FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Preferred Skills, Experience and License: Minimum of two years of experience as a supervisor or lead technician; five years of hands-on experience with heavy-duty truck maintenance. In-depth knowledge of heavy truck systems: hydraulic, air brake, electric-over-hydraulic, and CNG engines. Proficiency with diagnostic software (OEM-specific and aftermarket). Familiarity with DOT inspections, FMCSA regulations, and PM compliance. Working knowledge of welding, fabrication, and electrical systems is a plus. Experience in the refuse or sanitation industry strongly preferred. Valid driver's license; CDL is a plus. Preferred Education and Certifications: Degree in Diesel Mechanics or Automotive Technology a plus. Technical Certifications a plus, including: ASE in medium/heavy trucks (T-Series), particularly, T2 (Diesel Engines), T4 (Brakes), and T6 (Electrical/Electronic Systems). CNG fuel system safety; EPA 608/609 refrigerant handling; OSHA 10, OSHA 30. I. Job Summary Supervises and provides direct leadership for technicians and mechanics. Manages workflow and assigns tasks. II. Essential Duties and ResponsibilitiesTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. Oversees the day-to-day operations of employees in the maintenance shop, including mechanics, technicians, welders, container maintenance and support staff.Coordinates and supervises all maintenance work and repairs of refuse collection vehicles, roll-off trucks, automated side loaders and related equipment; monitors progress and quality.Reviews driver repairs and other maintenance requests; prepares work order documents.Monitors inventory of replacement parts and restocks as needed.Oversees personnel, provides coaching, training, mentorship, and technical guidance. Evaluates employee performance, conducts reviews and disciplinary action as needed. Provides input into termination, compensation, and promotion decisions.Interprets and ensures consistent application of organizational policies and safety regulations.Performs mechanical duties as needed. Diagnoses and resolves issues involving complex systems including: Hydraulic and pneumatic systems used for lift arms and compactors.Air brake systems and associated safety components.Electric-over-hydraulic control systems for automated functions.Compressed Natural Gas (CNG) engines and associated fuel systems.Creates and submits reports as necessary. Maintains detailed service records, inspections, and compliance documentation in accordance with DOT, EPA, OSHA, and company standards.Implements and monitors preventive maintenance schedules and work orders to maximize uptime and extend vehicle lifecycle.Coordinates with operations to prioritize fleet availability and minimize disruption to service routes.Ensures adherence to safety protocols and environmental regulations for hazardous materials, fuel handling, and shop safety.Maintains parts inventory and initiate procurement of tools, equipment, and vehicle components.Utilizes fleet management software and diagnostic tools for tracking, reporting, and decision-making.Participates in budget planning and control maintenance expenses while achieving operational targets. III. Supervisory ResponsibilitiesThe highest level of supervisory skills required in this job is the management of non-supervisory employees. This includes: Direct supervision of, approximately, 28 full-time employees including: mechanics, technicians, welders, container maintenance staff and clerks. IV. QualificationsThe requirements listed below are representative of the qualifications necessary to perform the job.A. Education and Experience Education: High School Diploma or GED (accredited)Experience: Four (4) years of relevant work experience. B. Certificates, Licenses, Registrations or Other Requirements None required. C. Other Knowledge, Skills or Abilities Required Maintenance and repairs skills, and supervisory experience may be required. V. Work EnvironmentListed below are key points regarding environmental demands and work environment of the job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. Primarily shop-based with regular exposure to outdoor elements. May require frequent walking, standing, bending, lifting up to 75 lbs. Exposure to noise, grease, fumes, and potentially hazardous substances. BenefitsAt WM, each eligible employee receives a competitive total compensation package including Medical, Dental, Vision, Life Insurance and Short Term Disability. As well as a Stock Purchase Plan, Company match on 401K, and more! Our employees also receive Paid Vacation, Holidays, and Personal Days. Please note that benefits may vary by site.If this sounds like the opportunity that you have been looking for, please click “Apply.”

Job Overview: We are seeking an experienced and highly skilled HVAC Controls Technician to join our team in Rhode Island. The ideal candidate will have a deep understanding of HVAC systems, excellent troubleshooting abilities, and a commitment to delivering high-quality service. This position involves installation, maintenance, repair, and diagnostics of residential and commercial HVAC systems. Key Responsibilities: Install, maintain, and repair HVAC systems, including air conditioning units, heating systems, ventilation, and refrigeration.Experience with DDC ControlsPerform regular inspections, troubleshooting, and diagnostic tests on HVAC systems to ensure efficient operation.Provide expert guidance to customers on HVAC system maintenance, energy efficiency, and upgrades.Lead and oversee junior technicians, providing training, guidance, and support when needed.Ensure all work complies with local, state, and federal codes, including Rhode Island regulations and safety standards.Collaborate with the service team to schedule appointments, track job progress, and provide exceptional customer service.Maintain accurate records of service calls, work completed, parts used, and time spent on jobs.Respond to emergency service requests and resolve HVAC-related issues in a timely and professional manner.Recommend and implement system upgrades, replacements, and other improvements to optimize system performance.Ensure proper use and maintenance of tools and equipment.Stay up-to-date on industry trends, new technologies, and best practices. Qualifications: Rhode Island HVAC CertificateRhode Island EPA CertificateMinimum of 5 years of hands-on experience in HVAC installation, maintenance, and repair.Extensive knowledge of HVAC systems, including troubleshooting and diagnostics.Building Automated Controls” BAC knowledge and understandingStrong ability to work independently and in a team environment.Exceptional customer service skills and a commitment to quality workmanship.Ability to read and interpret blueprints, manuals, and schematics.Excellent communication skills, both written and verbal.Ability to lift and carry heavy equipment (up to 50 lbs).Valid driver’s license and clean driving record.Ability to work on-call or during evenings/weekends as needed.OSHA certification or other relevant safety certifications preferred.NIAGRA CertifiedBuilding Automation (BAS) Schedule: Full-time days (Monday-Friday, 6am-2:30pm) Pay Rate: $41.62 per hour. The pay listed is the hourly range or the hourly rate for this position.A specific offer will vary based on the applicant’sexperience, skills, abilities, geographic location,and alignment with market data. Benefits:ABM offers a comprehensive benefits package. For information about ABM’s benefits, visitABM 2025 Employee Benefits | Staff & Management #400About Us ABM (NYSE: ABM) is one of the world’s largest providers of facility services and solutions. A driving force for a cleaner, healthier, and more sustainable world, ABM provides essential services and forward-looking performance solutions that improve the spaces and places that matter most. From curbside to rooftop, ABM’s comprehensive services include janitorial, engineering, parking, electrical and lighting, energy and electric vehicle charging infrastructure, HVAC and mechanical, landscape and turf, and mission critical solutions. ABM serves a wide range of industries – from commercial office buildings to universities, airports, hospitals, data centers, manufacturing plants and distribution centers, entertainment venues and more. Founded in 1909, ABM serves over 20,000 clients, with annualized revenue approaching $8 billion and more than 100,000 team members in 350+ offices throughout the United States, United Kingdom, Republic of Ireland, and other international locations. For more information, visit http://www.abm.com. ABM is proud to be an Equal Opportunity Employer qualified applicants without regard race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected factor under federal, state, or local law. ABM is committed to working with and providing reasonable accommodation to individuals with disabilities. If you have a disability and need assistance in completing the employment application, please call . We will provide you with assistance and make a determination on your request for reasonable accommodation on a case-by-case basis. ABM participates in the U.S. Department of Homeland Security E-Verify program. E-Verify is an internet-based system used to electronically confirm employment eligibility. ABM is a military-friendly company proudly employing thousands of men and women who have served in the U.S. military. With ABM, you’ll have access to a world-class training program and ample opportunities to use the skills you developed while serving our country. Whether you’re looking for a frontline or professional position, you can find post-military career opportunities across ABM. ABM directs all applicants to apply at http://www.abm.com/ ABM does not accept unsolicited resumes.

Imagine coming to work every day with the tools and training you need to be successful and the confidence knowing you are working for the best. Voted a Top Place to Work by The Boston Globe consecutively! For over 35 years we have been committed to providing an exceptional client experience and we know that starts with our most valuable resource-our team members. Herb Chambers Honda of Burlington is currently looking for an Automotive Service Client Care Specialist to join our team! As a BDC/Client Care Specialist, you will handle inbound/outbound calls and appointment setting for our service customers. We are looking for someone comfortable with high volume calling, a “GO GETTER"" and a professional well-spoken candidate. If you have experience in customer service, telemarketing, retail, or sales then we encourage you to apply today! Previous dealership experience is a plus, but not required. Turn your talent into profit and apply today! What do we offer you Nationally recognized training and toolsMedical (HMO & PPO), vision, life & Dental401K Retirement Responsibilities: High volume of outbound and inbound phone callsCreating appointments for guests in our service departmentsLearning customers’ needs while building rapportCompleting follow-up tasks on daily activities, contact lists and campaignsDaily and Monthly performance reportingStrong phone, email, and communication skillsPositive attitude and high energy at all timesBasic MS Office knowledge; computer software and Internet proficiency

Experience York International's return to New England and New York Factory Direct Stores!Now hiring a Territory Manager / Outside Salesperson for the South of Boston Area to support our York Factory Direct Stores in Marlborough MA.Learn about York Factory Direct Stores: · The Northeast Region of York Factory Direct Stores span from Northern Virginia to New York City· York Factory Direct Stores are expanding into New England and Western New York. · York Factory Direct Stores offer the full lineup of York, Guardian, and Hitachi HVAC Products. · York FD stores provide high quality and expedient delivery of the company’s full line of residential and commercial HVAC ducted and ductless systems, Source One Parts, supplies and components.· York FD locations in New England will also offer the latest in HITACHIductless products including single and multi-split units, variable refrigerant flow systems, and air to water heat pumps. What you will do:This is a remote position but will require regular travel within the South of Boston territory.· You will represent one of the leading brands in the HVAC distribution channel for York Factory Direct promoting York & Hitachi’s portfolios in the assigned market. You will also become a member of a highly motivated, winning team, fostering an goal driven and positive culture.· You will be responsible for selling Residential and Commercial HVAC equipment, parts and supplies to HVAC contractors.· The selected candidate will develop partnerships with existing customers to increase share of wallet, while recruiting new customers into the York family to increase market share. You will represent a company proud to design, assemble and manufacture HVAC products in the USA..· Leadership coaching will be a constant throughout your career. Investing in our people is a high priority at York International. Your sales leaders will onboard you with all the programs, product and company information you need to succeed.· They will always be available to help answer questions and mentor you where they see fit or where improvements can be met. This is designed to make you the best sales professional in the industry so you can achieve all of your personal and professional goals!What we offer: · Competitive salary plus uncapped commission program· Paid vacation/personal days/holidays/sick time · Comprehensive benefits package including 401K, medical, dental, and vision care · Company Car plus Fuel Card · Laptop & Cellular Phone · On the job training opportunities · Encouraging and collaborative team environment What we look for:· Bachelor’s Degree or an equivalent combination of education and experience.· HVAC industry experience (required)· Minimum 3+ years of direct outside sales experience.· Must be able to use Microsoft Office and Salesforce.com.· Travel required to each customer within aligned market.· Self-motivated individuals with a high energy level and desire to achieve goals beyond what is required.· The right fit is driven to become #1 in the region and across the entire company!· High-performing sales individuals with an understanding of the sales process/cycle and knowledge of principles and methods for showing, promoting, and selling products or services. · Ability to utilize sales process to uncover customer objections/concerns and determine appropriate solutions, while maintaining a plan of action until desired results are achieved.· Understand the principles and processes for providing best-in-class customer service.· Exceed customer expectations with your level of service, knowledge, and response time.· Customer satisfaction is key to your success.· Ability to listen, gain trust and bring to closure an action, project, resolution, or sale with customers.· Business acumen including sales forecasting, opportunity management and customer planning.· Ability to understand and communicate in today’s technologically driven business environment.How you will do it:· Build relationships with existing customers while expanding growth year-over-year.· Discuss all the products and programs York Factory Direct offers to gain more share of wallet.· Teach and coach customers to utilize all program features available to grow their business; the more they sell, the more we sell!· Prospect and recruit customers who fit the York partnership profile. Prove “Why York” is an industry leader with the power behind it to grow their business.· Create custom marketing strategies to help your customers grow.· As needed, you will receive support from our market leaders and a marketing manager.· Assist your customer to select the best York products to meet their client’s needs.· This includes coaching them on their selling approach, product specifications/performance and application regulations which may vary by job.· Negotiate prices and terms of sale.· Ensure customers participate and attend our industry-leading training classes offered locally and virtually.· Our local service managers are best-in-class providing your customer a great resource to improve their quality in the field and increase consumer confidence as they build their business.· Perform to plan.· Set weekly, monthly, quarterly, and annual sales goals for overall sales, sales calls, product mix/segmentation, new dealer registrations, training, as well as many other sales metrics.York International is a subsidiary of Johnson Controls PLC

Overview: Driven by Excellence. Powered by SkillGroup1 Westwood Pre-Owned Center is a trusted name automotive service. We are known for our dedication to quality, customer satisfaction, and excellence in vehicle repair. Our Recon Center is growing, and we are looking for looking a mid-level Automotive Technician who wants to grow with our team!What We Offer:Salaried Position– up to $75,000.00 annual salary.State-of-the-Art Equipment– Work with the latest tools and technologyComprehensive Paid Training Programs to help you grow and succeedOutstanding Benefits Package:Health, Dental & Vision InsuranceLife & Disability Insurance401(k) with Company MatchPaid Time OffEmployee Vehicle Purchase ProgramWhat You’ll Do:Perform diagnostics and basic repairs on engines, transmissions, brakes, suspensions, and electrical systemsConduct routine maintenance services such as oil changes, tire rotations, and inspectionsTroubleshoot vehicle issues and provide detailed reports of findings and repairsUse diagnostic tools and equipment to support repair workFollow manufacturer guidelines and company procedures for all repairsMaintain clean, organized, and safe work environmentCommunicate effectively with our team regarding needed repairsQualifications:If you have proven mid-level automotive repair skills and want advance in your career as a technician and a leader, this may be the job for you!ASE Certifications a plusA positive, team-oriented attitude with a commitment to excellent workAbility to work in a fast-paced environmentTools based on your experienceStrong communication skills and basic computer skillsHigh school diploma or equivalentValid driver’s license with clean driving recordGroup 1 Automotive, a Fortune 250 company, is a leading operator of automotive dealerships and collision centers across the United States and United Kingdom.If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail.To learn more about our company, visit www.group1auto.com.Apply today or refer a qualified friend.*All applicants must pass pre-employment testing to include: background checks, and drug testing in order to qualify for employment*Group 1 Automotive is an Equal Employment Opportunity employer.#PRIIND1

Overview: Orthodontic Assistant Cortland Dental & Braces Must be DANB certified, Radiology certified, and CPR certifiedTravel between Roxbury and ChelseaMonday & Tuesday-RoxburyWednesday and Thursday- ChelseaHours are 8:45am-5pm with 1 hr unpaid lunchWork for a company that is truly making the world a happier place, one smile at a time! At Benevis, we create over a million smiles a year in the communities we serve and believe that every person deserves access to quality, affordable dental care. This mission drives everything we do. With over 3000 employees in offices across the country from clinical to support staff - we are united in our mission to create happy, healthy smiles through providing high quality dental care in a fun, compassionate environment. Are you ready to join us in creating our next million smiles We have JUST the opportunity for you.We are actively seeking an Orthodontic Assistant to join our team. Support our mission to providing excellent dental care in the community and help us create more smiles and memorable experiences. Join a team that believes in teamwork and truly cares about their patients. Find your opportunity to make an impact: Get out into your community -- participate in local events including school screenings, presentations and any opportunity to promote a positive image of us Participate in morning huddles (hey, even ask to run one!), let your peers know how much you appreciate them, highlight great examples of customer focus, collaboration etc. Love working with kids (they make up 70% or more of our patient base) Responsibilities: Deliver quality and compassionate care to every patient Guide parents and patients through our processes before treatment Educate patients in oral hygiene instruction and provide postoperative instruction Prepare patient for examination and treatment Take x-rays and save to patient charts Take quality orthodontic facial photos Responsible for the operational readiness Prepare tray set-ups for dental procedures Mix amalgam, cement, pulp paste and prepare impression materials Sterilize and disinfect instruments and equipment Clean chairs and rooms Assist professional dental staff with treatment Document patient information, treatment plans, and procedures in patient chart Pour, trim and polish impression casts Fabricate custom impression trays Perform to the highest integrity by adhering to all government regulations, company standards, and company compliance programs Other duties as assigned Qualifications: Orthodontic or Dental Assistant Certification (State dependent) Preferred at least 1 year of experience in Orthodontic Assisting CPR/BLS Certification Required Willing to travel in territory assigned to team High focus on customer service and satisfaction Must love working with children Compassion and high level of service for our patients, parents and staff Integrity, always doing the right thing Dependable, reliable to be at work when scheduled Attention to detail Able to organize work, engage in a variety of tasks simultaneously and consistently meet deadlines Professional manner and appearance at all times We Offer: Competitive compensation Monthly bonuses based on Office performance Comprehensive Benefits Package: Medical, Dental, Vision, 401K with match, flexible spending accounts, paid time off, company holidays and much more! We value teamwork, mutual respect and cooperation. We do not practice unlawful discrimination, including harassment or tolerate it in our workplace. What do we mean by discrimination We mean that we do not discriminate on the basis of race, color, creed, religion, sex, national origin, age, citizenship, disability, sexual orientation or any other characteristic protected by federal, state, or local law.

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services.Wecurrently have an Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on ST products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesInstalls intrusion, fire, CCTV, and access control security systems.Run electrical wiring in attics, crawl spaces, and other confined spaces, which can include drilling, trenching and aerial runs.Complete all wiring, connections, and equipment installations ensuring that security systems are complete and satisfy customer and contractual requirements.Assists and interfaces with the Installation Team Lead or Project Manager regarding on-site scheduling of work activities and timely delivery of equipment.Conducts tests to ensure all newly installed systems and component devices are operational.Troubleshoots new system installations to ensure proper functioning and to ensure system meets local, county, state, or federal codes; legal and/or insurance requirements.Presents a professional image both in personal and vehicle appearance.Performs work assignments in a safe manner and within specified cost limits.Promotes, builds, and maintains good customer relations and assists with contract retention.Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements.Keeps abreast of changes and new developments in products and technology. Attends and completes training programs as requestedMinimum Requirements MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems.High School Diploma or equivalentVocational/Technical Degree in electrical, security, or computer systems preferredNICET Certification preferredIP Video and IT experience preferredClimb ladders that extend up to 24 ft. in heightCarry items up to 75 poundsAbility to work on-call on a rotational basis covering after hours & weekend emergency calls.A valid state driver’s license, without restrictions, is required.Securitas offers comprehensive benefits including:Highly competitive salaryCompany VehicleCompany Cell PhoneOpportunity for annual merit pay increases.Paid company trainingMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salary and bonus planPaid vacation/holidays/sick timeComprehensive benefits package including 401K, medical, dental, and vision care - Available day oneExtensive product and on the job/cross training opportunities with outstanding internal resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us Out: Day in the Life of the Building of the Future https://youtu.be/pdZMNrDJviYWhat you will doOur Mechanical Engineer's responsibilities include but are not limited to: developing water-based fire protection products or system concepts and detailed designs, as directed; prototype generation and testing to international standards; conduct detailed studies to support design decisions; maintain records of design process in accordance with sound design practice and ISO requirements by performing duties directly or through subordinates when so directed.How you will do it:Analyzes product and equipment specifications to support decisions on initial design directionKeeps abreast of the company’s product offerings, within the area of involvement, to support decisions oninitial design directionMaintains a working knowledge of the company’s manufacturing operations to understand the strengths and weaknesses of design concepts from the point of view of manufacturability within the companyConducts feasibility, cost, optimization, stress, fluids, and thermal analysesProvides technical information concerning manufacturing and/or processing techniques, materials, properties, and process advantages and limitations which affect plant and product engineering planningKeeps abreast of the latest technology developments to ensure the company sees available opportunities for technical improvements in products and services and/or cost reductionsConfers with research personnel and other technical functions as required to clarify and resolve problems and develop designsMaintains a working knowledge of general industry and specific agency approval requirements, to ensurecompliance is maintained in designsPrepares and directs others in the preparation of design layouts, detailed drawings, and specificationsDirects and coordinates prototype effortsCompiles and analyzes operational, test, and research data to establish and/or evaluate performance standards and limits for new or existing productsPlans, develops, conducts and oversees experimental test programsPlans and holds meetings when appropriatePrepares and presents reports and presentations as neededPerforms all elements of the job in accordance with established procedures.What we look for:RequiredBachelor’s Degree from an accredited university and 5-10 years’ experience in mechanical engineering, fire protection engineering, or a related technical subject areaSelf-directed; able to strategize on test plans without established protocols; strong on-time and quality project deliveryAble to apply fundamental engineering theories, mathematics, mechanics, and physical science concepts to the jobDemonstrated ability to work in a team environment, good written and oral communications skills, flexibility, and adaptability to changing situationsAbility to write reports and convey detailed technical informationHigh attention to detail and solid organizational skill#LI-MJ1#LI-Onsite

Overview: Automotive Flat Rate Technician/Mechanic – Ira Volvo Cars South ShoreJoin a Fast-Growing Team at Group 1 AutomotiveIra Volvo Cars South Shore, part of the rapidly growing Group 1 Automotive family, is looking for Automotive Flat Rate Technicians/Mechanics to join our quality dealership team. Representing a premium brand, we are committed to delivering exceptional service. Our technicians take pride in their work, have a passion for automotive repair, and enjoy being part of a winning team that values its employees.We Offer:Market-leading payFlexible work schedule to accommodate a healthy work-life balanceA great working environment with the latest equipmentStructured, self-paced, and paid training opportunities leading to manufacturer and Group 1 recognitionHealth, dental, and vision insuranceLife and disability insurance401(k) with company matchPaid time-offEmployee vehicle purchase programEmployee stock purchase planPinnacle Awards ProgramYou Need:Automotive technician/mechanic experienceA love for everything automotiveA positive and friendly attitudeTools based on your experienceStrong communication skillsBasic computer skillsA strong desire to provide an exceptional client experienceThe ability to achieve targeted goalsHigh school diploma or equivalentA valid driver’s licenseGroup 1 Automotive, a Fortune 250 company, is a leading operator of automotive dealerships and collision centers across the United States and United Kingdom.If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail.To learn more about our company, visit www.group1auto.com. Apply today or refer a qualified friend.Additional Information:All applicants must pass pre-employment testing, including background checks and MVR, to qualify for employment.Group 1 Automotive is an Equal Employment Opportunity Employer.IND1#PRI

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services.Wecurrently have an Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on ST products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesInstalls intrusion, fire, CCTV, and access control security systems.Run electrical wiring in attics, crawl spaces, and other confined spaces, which can include drilling, trenching and aerial runs.Complete all wiring, connections, and equipment installations ensuring that security systems are complete and satisfy customer and contractual requirements.Assists and interfaces with the Installation Team Lead or Project Manager regarding on-site scheduling of work activities and timely delivery of equipment.Conducts tests to ensure all newly installed systems and component devices are operational.Troubleshoots new system installations to ensure proper functioning and to ensure system meets local, county, state, or federal codes; legal and/or insurance requirements.Presents a professional image both in personal and vehicle appearance.Performs work assignments in a safe manner and within specified cost limits.Promotes, builds, and maintains good customer relations and assists with contract retention.Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements.Keeps abreast of changes and new developments in products and technology. Attends and completes training programs as requestedMinimum Requirements MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems.High School Diploma or equivalentVocational/Technical Degree in electrical, security, or computer systems preferredNICET Certification preferredIP Video and IT experience preferredClimb ladders that extend up to 24 ft. in heightCarry items up to 75 poundsAbility to work on-call on a rotational basis covering after hours & weekend emergency calls.A valid state driver’s license, without restrictions, is required.Securitas offers comprehensive benefits including:Highly competitive salaryCompany VehicleCompany Cell PhoneOpportunity for annual merit pay increases.Paid company trainingMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

What will you doThis Product Manager is responsible for the overall growth of the Special Application Sprinklers and Pre-Fab global product segments within Fire Suppression, Water & Mechanical. Major responsibilities include driving profitable revenue growth through the development of multi-generational product road maps and robust product lifecycle plans spanning idea inception to new product introduction and obsolescence activities. Product strategy development and execution of customer facing digital tools are also core responsibilities. This individual will also oversee cost-out / value engineering initiatives and gather customer and market insights.Significant global, cross functional collaboration is required across the organization, including global sales, engineering, manufacturing, sourcing, and other functions. This position reports to the Senior Director, Product Management.How you will do itProduct Market Insight:· Assesses the market, product trends & voice of customer information.· Conducts sizing & segmentation of markets· Conducts regular competitive & regulatory research and analysis on product line.Product Strategy:· Develops the product line strategy based on all relevant data and insights.· Determines the value propositions of individual products in the product line.· Communicates the strategy, value prop, and pricing guidelines plus gains alignment with the greater organization.Development:· Defines the product line roadmap.· Develops new product concepts in existing and new markets / channels buy following a multi-stage-gate process and by running multi-stakeholder development teams.· Defines product requirements including cost, quality, and timing targets.· Delivers detailed business cases for new products / enhancements.· Defines strategy and roadmap for customer tools and growth programsLifecycle Management:· Leads cross functional team through product lifecycle process including introductions, product line analysis, value assessment and SKU rationalization activities.· Understands product portfolio at a global level (SKUs, pricing, profitability, sales by customer / channel, quality, warranty)· Analyze sales trends and communicate with end customers on market and product updates.· Interface with end-users, sales, engineering, marketing, and operationsWhat we look for:Required:· Four (4) year degree in business or an engineering field· Minimum of 5+ years business experience, with at least two plus years in a product development role· Demonstrated success in a product development role, in a phased-gate process experience· Comfort and experience in interacting with external customers· Experience working in a matrix business structure and working collaboratively with multiple functions on joint programs· Excellent written & verbal English communication skills· Strong financial and general business acumen· Ability to travel to customer sites 10-20% of time.Preferred:· Previous experience within a fire protection, fire service or infrastructure related industry· MBA a plus· Proven ability to drive results via disciplined execution amidst organizational ambiguity

Overview: MARKET LEADING PAY, PLUS BONUSESIra Volvo Cars South Shoreis part of the fast growing Group 1 Automotive, a leader in automotive retail and service.We are growing and looking for Automotive Service Technicians/Mechanics to work with our Quality Dealership representing a Quality Product.We offer:Market Leading Pay, Based on Experience, Plus BonusesA Great Working Environment with the Latest EquipmentStructured, Self-paced and Paid Training Opportunities Leading to Manufacturer and Group 1 RecognitionHealth, Dental & Vision Insurance Life and Disability Insurance401(k) with company matchPaid Time-offEmployee Vehicle Purchase ProgramEmployee Stock Purchase PlanPinnacle Awards ProgramYou needExperience as an Automotive Technician/MechanicA Love of Everything AutomotiveA Positive & Friendly AttitudeTools Based on your ExperienceCommunication SkillsBasic Computer SkillsStrong Desire to Provide an Exceptional Client ExperienceAbility to Achieve Targeted GoalsHigh School Diploma or EquivalentMust have a Valid Driver’s License*All applicants must pass pre-employment testing to include: background checks, MVR, and drug testing in order to qualify for employment*Group 1 Automotive, a Fortune 250 company, is a leading operator of automotive dealerships and collision centers across the United States and United Kingdom.If you are in alignment with our values of integrity, transparency, professionalism, teamwork and respect - now might be the time for you to accelerate your career as part of the best company in automotive retail.To learn more about our company, visit www.group1auto.com. Apply today or refer a qualified friend.Group 1 Automotive is an Equal Employment Opportunity employer.IND1#PRI

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services.Wecurrently have an Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on ST products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesInstalls intrusion, fire, CCTV, and access control security systems.Run electrical wiring in attics, crawl spaces, and other confined spaces, which can include drilling, trenching and aerial runs.Complete all wiring, connections, and equipment installations ensuring that security systems are complete and satisfy customer and contractual requirements.Assists and interfaces with the Installation Team Lead or Project Manager regarding on-site scheduling of work activities and timely delivery of equipment.Conducts tests to ensure all newly installed systems and component devices are operational.Troubleshoots new system installations to ensure proper functioning and to ensure system meets local, county, state, or federal codes; legal and/or insurance requirements.Presents a professional image both in personal and vehicle appearance.Performs work assignments in a safe manner and within specified cost limits.Promotes, builds, and maintains good customer relations and assists with contract retention.Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements.Keeps abreast of changes and new developments in products and technology. Attends and completes training programs as requestedMinimum Requirements MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems.High School Diploma or equivalentVocational/Technical Degree in electrical, security, or computer systems preferredNICET Certification preferredIP Video and IT experience preferredClimb ladders that extend up to 24 ft. in heightCarry items up to 75 poundsAbility to work on-call on a rotational basis covering after hours & weekend emergency calls.A valid state driver’s license, without restrictions, is required.Securitas offers comprehensive benefits including:Highly competitive salaryCompany VehicleCompany Cell PhoneOpportunity for annual merit pay increases.Paid company trainingMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

***Consideration given to applicants residing in or within a commutable distance from Cranston, RI***Build your best future with the Johnson Controls team!Who We Are:Johnson Controls - Fire Suppression Products (FSP) is a global leader in fire and life safety. We provide fire detection, sprinkler, suppression, special-hazard, and emergency communications solutions to customers in countries spanning six continents. With more than 30 manufacturing facilities worldwide, we provide safety and security for millions of customers around the world every day. Plus, we offer a comprehensive array of testing, inspection, maintenance, and repair services to keep fire and life-safety systems in top working order.What We Offer:Competitive salaryPaid vacation/holidays/sicktime - 15 days of vacation first year!Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one!Extensive product and on the job/cross training opportunitiesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyWhat You Will Do:Johnson Controls is seeking a hands-on Mechanical Engineer to join our Water-Based Fire Suppression New Product Introduction (NPI) team at our R&D facility in Cranston, RI. At Cranston’s R&D Center our engineering teams are responsible for the design, development, and certification of fire protection products which aid in life safety and property loss mitigation. This position is not eligible for Visa sponsorship.How You Will Do It:Our Mechanical Engineers' responsibilities include but are not limited to develop water-based fire protection product or system concepts and detailed designs, as advised; prototype generation and testing to international standards; conduct detailed studies to support design decisions; maintain records of design process in accordance with sound design practice and ISO requirements by performing duties directly or through subordinates when so directed.Analyzes product and equipment specifications to support decisions on initial design direction.Stays on top of the company’s product offerings, within the area of involvement, to support decisions oninitial design direction.Maintains a solid understanding of the company’s manufacturing operations to understand the strengths and weaknesses of design concepts from the point of view of manufacturability within the company.Conducts feasibility, cost, optimization, stress, fluids, and thermal analyses.Provides technical information concerning manufacturing and/or processing techniques, materials, properties, and process advantages and limitations which affect plant and product engineering planning.Keeps tabs on the newest technology developments to ensure the company sees available opportunities for technical improvements in products and services and/or cost reductions.Confers with research personnel and other technical functions as the need arises to clarify and resolve problems and develop designs.Maintains a solid understanding of general industry and specific agency approval requirements, to ensurecomplianceis maintained in designs.Prepares and advises others in the preparation of design layouts, detailed drawings, and specifications.Advises and coordinates prototype efforts.Compiles and analyzes operational, test, and research data to establish and/or evaluate performance standards and limits for new or existing products.Plans, develops, conducts, and coordinates experimental test programs.Plans and holds meetings when appropriate.Prepares and presents reports and presentations as needed.Performs all elements of the job in accordance with established procedures.What We Look For:RequiredBachelor's degree in Mechanical Engineering or a related field.Minimum of 5-8 years of experience in mechanical engineeringExperience with industry standards and codes, such as NFPA, UL, and FM.Strong knowledge of fluid dynamics, thermodynamics, and material science.Excellent problem-solving skills and attention to detail.Strong communication and interpersonal skills.Ability to manage multiple projects and meet deadlines.PreferredBackground with focus on fire suppression productsProficiency in CAD software (e.g., AutoCAD, SolidWorks) and engineering analysis tools.#mechanicalengineer#agencytesting#newproductintroduction#hiring

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services.Wecurrently have an Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on ST products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.ResponsibilitiesInstalls intrusion, fire, CCTV, and access control security systems.Run electrical wiring in attics, crawl spaces, and other confined spaces, which can include drilling, trenching and aerial runs.Complete all wiring, connections, and equipment installations ensuring that security systems are complete and satisfy customer and contractual requirements.Assists and interfaces with the Installation Team Lead or Project Manager regarding on-site scheduling of work activities and timely delivery of equipment.Conducts tests to ensure all newly installed systems and component devices are operational.Troubleshoots new system installations to ensure proper functioning and to ensure system meets local, county, state, or federal codes; legal and/or insurance requirements.Presents a professional image both in personal and vehicle appearance.Performs work assignments in a safe manner and within specified cost limits.Promotes, builds, and maintains good customer relations and assists with contract retention.Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements.Keeps abreast of changes and new developments in products and technology. Attends and completes training programs as requestedMinimum Requirements MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems.High School Diploma or equivalentVocational/Technical Degree in electrical, security, or computer systems preferredNICET Certification preferredIP Video and IT experience preferredClimb ladders that extend up to 24 ft. in heightCarry items up to 75 poundsAbility to work on-call on a rotational basis covering after hours & weekend emergency calls.A valid state driver’s license, without restrictions, is required.Securitas offers comprehensive benefits including:Highly competitive salaryCompany VehicleCompany Cell PhoneOpportunity for annual merit pay increases.Paid company trainingMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Build your best future with the Johnson Controls teamAs a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide.You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing.Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard – your next great opportunity is just a few clicks away!What we offerCompetitive salaryPaid vacation/holidays/sick time - 15 days (about 2 weeks) of vacation first yearComprehensive benefits package including 401K, medical, dental, and vision care - Available day oneExtensive product and on the job/cross training opportunities with outstanding resourcesEncouraging and collaborative team environmentDedication to safety through our Zero Harm policyCheck us out! A Day in the Life at JCIWhat you will doUnder general direction, responsible for the design, configuration, and operation of complete building control systems including fire, security, and other low voltage control sub-systems (i.e., lighting, nurse call, data networks, etc.) to meet the intent of the project requirements.Accountable to field teams for quality, timeliness and efficiency of designs. Develops complex software programs, commissioning and solving to ensure proper operations of the building control system.Provides detailed information and submittals to communicate design and operation to customers, consultants, Johnson Controls field installation team and subcontractors.How you will do itDesigns and configures technically complex building control systems as defined by the contract documents.Creates flow diagrams, sequence of operations, bill of material, network layouts and electrical schematics as required.Develops and tests software programs necessary to operate the system per the project requirements' intent.Coordinates and creates necessary drawings and equipment schedules for submittals and installation.Selects, orders, and tracks the delivery of materials for assigned projects.Coordinates factory-mounting processes to meet factory and project schedule.Assists in the loading and commissioning of all system and network-level controllers as required.Assists in validation of complete system functionality and solves problems with subcontractors and other trades to ensure proper operation.Provides field change information to the project team for the creation of as-built drawings and software.Keeps management and JCI contractor or customer informed of job progress and issues.Assists in performing site-specific training for owner/operator on the total building control system.Participates in release meeting with project field team.Performs value engineering to provide cost effective results while maintaining customer satisfaction.May provide work direction to Systems Design Assistants.Adheres to safety standards with a high degree of employee and subcontractor safety.Travel is required for this role.What we look forRequiredBachelor’s degree in engineering and minimum 3 years' experience·Demonstrated knowledge of the construction or HVAC industry.Demonstrated knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems.Experience with JCI software programmingDemonstrated experience in the integration of low voltage building sub-systems using various industry protocols (i.e., LON, BACnet, etc.).Ability to relate technical knowledge to a non-technical audience.Demonstrated advanced computer skills required, particularly computer-related drafting tools.Ability to travel regularly.#LI-Hybrid#LI-KP1

Do you have HVAC experience We are looking for HVAC journeyman who has worked in heavy commercial markets to join our team to work with the most advanced heavy commercial and industrial cutting-edge equipment.We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Union Journeyman must be skilled craftsmen in their trade, and we prefer a minimum of five (5) years actual, practical working experience in the HVAC plumbing, pipefitting and/or mechanical equipment service industry.You may be required to pass a satisfactory examination as to your special skill.Massachusetts Refrigeration License is RequiredWhat you will do:We are looking for a skilled HVAC systems Journeyman who has worked in heavy commercial markets to join our team to work the most advanced heavy commercial and industrial cutting-edge equipment.How will you do it:We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety.We will equip you with tools and a vehicle to perform your job at the highest standard.May be required to satisfactorily pass an examination to identify special skills.Scope of work shall be limited to commercial HVACR service.The repair of centrifugal, steam turbines, and absorption machines, open-drive screw chillers and ammonia systems.Perform maintenance, repair and replacement services on commercial heating and cooling systems.What we look for:RequiredMassachusetts Refrigeration License is Required and preferably candidate who is already in the Local Union (Boston 537).High School Diploma or equivalent.Five (5) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry.Ability to commit to a 30-Hour OSHA Certification which is to be done after hours and weekends is required upon hireComputer savvy with good verbal and written communication skills.PreferredPreferably candidate who is already in the Local Union (Boston 537).Five (5) years of Commercial and or industrial work experience in the HVAC industryEPA Universal Refrigerant Certification*This is a Bargaining Unit Position.#TechHiring

Do you have HVAC experience We are looking for HVAC journeyman who has worked in heavy commercial markets to join our team to work with the most advanced heavy commercial and industrial cutting-edge equipment.We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Union Journeyman must be skilled craftsmen in their trade, and we prefer a minimum of five (5) years actual, practical working experience in the HVAC plumbing, pipefitting and/or mechanical equipment service industry.You may be required to pass a satisfactory examination as to your special skill.Massachusetts Refrigeration License is Required*****Sign On Bonus Available****What you will do:We are looking for a skilled HVAC systems Journeyman who has worked in heavy commercial markets to join our team to work the most advanced heavy commercial and industrial cutting-edge equipment.How will you do it:We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety.We will equip you with tools and a vehicle to perform your job at the highest standard.May be required to satisfactorily pass an examination to identify special skills.Scope of work shall be limited to commercial HVACR service.The repair of centrifugal, steam turbines, and absorption machines, open-drive screw chillers and ammonia systems.Perform maintenance, repair and replacement services on commercial heating and cooling systems.What we look for:RequiredMassachusetts Refrigeration License is Required and preferably candidate who is already in the Local Union (Boston 537).High School Diploma or equivalent.Five (5) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry.Ability to commit to a 30-Hour OSHA Certification which is to be done after hours and weekends is required upon hireComputer savvy with good verbal and written communication skills.PreferredPreferably candidate who is already in the Local Union (Boston 537).Five (5) years of Commercial and or industrial work experience in the HVAC industryEPA Universal Refrigerant Certification*This is a Bargaining Unit Position.#TechHiring

**** Must be a member or willing to join a local Union****What you will do:Johnson Controls Inc. is looking for forward-thinking talent to join our organization to support the fast-growing HVAC business in North America.During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the chance to work on light commercial and/or heavy commercial teams with the most advanced heavy commercial and cutting-edge industrial equipment. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.How will you do it:We are looking for skilled HVAC Mechanics who have practical work experience in their trade, (HVAC piping, plumbing, pipefitting and /or mechanical equipment service industry). Mechanics must have practical working experience in light commercial or commercial mechanical equipment. May be required to satisfactorily pass an examination to identify special skills. Scope of work shall be limited to commercial HVACR service. Servicemen may partner with Journeymen in the repair of centrifugal, steam turbines, and open-drive screw chillers. Perform maintenance, repair and replacement services on commercial heating and cooling systems.We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look for:RequiredBe a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business.Must be a member or willing to join a local Union. Minimum of Three (3) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry. This includes Rooftop units, pumps, fans, towers, boilers, chillers, compressors, plumbing.Mechanical shaft alignment using dial indicators, etc. of pumps, fans, Compressors.Able to use vibration equipment to trouble shoot drivelines.Travel maybe required 10% to 20% to support Branch Customers activities, trouble shooting, installation and repair.You will be required to pass a knowledge examination to assess proficiencies.Opportunity to invest in career development. You will enroll in training programs to gain knowledge in HVAC products and sales quoting.You will work with other local market mechanics as well as Servicemen and apprentices.Attention to detail through interpersonal, digital, and written skills.Able to write and communicate to the customer problem, cause, and corrective actions.Able to provide quotes to customers and participate in JCI’s Service Plus Rewards program.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all formsUniversal EPA refrigerants license, applicable state or local licensing, and valid driver's license#TechHiring

Do you have HVAC experience We are looking for HVAC journeyman who has worked in heavy commercial markets to join our team to work with the most advanced heavy commercial and industrial cutting-edge equipment.We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety. We will equip you with tools and a vehicle to perform your job at the highest standard.Union Journeyman must be skilled craftsmen in their trade, and we prefer a minimum of five (5) years actual, practical working experience in the HVAC plumbing, pipefitting and/or mechanical equipment service industry.You may be required to pass a satisfactory examination as to your special skill.Massachusetts Refrigeration License is RequiredWhat you will do:We are looking for a skilled HVAC systems Journeyman who has worked in heavy commercial markets to join our team to work the most advanced heavy commercial and industrial cutting-edge equipment.How will you do it:We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety.We will equip you with tools and a vehicle to perform your job at the highest standard.May be required to satisfactorily pass an examination to identify special skills.Scope of work shall be limited to commercial HVACR service.The repair of centrifugal, steam turbines, and absorption machines, open-drive screw chillers and ammonia systems.Perform maintenance, repair and replacement services on commercial heating and cooling systems.What we look for:RequiredMassachusetts Refrigeration License is Required and preferably candidate who is already in the Local Union (Boston 537).High School Diploma or equivalent.Five (5) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry.Ability to commit to a 30-Hour OSHA Certification which is to be done after hours and weekends is required upon hireComputer savvy with good verbal and written communication skills.PreferredPreferably candidate who is already in the Local Union (Boston 537).Five (5) years of Commercial and or industrial work experience in the HVAC industryEPA Universal Refrigerant Certification*This is a Bargaining Unit Position.#TechHiring

Massachusetts Refrigeration License is RequiredUnleash your potential with the Johnson Controls team!As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet.Join our winning team and pave the way for a bright future.With our extensive reach across various industries worldwide, our teams are uniquely positioned to support and empower you. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing.Join the Johnson Controls family and thrive in a culture that values your voice and ideas.Your next incredible opportunity is just a few clicks away!Here's what we have to offer:Competitive PayPaid vacation, holidays, and sick time.Comprehensive benefits package, including 401K, medical, dental, and vision care - available from day one.Extensive product and on-the-job/cross-training opportunities, supported by our outstanding internal resources.Encouraging and collaborative team environment.Dedication to safety through our Zero Harm policy.JCI Employee discount programs (The Loop by Perk Spot).Check us out: A Day in the Life of the Building of the Future - https://youtu.be/pdZMNrDJviY]What you will do:We are looking for a skilled HVAC systems Journeyman who has worked in heavy commercial markets to join our team to work the most advanced heavy commercial and industrial cutting-edge equipment.How you will do it:We provide factory certification through our Service Technical Academy (STA) with milestone recognition and monetary rewards and advancement, increased incentive opportunity for executed pull-through work, top of the line technology, equipment, and uniforms and a #1 focus on employee safety.We will equip you with tools and a vehicle to perform your job at the highest standard.May be required to satisfactorily pass an examination to identify special skills.Scope of work shall be limited to commercial HVACR service.The repair of centrifugal, steam turbines, and absorption machines, open-drive screw chillers and ammonia systems.Perform maintenance, repair and replacement services on commercial heating and cooling systems.What we look for:RequiredMassachusetts Refrigeration License is Required and preferably candidate who is already in the Local Union (Boston 537).High School Diploma or equivalent.Five (5) years Commercial and/or industrial, mechanical troubleshooting experience in the HVAC industry.Ability to commit to a 30-Hour OSHA Certification which is to be done after hours and weekends is required upon hireComputer savvy with good verbal and written communication skills.PreferredPreferably candidate who is already in the Local Union (Boston 537).Five (5) years of Commercial and or industrial work experience in the HVAC industryEPA Universal Refrigerant Certification*This is a Bargaining Unit Position.#TechHiringJCI employees are valued members of the Johnson Controls family. They are dedicated, skilled, and passionate individuals who contribute to the success and growth of our company. We prioritize creating a positive and inclusive work environment that fosters collaboration, innovation, and personal development. Our employees are encouraged to voice their ideas and opinions, knowing that they will be heard and valued. We believe in investing in our employees' well-being, providing competitive salaries, comprehensive benefits packages, and opportunities for career advancement. With a strong emphasis on safety and a commitment to sustainability, JCI employees play a crucial role in shaping a smarter, healthier, and more sustainable future for buildings and communities worldwide.