FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

We are looking for a Tire and Lube Technician with a passion to service vehicles. If this is, you and you’re ready for your next destination then you have cruised to the right spot! Wage: $20.00 hourly Apply today and shift your career into drive for tomorrow! Not only do you get to be part of an organization where you Drive your Potential and Power your Passion you get major perks and discounts! Just to name a few Hertz perks: Up to 40% off the base rate of any standard Hertz rental Take advantage of Hertz negotiated discounts (Travel,Tickets- movies, concerts, theme parks, Electronics, Food, Fitness)Credit Union Access Health & Wellness benefits Tuition Reimbursement Pet Insurance Paid Parental Leave Career Growth with hands on learning Educational Background: High School Diploma or equivalent preferred Professional Experience: Entry level position with no required experiencePreferred prior experience with automotive repair (personal or professional) Knowledge: Must be able to perform vehicle repairs with oversightAbility to use shop equipment such as lifts, tire changing equipment, alignment machines, and scan tools Additional Notes: Must have tools to perform necessary repairsMinimum tools needed for the job. 3/8” and ½” impact wrenchSockets wrench - metric and standard - preferably long and short lengths.Oil Filter wrenches and toolsTPMS tool - reset tire sensorsCombo wrenchesScrewdriversMust have a Valid Driver’s LicenseThe Hertz Corporation operates the Hertz, Dollar Car Rental, Thrifty Car Rental brands in approximately 9,700 corporate and franchisee locations throughout North America, Europe, The Caribbean, Latin America, Africa, the Middle East, Asia, Australia and New Zealand. The Hertz Corporation is one of the largest worldwide airport general use vehicle rental companies, and the Hertz brand is one of the most recognized in the world. US EEO STATEMENT At Hertz, we champion and celebrate a culture of diversity and inclusion. We take affirmative steps to promote employment and advancement opportunities. The endless variety of perspectives, experiences, skills and talents that our employees invest in their work every day represent a significant part of our culture – and our success and reputation as a company. Individuals are encouraged to apply for positions because of the characteristics that make them unique. EOE, including disability/veteran

Please note, this position is located at Winter Park Resort in Winter Park, CO.Year RoundWho We Are: At 67 miles away, Winter Park is the closest ski resort to Denver. With easy access to 765,000 acres of public land, Winter Park is home to endless adventures. Whether you are looking to have your first taste of a winter season or to build a long-term career, we have something for everyone. Perks & Benefits:Free season pass to Winter Park and all Alterra ResortsDiscounted friends & family ticketsMedical, dental, vision, life, paid parental leave and more for eligible employees401(k) plan with 100% company match - up to 4%Mental health resources for all employeesFood & beverage and retail discounts Onsite employee childcare based on availabilityDiscounted equipment rentals, pro-deals, and morePOSITION SUMMARY:The Vehicle Mechanic's primary responsibilities are to repair, service, recondition, overhaul and maintain vehicles, equipment, and their components in the Winter Park Fleet. Follows consistently Winter Park/ Intrawest policies and procedures. You may be placed in Heavy Equipment Mechanic, Auto & Truck Mechanic, or Small Equipment Mechanic. ESSENTIAL DUTIES:Perform inspections, maintenance, and repairs as assigned by Equipment Shop Foreman/Fleet Maintenance Foreman.Assist Master Mechanics as assigned by Equipment Shop Foreman/Fleet Maintenance Foreman.Safely transport vehicles or equipment to the shop.Estimate expected repair time and costs.Complete work orders and other paperwork; repairs.Notify the appropriate department upon completion of repairs.Wear safety equipment.Maintain a clean and orderly workstation (shop).Report and correct, if possible, unsafe conditions of vehicles, equipment, or shop.Complete work promptly with demonstrated attention to detail and accuracy.Maintain a friendly, congenial, and helpful attitude while effectively dealing with guests and other employees.Perform other duties as directed.Assist vehicle and equipment users with mechanical and operational procedures.Assist Foreman with paperwork.Update scheduled maintenance tags or notices.Keep current and well-informed on related topics in the field of vehicle/equipment maintenance.This job description is an overview of the scope of responsibilities and is not intended to be an inclusive list of job tasks and expectations. With the evolution of this resort and position, the responsibilities of this position may change.EDUCATION & EXPERIENCE REQUIREMENTS:Education:High school diploma or GEDExperience:One-year formal training or demonstrated skill in any of the following:auto mechanicsdiesel mechanicsauto electrical systemshydraulicstest equipmentbasic weldingTwo years on the job experience in any or all of the above.QUALIFICATIONS, KNOWLEDGE, SKILL, AND ABILITY REQUIREMENTS:Current First Aid card is desirableMust be able to operate a motor vehicle All shop tools, equipment, and testing instrumentsComputer analyzersAll area vehicles and equipment, over-snow vehicles, wheeled vehicles, chainsaws, and pumpsGasoline and diesel enginesPower and hand toolsArc and gas welderCutting torchPaint sprayerPrecision and electrical instrumentsWork order forms.Earplugs, hearing protectionPHYSICAL DEMANDS AND WORKING CONDITIONS:This position may be required to work evenings, weekends, and holidays.Stand, over 2/3 of the time.Walk, 1/3 to 2/3 of the time.Sit, less than 1/3 of the time.Move up to 75 lbs., 1/3 of the time (tracks, parts, oil barrels).Carry 50 lbs. less than 1/3 of the time (parts).Push/pull up to 75 lbs, 1/3 of the time.Climb/hike, less than 1/3 of the time (ladders, stairs to parts room).Balance on icy terrain, less than 1/3 of the time (outside repairs).Stoop/kneel/crouch/crawl, over 2/3 of the time (repairs).Reach/handle/finger/feel, over 2/3 of the time (small and large tools, parts).Talkordinary, more than 2/3 of the timeover loud noise, 1/3 of the timeordinary, more than 2/3 of the timeover loud noise, less than 1/3 of the timeVisionaverage acuity/near, over 2/3 of the timeaverage acuity/far, less than 1/3 of the timeWAGE:The base hourly pay range below represents the low and high end of Winter Park Resorts' hourly pay range for this position. Actual pay will vary and may be above or below the range based on various factors including but not limited to experience, education, training, location, merit system, quantity or quality of production, responsibilities, and regular and/or necessary travel. The range listed is just one component of Winter Park Resorts' total compensation package for employees. Other rewards may include many region-specific benefits.Hourly pay range: $24 - $26 DOEOTHER DUTIES AS ASSIGNED:This position description is an overview of the scope of responsibilities for the role described above. With the evolution of Winter Park Resort, the responsibilities of this position may change as may the dates associated with many of the tasks. During these times of change, this position requires the flexibility and willingness to accept new responsibilities and potentially transfer others. It will also be the responsibility of any employee of Winter Park Resort to be a positive influence on the transformation of the resort and its associated lines of business.AN EQUAL OPPORTUNITY EMPLOYER:Winter Park Resort is an Equal Opportunity Employer and is dedicated to the principles of equal employment opportunity in any term, condition, or privilege of employment. Application Deadline:Recruiting timelines vary by position, however, all Winter Park Resort positions accept applications for a minimum of 3 business days from the posting date listed above. This position is open and still accepting applications.

Securitas Technology Corporations is a division of Securitas AB, the largest protective services provider in the world with over 370,000+ Securitas Heroes across the world.STC offers a full portfolio of video, access, intrusion, fire and integrated systems and services. As a leading systems integrator and alarm monitoring company, we deliver the SES Difference, serving countless long-term clients with solutions and services that protect their people, customers, and assets.STC is seeking technically minded individuals possessing experience with low voltage electronics specializing in electronic security solutions. Our teams are responsible for providing service on STC products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed.Respond to trouble tickets to ensure application uptime and system performanceWork individually and as a team to diagnose and resolve application issuesExecute preventative maintenance tasks to maximize application availability and identify system faultsPerform routine configuration changes (user permissions, application configuration, etc.)Document all system modifications through a digital change control tracking systemProduce quality technical documentation describing the conceptual and quantitative facets of system deployment, intended for both a technical and non-technical audiencePerform pre-deployment end to end testing of all upgrades and major modificationsPerform on site installations of software upgrades and major modificationsMinimum RequirementsHigh School diploma required or equivalentFamiliarity installing and troubleshooting low voltage equipmentStrong working knowledge of commercial access control, CCTV, burglary alarm, intrusion systems, and fire alarmsStrong working knowledge of Microsoft OfficeStrong written and verbal communications skillsWorking knowledge of network communications and IP addressingExcellent problem solving and analytical skillsExcellent time management skillsPositive attitude and strong work ethicCertifications in enterprise grade CCTV and Access Control systems a plusSTC offers comprehensive benefits including:Highly competitive salaryCompany training and industry leading certification programCompany VehicleCompany Cell PhoneMedical, Dental, Vision, and Life InsuranceCompany Paid Short Term and Long-Term Disability401K with 60% Match up to 6% of salaryPaid vacation, holiday and sick timeEducational AssistanceExceptional growth opportunitiesWide variety of employee discounts on travel, equipment, and more!We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $28.13-54.60/hr.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: JOB SUMMARYThe Service Tech 5 - Refrigeration is responsible for troubleshooting, maintaining, and repairing refrigeration systems. They are expected to handle complex technical issues, provide guidance to junior technicians, and ensure the safe, efficient, and reliable operation of refrigeration equipment for commercial or industrial clients.ESSENTIAL DUTIES AND RESPONSIBILITIESAbility to report to work in a timely manner as scheduled by supervisor.Repair and overhaul equipment such as compressors, water pumps, air handlers, electrical and mechanical control devices and other similar machinery.Test malfunctioning systems and components using electrical and/or mechanical skills.Maintain legible corporate and personal records of work history.Provide general repair work on refrigeration, heating and ventilation equipment such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors and electric motors.Provide preventative maintenance activities; diagnose equipment malfunctions and operating efficiency of mechanical equipment.Perform work on minor construction and remodeling projects including startups of new installations.Performs other duties as assigned. Qualifications: Education / TrainingHigh school diploma or GED, equivalent work experience and trade or technical school classes.Must have passed Tech Skills level 5 with an 80% or better.Valid EPA certificate.Work Experience / Skills5+year's experience in commercial HVAC, refrigeration, and electrical required.Basic knowledge of refrigeration, HVAC, ice machines, gas furnaces, and electrical.Experience working on refrigeration equipment in convenience stores or supermarkets a strong plus.Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.Good mechanical skills.Good communication skills and the ability to build strong relationships with customers, and management.Ability to take direction from Sr. Specialist or Supervisor.Must have a good driving record and be able to work independently.Emergency on-call availability is a basic requirement.Must be able to lift up to 60 lbs. with no assistanceand be able to sit and/or stand for several hours at a time.Valid driver’s license.Good driving record.Ability to understand and follow all company policies and procedures and all applicable State and Federal laws.Ability to use typical business tools including E-Mail, Word, Excel, etc. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Job DescriptionGREAT PAY!Starting Rate:$42.30 / hourRate after 3 months: 44.42 / hourRate after 6 months: $45.63 / hourShift Differential:6%-8% of base hourly rate paid for applicable hours worked$5000 SIGN ON BONUS – Payable in two incrementsPRIMO BRANDS OFFERS A POTENTIALRELOCATION PACKAGE UP TO $7500 BASED ON COMPANY POLICYGROWTH AND STABILITY – Primo Brands Corporation has over 50 production facilities and 200 depotsEMPLOYEE REFERRAL BONUSES – Unlimited!Our Benefits Package 401(k) matching; uniform allowance; dental insurance; disability insurance; employee assistance program; employee discounts and perks; health insurance; health savings account; life insurance; paid orientation; paid time off; paid training; paid vacation; prescription drug insurance; safety equipment provided; vision insurance, Day 1 benefit enrollmentSchedule Monday – Friday, Full-Time, Day Shift Ability to work holidays and weekends per business needsSkills Required Plan, lead, and execute preventative maintenance (PM) according to schedule to minimize equipment downtime Complete reactive maintenance on production lines to recover from equipment failures by repairing mechanical, electrical, and structural components Complete machine tear down/repair and assembly and work on PLCs, VFDs, and electric motors Conduct creative problem solving to identify and perform equipment improvements Coach and develop operators and peers on basic maintenance concepts and optimal equipment settings Facilitate seamless handoffs and communicate key information to peers, team members, and factory leadership team. Participate in special project work on equipment upgrades or installations Provide break relief to production operators or team members as needed Operate a forklift as needed to complete duties Support equipment installations, retrofits and upgrades to include vendors and contractors Troubleshoot/ investigate and repair all mechanical, electrical, pneumatic, and utility systems including chillers, air compressors etc. Ability to weld and fabricate to ensure equipment functionalityQualificationsQualifications High School Diploma, GED, or equivalent; technical training or certifications desired 5+ years of preventive maintenance and repair experience in a high speed industrial manufacturing environment Strong knowledge of pneumatics, electrical systems, and hydraulics required, with water processing experience desired. Proficiency in reading mechanical drawings and OEM technical prints for parts identification Electrical knowledge of single and three-phase power, with the ability to diagnose and replace electrical motors. Desired experience in Programmable Logic Control (PLC) Experience with compressors, chillers, water treatment, and boiler maintenance. Proficiency in Microsoft Office applications; Computerized Maintenance Management Systems (CMMS), ERP systems, SAP system experience preferred Independent professional with strong problem-solving, decision-making, and coaching skills. Effective communicator capable of fostering team collaboration and managing projects with minimal supervision. Physical ability to sit, stand, push, pull, climb ladders, and walk all day with or without reasonable accommodation. Must be able to perform physical inspections of equipment, which will require climbing, reaching, and extending arms overhead. Successful completion of the Mechanical Aptitude Test during the interview process. Flexibility to work holidays, weekends, and provide on-call coverage in our 24/7 facility is requiredPrimo Brands’ established portfolio includes billion-dollar brands Poland Spring® and Pure Life®, premium brands like Saratoga® and Mountain Valley®, regional leaders such as Arrowhead®, Deer Park®, Ice Mountain® Ozarka®, and Zephyrhills®, purified brands, Primo Water® and Sparkletts®, and flavored and enhanced brands like Splash® and AC+ION®. Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come.Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. If you need any assistance or accommodations due to a disability, please contact us at

The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries.SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.Are you dreaming about a position where you can deliver quality, meaningful results Come be a part of our diverse, multi-disciplined team of engineers, operating in an agile environment, using the latest tools and methodologies. Develop your technical acumen as well as your leadership skills at a company with huge potential for long-term career growth. As an Engineering Manager, you will be using your skills and expertise to manage functional teams through program execution for our products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You will represent the engineering department at all management level meetings. You'll ensure that the engineering design, documentation, and approvals meet the program schedules, are obtained in a timely manner and that engineering hours expended are productive, meeting program goals and budgets. You will own and continuously improve processes and procedures, oversee training of staff and provide technical direction as required.Here’s what you can expect:Generous paid time off and flex timeFriendly and talented colleaguesExclusive SNC company eventsLeadership and development trainingSNC Mentorship ProgramEducation reimbursementSite specific amenities:Free to use fitness center on-siteState-of-the-art coffee houseFull-service Cafeteria with planned breakfast and lunch optionsModern Campus setting built with collaboration spaces, spectacular mountain views and natural light throughoutAccess to walking and biking trailsResponsibilities:Support project staffing plans, schedules, budgets, bids, and estimates for proposed program work packages, including the execution of risk mitigation plans.Ensure the availability and effectiveness of required tools, processes, and training to achieve program success, while aligning with SNC tools/processes and industry best practices/standards.Manage resource allocations required for program task execution, as well as risk, issue, and challenge identification.Collaborate with the business to determine staffing requirements and help source, screen, interview, and hire top engineering talent.Execute onboarding support, training, mentorship, and career path/talent development activities for engineering discipline teams.Provide career path support, conduct performance evaluations, and facilitate conflict resolution.Qualifications You Must Have:Bachelor's of Science degree in a related disciplineTypically, 8+ years of progressive engineering experience, which includes 4+ years of management experience.Experience leading the development, maturation, and approval of product level designsAdvanced knowledge of industry-standard mechanical design principles, to include, but not limited to parametric design, model-based definition, material hardware selection, manufacturing, and production processesThorough understanding of engineering principles and practicesExperience with Computer Aided Engineering tools, analysis and simulationAbility to work in multi-disciplinary design and development teamsExcellent communication and organizational skillsThe ability to obtain and maintain a Top Secret U.S. Security Clearance is required Qualifications We Prefer:Experience applying and interpreting Geometric Dimensioning and Tolerancing (GD&T) per ASME Y14.5Experience with CATIA 3DExperienceFamiliarity with industry standard drafting standards per ASME Y14.100 or the DRMsFamiliarity with reverse engineering practices to include 3D scanning and hand-surveyingFamiliarity with additive manufacturing (3D printing)Experience with Earned Value Management (EVM)Proven experience interviewing engineering candidates for technical positionsEffective mentorship capabilities and experience conducting trainingStrong aptitude for resolving conflicts and supporting career development within the teamBackground in the Aerospace and Defense Industry, the US Department of Defense or US MilitaryAbility to motivate/work with othersProficiency with Microsoft Project Estimated Starting Salary Range: $165,010.21 - $226,889.04. Compensation varies depending on a wide array of factors, such as candidates' key skills, relevant work experience, and education/training/certifications. The disclosed range estimate may be adjusted for any applicable geographic differential associated with the location at which the position may be filled.SNC offers annual incentive pay based upon performance that is commensurate with the level of the position.SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE:This position requires the ability to obtain and maintain a Top Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. Citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!SNC is an Equal Opportunity Employer committed to an environment free of discrimination.Employment decisions are made based on merit without regard to race, color, age, religion, sex, national origin, disability, status as a protected veteran or other characteristics protected by law.

The pay range per hour is $24.25 - $41.25Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .ALL ABOUT TARGETWorking at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. ALL ABOUT PROPERTY MANAGEMENTProperty Management supports a profitable businessbyensuring that assets are well-maintained and functional, and services are completed on time while minimizing vendor cost. Property Management (PM)maintains physical assets and mitigates excess spend to ensure that our store teams can focus on serving our guests without distraction. PM also supports remodel efforts, executes new project sets and enables efficient front of store and backroom operations to delight our guests. At Target, we believe in our leaders having meaningful experiences that help them build and develop skills for a career. The role of a Property Management Lead can provide you with the skills and experience of:Working with vendors and influencing timely completion of their work Identifying and executing preventive and corrective maintenance on all building assets and equipment Influencing store team to ensure project work aligns with PM priorities and financial goals Working with Plumbing, HVAC, Refrigeration, Life Safety Power Systems and Electrical equipment Understanding repair versus replace and managing costCompleting work within compliance standards and Target guidelinesAs a Property Management Lead no two days are ever the same, but a typical day will most likely include the following responsibilities:Perform preventive maintenance on building assets and equipment, including Plumbing, HVAC, Refrigeration, Life Safety Power Systems and Electrical.Identify and perform corrective maintenance on building assets.Inform and engage the store leadership team (including new leaders) on property management workload priorities, and share impacts of store processes on asset care, maintenance and functionality.Lead and demonstrate a culture of executing all best practices as outlined within team onboarding and learning; help close skill gaps through development, coaching and team interactions.Use technologyto create and prioritize work orders.With Property Management Business Partner guidance, evaluate store brand and ensure assets and vendor performance meets maintenance standards.Assist in executing special projects, remodels and support PM asset andservice strategies in partnership with store team.Ensure internal and external work orders are completed efficiently and vendors are accountable for asset repairs.Assist in managing emergency situations as needed in partnership with store and field leaders.Follow appropriate safety procedures and training, use Personal Protective Equipment (PPE) and ensure a safe work environment by identifying and correcting equipment safety hazards.Teach and train store team to follow safety procedures.Demonstrate inclusivity by valuing diverse voices and approaches, being authentic and respectful, and creating equitable experiences.Model creating a welcoming experience by greeting guests as you are completing your daily tasks.All other duties based on business needsWHAT WE ARE LOOKING FORThis may be the right job for you if:You enjoy interacting and helping others - including guests that shop our store and fellow team members you work with. You thrive in a fast-moving, highly active and physically demanding role, where teamwork, flexibility, and creative problem solving are key to success. You are open to working a flexible work schedule with varying hours, days or shifts (including nights, weekends, holidays and other peak shopping times).The good news is that we have some amazing training that will help teach you everything you need to know to be a Property Management Lead.But,there are a few skills you should have from the get-go:Must be 18 years of age or olderHigh School diploma or equivalentBasic technical skills and general experience working with property assets required1–2 years of technical education preferred in some of the following areas: electrical, mechanical, carpentry, HVAC or plumbing and/or experience working in any of the following areas: basic door repair, HVAC filter changing, carpentry, power equipment/mechanical repair and basic equipment troubleshootingProficiency in operating power tools, HVAC, wet/dry vacuum and other poweredequipment Strong skills in managing vendor relationships, ensuring accountability, and achieving quality service resultsEffective communication skills and the ability to use technology and multiple communication devicesManage workload and prioritize tasks independently and provide support to store teamAbility to remain focused and composed in a fast-paced environment and accomplish multiple tasks within established timeframesWe are an awesome place to work and care about our teams, so we want to make sure we are clear on a few more basics that we expect:Climb up and down laddersApprehend subjects in accordance with company policy Scan, handle and move merchandise efficiently and safely, including frequently lifting or moving merchandise up to 40 pounds Flexible work schedule (e.g., nights, weekends and holidays); regular and prompt attendance necessaryCapable of working in and exposure to varying temperatures, humidity, and other elements while performing certain job duties including but not limited to Drive-Up, carryout, etc.Ability to remain mobile for the duration of a scheduled shift (shift length may vary).Benefits EligibilityPlease paste this url into your preferred browser to learn about benefits eligibility for this role: https://tgt.biz/BenefitsForYou_C | Pegue esta URL en su navegador preferido para obtener información sobre la elegibilidad de este puesto para recibir beneficios: https://tgt.biz/BenefitsForYou_CAmericans with Disabilities Act (ADA)Target will provide reasonable accommodations with the application process upon your request as required to comply with applicable laws. If you have a disability and require assistance in this application process, please visit your nearest Target store or reach out to Guest Services at 1-800-440-0680 for additional information.Application deadline is : 05/24/2025

If you're looking for the benefits of joining an industry leader, with a high-charged, energy-filled environment, then you can stop looking, because you have found what you're looking for in the Certified Automotive Technician position. Bring your energy, drive, and motivation to Hertz, and set your goals on cruise control! The Certified Automotive Technician is the top of our maintenance team with a focus on diagnostic and repair. This role will work to keep all equipment in running condition through our effective preventative maintenance program, as well as taking on the responsibility of handling complex repairs such as engine and transmission overhauls. This position is a master technician and assumes a leadership role with product knowledge and a standard of quality. Wage: $28.50 hourly Apply today and shift your career into drive for tomorrow! Not only do you get to be part of an organization where you Drive your Potential and Power your Passion you get major perks and discounts! Just to name a few Hertz perks: Up to 40% off the base rate of any standard Hertz rental Take advantage of Hertz negotiated discounts (Travel, Tickets- movies, concerts, theme parks, Electronics, Food, Fitness)Credit Union Access Health & Wellness benefits Tuition Reimbursement Pet Insurance Paid Parental Leave Career Growth with hands on learning Educational Background: High School Diploma or equivalent preferredTrade School PreferredASE Certified Professional Experience: At minimum three (3) years of vehicle maintenance experience Knowledge: Must be able to perform vehicle repairs without oversightAbility to repair vehicles independently, while also having experience working well in a team environmentExperience using shop equipment such as lifts, tire changing equipment, alignment machines, and scan tools Additional Notes: Must have tools to perform necessary repairsMust have a Valid Driver’s LicenseThe Hertz Corporation operates the Hertz, Dollar Car Rental, Thrifty Car Rental brands in approximately 9,700 corporate and franchisee locations throughout North America, Europe, The Caribbean, Latin America, Africa, the Middle East, Asia, Australia and New Zealand. The Hertz Corporation is one of the largest worldwide airport general use vehicle rental companies, and the Hertz brand is one of the most recognized in the world. US EEO STATEMENT At Hertz, we champion and celebrate a culture of diversity and inclusion. We take affirmative steps to promote employment and advancement opportunities. The endless variety of perspectives, experiences, skills and talents that our employees invest in their work every day represent a significant part of our culture – and our success and reputation as a company. Individuals are encouraged to apply for positions because of the characteristics that make them unique. EOE, including disability/veteran

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Job DescriptionOpen House Hiring EventWhen: Wednesday, May 7th, 1:00 pm - 5:00 pmAddress: 11700 E. 47th Ave, Denver, CO 80239Starting Rate:$42.30 / hourRate after 3 months: 44.42 / hourRate after 6 months: $45.63 / hourShift Differential:6%-8% of base hourly rate paid for applicable hours worked$5000 SIGN ON BONUS – Payable in two incrementsPRIMO BRANDS OFFERS A POTENTIALRELOCATION PACKAGE UP TO $7500 BASED ON COMPANY POLICYSchedule Monday – Friday, Full-Time, Day Shift Ability to work holidays and weekends per business needsOur Benefits Package 401(k) matching; uniform allowance; dental insurance; disability insurance; employee assistance program; employee discounts and perks; health insurance; health savings account; life insurance; paid orientation; paid time off; paid training; paid vacation; prescription drug insurance; safety equipment provided; vision insurance, Day 1 benefit enrollmentSkills Required Plan, lead, and execute preventative maintenance (PM) according to schedule to minimize equipment downtime Complete reactive maintenance on production lines to recover from equipment failures by repairing mechanical, electrical, and structural components Complete machine tear down/repair and assembly and work on PLCs, VFDs, and electric motors Conduct creative problem solving to identify and perform equipment improvements Coach and develop operators and peers on basic maintenance concepts and optimal equipment settings Facilitate seamless handoffs and communicate key information to peers, team members, and factory leadership team. Participate in special project work on equipment upgrades or installations Provide break relief to production operators or team members as needed Operate a forklift as needed to complete duties Support equipment installations, retrofits and upgrades to include vendors and contractors Troubleshoot/ investigate and repair all mechanical, electrical, pneumatic, and utility systems including chillers, air compressors etc. Ability to weld and fabricate to ensure equipment functionalityQualificationsQualifications High School Diploma, GED, or equivalent; technical training or certifications desired 5+ years of preventive maintenance and repair experience in a high speed industrial manufacturing environment Strong knowledge of pneumatics, electrical systems, and hydraulics required, with water processing experience desired. Proficiency in reading mechanical drawings and OEM technical prints for parts identification Electrical knowledge of single and three-phase power, with the ability to diagnose and replace electrical motors. Desired experience in Programmable Logic Control (PLC) Experience with compressors, chillers, water treatment, and boiler maintenance. Proficiency in Microsoft Office applications; Computerized Maintenance Management Systems (CMMS), ERP systems, SAP system experience preferred Independent professional with strong problem-solving, decision-making, and coaching skills. Effective communicator capable of fostering team collaboration and managing projects with minimal supervision. Physical ability to sit, stand, push, pull, climb ladders, and walk all day with or without reasonable accommodation. Must be able to perform physical inspections of equipment, which will require climbing, reaching, and extending arms overhead. Successful completion of the Mechanical Aptitude Test during the interview process. Flexibility to work holidays, weekends, and provide on-call coverage in our 24/7 facility is requiredPrimo Brands’ established portfolio includes billion-dollar brands Poland Spring® and Pure Life®, premium brands like Saratoga® and Mountain Valley®, regional leaders such as Arrowhead®, Deer Park®, Ice Mountain® Ozarka®, and Zephyrhills®, purified brands, Primo Water® and Sparkletts®, andflavored and enhanced brands like Splash® and AC+ION®. Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come.Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. If you need any assistance or accommodations due to a disability, please contact us at

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $23.25-38.75/hr.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: Troubleshoot and diagnose commercial HVAC units at our customers’ sites.Service commercial HVACChange compressors, fans and reclaim refrigerant. Have experience working with commercial rooftop and air package units as well as rack air condition units. Performs other duties as assigned. Qualifications: AA degree from an accredited vocational technical or junior collegeEPA certification requiredMinimum 3-5 years’ experience in construction HVAC, Refrigeration, or a related industryMust have chiller experience.Experience in troubleshooting electrical control systems is required Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

If you're looking for the benefits of joining an industry leader, with a high-charged, energy-filled environment, then you can stop looking, because you have found what you're looking for in the Automotive Technician position at our Hertz Rent-A-Car location. Bring your energy, drive, and motivation to Hertz, and set your goals on cruise control! The Hertz Corporation, a world leader in the car rental industry, currently seeks energetic team players to join our team. The Automotive Technician is the second level within the Hertz Corporation for our maintenance team. In this role you will be performing preventative maintenance, minor repairs, and inspection. Wage: $24.50 hourly Apply today and shift your career into drive for tomorrow! Not only do you get to be part of an organization where you Drive your Potential and Power your Passion you get major perks and discounts! Just to name a few Hertz perks: Up to 40% off the base rate of any standard Hertz rental Take advantage of Hertz negotiated discounts (Travel,Tickets- movies, concerts, theme parks, Electronics, Food, Fitness)Health & Wellness benefits Tuition Reimbursement Paid Parental Leave Career Growth with hands on learning Educational Background: High School Diploma or equivalent preferred Professional Experience: At minimum one (1) years of vehicle maintenance experiencePreferred prior experience with automotive repair (personal or professional) Knowledge: Must be able to perform vehicle repairs with oversightAbility to use shop equipment such as lifts, tire changing equipment, alignment machines, and scan tools Additional Notes: Must have tools to perform necessary repairsMust have a Valid Driver’s LicenseThe Hertz Corporation operates the Hertz, Dollar Car Rental, Thrifty Car Rental brands in approximately 9,700 corporate and franchisee locations throughout North America, Europe, The Caribbean, Latin America, Africa, the Middle East, Asia, Australia and New Zealand. The Hertz Corporation is one of the largest worldwide airport general use vehicle rental companies, and the Hertz brand is one of the most recognized in the world. US EEO STATEMENT At Hertz, we champion and celebrate a culture of diversity and inclusion. We take affirmative steps to promote employment and advancement opportunities. The endless variety of perspectives, experiences, skills and talents that our employees invest in their work every day represent a significant part of our culture – and our success and reputation as a company. Individuals are encouraged to apply for positions because of the characteristics that make them unique. EOE, including disability/veteran

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $25.24-42.07/hr.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time.Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectationsProvides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner.Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base.Test malfunctioning systems and components using electrical and/or mechanical skills.Maintain legible corporate and personal records of work history.Provides department support by processing job tickets, and work orders to the necessary department promptly.Provide support by picking up, delivering, and installing cases.Perform work on minor construction and remodeling projects including startups of new installations.Drives company vehicle in a safe manner.Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED.EPA certification.Certification from an accredited vocational-technical or trade school is a plus!Minimum 3+ years of commercial refrigeration experience required.Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus.Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.Must have a good driving record and be able to work independently.Emergency on-call availability is a basic requirement.Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems