Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: MV Transportation is seeking an Assistant Fleet Maintenance Manager toassist theFleetMaintenance Managerwithmanagement ofthe day-to-day maintenance aspects of the operation of CNG and propane vehicles. The Assistant FleetMaintenanceManager’s responsibilities will include, but not be limited to, assisting theFleetMaintenance Manager with the oversight of maintenance personnel, the organization of the maintenance yard and various administrative duties. The Assistant FleetMaintenanceManager shall be responsible for supervising the maintenance operation during shifts when the Fleet Maintenance Manager is not at the shop. Qualifications: Talent Requirements:Must be CDL licensed.Strong supervisory experience; must be able to supervise 30+ personnel.Must have the ability to track and control parts inventories, vendors and suppliers.Must be able to properly prioritize, implement and manage work schedules, projects and assignments.Must have the ability to manage the financial/accounting aspects of a fleet maintenance operation.Must be able to communicate effectively with all levels of staff in written and oral formats.Must have computer skills including word processing, spreadsheets and Microsoft Outlook.Must have technical competence with light/medium/Heavy duty vehicle repair and preventive maintenance.Must display initiative, professionalism, candor and tactat all times.Must have a minimum of three (3) years fleet/vehicle maintenance supervision experience.ASE Certified fortruck/transit preferred.Diesel experience required.Starting salary range: $90,000 - $104,000MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants.Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

WHAT WE DO As a premier provider of environmental services in the Western United States,Patriot Environmental Servicesprovides a wide range of industrial, emergency response and remediation services. We are committed to the principles of safety, superior customer service and experience, and unyielding quality and dedication. We provide a broad array of environmental services to meet any need that our clients may have. From emergency spill response to hazardous waste transportation to wastewater treatment, or from industrial cleaning to full facility closure and remediation, Patriot can do it all with our own internal resources and do so while accomplishing every metric of success. Our mission is to always be Prepared and Professional. Join the team that makes a difference! DUTIES AND RESPONSIBILITIES Ensure that Health and Safety is the number one priority by complying with all safe work practices, policies, processes, and acting in a safe manner.Perform emergency response cleanup activities including but not limited to chemical and water spills, non-hazardous and hazardous waste and toxic materials and equipment decontamination.Sweep, dig, shovel, lift, pressure wash and handling drums to assist in cleanup.Operate cleanup equipment used in hazardous waste activities.Follow policies and procedures for control and storage of hazardous substances.Attend safety training as required.Comply with the Random Drug Testing Program.Perform various housekeeping and custodial duties and other duties as required.Assist with maintenance of facility like unloading trucks and other ancillary duties.Answer 24/7 Emergency Response calls when on uncontrolled standby.Work long hours and overtime during day, night or weekend shifts.Other reasonable directives, responsibilities and activities may change or be assigned at any time with or without notice. EXPERIENCE, EDUCATION AND REQUIREMENTS High school diploma or GED preferred.Some environmental services industry experience preferred.Some hazardous waste control experience preferred.Valid driver’s license required.Driving record that meets company standards and current DMV printout, required.40-hour HAZWOPER certification required.Confined Space Entry certification preferred. SKILLS AND COMPETENCIES Strong attention to detail; meticulous.Safety conscious.PatientFlexible to fast paced changes. PHYSICAL DEMANDS AND ENVIRONMENTAL CONDITIONS Pushing / pulling: frequent daily basisTwisting / turning: frequent daily basisLift items over head: frequent daily basisStanding: 6-8 hours dailyCrouching / stooping: prolonged periodsLifting / carrying: frequent daily up to 50 lbsWork in confined spaces or at heights.Required to wear a variety of personal protection equipment as required including but not limited to Tyvek suits.Required to wear respirators as needed.Performs labor intensive activities in all weather conditions during any hours during the day or night. BENEFITS PTO, paid holidays, sick timeMedical, dental, vision, life insurances401(k) with company matching Pay: $18 - $25 per hour The compensation for the role will depend on several factors, including the candidate's qualifications, work experience, competencies, and skills, and may fall outside of the range shown. Patriot Environmental Services is an equal opportunity employer (EOE) Check us out online atwww.patriotenvironmental.com

Company Description: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere.At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown’s history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them.From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward.We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team.Want to Learn More Watch A Day in the Life of a Crown Field Service Technician! click hereJob Posting ExternalJob DutiesTroubleshoot, diagnose and repair Crown and all other makes of lift trucks.Perform all assigned planned maintenance on customer lift trucks.Maintain a service van and its inventory.Process paperwork after completion of each job.Minimum QualificationsLess than 2 years related experienceHigh school diploma or equivalentValid driver's license, good driving record, and ability to safely operate lift trucks.Preferred QualificationsGood mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics.Good written/verbal communication and customer care skills.Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred.Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment.Industry related training is preferredAbility to read and understand service manuals, plan, and follow-throughWork Authorization:Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire.No agency calls please.Compensation and Benefits:Crown offers an excellent wage and benefits package for full-time employees. Current benefits being offered include:Competitive Wages. The anticipated starting pay range for the position is$33.00 to $36.00;but is commensurate withskills and related experience,Health/Dental/Vision/Prescription Drug Plan with a company contribution to each,Health Savings Accounts and Flexible Spending Accounts,401K Retirement Savings Plan:Crown matches 100% of the first 4% of your eligible pay you contribute to the plan.You are always 100% vested in the company matching contributions.Company paid Life and Disability Benefits as well as optional supplemental term life insurance offerings,Paid Parental Leave,9 Paid Holidays,Paid Vacation accrued at a rate based on length of service and position,Paid Sick Leave,Birthday Pay for Non-Exempt employees,Tuition Reimbursement up to $5,250 per calendar year,and much more.Crown also offers Service Technicians:Award-Winning Service TrainingCompany Vehicle for Field Service TechniciansTool InsuranceNo Flat Rate40 Hours Per Week plus OvertimeUniformsSpecialty ToolsPrimarily 1st ShiftCareer Advancement OpportunitiesEOE Veterans/DisabilitiesWe will consider for employment all qualified Applicants, including those with Criminal Histories, in a manner consistent with the requirements of applicable state and local laws, including California AB-1008 “Ban the Box”, San Francisco’s Fair Chance Ordinance and the City of Los Angeles’ Fair Chance Initiative for Hiring Ordinance.

Overview: At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation:Competitive pay from $30 - $48 hr and sign-on bonuses up to $3,000 DOE!!Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: The HVAC/R Technician role is primarily responsible for performing repairs and maintenance to a variety of HVAC and Refrigeration equipment including air conditioning, electric motors, heating units, heat pumps, hermetic compressors, commercial furnaces, boilers, burners, intake and exhaust fans, economizers and humidifiers, RTUs, remote condensing units, ice machines, walk-in coolers & freezers, and upright refrigerators & freezers. Qualifications: 3+ years of commercial experience as an HVAC and Refrigeration TechnicianActive EPA CertificationValid driver's licenseExcellent customer relations and interpersonal skillsMechanical aptitude and troubleshooting skillsAbility to safely lift up to 50 lbs., climb and balance on a ladder, and work in elevated/high locations. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

The Maintenance - Mechanic provides advanced mechanical support. Performs a variety of complex technical tasks with mechanical systems.Primary Responsibilities:Performs moderately complex technical functions related to the support of developing engineering activities, such as: Repairing, maintaining, overhauling, modifying, operating and material handling equipment.Installing, dismantling and inspection of electrical, electronic, mechanical, HVAC, and material handling equipment and fixtures.Diagnosing and solving electronic and/or mechanical problems involved in the operation of the system.Recommending modifications to designs as needed.Assists other technicians in the performance of mechanical maintenance activities and/or providing training/guidance.Fabricates mechanical system components, parts and equipment, etc.Isolates malfunctions using established tools and techniques, performs preventive and corrective maintenance on equipment, and returns faulty equipment to operating condition.Logs scheduled inspection reports of the operating equipment, fixed building equipment and building structures, maintenance, repairs and other records and schedules.Actively develops skill blocks to improve personal performance.Core Competencies & Accomplishments:Requires application of special skill, knowledge and pertinent techniques to work assignment.Requires advanced aptitude and experience in various areas of maintenance.Solid understanding of mechanical systems and related components.Requires license to operate mechanical equipment.Advanced knowledge of the principles, methods and techniques used in the fabrication and testing of mechanical components and troubleshooting.Specified license and certifications required.Three years of experience in mechanical field or combination of experience and technical/vocational training.What you get:If eligible, we offer a competitive benefits package including medical/dental/vision, term life insurance, paid vacation/holidays*, and 401(k) with Company match. All associates are eligible for an associate discount on JCPenney merchandise. *For paid vacation days, as well as eligibility requirements for other benefits, please visit About JCPenney:JCPenney is the shopping destination for diverse, working American families. With inclusivity at its core, the Company's product assortment meets customers' everyday needs and helps them commemorate every special occasion with style, quality, and value. JCPenney offers a broad portfolio of fashion, apparel, home, beauty, and jewelry from national and private brands and provides personal services including salon, portrait and optical. The Company and its 50,000 associates worldwide serve customers where, when, and how they want to shop - from jcp.com to more than 650 stores in the U.S. and Puerto Rico. In 2022, JCPenney celebrates 120 years as an iconic American brand by continuing its legacy of connecting with customers through shopping and community engagement. Please visit JCPenney's Newsroom to learn more and follow JCPenney on Facebook, Instagram, Twitter, and LinkedIn.Pay RangeUSD $26.40/Hr -USD $33.00/Hr.

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:This position performs aircraft maintenance on UPS fleet to meet or exceed airworthiness standards. Performs the change, removal, replacement, or upgrade of aircraft components to correct failures or implement changes. Conducts troubleshooting of complex pneumatic, hydraulic, engine, and structural components and systems. This position documents procedures per established processes to ensure regulatory compliance.Job Responsibilities Responsible for the maintenance and preventive maintenance of aircraftOperate and maintain UPS equipment safelyRun, taxi, and tow aircraft for the purpose of maintenance and repositioning of aircraft as trained and qualified to do soDetermines airworthiness of aircraft and components, in accordance with established procedure and Federal Aviation RegulationCompletes aircraft maintenance forms entries and enters data into a Maintenance Data Systems, ensures entries are accurate and completeServices and inspects aircraft, components, and related equipmentEnsure consistent, accurate aircraft maintenance by properly completing turnover entries on unfinished maintenance in the turnover logFollow all Maintenance Department policies and proceduresKeep a clean and orderly work environmentMake recommendations to improve functions within the Maintenance DepartmentAttend UPS assigned trainingPerform other duties as assigned by Line Maintenance Supervisor or the Director of MaintenanceRequired QualificationsMust have a High School Diploma or GED equivalent Must have a valid FAA Airframe and Powerplant license Must have a valid driver’s license Must have a minimum of three (3) years aircraft maintenance experience that could include but not limited to: Boeing, Airbus and/or McDonnell Douglas aircraft Military jet aircraft Regional /Commuter aircraft Knowledge of computer systems Troubleshooting skills and ability to read and interpret Aircraft Manuals and Illustrated Parts CataloguesFederal Aviation Administration required Drug Testing Information (FAA):As part of the UPS pre-employment process for a safety sensitive position, a drug screen is required. UPS Must receive a negative test result before you can be put into a safety sensitive position (14 CFR Part 120.107).Please be advised that you will be tested in accordance with 14 CFR Part 120.109(a)(5) and 14 CFR 120 Subpart E to determine the presence of marijuana, cocaine, opiates (including codeine, heroin-6AM, morphine), opioids-hydrocodone, hydromorphone, oxycodone & oxymorphone, phencyclidine (PCP), and amphetamines/methamphetamines (including MDMA, MDA) or metabolites of these drugs.Starting Pay:$30.13Benefits: Competitive weekly payMedical, dental, and vision after waiting periodDefined-benefit pension plan401(k)Paid vacationPaid holidaysPaid Sick and Family and Medical Leave time as required by lawDiscounted Employee Stock Purchase Program Employee Assistance Program*This job post is for BUR gateway only*Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.Pay Range:For this union-represented posting, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. The starting pay rate for this position starts at $30.13/hr. The company offers the following benefits for this position, subject to applicable eligibility requirements. Weekly pay, extensive training, growth opportunities, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, education assistance program, discounted employee stock purchase program.

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits ! Would you like to work with a company that invests in your growth Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are:As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary.What’s in it for YOU:Competitive Pay Rates! 40 hours a week, not flat rateOT as needed over 40 hoursPaid vacationCompany provided uniformCorporate partner discount programCareer advancement through a national companyDuties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components.Perform scheduled preventative maintenance of vehiclesExecute major and minor repairs of defective components.Document all activities in MV’s Fleet Management System.Maintain work environment in an organized and safe condition. Qualifications: Talent Requirements:High school diploma or equivalent.Combination of at least five (5) years of apprentice level verifiable training and experience in Fixed route CNG mechanics, which may include high school mechanics courses and/or a regional occupational program.Must be able to pass a pre-employment drug screen and random drug testing.Starting pay rate: $37.00 - $39.00, based on experience and qualificationsMV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation:Competitive pay from $32.00 - $60.00 hr range and sign-on bonus up to $5,000 DOE!!! .Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time.Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectationsProvides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner.Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base.Test malfunctioning systems and components using electrical and/or mechanical skills.Maintain legible corporate and personal records of work history.Provides department support by processing job tickets, and work orders to the necessary department promptly.Provide support by picking up, delivering, and installing cases.Perform work on minor construction and remodeling projects including startups of new installations.Drives company vehicle in a safe manner.Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED.EPA certification.Certification from an accredited vocational-technical or trade school is a plus!Minimum 5+ years of commercial refrigeration experience required.Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus.Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.Must have a good driving record and be able to work independently.Emergency on-call availability is a basic requirement.Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Overview: Physical Therapist "I have the freedom to treat patients the way I prefer to treat them. Our company does everything to promote continuing education and anything we can do to better our patients. We also do that while having fun at work every day, making our patients feel comfortable in the clinics." - ADRIA SALDIVAR, PT, DPT, LATCJob Type: Full-time Salary: $82,000 - $100,000/ Year Job Location: Palmdale, CaliforniaUp to $5,000 in Sign-on bonuses available How Confluent Health Supports You: Student loan repayment programFully paid trainings, certifications and education programs through Evidence in Motion (EIM) A focus to create a diverse, equitable, and inclusive workplace culture Comprehensive mentorship and career development Leadership and talent development opportunities Generous Paid Time Off Industry leading Medical, Dental, Vision, LTD insurances 401(k) Employer Matching Family Building and Parental Benefits Responsibilities: Reviewing patients medical history Provide excellent 1:1 care for your patients, spending an average of 40 minutes with each person (optional – only use if your brand emphasizes time spent with patients)Diagnosing patients by observing their movements and listening to their concerns Developing individualized treatment plans for patients with clear goals and expected outcomesUsing exercises, stretching, equipment, and hands-on manual therapy to manage patients’ pain, increase mobility, and prevent further pain and injury Recording patient progress and modifying the plan of care as needed Qualifications: Physical Therapist Licensure in good standing in California CPR and first aid certification required #CH500

Job SummaryUnder limited supervision, the Production Supervisor is responsible for overseeing, planning, organizing, and coordinating employee activities for the safe production of material in the cement plant. BenefitsCalPortland is proud to offer a comprehensive, competitive benefits package that provides health and financial support to our most important resources: our employees. Your benefits are an important part of your overall compensation at CalPortland. That’s why we give you a wide range of benefits to choose from.Medical, Dental, Visionlow-cost premiums even for family coverageCompany-paid life/AD&D insuranceCompany-paid short-term disabilityPaid sick/vacation/holiday401k/Company Funded Pension Program (program is dependent upon location and job type)Employee Assistance Program (EAP)Additional voluntary benefitsCompensation$80K - $100K annually/DOEResponsibilitiesEnsures that safe work procedures and safe work conditions are practiced and maintained; promotes proper safety and accident prevention attitudesResponsible for optimum production rates from all clinker and cement production equipment; works with the laboratory to ensure all mills are operated within the standard quality parameters set, and directing flows to the appropriate finish or raw siloResponsible for the accurate diagnosis of malfunctions on all systems; works with Maintenance Department in prioritizing and formulating course of action to correct such problemsDirects and supervises the deliveries of all bulk materials entering the plant; ensures that these deliveries are placed into the correct silo or appropriate storage areaRecords shift events on log sheets, documenting all pertinent changes, or circumstances; reports major malfunctions to Production Superintendent Administer the Company work rules in a fair manner; set standards for quality and quantity of work and initiate appropriate disciplinary measures when infractions occurExhibit excellent interpersonal skills to facilitate positive working relationships with all levels of management and staffAbility to direct, motivate and coach activities of othersAbility to exercise sound judgment in problem-solvingExhibit excellent work ethic – high standard of performance and productionEducationHigh school diploma or GEDRequirements/QualificationsRequires 2 years of supervision experienceThorough knowledge of cement production, safe work practices, and MSHA regulationsExcellent computer and organizational skills; willing to effectively learn Windows, Excel and other softwareAbility to formulate decisions, makes and supports recommendations, prioritize work, communicate with multiple parties and handle multiple tasksAbility to be cleared with federal ATF to transport, ship, receive or possess explosive materialsTask and project-orientedAbility to work with all levels of managementKnowledge of all types of equipment used in the manufacturing of cementKnowledge of hazards associated with areas of responsibilityExercise independent decision-making, prioritize conflicting demandsStrong administrative, interpersonal, and communications skillsMust be able to read, write, and verbally communicate in the English language, communicate positively with employees, customers, and vendors at all levels; ability to read and understand equipment manuals, company policy manuals and require government regulationsMust be able to see and hear safety indicators and warningsAbility to walk on all types of surfaces (uneven and/or slippery ground), climb stairs and ladders as high as 200 ft. in elevation; physically able to climb on equipment to provide supervision during work, walk long distances, climb ladders, stairs and stockpiles, stoop, and crawl under and into enclosed spacesDrive automobile to various plant sites and work locations; must be able to travel overnight (air/auto)Preferred:Working knowledge of SAP ProductionExperience working with a union contractUnderstanding of California state labor laws related to wage and hourExperience working in a manufacturing or cement facilityConditions of EmploymentSuccessful candidate must submit to post-offer pre-employment physical examination, drug/alcohol screen, and background check. Some positions require FMCSA regulated on-going drug and alcohol testing.#LI-BB1