Haleyville, AL • (37.5 miles) • Full Time • 10/28/2026

Job Title: Assembler Job Description This role focuses on assembling trailers and related equipment by installing non-welded parts and decals and performing system diagnostics checks. You work as part of an all-hands-on-deck team where you support a variety of production tasks as needed. The position is physically demanding and involves hands-on mechanical assembly, general labor, and use of hand and power tools on a busy production floor. Responsibilities Install all non-welded parts and decals on trailers and related products according to specifications and quality standards. Perform complete systems diagnostics checks to ensure proper functionality and safety of assembled units. Carry out light installation work, including floor installation and other interior or exterior components on

Reform, AL • (36 miles) • Full Time • $25.00 to $30.00 / hr • 10/27/2026

INDUSTRIAL ELECTRIC IAN Automation Personnel Services is looking for an Industrial Electrician for a company based in Reform, AL. In this role, you will be responsible for installing, repairing, andmaintainingelectrical wiring andother electricalcomponents. Pay Rate $25.00 to $30.00 per hour Schedule and Hours Monday through Friday, 7 00 am to 4 00 pm. Industrial Electrician Duties and Responsibilities • Install new wiring systems. • Diagnose and repair electrical issues. • Maintain clean work environment. • Complete all processing paperwork and reports. •Follow safety regulations and guidelines, including wearing appropriate personal protective equipment. Industrial Electrician Qualifications and Requirements • Advanced knowledge of modern electrical systems •Experience operatingelectrica

West Point, MS 39773 • (36 miles) • Full Time • $25 to $26 / wk • 10/23/2026

NOW HIRING – Industrial Fab Shop Electrician Location: West Point, MS Pay: $23.00 - $26.00 per hour (based on experience) Schedule: Full-Time | Overtime Available We are seeking a skilled Industrial Fab Shop Electrician to support the fabrication, assembly, wiring, and testing of industrial electrical systems and control panels. This position is ideal for electricians with experience in industrial manufacturing, automation, control panel fabrication, and equipment integration. Job Responsibilities Assemble and wire industrial control panels and electrical enclosures Install and terminate power, control, and instrumentation wiring Read and interpret electrical schematics, blueprints, and wiring diagrams Install electrical components including relays, PLCs, VFDs, disconnects, and terminal bl

Columbus, MS • (31 miles) • Full Time • $50,000 to $68,000 / yr • 10/23/2026

Industrial Maintenance Technician Job Summary We are seeking a skilled Operator/Maintenance Technician to join our team. The Operator is responsible for all daily monitoring and functions required to operate and maintain the business of supplying compressed air and hydrogen by pipeline to the designated client pursuant to in place contract requirements. The ideal candidate will be responsible for ensuring the daily operations, upkeep and repair of machinery and equipment in our facility. Industrial Maintenance Technician Duties -Run daily Operations to maintain product to client - Perform routine maintenance on machinery and equipment - Troubleshoot mechanical issues and repair as needed - Conduct electrical repairs and installations - Collaborate with the team to address maintenance needs

West Point, MS 39773 • (36 miles) • Full Time • $17.00 / hr • 10/17/2026

The Wire Harness Assembler is responsible for the fabrication, assembly, and inspection of wire harnesses and cable assemblies in support of both defense and commercial contracts. This position requires the ability to read and interpret engineering drawings, wiring diagrams, wire lists, and assembly schematics. Work is performed in compliance with applicable quality standards including IPC/WHMA-A-620, MIL-SPEC requirements, and internal quality management system procedures. Key Responsibilities ASSEMBLY & FABRICATION Fabricate wire harnesses and cable assemblies from engineering drawings, wire lists, wiring diagrams, and schematics. Cut, strip, crimp, solder, and terminate wires to specified lengths and connector configurations per print requirements. Install and secure connectors, contact

Columbus, MS 39701 • (39.8 miles) • Full Time • 10/14/2026

Industrial Maintenance Electrician (Senior) Columbus, MS. Full-time R&D Maintenance Services, Inc. – Tennessee Tombigbee Waterway R&D Maintenance Services, Inc. provides operations and maintenance services on U.S Army Corps of Engineers (USACE) projects throughout the southeast - since 1980. We are the Operations and Maintenance Contractor for the Tennessee Tombigbee Waterway Project providing machinery and facility maintenance and repair on nearly 200 miles of waterway and 10 locks/dams/spillways on the system. Position is based in Columbus, MS. R&D is an EEO Employer. General Description: Performs the full range of electrical work including inspection, troubleshooting, maintenance, and repair of complex electrical and electromechanical systems that operate river navigation, flood control

Shannon, MS • (35.9 miles) • Full Time • 10/23/2026

Position: Sewing Quality Control Pay: $15.00/hour Shift: Monday–Friday, 7:00 AM–2:30 PM Location: Tupelo, MS Integrity Trade Services is hiring a Sewing Quality Control to start IMMEDIATELY at $15.00/hour. Receive comprehensive benefits through ITS upon hire! Responsibilities Inspect garments and products for defects such as loose threads, missed seams, and uneven stitching Follow work orders and specifications to maintain consistent stitch quality Ensure all items are correctly measured, aligned, and assembled Perform quality checks on finished products Maintain a clean and safe work environment while meeting daily production goals Qualifications Sewing experience preferred (industrial, garment, or manufacturing) Ability to stand for long periods and perform repetitive hand motions Strong

Hackleburg, AL 35564 • (30.1 miles) • Full Time • $100,000 to $150,000 / yr • 10/17/2026

Title: Electrical Engineer – High Power Microwave & Pulsed Power Systems Position Summary: We are seeking a graduate-level Electrical Engineer to support the development, integration, and testing of advanced high-power microwave (HPM) and pulsed-power systems. The engineer will work as part of a multidisciplinary team developing technologies associated with prime power, pulsed-power generation and conditioning, RF generation, impedance matching, transmission, and antenna systems. Responsibilities will include supporting the design, modeling, fabrication, integration, and laboratory/field testing of electrical and RF hardware, including systems utilizing conventional and explosive-driven pulsed-power technologies. The position will involve hands-on experimental work with high-voltage, high-

Fayette, AL 35555 • (23.3 miles) • Full Time • 10/15/2026

Duties: Sand and prep dump bodies. Prime and undercoat all dump bodies and parts. Spray paint the dump bodies and parts. Mix paint for special colors, when needed. Coordinate movement of dump bodies. Dispose of hazardous material in accordance with EPA regulations. Touch up dump bodies, as needed. Cross train with chipper/blaster. Using jib crane, sanders, paint spray equipment, paint mixing equipment and forklift; move materials into proper position. Perform routine preventive maintenance on equipment as assigned. As a condition of employment, work all assigned days and overtime as required. You must wear all the PPE required. Complete the annual Hazardous Materials training, if overseeing weekly inspections. Other duties as assigned. Qualifications: Educational : High School Diploma or G

Columbus, MS • (31 miles) • Full Time • 10/28/2026

Controls Engineer Fives DyAG Corp. is looking for a Controls Engineer to join our team based out of our Columbus, MS area. Fives DyAG's engineers work in a variety of environments and locations. The role requires strong technical knowledge, sound experience and people-skills, to effectively solve issues as they arise. Job Description: Creating and commissioning industrial controls systems, PLC software design, and HMI screens, for different industries and environments. Responsible for PLC/HMI code development, code installation, debug on job site, and commissioning of the complete system. Conducting the peripheral device programming, machine PLC programming, coordinate the machine debug, power-up, and machine validation with build and electrical teams. Ensure that systems are designed and

Columbus, MS • (31 miles) • Full Time • 10/28/2026

Job Description: Sr. level Siemens PLC programmer (TIA Portal) We offer attractive, competitive compensation and benefits including, medical, dental, 401k, short-term disability, AD&D, tuition reimbursement, and more. If you take pride in your work and are committed to personal and professional success, let's talk. Please visit www.zobility.com to learn more. Zobility is RGBSI's workforce management and staffing division. RGBSI is a multi-national corporation headquartered in Troy, MI with branches throughout the USA, Canada, Germany, and India.

Columbus, MS • (31 miles) • Full Time • $44.00 to $53.00 / hr • 10/28/2026

Job Title: Controls Engineer Siemens Job Duration: 5 months contract Est. Pay Range: $45 to $52/hr on w2 Work Type: On Site (1st shift, 40 hours/week) Overview/ Responsibilities: We are looking to add a Controls Engineer who has senior level experience with Siemens PLCs. They will primarily be working with TIA Portal and must be able to program from scratch. The project is anticipated to be at least 5 months onsite in Columbus, MS. 1st shift, 40 hours/week. We cannot pay for expenses.

Tupelo, MS 38801 • (43.7 miles) • Full Time • 10/24/2026

Do you want to be part of a team that aspires to improve the quality of life for others? Are you interested in efficient manufacturing processes that promote sustainability? Do you feel a sense of accomplishment in a job well done? At Carpenter Co., we challenge our employees to learn from and inspire one another – all levels of the company collaborate, communicate, and constantly improve to achieve shared success. If that sounds like an environment in which you will thrive, Carpenter Co. could be a great fit for you! Carpenter Co. has an immediate opening for a 1st Shift Electronic Technician A at our Tupelo/Verona, MS manufacturing plant. This position is responsible for maintaining all building machinery including troubleshooting, repairing, testing, and installing electrical and electr

Columbus, MS • (31 miles) • Full Time • $26.00 to $29.00 / hr • 10/20/2026

Job Responsibilities: Responsible for performing a broad range of inspection and quality assurance activities across the organization, including: Inspect and approve incoming materials by verifying specifications, conducting visual and dimensional measurements, and rejecting nonconforming items in accordance with company quality procedures, work instructions, policies, and customer requirements. Monitor in-process production by confirming specifications, performing visual and measurement inspections, and communicating required adjustments to production supervisors and personnel. Inspect and approve finished products by verifying specifications, performing required tests, issuing Certificates of Conformance (COCs), and coordinating rework and re-inspection as needed. Document inspection res

Verona, MS 38879 • (39.6 miles) • Full Time • 10/19/2026

Reports To: Quality Engineer Department/Group: Quality Travel Required: Minimal Level/Salary Range: US$ 40k – 47k per year Position Type: Full Time Job Description/Summary QTech will support daily production activities by providing immediate hands-on resolution and/or quality functions as required. As a constant present on the production floor, the QTech is a quality first responder, a proactive assessor as well as an excellent communicator. The QTech is the keeper of the Quality System in practical application, consistently assessing compliance and performance. Role and Responsibilities Provide quality assurance support for manufacturing by performing, but not limited to, the following activities: · Ensure established quality process is effectively utilized and address deficiencies in com

Shannon, MS 38868 • (38.9 miles) • Full Time • 10/15/2026

Responsible for monitors and/or verifies food safety and quality of products and processes per company guidelines. The QA Tech enforces employee GMPs and safety practices as well as monitors sanitation and the condition of equipment and facility. Also, performs other tasks as necessary to safeguard the interest of the Raybern Quality Foods. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Monitor and/or verify HACCP Plan and CCP’s SQF responsibilities including but not limited to documentation, inspections, auditing, validation and verification of processes, standards, work instructions, SOP’s, specifications, policies and practices Perform quality testing on finished products to ensure compliance to standards, and specifications Monitor equipment and facility sanitation Monito

Columbus, MS 39701 • (39.8 miles) • Full Time • 10/13/2026

Description: Core Industrial Maintenance is looking for an experienced Millwright to join our talented team of skilled tradespeople. We are looking for someone that understands inspecting, repairing, and maintaining industrial machinery. This position will require the millwright to work in a variety of environments and frequent travel to customer sites. Disassemble and reassemble equipment for repair or transportation. Build the foundation for machines. Construct and install equipment such as shafting, conveyors and tram rails. Review and interpret engineering specifications, schematics, and blueprints to determine work procedures. Transfer equipment to the applicable site for maintenance to avoid contamination or safety hazards. Grind and file machinery parts. Supervise construction worke

Reform, AL • (36 miles) • Full Time • 10/28/2026

MACHINE OPERATOR Automation Personnel Services is looking for a Machine Operator for a company based inReform,AL.Inthisrole, you willhave the opportunityto work for a local industrial company that specializes in wood products. Pay Rate $18.00-19.00per hour Schedule and Hours Days vary,600 am to600 pmor 6 00 pm to 6 00 am. Machine Operator Duties and Responsibilities •Set up, operate, or tend woodworking machines, such as drill presses, lathes, shapers, routers, sanders, planers, and wood nailing machines. •Cross-trainon different machinery. •Operate CNC equipment as needed. •Perform other duties as assigned. Machine Operator Qualifications and Requirements •Mechanically inclined and previous machine operation experience required. •Prior experience working in a manufacturing setting. •Abili

Plantersville, MS • (37.9 miles) • Full Time • 10/1/2026

Position: Industrial Sewing Machine Operator Pay: $14.00/hour Shift: Monday–Friday, 5:00 AM–2:00 PM Location: Tupelo, MS Integrity Trade Services is hiring an Industrial Sewing Machine Operator to start IMMEDIATELY at $14.00/hour. Receive comprehensive benefits through ITS upon hire! Responsibilities Sew bedding components (covers, panels, borders) using industrial sewing equipment Follow work orders and specifications to ensure stitch quality and consistency Measure, align, and assemble materials accurately Inspect finished products for defects such as loose threads or missed seams Perform basic machine tasks like threading, needle changing, and minor adjustments Qualifications Sewing experience required , especially in industrial or bedding sewing; open to candidates with strong sewing s

Columbus, MS • (31 miles) • Full Time • 10/28/2026

Job Description: Looking for a Controls Engineer to join our team based out of our Columbus, MS area. Client Engineers work in a variety of environments and locations. The role requires strong technical knowledge, sound experience and people-skills, to effectively solve issues as they arise. Responsibilities: Creating and commissioning industrial controls systems, PLC software design, and HMI screens, for different industries and environments. Responsible for PLC/HMI code development, code installation, debug on job site, and commissioning of the complete system. Conducting the peripheral device programming, machine PLC programming, coordinate the machine debug, power-up, and machine validation with build and electrical teams. Ensure that systems are designed and programmed to customer and

Shannon, MS 38868 • (38.9 miles) • Full Time • 10/24/2026

SUMMARY : Operate production machinery and troubleshoot when needed. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Responsible for the set up and operation of the machine within accepted safety practices and the allotted time frame. Properly perform necessary setting adjustments. Properly perform film changes and ribbon changes including changeover from one dye to another. Ensure the products have the correct components before packing them. Continuously check the label, seals and date placement throughout the shift to ensure that every package label and date is correct. Fill out and sign all required documentation before each run. Monitor equipment operation to prevent unscheduled downtime. Communicate effectively with Production Supervisors, Production Leads and other Packa

West Point, MS 39773 • (36 miles) • Full Time • $90,000 to $100,000 / yr • 10/17/2026

Job Summary Electronics manufacturing engineer that will assist with new product launch in our electronics assembly department. The candidate should have experience with IPC Standards, product testing, and BOE creation for circuit card assemblies and wire harnesses. Job Responsibilities Assist with basis of estimate creation by providing manufacturing flow times according to contractual requirements. Develop technical documentation, including work instructions and engineering drawings to support manufacturing operations. Assist in the development of jigs, fixtures, and manufacturing aids. Assist in the development of electronics manufacturing processes that adhere to ISO 9001 certification standards such as ESD, FOD, and material storage procedures. Optimize assembly line layouts to maximi

Verona, MS 38879 • (39.6 miles) • Full Time • 10/10/2026

Position Overview: The Manufacturing Engineer will work independently and/or in collaboration with others to develop systems, processes, fixtures, and machines that result in the manufacture of high-quality products. Additionally, the ME would be a contributing part of continuous improvement, safety, and other operational initiatives. Main Duties and Responsibilities: Process Design & Improvement Design, develop, and optimize manufacturing processes to improve efficiency, quality, throughput, and safety. Analyze production workflows and implement process improvements using continuous improvement methodologies. Production Support Provide daily engineering support to manufacturing operations, troubleshooting production issues and minimizing downtime. Collaborate with supervisors, maintenance

Columbus, MS 39701 • (39.8 miles) • Full Time • 10/10/2026

Description: Coordinating daily tasks according to priorities and plans, making changes when necessary due to weather, supply, delivery and personnel Delegating individual responsibilities and projects to crew members and contractors Coordinating with business leaders for recruiting, hiring, training, managing and mentoring employees and contractors Providing adequate resources and staffing to meet project schedules, laws, regulations, best practices and safety needs Emphasizing safe use of tools, machinery and equipment while providing training on safety gear, helmets and procedures Developing and managing project budgets and quality standards for all sites Resolving conflicts or miscommunications quickly and amicably Regularly reporting project status to supervisors, site engineers and o

Columbus, MS • (31 miles) • Full Time • 10/29/2026

Hoist Technician Automation Personnel Services is looking for a Hoist Technician for a company based in Columbus,MS.Inthisrole, you willhave the opportunity towork with a long-lasting machine and maintenance facility. Pay Rate $25.00 to 34.00per hour Schedule and Hours Monday through Friday, 800 am to 500 pm. Hoist Technician Duties and Responsibilities •Controlling levers, pedals, and throttles to control the start, stop and speed of hoist/winch drums. •Wind and unwind cables, select loads based on weight/size specifications, and ensure heavy components are placed precisely. • Transport materials to designated locations within the facility, maintaining inventory accuracy and organization. • Inspect and maintainfuel tanks, lubricate equipment, and apply hand and foot brakes to secure hoist

Columbus, MS 39701 • (39.8 miles) • Full Time • 10/3/2026

Description: Core Industrial Maintenance is looking for an experienced Industrial Maintenance Technician to join our talented team of skilled tradespeople. We are looking for someone that understands multiple different types of welding techniques and proper applications of those skills in an industrial setting. This position will require the Technician to work in a variety of environments, in a variety of functions, and frequently travel to customer sites. General Responsibilities could include: Disassemble and reassemble equipment for repair or transportation. Construct and install equipment such as shafting, conveyors and tram rails. Review and interpret engineering specifications, schematics, and blueprints to determine work procedures. Determine which machines, techniques, and tools to

West Point, MS 39773 • (36 miles) • Full Time • $90,000 to $100,000 / yr • 10/3/2026

Job Summary The Quality Engineer is responsible for driving overall product and process quality within the manufacturing plant while serving as the primary customer interface for quality related matters. This role provides hands on support to production operations, leads root cause investigations, mentors quality team members, and ensures compliance with ISO and MIL requirements. The position requires a strong technical leader who can operate effectively on the plant floor while also managing customer communications and driving measurable quality improvements. Responsibilities Primary point of contact for all customer correspondence relative to quality objectives, quality Provide daily quality support to production operations. Lead 8D investigations and drive corrective and preventive acti

Columbus, MS • (31 miles) • Full Time • 10/1/2026

MANUAL MACHINIST Automation Personnel Services is looking for a Manual Machinist for a company based inColumbus,MS.Inthisrole, you willhave the opportunity towork for a company thatoffers a wide range of services and resources including a full-service machine shop. Pay Rate $25.00 to $34.00 per hour Schedule and Hours Monday through Friday,730 am to400 pm. Manual Machinist Duties and Responsibilitie s Interprets blueprints, sketches, and engineering specifications; determines sequence of operations, number of cuts required, and method of setup. Set up, adjust, and operate machine tools such as lathes and milling machines to make or rework metal parts, mechanisms, tools, or machines to exact tolerances and dimensions Using a variety of machinist hand tools and precision measuring instrument

Columbus, MS • (31 miles) • Full Time • 10/29/2026

MAINTENANCE TECHNICIAN Automation Personnel Services is looking for a Maintenance Technician for a company based inColumbus,Mississippi.Inthisrole, youwill primarily be responsible for repairing and maintaining machinery and mechanical equipment such as electric motors, pneumatic tools, conveyor systems, production machines and equipment. Pay Rate $22.00to $30.00per hour Schedule and Hours Monday through Friday, 800 am to 500 pm. Maintenance Technician Duties and Responsibilities •Observe mechanical equipment in operation to locate performance issues. •Dismantle equipment to gain access to and replace or repair defective parts. •Examine form and texture of parts to detect imperfections. •Inspect used parts to determine changes in dimensional requirements when fitting new parts. •Repair and