working on the latest Symbotic automation expansion. We are responsible for delivering solutions for the ordering, processing and delivery of mixed SKU totes to hundreds of customers.What you'll do Design and develop real-time distributed software for Automation systems. Design software systems which are highly available & widely scalable. Research, develop, and productize solutions for NP-Hard optimization problems using combinatorial optimization. Demonstrate passion about building high quality software, love solving problems and facing new challenges. Analyze a system of distributed software components using performance, profiling, and debugging tools. Be a proactive communicator who enjoys working closely with creative and technical peers. Work in a dynamic Agile/Scrum based environment. Have opportunities to travel to customer sites. Develop software application using microservice oriented architecture using technologies like .Net Core, Rabbit MQ, Open API and KubernetesWhat you'll need Degree in a Computer Science or other related discipline required. Minimum 5 years professional experience developing software in C#. Experience on SQL server (PL/SQL).Hands-on problem solver with excellent software design and implementation skills. Experience with Windows and Linux development. Experience with developing unit tests and test automation frameworks. Experience with source control software. Should be comfortable with asynchronous or multithread programming. Experience with cross platform .NET core development. This person must be able to work in a fast-paced environment and support unscheduled events. This person must be a self-starter and highly motivated. Experience understanding and developing new algorithms (NP-Hart/Dynamic Programming and others). Experience with Redis in memory data store is a plus Experience with Mongo DB is a plusOur EnvironmentUp to 10% of travel may be required. Employees must have a valid driver’s license and the ability to drive and/or fly to client and other customer locations.The employee is responsible for owning a credit card and managing expenses personally to be reimbursed on a bi-weekly basis.#LI-Hybrid#LI-JT1About SymboticSymbotic is an automation technology leader reimagining the supply chain with its end-to-end, AI-powered robotic and software platform. Symbotic reinvents the warehouse as a strategic asset for the world’s largest retail, wholesale, and food & beverage companies. Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. As the backbone of commerce the Symbotic platform transforms the flow of goods and the economics of supply chain for its customers. For more information, visitwww.symbotic.com.We are a community of innovators, collaborators and pioneers who embrace our differences, because we know unique perspectives make us stronger and smarter. Every perspective matters. We depend on the collective voices of our employees, customers and community to help guide us as we build a better place to work – for you and the world. That’s why we’re proud to be an equal opportunity employer.We do not discriminate based on race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, or genetic information.

Wollaston Alloys/CPP Boston is a stainless steel and high alloy sand casting foundry that has been based in Braintree, MA for over 60 years! We manufacture components for the defense market as well for commercial markets such as power generation industries. Wollaston Alloys/CPP Boston is a fast-paced company that has continued to grow over its long history! Wollaston Alloys/CPP Boston is seeking a driven individual to join our team as a QualityEngineer! The Quality Engineer is a crucial position within our facility. This is an excellent opportunity for to join a fast-paced company that has continued to grow over the past 60 years! CPP offers a competitive compensation and benefits package, which includes a bonus program, medical/dental/vision/life/disability insurance, 401K with match, paid vacation and holidays, paid training, and a great team culture! Major Responsibilities Coordinate with our customer’s Engineering, Quality, and Purchasing representatives, suppliers, and all departments and levels of CPP workforce providing, on a tactical level the technical support and the direction necessary to ensure compliance with the intent of customer quality expectations.Build an atmosphere of competence, cooperation and trust with customer representatives via Supplier Product, Systems and Qualification Surveys.Take active participation in our Continuous Improvement efforts, promote quality excellence, and encourage teamwork among ourselves and our customers.Be proactive, innovative, and creative using judgment and decision making in the implementation of necessary quality programs. Qualifications Bachelor’s degree from four-year college or university in Engineering or a related field; or one to two years related experience and/or training; or equivalent combination of education and experience.Must have a comprehensive knowledge of quality and quality systems, such as AS9100 orNADCAP.3 - 5 years of work experience in an foundry or related fieldFamiliarity with the investment casting industry and related processes is desirableStrong communication skills, good PC skills, program management skillsKnowledge of Six Sigma and Lean Manufacturing a plusAble to work independently with minimal directions Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This is a non-management positionThis is a full time position

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Description Leidos offers its knowledge and expertise for publicly and privately-owned utilities, financial institutions and local governments; we are able toprovide our clients with business insight into all sectors of the infrastructure industry.We are seeking a Program Engineer with 5+ years of experience with a utility or an engineering consulting company servicing the power industry. The candidate must have a strong educational background in civil or electrical engineering design. Experience in managing projects, performing transmission engineering design, scheduling, and cross discipline collaboration is desired. This position will consist of coordinating project workloads, scheduling resources, attending project meetings, site walkdowns and collaborating with electrical design teams for transmission projects.Candidate will primarily function in a project management-based role that will be responsible for building project schedules, managing staff resource loaded schedules, and contributing to bids and proposal development. This role will also consist of taking a responsible leadership role in an evolving team. Their main focus will be placed on client projects, attending internal and client facing meetings, procuring necessary design inputs, overseeing workflow, and ensuring quality control is maintained and design packages are submitted on time. Site-visits to client ROW/facilities are expected to be part of the work, along with occasional travel for client meetings and industry related events.Experience in front-facing client operations such as preliminary engineering consultation, project setup, and kick-off meetings is preferred. Candidate must comply with quality control and safe work practices and maintain compliance with project scope, schedule and budget expectations. This position will be a senior member of a design team comprised of engineers, designers, and drafting technicians.QualificationsBachelors of Science (BS) degree in Civil or Electrical Engineering – Required.PE Licensure – Preferred.Experience with project management software such as Microsoft Project, Primavera P6, or Workfront is desired.Experience with Microsoft Suite of programs is required.Familiarity with transmission engineering design practices and quality control is required.Familiarity with PLS-CADD software is required.Familiarity with MFAD software is preferred.Familiarity with NESC and MA CMR 220 is required.Strong analytical and technical writing skills.Team player with ability to communicate with clients and staff.Willingness to travel, up to 25%.Location: Ideal candidate will be local to New England. This position is REMOTE.No two career paths will ever look the same. AtLeidos,we know the most talented and diverse engineering professionals will always have a multitude of career choices; your time at Leidos will be a wise investment in your career and in yourself.Protect yourself and your family, with thebenefitsof working for a world-class employer. When you join Leidos,you join a Fortune 500 company and one of Ethisphere Institute’s “World's Most Ethical Companies”.PowerDeliveryPDSTLINEOriginal Posting:March 25, 2025For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $72,150.00 - $130,425.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Remote#Featuredjob

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationLead AWS Cloud EngineerWe are seeking a highly skilled Lead Cloud Engineer for our Cloud Operations and Engineering team. The successful candidate will be responsible for designing, building, deploying, and supporting highly available systems and solutions on AWS. The ideal candidate will possess deep expertise in AWS services and hybrid cloud architecture, providing leadership and mentorship to the team members. This role includes designing, implementing, and managing scalable and reliable cloud solutions, and partnering with cross-functional teams to power innovation and growth. Key Responsibilities:Lead cloud initiatives across multiple projects and business units, ensuring scalable and secure architecture. Operate in an Agile environment with DevSecOps mindset, utilizing infrastructure as code and related tools. Mentor junior team members. Provide leadership for infrastructure projects. Design and implement resilient cloud systems, including DR/HA strategies and operational support plans. Use CI/CD tools for infrastructure as code – Bamboo, Bitbucket, Jenkins, Git, Nexus, AWS Code Build, CodeDeploy, CodePipeline. Build systems with AWS services (EC2, S3, RDS) and cloud databases. Ensure availability, configuration, and compliance with AWS management tools like CloudFormation, Autoscaling, CloudWatch, Systems Manager, Config, CloudTrail, Puppet PE. Monitor performance against operational metrics. Manage security and identity with AWS IAM, KMS, Certificate Manager, Secrets Manager. Support AWS analytics solutions in production – AWS EMR, Data Pipeline, RedShift. Handle storage and backup in hybrid cloud environments. Participate in on-call rotation for 24/7 support of production environments. Required Skills and Experience:Bachelor of Science in Technology or equivalent with 7+ years of experience in provisioning and managing infrastructure and Infrastructure as Code. 3+ years of expert level experience across a broad range of AWS services. Familiarity with on-premises setup and hybrid cloud architecture. Hands-on experience in designing and deploying infrastructure using CloudFormation, Terraform, or other IaC tools. Extensive experience with auto-scaling and self-healing within well-architected designs. Proficiency in AWS monitoring: including CloudWatch, CloudTrail, S3 access logs, ALB logs, and AWS Config for managing a holistic portfolio of applications across multiple accounts. Security & IAM: Expertise in creating and managing IAM roles and security control policies. S3: Skilled in creating buckets, policies, lifecycle management, and logging. Proficient in Python and administration of Node and Java-based applications. Expertise in AWS CLI. Preferred Qualifications:AWS certifications such as AWS Certified Solutions Architect (Professional) or AWS Certified DevOps Engineer or AWS Certified Advanced NetworkExperience with blue-green deployments, canary releases, and other deployment strategies. Familiarity with serverless technologies such as AWS Lambda and API Gateway. Soft Skills:Excellent communication and collaboration skills with both technical and non-technical teams. Ability to lead people and technical discussions and guide decision-making processes. Strong problem-solving abilities and a proactive mindset. If you're passionate about cloud engineering and excited to take on challenging projects in a dynamic environment, we'd love to hear from you! This is a hybrid role. Tuesday through Thursday are in-office days at BJ's Club Support Center in Marlborough, MA and Monday and Friday are remote days. In accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is starting from $125,500.00.

AI for Domains (AIDO) team is part of Alexa Conversational Assistant Services organization where our mission is to create a best-in-class Conversational AI that is intuitive, intelligent, and responsive, by developing superior Large Language Models (LLM) solutions and services which increase the capabilities built into the model and which enable utilizing thousands of APIs and external knowledge sources to provide the best experience for each request across millions of customers and endpoints. We are looking for talented and experienced science leader in the field of LLM, Artificial Intelligence (AI), Natural Language Processing (NLP) and/or Information Retrieval, to invent and build scalable solutions for a state-of-the-art context-aware conversational AI. A successful candidate will have solid technical background and extensive experience in leading projects and technical teams. The ideal candidate would also have experiences in developing natural language processing systems (particularly LLM based systems) for industry applications, enjoy operating in highly dynamic and ambiguous environments, be self-motivated to take on challenging problems to deliver customer impact.Key job responsibilitiesAs a Senior Applied Scientist, you will: * Help develop a strong and coherent team with particular focus on sciences and innovations in LLM technologies for conversation AI applications* Serve as a technical lead on demanding and cross-team projects, and effectively collaborating with multiple cross-organizational teams* Apply technical influence on partner teams, increasing their productivity by sharing your deep knowledgeBASIC QUALIFICATIONS- PhD, or Master's degree and 6+ years of applied research experience- 3+ years of building machine learning models for business application experience- Experience programming in Java, C++, Python or related language- Graduate degree (MS or PhD) in Computer Science, Electrical Engineering, Mathematics, or a related field.- Solid ML background and familiar with standard NLU, NLG, and LLM techniquesPREFERRED QUALIFICATIONS- PhD in Computer Sciences, Electrical Engineering, or Mathematics with specialization in machine learning, deep learning, or natural language processing- 4+ years experience in building conversational AI and/or natural language processing systems.- Publications at peer-reviewed NLP/ML conferences (e.g. ACL, EMNLP, NAACL, NeurIPS, ICLR, ICML, AAAI, etc.)- Scientific thinking and the ability to invent, a track record of thought leadership and contributions that have advanced the field.- 5+ years experience with large scale distributed systems such as Hadoop, Spark etc.- Excellent written and spoken communication skillsAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $150,400/year in our lowest geographic market up to $260,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

Who we areWith its A.I.-powered robotic technology platform, Symbotic is changing the way consumer goods move through the supply chain. Intelligent software orchestrates advanced robots in a high-density, end-to-end system – reinventing warehouse automation for increased efficiency, speed and flexibility.What we needWe are seeking a highly skilled Senior Robotics Engineer specializing in Robot Perception to join our dynamic team. In this role, you will play a pivotal part in developing advanced perception systems for our automated warehouse solutions, and work on topics such as object detection and pose estimation, sensor calibration and fusion, tight integration with robot planning and manipulation, and creating comprehensive datasets from millions of cases handled daily. Additionally, you will work on improving our simulation environments to bridge the gap between simulation and real-world performance using state-of-the-art techniques. Your exceptional software engineering skills will drive the advancement of our robotic perception capabilities, ensuring accuracy, efficiency, and scalability in our automated warehouse solutions.What we doThe Vision and Robotics team is dedicated to developing, deploying, and maintaining advanced vision and robotics solutions for our warehouse automation systems. By leveraging our inbound and outbound adapter cellswhich connect the storage structure and handle tasks such as depalletizing, singulating cases, and palletizing shipmentswe ensure efficient processing and seamless integration with our autonomous robots (Symbots) and AI-powered software. The adapter cells hand over cases to the Symbots, who then place the cases into the storage structure and retrieve them when needed for palletization. Our proven track record in industrial vision and robotics system development, combined with best engineering practices, allows us to continuously push the limits of warehouse automation technology.What you'll doDevelop Advanced Perception Systems: Design and implement architectures that integrate state-of-the-art computer vision and deep learning techniques.Maintain Software Engineering Excellence: Develop and sustain robust, high-quality software while adhering to best practices including thorough code reviews, testing, and documentation.Collaborate with Planning Teams: Work closely with robot planning and manipulation groups to embed perception data into control pipelines.Optimize Decision-Making Workflows: Design and refine processes that enable real-time robotic actions based on integrated perception data.Create and Curate Datasets: Build comprehensive datasets from millions of daily cases, incorporating data augmentation, precise automated labeling, and rigorous quality assurance.Enhance Simulation Environments: Leverage synthetic data generation and advanced simulation techniques (e.g., Gaussian Splatting, NeRFs, GenAI) to bridge the sim-to-real gap.Drive Research and Innovation: Stay current with advancements in robotics perception, proposing and implementing innovative solutions to enhance system capabilities.Foster Collaboration and Mentorship: Engage with cross-functional teams and mentor junior engineers to promote a culture of continuous learning and improvement.What you’ll needEducation: Bachelor's or Master's degree (Ph.D. is a plus) in Robotics, Computer Science, Electrical Engineering, or a related field. A publication record in top-tier computer vision and machine learning conferences (e.g., CVPR, ICCV, NeurIPS, CoRL, ICML, ICLR) and journals is a plus.Experience:Minimum 5 years of work experience in robotics engineering and robotic perception software development experienceTechnical Proficiency: Expertise in a modern programming language (C++, C#, and/or Python), coupled with a strong grasp of computer vision methodologies such as semantic/instance segmentation, object detection, tracking, pose estimation, SLAM, 3D mapping, sensor calibration, sensor fusion techniquesAdvanced & Deep Learning Techniques: Familiarity with state-of-the-art perception methods (NeRFs, Gaussian Splatting, LLMs, Diffusion Processes) combined with proficiency in deep learning frameworks like PyTorch or JAX.Data Engineering: Experience in building and managing large-scale datasets, developing data pipelines, and implementing innovative, scalable solutions.System Integration: Proven ability to integrate perception systems with planning and manipulation stacks to create robust, scalable end-to-end automation solutions.Problem-Solving: Exceptional analytical and troubleshooting skills for addressing complex engineering challenges.Collaboration: Strong teamwork and communication skills for effective collaboration in multidisciplinary environments.Our Environment Up to 10% travel may be required. Employees must have a valid driver’s license and the ability to drive and/or fly to client and other customer locations. The employee is responsible for owning a credit card and managing expenses personally to be reimbursed on a bi-weekly basis. #LI-JT1#LI-HybridAbout SymboticSymbotic is an automation technology leader reimagining the supply chain with its end-to-end, AI-powered robotic and software platform. Symbotic reinvents the warehouse as a strategic asset for the world’s largest retail, wholesale, and food & beverage companies. Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. As the backbone of commerce the Symbotic platform transforms the flow of goods and the economics of supply chain for its customers. For more information, visitwww.symbotic.com.We are a community of innovators, collaborators and pioneers who embrace our differences, because we know unique perspectives make us stronger and smarter. Every perspective matters. We depend on the collective voices of our employees, customers and community to help guide us as we build a better place to work – for you and the world. That’s why we’re proud to be an equal opportunity employer.We do not discriminate based on race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, or genetic information.

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationWho You Are:You are a seasoned engineering leader and domain architect with deep expertise in retail merchandising technology. With extensive experience in designing robust architectures and leading engineering teams, you are well-versed in merchandising systems, inventory management, pricing strategies, and category management. You have a track record of integrating cutting-edge solutions that align with business objectives, optimize processes, and improve decision-making through data-driven insights.Job Summary:As the Retail Engineering Manager - MerchTech Products, you will shape the technological vision for BJ’s retail merchandising function. Your role involves designing scalable systems, overseeing the implementation of merchandising platforms, and ensuring alignment between business needs and technology capabilities. You will collaborate with business leaders, IT teams, and vendors to build and maintain high-performing merchandising solutions.Key Responsibilities:Leadership and Management:Lead the merchandising engineering team, providing technical direction, mentorship, and fostering a culture of innovation.Develop and execute strategic technology plans aligned with retail merchandising and product goals.Collaborate with cross-functional teams, including ERP, Finance, IT, Data Analytics, and Supply Chain, to enhance business capabilities through technology.Retail Merchandising Systems & Architecture:Design and oversee the development of merchandising solutions, including category management, pricing optimization, assortment planning, and inventory control systems.Define system architecture, integration frameworks, and data models that support scalable and resilient merchandising applications.Partner with vendors to evaluate and implement third-party merchandising tools, ensuring seamless integration with BJ’s existing retail ecosystem.Data-Driven Decision Making:Develop advanced analytics and AI-driven solutions to enhance Category Management, Promotion management, demand forecasting, pricing strategies, Master data managementImplement data governance and quality best practices to ensure accurate and actionable insights from merchandising data.Technology Leadership & Innovation:Stay updated with emerging technologies in retail merchandising, AI, and automation to drive continuous improvements. Drive innovation by leveraging cloud platforms, microservices architecture, and API-driven integrations to modernize merchandising applications.Optimize system performance, reliability, and security in line with industry best practices.Compliance & Best Practices:Ensure compliance with retail industry standards, data privacy regulations, and security best practices.Develop and maintain documentation, including system design, standard operating procedures, and training materials.Job Qualifications:Bachelor's or Master's degree in Computer Science, Information Technology, Business, or a related field.7+ years of experience in IT architecture, retail merchandising systems, or enterprise solution developmentProven experience in leading engineering teams and delivering complex technology solutions within a retail environment.Have prior experience with one or more solution provider like Blueyonder, Oracle, SAP, Relex, O9Strong understanding of merchandising solutions, category and space management, inventory planning, pricing and promotion engines, and vendor management systems.Proficiency in cloud-based platforms (AWS, Azure, GCP), API integrations, and microservices architecture.Hands-on experience with retail analytics, AI-driven forecasting tools, and machine learning applications for merchandising.Knowledge of ERP and POS integrations within retail ecosystems.Ability to translate business objectives into technology roadmaps and actionable implementation plans.Strong analytical and problem-solving skills, with a focus on driving efficiency and business growth.Excellent communication skills to effectively collaborate with stakeholders and influence decision-making.Leadership Competencies:- Enterprise Mindset: Ability to align technology strategies with overall business objectives.Strategic Planning: Skilled at defining long-term architecture while driving quick wins for immediate business impact.Proactive Problem-Solving: Takes initiative in identifying challenges and proposing innovative solutions.Change Management: Experience in leading digital transformation initiatives within a retail organization.This is a hybrid role. Tuesday through Thursday are in-office days at BJ's Club Support Center in Marlborough, MA and Monday and Friday are remote days. In accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is starting from $125,500.00.

Join the team which delivers highly differentiated silicon into Blink and Ring battery powered devices. Our verification team works on state-of-the art SoCs in a vertically integrated team environment to deliver products our customers love. Our verification team is involved in early architectural and micro-architectural trade-offs to reduce time-to-revenue by shortening the DV cycle. Innovators will be delighted with our integrated verification/validation environment that is used to perform architectural modeling to post-silicon validation. The team works backwards from customer requirements to build super-low power, energy efficient designs that include the latest in AI, video processing, low power communications and CMOS fabrication technology. Key job responsibilities- Use and/or build bit accurate C models- Evaluate block and sub-systems for testability/verifiability - Write comprehensive block and system level testplans- Build assertions, traffic generators and scoreboards- Execute testplans and perform rigorous debugBASIC QUALIFICATIONS- Bachelor's degree in Electrical / Computer Engineering or related field- 6+ years experience in digital verification, preferably in image processor, SoC/Interfaces- 3+ years of experience in C/C++ and scripting (Python or TCL)- 6+ years experience in System Verilog or UVMPREFERRED QUALIFICATIONS- Master's or PH.D in Computer Engineering- 8+ years of experience in digital verification, preferably in areas of image processing. - Familiarity with formal verification techniques- Lab debug experience and/or FPGA debug- Strong written and verbal skillsAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Los Angeles County applicants: Job duties for this position include: work safely and cooperatively with other employees, supervisors, and staff; adhere to standards of excellence despite stressful conditions; communicate effectively and respectfully with employees, supervisors, and staff to ensure exceptional customer service; and follow all federal, state, and local laws and Company policies. Criminal history may have a direct, adverse, and negative relationship with some of the material job duties of this position. These include the duties and responsibilities listed above, as well as the abilities to adhere to company policies, exercise sound judgment, effectively manage stress and work safely and respectfully with others, exhibit trustworthiness and professionalism, and safeguard business operations and the Company’s reputation. Pursuant to the Los Angeles County Fair Chance Ordinance, we will consider for employment qualified applicants with arrest and conviction records.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $129,800/year in our lowest geographic market up to $212,800/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit https://www.aboutamazon.com/workplace/employee-benefits. This position will remain posted until filled. Applicants should apply via our internal or external career site.

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday

Description Leidos offers its knowledge and expertise over a wide area of cutting-edge energy technologies and independent oversight, combined with proven business acumen. Building our work for publicly and privately owned utilities, financial institutions and local governments, we are able to provide our clients with business insight into all sectors of the infrastructure industry.We are seeking a Transmission Planning Engineering Manager who will lead dynamic team within our Energy & Systems Solutions, and who will provide transmission planning consulting services as both a lead engineer and as a project manager as client needs dictate. This position will contribute to the expansion of Leidos Engineering and the existing Transmission Planning consulting practice.It is expected that this role will involve the management of complex transmission planning studies both independently and also serve as a mentor: guiding junior staff who are assigned to perform similar studies. Studies are conducted for Municipal Utilities, Investor Owned Utilities, and Regional Planning organizations such as ISO’s and RTO’s, as well as providing transmission consulting services for Developer and Independent Power Producer Clients.Transmission Planning Engineering Manager responsibilities:• Build and maintain client relationships, assist with expanding the current client base and contribute to the growth and expansion of Transmission Planning consulting servicesPerform supervisor duties for a team of 3-5 engineersProvide work directions and assist with QA/QC review of the engineering work of the teamSales and business development activities will be expectedThe candidate should possess solid understanding of power system analysis concepts, including transmission system planning and familiarity with NERC reliability standardsExperience with common industry accepted analytical tools such as PSS/E, PSLF, PowerGEM TARA, DSA Tools TSAT, ASPEN, CAPE, EMTP and PSCAD are highly desirableThe candidate must be experienced and capable of functioning both as a team member and in a leadership role in transmission studiesContribute to technical writing of project proposals and responses to industry RFIs and RFPsParticipate and present in industry forums and conferences as the opportunity arisesWork closely with business development manager(s) on the assessment of new opportunities and contribute to the business developmentQualifications:Bachelor of Science degree and 12+ years of prior relevant experience or Masters with 10+ years of prior relevant experienceMust be experienced in transmission analytics, e.g., load flow studies, stability studies, protection and short circuit studies, etc., and be knowledgeable of various power system theories and limitationsGraduate engineer with a B.S. Electrical, engineering required and a minimum of 10 years of directly related experienceUnderstanding of transmission policy and regulatory issues is considered a plus, including experience with FERC Open Access Transmission Tariff, NERC reliability standards, Generator Interconnection Procedures (LGIP and SGIP) and associated study practicesProfessional Engineering license preferredDemonstrates excellent oral and written communications skillsRemarkable problem solver in both team and independent environmentsWillingness to travel to project and/or client sitesPDSPMOriginal Posting:April 4, 2025For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $126,100.00 - $227,950.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Remote#Featuredjob

Who we areWith its A.I.-powered robotic technology platform, Symbotic is changing the way consumer goods move through the supply chain. Intelligent software orchestrates advanced robots in a high-density, end-to-end system – reinventing warehouse automation for increased efficiency, speed and flexibility.What we needWe are looking for aSenior Software Engineer with strong background in C# Development and PL/SQL to design, develop, and maintain high-quality software applications. The role involves developing Java based applications and solid experience with PL/SQL for database management and integration. This role involves working closely with cross-functional teams to deliver robust solutions and enhance our software applications. We are looking for people who thrive in a creative, collaborative, and agile development environment.The ideal candidate will have experience in multiple data access techniques including ORM access (example Entity Framework) and stored procedures. The candidate should be comfortable writing queries and stored procedures. Designing and testing for performance is a critical responsibility for the team.What We DoWe are a talented team of roboticists and software engineers working on the latest Symbotic automation expansion. We are responsible for delivering solutions for the ordering, processing and delivery of mixed SKU totes to hundreds of customers.What you'll do:Work with developers from multiple teams to design schema and data access pattern for new business requirementsDevelop highly performant data access software and SQL procedures used by teams throughout the software department (C#, Entity Framework, LINQ, MSSQL)Collect and analyze data to evaluate and tune the performance of data access software. Report on metrics that can identify problems early.Develop software application using microservice oriented architecture using technologies like .Net Core, Rabbit MQ, Open API and KubernetesCollaborate and build the solutions that will help us scale our software across ever increasing production deploymentsInstall, configure, and maintain Oracle databases in development, testing, and production environments both On-Premises and On CloudMonitor and optimize database performance, including query optimization, indexing, and resource allocationWhat you'llneed:A minimum of a Bachelor of Science in Computer ScienceMinimum 5 years of professional experience developing software applications.A track record of designing and developing high-quality software using some of the following: C#, Entity Framework, WCF, LINQ, Microsoft SQL Server, GITExperience working with development teams to design features and the database designs to support themA system level mindset, with high attention to detail.A drive to understand how things work and solve problemsBe a proactive communicator who enjoys working closely with creative and technical peers.This person must be able to work in a fast-paced environment and support unscheduled events.Experience with Oracle Cloud Infrastructure (OCI)/ GCP and/or other cloud-based database solutionsExperience with Windows and Linux developmentOur EnvironmentUp to 10% of travel may be required. Employees must have a valid driver’s license and the ability to drive and/or fly to client and other customer locations.The employee is responsible for owning a credit card and managing expenses personally to be reimbursed on a bi-weekly basis.#LI-Hybrid#LI-JT1About SymboticSymbotic is an automation technology leader reimagining the supply chain with its end-to-end, AI-powered robotic and software platform. Symbotic reinvents the warehouse as a strategic asset for the world’s largest retail, wholesale, and food & beverage companies. Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. As the backbone of commerce the Symbotic platform transforms the flow of goods and the economics of supply chain for its customers. For more information, visitwww.symbotic.com.We are a community of innovators, collaborators and pioneers who embrace our differences, because we know unique perspectives make us stronger and smarter. Every perspective matters. We depend on the collective voices of our employees, customers and community to help guide us as we build a better place to work – for you and the world. That’s why we’re proud to be an equal opportunity employer.We do not discriminate based on race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, or genetic information.

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationSenior AWS Cloud EngineerPosition Overview:We are seeking a highly skilled Senior AWS Cloud Engineer with a minimum of 5 years of experience. The ideal candidate will have deep expertise in AWS services, cloud architecture, automation, and troubleshooting within complex production environments. This role involves designing, implementing, and managing scalable and reliable cloud solutions, collaborating closely with cross-functional teams to enhance infrastructure and support business growth. Key Responsibilities:AWS Cloud Implementation: Deploy and manage scalable, secure, and high-performance cloud infrastructures using AWS services such as VPC, EC2, EKS, ECS, Lambda, S3, DynamoDB, MSK, and more. Ensure high availability, fault tolerance, and disaster recovery capabilities. Automation and Infrastructure as Code (IaC): Implement and manage Infrastructure as Code using tools like AWS CloudFormation and Terraform. Automate cloud infrastructure deployment and management to minimize manual intervention and improve reliability. DevOps and CI/CD Pipeline Management: Build, manage, and optimize CI/CD pipelines using tools like Bitbucket, Jenkins/Bamboo, and Nexus/SRM/Blackduck. Collaborate with development and operations teams to integrate DevOps best practices into workflows. Containerization: Manage and support containerized applications using AWS EKS (Elastic Kubernetes Service) and ECS. Optimize the orchestration and deployment of microservices within containerized environments. Security and Compliance: Implement security best practices across cloud environments, including network security (security groups), encryption (KMS), and IAM policies. Ensure compliance with industry standards and regulations such as PCI and HIPPA. Monitoring, Performance, and Optimization: Leverage monitoring, logging, and alerting tools such as AWS CloudWatch, New Relic, OpsRamp, and Scalyr. Proactively monitor system performance and implement optimizations to ensure maximum efficiency and cost-effectiveness. Troubleshooting and Incident Response: Diagnose and troubleshoot complex cloud infrastructure and application issues. Provide root cause analysis for cloud infrastructure failures and work on continuous improvements. Cloud Cost Management and Optimization: Understand cloud spend and recommend areas for cost reduction and performance improvement. Ensure efficient use of cloud resources by leveraging AWS cost management tools and best practices. On-Call Support: Participate in a 24/7 on-call rotation to provide support for production environments and ensure high availability of services. Required Skills and Experience:Expert-level experience across a broad range of AWS services. Hands-on experience designing and deploying infrastructure using CloudFormation, Terraform, or other IaC tools. Extensive experience with CI/CD pipeline tools for automating software delivery. Strong expertise in Docker, Kubernetes, and managing containerized workloads in AWS EKS or ECS. Experience with cloud security best practices and compliance frameworks. Exposure to monitoring and logging tools to ensure optimal system performance. Basic experience with Linux system administration and troubleshooting in cloud environments. Hands-on experience in scripting languages such as Python or shell scripting. Preferred Qualifications:AWS certifications such as AWS Certified Solutions Architect (Professional) or AWS Certified DevOps Engineer. Experience with blue-green deployments, canary releases, and other deployment strategies. Familiarity with serverless technologies such as AWS Lambda and API Gateway. Soft Skills:Strong problem-solving abilities and a proactive mindset. Excellent communication and collaboration skills with both technical and non-technical teams. Ability to lead technical discussions and guide decision-making processes. If you're passionate about cloud engineering and excited to take on challenging projects in a dynamic environment, we'd love to hear from you! This is a hybrid role. Tuesday through Thursday are in-office days at BJ's Club Support Center in Marlborough, MA and Monday and Friday are remote days. In accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is starting from $98,000.00.

Description Looking for an opportunity to make an impact At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.Your greatest work is ahead!We are looking for a Substation Physical Engineer to join our team. As a Career Substation Physical Engineer, candidates will have the opportunity to work on projects for electric utilities at voltages from 12kV up to 500kV. This is an exciting and growing field in the power systems industry and allows candidates to get exposure to how the power generation such as that of renewable energy ties into the electric system. Candidates will be expected to use knowledge of digital logic design, AC and DC circuits to design substation electrical projects.HYBRID SCHEDULE: Candidates must live in Framingham, MA office's client servicing territory: MA, CT, NH, RI. (1 - 4 days in office.)Successful candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth including: Engineer in Training Certificate (EIT).Professional Engineer License (PE).Project Management Professional (PMP).Technical & Non-Technical Training Opportunities.Leadership Opportunities.Mentorship & Training Opportunities.Opportunity to Lead, Grow, and Inspire a Dynamic TeamAre you ready to make an impact Begin your journey of a flourishing and meaningful career, share your resume with us today!The Challenge: Experience in executing substation physical projectsExcellent communication skills and ability to interact with the internal team and clients to meet project needs.Performing quality control checks on substation physical design projects.Expected to read and understand substation drawings such as one-line drawings, three-line drawings, plan-section drawings, foundation, grounding drawings .Create and check bill of materials for substation physicalExpected to attend site visit at customer locationSuccessful candidates must comply with quality control and safe work practices and maintain compliance with project scope, schedule, and budget. This position will be a member of a design team comprised of engineers, designers, and CAD technicians and will work with client standards to implement design.What Sets You Apart:Bachelor’s degree in electrical engineering, or related degree with two (2+) or more years of related substation physical design experience.Experience with grounding studies/lightning protection and lighting studies.Demonstrate Excellent communication skills and ability to interact with the internal team and clients to meet project needs.Ability to meet deadlines under pressure situations.Collaborator and leader who can work effectively in team environment.Self-starter who works independently with minimal direction.Strong analytical skills and proven problem solver in both team and independent environments.High level of computer competency.Willingness to travel to project and/or client sites.You Might Also have:Engineer Intern (“EI” or “EIT”) professional certification.Professional Engineer (“PE”) License.Working knowledge of protection and control designExperience with bus calculationExperience with WinIGS or CDEGSMaster’s degree in related field.WHAT WE DO Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160municipals/cooperatives,as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. To explore and learn more, click here!At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference.PowerDeliveryPDSSUBSTATIONOriginal Posting Date:2025-02-05While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $67,600.00 - $122,200.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Who we areWith its A.I.-powered robotic technology platform, Symbotic is changing the way consumer goods move through the supply chain. Intelligent software orchestrates advanced robots in a high-density, end-to-end system – reinventing warehouse automation for increased efficiency, speed and flexibility.What we needSymbotic is looking for a Robotics Applications Engineer to join our Perception team. You will play a hands-on role in the design and implementation of the next generation of perception software for our mobile robots. The qualified candidate will play a hands-on role helping to bring our robotics solutions to our customers. We are looking for people who thrive in a creative, collaborative and agile development environment.What we do Our work matters – robotics is transforming the world of commerce. Every day our intelligent robots are responsible for getting food and merchandise to thousands of stores across North America. We’re an industry changer – we created the first and only fully autonomous, end-to-end supply chain solution. Today, we are driving towards even bigger ideas – and we have the people, technology, and leadership to fully realize these aspirations. We have the excitement and ambition of a startup with the benefits and resources of a proven organization.What you’ll doCollaborate with internal and external stakeholders to understand technical and business requirements.Design, develop, and maintain high-quality robotics applications for internal users and external customers.Develop and integrate solutions across various modules, including web-based dashboards, database, and robotics control.Create, execute, and maintain comprehensive test plans; identify and fix bugs while ensuring the integrity of the existing codebase.Contribute to system-level software design, ensuring scalability, reliability, and performance.Formulate, document, and maintain detailed requirements specifications.Analyze requirements and develop innovative solutions or effective workarounds to meet project needs.Identify potential project risks and proactively suggest and implement mitigation strategies.Up to 10% travel may be requiredWhat you’ll needBachelor or master’s degree in Robotics, Engineering, Computer Science, or a related technical field.Minimum 8 years of professional software development experience with Python and/or C++.Experience in database development using Kafka and Snowflake.Experience in messaging systems such as RabbitMQ and/or ZeroMQHands-on experience with ROS, Docker and Linux environments.Strong problem-solving skills and attention to detail.Familiarity with robotics remote operation and control applications is a big plusExperience in developing web-based applicationsExperience with project management and collaboration tools like JIRA, Confluence.Exposure to agile development practices and CI/CD pipelines.Familiarity with graphical user interfaces (GUI) developmentKnowledge of computer vision applications and libraries.Our EnvironmentUp to 10% of travel may be required. Employees must have a valid driver’s license and the ability to drive and/or fly to client and other customer locations.The employee is responsible for owning a credit card and managing expenses personally to be reimbursed on a bi-weekly basis.#LI-JT1#LI-HybridAbout SymboticSymbotic is an automation technology leader reimagining the supply chain with its end-to-end, AI-powered robotic and software platform. Symbotic reinvents the warehouse as a strategic asset for the world’s largest retail, wholesale, and food & beverage companies. Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. As the backbone of commerce the Symbotic platform transforms the flow of goods and the economics of supply chain for its customers. For more information, visitwww.symbotic.com.We are a community of innovators, collaborators and pioneers who embrace our differences, because we know unique perspectives make us stronger and smarter. Every perspective matters. We depend on the collective voices of our employees, customers and community to help guide us as we build a better place to work – for you and the world. That’s why we’re proud to be an equal opportunity employer.We do not discriminate based on race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, or genetic information.

Join the team which delivers highly differentiated silicon into Blink and Ring battery powered devices. Our validation team works on state-of-the art SoCs in a vertically integrated team environment to deliver products our customers love. The team works backwards from customer requirements to build super-low power, energy efficient designs that include the latest in AI, video processing, low power communications and CMOS fabrication technology.Because we are vertically integrated we directly get to see products built and ship based on our silicon.We work directly with product teams to increase the velocity of features and time to ship products.Key job responsibilities- Design and develop hardware products, including circuit boards, components, and systems, while adhering to industry standards and best practices.- Generate and maintain hardware design, testing, and quality control documentation.- Participate in design reviews, risk assessments, and product validation activities to ensure compliance with regulations.- Collaborate with cross-functional teams, including design, development and customer support, to provide feedback and input on product design, performance optimisation, and manufacturability.A day in the life- Execute comprehensive test plans, test cases, and test scripts to validate the performance, functionality, and durability of hardware products.- Conduct thorough testing and validation of hardware products to ensure compliance with specifications, requirements and quality standards.- Perform root cause analysis and troubleshooting of hardware defects and implement preventive measures for malfunctions to minimise future occurrences.- Stay up to date with the latest advancements in hardware testing methodologies and apply them to improve the overall quality of our products.BASIC QUALIFICATIONS- Bachelor’s degree in Electrical Engineering, Computer Engineering, or a related field.- 3+ years of demonstrable experience as a computer hardware engineer.- Strong knowledge of hardware design principles, testing tools, equipment, and techniques (mainly PCB designing).- Excellent analytical and problem-solving skills with an eye for detail and precision.- Ability to work independently and manage multiple tasks simultaneously. PREFERRED QUALIFICATIONS- Proficiency in programming languages, like C/C++ and/or Verilog/VHDL.- Knowledge of hardware regulatory requirements, such as FCC and CE.- Strong Electrical Engineering fundamentals- Familiarity with corner lot characterization- Lab debug experience and/or FPGA debug- Strong written and verbal skillsAmazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status.Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit https://amazon.jobs/content/en/how-we-hire/accommodations for more information. If the country/region you’re applying in isn’t listed, please contact your Recruiting Partner.

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationManage assigned projects to an on-time and on-budget completion to include new and takeover club locations; remodels and expansions; and new club gas facilities. This position is responsible for assisting and coordinating with real estate directors for the hiring of Consultant teams; representing the companies interests in public meetings and hearings; facilitating complete project approvals from State, Federal and local municipalities; the development of construction documentation that is in accordance with the company prototype, budget and schedule; on all assigned new club developments. Project involvement will range from Landlord reverse build-to-suits to full self-develop owned projects which may include surplus property for other retail uses. This position is to maintain a current schedule and budget update on all assigned projects and report same to real estate directors on an as needed basis.Utilize existing criteria for RFP's and solicit quotes for Consultant's scope of work with assistance from the real estate directors. Support real estate directors in developing conceptual site plans and establishing projectCoordinate efforts with the real estate directors of the project team through the conceptual design and due diligence phase of the project in order to establish the development feasibility, preliminary construction budgets and schedules. Support the Real Estate Directors negotiations by providing information/documentation necessary to complete the project. Assist and coordinate the development of approval and construction documents. Work with the project team to insure compliance with the project parameters, budget and schedule. Insure the accuracy and timeliness of document development. Attend working sessions and public hearings with state and local municipality staff to review projects and prepare for public hearings. Coordinate with the project team and insure that permits are issued; fees are filed; bonds are procured; and agencies are notified in advance of constructionSchedule and arrange project meetings with Consultants, Attorneys and BJ'sAdminister contract invoicing, amendments, change orders and close out documentation for allDevelop an entitlement timeline with the team to be incorporated into the overall project schedule. Coordinate the development of construction documents for the building, civil, off-site and gas in order to maintain the approved schedule for permitting and construction. Report the progress of project approvals in order to maintain an updated project schedule that management can rely on for scheduling club openings and events. Qualifications:Bachelor’s Degree in civil engineering required, 2 to 3 years’ experience in field. Retail Corporate or Civil Engineering Design firm experience a plus. General knowledge of land use planning/civil engineering principles and with Regulatory Agency/Municipal approval process. Familiarity with retail site design with understanding of soils, drainage, environmental and other related activities. Awareness of legal and environmental issues related to land. In accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is starting from $80,000.00

Description Looking for an opportunity to make an impact At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.Your greatest work is ahead!We are looking for a Lead Substation Physical Engineer to join our team. As a Career Substation Physical Engineer, candidates will have the opportunity to work on projects for electric utilities at voltages from 12kV up to 500kV. This is an exciting and growing field in the power systems industry and allows candidates to get exposure to how the power generation such as that of renewable energy ties into the electric system. Candidates will be expected to use knowledge of digital logic design, AC and DC circuits to design substation electrical projects.HYBRID SCHEDULE: Candidates must live in Framingham, MA office's client servicing territory: MA, CT, NH, RI. (1 - 4 days in office.)Successful candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth including: Engineer in Training Certificate (EIT).Professional Engineer License (PE).Project Management Professional (PMP).Technical & Non-Technical Training Opportunities.Leadership Opportunities.Mentorship & Training Opportunities.Opportunity to Lead, Grow, and Inspire a Dynamic TeamAre you ready to make an impact Begin your journey of a flourishing and meaningful career, share your resume with us today!The Challenge: Experience in executing substation physical projectsExcellent communication skills and ability to interact with the internal team and clients to meet project needs.Performing quality control checks on substation physical design projects.Expected to read and design substation physical drawings such as one-line drawings, three-line drawings, plan-section drawings, foundation, grounding drawings.Create and check bill of materials for substation physicalExpected to attend site visit at customer locationSuccessful candidates must comply with quality control and safe work practices and maintain compliance with project scope, schedule, and budget. This position will be a member of a design team comprised of engineers, designers, and CAD technicians and will work with client standards to implement design.What Sets You Apart:Bachelor’s degree in electrical engineering, or related degree with eight (8+) or more years of related substation physical design experience.Experience with grounding studies/lightning protection and lighting studies.Demonstrate Excellent communication skills and ability to interact with the internal team and clients to meet project needs.Ability to meet deadlines under pressure situations.Collaborator and leader who can work effectively in team environment.Self-starter who works independently with minimal direction.Strong analytical skills and proven problem solver in both team and independent environments.High level of computer competency.Willingness to travel to project and/or client sites.You Might Also have:Engineer Intern (“EI” or “EIT”) professional certification.Professional Engineer (“PE”) License.Working knowledge of protection and control designExperience with bus calculationExperience with WinIGS or CDEGSMaster’s degree in related field.WHAT WE DO Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160municipals/cooperatives,as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. To explore and learn more, click here!At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference.PowerDeliveryPDSSUBSTATIONOriginal Posting Date:2025-02-05While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $104,650.00 - $189,175.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Featuredjob

Description Looking for an opportunity to make an impact At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.Your greatest work is ahead!We are looking for a Lead Substation Protection & Control Engineer to join our team. As a Career Protection & Control Engineer, candidates will have the opportunity to design substation protection and control projects for electric utilities at voltages from 12kV up to 500kV. This is an exciting and growing field in the power systems industry and allows candidates to get exposure to how the power generation such as that of renewable energy ties into the electric system. Candidates will be expected to use knowledge of digital logic design, AC and DC circuits to design substation electrical projects.HYBRID SCHEDULE: Candidates must live in Framingham, MA office's client servicing territory. MA, CT, NH, RI. (1 - 4 days in office.)Successful candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth including: Engineer in Training Certificate (EIT).Professional Engineer License (PE).Project Management Professional (PMP).Technical & Non-Technical Training Opportunities.Leadership Opportunities.Mentorship & Training Opportunities.Opportunity to Lead, Grow, and Inspire a Dynamic TeamIn this role, you can also expect to gain experience in the following:Interfacing with Local Clients.Partnering with a Variety of Utility Clients Nationwide.Working with different types of projects ranging from distribution to transmission level voltages.Electrical Power Calculations.Interactions with Other Disciplines (Substation, Telecom, and Civil Structural, etc).Are you ready to make an impact Begin your journey of a flourishing and meaningful career, share your resume with us today!The Challenge: Relay One Line Design.Three Line AC Schematic Design.DC Protection Schematic Design.Panel Layout and Wiring Design.Develop Bill of Materials Based on Design Criteria.Quality Control Checks on Wiring Design.Complete Project Lifecycle Support from Scoping to Final Design and Implementation.Construction Support.Applying the Minimum Requirements of the National Electrical Safety Code to the Design ProcessesWorking with Client Standards to Implement Design.Working with a Designer/Drafter to Create the Required Drawings for Each Project.Successful candidates must comply with quality control and safe work practices and maintain compliance with project scope, schedule, and budget. This position will be a member of a design team comprised of engineers, designers, and CAD technicians and will work with client standards to implement design.What Sets You Apart:Bachelor’s degree in electrical engineering, or related degree with eight (8+) or more years of Substation protection control design and/or field testing/commissioning experienceExperience in executing substation protection and control projects.Demonstrate Excellent communication skills and ability to interact with the internal team and clients to meet project needs.Ability to read and design substation protection and control drawings such as one-line drawings, three-line drawings, AC/DC schematic drawings and wiring design.Ability to meet deadlines under pressure situations.Collaborator and leader who can work effectively in team environment.Self-starter who works independently with minimal direction.Strong analytical skills and proven problem solver in both team and independent environments.High level of computer competency.Willingness to travel to project and/or client sites.You Might Also have:Engineer Intern (“EI” or “EIT”) professional certification.Professional Engineer (“PE”) License.Experience performing quality control checks on small substation protection and control design projects.Experience working on CAD tools.Master’s degree in related field.Field testing/commissioning experience.WHAT WE DO Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160municipals/cooperatives,as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. To explore and learn more, click here!At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference.PowerDeliveryPDSSUBSTATIONOriginal Posting Date:2025-02-05While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $104,650.00 - $189,175.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Featuredjob

Description Looking for an opportunity to make an impact At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.Your greatest work is ahead!We are looking for a Lead Substation Protection & Control Engineer to join our team. As a Career Protection & Control Engineer, candidates will have the opportunity to design substation protection and control projects for electric utilities at voltages from 12kV up to 500kV. This is an exciting and growing field in the power systems industry and allows candidates to get exposure to how the power generation such as that of renewable energy ties into the electric system. Candidates will be expected to use knowledge of digital logic design, AC and DC circuits to design substation electrical projects.HYBRID SCHEDULE: Candidates must live in Framingham, MA office's client servicing territory. MA, CT, NH, RI. (1 - 4 days in office.)Successful candidates can look forward to a fast paced, diverse work environment and flexible work hours/work arrangements as well as managers who will encourage career development and growth including: Engineer in Training Certificate (EIT).Professional Engineer License (PE).Project Management Professional (PMP).Technical & Non-Technical Training Opportunities.Leadership Opportunities.Mentorship & Training Opportunities.Opportunity to Lead, Grow, and Inspire a Dynamic TeamIn this role, you can also expect to gain experience in the following:Interfacing with Local Clients.Partnering with a Variety of Utility Clients Nationwide.Working with different types of projects ranging from distribution to transmission level voltages.Electrical Power Calculations.Interactions with Other Disciplines (Substation, Telecom, and Civil Structural, etc).Are you ready to make an impact Begin your journey of a flourishing and meaningful career, share your resume with us today!The Challenge: Relay One Line Design.Three Line AC Schematic Design.DC Protection Schematic Design.Panel Layout and Wiring Design.Develop Bill of Materials Based on Design Criteria.Quality Control Checks on Wiring Design.Complete Project Lifecycle Support from Scoping to Final Design and Implementation.Construction Support.Applying the Minimum Requirements of the National Electrical Safety Code to the Design ProcessesWorking with Client Standards to Implement Design.Working with a Designer/Drafter to Create the Required Drawings for Each Project.Successful candidates must comply with quality control and safe work practices and maintain compliance with project scope, schedule, and budget. This position will be a member of a design team comprised of engineers, designers, and CAD technicians and will work with client standards to implement design.What Sets You Apart:Bachelor’s degree in electrical engineering, or related degree with eight (8+) or more years of Substation protection control design and/or field testing/commissioning experienceExperience in executing substation protection and control projects.Demonstrate Excellent communication skills and ability to interact with the internal team and clients to meet project needs.Ability to read and design substation protection and control drawings such as one-line drawings, three-line drawings, AC/DC schematic drawings and wiring design.Ability to meet deadlines under pressure situations.Collaborator and leader who can work effectively in team environment.Self-starter who works independently with minimal direction.Strong analytical skills and proven problem solver in both team and independent environments.High level of computer competency.Willingness to travel to project and/or client sites.You Might Also have:Engineer Intern (“EI” or “EIT”) professional certification.Professional Engineer (“PE”) License.Experience performing quality control checks on small substation protection and control design projects.Experience working on CAD tools.Master’s degree in related field.Field testing/commissioning experience.WHAT WE DO Leidos is a trusted and technology-focused solutions provider. Utilities and mobile operators rely on our Power Delivery Services Team for reliable power and telecommunication expertise, as reflected through our work with more than 50 investor-owned utilities, more than 160municipals/cooperatives,as well as a growing number of mobile operators, local utility providers and private developers. In addition to providing engineering and project management services, Leidos works with an established group of industry-leading construction partners delivering meaningful Energy Delivery Solutions. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms. To explore and learn more, click here!At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.We take care of our employees. Leidos seeks the best and the brightest, and in return, we invest in you, with an eye on your future, through career advancement, growth opportunities and continuous improvement via mentoring, formal and informal project management training and assistance with obtaining pertinent certifications. We challenge you to help solve some of the world’s toughest problems, and reward you with a welcoming culture that recognizes the importance of a strong work/life balance, as well as competitive compensation and benefits. We believe that diversity and inclusion make us all better and offer the chance to have fun and make a difference.PowerDeliveryPDSSUBSTATIONOriginal Posting Date:2025-02-05While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $104,650.00 - $189,175.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.#Featuredjob

Description Looking for an opportunity to make an impact At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customer’s success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.If this sounds like the kind of environment where you can thrive, keep reading!We are in search of a Relay Settings Engineering Manager to join our diverse and fast-paced Framingham, MA organization. As a core team member, you will be interacting with other electric utility disciplines, playing a valuable part in leading and designing utility substation and renewable energy projects. Our recognition as an industry leader is confirmed by the latest national rankings by Engineering News-Record (ENR) ranking Leidos within the Top 10 T&D Firms, and Top 10 Power Firms.In this role, you can also expect to gain:Leadership skills to create path to be an Engineering director.NERC PRC compliance expertise, Electrical Power Calculations and standard developmentInteractions with other disciplines (Substation, Protection & Controls, and Civil Structural)Time management and organizational skillsInteraction with clients leading to interpersonal skillsIn this role, the qualified individual will be expected to:Lead team of 8+ engineers to develop relay settings from 4.16kV through 500kV including relay set points, logic diagrams, configuration files and documentation.Possessing experience in managing and leading a team of engineers.Review work provided by Client and assess requirements of scopes.Demonstrating extensive expertise in proposal development.Showcasing significant expertise in business development and collaborating with field engineers.Comply with Leidos and Client Safety requirements as well as design and quality expectations.Solving challenging substation engineering problems for entire project cycleClearly communicate design and engineering requirements to both internal teams and external vendors on behalf of clients.Working with protection engineers and performing quality reviews on relay setting packages.Create logic diagrams for IEC61850 substations.Working directly with clients as well as working with other staff in remote office locations.Assignments will cover the full range of project planning through design and construction support.What you will bring to the table:Bachelors of Science in Electrical Engineering (BSEE) ten (10+) years of related experience.Possessing experience in managing and leading a team of engineers.Demonstrating extensive expertise in proposal development.Showcasing significant expertise in business development and collaborating with field engineers.Experience with creating relay settings, settings calculation templates and logic diagrams highly preferred.Experience working with EPC clients is preferred.Capable of using either Aspen OneLiner, ETAP, Power Tools SKM and/or Siemen’s CAPE for coordination studies and fault study analysis.Preparation of protective relay coordination studiesExperience with development of relay settings for microprocessor relays including: SEL, Alstom, GE, ABB and others. For both transmission line relays (Line Differential, Step Distance and Pilot Schemes) and substation relays (Capacitors, Transformers and buses)Being familiar with Schweitzer AcSELerator QuickSet, General Electric EnerVista and Schneider Electric MiCOM software is a plus.Strong engineering and interpersonal skills and high attention to detail with a passion for quality.Experience creating & implementing protection and control schemes including interpreting schematics and wiring diagrams and implement relay logic.Ability to meet deadlines under pressure situations.Team player who can work effectively in team environment.Self-starter who will work independently with minimal direction.Strong written and verbal communication skills required when interfacing with clients and staff.High level of computer competencyYou May Also Have: Experience preparing technical reports.Familiarity with PTC MathCAD softwarePrevious Quality Assurance/Quality Control experiencePeriodic travel may be required. About 15%.Relay testing and troubleshooting experience.Previous Power Consulting or Power utility business experiencePDSSUBSTATIONPowerDeliveryOriginal Posting Date:2025-02-26While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $104,650.00 - $189,175.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Looking for an opportunity to make an impact Leidos is dedicated to making the world a safer place. This starts with helping our customers in the Defense Industry achieve their critical missions. Our dedicated Defense Group employees are solving critical challenges across the globe. At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.Are you ready for your next career challenge The Airborne Systems Business Area, part of the Defense Sector at Leidos, currently has an opening for a cleared Information Assurance Engineer to work in our office near Hanscom AFB. This is an exciting opportunity to use your experience helping the Air Force Research Lab, Air Force Lifecycle Management Center, and other DoD missions. Your role will be to support our diverse portfolio of programs through a combination of software design and development, hardware interfacing and integration, laboratory experimentation, ground and flight testing to deploy cutting edge, next generation solutions.Primary ResponsibilitiesAs part of the Leidos Security Team, you will be responsible forsafeguarding the organization’s systems and networks against threats, breaches, and unauthorized access. This includes monitoring systems for unusual activity, conducting vulnerability assessments, implementing security measures such as firewalls and encryption protocols, and responding to security incidents. You will be expected to perform penetration testing, risk analysis, and security audits to identify and mitigate vulnerabilities, ensuring compliance with industry regulations and best practices. Additionally, you will be maintaining security tools, developing incident response plans, and collaborating with both system owners and government partners to enhance the overall cybersecurity posture. Qualified candidates will have knowledge, experience and demonstrated ability to perform tasks related to assessing, securing, and monitoring IT systems. Candidates will have the ability to work independently and apply the proper procedures and process related to their area of expertise. You will assist the ISSM in the development of Risk Management Framework (RMF) security package documentation such as System Security Plans (SSP), Standard Operating Procedures (SOPs), security control assessments, self-inspections and any relevant Plans of Action and Milestones (POAMs).Manages and provides full accreditation support to meet DoD cybersecurity policies including Security Technical Implementation Guides (STIGs), Security Requirements Guides (SRGs)Conducts studies and analysis of proposed operations modifications, identifies and documents alternative operations solutions, develops strategic and tactical plans, strategies, and standards. Assists with development and maintenance of the System Security Engineering Plan, Cybersecurity Plan, Security assessment Report, operating procedures, Plan of Action and Milestones (POA&Ms), Risk Assessment Report, and all associated artifacts required to obtain accreditation.Provides management of resources and ensures schedules are met to achieve accreditation.Author and maintain Standard Operating Procedures (SOPs), policies, and appropriate patch/security documentation including policies detailing patch and security update processes and procedures.Assess compliance with relevant NIST and DoD standards for STIG and patch compliance.Develops and maintains a Cybersecurity Supply Chain Risk Management (C-SCRM) Plan that properly identifies and mitigates supply chain risks and utilizes all current and successor publications (e.g., NIST 800-161 and NIST 800-53).Conduct risk and vulnerability assessments of planned and installed information systems to identify vulnerabilities, risks, and protection needs of Windows and Linux systemsPromote awareness of security issues and communicationof deficiencies to ISSMs and ISOs.Recommend and implement programs to ensure that systems, networks, and data users are aware of, understand, and adhere to systems security policies and proceduresEnsure the rigorous application of information security/cybersecurity policies, principles, and practices in the delivery of all IT services.Basic QualificationsMust have an active DoD TS clearance with the ability to obtain TS/SCIBA/BS or equivalent experience and 4+ years of prior relevant experience or Masters with 2+ years or prior relevant experience in Cybersecurity/Information Technology/Computer ScienceDoD 8570 IASAE I or higher professional cybersecurity certification (aka CISSP or equivalent)Strong understanding of networking concepts such as OSI Model, LAN/WAN, IPv4/IPv6, subnetting, VLANs, edge services & point-to-point VPNExperience with identity management & authentication tools such as LDAP, SAML, and PKIExperience with backup and recovery of on-prem and virtualized IT infrastructureExperience with the DoD Risk Management Framework (RMF) including assessment of risks and the managing, interpreting, and updating Plans of Action and Milestones (POA&Ms)Familiarity and experience with NIST cybersecurity guidelines including NIST SP 800-53 and SP 800-171Familiarity and experience with DoD cybersecurity operations including DoD and USAF instructions/guidelinesFamiliarity and experience with Special Access Program (SAP) cybersecurity, JSIG, and Operational Security (OPSEC) practicesExperience creating the body of evidence for an ATO packageExperience working in a SIL environmentStrong understanding of information security and cybersecurity policies, principles, and practices in the delivery of all IT services.User level experience in traversing Linux directories and executing scripts.Experience in risk and vulnerability assessments of information systems to identify vulnerabilities, risks, and protection needs.Experience in documenting system deficiencies and recommending solutions for remediation.Experience with participating in security evaluations, audits, and reviews.Be able to learn new technologies and skills that are essential to cybersecurity roles and responsibilities.Strong desire to grow and learn new technologies.Ability to communicate effectively in writing and verbally from informal one-on-one discussions or in a small group environment.Ability to work within a dynamic work environment, ability to handle multiple tasks at once (multi-task)Preferred Qualifications.Active DoD TS/SCI clearanceFamiliar with DOD Communication Security (COMSEC)Experience interpreting system scanning tool outputs/assessments (Nessus, SCAP, Evaluate STIG, etc.) and determining the optimal means for cybersecurity findings remediationExperience with DevSecOps, Agile software development, and the SAFe Agile methodologyFamiliarity with code scanning tools for Static Code Analysis, Third Party Code Provenance, Third Party Dependencies, Software Vulnerabilities, Container Health Assessment and Dynamic Code AnalysisExperience with On-Prem and Cloud (AWS, Azure, Google Cloud, etc.) computing environmentsFamiliarity and experience managing cybersecurity teams in a DoD/USAF operational environmentFamiliarity with log aggregation and SIEM tools such as Splunk, ELK, Grafana, Solar Winds, etc.Experience with Docker container and deployment technologies, such as Terraform, Kubernetes, OpenShift, Helm, EKS, AKSFamiliarity with Jenkins CI/CD pipeline code building and tools and gating principlesAn understanding of the hardening of API Gateways and API EndpointsAtlassian Tools Suite experience (Bitbucket, Confluence, JIRA)Experience in in designing and implementing VNet/VLAN ports, protocols and services settings to restrict communications across Cloud-native virtual networking boundariesExperienced in basic Linux and Windows administrationOriginal Posting:May 2, 2025For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $85,150.00 - $153,925.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Looking for an opportunity to make an impact Leidos is dedicated to making the world a safer place. This starts with helping our customers in the Defense Industry achieve their critical missions. Our dedicated Defense Group employees are solving critical challenges across the globe. At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. We empower our teams, contribute to our communities, and operate sustainably. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business.Are you ready for your next career challenge The Airborne Systems Business Area, part of the Defense Sector at Leidos, currently has an opening for a cleared Test Engineer to work in our office near Hanscom AFB, MA. This is an exciting opportunity to use your experience helping the Air Force Research Lab, Air Force Lifecycle Management Center, and other DoD missions. Your role will be to support our diverse portfolio of programs through a combination of software design and development, hardware interfacing and integration, laboratory experimentation, ground and flight testing to deploy cutting edge, next generation solutions.Primary ResponsibilitiesWorks with the project team to ensure testability of software and system requirements and capabilities.Troubleshoots software & systemsApplies appropriate principles, standards, processes, procedures and tools throughout the software development life cycle.Duties include software requirements analysis, analysis of hardware compatibility, development of software products and tools used for design, development and maintenance of infrastructure, and platformsCollaborate with Test Team members over execution of the test process.Collaborates with the Cybersecurity team as required to support the RMF processCreates test plan and procedures for embedded software to verify capabilities and requirements; including interface testing.May brief parties external to the organization (e.g., sub-contractors, vendors, etc.)Basic QualificationsBachelor’s degree and 4+ years of prior relevant experience or a Master’s degree with 2+ years of prior relevant experience: OR additional years of experience in lieu of degree. Must be a US CitizenMust have an active DoD TS clearance with the ability to obtain TS/SCIExperience working with embedded systemsExperience working in a SIL and HWIL environmentAbility to liaise with, speak and present effectively to personnel at all levels of the organization.Ability to work independently and as part of a test team.Demonstrated test plan and test report writing skills.Demonstrated ability to develop and execute test plans and test reportingExperience in data collection and analysis to verify accuracy of test objectives met.Strong desire to grow and learn new technologies.Ability to communicate effectively in writing and verbally from informal one-on-one discussions or in a small group environment.Ability to work within a dynamic work environment, ability to handle multiple tasks at once (multi-task)Preferred QualificationsActive DoD TS/SCI clearanceDatalink/Mesh Network testing experienceCOMSEC ExperienceFamiliar with Agile Methodologies, preferably SCRUM or KanbanExperience with Atlassian tools such as JIRA, Confluence, Bitbucket, Zephyr, TestRailOriginal Posting:May 8, 2025For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $85,150.00 - $153,925.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Description Leidos’ Security Enterprise Solutions (SES) operation is seeking a Software Engineer (C++) in Tewksbury, MA to join our cross-functional engineering team using cutting edge technology to develop truly novel solutions that make travel and trade safer, healthier, and more efficient on a global level.We are seeking local candidates in the Tewksbury, MA area that can work onsite full time. We are offering a 9/80 work schedule (Every Other Friday Off!) As a Software Engineer (C++) on our diverse and collaborative team, you will work alongside our expert Scientists and Engineers, contributing to Leidos products with global impact on security detection. This isn’t your run-of-the-mill software development – you’ll be honing your engineering skills with embedded products, real-time programming, and object-oriented design, all with the support of a management team focused on your professional growth and advancement. Working under general supervision in a diverse team, your primary responsibility will be to develop, modify and troubleshoot multi-tiered distributed applications and systems. The duties and responsibilities may change from time to time without notice and include but are not limited to the duties described below.Primary Responsibilities:Design, build, and maintain efficient, reusable, and reliable C++ code using good OOP/OOAD techniques for our systems.Optimize, identify bottlenecks, bugs, and devise solutions to problems including: Maintain code quality, revision control and organization, Analyze customer issues and identify and implement solutions, Participate and contribute within a defined software development process.Occasional travel to customer sites may be required. Travel may be domestic and international.Basic Qualifications:Bachelor's degree or higher. Additional years of experience will be considered in lieu of a degree.Must have the ability to obtain a Public Trust clearance (US citizenship required).Knowledge of C++ and OOP/OOADUnderstanding of data structures, algorithms, and software design solutions.Preferred Qualifications:GPU Programming with CUDA and/or OpenGL (Highly Desirable)Graphics Design, GUI developmentExperience with Qt 5 or aboveLinux Platform developmentInterfacing with hardware and real-time debugging.Good working knowledge of SQLWorking knowledge of CybersecurityWorking knowledge of networking solutions.Experience with Scrum/Agile development methodologiesThe Leidos Security Enterprise Solutions (SES) team has developed a suite of integrated solutions for aviation, ports, borders, and critical infrastructure customers around the world. We provide automated threat detection for weapons, narcotics, explosives, contraband, and undeclared goods, as well as nuclear and radioactive materials, by leveraging industry leading screening technologies, AI/ML capabilities and advanced biometric tools. We have more than 24,000 products deployed across 120 countries, including best-in-class security checkpoint and inspection systems for people, checked baggage and more.Check out the links below to learn more about Security Enterprise Solutions (SES)https://careers.leidos.com/pages/security-enterprise-solutionshttps://www.leidos.com/markets/aviation/security-detectionOriginal Posting:May 6, 2025For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above.Pay Range:Pay Range $55,250.00 - $99,875.00The Leidos pay range for this job level is a general guideline onlyand not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.