Orlando, FL • (28.9 miles) • Full Time • 9/12/2026

With platforms in HVAC and Detection and Measurement, SPX Technologies builds innovative solutions that enable a safer, more efficient, sustainable world. Through our RiSE talent development framework, we Reach, Identify, Strengthen, and Engage our employees to support them in their continued development. We’re a global company of problem solvers, collaborators, and innovators, and our businesses build solutions that impact the world. As part of Detection and Measurement, CUES is the world’s leading developer of water, wastewater, and storm water inspection equipment. With CCTV cameras, pre-built vehicles, and software for pipeline inspection and rehabilitation, we improve the safety and reliability of our water infrastructure systems.How you will make an Impact (Job Summary)SPX is a diver

Zephyrhills, FL 33541 • (44.2 miles) • Full Time • 9/8/2026

About the Role:Pasco Turf & Tractor LLC / Carts Unlimited is looking for a skilled Golf Mechanic to join our team in Zephyrhills, FL! If you have a passion for keeping golf carts running at peak performance, this is your chance to turn that passion into a career with a company that values your expertise.Responsibilities:Diagnose, repair, and golf carts (gas and electric)Perform routine preventative maintenance, inspections, and tune-upsTroubleshoot mechanical, electrical, and hydraulic system issuesRepair or replace defective parts, components, and assembliesTest equipment after repairs to ensure proper performance and safetyMaintain a clean, organized, and safe work environment in the shopDocument service records and communicate repair status with customers and team membersRequirements:Mi

Dade City, FL • (36.9 miles) • Full Time • 9/5/2026

We do on-site pump repair, maintenance, and new pump installations. Install water treatment filters and softeners.Pump mechanics troubleshoot and perform repairs on submersible, centrifugal, and above groundpumps. We need a reliable individual committed to maintaining our high standards of service and quality. All tools are provided. This is a full-time permanent position. Health insurance and vacation are offered after 90 days.\nCompany DescriptionWe repair and install new well water pumps, tanks, and water treatment systems. We also install and service septic pumps and repair septic systems.Company DescriptionWe repair and install new well water pumps, tanks, and water treatment systems. We also install and service septic pumps and repair septic systems.

Haines City, FL 33844 • (43.8 miles) • Full Time • 9/3/2026

Sun Orchard is the undisputed market leader in not-from-concentrate citrus ingredients and refreshments. We are looking for an experienced Production Supervisor to join our team!The Production Supervisor Responsible for the execution of production plans, including blending, pasteurization, bottling and packaging, meeting product specifications, quality standards, yield and efficiency targets while developing effective and motivated teams.What We OfferPaid time off, sick timeCompetitive PayComprehensive benefits including medical, dental, and vision, company paid life, flexible spending account, 401 matchingConsistent schedules and professional growth opportunitiesA respectful, forward-thinking work cultureAbout the Role:At the start of the shift, using the bottling production plan, develop

Zephyrhills, FL • (42 miles) • Full Time • 8/26/2026

We are looking for a skilled Wiring Harness Assembler/Cable Assembler full time/part time position available, who can read drawings, schematics, knows soldering and follow them with precision is extremely important.ResponsibilitiesRead and comprehend instructions and follow established proceduresCollect all material and equipment needed to begin the processCheck output to ensure highest qualityMaintain equipment in good conditionKeep records of production quantities and timeReport on issues, malfunction or defective partsSkillsProven experience as assemblerTechnical knowledge and ability to read blueprints, drawings etc.Ability in using tools (e.g. clamps) and machines (e.g. presses)Good understanding of quality control principlesGood communication skills (verbal and written)Excellent hand

Orlando, FL • (28.9 miles) • Full Time • 9/13/2026

JOB TITLE: Visual Quality Inspector (7am -3pm)REPORTS TO: Quality Control ManagerPAY TYPE: HourlySUMMARY:Perform final visual inspections on all outgoing metal parts to be shipped to the customer with a goal to prevent any non-conforming product from being sent to the customer.ESSENTIAL DUTIES AND RESPONSIBILITIES (include but are not limited to): Visually inspect metalparts to ensure conformance to the customer’s specifications through the identification of burrs, dings and foreign objects.Identify, label and move all nonconforming parts to the reject area or the appropriate non-conformance area.Make sure all parts are correctly labeled throughout the entire inspection process.Record final inspection activities in the company software.Package parts into boxes for shipping to the customer.

Sanford, FL 32771 • (26.4 miles) • Full Time • 9/13/2026

This is a unique product and process we perform and we encourage you to take a quick look at our website to understand what we do and make sure you are interested before you apply!https://engineeredgroup.com/Engineered Group is hiring a Skilled Craftsman with a background in carpentry or construction. We're looking for someone who takes pride in high-quality craftsmanship and is excited to work with innovative materials like architectural finishes, decorative glass films, vinyl faux wood, and sun control solutions. In this role, you’ll install custom graphics and surface treatments on walls, ceilings, beams, and moretransforming ordinary spaces into standout designs. If you're detail-oriented, comfortable with measurements and basic calculations, and enjoy hands-on work, we’d love to hear

Ocala, FL 34478 • (41.2 miles) • Full Time • 9/12/2026

Benefits/PerksCompetitive CompensationGreat Work EnvironmentCareer Advancement OpportunitiesJob SummaryIN NEED OF EXPERIENCED GRADER AND EXPERIENCED LOADER AND EXCAVATOR OPERATOR FOR LAND CLEARING. We are seeking a Heavy Machine Operator to join our team! As a Heavy Machine Operator, you will work behind the wheel operating a variety of heavy machinery and equipment, following all safety guidelines and job specifications to ensure projects are completed both safely and on time. You will also perform and record regular maintenance for your equipment, report any defects or issues immediately, and keep equipment in good, clean working order. The ideal candidate has all the necessary licensing to operate heavy machinery, works well in a team environment, and maintains the highest safety standa

Kissimmee, FL • (33.9 miles) • Full Time • 9/12/2026

Tetrasolv is an environmental company purifying drinking and industrial water in Texas and across North America. We are growing rapidly with many opportunities for the right people.**Overview:**We are seeking a skilled Service Technician to join our team. The ideal candidate will have experience in driving non cdl trucks, ability to operate a forklift and industrial vacuum operations.**Responsibilities:**- Operate forklift to move inventory and load trucks- Operate Vacuum to remove filter media and package into bulk bags- Travel to jobsites to perform same duties at our customer locations.- Drive company truck to service locations- Travel 30% of the time. All travel expenses paid and personnel are paid while traveling. The out of town jobs are lucrative for our team members.**Qualification

Winter Park, FL • (24.8 miles) • Full Time • 9/11/2026

Job description:>>YMT is an AS9100D / ISO 9001 certified machine and fabrication shop serving aerospaceand DoD customers. We run 3-axis and 5-axis CNC milling, turning, finishing, customweldments, electrical enclosures, tube bending, and powder coating. As a CMMC Level 2shop, we hold ourselves to a high standard and we need a machinist who can match it.>>You'll take released G-code, tooling, and stock, and turn it into a running, verified setup reliably, multiple times a day. Specifically:• Set, install, and touch off tooling for 3-axis and 5-axis mill jobs• Pull or saw-cut stock as needed• Run the first part while closely watching for anomalies heavy cuts, chatter,unusual sounds and react before they become a problem• Review released G-code before and during the run, fine-tuning at the ma

Sanford, FL • (28.4 miles) • Full Time • 9/11/2026

WindowWorld is the Nation's largest & leading window & door replacement Company.I'm looking for a Service Tech to service warranty related stops, appointments that include window/door service warranty work. Such as replacing window balancers, latches, locks, rescreening & window sash replacement.Training will be provided, but I am looking to identify a candidate with window/door experience.The position is full time work, good hourly rate, Holiday pay, we provide a Service van/Co. Vehicle & gas card for work purposes.Our Organization has been in business 26 years & still growing.If you're interested please apply as this position will be filled quickly!Thank you for your time!\nCompany Description-Operate with honesty & integrity at all times-Family environment-Great commissions/compensation

Windermere, FL • (18.3 miles) • Full Time • 9/11/2026

Manufacturing EngineerLocation: Orlando, FLJob ID: #73166 Duration: 12 months contractPay Range: $45-53 - W2 hourlySchedule: 4X10 D (Thursday through Sunday ON | Monday through Wednesday OFF)Potential to convert to full-time positionJob Description: We are seeking a talented and motivated Manufacturing Engineer to join our dynamic Machining Operations Center/Manufacturing Engineering Team. As part of this collaborative team, you will contribute to the creation and continuous improvement of special processes and small parts assembly for ultraprecision machined components. Your work will involve driving technology and automation into these operations.What You Will Be Doing: As the Manufacturing Engineer, you will be responsible for supporting the Machining Operations Center (MOC) within the

Sanford, FL 32771 • (26.4 miles) • Full Time • 9/11/2026

Produces components by assembling parts and subassemblies.Reads and deciphers assembly instructions.Positions or aligns components and parts with hand tools to assemble parts, examining connections for correct fit.Conducts quality control checks.Assembles components by examining connections for correct fitMaintains a clean working environment by complying with procedures, rules, and regulations.Maintains inventory by checking stock to determine supply levels and notifying the inventory clerk of low levels.Conserves resources by using equipment and supplies as needed to accomplish job results.Documents actions by completing production and quality forms.Strictly follows all personal protection equipment (PPE) requirements and safety procedures.Assembler Skills/Qualifications:Mechanical and t

Orlando, FL 32809 • (27.1 miles) • Full Time • 9/11/2026

Job Summary: The Quality Inspector is responsible for performing inspections of sewn parachute assemblies and related textile products to ensure compliance with customer specifications, engineering drawings, work instructions, military standards, FAA requirements (when applicable), and Paradigm quality requirements.Reporting Relationship:The Quality Inspector reports directly to the Quality Manager.Duties/Responsibilities:• Perform detailed final inspections of completed parachute assemblies and related sewn products.• Inspect stitch quality, seam integrity, thread, bartacks, material defects, hardware installation, orientation, and workmanship.• Verify compliance with drawings, specifications, work instructions, and travelers.• Perform dimensional inspections using appropriate measuring d

Orlando, FL 32827 • (33.7 miles) • Full Time • 9/11/2026

Divesting Agent - SupervisorResponsible for providing front-line leadership and operational support to Divesting Agents assigned to security screening checkpoints at Orlando International Airport (MCO).In addition to performing the essential duties of a Divesting Agent, the Supervisor assists management with daily staffing assignments, employee coverage, break and lunch relief, assignment rotation, communication with TSA personnel, and maintaining efficient checkpoint operations.The Divesting Agent – Supervisor serves as an important liaison between Divesting Agents, TSA personnel, and SEAS management. This position requires strong leadership, communication, judgment, professionalism, and the ability to remain calm and effective in a fast-paced airport environment.The Supervisor is expecte

Webster, FL 33597 • (24.7 miles) • Full Time • 9/9/2026

Fine Line Machine LLC is a precision manufacturing company established in 2021, based in Webster Florida. Offering precision CNC machining services for single part prototypes to mid-volume production runs for the Aerospace and Defense Industry. In addition to CNC manufacturing we offer Engineering and assembly services to allow us to provide complete mechanical assemblies to our customers.Job SummaryCNC Operator/Setup Machinist is expected to set up and operate CNC Machining centers in a low-volume/high-mix workflow.Fine Line Machine is a climate controlled facility.Schedule is 2ND Shift, Monday-Thursday 4:30PM-3:00AM - Schedules are subject to change.ResponsibilitiesSetup, and operation of the following machinesDoosan DNM5700 – 3-Axis CNC Mill - Fanuc IHMI ControlDoosan DNM5700L – 4-Axis

Winter Springs, FL 32708 • (28.1 miles) • Full Time • 9/8/2026

ITI Engineering is an award-winning supplier of software, hardware, engineering services and products in the aerospace defense industry. ITI designs and manufactures specialized hardware and software products for aerospace and commercial customers in support of the world's leading fighter aircraft. We produce mission support devices, data transfer equipment, cryptographic data transfer systems, servers and firmware for components that are critical support system elements for several of the world’s leading fighter aircrafts.If you are looking for a challenging, rewarding position and the opportunity to join an innovative dynamic team, keep reading!We offer:Competitive pay.100% paid medical, dental and vision coverage for you and your dependents as of date of hire.100% paid employee basic li

Orlando, FL • (28.9 miles) • Full Time • 9/7/2026

Position OverviewTews Company is seeking aSenior Mechanical Design Engineerwith a strong background incommercial product design, particularly for environments whereform, usability, and visual appeal are as critical as function.This role is ideal for an engineer who can bridgemechanical engineering and industrial design principles, creating products that not only perform reliably but also meet the expectations ofend users in clinical or professional settings.The right candidate will have experience designingcustomer-facing hardware productsnot just internally housed systemsand will bring a refined understanding ofmodern product aesthetics, ergonomics, and usability.Key ResponsibilitiesLeadend-to-end mechanical designof new products and design enhancementsDevelopenclosures and assembliesfor

Oviedo, FL • (33.4 miles) • Full Time • 9/6/2026

The CNC Programmer and Setup role involves leading CNC programming and machine setup activities to ensure efficient and precise manufacturing operations. This position reports directly to the CEO and requires expertise in programming HAAS lathes, 3 and 5-axis Hurco vertical mills using Fusion 360 CAM and Centroid programming. Working regular shift hours, the lead CNC programmer will develop and manage all programming, support first piece setup, define tools, develop fixtures, support machine maintenance, and troubleshooting in a collaborative team environment.ResponsibilitiesSet up and prepare CNC machines for production runsSupport First-Article runs on complex partsProgram CNC machines utilizing Fusion 360 CAM and Centroid softwareProgram Hurco Vertical Mills, HAAS lathe and Centroid dri

Kissimmee, FL • (33.9 miles) • Full Time • 9/6/2026

About Humble Imports, Inc. (ECD Automotive Design)At E.C.D. Automotive Design we have a vision and drive to create, build and bring to life the best custom vehicles on the planet. The role of our team is fundamental to the success of our product, brand, and business growth. Being selected to do this makes you part of a very special product and culture. The purpose of the job description is to give you absolute clarity in the role you play and the impact it has on our truly unique product. To learn more, visit www.ecdautodesign.com. – and enjoy exclusive content across E.C.D. Automotive Design’s web page on social media channels: Facebook, Instagram, YouTube, and LinkedIn.Role OverviewWe are seeking an experienced and results-driven Quality Assurance Technician (Preship Technician). This ro

Maitland, FL 32751 • (23 miles) • Full Time • 9/5/2026

HVAC Insulation Sr. Mechanic Company: COR3 MechanicalJob Type: Full-TimeLocation: Central FloridaOverview COR3 Mechanical is seeking an experienced HVAC Insulation Mechanic to support all aspects of commercial HVAC insulation work. This is a hands-on working position with growth potential to help lead and develop COR3’s newly forming insulation team.Responsibilities Install insulation for commercial HVAC systems, including ductwork, piping, equipment, and related mechanical systems.Measure, cut, fit, secure, seal, and finish insulation materials properly.Work with duct wrap, pipe insulation, board insulation, vapor barriers, adhesives, sealants, pins, tape, and related materials.Read and understand mechanical plans, specifications, and insulation requirements.Coordinate with COR3 field le

Lake Mary, FL • (24.4 miles) • Full Time • 9/5/2026

Location:Lake Mary, FLType:Full-timeExperience:1+ years (not a recent graduate)U.S. WORK AUTHORIZATION REQUIREMENTMust be a U.S. Citizen or U.S. Permanent Resident (Green Card Holder).Candidates must currently be located in the United States. Candidates located outside of the United States will NOT be considered. Laser Photonics Corporation does not provide visa sponsorship.We are looking for a hands-on Electrical Engineer whose primary work is systems-level troubleshooting of electrical and software issues, along with creating and editing electrical schematics and BOMs. This role requires independently figuring out problems with little or no supervision. You will also maintain accurate documentation, select components, and keep schematics and BOMs under proper document control.These machi

Orlando, FL • (28.9 miles) • Full Time • 9/5/2026

Position Summary:This position assists in the procurement of supplies and materials to support two manufacturing facilities.Job Duties and Responsibilities:Negotiate favorable terms, volume discounts and long-term contracts with suppliers.Establish strategic relationships with key suppliers to ensure alignments are in place to meet the company’s needs.Generate Purchase Orders to ensure proper levels of materials and services at the plant are maintained to ensure the supply chain is operating smoothly.Work within the ERP system in an orderly and timely manner.Communicate with Production, Quality, and Accounting regarding delays and other issues.Identify new sources of procurement to save costs.Knowledge, Skills, & Abilities:Understanding of ERP/MRP Systems; Microsoft Dynamic preferredBasic

Sanford, FL • (28.4 miles) • Full Time • 9/4/2026

Job Title:Converting Dept – Converting Production Utility / Machine Operator Reports To:Converting Manager Position Details· Maintain a safe and clean workplace· Understand production processes· Set-up machine, check and handling raw materials· Move and maneuver material and equipment using manual or motorized devices· The position works on a rotation basis, including days, nights, weekends and holidays covering 24/7.Education & Experience Requirements· High School Diploma/G.E.D.· 1-3 years’ experience as a machine operator· Associate degree/technical certificate preferred· Manufacturing/warehouse experience preferred· Knowledge of paper industry preferredKnowledge, Skills, & Abilities· Must be able to read, write, speak, and understand English· Ability to work in a team-oriented environme

Orlando, FL • (28.9 miles) • Full Time • 9/4/2026

As a Service Technician, you will provide essential support through equipment maintenance, installation, troubleshooting, and repair services for batteries and chargers. This role requires the ability to work both independently and collaboratively within a team to ensure reliable equipment performance and high levels of customer satisfaction during standard business hours.ResponsibilitiesPerform maintenance and repair on batteries and chargersTroubleshoot technical issues and implement solutionsInstall new equipment according to specificationsProvide prompt and professional customer supportEnsure compliance with safety standards and protocolsPreferred Qualifications1+ years' experience in equipment maintenanceHigh school diploma or equivalentStrong mechanical aptitudeCustomer service skill

Orlando, FL • (28.9 miles) • Full Time • 9/4/2026

Metal Fabricator I & II (Now Hiring – Orlando, FL)Company:Abacus StaffingLocation:Orlando, FL (Onsite – Shop Environment)Abacus Staffing is hiringMetal Fabricators (Level I & II)for a leading fabrication operation in Orlando. These roles are responsible for cutting, shaping, assembling, and welding metal components to meet production and quality standards.Spanish-speaking applicants are encouraged to apply –Se habla espaol.Pay RatesMetal Fabricator I:$18.00 – $21.00/hour (based on experience)Metal Fabricator II:$21.00 – $26.00/hour (based on experience)ScheduleMonday – Friday | 6:00 AM – 2:30 PM30-minute unpaid lunch15-minute paid breakKey ResponsibilitiesMetal Fabricator ICut and shape metal components from raw materialsRead blueprints, sketches, and work instructionsPerform layout, fitti

Orlando, FL 32814 • (26.5 miles) • Full Time • 9/3/2026

Position: Electrical Engineer IIILocation Schaumburg, IL / Albuquerque, NM / Avon, CO / Hunt Valley, MD / Belleville, IL / Boise, ID / Chicago, IL / Corona, CA / Dallas, TX / Davenport, IA / Lakewood, CO / Evansville, IN / Ft. Collins, CO / Ft. Myers, FL / Irvine, CA / Milwaukee, WI / Newport, KY / Northwest Arkansas / Orlando, FL / Overland Park, KS / Palm Springs, CA / Phoenix, AZ / Riverside, CA / San Diego, CA / Seattle, WA / Springfield, MO / St. Louis, MOYears of Experience: 5+ YearsAbout RTM:RTM Engineering Consultants is an MEP, Civil and Structural engineering firm that goes beyond the conventional consulting role. We forge deep partnerships with our clients by aligning with the goals, processes and people at each organization. By integrating our expertise, we offer a comprehensiv

Winter Garden, FL • (14.1 miles) • Full Time • 9/2/2026

We are seeking an experienced and detail-oriented Senior CAD Technician to join our Land and Construction teams. In this role, you will be responsible for creating accurate technical drawings and plans using CAD software to support survey and construction projects for large-scale construction, land development, plating, and more. Working closely with Project Managers and field personnel, you will translate client requirements and survey data into precise, high-quality deliverables while ensuring accuracy and compliance with project standards. The ideal candidate will possess advanced AutoCAD proficiency, strong computer skills, and the ability to manage multiple projects in a fast-paced environment. Success in this role requires exceptional attention to detail, strong communication skills,

Orlando, FL • (28.9 miles) • Full Time • 9/2/2026

"ONE STEP CLOSER TO YOUR NEW CAREER STARTS HERE"Hallmark Aviation is seeking professional Airline Ramp Turnaround Coordinators at MCO International Airport.PAID TRAINING PROVIDED! PREVIOUS AIRLINE EXPERIENCE REQUIRED!!!DEPARTMENT: Orlando (MCO)Hallmark Aviation is thrilled to welcome driven and experienced aviation professionals to join our team as Airline Ramp Turnaround Coordinators at Orlando International Airport (MCO)! If you thrive in high-energy environments, love working with aircraft operations, and take pride in precision and teamwork, this is your opportunity to lead from the ramp and make a real impact every single day. As a Turnaround Coordinator, you’ll play a key leadership role in ensuring safe, efficient, and on-time flight departures while being at the center of ground op

Orlando, FL • (28.9 miles) • Full Time • 9/2/2026

IntroductionVisium Resources has been asked to identify qualified candidates for this Production Supervisor I position. This position is a direct hire opportunity which is expected to be on-site in Orlando, FL.SummaryThe production supervisor role is a position leading mechanical/electrical assemblers in solder, general assembly, and fabrication. Responsibilities include planning hardware through assembly processes, status reporting and management of quality and schedule goals for multiple work cells / areas.Job Description:Overall leadership of mechanical and electrical assemblers.Management of production schedule ensuring meeting objectives for deliveries, cost, and qualityConduct hiring and releasing of workers as required to maintain production schedulesCreate a work environment conduc

Ocala, FL • (41.2 miles) • Full Time • 9/1/2026

Heavy ProductionShift: 6:00 am-2:30 pm or 2:30pm - 11:00pmPay: $15.00 - $16.00Weekly Pay Schedule, Every FridayJob Duties/Requirements:Operate production machinery.Follow safety protocols and maintain a clean work environment.Assist with inventory management and stock control.Collaborate with team members to meet production targets.High school diploma or equivalent.Previous experience in a manufacturing or production environment is preferred.Strong attention to detail and commitment to quality.Ability to lift heavy objects and stand for long periods.Required Skills & Qualifications:Good punctuality and attendance Ability to lift/push/pull 50+lbs.Good communication and teamwork skills.

Ocala, FL • (41.2 miles) • Full Time • 8/31/2026

***Must be available for training for two weeks (M-F 8am - 4pm)******After training, employee is expected to work 3rdshift (M-F 10pm - 6am)***QualificationsExperience:Basic Math Skills, 1 year (Required)Leadership, 1 year (Required)Strong Working Knowledge of Microsoft Office Suite, 1 year (Required)Work authorization:United States (Required)Full Job DescriptionPOSITION SUMMARYThe primary responsibility of this job is to ensure that all product that is ready for shipment meets pre-determined quality standards.ESSENTIAL FUNCTIONSPerform Quality Control test as required on all finished products.Required test will involve the use of laboratory scales, salt, moisture, and oil equipment.Performs specified quality checks on raw materials using laboratory alcohol, silver nitrate and other chemica

Casselberry, FL • (25.2 miles) • Full Time • 8/30/2026

We are seeking Entry Level Cable Assemblers to become an integral part of our team! You will perform assembly line tasks.GREAT BENEFITS OFFERED:Health, Dental, Vision, 401k & company match, and more!Flexible work schedule 8:00 am - 4:30 pm (Overtime offered)Get paid weeklyResponsibilities:Count and bag partsInsert wiresMaintain a clean and orderly work areaRun wire processing equipment.Qualifications:No previous experience is requiredAbility to work well in teamsAbility to thrive in a fast-paced environmentSodering Skills\nCompany DescriptionManufacturer of cable assemblies and wire harnesses.Company DescriptionManufacturer of cable assemblies and wire harnesses.

Orlando, FL • (28.9 miles) • Full Time • 8/30/2026

Land Rover Orlando Loves Their Technicians!We Offer Tremendous Earning Potential and Career Growth!At Least 2 Years Experience RequiredSign-on Bonus & Relocation fee is available upon experience!It’s Time to Join a Shop that Cares About Your Career and Financial FutureAt Land Rover Orlando, we encourage and support our employees to succeed and grow in their careers. We provide the resources and tools that are necessary to achieve success. We also know that the opportunity to advance your career is just as important as other company benefits. That’s why we offer continuous training and career advancement opportunities. In fact, many of our technicians are now in management roles!It’s no secret that Land Rove Orlando is one of the best dealerships in the industry. Whether you are a trained L

Orlando, FL • (28.9 miles) • Full Time • 8/30/2026

High school degree plus two (2) years experience in construction inspection, or C.E. degree. The preferred candidate will have a minimum of one (1) year bridge and/or roadway construction inspection experience, including experience in inspection of pavement marking maintenance operations, desilt and video operations, drainage repair operations, or other operations as required by the scope of work of the Task work order. Knowledge of Maintenance Rating Program (MRP) criteria.Must have the following as required by the scope of work of the Task work order:CTQP Concrete Field Inspector Level ICTQP Asphalt Roadway Level ICTQP Earthwork Construction Inspection Level ICTQP Final Estimates Level IFDOT Intermediate MOTCERTIFICATIONS: Nuclear Radiation SafetyOTHER:Complete the Critical Structures Co

Orlando, FL • (28.9 miles) • Full Time • 8/27/2026

Step into the dynamic and rewarding role of a Digital Film and Video Production Substitute Instructor at F.I.R.S.T. Institute, where you can share your passion and expertise with aspiring film and video professionals. While teaching experience is preferred, it is not a requirement; we seek an experienced film and video production professional to join our education team as an instructor! The ideal candidate will have experience in narrative film production, live video production, Adobe Premiere, Adobe After Effects, and Blackmagic DaVinci Resolve, as your primary focus is instructing the next generation of video and film professionals.Key ResponsibilitiesTeaching film and video production and post-production concepts in a dynamic, engaging formatInspiring and supporting students with a "han

Maitland, FL 32751 • (23 miles) • Full Time • 8/25/2026

Residential HVAC/R Service TechnicianAIR2 Homes is a residential and lite commercial AC company based in Orlando, Florida. The company's new owners and managers are building our team to serve custom and luxury homeowners and managers, and regional residential accounts, by offering competitive pay, benefits, training and support.AIR2 Homes is looking for an experienced technician to join our service team in daily activities, deliver accurate and timely services to customers, and manage various related service and administrative activities.Responsibilities:Respond to dispatches and complete equipment repairs and proposed improvementsDeliver exemplary customer services including clear communications and detailed reportingMaintain customer relationships and ensure repeat customers by upselling

Orlando, FL • (28.9 miles) • Full Time • 8/25/2026

ISCAR METALS, INC., a dynamic and innovative cutting tool company, has an immediate opening for a Technical Applications/Sales Representative for the eastern Florida area.Preferred candidates will have a minimum of 3-5 years machining & industrial sales experience but we are always willing to train the right individual that has a “can do” attitude. CNC programming experience and a college degree (engineering/industrial focus) is a plus.JOB SUMMARYThe Sales & Applications Representative is responsible for increasing Iscar Metal’s cutting tool market share in an assigned territory through the application support of cutting tools and their related accessories. A successful Sales & Applications Representative will possess a strong technical background in the metal removal industry with a heavy

Orlando, FL • (28.9 miles) • Full Time • 8/25/2026

Build your future with a growing engineering firm.Wilson & Girgenti is a full-service MEP/FP/S consulting engineering firm delivering innovative building systems design. Headquartered in Tampa, Florida, we are expanding our Orlando team and seeking a motivated Electrical Designer with an active Fundamentals of Engineering (F.E.) certification or will obtain it soon.This is an excellent opportunity for an early-career engineer to gain hands-on experience designing electrical systems for a wide range of commercial, healthcare, education, hospitality, multifamily, and mixed-use projects while working alongside experienced Professional Engineers who are invested in your success.ResponsibilitiesAssist with the design and engineering of electrical building systems.Prepare calculations, technical

The Villages, FL 32163 • (17.1 miles) • Full Time • 8/25/2026

Position Summary The QC Precast Lead is a hands-on leader responsible for overseeing quality control operations in an automated precast facility producing about 10 houses per day plus beams, posts, fence walls, and arches. This role combines active involvement with strong team development, ensuring quality standards are met while building a reliable, skilled, and accountable QC team. Key Responsibilities Team Leadership & Development Lead, mentor, and develop QC technicians and inspectors to create a dependable, high performing team. Foster a culture of accountability, teamwork, and continuous improvement. Provide hands-on training in pre-pour inspections, post-pour evaluation, and testing procedures. Conduct daily check-ins with the QC team to align production goals and quality expectatio

Winter Garden, FL 34787 • (16.7 miles) • Full Time • 8/24/2026

The Millwork Shop Manager oversees the daily operations of a millwork production shop, ensuring high-quality craftsmanship, efficient production, and timely delivery of custom woodwork products. This role involves managing a team of skilled craftspeople, coordinating projects, maintaining equipment, and ensuring compliance with safety and quality standards. The ideal candidate is an experienced leader with a strong background in millwork, woodworking, or cabinetry, and a proven ability to manage production processes and personnel effectively.Key Responsibilities:Production Oversight: Plan, schedule, and supervise millwork production to meet project deadlines and client specifications. Ensure efficient workflow and resource allocation.Team Management: Lead, train, and motivate a team of mil