Terrell, TX • (27.4 miles) • Full Time • 9/11/2026

Position SummaryWe are seeking a hands-on 1st Shift Production Supervisor to lead manufacturing operations at a facility in Terrell, TX. This position is responsible for overseeing daily production activities, driving safety and quality standards, and ensuring production goals are met efficiently and on schedule.The ideal candidate will provide leadership and support to production team members, monitor workflow and performance, address operational issues, and promote a positive, team-oriented work environment. Strong communication skills, previous manufacturing leadership experience, and the ability to thrive in a fast-paced production setting are essential for success in this role.Key ResponsibilitiesSupervise daily powder coating operations including pretreatment, powder application, cur

Mesquite, TX 75149 • (40.3 miles) • Full Time • 9/10/2026

Job Position: Machine OperatorLocation: Mesquite, TX 75149Pay Rate: $18.00/hrShift: 1st Shift, 2nd shift, 3rd shiftDescription: Machine Operator : Industrial Production / Salt Packing Department Heavy Lifting & Packing: Manually lift and move salt bags weighing up to 55 lbs consistently throughout the shift. Conveyor Management: Monitor the conveyor belt system, ensuring bags move smoothly through the tunnel to the automated taping machinery. Quality Control: Maintain a high level of attention to detail to ensure bags are sealed, taped, and palletized correctly. Teamwork & Independence: Work effectively as part of a two-man team when required, but remain fully capable of managing the entire station solo.PandoLogic. Keywords: General Machine Operator, Location: Mesquite, TX - 75149 , PL: 60

Red Oak, TX 75154 • (41.9 miles) • Full Time • 9/10/2026

Aircraft Assemblers with 5plus years of experience for a long-term contract.Assembler $35hr+per diem if qualified Location Red Oak, TX & Dallas, TXMust have aviation experience and be open to any shift.G.E.D. or EquivalentANDHave a minimum of5years’ experienceasan aircraftassembler or experience in manufacturing, or in a similar industry thatdemonstratesthe following skillsets:1. Drilling close tolerance holes and installation of manufacturing hardware2. Use of power tools (pneumatic and electric, including drills, rivet guns, torquing wrenches, etc.).3. Read and interpret technical drawings and blueprints.?ORSuccessfully complete approved Bombardierinitialtraining programANDSuccessfully pass an entrance assessmentdemonstratingbasic technical skills (applicable to all the above prerequisit

Lancaster, TX • (41.5 miles) • Full Time • 9/10/2026

Job Title: Machine OperatorCompany Location: Lancaster, Texas19020 We are seeking a dedicated and skilled Machine Operator to join our dynamic team. Our commitment to excellence drives us to continuously improve our processes and deliver outstanding results. In this role, you will play a vital part in maintaining the high standards we set for our operations.Roles and Responsibilities: - Operate and monitor various types of machinery to ensure safe and efficient production. - Conduct routine inspections and maintenance on machines to prevent downtime. - Collaborate with team members to optimize production processes and improve product quality. - Follow all safety protocols and guidelines to create a safe working environment. - Document production data and report any issues or anomalies to s

Ennis, TX • (30.6 miles) • Full Time • 9/9/2026

Miscellaneous and Structural Steel Fabrication Shop Quality Control InspectorMust have prior experience in steel fabrication QC of miscellaneous (stairs and hand rails) and structural steel.Position will have a main focus of checking dimensions and accuracy of steel products fabricated in the shop as well as documenting of project hours and inventory control.This position will require a self starter with strong communication, organization and team motivation skills. We need a candidate with quality Control, safety background and inventory control experience.Bilingual a plusHealth, life, dental and vision insurance.PTO after 90 daysMonday - Friday 7:00 to 3:30Job Type: Full-timeBenefits:Dental insuranceHealth insuranceLife insurancePaid time offVision insuranceExperience:Steel Fabrication:

Athens, TX • (20 miles) • Full Time • 9/7/2026

We are seeking an experienced Electrical Engineer to support the design, troubleshooting, documentation, and continuous improvement of commercial HVAC products in a manufacturing environment.This role is ideal for a hands-on engineering professional who enjoys solving complex electrical issues, supporting production operations, working directly with customers, and contributing to product development efforts. The successful candidate will be a seasoned engineer with strong technical expertise, excellent problem-solving skills, and the ability to work independently in a fast-paced environment.Relocation assistance is available for qualified candidates.Key ResponsibilitiesSupport production operations by troubleshooting electrical issues and identifying root causes.Create and maintain wiring

Forney, TX 75126 • (32.6 miles) • Full Time • 9/4/2026

ABOX Packaging Company is seeking an experienced Die Maker to join our Die Shop team. This position is responsible for the fabrication, repair, modification, maintenance, and inspection of dies, tooling, jigs, fixtures, gauges, and related components used in the manufacturing process.The ideal candidate will have strong machining, mechanical, blueprint-reading, precision measurement, and problem-solving skills, along with experience working with CNC and conventional machine tools. Candidates with experience using CAD/CAM software, CNC programming, and precision inspection equipment are highly encouraged to apply.This is a hands-on position for a skilled trades professional who can independently interpret drawings and specifications, determine the appropriate machining processes, and produc

Lancaster, TX 75134 • (42.6 miles) • Full Time • 9/4/2026

Job Posting Title CAD/CAMJob DescriptionLocation: Lancaster, Texas (Dallas-Fort Worth area)Company: LGS Technologies – A Family-Owned Custom Manufacturing Leader for 73+ YearsKickstart Your Career in Manufacturing!LGS Technologies, a trusted name in custom manufacturing for over seven decades, is looking for a motivated CAD/CAM Drafter & CNC Programmer to join our team. This position is ideal for someone with a solid foundation in AutoCAD and a basic understanding of CNC programming who’s ready to learn, grow, and build real-world experience in a fast-paced environment.About UsLGS Technologies specializes in die-cutting, water jet cutting, laser cutting, and CNC machining to create high-quality custom components. As a family-owned company, we’re proud to invest in our employees’ success th

Rockwall, TX 75032 • (38.5 miles) • Full Time • 9/3/2026

Join a high-performing team that is revolutionizing the wire and cable industry!Agave Wire is looking for a Quality Manager to lead and oversee the company's quality assurance and control functions. In this role, you will ensure that our products consistently meet the highest standards of quality. You will be responsible for developing, implementing, and maintaining quality systems, conducting audits and inspections, and working with cross-functional teams to drive continuous improvement.WHAT we need you to do.Lead the development, implementation, and maintenance of the company's Quality Management System (QMS) in accordance with ISO 9001 requirements.Oversee the quality assurance and control processes to ensure compliance with regulatory standards and customer expectations.Manage and ment

Rockwall, TX 75032 • (38.5 miles) • Full Time • 9/3/2026

Agave Wire is seeking Machine Operators:Night Shift: 6pm-6am Monday-Thursdays (Occasionally Fridays)About the Role:We are seeking a highly skilled Machine Operator to join our team in the Manufacturing industry. As a Machine Operator, you will be responsible for operating and maintaining various production machinery, including assembly line, press machines, overhead cranes, deburring, micrometer, clamp truck, and mold machine. Your primary goal will be to ensure that all machines are running efficiently and producing high-quality products. You will work closely with the production team to meet daily production targets and ensure that all safety protocols are followed.Minimum Qualifications:High school diploma or equivalentAt least 2 years of experience operating production machineryAbility

Dallas, TX 75217 • (40.8 miles) • Full Time • 9/3/2026

About the Role:The Service Technician is responsible for performing mobile maintenance and repair services on company-owned and customer equipment. This position will primarily work from a company-provided service vehicle and travel to customer locations, roadside locations, terminals, and other sites to diagnose problems and complete repairs in the field.The Service Technician will be expected to work independently, respond to service calls in a timely manner, identify mechanical issues, and make safe and effective repairs to get equipment back in service as quickly as possible. This role requires strong mechanical ability, good judgment, and a commitment to safety and customer service.Minimum Qualifications:High school diploma or equivalent.Previous experience performing mechanical repai

Mesquite, TX • (38.8 miles) • Full Time • 9/1/2026

We're hiring for entry-level automotive roles at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. In these entry-level roles, you'll have several positions to choose from:Detailer: detailing vehicles, including washing, interior cleaning, and exterior buffingLot Attendant: move vehicles from one department to the next in our Inspection CentersPhotobooth Associate: take photos of our vehicles so customers can see our vehicles in our spinnersInspection Associate: inspect the interior and exterior of the vehicles and accurately identify any imperfections/defectsPay: Starting pay for this position is $16/hr.Schedule:Please keep in mind that all locations are subject to mandatory overtime based on business need

Ennis, TX • (30.6 miles) • Full Time • 8/30/2026

$17.50 an hour / Monday - Thursday 7am-4:30pm / Friday 7am-11am Stamping Operator (Ideal candidate will have machine operating experience already, love to work on cars or take things apart and put back together. Basic troubleshooting experience.) Some computer skills neededOrganizational skillsCleanlinessAbility to stand for long periods of time Visual inspectionsPhysical inspections by use of measuring devices (calipers/micrometers)Troubleshooting capabilitiesBending/Stooping/SquattingBasic knowledge of hand tools like wrenches, crow bars, hammers, mallets, screwdrivers etc.Routine Maintenance/cleaning with lubrication, coolants, etc.Forklift experience is a PLUS.Handling of raw metals Diversified Sourcing Solutions is a national search firm that places top candidates with our top custom

Ennis, TX • (30.6 miles) • Full Time • 8/29/2026

Production Manager - ManufacturingSummary:The Production Manager is responsible for all daily activities within the plant including production functions, plant organization, housekeeping and other duties as required. The Production Manager is also involved with all plant personnel including hiring, employee development, terminations and disciplinary actions. This position is 1st shift, requires the flexibility to work 40+ hours per week and weekends as required. The Production Manager reports directly to the Plant Manager.Responsibilities:The responsibilities of this position include, but are not limited to:• Practice proper PPE compliance and maintain a safe working record and environment• Maintain communication with other manufacturing facilities and offices• Immediately communicate unsa

Rockwall, TX • (42.3 miles) • Full Time • 8/29/2026

Seeking a Process Engineer in Rockwall, Texas for a global provider of industrial lubrication solutions.The Process Engineer analyzes manufacturing processes and process data to identify opportunities to improve efficiency, cost-effectiveness, and quality, and leads initiatives to optimize processes and workflows. This role partners with Quality Assurance and cross-functional teams to implement best practices, drives capital projects, and ensures compliance with safety and environmental standards.Essential Duties and Responsibilities:Analyze current manufacturing processes and process data to identify trends and opportunities to improve efficiency, cost-effectiveness, and qualityDevelop and implement strategies to optimize processes and workflows, driving continuous improvement initiatives

Mesquite, TX 75150 • (43.1 miles) • Full Time • 8/27/2026

Hexagon Purus Systems USA, a division of the company Hexagon Purus, focuses on designing and manufacturing systems, software, and zero emission e-Mobility vehicle integration for commercial Battery Electric Vehicles and Fuel Cell Electric Vehicles. A multi-national company, we are a world leader in vehicle integration, battery pack, module, and sub-assembly manufacturing. Job OverviewWe are seeking an on-site, full-time Electrical Engineer or Electrical Engineering Technician to work out of our modern Mesquite facility just outside Dallas, TX. This role reports to the Director, Operations, and serves as the primary technical bridge between our remote Engineering teams, Dallas manufacturing operations, and internal Procurement groups. This is primarily a desk- and process-driven engineering

Ennis, TX 75119 • (28 miles) • Full Time • 8/26/2026

Job Posting TitleThread Inspector-1 Job Description Thread InspectorBenoit is a leading provider of premium threading, completion products, and engineered services for the upstream oil and gas industry. With 215,000 sq ft of total manufacturing space company-wide, we design and manufacture a comprehensive range of wellbore and running tools for exploration and production operations. With over 200 million feet of tubulars run worldwide and more than 400 deepwater and ultra-deepwater completions executed, we bring proven experience to every project. Our operations are guided by four core values: Service, Quality, Integrity, and Innovation. These principles shape ourdecisions, define our standards, and ensure consistent alignment across our organization.At Benoit,we believe our people are ou

Athens, TX 75751 • (23.1 miles) • Full Time • 8/24/2026

Argon Medical is a global manufacturer of specialty medical products, headquartered in Plano, Texas. Argon offers a broad line of medical devices for Interventional Radiology, Vascular Surgery, Interventional Cardiology and Oncology. Argon’s brand is recognized for best-in-class products that improve patient outcomes via percutaneous, image-guided procedures. Our values describe what we believe in and how we operate. These values are our moral compass which guide our decisions and define the deeply held beliefs and principles of our organizational culture. Argon Medical is a family of individuals united by a mission and culture which continue to grow stronger every day.Excellent opportunity for an Industrial Maintenance Mechanic in Athens, TX!What you will do:The Industrial Maintenance Mec

Waxahachie, TX 75165 • (39.8 miles) • Full Time • 8/21/2026

Job Description: Quality ManagerReports To: Quality Director and PresidentThe Quality Manager is responsible for developing, implementing, and leading the plants Quality Management System (QMS). This position provides strategic and operational leadership for all quality assurance and quality control activities throughout the manufacturing process.Reporting directly to the Quality Director and President, the Quality Manager will establish quality systems, policies, procedures, and performance standards while serving as the plants primary quality leader. This position is responsible for building the quality program from the ground up, developing sustainable processes, driving continuous improvement initiatives, ensuring compliance with customer and regulatory requirements, and fostering a cu

Wilmer, TX 75172 • (36.5 miles) • Full Time • 8/21/2026

Location: Wilmer, TXPay: $20.00 per hourSchedule: Weekend Shift (Friday, Saturday, Sunday, 6:00 AM–6:00 PM)Position OverviewWe are seeking an experienced Line Leader for our warehouse packing operation. The ideal candidate will have prior leadership experience in a warehouse or production environment and be able to effectively manage team performance, productivity, and quality standards.Bilingual (English/Spanish) candidates are preferred but not required.Training ScheduleAll selected candidates must complete a mandatory training period:Training Shift: Monday–Thursday, 5:00 PM–4:00 AMDuration: 2 weeksAfter successful completion of training, the employee will transition to the regular weekend Line Leader schedule.ResponsibilitiesMonitor productivity, quality, and safety standards.Ensure pac

Dallas, TX 75227 • (43.5 miles) • Full Time • 8/20/2026

Fire Extinguisher TechnicianLocation: Dallas/Fort WorthCompany: Safety Control, LLC.Join a Growing Leader in Fire & Life Safety since 2013.Safety Control is a rapidly growing fire and life safety contractor providing services throughout Texas and nationwide. We are seeking a dependable, detail-oriented Fire Extinguisher Technician to join our field operations team. This role is ideal for a technician who takes pride in safety, compliance, and customer communication.Position Overview:As a Fire Extinguisher Technician, you will be responsible for inspecting, servicing, replacing and installing fire extinguishers and related life safety equipment at customer locations. You will work independently in the field using a company-issued vehicle and smart device, ensuring all work meets applicable

Mabank, TX 75147 • (4.7 miles) • Full Time • 8/18/2026

Techniform is looking for an experienced 2nd Shift CNC Machine Operator to join our team. Techniform serves many industries from Aerospace to Architectural providing stretch forming, machining and fabrication. The ideal candidate would be responsible for programs, sets up and operates the CNC 3 Axis Machining Center by performing the following duties.Job Summary:· Sets up, operates and assists/edits programming of the CNC 3 Axis Machining Center to perform a combination of machining operations such as facing, turning, boring, threading, drilling, reaming, broaching, knurling metal work pieces to specifications.*· Sets up and operates CNC 3 Axis Machining Center to complete metal work pieces to specifications.*· Reviews set up sheets and specifications to determine program sequence, set up

Mabank, TX 75147 • (4.7 miles) • Full Time • 8/15/2026

Move Forward with Volt!Volt is immediately hiring MultipleElectrical and Mechanical Refurbishment Techniciansin Mabank, Texas.As an Electrical or Mechanical Refurbishment Technician,you will:Teardown and rebuilding of turbine enginesMechanical will entail turning wrenches to assemble and disassemble equipment and industrial equipment, installations of mechanical parts and componentsElectrical will assist with cabling, wiring, testing, assembly and sub-assembly; build up consoles which include PLC’s, input/output modules, power supplies, terminal strips and other electrical devicesThis is a full-time, temp to hire opportunity.Schedule:Monday - Friday1pm -9:45pm. We offer LOTS of overtime and Saturday work.The ideal candidate will have:1 - 2 years of recent mechanical or electrical skillsIde

Terrell, TX 75160 • (29.4 miles) • Full Time • 9/11/2026

Summary/ObjectiveThe Production Supervisor is responsible for overseeing daily manufacturing operations and leading front-line production employees to ensure safe, efficient, and high-quality output. This role reports directly to the Production Superintendent and is accountable for executing production plans, maintaining workflow efficiency, and supporting continuous improvement initiatives.The Supervisor provides hands-on leadership on the production floor and ensures adherence to company policies, safety standards, and quality expectations. This role is accountable for safety, quality, delivery, cost, and team development within a high-volume, high-mix metal fabrication environment.Essential FunctionsSupervise daily production activities to ensure achievement of safety, quality, delivery

Sunnyvale, TX 75182 • (39.4 miles) • Full Time • 9/11/2026

Job Opening: Quality Inspector 2 at Performance Pulsation ControlJob Description Performance Pulsation Control, a leader in providing innovative solutions within the industry, is excited to announce the opening for a Quality Inspector 2. As we expand our team, we are looking for a detail-oriented and highly analytical professional to fill this critical role. This full-time position offers the opportunity to be part of a dynamic team while working fully remotely. The selected candidate will play a key role in maintaining the highest standards of quality for our products and services, ensuring they meet both our internal standards and regulatory requirements.As a Quality Inspector 2, the successful applicant will be instrumental in scrutinizing various stages of our production processes, fro

Ennis, TX 75119 • (28 miles) • Full Time • 9/11/2026

The Mechanical Engineer is responsible for the design and redesign of existing products, while paying close attention to continuous improvement and value engineering. Designs include physical perimeter security solutions to include barriers, bollards, bollard covers, wedges, and fencing.Essential Accountabilities:Accurate and complete drawings created and revisions maintained for every product number, manufactured and purchased part number. Creation of accurate, complete and timely submittal drawings according to the documented specifications.Creation of accurate shop drawings with adequate detail to aid the manufacturing process, including a materials list.Meets deadlines and keeps manager informed of known risks.EssentialResponsibilities:Design and redesign perimeter protection products

Waxahachie, TX 75165 • (39.8 miles) • Full Time • 9/11/2026

Overview Join our dynamic team in Duncanville, TX, as a CNC Machinist! We are looking for a skilled individual who is passionate about precision and quality in machining. As a CNC Machinist, you will play a crucial role in our manufacturing process, ensuring that our products meet the highest standards. If you thrive in a fast-paced environment and enjoy working with cutting-edge technology, we want to hear from you! Responsibilities Set up and operate CNC machines to produce high-quality parts according to specifications.Read and interpret technical drawings and blueprints to ensure accurate machining.Monitor machine operations and make adjustments as necessary to maintain quality standards.Perform routine maintenance and troubleshooting on CNC equipment.Collaborate with team members to i

Mesquite, TX 75149 • (40.3 miles) • Full Time • 9/11/2026

Production SupervisorSUMMARY: FNA Group is a world class and leading manufacturer of consumer and industrial pressure washers and other outdoor power equipment. FNA's highly acclaimed brands include Simpson, Delco and CRX. Exclusive licenses with recognizable brands such as DeWalt, Stanley Black & Decker and Craftsman further strengthens FNA's market presence and awareness. FNA is a dynamic organization with unprecedented growth due largely to its ability to attract and retain highly talented associates. We have a challenging and exciting opportunity for a Production Supervisor who is energetic, can multi-task and problem solve, and has the drive and motivation to learn and grow in a fast-paced setting in an expanding business.Primary Purpose:The Production Supervisor is responsible for ma

Dallas, TX 75227 • (43.5 miles) • Full Time • 9/11/2026

Job Title: Mechanical AssemblerLocation: Dallas, TXHire Type: Contract-to-HireShift: OT Offered!1st Shift | Monday–Friday 6:00 AM- 2:30 PM2nd Shift | Monday–Friday 3:30 PM - 12:00 PM**Pay: **$20/hr on 1st shift, $21/hr on 2nd shiftGeneral Purpose:The Mechanical Assembler is responsible for assembling, fitting, and installing mechanical components and subassemblies used in enclosures for data centers. This role requires the ability to follow detailed instructions, interpret technical drawings, and ensure all assemblies meet quality and safety standards. The assembler may also perform minor repairs and assist with troubleshooting production issues.Principal Accountabilities:Read and interpret blueprints, mechanical drawings, work instructions, and bills of materials.Assemble mechanical compo

Rockwall, TX 75032 • (38.5 miles) • Full Time • 9/10/2026

Are we the road to your future?We are currently searching for a Junior level and Senior level CAD Technicianto support ourSouthwest Regionlocated inAustin, Houston, McKinney, Rockwall, Round Rock, San Antonio, or Tyler, TX.The ideal candidate will be responsible for coordination and oversight of geometric design projects.What you’ll be doing:Provide assistance to engineers using OpenRoads Designer to create roadway plan sets and perform minor design work on roadway projectsContribute to project production sheets by adding dimensions and laying out plans, title and detail sheets on production sets of plansPrepare minor mathematical calculations and quantity calculations for roadway/bridge projectsWork with engineers to develop 3D models using both OpenRoads DesignerResearch applicable desig

Mesquite, TX 75149 • (40.3 miles) • Full Time • 9/10/2026

Associated Packaging is looking for amazing and talented people like you! Join our team today and become part of one of the fastest growing companies and industries in the country. Employees of Associated Packaging, Inc. enjoy an energetic and people-first company culture. We are excited to offer a premium benefits package including PTO, Employee Assistance Programs, 401k matching, Health Insurance, Medical Insurance, Dental Insurance, Vision Insurance, and much more!The Equipment Service Technicianprovides excellent technical services and customer service experiences maintaining strong relationships with manufacturers, suppliers, and sales representatives. As such, you must be a positive, energetic leader who excels in working in a collaborative environment.Key Duties & Responsibilities:P

Dallas, TX 75217 • (40.8 miles) • Full Time • 9/10/2026

Dal-Tile is currently seeking an exceptional Machinist II to join our TEAM! As a Machinist II, we need someone who is ready to provide advanced machining support by producing and repairing precision metal parts for manufacturing equipment while following standard operating and safety procedures.$2,000 Sign-on Bonus1st SHIFTMonday-Friday 6:00am-2:30pmPrimary ObjectiveCreates, repairs, and fabricates precision metal parts used in the repair and maintenance of manufacturing equipment across Dal-Tile operations.Major Function and ScopeProduces metal parts for the repair of mechanical and other equipment.Operates manual milling machines, lathes, and other machine shop equipment according to blueprint specifications.Reads and interprets blueprints, drawings, and specifications to fabricate preci

Rockwall, TX 75032 • (38.5 miles) • Full Time • 9/10/2026

Job Title: Mechanical EstimatorLocation: Paris, TexasSalary: $65,000 – $100,000 per year (Based on experience)Job Type: Full-TimeSchedule: Monday – FridayAbout UsAt Harrison, Walker & Harper (HWH), we’ve been building more than structureswe’ve been building trustfor over 100 years. Our culture is built on honesty, integrity, and strong personal relationships, and it’s made us a company people are proud to work for and with.Job OverviewWe’re seeking a skilled and detail-oriented MechanicalEstimator to join our team in Paris, TX.The Mechanical Estimator is responsible for preparing accurate and competitive cost estimates for mechanical construction projects, including HVAC, plumbing, piping, and process mechanical systems. This position reviews construction documents, performs detailed quant

Forney, TX 75126 • (32.6 miles) • Full Time • 9/9/2026

Automation & Controls Engineer Job DescriptionApplicants must be authorized to work in the U.S. without sponsorship now and in the future. The company does not offer visa sponsorship or transfer of visas for this position now or in the future.The Automation & Controls Engineer serves as the lead local resource for automation and controls systems supporting manufacturing equipment. This role is responsible for ensuring safe, reliable, and efficient operation of automation technologies used in the production of energy storage solutions. Working closely with Manufacturing Engineering, Maintenance, Production, Quality, vendors, and global engineering teams, this position drives system performance, standardization, and continuous improvement across the facility.Essential Duties and Responsibili

Dallas, TX 75227 • (43.5 miles) • Full Time • 9/9/2026

DESCRIPTION:Become a key member of our Customer and Support Service Team. We provide training and this position offers a great career advancement opportunities. As an Entry Level Laser Installation Technician, you will be responsible for installing laser equipment and preforming PM’s on the lasers supported by MC Machinery Systems. Utilizing basic mechanical and basic electrical knowledge you will learn on how to install and set up this equipment at customer sites based on plans and drawings. As an Entry Level Laser Installation Technician, you travel to customer sites throughout North America extensively. ESSENTIAL RESPONSIBILITIES:To learn on how to perform equipment installation as well as verify proper operation of machines to the manufacture specifications by performing any needed tes

Terrell, TX 75161 • (25.6 miles) • Full Time • 9/9/2026

Job Summary:An assembler is responsible for putting together component parts or pieces adhering to a specified work order. They verify the correct quantities of components parts and quality checking completed items, manage parts inventory, and use hand tools and mechanical equipment to produce structurally sound products and structures. They also stack finished goods.Essential Responsibilities• Cut raw material, assemble, build parts, and finished goods.• Discern quality of parts and materials used in production.• Inventory parts and tools used in the assembling process.• Follow company procedures and directives.• Stack finished goods.• Uses power tools and mechanical equipment.• Keep a clean and well-maintained workspace.QualificationsFocused attention span.Able to follow written and verb

Sunnyvale, TX 75182 • (39.4 miles) • Full Time • 9/9/2026

Step into 1st shift with a hands-on mechanical role Join a well-established steel manufacturing facility where your mechanical curiosity turns into real-world skill. On our 1st shift team, you will learn by doing, collaborate with experienced assemblers, and see steel components come together under your hands. A day in the life You clock in, review the day's build plan with a lead assembler, and get to work assembling steel parts and equipment. You handle tools with care, ask smart questions, and help the team hit production goals while keeping the work area safe and orderly. What you'll do Assist with mechanical assembly of steel components and equipmentUse hand tools, power tools, and measuring devices to support build tasksFollow direction from lead assemblers and supervisors to comple

Red Oak, TX 75154 • (41.9 miles) • Full Time • 9/8/2026

Company OverviewQarbon Aerospace is a premier manufacturer of cutting-edge composite components and assemblies at all levels of complexity, with products installed on the industry’s most advanced commercial and military aircraft. As a US-based company with a global footprint of more than 1,650,000 ft² of state-of-the-art facilities, Qarbon Aerospace has the capabilities and resources to solve the market’s toughest challenges with Quality Assured. With more than 100 years of experience, we build quality into every fiber, letting your ideas take flight.Tool and Die Maker Entry Level Position OverviewPerform a variety of duties of a training nature in assigned Tool & Die area. Under instruction of a higher classified Tool & Die personnel or supervisor, perform a variety of tool & die duties t

Terrell, TX 75160 • (29.4 miles) • Full Time • 9/7/2026

Benefits:401(k) matchingBonus based on performanceDental insuranceHealth insurancePaid time offVision insuranceJob Description We are seeking an Instrument Operator to support surveying operations on utility and infrastructure projects. This position requires frequent travel and extended time working out of town. The ideal candidate will have experience operating Trimble survey equipment, assisting with utility locating, and working as part of a field crew under the direction of a Party Chief. ResponsibilitiesOperate Trimble GPS and total stations to collect survey data on utility and infrastructure projects.Assist with locating and marking underground utilities using Radiodetection pipe locators.Support the Party Chief with daily survey tasks and field operations.Maintain and care for sur

Wilmer, TX • (36.7 miles) • Full Time • 9/7/2026

Quality Control Manager Location:Wilmer, Tx Employment Type:Full-Time Position OverviewThe Quality Control (QC) Manager provides leadership and oversight of quality control activities for an electrical construction project. This role is responsible for ensuring all electrical installations, prefabricated assemblies, testing, and turnover documentation comply with contract requirements, applicable codes and standards, and Hays Electrical Services’ Corporate Quality Management System (CQMS).Serving as the primary onsite quality lead within HES scope, the QC Manager drives disciplined field execution, inspection compliance, and documentation integrity. This position works closely with project leadership, field supervision, commissioning teams, and client representatives to support inspection

Rockwall, TX • (42.3 miles) • Full Time • 9/7/2026

SPECIALTY METAL FABRICATOR BUILDER OF LEGENDSIf it’s metal, you can cut it, bend it, weld it, and make it last a lifetime. As a Metal Fabricator/Specialist at Lime Media, you’re the one who builds the backbone of our projects from sleek frames to massive structures that stand up to road wear, weather, and wow-factor demands.What You’ll Do· Forge & Fabricate Cut, bend, and shape steel, aluminum, and other metals using saws, shears, presses, and rollers.· Weld Like a Pro MIG, TIG, stick strong, clean welds every time.· Custom Builds Fabricate frames, supports, brackets, and specialty pieces from technical drawings and schematics.· Finish Strong Grind, polish, and prepare metal for coatings or other treatments.· Assembly & Integration Fit metalwork into larger builds for seamless results.· Eq