FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Job Description:Saab Inc., Autonomous and Undersea Systems division is seeking an innovative and experienced Senior Staff Systems Engineer to lead others on technical teams through capturing, decomposing, analyzing, deriving, allocating, implementing, and verifying product and systems design requirements for autonomous Unmanned Surface/Underwater Vehicles (aUSVs/aUUVs, AUVs) and Remotely Operated Vehicles (ROVs).Responsibilities include, but are not limited to:Decompose stakeholder needs and Concepts of Operation into system/sub-system level requirements. Perform functional analysis, derivation, and allocation to lower level system/sub-system elements. Experience with Model Based System Engineering (MBSE) is a plus.Apply fundamentals and best practices of system engineering to create innovative solutions and solve challenging problems. Experience with Design for Manufacturability a plus.Develop and execute system/sub-system integration and test activities; maintain Requirement Verification Test Matrix (RVTM) with System Integration and Test Engineering.Conduct data modeling and analysis as needed; experience with control system modeling, analysis, and design is a plusConduct alternatives analyses and propose solutions in support of stakeholder change requests.Present and discuss technical concepts, tradeoffs, analyses, designs, and performance estimates.Interface with other disciplines to develop/define/implement customer requirements.Follow through on full product lifecycle: development, prototyping, integration, verification, delivery, and support as required including operations and sea-testing.Participate in technical reviews and status meetings.Collaborate and communicate with internal and external stakeholders.Follow company standard operating procedures and Quality System requirements.Plan, organize, and estimate required effort for responsible tasks, including possibly writing Basis of Estimates (BOEs).Work within a team environment to achieve goals.Support mentoring and engineering staff development.Compensation Range: $154,600 - $200,900The compensation range provided is a general guideline. When extending an offer, Saab, Inc. considers factors including (but not limited to) the role and associated responsibilities, location, and market and business considerations, as well as the candidate's work experience, key skills, and education/training.Skills and Experience:Required Skills and Experience:Bachelor's degree in Engineering, Physics, Mathematics or related discipline, Master’s degree is a plus.8+ years of relevant experience in advanced system design with broad application and a fundamental understanding of the product development life cycle.Ability to develop system architectures and configurations meeting or exceeding customer needs.Ability to specify interfaces including physical/mechanical and electrical characteristics, and communication protocols.Fundamental understanding of industry accepted design methods and practices, including design spaces/tradeoffs, test data analysis, and requirement/specification change processes.Significant product development background demonstrating a strong engineering aptitude and good problem-solving skills.Demonstrated ability to resolve issues during design, development and execution of system engineering activities.Experience with CORE/Doors/Other requirements management tools, MatLab/MathCad/Ansys/Other analysis packages, MSOffice including (Excel, Word, Visio, PowerPoint, Outlook, etc.) to create drawings, documents, work products, and presentations. Experience with Cameo, MagicDraw, MSProject, SolidWorks, AutoCad, Creo, are pluses.Familiarity with standard data collection, test, environmental (thermal, shock, vibe) and integration equipment, facilities, and test techniques.Ability and willingness to support all phases of programs from concept development through final acceptance is required; this will often include on-site support for customer meetings, support equipment installation, configuration, integration, optimization, delivery and acceptance testing.Strong written and verbal interpersonal and communication skills.Proven contributor on project teams to accomplish objectives.Proven contributor on project teams to accomplish objectives.Effective contributor in a team environment, providing technical leadership where applicable.Ability to work independently to achieve technical and program requirements.Ability to work with other engineering disciplines to contribute to a collaborative development environment.Must hold or be able to obtain U.S. DoD SECRET security clearance.Ability to travel up to 25%, both international and domestic.Desired Skills and Experience:Prior experience with DoD or with U.S. government customers is highly desirable.Experience developing products/solutions for Naval and Marine applications.Familiarity with Military Standards, ruggedized equipment design, and environmental test requirements.Knowledge of materials and corrosion control.Extensive familiarity with the design and development of autonomous surface and underwater systems.Citizenship Requirements:Must be a U.S. citizen. Applicants selected may be subject to a government security investigation and must meet eligibility requirements for access to classified information.Drug-Free Workplaces: Saab is a federal government contractor and adheres to policies and programs necessary for sustaining drug-free workplaces. As a condition of employment, candidates will be required to pass a pre-employment drug screen.Benefits:Saab provides an excellent working environment offering professional growth opportunities, competitive wages, work-life balance, business-casual atmosphere and comprehensive benefits:Medical, vision and dental insurance for employees and dependentsPaid time off including: minimum of 3 weeks vacation, 5 floating holidays, 8 designated holidays, parental leave, personal illness, bereavement, jury duty, long-term and short-term disability401(k) with immediate vesting on employer matchTuition assistanceStudent loan assistanceWellness account, Care.com subscription and employee assistance programsEmployee stock purchase program with employer matchAbout Us:Saab is a leading defense and security company with an enduring mission, to help nations keep their people and society safe. Empowered by its 19,000 talented people, Saab constantly pushes the boundaries of technology to create a safer, more sustainable and more equitable world. In the U.S., Saab delivers advanced technology and systems, supporting the U.S. Armed Forces and the Federal Aviation Administration, as well as international and commercial partners. Headquartered in Syracuse, New York, the company has business units and local employees in eight U.S. locations.Saab is a company where we see diversity as an asset and offer unlimited opportunities for advancing in your career. We are also a company that respects each person’s needs and encourage employees to lead a balanced, rewarding life beyond work. Saab values diversity and is an Equal Opportunity/ Affirmative Action employer. All qualified individuals are encouraged to apply and will be considered for employment without regard to race, color, religion, national origin, sex (including pregnancy), sexual orientation, gender identity, age, veteran, disability status, or any other federal, state, or locally protected category.

JOB DESCRIPTION: Lead Process Engineer Burlington, MA, USA Poly6, an emerging leader in aerospace and defense innovation, is enabling production of complex turbine engine designs by combining additive manufacturing, advanced computation and material science. Our technology is uniquely suited to increase the efficiency of complex manufacturing processes as well as advance engineering design capabilities. Long term benefits of Poly6’s products include reduced greenhouse gas emissions for the aviation sector. You will have the opportunity to work alongside a highly talented team to solve problems in one of the world’s most complex engineering sectors: aviation. JOB SUMMARY Reporting to the Plant Engineering Manager, the Lead Process Engineer - Additive Manufacturing will be primarily focused on the process control and technical execution of additive manufacturing processes within the manufacturing facility in Burlington, MA, and secondarily to assist with technology transfer to a scaled greenfield manufacturing facility in Ohio. This position requires a strong working knowledge of process control, manufacturing, materials science, with strong investigational and root cause analysis skills. Specific job-related responsibilities include: RESPONSIBILITIES Lead the control and optimization of manufacturing processes, focusing on stability, statistical process control (SPC), and effective change management during scale-up. Maintain and analyze process parameters, connecting process inputs to product outputs to optimize control limits and enhance overall product quality. Understand and optimize material interactions with manufacturing processes to improve product performance and reliability. Measure and control Key Process Variables (KPVs), diagnosing and monitoring out-of-control events to ensure stable and predictable operations. Contribute to cross-functional projects aimed at process control, scrap reduction, and continuous improvement. Support root cause analyses for process non-compliances and ensure timely corrective actions. Help maintain robust process documentation, identifying and implementing opportunities for workflow improvements. Provide hands-on technical assistance, including repairing, improving, installing, maintaining, and validating manufacturing equipment. Collaborate cross-functionally on continuous improvement initiatives related to equipment implementation, cost reduction, and productivity enhancements. Support product engineering efforts by providing process analysis, data reporting, and recommendations. Standardize preventative maintenance systems and documentation for manufacturing equipment, ensuring adequate training for seamless handoff to operational counterparts. Offer rapid-response daily production support, including personnel training, data/scrap analyses, troubleshooting process problems, and performing equipment maintenance. Support Design of Experiments (DOEs) and trial execution to validate process improvements and changes, including participation in PFMEA and JSA initiatives as needed. Participate in special projects as assigned by management. QUALIFICATIONS Bachelor’s degree in Engineering (or related field) with 2-4 years of relevant experience, or 4+ years of equivalent experience in a manufacturing environment. Demonstrated experience in controlled manufacturing environments focusing on process control, process improvement, and operational excellence. Proficiency in applying SPC and DOE methodologies for process analysis and improvement. Working knowledge of statistical analysis software (e.g., Minitab, JMP) and advanced Microsoft Excel skills. At least 1 year of practical experience applying Six Sigma principles in manufacturing, with documented project successes. Hands-on experience with manufacturing equipment, processes, and related software tools. PREFERRED EXPERIENCE Experience with polymer or similar material applications in industrial manufacturing. Strong skills with the Microsoft Office suite. Excellent verbal and written communication abilities, with a track record of working effectively across engineering and operations teams. Hands-on experience operating, maintaining, and optimizing production processes, including familiarity with CAD models and related tools. Understanding of processes, systems, and technical aspects of scaled manufacturing operations. A data-driven mindset focused on driving innovation and improving process capability and efficiency. Six Sigma Green Belt or equivalent certification. Experience with control plans and data collection systems for process monitoring and reporting. Involvement in new process development and scale-up activities. Understanding of material interactions within manufacturing processes and the ability to optimize for improved performance. This position requires access to information protected under U.S. export control laws, including the International Traffic in Arms Regulations and/or the Export Administration Regulations. Please note that any offer for employment may be conditioned on authorization to receive software or technology controlled under these U.S. export laws without sponsorship for an export license. Poly6 is an equal opportunity employer. We do not discriminate based on age, color, genetic information, religion, sex, veteran status, or national origin. This is a non-management positionThis is a full time position

Wollaston Alloys/CPP Boston is a stainless steel and high alloy sand casting foundry that has been based in Braintree, MA for over 60 years! We manufacture components for the defense market as well for commercial markets such as power generation industries. Wollaston Alloys/CPP Boston is a fast-paced company that has continued to grow over its long history! Wollaston Alloys/CPP Boston is seeking a driven individual to join our team as a Methoding Processing Engineer! The Methoding Processing Engineer is a crucial position within our facility. This is an excellent opportunity for to join a fast-paced company that has continued to grow over the past 60 years! CPP offers a competitive compensation and benefits package, which includes a bonus program, medical/dental/vision/life/disability insurance, 401K with match, paid vacation and holidays, paid training, and a great team culture!Essential Job Functions/Duties Communicate effectively with internal customers providing updates to progress against key milestones.Manage scrap reduction in the production operation.Design and simulate pattern rigging for new and existing product and create process techniques to produce and control the metallurgical and NDT integrity of the product.Develop and maintain operational sequences for part manufacture in conjunction with Administrative, Manufacturing, Quality, and NDT disciplines.Create and manage project timelines to move product through the shop, providing regular status updates to engineering and production management.Develop and manage BOMs and ensure accurate standard costs.Keep milestone updates and obtain agreements from internal customers.Troubleshooting in production processes related to Engineering.Create and maintain the documentation of work instructions and procedures for front end production processes.Work with shop floor personnel to provide an understanding of work instructions.Oversee NPI sampling process.Maintain engineering records of tooling, procedures, and customer drawings. QUALIFICATIONSRequired Qualifications: Education: Bachelor’s degree in engineering or related field requiredExperience: Required: 1+ years in a manufacturing setting. Plus: 2+ years in sand or investment casting foundry.Other Required Knowledge, Skills & Abilities: Attention to detail, ability to communicate at all levels of the organization, working knowledge of SolidWorks (or equivalent CAD software), MS Office Suite (Word, PowerPoint, Excel), ability to work with others through complex situations. CPP-Boston is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. CPP-Boston, as a supplier of Aerospace and Defense products, is required to comply with U.S. government export control regulations. In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification document form upon hire. This is a full time position

WHO YOU WILL WORK WITHYou will work closely with the GM, Product lead, Nike Sports Research Lab lead, Engineering and Design teams, Program Management and Finance, to bring safe and reliable products to market. You will work across the Nike matrix to build support from product testing functions across the company.WHO WE ARE LOOKING FORWe are looking for a Test/Design Verification Engineering Lead to join a newly formed team developing innovative, powered athlete products.WHAT YOU BRINGBachelor’s degree or equivalent combination of education, experience and trainingBachelor’s degree in engineering preferred7+ years of relevant industry experienceDemonstrated ability to effectively work cross-functionally with Product Development, Engineering, QA.Specific experience operating automated test equipment including Instron machines. Electropulse a plus.Experience in validation and experimentation design to prove/disprove system or product functionality, reliability, and specification call-outs.Problem-solving and troubleshooting skills.Interpersonal and written communication skills.Experience with Python and grasshopper a plusResults orientation, team skills, ability to multi-task, ability to learn quickly, ability to respond to urgent needs of the team and deliver expected results within expected deadlines.Ability to serve as a technical resource for assessing validation requirements, solving test related problems, and drawing on resources across the organization to build effective test infrastructure.Proficiency in statistical analysis.Positive energy, curiosity, and a passion for building magical products that users love.Strong technical savvy and understanding/curiosity about emerging innovative technologies.Ability to work in a fast-paced environment where continuous learning is core to our identity.Willingness to roll up your sleeves to win as a team.WHAT YOU WILL WORK ONAs Test / DVE Lead, you will play a critical role in driving the execution of our powered athlete product roadmap. You will be responsible for ensuring that products shipped meet all applicable quality and performance criteria, validating functionality, reliability, and performance of products/prototypes using existing and invented quality metrics.IN THIS ROLE YOU WILL• Validate and test product performance and reliability from creation through production, with specific focus on digital footwear integration.• Participate in definition and execution of consumer product test and validation with specific focus on root-cause analysis of failure modes, and integration of detailed testing as a component in quality product development.• Manage of multiple external vendors/consultants (both domestic and international) in product development and test support, as well as direct interaction with Wear Test Coordinators in the footwear categories supporting management of long term and short-term wear testing.• Develop test procedures and metrics to assess product performance where no best-practice guidelines for testing or qualification exist; develop test and measurement systems as needed.• Drive test/validation methodology improvements, as well as process improvement and feedback to the engineering process. Participate in the early-stage engineering and product development process to provide footwear insight into the design process from the start.• Assist in specification and execution of quality, accuracy, and testing procedures across multiple partners and disciplines including traditional reliability testing, four corner testing, performance validation, and software quality assurance.• Utilize a wide range of appropriate statistical methodologies and techniques to demonstrate quality and efficacy. • Provide input on the equipment/process/software validation requirements and design control activities for new product development projects.We offer a number of accommodations to complete our interview process including screen readers, sign language interpreters, accessible and single location for in-person interviews, closed captioning, and other reasonable modifications as needed. If you discover, as you navigate our application process, that you need assistance or an accommodation due to a disability, please complete the Candidate Accommodation Request Form.

Overview: GovCIO is currently hiring for a Journeyman Unified Communications Deployment Engineer to provide telecommunications support to their local area, and travel around the US for unified communications deployment activities. This position is primarily located in Boston, MA and is an onsite position. Responsibilities: Performs a variety of electronic and technical assignments on data, telecom, and audiovisual communications equipment and systems. Completes endpoint troubleshooting using appropriate diagnostic equipment. Installs terminals, controllers, and test equipment and restores nonworking lines and/or equipment to working condition. Maintains liaison with outside vendors and orders circuits and/or equipment as required. Requires knowledge of specific hardware, test equipment, and terminal configuration. May develop recommendations for the combined usage of data processing and telephone system hardware and software.Conducts site surveys and meets contacts like clients, construction crew members, utility company personnel, and people from other departments within the Company.Installs, moves, commissions, and modifies audiovisual, telecommunications and related equipment according to job order specifications, standards, and procedures.Undertakes systems upgrades and answers queries related to system controls, and maintenance of the systems in general.Diagnoses equipment malfunctions. Maintains and repairs systems and equipment according to manufacturer recommendations and specifications.Reports and monitors service order changes.Be responsible for general local video operations and maintenance support as part of normal IT site support duties. This task does not include designing, engineering, specifying or acquiring video equipment. This support shall include basic troubleshooting of system problems and repairs, when they are identified by enterprise video support staff.Work with enterprise level voice and video engineers and technicians to conduct more detailed remote troubleshooting and repairs.Assist in setting up presentation devices and Video Conference units and provide basic troubleshooting support as needed. This includes ensuring functionality, being available for events, and shutting down video conferences.Perform local voice operations and maintenance support related to videoteleconferences. This support shall include basic troubleshooting of system problems and repairs whenthey are indicated by enterprise voice support staff. This task does not include designing, engineering,specifying or acquiring voice communications equipment.Provide on-call support by identifying, researching, and resolving technical problems received via the ServiceNow ticketing system.Interact with network services, software systems engineering, and/or applications development to restore service and/or identify and correct core problems. Perform routine system maintenance and analysis functions, including hardware configurations and adding, removing and replacing equipment components.Below is a non-comprehensive list of technologies that the technician may encounter. The ideal candidate will understand the purpose of these technologies and have some experience with them, or with equivalent technologies:Cisco IP audio and video endpoints, Unified Call Manager (CUCM), Expressway Meeting Server (CMS), Meeting Management (CMM), Telepresence Management Suite (TMS), Prime, and Identify Services Engine.Broadsoft CloudMicrosoft System Center Configuration Manager (SCCM)Avaya technologies including audio/video components, Communicator, One-X, Application Enablement Server (AES), and the following at version 6.0 or above: Communications Manager, Session/System Manager, and Aura Messaging.Polycom DMA, Real Presence, and endpointsSolarwindsSplunk (syslog)CyberArkICAM / Single Sign On methodologies (SSO) / CertificatesInfoBlox / AkamaiSIP routing, dial pattern and number translations, E.164 routing, PRI as well as standards-based codecs, to include codecs from Cisco and PolycomVideo Conferencing Services (VCS) infrastructureUnified Communications and Video conferencing, including but not limited to: Cisco Unified Communications Manager, Unity Connection, TEAMS, UCCX, Expressways, Jabber Client, SIP, H.323, and QoSSession Border Controllers (SBC), Cisco Unified Border Elements (CUBEs) Qualifications: High School with 0-3 years (or commensurate experience)Clearance Required: Must be able to obtain and hold a Public Trust ClearanceRequired Skills and ExperienceUSCitizenHigh degree of technical proficiencyExcellent problem-solving skills and analytical abilitiesMust be prepared for regional travel up to 25% at customer locations.#NSS#NEON#DL Company Overview: GovCIO is a team of transformers--people who are passionate about transforming government IT. Every day, we make a positive impact by delivering innovative IT services and solutions that improve how government agencies operate and serve our citizens.But we can't do it alone. We need great people to help us do great things - for our customers, our culture, and our ability to attract other great people. We are changing the face of government IT and building a workforce that fuels this mission. Are you ready to be a transformer We are an Equal Opportunity Employer.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, disability, or status as a protected veteran. EOE, including disability/vets. Posted Pay RangeThe posted pay range, if referenced, reflects the range expected for this position at the commencement of employment, however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, education, experience, and internal equity. The total compensation package for this position may also include other compensation elements, to be discussed during the hiring process. If hired, employee will be in an “at-will position” and the GovCIO reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, GovCIO or individual department/team performance, and market factors. Posted Salary Range: USD $70,000.00 - USD $70,000.00 /Yr.

Clean Harbors is a dynamic and innovative company leveraging cutting-edge technologies to drive business success. We are seeking a dynamic and experienced Cloud Security Engineer. The cloud security engineer helps design, deploy, and operate a secure cloud infrastructure that aligns with business needs. The position is responsible for supporting operational innovation and providing security direction to elevate the company’s security posture within a cloud computing infrastructure. The cloud security engineer helps deliver infrastructure at scale and with resiliency to support business initiatives. The cloud security engineer is also expected to possess administrative and troubleshooting skills, and be knowledgeable about cloud architecture, engineering and design principles.Why work for Clean Harbors Health and Safety is our #1 priority, and we live it 3-6-5!Competitive wages and robust career growth opportunities.Comprehensive health benefits coverage after 30 days of full-time employment.Group 401K with a company matching component.Generous paid time off, company-paid training, and tuition reimbursement.Positive and safe work environments, with sustainability as a core value.Develop and maintain secure, resilient enterprise-grade cloud administration processes in tandem with architects and system engineers.Conduct rigorous oversight of security systems and security configuration administration to reduce risk to enterprise systems and accounts. Deploy strong identity and access management (IDAM) and Privileged Access management (PAM) controls across computing environments. Attend regular technical project and implementation meetings and serve as the security consultant to help guide secure application and infrastructure configurations.Actively monitor, assess and recommend tactical and strategic initiatives based on new and emerging threats posing risk to cloud computing environments.Manage remediation efforts after security assessment findings outline weaknesses requiring attention.Document, formulate and enforce areas of security improvement that balance risk with business operations and do not diminish efficiencies or innovation.Assist in maintaining strong oversight with cloud computing vendors and solution providers to safeguard against undue risk presented by external entities. Escalate to security management and appropriate administration teams when points of weakness are discovered.Act as a key figure in incident response to track occurrence and resolution, with documentation and reporting as well as engagement with the security team.Attend and fully engage in change and project management meetings.5+ years’ experience in cybersecurity as a practitioner and with at least 2+ years exposure to Microsoft Azure, Oracle Cloud Infrastructure, Amazon Web Services (AWS), and/or VMware.Holds or working toward one or more including: CCSP, CISSP, Azure, or Oracle cloud AWS Certified Cloud Practitioner or additional AWS advanced certifications such as AWS Certified DevOps Engineer, VMware Certified Professional. Expertise with Windows support and experienced in cloud networking architecture and cloud operations, with cloud access security broker (CASB) experience preferred.Network and encryption experience, including virtual private networks (VPNs), IPsec, SSL/TLS, LDAP and public key infrastructure (PKI).IDAM experience, including OAuth and OpenID.Experience with scripting languages such as PowerShell, JavaScript, and Python.Experienced in the use of threat intelligence services in a production environment.Up-to-date understanding of a wide-range of incident response, system configuration, vulnerability management and hardening guidelines.Track record of acting with integrity, taking pride in work, seeking to excel, being curious and adaptable, and communicating effectively.Familiarity with tools such as Git, Jira, and Aha!Demonstrated problem-solving abilities to manage complex local and international security requirements.Self-motivated and -directed, well-organized and able to position controls in anticipation of threats.The position requires lifting, pulling, pushing, or carrying up to 10 lbs.Wondering what to expect in starting your career with Clean Harbors Click Hereto view a Day in the Life Video!40 + years of sustainability in action.At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harborsis the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us.Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us athttps://careers.cleanharbors.com/.Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class.Clean Harbors is a Military & Veteran friendly company.*CH#LI-AN2

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationManage assigned projects to an on-time and on-budget completion to include new and takeover club locations; remodels and expansions; and new club gas facilities. This position is responsible for assisting and coordinating with real estate directors for the hiring of Consultant teams; representing the companies interests in public meetings and hearings; facilitating complete project approvals from State, Federal and local municipalities; the development of construction documentation that is in accordance with the company prototype, budget and schedule; on all assigned new club developments. Project involvement will range from Landlord reverse build-to-suits to full self-develop owned projects which may include surplus property for other retail uses. This position is to maintain a current schedule and budget update on all assigned projects and report same to real estate directors on an as needed basis.Utilize existing criteria for RFP's and solicit quotes for Consultant's scope of work with assistance from the real estate directors. Support real estate directors in developing conceptual site plans and establishing projectCoordinate efforts with the real estate directors of the project team through the conceptual design and due diligence phase of the project in order to establish the development feasibility, preliminary construction budgets and schedules. Support the Real Estate Directors negotiations by providing information/documentation necessary to complete the project. Assist and coordinate the development of approval and construction documents. Work with the project team to insure compliance with the project parameters, budget and schedule. Insure the accuracy and timeliness of document development. Attend working sessions and public hearings with state and local municipality staff to review projects and prepare for public hearings. Coordinate with the project team and insure that permits are issued; fees are filed; bonds are procured; and agencies are notified in advance of constructionSchedule and arrange project meetings with Consultants, Attorneys and BJ'sAdminister contract invoicing, amendments, change orders and close out documentation for allDevelop an entitlement timeline with the team to be incorporated into the overall project schedule. Coordinate the development of construction documents for the building, civil, off-site and gas in order to maintain the approved schedule for permitting and construction. Report the progress of project approvals in order to maintain an updated project schedule that management can rely on for scheduling club openings and events. Qualifications:Bachelor’s Degree in civil engineering required, 2 to 3 years’ experience in field. Retail Corporate or Civil Engineering Design firm experience a plus. General knowledge of land use planning/civil engineering principles and with Regulatory Agency/Municipal approval process. Familiarity with retail site design with understanding of soils, drainage, environmental and other related activities. Awareness of legal and environmental issues related to land. In accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is starting from $80,000.00

ESSENTIAL DUTIES and RESPONSABLITIES includes but not limited to the following.Performing the installation, maintenance, repair and operation of mechanical, electrical and power generation equipment and systems to support the critical environment of our Lab/office buildings.Operates systems in a safe and efficient manner in accordance with government regulatory compliance and standard operating procedures.Ability to quickly learn building control, electrical and UPS systems, utilizing on the job training, operations manuals and documentation.Performs predictive, planned, preventative and routine maintenance as well as equipment rounds and service requests as directed. Performs maintenance in accordance with the JLL Preventative Maintenance Program. Assist with the development and improvement of preventative maintenance programs, schedules, work instructions, SOP ’s and operational procedures.Inspects and repairs pumps, fans, valves, and motors ensuring proper operation of the client equipment and systems. Performs all duties in a safe manner and in accordance with established work standards and practices.Performs visual and operational inspection of associated equipment and interprets specifications, blueprints and job standards to perform assigned duties.Establishes work procedures to meet production schedules.Recommends measures to improve production methods, equipment performance and quality of product, suggesting changes in working conditions and use of equipment to increase efficiency of department, shop, or work crew.Determines and/or assists with analyzing and resolving work problems and achieving work goals Maintains time and production records and customer service requests. .Must be comfortable and flexible enough to work with a wide-ranging and changing scope of responsibilities while adhering to the constraints of procedures put in place to minimize the risk for human error.Team player with the desire to foster teamwork to help create a positive working environment. Control the daily operation of all mechanical equipment in the physical plant and buildingsPerform maintenance and repairs to the Mechanical, Plumbing, Structural, Furniture, Fire, Life Safety, and Control systems for the facility to keep these systems up to applicable standardsMonitor Maintains responsibility for tenant services, preventative maintenance, purchasing and inventory control, contracted maintenance, general maintenance and technical proficiencyMonitoring operation and maintaining refrigeration, water cooling and air conditioning equipment, boilers, heating, ventilating and hot water equipment, pumps, valves, piping and filters, other mechanical and electrical equipmentPerforms and/or completes all tenant service requests accurately and expediently.Be able to evaluate building systems to monitor and to improve performance to operate efficiently.Complies with all policies and procedures established for the building, including safe storage, usage, and disposal of hazardous materials while maintaining a clean and safe workplacePeriodically acts as the on-call engineer for the portfolio of office buildings.Actively participates in emergency response procedures, technical and safety training programs. Perform all work using the proper safety equipment and in a safe manner.QUALIFICATIONS – To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.EDUCATION/EXPERIENCE– A high school diploma or GED is required. A minimum four (4) years experience in the building maintenance industry and accredited trade school degree in HVAC, electronic, or other industry related trade. Union training and certification is also acceptable. Must have Universal CFC certification. Should be knowledgeable in the safe and proper use of the following tools: ladders, lifts, basic hand tools, volt meter, manual drain auger, plumbers helper, safety goggles, ear protection, and fire extinguisher.LANGUAGE SKILLS- Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Have the ability to write routine reports and correspondence.MATHEMATICAL SKILLS- Ability to calculate figures and amounts such as load balancing, proportions, percentages, area, circumference, and volume. Have the ability to apply concepts of basic algebra and geometry.REASONING ABILITY- Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Have the ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule format.PHYSICAL DEMANDS- Physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Theemployee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds.WORK ENVIRONMENT- The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock, moving mechanical parts and heights up to 30 feet. The employee is occasionally exposed to wet and/or humid conditions as well as very cold and uncomfortable heat while inside and out of the facility. The noise level in the work environment is at times moderately loud.#PMR1

Who we areWith its A.I.-powered robotic technology platform, Symbotic is changing the way consumer goods move through the supply chain. Intelligent software orchestrates advanced robots in a high-density, end-to-end system – reinventing warehouse automation for increased efficiency, speed and flexibility.What we needWe are looking for a talented Senior Mechanical Engineer to join our Strategic Projects team within our Core Engineering Org. In this role you will contribute to the entire product lifecycle, from concept to commercialization, of our cutting-edge automated systems. Your expertise in mechanical and structural systems design will be instrumental in developing reliable, efficient, and innovative solutions that bring a step change transformation in our systems. What we doThe Strategic Projects Team is part of our Core Hardware Org and is a fast-growing team that specializes in innovation and new product development from concepts to commercialization. The products in focus are of strategic importance to the business.What you’ll doLead Design and Development: Conceptualize, design, and develop complex structural systems for our mobile robots. Analysis and Optimization: Perform analysis, including FEA and tolerance analysis, to optimize designs for performance, cost, and manufacturability. Cross-Functional Collaboration: Work closely with electrical, software, controls, manufacturing, and quality engineering teams to ensure seamless integration and product success. Problem-Solving: Identify and troubleshoot design challenges, implement effective solutions, and drive continuous improvement. Communication: Clearly communicate complex technical information to both technical and non-technical audiences. Contribute to a collaborative team environment and a culture of learning. Hands-on Engineering: Actively participate in prototyping, building, testing, and iterating on designs. Documentation: Create clear and accurate dimensional drawings per ANSI Y14.5 standards with GD&T. Create and manage Bill of Materials (BOMs) and Engineering Change Orders (ECOs) in PLM. Up to 20% of travel may be required.What you’ll needBachelor's degree or higher in Mechanical EngineeringMinimum of 8 years of relevant industry experienceStrong foundation in mechanical design principles and hands-on experience with electromechanical systems. Solid experience in CAD software (SolidWorks preferred). Experience with FEA tools (SolidWorks Simulation or Ansys preferred). Demonstrated ability to select and integrate components such as motors, sensors, and actuators.Experience with a variety of manufacturing processes (machining, casting, sheet metal, plastics). Excellent problem-solving, analytical, and critical thinking skills. Strong communication and interpersonal skills.Proven ability to work effectively as part of a team.Passion for robotics, automation, and innovation.Experience in industrial robotics, automation, or material handling (preferred).Knowledge of PLM systems (preferred).Experience with design for manufacturing and assembly (DFMA) (preferred).Our environmentUp to 20% of travel may be required. Employees must have a valid driver’s license and the ability to drive and/or fly to client and other customer locations. The employee is responsible for owning a credit card and managing expenses personally to be reimbursed bi-weekly.#LI-DW1#LI-OnsiteAbout SymboticSymbotic is an automation technology leader reimagining the supply chain with its end-to-end, AI-powered robotic and software platform. Symbotic reinvents the warehouse as a strategic asset for the world’s largest retail, wholesale, and food & beverage companies. Applying next-gen technology, high-density storage and machine learning to solve today's complex distribution challenges, Symbotic enables companies to move goods with unmatched speed, agility, accuracy and efficiency. As the backbone of commerce the Symbotic platform transforms the flow of goods and the economics of supply chain for its customers. For more information, visitwww.symbotic.com.We are a community of innovators, collaborators and pioneers who embrace our differences, because we know unique perspectives make us stronger and smarter. Every perspective matters. We depend on the collective voices of our employees, customers and community to help guide us as we build a better place to work – for you and the world. That’s why we’re proud to be an equal opportunity employer.We do not discriminate based on race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity, gender expression, veteran status, or genetic information.

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

Wollaston Alloys/CPP Boston is a stainless steel and high alloy sand casting foundry that has been based in Braintree, MA for over 60 years! We manufacture components for the defense market as well for commercial markets such as power generation industries. Wollaston Alloys/CPP Boston is a fast-paced company that has continued to grow over its long history! Wollaston Alloys/CPP Boston is seeking a driven individual to join our team as a QualityEngineer! The Quality Engineer is a crucial position within our facility. This is an excellent opportunity for to join a fast-paced company that has continued to grow over the past 60 years! CPP offers a competitive compensation and benefits package, which includes a bonus program, medical/dental/vision/life/disability insurance, 401K with match, paid vacation and holidays, paid training, and a great team culture! Major Responsibilities Coordinate with our customer’s Engineering, Quality, and Purchasing representatives, suppliers, and all departments and levels of CPP workforce providing, on a tactical level the technical support and the direction necessary to ensure compliance with the intent of customer quality expectations.Build an atmosphere of competence, cooperation and trust with customer representatives via Supplier Product, Systems and Qualification Surveys.Take active participation in our Continuous Improvement efforts, promote quality excellence, and encourage teamwork among ourselves and our customers.Be proactive, innovative, and creative using judgment and decision making in the implementation of necessary quality programs. Qualifications Bachelor’s degree from four-year college or university in Engineering or a related field; or one to two years related experience and/or training; or equivalent combination of education and experience.Must have a comprehensive knowledge of quality and quality systems, such as AS9100 orNADCAP.3 - 5 years of work experience in an foundry or related fieldFamiliarity with the investment casting industry and related processes is desirableStrong communication skills, good PC skills, program management skillsKnowledge of Six Sigma and Lean Manufacturing a plusAble to work independently with minimal directions Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This is a non-management positionThis is a full time position

Reporting to the Chief Product Officer, the VP of Product of Engineering (Custom .NET) is responsible for overseeing teams of software platforms and providing leadership, vision, product strategy/roadmap and direction for the platform engineering organization. This position is responsible for recruiting, developing and retaining talent, as well as ensuring the staff has the skills and capabilities to meet business needs. They oversee the implementation of platform engineering initiatives and are responsible for championing best practices and ensuring initiatives achieve business outcomes. This individual should be a demonstrated leader with the ability to assimilate multiple concurrent projects and prioritize key initiatives that align with C-Suite strategic goals.Ensure that Health and Safety is the number one goal by following policies, processes, and acting in a safe manner at all times;Create, build, and guide the overall strategy and execution for homegrown Custom .NET software application products at Clean Harbors; Must understand integration concepts to integrate Custom .NET software with SaaS and On Prem third party softwareWill be able to identify the “why” of the product, establish a vision, and be able to align that vision with the company business objectives;Provide thought leadership, strategic insight, and clear communication to the platform engineering team on the strategy and roadmap for multiple complex internal softwareMust understand the problems and needs of the customers and be able to adapt and ensure there are positive product experiences and product success;Recruit and develop a dynamic platform engineering team to build, launch, and scale enterprise software applications;Oversee and drive end to end application development ensuring the standards are being followed for the entire SDLC lifecycle.Work closely and collaboratively with all players of the MIS team beginning with the platform owners along with the architects and the development team on large multi team, multi quarter projects to deliver robust, scalable high quality software applicationsCollaborate with cross-functional business stakeholders to define, scope for large multi-team, multi-quarter projects. Continue work with the stakeholders to ensure adoption of the project including rollout and implementation phases on completion of the development lifecycleTrack key metrics for the different roles in the SDLC lifecycle for continuous improvement within the MIS organization and hold team members accountableTrack progress, assess risks, coordinate delivery, and actively communicate contingency and mitigation plans for the team;Work cross-functionally with senior business leaders, including C-Level executives, representing sales and marketing, finance, human resources, and legal to make sure their objectives are met, opinions are considered, and plans communicated;Collect and analyze feedback from customers, stakeholders, and other teams to shape requirements, features, and end products. Bachelors’ Degree in Computer Science, Information Systems, or Business Administration;At least 10 years of proven software Product Management experience;At least 7 years of proven experience leading Product Management teams; Proven ability to build, launch and scale software products;Experience in leading product or applications teams working on building cross functional software that integrates with Oracle or Salesforce products is a big plus;Ability to handle many concurrent projects and proactively reprioritize to meet business and product priorities without needing guidance;Experience working with Engineering teams as a Product Manager and have demonstrable experience leading cross-functional teams to define, execute and iterate on large multi-team, multi-quarter projects;Comfortable working with SQL or spreadsheets to analyze data as well as conducting research through various discussions with customers and teammates. Wondering what to expect in starting your career with Clean Harbors Click Here to view a Day in the Life Video! 40-years of sustainability in action. At Clean Harbors, our mission is to create a safer, cleaner environment through the treatment, recycling, and disposal of hazardous materials. Clean Harbors is the leading provider of environmental, energy and industrial services throughout the United States, Canada, Mexico and Puerto Rico. Everywhere industry meets environment, Clean Harbors is on-site, providing premier environmental, energy and industrial services. We are solving tough problems through innovation and proven methodology – come be part of the solution with us. Join our safety focused team today! To learn more about our company, and to apply online for this exciting opportunity, visit us at https://careers.cleanharbors.com/. Clean Harbors is an equal opportunity employer. We do not discriminate against applicants due to race, ancestry, color, sexual orientation, gender identity, national origin, religion, age, physical or mental disability, veteran status, or on the basis of any other federal, state/provincial or local protected class. Clean Harbors is a Military & Veteran friendly company. #LI-DF1*CH

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday