Louisburg, NC 27549 • (39.7 miles) • Full Time • 9/22/2026

Job descriptionBobbees is seeking energetic and enthusiastic individuals for our Production Managers and Supervisors positions. These individuals will oversee daily production and scheduling needs, and be a vital contributor to the success of the Bobbee's quality plan and compliance with FDA, Dept. of Agriculture, and third party audit regulations and requirements.ESSENTIAL FUNCTIONS:Oversee all operational aspects of the areas of responsibility including but not limited to: safety, quality, delivery, service, manufacturing, new product introductions, personnel management, and special projects.Responsible for seeing operational tasks are performed in a manner which aligns with the Company’s Quality System, Safety and Environmental Management System, and all governing regulatory bodies in t

Franklinton, NC 27525 • (38.2 miles) • Full Time • 9/17/2026

JOB LOCATION: Franklinton, NCPOSITIONS AVAILABLE: 1PRIMARY FUNCTION:Perform general construction tasks involving physical labor at construction projects and plants. May operate hand and power tools of all types: Air hammers, small mechanical hoists, surveying and measuring equipment, and a variety of other equipment and instruments. May clean and prepare sites, dig trenches, set braces for support, erect scaffolding, cleaning up rubble and debris.ESSENTIAL DUTIES:Asphalt Plant - YardmanOperate jackhammers, drills and other power tools as required.Position, join, align, and seal structural components.Shovel materials.Signal equipment operators to facilitate alignment, movement, and adjustment of machinery, equipment, and materials.Spray materials such as water, sand, steam, or paint through

Youngsville, NC • (44.6 miles) • Full Time • 9/17/2026

Production Associate ManufacturingLocation: Youngsville, NCPay:-$16 Shift Premium-$2.00Shift:- depending on department 5pm-2am or 6pm-3am 8-10 hours per day OT as required by business needsPosition Summary The Production Associate is responsible for safely handling, inspecting, labeling, and transporting glass materials throughout the warehouse and production areas. This role requires physical stamina, attention to detail, and the ability to operate equipment while maintaining quality and safety standards in a fast-paced manufacturing environment.ESSENTIAL DUTIES AND RESPONSIBILITESMove glass from, tables, furnace, rolling racks, delivery trucks, or wood crates for eight or more hours, dailyTransport of materials including glass from one position/location in the warehouse to anotherRespons

Rougemont, NC 27572 • (39.6 miles) • Full Time • 9/16/2026

Job Posting TitleESI Plant Operator RNGJob DescriptionJob Title: Plant Operator – Rougemont, North CarolinaCompany OverviewENERGYneering Solutions Inc. ® (ESI) provides exceptional technical expertise in engineering and operations for the biogas utilization and management industries. Since 2007, ESI has specialized in design, construction, and operations for biogas projects that collectively produce over one million MWh of renewable electricity and over 50 million gallons of renewable vehicle fuel every year. ESI is built upon the principle of providing our clients with unmatched experience, flexibility, and follow-through.Job OverviewOperate a Landfill Gas to Renewable Natural Gas Plant “RNG” facility to maximize production. Operator will work closely with Plant Manager to conduct all pla

Henrico, VA • (13.5 miles) • Full Time • 8/28/2026

Ability to work at any of our 4 locations:Richmond, VAChester, VAEast End, VAColonial Heights, VANo prior laser therapy experience is required. We are willing to train the right candidate who demonstrates a strong work ethic, a positive attitude, and a commitment to providing exceptional patient care.1. Clinical Assistance:- Escort patients to examination rooms and prepare them for their appointments.- Record medical histories, and other pertinent information accurately.- Assist physicians during medical procedures and examinations.- Ensure exam rooms are clean and stocked with necessary supplies and equipment.- Help patients with shoes2. Laser Technician-Perform laser therapy treatments according to physician protocols.-Document treatments accurately within the electronic medical record (

Farmville, VA 23901-2564 • (43.5 miles) • Full Time • 9/23/2026

Nos alegra que ests aqu. Pinsalo: t y nosotros? Parece que podramos ser una pareja perfecta en el paraso de la carne. Si ests aqu por:Papas fritas rizadas con descuento (y todos los artculos de nuestro men, de hecho)Horario flexibleComidas gratuitas por turno*La mejor capacitacin en su clase y aprendizaje continuoOportunidades de progresoTiempo libre remunerado*Plan de jubilacin 401(k)*Beneficios de matrcula*Mdico, dental y de la vista*Campeones de la esperanza*Programa de recomendacin de efectivoHerramienta de apoyo para el bienestar en el viajePrograma de descuentos PerkSpotPrograma de reconocimientoProgramas de calzado antideslizanteParticipacin comunitaria y caritativaPrograma de subvenciones Encendiendo sueosConcursos de entrenamientoBueno, ests en el lugar correcto. Tambin ests en el

South Boston, VA 24592 • (31.3 miles) • Full Time • 8/31/2026

Joining Wendy's as a Part Time Team Member offers an exciting opportunity to be part of a dynamic and energetic environment in. You will have the chance to work alongside a team that embodies our core values of innovation, empathy, and customer-centricity. Engage with customers daily, making their experience memorable while developing essential skills in a fast-paced setting. The onsite nature of this role means you’ll be immersed in the heart of our restaurant culture, fostering collaboration and camaraderie with colleagues.You'll have the satisfaction of being part of a high-performance team focused on excellence and problem-solving. If you’re passionate about serving others and enjoy a flexible work environment, this is the perfect position for you. Join us in creating a fun atmosphere

Henrico, VA • (13.5 miles) • Full Time • 9/22/2026

Title: Machine Operator - 2nd shiftLocation: Henrico, VAHire Type: Direct HireShift : 2nd Shift | 3:30p- 11:30pCompensation: $27-$31 DOEBenefits: As a contract employee of Sterling, you are eligible to receive aFull Employee Benefits Packagethat includespaid time off, paid holidays, 3 medical plans to choose from, dental & vision plans, 401(k), and an Employee Stock Ownership (ESOP) plan.Overview: We are seeking a skilled Machine Operator to join a high-performance manufacturing team on 3rd shift. This role is responsible for setting up, operating, and maintaining automated production equipment while ensuring product quality, process accuracy, and efficient workflow. The ideal candidate will be detail-oriented, safety-focused, and comfortable working in a fast-paced production environment

Farmville, VA • (43.5 miles) • Full Time • 9/22/2026

The Bucket Operatoroperates heavy equipment of various types to remove branches and tree material from electrical lines.ESSENTIAL FUNCTIONSAlways follow and help enforce safe practices and rulesAssist in preparing equipment and materials for each day’s work at Foreperson’s directionOperate equipment as directed by ForepersonHelp maintain and repair equipment and tools used in operationsAssist other crew members in all aspects of daily activities and take a leadership role when requiredCleans up and disposes of all debrisSets up barriers, warning signs, flags, markers, etc. to protect employees and publicKeeps informed on new equipment, specifications, standard practices, operating procedures, and customer and company employee relations policies and practices.Track and report mileage to For

Henrico, VA • (13.5 miles) • Full Time • 9/20/2026

About CarvanaAt Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Using our Carvana Certified 150-point inspection process, we're able to verify that every vehicle meets our rigorous mechanical and cosmetic standards.We strive to provide only the highest quality vehicles to our customers in our mission to deliver a no-hassle, better car buying experience. We are actively looking for passionate and talented individuals who can help us deliver on that promise.Think you've got

Blackstone, VA 23824 • (37.7 miles) • Full Time • 9/17/2026

Industrial ElectricianLocation: Greater Richmond area. 1 - 2 hour radius.Company Overview:Moore's Electrical & Mechanical is a 100% employeeowned (ESOP) commercial and industrial services company serving Virginia and North Carolina since 1985. Our mission is to build people as well as buildings-doing all things with a servant's heart and leaving a positive, lasting impact. We vision employees to say Moore's is the best place they've ever worked, our customers to receive the best service they've ever had, and our communities to be strengthened by our work. Our values-Execute, Protect, Improve, and Character-drive every job we do.The Role:The Industrial Electrician serves as an essential part of successful electrical system installs on our industrial projects. Our Electricians are responsibl

McKenney, VA 23872 • (42.8 miles) • Full Time • 9/16/2026

Job Title: Production Worker / Assistant Machine OperatorSchedule & PayPay Rate: $14.50 per hourSchedule: Monday – FridayHours: 8:00 AM – 4:30 PMLocation: McKenney, VAPosition OverviewWe are seeking dependable and motivated individuals to join our team as a Production Worker / Assistant Machine Operator in a fast-paced manufacturing environment. This entry-level position is responsible for supporting production operations by assisting machine operators, handling materials, assembling products, and ensuring the production line runs efficiently.The production worker plays a key role in maintaining productivity and product quality by supporting daily manufacturing activities. As an assistant machine operator, you will work closely with experienced operators and supervisors to ensure equipment

South Hill, VA 23970 • (12.7 miles) • Full Time • 9/15/2026

Bilingual Plant Production Supervisor/Lead $1000 SIGN ON BONUSLead a team. Make an impact. Grow with a company that values its people.We are looking for an experienced Bilingual Production Supervisor/Lead to join our team and play a key role in the daily success of our processing plant. This is a hands-on leadership opportunity for someone who enjoys working with people, solving problems, improving processes, and making sure the operation runs safely and efficiently.As the Plant Production Supervisor/Lead, you will work closely with the management team to oversee plant operations, production, distribution and our team of associates. You'll have the opportunity to directly influence productivity, quality, employee development, and overall plant performance.If you are a strong leader who lea

Roxboro, NC 27573 • (37.3 miles) • Full Time • 9/15/2026

Are you looking for a great opportunity to join a growing company? Are you wanting to become a part of great team? Are you looking for a full-time position with benefits and a competitive starting pay? Then Spuntech Industries is looking for you!Skilled Operator Roxboro, NCSpuntech Industries Spuntech is a global leader in the nonwoven industry. Our innovative developments provide consistent, unparalleled quality and performance, enabling our customers to create new and innovative products.Skilled Operator (Full-time w/benefits) At Spuntech Industries, you will join a global leader committed to innovation and quality. We offer opportunities for growth and continuous learning. We invite you to be a part of a company that values safety, quality and continuous growth.Primary duties As a skill

Farmville, VA • (43.5 miles) • Full Time • 9/15/2026

Description: For over twenty years, Cinterra has provided specialized electrical utility and solar construction services to support some of the nation's leading contractors, private industry, and public utilities. Our commitment to quality and customer satisfaction is only rivaled by one of the highest safety ratings in the industry. The services we provide help to bring electric power and renewable energy sources to millions. Come join our team today!Position Summary:The Quality Control (QC) Technician position is a hands-on construction role responsible for managing and executing the site-specific Quality Control Program. A key individual in achieving the division's goals and objectives. This position requires excellent communication skills, analytical thinking, and problem-solving capab

Blackstone, VA • (35.9 miles) • Full Time • 9/8/2026

At Tlingit Haida Tribal Business Corporation (THTBC), your work goes beyond the job descriptionit becomes part of a purpose-driven legacy. Our continuous commitment to growth directly contributes to the strength, resilience, and future of the communities we serve. Every milestone we achieve helps fund programs, expand services, and create lasting value for the Tribe, making each success a shared one.For more than 35 years THTBC and its subsidiaries have delivered mission-critical services to federal clients globally. From logistics and information technology to cybersecurity and facilities operations, we are united by a single purpose: to generate meaningful economic opportunity and sustainable growth for the Tlingit & Haida Tribes of Alaska.Together We Grow – One Mission, One Team – With

South Hill, VA 23970 • (12.7 miles) • Full Time • 9/4/2026

At ACI we build our company and our culture not by counting people, but by making our people count!$0.00 COST FOR MEDICAL, DENTAL, SHORT TERM DISABILITY & LIFE INSURANCE (EMPLOYEE ONLY) COVERAGE!Atlantic Constructors is seeking dynamic, motivated, career minded individuals to join our expanding team! Atlantic Constructors has been recognized as an industry leader in the Mid-Atlantic Region for over 50 years.Benefits:Medical Insurance Plan ($0.00 Employee-Only)Dental Insurance Plan ($0.00 Employee-Only)Short-Term Disability Plan ($0.00 Employee-Only)Life Insurance Plan ($0.00 Employee-Only)Vision Insurance Plan401(K) Retirement Plan with Generous Company MatchingHealth Savings Plan with Generous Company MatchingWellness ProgramsVehicle & Phone AllowanceAtlantic Constructors offers competiti

Boydton, VA 23917 • (4 miles) • Full Time • 9/4/2026

Job Title:Quality Control (QC) InspectorLocation: Boydton, VAEmployment Type: FullTimeOverviewEPI Power is seeking an experiencedQuality Control (QC) Inspectorto support electrical construction activities on a major data center project inBoydton, VA.The QC Inspector ensures installations meet project specifications, codes, and quality standards while working closely with field and commissioning teams to drive quality, safety, and efficiency.This position requires availability to work six days per week (typically Monday–Saturday) during peak construction phases.Key ResponsibilitiesInspect electrical installations (underground duct banks, cable tray systems, cable bus systems, wall roughins) for compliance with project specifications and NEC requirements.Perform delivery and equipment inspec

Louisburg, NC 27549 • (39.7 miles) • Full Time • 9/2/2026

Now Hiring : Hygiene Assistant - Louisburg At Lane & Associates Family Dentistry, we love to make our patients smile, and that starts with you!The Hygiene Assistant plays a key role in supporting our hygienists by handling patient-related clerical duties, assisting with clinical tasks, and maintaining chart accuracy. This position helps ensure the hygienist can work efficiently and provide exceptional patient care. Direct patient interaction may vary based on the hygienist’s needs, but the goal is for the Hygiene Assistant to actively contribute, grow their knowledge, and enhance the overall patient experience. Key ResponsibilitiesDaily/Weekly/Monthly duties include, but are not limited to:Ensure treatment rooms are properly stocked, disinfected, and set up for each appointmentGreet patien

Oxford, NC • (26.5 miles) • Full Time • 9/23/2026

Senior Electrical Engineer – Direct Hire Location: Oxford, NC areaEmployment Type: Direct HireStarting Salary:$120,000–$140,000 annuallyExpress Employment Professionals is recruiting for a Senior Electrical Engineer to join an established product engineering and development team. This is a Direct Hire opportunity for an experienced engineer who enjoys taking products from concept and design through prototyping, testing, refinement, and production.The ideal candidate brings 10–15 years of electrical engineering experience, strong product development skills, and a working knowledge of Artificial Intelligence (AI) and its applications in engineering and product development.What You’ll Do Lead and contribute to electrical design at the system and PCB level, including prototype development, tes

Semora, NC • (43.6 miles) • Full Time • 9/22/2026

Qualifications:The Temporary Utility Worker position requires a high school diploma or equivalent and demonstrated experience working in a manufacturing or industrial environment. Candidates must be able to work independently with minimal supervision, communicate effectively, and perform hands-on cleaning tasks safely and efficiently. Prior experience with industrial cleaning practices is required, while forklift experience and familiarity with plant safety programs are preferred. Basic computer skills and the ability to work collaboratively in a team-based environment are also important for success in this role. Safety Comes First - All required PPE will be provided by the company with the exception of the steel toe shoes which the employee is responsible and must be available on first da

Henderson, NC • (23.5 miles) • Full Time • 9/22/2026

Quality Assurance Specialist • Preparing and implementing quality assurance policies and procedures • Performing routine inspections and quality tests • Identifying and resolving workflow and production issues • Meet with and review all workflow and production issues with Regulatory/Compliance Manager weekly/monthly • Meet with and review all workflow and production issues with department employees • Provide additional training where and when neededResponsibilities • Ensure that standards and safety regulations are observed. • Address and discuss issues and proposed solutions with all department management teams and Regulatory/Compliance Manager • Document quality assurance activities and create audit reports. • Make recommendations for improvement. • Create training materials and operatin

Norlina, NC 27563 • (18.4 miles) • Full Time • 9/21/2026

Glen Raven is recruiting for a Electrical/Mechanical Technician. The electrician is responsible for the maintenance, repair and support of all electrical problems throughout the plant to maintain performance and production.When you join Glen Raven, you play a critical role and your input matters. Everyone who works at this family-owned business has a heart for people, makes a difference and is passionate about our products. We are team-oriented and are “all in” on doing it right. And that means listening to different viewpoints and providing ways for us to grow together and individually. As we weave connections around the world, we become stronger and keep our focus on shared success.*This is a night shift opening with a pay rate of $25.77-$30.61.*Responsibilities:Troubleshoot and repair e

Oxford, NC 27565 • (25.3 miles) • Full Time • 9/20/2026

Job Description The Maintenance Technician is responsible for maintaining, troubleshooting, and repairing production and packaging equipment in a manufacturing environment. This role helps keep equipment running safely and efficiently through preventive maintenance, repairs, and equipment improvements. The ideal candidate has strong mechanical troubleshooting skills and experience working with industrial machinery.Responsibilities Troubleshoot and repair manufacturing and packaging equipment.Perform preventive maintenance to reduce downtime.Diagnose equipment issues and implement corrective actions.Support equipment changeovers, setups, and adjustments.Work with hydraulic, pneumatic, and mechanical systems.Read basic schematics and maintenance documentation.Follow all safety, quality, and

Kittrell, NC 27544 • (32.3 miles) • Full Time • 9/17/2026

Position Summary:The Plant Utility Person is responsible for supporting the day-to-day operations, maintenance, and housekeeping of asphalt, concrete, or aggregate plants. This role plays a key part in ensuring plant equipment and facilities operate safely and efficiently.This position requires flexibility to work across multiple plant locations and schedules, including overtime and weekends as needed. Work is performed with general guidance, and the employee is expected to work independently within established procedures.Essential Duties and Responsibilities:Follow all company safety policies, MSHA, and OSHA regulationsMaintain a clean and orderly plant environmentPerform general plant housekeeping and cleanup, including:Using high-pressure hosesMaintaining drainage systemsRemoving debris

Henderson, NC 27537 • (21.6 miles) • Full Time • 9/16/2026

We are a John Deere dealer with 35 locations serving a diverse group of agricultural, commercial, and residential customers in North Carolina, South Carolina, and Virginia. At Quality Equipment, we pride ourselves on our commitment to our customers, our employees, and our community. Our employees and management stay close to our customers and strive to serve them quickly and in ways that make sense in each local area.Our work culture is ethical, entrepreneurial, and hard working. We work with excellent people every day – our customers and our co-workers. Our work is challenging and offers a great deal of variety in the tasks we do. At Quality Equipment, we strive to be the premier John Deere dealer in our region by serving our customers with commitment and integrity.We offer the opportunit

Henderson, NC 27537-7461 • (23.5 miles) • Full Time • 9/16/2026

Edwards Unlimited is a full-service metal fabrication shop in Henderson, NC, under the same ownership since 2005. We run fiber laser cutting, tube laser, press brake forming, tube bending, plate rolling, welding, machining, media blasting, powder coating, and walk-in metal sales.We hold real tolerances for production customers. Parts you form feed straight into weld fixtures and powder coating, so a bend a degree off or a leg short doesn't get caught downstream. It gets caught at the customer.EQUIPMENT YOU WILL RUNPullmax Ursviken Optima 250 CNC press brake, 120-inch bed, with full setup, tooling, programming, and forming. Support equipment as needed: Wysong & Miles D-48 plate roll, Piranha ironworker, Baileigh bead roller, Apex deburring machine, forklift and overhead lifting.WHAT YOU WIL

Henderson, NC • (23.5 miles) • Full Time • 9/15/2026

OverviewAre you are looking for an exciting career? Do you have a strong mechanical or electrical aptitude? Are you driven by a desire to serve? Then we have the career for you! Come join our team as a Service Technician for a fast-growing convenience store company. The ES Service Technicians are responsible for setting and installing propane tanks, gas piping systems, and diesel and gasoline tanks; conduct system tests and purge cylinders and tanks, and repair and maintain company equipment. You will also get the opportunity to cross train in Dispatch!Pay: $28.00/hrResponsibilitiesEnsure that Company and Government safety, policy and regulatory standards are met at all times and maintain zero preventable accidents. Maintain safety and compliance records.Ensure that Company and Government

Oxford, NC 27565 • (25.3 miles) • Full Time • 9/15/2026

Overview We are seeking an Experienced CNC Technician to join our dynamic team in Oxford, NC. If you have a passion for precision machining and a knack for problem-solving, this is the perfect opportunity for you! In this role, you will play a crucial part in our manufacturing process, ensuring that our CNC machines operate efficiently and produce high-quality components. Join us and contribute to our commitment to excellence! Responsibilities Set up and operate CNC machines, including lathes and mills, to produce parts according to specifications.Read and interpret blueprints and technical drawings to ensure accurate machining.Monitor machine operations and make necessary adjustments to maintain quality standards.Perform routine maintenance and troubleshooting on CNC equipment to minimize

Oxford, NC • (26.5 miles) • Full Time • 9/15/2026

Screw Machine Manufacturing Engineer__________________________________________________________________________ Reports to: Manufacturing Engineer Manager Job Summary: The Screw Machine Engineer is responsible for developing, implementing, and optimizing manufacturing processes for Acme-Gridley and Davenport multi-spindle automatic screw machines. This position serves as the technical expert for screw machine operations by designing tooling and manufacturing processes, troubleshooting complex machining issues, improving equipment performance, supporting new product introductions, and driving continuous improvement initiatives. Working closely with Manufacturing Engineering, Quality, Maintenance, Tooling, and Production, the Screw Machine Engineer develops manufacturing processes that improv

Butner, NC 27509 • (42.9 miles) • Full Time • 9/11/2026

Job purposeReporting to the COO, the Production Manager is responsible for all operations, set ups, adjustments on his/her equipment, and general labor on the production line. He/she is also responsible for oversight of day-to-day operations of the production floor. Duties include, but are not limited to: operating process machinery and equipment; portioning ingredients; prepping pans and trays; hand-scaling ingredients; making boxes; stacking pallets; cleaning and sanitation; washing dishes; effective and respectful communication with team members and Line Supervisor. This is a fast-paced food production environment with hourly and daily goals that must be met, and a heavy emphasis on manual work. Food safety and emphasis on Good Manufacturing Practices are of utmost importance.Duties and

Oxford, NC 27565 • (25.3 miles) • Full Time • 9/10/2026

Production Operator (Dry End) Location: Oxford, NC 27565 Work Schedule: Mon to Fri / 7 am - 7 pm (12h shift / 2-2-3 rotational pattern) Pay rate: 26.26$ per hour Contract: W2 under staffing supplier; with a 3-month duration (temp to hire) Overview: In this role, you’ll drive the final stages of our production lineoperating specialized machinery, staging finished goods with mobile equipment, and ensuring top-notch product quality. Qualifications:• High School Diploma / GED• Hands-on experience in Industrial Manufacturing• Ability to operate or get certified on mobile equipment (Forklift, Bobcat, etc.)• Computer literacy & strong communication skills• Excellent attendance record & multi-tasking abilitiesKey Responsibilities: • Operate end-of-process machinery & mobile equipment (Forklift, Fl

Littleton, NC 27850 • (33.7 miles) • Full Time • 9/10/2026

Shop / Service ManagerBuddy Isles Tire & Automotive Littleton, NCPosition Overview:This is a hands-on shop and service leadership role. You run the floor and own the service experience from write-up through delivery. You keep work moving, jobs done right the first time, techs productive, and customers informed. You are the bridge between the bays and the front countertechnical resource, dispatcher, quality checkpoint, and the person who makes sure every vehicle leaves ready and every customer knows where they stand.We work on a wide range of vehicles, trailers, fleet, and occasional RVs/campers. We are a one-stop shop. If you like variety, this is the place.You report to ownership and serve as the shop/service manager day to day.What Makes Our Shop Different:Established and trusted local b

Creedmoor, NC 27522 • (41.9 miles) • Full Time • 9/9/2026

Job DescriptionAirClean SystemsJob Title: Electrical Assembler - ModifiedJob SummaryPerform all electrical assembly duties for all products produced for AirClean Systems. Ensure products are assembled correctly and safely for delivery to customers and distributors. Essential Functions/DutiesUnder general supervision, performs assembly operations at a work station or bench using basic hand tools.Reads work orders, follows production drawings and sample assemblies, or receives verbal instructions regarding duties to be performed. Must be able to read and interpret assembly instructions. Ability to identify and read values of common electronic components. Ability to read and interpret blueprints, wiring diagrams, assembly prints, and electronic schematics.Familiarity with tools. Operates some

Henderson, NC • (23.5 miles) • Full Time • 9/9/2026

Shop Foreman – Toyota DealershipClassic Toyota of HendersonAbout Us: We are a fast-growing Toyota dealership committed to delivering top-tier service and building a strong, skilled team. As our service department continues to expand, we’re looking for a dedicated Shop Foreman who can lead from the front, support our technicians, and help develop the next generation of talent.Position Overview: The Shop Foreman plays a critical leadership role in our service departmentbalancing hands-on technical expertise with team guidance and workflow management. This position is ideal for an experienced technician ready to take the next step into leadership while mentoring and training newer technicians in a high-paced, growth-focused environment.Key Responsibilities:Oversee daily shop operations to ens

Oxford, NC 27565 • (25.3 miles) • Full Time • 9/4/2026

BH SENS Oxford, NC is our newly built production site in North America.Its mission is to strengthen and further expand our market leadership in Tire Pressure Monitoring Systems (TPMS).In a highly automated, startup style environment, we industrialize innovative TPMS solutions for global OEM and IAM customers.The Maintenance & Spare Parts Technician is responsible for technical equipment health, spareparts management, preventive maintenance plans and safety inspections.Key ResponsibilitiesCreate, update and document preventive maintenance and repair plans for equipmentExecute scheduled mechanical, electrical, PLC, pneumatic and hydraulic maintenance and repair activities.Systematically troubleshoot and repair equipment to restore functionality and reduce recurring failures.Plan and trigger

Butner, NC 27509 • (42.9 miles) • Full Time • 9/3/2026

**OB SUMMARY: **The Painter II is responsible for the application of paint and other coatings using electrostatic / air assist paint guns and other automotive type paint application devices on Company products including military spec paint. As a Painter II, this position has the knowledge and skills to perform in any and each area of the paint process.**ESSENTIAL DUTIES AND RESPONSIBILITIES: **These duties are not meant to be all-inclusive and other duties may be assigned.Prime, paint, and touchup vehicles with power spray equipment and brushes. Flush tanks, hoses and guns prior to color changeovers. Mix all types of paints for proper color, formula, conditions, viscosity and consistency. Perform titrations and mix or adjust chemicals as needed.Disassemble, clean, repair, adjust and reasse

Youngsville, NC • (44.6 miles) • Full Time • 9/17/2026

Fabricator Location: Pay:Shift: OT as required by business needs Position Summary Trulite is seeking a Fabricator to support production operations in a fast-paced manufacturing environment. This role is responsible for operating glass-edging machinery, inspecting product quality, and ensuring production efficiency while maintaining safety standards. ESSENTIAL DUTIES AND RESPONSIBILITESOperate single-side straight-line glass edging machine to polish glass/mirror edgesInspect products for defects and report abnormalities to supervisorRead and follow work instructions, labels, and picking listsMaintain production flow and meet daily output goalsFollow all safety procedures and quality standardsQUALIFICATIONSExperience with, hand fabrication, or polish machinesPrior experience in a manufactur

Louisburg, NC 27549 • (39.7 miles) • Full Time • 9/2/2026

Company Description:Bobbees Bottling in beautiful Louisburg, NC (a fifteen minute commute from Wake Forest, NC) provides excellence in co-packing. When it comes to manufacturing, packing, and distributing product, Bobbees is the best in the business. If you are a dependable and personable individual who is looking for a rewarding position with an established company, apply to join our team today!Bobbees is seeking a highly organized, energetic and professional department Supervisor. You will work with all areas of the business and have a close working relationship with our customer base. This position is responsible for all functions associated with the production of bulk sauces and condiments for bottling.Job DescriptionDuties include; but are not limited to...Effective verbal and written

Henrico, VA • (13.5 miles) • Full Time • 9/22/2026

Title: Machine Operator - 3rd shiftLocation: Henrico, VAHire Type: Direct HireShift: 3rd Shift | 11p-7aCompensation: $27-$31 DOEBenefits: As a contract employee of Sterling, you are eligible to receive aFull Employee Benefits Packagethat includespaid time off, paid holidays, 3 medical plans to choose from, dental & vision plans, 401(k), and an Employee Stock Ownership (ESOP) plan.Overview: We are seeking a skilled Machine Operator to join a high-performance manufacturing team on 3rd shift. This role is responsible for setting up, operating, and maintaining automated production equipment while ensuring product quality, process accuracy, and efficient workflow. The ideal candidate will be detail-oriented, safety-focused, and comfortable working in a fast-paced production environment where pr

South Hill, VA 23970 • (12.7 miles) • Full Time • 8/30/2026

Head Plant Engineer / Maintenance ManagerLooking for a dynamic leader to join a fast-paced and growing company?Southern Textile is seeking an experienced Head Plant Engineer / Maintenance Manager to lead the maintenance and engineering functions at our Fredericksburg facility. This is an opportunity to join a family-owned regional company that has been successfully serving customers since 1934.The ideal candidate will have 3–5 years of maintenance leadership experience and a strong background in plant maintenance, equipment reliability, and preventative maintenance programs. This position provides leadership to the maintenance department while overseeing plant equipment, facilities, utilities, capital projects, and continuous improvement initiatives.ResponsibilitiesMaintenance Leadership: