The duties of an aircraft refueler will consist of servicing aircraft and other equipment with aviation and automotive fuels with the use of tanker trucks, hydrant carts or tow carts. Aircraft refulers are required to position the fueling equipment next to the aircraft and service it with fuel following all Airline and Company policy and safety regulations at all times. Other duties related to the job are completing required paperwork such fuel service records, tanker sheets, truck sheets and meter tickets and the sumping of overnight aircraft as well as performing normal shop housekeeping duties.
Benefits: 3 weeks of PAID TRAINING! Shift Differential Pay Regular pay increases Performance bonuses Overtime available Medical/dental Weekly pay 401K
Requirements: Must have CDL A or B licence Pass Federal background check, drug screen and physical Social Security Card and name on ID must match Social Security Card, or you will not pass Federal background check 18 years or older Must be able to read, write and speak and understand English, and have the ability to do basic math; (add, subtract, multiply and divide) Physical capability to perform all manual labor that the job requires (climbing, bending, lifting, pushing and pulling)

Pay Rate: $15.50/hr - $24.75/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products

FORTIFYING OUR DEFENSESMissiles and rockets are critical components of our national defense strategy. Responsible for servicing and maintaining them, Missile and Space Systems Maintenance specialists ensure these assets are fully operational at all times. From missile launchers to space lift boosters, these highly knowledgeable experts plan, organize and perform every service necessary to keep these systems in pristine working condition so they’re ready when we need them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB ASVAB REQUIREMENTSElectronicsQualificationsKnowledge of electronic theoryCompletion of a current Single Scope Background Investigation (SSBI)Completion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Job ID: 687763BR Date posted: Apr. 07, 2025Description:• Set up and operate one or more gear grinding, wheel dress and balancing machines to produce rough and finish ground splines, spur and helical gears.Typical Responsibilities• Follow specific instructions to set up and operate gear-grinding machines and to operate associated wheel dress and balancing equipment.• Use a variety of hand tools, gauges and dial indicators to install involute cams, yokes, arbors, work piece, etc.• Under direction of higher grade grinder operator, use optical equipment to present wheel dresser tools; balance and dress wheels as required, indicate work piece between bench centers prior to loading grinder and make any other adjustments and/or calculations necessary to meet quality standards.• Check and record work piece pitch and root diameters prior to grind, monitor machine operations, check finished part prior to unloading and obtain any required dimensional verification.• Visually check parts for finish, root profile and for indications of surface burn or tempering.• Maintain records of all finish dimensions and obtain inspection acceptance of finished part.• Perform other related work of a comparable or lower skill level as related to gear machining and check work of other operators as required.• Follow directions of higher-grade operators or Working Leader to resolve problems and correct any discrepancies indicated by inspection.• Refer questionable conditions or recurring difficulties to working leader or supervision.• Perform operator checklist as required and comply with all EH&S procedures.• As required segregate waste material and follow good housekeeping practices.May be assigned to carry out tasks, not specifically listed, within the scope and skill level of this job description in support of department objectives and to develop individuals' skills.#rmshotmiljobs#onelmjobBasic Qualifications:Make calculations involving shop mathematics and handbook formulas including algebra and trigonometry. Use precision instruments such as dial indicators, blade and ball micrometers, height gages and gear measuring wires. Equivalent to 2 years high school plus 2 to 3 years trades training.Experience 1 to 2 years.Clearance Level: NoneOther Important Information You Should KnowExpression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings.Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility.Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits.Schedule for this Position: Standard Monday to Friday 40 hour work weekLockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics.The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration.At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility.If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications.Experience Level: Hourly/Non-ExemptBusiness Unit: RMSRelocation Available: PossibleCareer Area: ManufacturingType: Full-TimeShift: Second

It takes great people toachieve greatness. People with a sense of purpose and integrity. People with a relentless pursuit of excellence. People who care about making things better For Those Who Make The World. Sound like you Join our top-notch team of54,000+ professionals in 60 countries who are making their mark on some of theworld’s most beloved brands, includingDEWALT, CRAFTSMAN, STANLEY, BLACK+DECKER, IRWIN, LENOX and more.What You’ll DoAs a Tangless Machine Operator,you’ll be part of our team located in Danbury, CT. You’ll get to:Operate up to two Tangless coiling machines or up to two presses or a combination of Tangless coilers and presses not exceeding three machines. Maintain setups on all machines by replacing perishable tooling.Clean, color, sort and package inserts as required. Inspect own work to prescribed quality standards, meet production standards and observe all safety and housekeeping requirements. Immediately report all problems and difficulties. Execute accurately all necessary records including counting and recording time.Personally perform production work and other related tasks below this grade level as time permits and as circumstances require.Work under direction of foreman or any intermediary the foreman may assign.Promptly alert the supervisor or other intermediary to problems or factors which exert disruptive or delaying influence on the operation.Job Requirements:Minimum of 2 years’ experience as a machine operator is requiredPrevious Machinist experience is preferred.High school diploma or equivalent.Ability to communicate effectively and able to read blueprints.Ability to use a manual micrometer is required.The selected candidate will possess strong mechanic aptitude and computer awareness.Must be able to stand/walk approximately 95% of dayMust be able to work overtime 10 hours per day Monday – Friday.What You’ll ReceiveYou’ll receive a competitive salary and a great benefits plan:Medical, dental, life, vision, wellness program, disability, 401(k), Employee Stock Purchase Plan, paid time off and tuition reimbursement.Vacation time, personal days, andholidays.Guaranteed annual increasesDiscounts on Stanley Black & Decker tools and other partner programs.What’s more, you’ll get that pride that comes from empowering makers, doers, protectors and everyday heroes all over the world. We’re more than the #1 tools and storage company and #2 security solutions provider, with a leading presence in engineered fastening. We’re visionaries. Industry 4.0 innovators. As successful as we’ve been in the past, we have so much further to go. That’s where you come in. Join us!This is a 2nd shift position, core hours are 3:00pm - 11:30pm, When scheduled for 9 hours 3:30pm to 1:00am, and on 10 hours 4:00pm to 2:30amSaturday/Sunday Overtime is available.Union Shop.All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran’s status or any other protected characteristic.We Don’t Just Build The World, We Build Innovative Technology Too.Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 58,000 professionals in 60 countries across the globe. Here, you’ll get the unique chance to impact some of the world’s most iconic brands including STANLEY TOOLS, DEWALT, CRAFTSMAN, MAC TOOLS and Black + Decker. Your ideas and solutions have the potential to reach millions of customers as we work together to write the next chapter in our history. Come build with us and take your career to new heights.Who We AreWe’re the World’s largest tool company. We’re industry visionaries. We’re solving problems and advancing the manufacturing trade through innovative technology and our Industry 4.0 Initiative. We are committed to ensuring our state-of-the-art “smart factory” products and services provide greater quality to our customers & greater environmental and social value to our planet. We are unique in that we have a rich and storied history dating back to 1843, but that hasn't stopped us from evolving into a vibrant, diverse, global growth company.Benefits & PerksYou’ll get a competitive salary and a comprehensive benefits plan that includes medical, dental, life, vision, wellness program, disability, retirement benefits, Employee Stock Purchase Plan, Paid Time Off, including paid vacation, holidays & personal days, and tuition reimbursement. And, of course, discounts on Stanley Black & Decker tools and products and well as discount programs for many other vendors and partners.What You’ll Also GetCareer Opportunity: Career paths aren’t linear here. Being part of our global company with 60+ brands gives you the chance to grow and develop your skills along multiple career paths.Learning & Development:Our lifelong learning philosophy means you’ll have access to a wealth of state-of-the-art learning resources, including our Lean Academy and online university (where you can get certificates and specializations from renowned colleges and universities).Diverse & Inclusive Culture:We pride ourselves on being an awesome place to work. We respect and embrace differences because that’s how the best work gets done. You’ll find we like to have fun here, too.Purpose-Driven Company:You’ll help us continue to make positive changes in the local communities where we work and live as well as in the broader world through volunteerism, giving back and sustainable business practices.EEO Statement:All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran’s status or any other protected characteristic.If you require reasonable accommodation to complete an application or access our website, please contact us at or at . Due to volume, we cannot respond to unrelated inquiries about the status of a completed application or resetting an account password.Know Your Rights: Workplace discrimination is illegal (eeoc.gov)

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Job DescriptionWe are currently seeking aMaintenance Mechanicfor our manufacturing/bottling facility to maintain, fix, and improve equipment used in bottling and packaging operations.Factory Location: Jersey City, NJCompensation: $38.58 / hourSign on Bonus of $3500 after 90 days of employmentShift differential: 6%-8% of base hourly rate paid for applicable hours workedSchedule:4:00 PM - 1:00 AM, Night Shift, Monday - Friday, Full-Time Ability to work holidays and weekends per business needs Must be able to attend training on day shift for approximately three weeks.Benefits:Medical, prescription, dental, vision, life and disability insurance, 401(k) with match, company discounts, paid vacation, and much more! Employees are eligible for benefit election on day 1 of employmentSkills Required:Perform routine preventative and corrective maintenance and testing on equipment Perform maintenance tasks to include repairing and improving, from minor rebuilds to major overhauls on all equipment Identify processing waste reduction opportunities and assist in reduction projects Participate in preventative maintenance program to help reduce costs of operations through PM optimization Dismantle, clean, repair and test electrical, electronic and mechanical components to determine component-level failure Communicate, coach, and train employees to continuously improve team’s ability to prevent loss of production and respond safely to equipment failures Maintain preventative maintenance logs and accurate records of all testing and repairs Recommend equipment to be included in preventive maintenance programs Perform preventative maintenance tasks to identify all potential mechanical and electrical issues with equipment throughout the plant Rebuild worn-out, but reusable, pieces of equipment, such as gearboxes for scheduled PM’s Troubleshoot, investigate, and repair all mechanical, electrical, and pneumatic machine systems Eliminate machine failures from recurring by utilizing the Breakdown Analysis process Communicate directly with equipment suppliers, contractors, and vendors as necessary Focus areas will include but are not limited to Production support, Mechanical Room, Water Processing, Boiler Room, and Wastewater Treatment Water Chemical Treatment ProgramQualificationsHigh School Diploma, GED, or equivalent work experience; additional technical training or certifications desired Three or more years proven maintenance experience in a manufacturing environment Candidates must complete the Mechanical Aptitude Test before being considered Prior experience with high-and low-pressure compressors, chillers, water treatment, boilers is preferred Strong technical knowledge of compressed air systems (pneumatics), electrical systems, hydraulics and water processing is preferred Knowledge of bottling equipment, PM programs and SAP system preferred Must have electrical knowledge of single and three phase power including the ability to diagnose and replace electric motors Must be able to work and accomplish projects with little to zero supervision Must be able to foster and build a team-work environment Communicate effectively with operators, technicians, mechanics, and supervisors Able to read, interpret, and analyze computer generated reports and accurately complete all tasks Must be able to do physical inspections of equipment that will require climbing, reaching, and extending arms overhead Able to lift and pull 50 lbs. as needed while performing work Must be proficient reading mechanical drawings / schematics and OEM technical prints Proficient computer skills, including the use of Microsoft Office applications Available for call-ins or to cover all shifts to support production teams as required Work together with Safety department to achieve a zero-injury workplace Must display a positive mental attitude and be open to a fast paced ever changing work environmentPrimo Brands’ established portfolio includes billion-dollar brands Poland Spring® and Pure Life®, premium brands like Saratoga® and Mountain Valley®, regional leaders such as Arrowhead®, Deer Park®, Ice Mountain® Ozarka®, and Zephyrhills®, purified brands, Primo Water® and Sparkletts®, and flavored and enhanced brands like Splash® and AC+ION®. Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come.Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. If you need any assistance or accommodations due to a disability, please contact us at

Our Team is Kind of a Big Deal! UniFirst is seeking a reliable and hardworking Maintenance Custodian to join our UniFirst community. As a Team Partner in the Maintenance Department, you will be performing housekeeping and cleaning activities of the facility in office spaces, kitchen areas, common areas, plant / production floor, restroom facilities, and parking lots / grounds areas. At UniFirst we have a standard Monday - Friday work week with periodic night and weekend overtime. We have an immediate opening and provide on the job training. Pay & Benefits: On the job training & great hourly pay + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What’s in it for you Training: Our Team Partners receive quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Growth: You may quickly find yourself on the fast-track to success. We are a rapidly growing company offering significant avenues for personal development and growth. Culture: Our culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds. We believe our diversity makes us who we are, and we strive every day to build a culture where everyone feels welcome. What you’ll be doing: Utilize equipment to perform housekeeping operations, including wet and dry mops, brooms, floor scrubbers, vacuum cleaners, cleaning supplies, towels, steel wool, carts, and trash cans.Ensure restrooms, kitchen, and breakroom areas are cleaned and stocked.Remove trash and place it in the designated area.Maintain window cleanliness.Uphold furniture by dusting and ensure builders hardware is satisfactory.Relocate light furniture to assigned areas as directed.Replace light bulbs in overhead fixtures when directed.Perform cleaning operations in the office areas, production floor, outside of the facility, and other property areas as assigned by the Maintenance Supervisor.Perform other duties as assigned by leadership QualificationsWhat we’re looking for:Must be at least 16 years of age or olderMust be 18 years of age or older to work in heights and electricityHigh school education and/or GED equivalent is preferred.Knowledge of cleaning materials and equipment to ensure safe usage of general cleaning chemicals.Ability to work independently with little or no supervision.Must be able to operate floor cleaning equipment and other tools as required.Ability to read, comprehend and interpret procedures and instructions in English.Ability to effectively present information and respond to questions from co-workers and managers.Ability to work overtime as needed is required.Ability to lift up to 80 lbs.About UniFirst The fabric of UniFirst is woven from its very unique family culture where our Team Partners enjoy a small company feel while taking advantage of the resources and stability that come with being a 2 billion-dollar organization.UniFirst is an international leader in the $18 billion-dollar garment services industry. We currently employ over 14,000 team partners who serve 300,000 business customer locations throughout the U.S., Canada, and Europe. We were included in the top 10 of Selling Power magazine’s “Best Companies to Sell For” list and recognized on Forbes magazine’s “Platinum 400 – Best Big Companies” list. As an 80-year old company focused on annual growth, there’s never been a better time to join our team.UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

Job InfoJob Location: Queens County, NYRoute Type: LocalType of Assignment: Direct HireHours Per Shift: 8 HoursHours Per Week: 40 HoursShift Start Time: 08:00 amWorking Days: Mon-FriTransmission Type: AutomaticJob RequirementsAdditional InformationMaintenance Mechanic - Earn $1,200-$1,400+ WeeklyPosition: Full-TimePay: $1,200 - $1,400+ per weekSchedule: Monday - Friday, with some Saturdays as neededLocation: Flushing, NYAbout the JobWe’re looking for an experienced Maintenance Mechanic. You’ll work hands-on to maintain, repair, and upgrade essential equipment.What You’ll DoPreventative Maintenance: Lead routine maintenance to keep downtime low.Repair & Troubleshoot: Fix equipment issues and keep machinery to spec.Welding & Adjustments: Perform needed welding repairs and make equipment adjustments.Refrigeration Monitoring: Oversee and maintain refrigeration systems.Project Support: Assist with equipment upgrades and installations.Daily Communication: Work with Quality Control, Supervisors, and Operators to meet production goals.Documentation: Report issues promptly to supervisors in writing and verbally.What You NeedExperience: 3-5 years in manufacturing maintenance.Mechanical Skills: Expertise in machining, welding, hydraulics, pneumatics, and fabrication.Tech Skills: Basic proficiency with Microsoft Word and Excel.License: Refrigeration Engineer’s License a plus, but not required.Physical Ability: Able to lift, push, or pull up to 60 lbs.Flexibility: Open to working 1st, 2nd, or 3rd shifts, weekends, and holidays.Preferred SkillsLOTO (Lockout/Tagout) safety experienceFamiliarity with Videojets, blow molders, and conveyor systemsKnowledge of motors, pumps, valves, seals, bearings, and electrical control systemsExperience with lathes, drills, grinders, and milling machinesPLC experienceRefrigeration Engineer's license is a plusBenefitsCompetitive weekly payTraining and career advancement opportunitiesPositive team environmentComprehensive access to tools and resourcesTo apply, please call Jessica @

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $29 - $36 depending on experience.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: · Ability to report to work in a timely manner as scheduled by supervisor.· Repair and overhaul equipment such as compressors, water pumps, air handlers, electrical and mechanical control devises and other similar machinery.· Test malfunctioning systems and components using electrical and/or mechanical skills.· Maintain legible corporate and personal records of work history.· Provide general repair work on refrigeration, heating and ventilation equipment such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors and electric motors.· Provide preventative maintenance activities; diagnose equipment malfunctions and operating efficiency of mechanical equipment.· Perform work on minor construction and remodeling projects including startups of new installations.· Other duties as assigned. Qualifications: Education/Training· Completion of a refrigeration technician training program (HVACR) from a technical school or completion of a technical program from a JR College.· Must have a valid EPA certificate.Work Experience and Skills· 1-3 years of commercial refrigeration experience required.· Equivalent passing grade, 80% or better, on Tek Skills Level 3 test.· Experience working on refrigeration equipment in convenience stores or supermarkets a strong plus. Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.· Must have a good driving record and be able to work independently.· Emergency on-call availability is a basic requirement.· Must be able to lift up to 60 lbs. with no assistance and also be able to sit and/or stand for severa Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:This position maintains a safe, reliable, and cost-efficient fleet of vehicles, both ground support equipment and street vehicles. He/She ensures proper use and care of physical assets, helps prevent equipment failures, controls costs, manages external vendor relationships, works closely with auto mechanics and internal customers, and performs regular equipment and facility audits. This position monitors fleet vehicle equipment maintenance. He/She maintains automotive cost effectiveness by identifying trends, monitoring key expense indices, and identifying and implementing cost-saving strategies. This position supervises mechanics within the department.Responsibilities:Schedules preventative maintenance inspections and reviews the results, monitors repairs, and performs vehicle audits to ensure mechanics adhere to safety, regulatory and appearance standards. Analyzes equipment or vehicle system failures to determine root causes and resolve problems, and plans and coordinates equipment repairs with internal and external groups.Ensures adequate inventory levels (e.g., parts, tires, etc.) to support business processes.Adheres to purchasing limits, expense approval procedures, and equipment disposal guidelines to remain within cost plan.Reviews and approves automotive expenses.Determines employee training needs to produce continuous development plans.Conducts performance evaluations and resolves individual and group performance issues.Qualifications:Knowledge of mechanical fundamentals, maintenance, diagnosis, and repair to vehicle or aircraft fleet operation Ability to manage equipment repair and oversee the correction of problems with tools, machinery, and other standard technical equipment Ability to manage inspections, physical assets, and working relationships with vendors Internal Salary Grade: 20EEmployee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.Pay Range:Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $90,540.00/year to $130,800.00/year. Pay is based on several factors including but not limited to, market location and may vary depending on job-related knowledge, skills, and education/training and a candidate’s work experience. Hired applicants are offered annual short-term and/or long-term incentive compensation programs, subject to applicable eligibility requirements. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. The company offers the following benefits for this position, subject to applicable eligibility requirements. Medical/prescription drug coverage, Dental coverage, Vision coverage, Flexible Spending Account, Health Savings Account, Dependent Care Flexible Spending Account, Basic and Supplemental Life Insurance & Accidental Death and Dismemberment, Disability Income Protection Plan, Employee Assistance Program, 401(k) retirement program, Vacation, Paid Holidays and Personal time, Paid Sick and Family and Medical Leave time as required by law, and Discounted Employee Stock Purchase Program.

Pay Rate: $15.50/hr - $24.75/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products

KEEPING PIPES FLOWINGThe Air Force must maintain thousands of miles of fuel and water lines essential to our daily operations. It’s the job of Water and Fuel Systems Maintenance specialists to manage the plumbing, wastewater collection systems, liquid fuel storage and natural gas distribution systems on every base. These professionals are highly trained in a wide variety of areas, including the principles of operation and construction and fire suppression systems in order to keep our bases running smoothly while upholding the highest environmental standards.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M) and 28 Electronics (E)QualificationsPossession of a valid driver’s license to operate government motor vehiclesFreedom from fear of confined spaces Freedom from fear of heightsNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

We are looking for a 2nd shift Coiling Department Associate to join our team in Danbury, CT.As a coiling department associate, the selected candidate will work in Mandrel Coiling, insert Finishing, Cleaning, and/or Wire Forming. They will be responsible for the following:Set up and operate the following:Any combination of mandrel coiling machines and strip machines (including automated strip feed cells), not to exceed a total three machines;Or, two wire mills,Or, one milling, serrating, cut-off, Torrington, notching, strip feed or reel side machine, and maintain notch depth adjustment on notching machine.Or, any finishing machines and up to two punching devices when required.Maintain setups on all machines by replacing all perishable tooling.Clean, color, sort and package inserts as required. Inspect own work to prescribed quality standards, meet production standards and observe all safety and housekeeping requirements. Report immediately all problems and difficulties. Execute accurately all necessary records including counting and recording time.Operate any inspection or production reporting systems.Promptly Alert the supervisors or other intermediary to problems or factors which exert disruptive or delaying influences on the operation.Work under direction of foreman or any intermediary the foreman may assign.Must be able to lift up to 35lbs throughout the day as needed for material handling within job description.Job Requirements:Minimum of 2 years’ experience as a machine operator is requiredHigh school diploma or equivalent.Ability to communicate effectively and able to read blueprints.Ability to use a manual micrometer is required.The selected candidate will possess strong mechanic aptitude and computer awareness.Must be able to stand/walk approximately 95% of dayMust be able to work overtime 10 hours per day Monday – Friday.What You’ll ReceiveYou’ll receive a competitive salary and a great benefits plan:Medical, dental, life, vision, wellness program, disability, 401(k), Employee Stock Purchase Plan, paid time off and tuition reimbursement.Vacation time, personal days, andholidays.Guaranteed annual increasesDiscounts on Stanley Black & Decker tools and other partner programs.What’s more, you’ll get that pride that comes from empowering makers, doers, protectors and everyday heroes all over the world. We’re more than the #1 tools and storage company and #2 security solutions provider, with a leading presence in engineered fastening. We’re visionaries. Industry 4.0 innovators. As successful as we’ve been in the past, we have so much further to go. That’s where you come in. Join us!This is a 2nd shift position, core hours are 3:00pm - 11:30pm, When scheduled for 9 hours 3:30pm to 1:00am, and on 10 hours 4:00pm to 2:30amSaturday/Sunday Overtime is available.Union Shop.All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran’s status or any other protected characteristic.We Don’t Just Build The World, We Build Innovative Technology Too.Joining the Stanley Black & Decker team means working in an innovative, tech-driven and highly collaborative team environment supported by over 58,000 professionals in 60 countries across the globe. Here, you’ll get the unique chance to impact some of the world’s most iconic brands including STANLEY TOOLS, DEWALT, CRAFTSMAN, MAC TOOLS and Black + Decker. Your ideas and solutions have the potential to reach millions of customers as we work together to write the next chapter in our history. Come build with us and take your career to new heights.Who We AreWe’re the World’s largest tool company. We’re industry visionaries. We’re solving problems and advancing the manufacturing trade through innovative technology and our Industry 4.0 Initiative. We are committed to ensuring our state-of-the-art “smart factory” products and services provide greater quality to our customers & greater environmental and social value to our planet. We are unique in that we have a rich and storied history dating back to 1843, but that hasn't stopped us from evolving into a vibrant, diverse, global growth company.Benefits & PerksYou’ll get a competitive salary and a comprehensive benefits plan that includes medical, dental, life, vision, wellness program, disability, retirement benefits, Employee Stock Purchase Plan, Paid Time Off, including paid vacation, holidays & personal days, and tuition reimbursement. And, of course, discounts on Stanley Black & Decker tools and products and well as discount programs for many other vendors and partners.What You’ll Also GetCareer Opportunity: Career paths aren’t linear here. Being part of our global company with 60+ brands gives you the chance to grow and develop your skills along multiple career paths.Learning & Development:Our lifelong learning philosophy means you’ll have access to a wealth of state-of-the-art learning resources, including our Lean Academy and online university (where you can get certificates and specializations from renowned colleges and universities).Diverse & Inclusive Culture:We pride ourselves on being an awesome place to work. We respect and embrace differences because that’s how the best work gets done. You’ll find we like to have fun here, too.Purpose-Driven Company:You’ll help us continue to make positive changes in the local communities where we work and live as well as in the broader world through volunteerism, giving back and sustainable business practices.EEO Statement:All qualified applicants to Stanley Black & Decker are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, disability, veteran’s status or any other protected characteristic.If you require reasonable accommodation to complete an application or access our website, please contact us at or at . Due to volume, we cannot respond to unrelated inquiries about the status of a completed application or resetting an account password.Know Your Rights: Workplace discrimination is illegal (eeoc.gov)

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $45-$58 per hour DOE.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.JOB SUMMARYCoolSys Energy Solutions (CES) is currently seeking a CoGen Service Technician to inspect and diagnose on-site Power Generation and related equipment. Responsibilities: Must be thoroughly familiar and have detailed knowledge of all aspects of our product offerings including CHP and Balance of Plant (including not limited to HRSG, radiators, steam/hydronic boiler, absorption chiller, chiller, standby generators, automatic transfer switches, switchgear), island and parallel operation, Comap control system, Building Management Systems, all regarding assembly, repair, wiring, re-building, testing, and troubleshooting.Regularly travel to jobsite locations to perform preventive maintenance, corrective maintenance, unscheduled service, and troubleshooting, mechanical & electrical repairs on natural gas and biogas engines, generator sets, CHP power generation equipment, and related equipment.Monitoring system performance via remote control on-line, diagnoses technical malfunctions / operator errors, and provides solutions.Interface with system operators/field technicians and provides technical guidance.Performance of engine overhauls, electrical & mechanical testing, calibration and commissioning.Must provide clear and concise reports of all work performed daily for both internal and external reporting, observe and report conditions that could result in unscheduled or corrective maintenance, and communicate in a timely manner.Maintain designated project & service records, and practice consistent record keeping.Contribute to a pleasant and positive work atmosphere where all team members feel important and responsible.Adapt to the diverse needs of a small team and address internal and external requirements with flexibility and creativity.Regularly improve and update product knowledge by participating in educational and product training opportunities.This description contains information necessary to describe and evaluate the job. It should not be construed as a detailed description of all work performed but indicates the kinds of duties and skills expected.The position must complete other work tasks as assigned. Qualifications: The candidate must have a strong reciprocating engine and electrical background with the ability to display a high level of skill and understanding regarding internal combustion engines, generator sets, ideally natural gas engines, but will consider applicants that have experience with diesel standby or other engine technologies (e.g. compression engines).Will also consider technicians that have a more holistic background and excellent experience and trackrecord around complex technologies like aircraft engines and turbines.Be able to complete technical start-up of gas engines and CHP power systems.Independently diagnose and repair power systems.Basic working knowledge of advanced controls, safety shut-downs, circuit breakers and control panelwiring.Must be available to work over-time and occasionally travel on weekends.Must be able and willing to travel.Must be able to work independently.Excellent written and verbal communication skills and demonstratedproficiency composing writtencommunications.Outstanding interpersonal skills.Excellent telephone skills and computer knowledge.High energy level, comfortable performing multifaceted projects in conjunction with day-to-day activities.Resourceful, well organized, highly dependable, efficient and detail oriented.Must present a positive, professional, and team player attitude.Must be flexible and able to adapt to change quickly.Must possess a valid driver’s licenseExperience and knowledge of IP Networking including troubleshooting Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Pay Rate: $15.50/hr - $24.75/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products

SPECIALIZED AIRCRAFT IS OUR SPECIALTYThe Air Force employs hundreds of tactical aircraft to complete our missions, including fighters, strike-fighters and attack planes. It’s the responsibility of Tactical Aircraft Maintenance specialists to ensure that every component of these high-performance aircraft is maintained to the most exacting standards. These experts ensure that the aircraft in their care are ready to fly at a moment’s notice so that pilots can safely and effectively complete their mission.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of principles applying to aircraft systemsNormal color visionCompletion of a current National Agency Check, Local Agency Checks and CreditCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Pay Rate: $15.50/hr - $24.75/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products

MAINTAINING AIRCRAFT INTEGRITYWhen an aircraft suffers damage, it’s essential to fix it and get back in the air. Responsible for repairing physical damage, Aircraft Structural Maintenance specialists maintain the high quality structures of Air Force aircraft. Utilizing various methods, these professionals do everything from installing replacement parts to building a replacement from scratch in order to restore the structural integrity of the aircraft and ensure the safety of the Airmen who fly them.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of aircraft construction featuresCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Hiring a 1099 Independent Contractor Immediately! Flexible work environment. Set your own hours, work with minimal guidance, be your own boss! OPENLANE is searching for an Independent Contractor for vehicle inspections. The Independent Contractor will provide vehicle inspection services at car dealerships. The Independent Contractor must have a minimum of 5 years of automotive experience as a vehicle mechanic or equivalent mechanical background. Required: A working iPhone with a data plan,(We do not currently support Android devices to perform inspections) a basic OBD II scanner, reliable transportation, and valid driver's license. Some of the perks include: Make good money in an exciting fieldBe your own boss and set your own hoursFlexible work environmentAbility to work with minimal guidance and supervision

Pay Rate: $15.50/hr - $24.75/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Pay Rate: $15.50/hr - $24.75/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products

Pay Rate: $15.50/hr - $24.75/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products

Pay Rate: $15.50/hr - $24.75/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products

Pay Rate: $15.50/hr - $24.75/hr plus commission depending on background and experience.The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. POSITION OVERVIEW:Guitar Center embodies the world of creativity and music by encouraging staff to find their own individual sound. Our mission is to develop and nurture lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the joy that comes from creating music. We believe in creating inclusive environments that put our customers first all the while fulfilling our mission.As our Repair Tech (Guitar), you will provide perform maintenance and repair services on customer-owned instruments and to assist in maintenance of specific store inventory, continually building and increasing the business through great customer experience and quality work.A few special characteristics that make our Repair Technicians successful:Customer Focus: Understands customer service principles, and able to provide an excellent customer experience. Able to connect with customers in a meaningful way. Is approachable, genuine, knowledgeable, encouraging, passionate, and committed to helping customers. Able to step in to handle customer service issues.Initiative: Able to identify opportunities & issues and follow through on work activities to capitalize or resolve them. Able to learn quickly and take positive action without being requested to do so. Able to develop knowledge and skills including product, store operations, sales and leadership.Selling: Able to work through GC certification program to gain a base understanding of products and sales techniques.Training: Able to effectively train learners and communicate info and techniques so that they are retained.As our Repair Technician, you will:Interact with customers, ensuring a positive customer experienceService customer-owned instruments with a high level of craftsmanshipMaintain store owned gear, as requestedComplete warranty repair workAdditional duties as assignedWhy Guitar Center Here's just some of the rewards:For our employees who are musicians we offer the unique opportunity of gig leave--take time off to share your music with the world and return to your job after your tour! Guitar Center offers robust benefits and perks, including Medical, Dental, Vision, 401K plus company match, mental health support, paid sick/holiday/vacation time, employee discount program, and tuition reimbursement options.Requirements: Skilled understanding of repairing Guitars Preferences: Foundational product knowledge on Guitar Center products