Von Ormy, TX 78073 • (27.1 miles) • Full Time • 9/9/2026

Benefits:Dental insuranceHealth insurancePaid time offVision insurance Plant Helper – Dry Sand PlantArepet Industries, LLC – Von Ormy, TXFull-Time | 12-Hour Shifts | 4 Days On / 4 Days OffBenefits Health insurance Dental insurance Vision insurance Paid time off Position Summary Arepet Industries, LLC is seeking dependable Plant Helpers to support operations at our dry sand processing and loadout facility in Von Ormy, TX. The Plant Helper performs general labor, housekeeping, equipment support, and production assistance throughout the facility. This is a hands-on industrial position that requires employees to work both indoors and outdoors around processing equipment, conveyors, mobile equipment, truck traffic, sand, dust, and noise. This position is designated as Safety Sensitive and works

Moore, TX 78057 • (23.1 miles) • Full Time • 9/9/2026

Road Ranger is looking for a Subway Team Member to join the team at our Moore, TX location on 1st/2nd shift!Join the Road Ranger family and see how far your drive can take you!At Road Ranger, we aim to provide drivers with the warm hospitality, top tier fuel, quality food, and essential products they need along their journey. We owe our success to our friendly, driven employees who thrive in our fast-paced environment. To reward their hard work, we offer our employees a wide variety of competitive benefits to support their health and wealth, such as:Health, Dental, & Vision InsuranceWeekly PayBonus Potential401(k) with up to 4% company matchLife InsurancePaid VacationPaid ParentalLeaveAccident, Critical Illness, & Short-TermDisability InsurancesAbout Subway Food Service:Road Ranger is a pr

Dilley, TX 78017 • (31.9 miles) • Full Time • 9/9/2026

Installation of pneumatic and hydraulic systems, emergency shutdown systems and equipment under minimal supervision.Layout, measure, fabricate and install tubing tray.Layout, measure, bend, cut, thread, ream and fit hard pipe systems.Install single line and group tubing and fittings.Able to layout and install pneumatic and hydraulic panels and end devices.Demolition of tubing and end devices.Knowledge of industry and American Petroleum Institute standards.Able to read relevant construction drawings.Knowledge of pneumatic and hydraulic control logic.Proficient in the use of tools of the trade.Able to recognize and avoid safety hazards and dangersAll above functions performed with minimal supervision.

Von Ormy, TX 78073 • (27.1 miles) • Full Time • 9/2/2026

Description: The Repair Team Member is responsible for performing skilled manufacturing and assembly operations to ensure products are built, inspected, and prepared in accordance with engineering and customer specifications. This role performs steel fit-up and assembly, material handling, sanding and grinding, equipment inspections, and product readiness activities, including PDI and final shipment preparation. The position may also perform welding, painting, repairs, and other skilled operations as needed. The ideal candidate is safety-conscious, mechanically inclined, detail-oriented, and able to read blueprints, use power and hand tools, troubleshoot issues, and work effectively as part of a team in a fast-paced manufacturing environment.Measure, compare and make simple or complex shop

San Antonio, TX • (43.2 miles) • Full Time • 9/1/2026

Home Care Scheduling and Office CoordinatorCardinal Senior Care | San Antonio, TXFull-Time | In-PersonJoin Our Growing Home Care TeamCardinal Senior Care is looking for a strong and experienced Office Coordinator with Home Care industry experience to help manage and coordinate our busy office operations.This is not an entry-level administrative position. We need someone who understands the fast-paced nature of home care and can confidently handle scheduling, caregiver coordination, recruiting, and daily office responsibilities.You must be:Highly organized and dependableWilling to take ownership and accountability, even in challenging situationsAble to work independently with minimal supervisionStrong in communication and follow-upComfortable using scheduling and office softwareDynamic indi

San Antonio, TX 78264 • (26.3 miles) • Full Time • 9/17/2026

Description: Job Title: Lead Manufacturing EngineerDepartment: Manufacturing Engineering (ME)Reports To: Plant Mgr. (solid line) and dotted line to ME Mgr for functional direction.Status: ExemptDirect Reports: Staff Manufacturing Engineer, and InternsJob Type: Onsite full timeJob Summary:Lead Engineer will support the Continuous Improvement/ME department through the creation, and maintenance of engineering systems. The Lead Engr. is expected to bring concepts and practices focused on Lean/Six Sigma to improve the overall efficiency and effectiveness of Reyes Automotive Group’s manufacturing operations.Main Duties and Responsibilities (Other duties may be assigned)· Support the Plant Manager and Continuous Improvement team with daily tasks.· Implement Lean Manufacturing principles to produc

San Antonio, TX 78224 • (32.6 miles) • Full Time • 9/17/2026

Are you looking for a great career with a dynamic and innovative company? Then come join our team at Assured Quality Systems! AQS is currently hiring Quality Control Inspectors for San Antonio, TX. We pride ourselves on being innovative and strive to be industry leaders. We value our team members and are looking for Quality Control Inspectors who are team players, able to multitask, reliable, and thrive in a fast-paced environment. This posiition starts January 5, 2026!1st SHIFT 6:00AM-6:00PM (or end of production) $15.50 per hour2nd SHIFT 6:00PM-6:00AM (or end of production) $16.00.00 per hourMonday-Saturday2nd Chance Employer:No Experience RequiredOn-the-job Training ProvidedSteel-toe Shoes RequiredBENEFITS:PTO, Sick Leave,Medical, Dental, Vision, SupplementalBiweekly Pay!Requirements:Th

San Antonio, TX 78252 • (33.3 miles) • Full Time • 9/17/2026

Benefits:Health insurancePaid time offVision insurance401(k)Company carDental insuranceEmployee discounts We are seeking experienced Landscape Maintenance Production Manager for our San Antonio, TX location. Position Overview: The Landscape Production Manager is responsible for driving daily field production by leading crews, coordinating schedules, managing materials and equipment, and ensuring efficient rollout of work across all properties. This role is hands-on and fast-paced, focused on execution, accountability, and keeping production moving safely, on time, and on budget. Key Responsibilities:Crew Leadership & Productivity · Lead, motivate, and push multiple landscape crews to meet daily and weekly production goals · Set clear expectations for crew leaders and field staff regarding

San Antonio, TX 78207 • (40.3 miles) • Full Time • 9/17/2026

Company Background and Job Summary Federal Recycling is a leading independent recycling company with 100+ years' experience helping customers recycle their waste and build profitable, sustainable operations. We seek talented individuals to be part of "Where Green is Going" as we deliver the most innovative, forward-thinking recycling and waste management solutions, enabling our customers to become leaders in recycling/waste programs for their industries.Federal Recycling is seeking an experienced Industrial Mechanic to perform preventive maintenance, troubleshoot equipment failures, and repair trailers, forklifts, loaders, balers, and other plant equipment. The ideal candidate has strong mechanical aptitude, welding and fabrication experience, and the ability to diagnose and repair hydraul

San Antonio, TX 78201 • (43.4 miles) • Full Time • 9/17/2026

Calling All Foreman!Are you looking for a change of pace? Consider a career with Tricon-US, LLC in our San Antonio, Texas area. We are a leader in the Construction Industry in search of a Foreman to join us for an amazing fulltime, long-term opportunity with a family-owned company that is ready to make a commitment to you and your career goals. With safety being our top priority, Tricon-US, LLC has exciting plans for 2026. Won't you come and join us?What we ask from you:Possess 4-6 years of related experience in Concrete and Excavation activities.Experience leading crews in a fast-paced environment.Be hardworking, dependable, and safety minded.Willingness to work overtime up to 7 days per week if necessary.The ability to pass a pre-employment and periodic screenings.Ability to communicate

Bexar, TX 78234 • (44.5 miles) • Full Time • 9/17/2026

General SummaryInspects, operates, maintains, tests and repairs boilers, cooling towers and associated control and distribution equipment. Performs maintenance and repair on Central Energy Plant associated equipment to include, medical air and vacuum, electric and diesel air compressors, diesel and natural gas fuel systems, water softeners, pumps, motors, chillers, boilers.Essential Duties and ResponsibilitiesPerforms operations and maintenance on rotating machinery in accordance with applicable manufactures recommendations, local, state and federal regulations.Observes and interprets reading on gauges and meters which register various aspects of the Central Energy Plant to include boilers and chillers operations.Adjusting controls to ensure safe and efficient operations of the plant meet

San Antonio, TX 78264 • (26.3 miles) • Full Time • 9/17/2026

General Description:· The Injection Molding Production Technician is responsible for supporting safe, stable, and efficient injection molding operations. This position provides technical leadership in mold changes, process setup, troubleshooting, process validation, and continuous improvement.· The technician works closely with Production, Engineering, Quality, Tooling, and Maintenance to identify and correct abnormalities, reduce process variation, improve product quality, shorten cycle times, and lower manufacturing costs. This position also coordinates and develops mold setters, standardizes production procedures, and ensures injection molding processes produce optically, cosmetically, and dimensionally acceptable products.Essential Duties and Responsibilities· Promote a safety-first wo

San Antonio, TX • (43.2 miles) • Full Time • 9/17/2026

We are seeking a skilled Thermoformer Machine Operator to join our food production team. In this role, you will be responsible for setting up, operating, and troubleshooting automated rollstock thermoforming packaging machinery, specifically ULMA equipment focused on vacuum packaging. You will ensure products are safely sealed, correctly labeled, and meet strict quality and food safety standards. Key Responsibilities Setup, calibrate, and operate ULMA roll stock thermoforming machinery during daily production runs. Perform film changeovers (top and bottom web), mold/die swaps, and adjustment of sealing temperatures and vacuum levels. Inspect finished packages continuously for seal integrity, vacuum loss, proper print orientation, and label accuracy. Perform basic mechanical troubleshooting

San Antonio, TX 78201 • (43.4 miles) • Full Time • 9/17/2026

Senior Mechanical Engineer, PE (Building Design)Company Name: Michael Baker InternationalLocation: San Antonio, TXProject Focus: Healthcare, Mission Critical, Higher Education, Commercial, Critical InfrastructureWork Setting: Office-Based CollaborationSalary: $109,000 – $189,000 (Based on Experience) + Bonus Potential & Full BenefitsRecruited Exclusively By: Luxus | AEC Talent PartnersPosition OverviewThis is a leadership opportunity for a Senior Mechanical Engineer, PE to drive the design and execution of high-performance building systems across complex and mission-critical projects. In this role, you will lead mechanical engineering efforts from concept through construction while collaborating with multidisciplinary teams to deliver innovative, resilient, and technically advanced solutio

Charlotte, TX 78011 • (4.4 miles) • Full Time • 9/16/2026

Plant Technician Job Description **Charlotte, TX Plant** **** Full time - 40-hour standard work week with the need to flex up as necessary. Includes weekend shifts. Work hours will generally be between 6am - 6pm ****Clements Fluids is looking for a dedicated and mechanically inclined Plant Technician to join our team. This is an exciting opportunity for someone with experience in drilling fluids or oil and gas services who enjoys working in a fast-paced, hands-on environment. We are looking for a process driven, motivated individual who thrives in a team atmosphere and takes pride in getting things done.Clements Fluids exists to unearth and unleash the God-given potential inevery well and every person we encounter. Since 1985, we’ve builtrelationships on a foundation of trust, discipline,

Von Ormy, TX 78073 • (27.1 miles) • Full Time • 9/16/2026

Sandy Oak Materials is seeking an experienced Night shift Wash Plant Operator for our Sand plant in Poteet, TX. Position Summary Sandy Oak Materials is a new Frac Sand producer seeking an experienced Wash Plant Operator for our night shift. The Wash Plant Operator is responsible for operations of the wash plant function and monitoring. Employees are expected to operate all equipment in a safe manner. As a result, basic mechanical skills are required for maintenance of equipment and assistance to overall plant maintenance. Position ResponsibilitiesKey duties of the Wash Plant Operator include but are not limited to: Operation and knowledge of wash plant startup/shutdown procedures.Assist maintenance department in maintaining the wash plant equipment.General labor, as neededQualificationsCap

San Antonio, TX • (43.2 miles) • Full Time • 9/16/2026

Are you ready to be a Weekend Warrior? Are you adedicated and detail-orientedindividual with a strong work ethic? Atop manufacturerin San Antonio is looking forpunctual and reliablecandidates to join their assembly team, and we want to hear from YOU! Aspart of theManufacturingAssembly Team, you'll play a crucial role inoperating machinery,assembling mechanical and electronic components, and ensuringsafety protocolsare followed in the warehouse. If you have a positive attitude, effective communication skills, and a strong desire to learn, this is the perfect opportunity for you to grow! Responsibilities:Assemblemechanicaland electronic componentsfollowingspecificationsanddaily productions goals.Operatewarehouse equipmentincludingelectric hand tools, small overhead cranes, pallet jacks, etc

San Antonio, TX • (43.2 miles) • Full Time • 9/16/2026

We're looking for automotive mechanics with a minimum of 3 years of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500.As an Experienced Auto Technician, you will perform a full range of automotive repairsfrom light maintenance to heavy engine workand diagnostics on our vehicles, including:Performing general to complex repairs on all makes and models, ranging from timing belts and suspension systems to heavy engine work.Diagnosing and repairing advanced vehicle electrical issues, including work on electric and hybrid vehicles.Completing repairs for wheel bearings and axles, as well as vehicle climate control systems including ACs and heater cores.At Carv

San Antonio, TX 78201 • (43.4 miles) • Full Time • 9/16/2026

Job Title: Avionics Mechanic (Associate) – Electronics Technician II – C-17 ModsJob DescriptionThis role supports modification, testing, and troubleshooting of avionics and electrical systems on C-17 and other heavy aircraft platforms. You will apply advanced technical knowledge to perform complex diagnostics, assembly, installation, and operational testing of aircraft systems and wire bundles, working both on the bench and on the flight line in accordance with Department of Defense and industry directives.ResponsibilitiesApply advanced technical knowledge to solve avionics and electronics problems that cannot be resolved solely by referencing manufacturers’ manuals or standard documents.Analyze circuits and signal flows, calculate waveforms, and determine interrelationships of circuits wh

Adkins, TX 78101 • (43.8 miles) • Full Time • 9/16/2026

Production Welder (Bilingual English/Spanish) Location: Adkins, TX 78101Job Type: Full-Time | On-SiteSchedule: Monday - Thursday | 7:00 AM - 5:45 PMPay: $22.00 per hourReports to: Production Supervisor / Area LeadAbout Us Top Metal Solutions is seeking experienced and dependable welders to join our fabrication and manufacturing team as a Production Welder. This position is ideal for individuals who can consistently produce high-quality welds, maintain production efficiency, and work independently in a fast-paced manufacturing environment.As a Production Welder, you will play a critical role in the fabrication of metal structures, components, and assemblies used in a variety of industrial and commercial projects. This role requires strong welding skills, attention to detail, production con

San Antonio, TX 78223 • (36.5 miles) • Full Time • 9/16/2026

SUMMARY: Reporting to the Sr QA Manager, the QA Manager aids in ensuring the production and distribution of products meet or exceed all quality standards, in addition to adhering to company and regulatory standards. He/She also supports the continuous quality improvement program that which includes quality control and quality assurance.Cuisine Solutions, a premium, fully cooked frozen food manufacturer, has an immediate opening for an Engineer. You will work in a safe, high-end environment. In fact, this facility was recently named a top food production plant by Food Engineering Magazine.LOCATION: 8339 Sous Vide Way San Antonio, TX 78223SHIFT: 7am-3:30pmEXPERIENCEMinimum of 3 years' or more managing Quality and Food Safety Operations preferably in a sous-vide food-manufacturing environment

San Antonio, TX 78205 • (41.1 miles) • Full Time • 9/16/2026

Position SummaryCommitment to leading a mission critical environment that values continuous improvements. This position manages the installation and maintenance of mechanical systems at Data Centers and operations of specialized cooling systems. Acts as an Engineering resource for the complete H5 portfolio of mission critical facilities. Plans and monitors Building Management Systems and mechanical measurements. Maintains design documentation. Provides full life-cycle support to H5 Data Centers from concept design through site implementation and operations.This position reports to the Senior Vice President.Essential Job FunctionsParticipate in all aspects of mechanical design and engineering including development of basis of design, scope of work, implementation processes and commissioning

San Antonio, TX 78238 • (42.5 miles) • Full Time • 9/16/2026

GENERAL PURPOSE OF JOB: To provide a fun, safe and efficient racing environment for our customers.ESSENTIAL DUTIES AND RESPONSIBILITIES:· Prepare track and karts prior to opening· Instruct new customers on proper kart usage, race flag usage, and racing safety· Maintain an orderly and speedy flow of racers through the track(s)· Supervise ongoing races and enforce race policies and procedures· Respond to emergency situations as they arise· Ensure that the pit and track areas remain clean and safe· Perform specific facility cleaning and maintenance duties as assigned by management· Perform closing duties to secure the pit and track and prepare for the following day’s operationEDUCATION and/or EXPERIENCE:No prior experience or training.REASONING ABILITY:Ability to apply common sense understand

San Antonio, TX • (43.2 miles) • Full Time • 9/16/2026

Industrial Maintenance TechnicianFull TimeSan Antonio, TX, USSalary Range: $25.00 To $30.00 AnnuallySeeking a highly skilled Industrial Maintenance Technician to support the optimal performance, safety, and reliability of overhead cranes, material handling equipment, industrial machinery, and facility equipment. In this role, you will apply hands-on expertise in troubleshooting, equipment inspection, mechanical repair, and preventive maintenance to support customer facility operations, minimize equipment downtime, and improve production efficiency.ResponsibilitiesPerform routine equipment inspections, preventive maintenance, service, and repairs on a wide range of industrial equipment, including overhead cranes, below-the-hook lifting devices, hydraulic systems, pneumatic systems, electric

San Antonio, TX • (43.2 miles) • Full Time • 9/16/2026

Expert Manual Machinist5500 N. Loop 1604 E., San Antonio, TX 78247 Full-Time | Mon Fri, 7:00 AM 4:00 PM | $32 $40 per hourAbout Cox ManufacturingCox Manufacturing is a family owned and operated organization. Our purpose is to love God, love people, and advance American Manufacturing. We provide high volume, precision-machined parts from bar stock to a variety of customers. As one of the largest precision-turned factories in the nation, we are growing with patented technology and apprenticeship opportunities. Our core values Teamwork, Continuous Improvement, Perseverance, and Excellence drive everything we do. If this is you, great. If not, you should search for a career elsewhere.The ideal person for this role has spent years behind a lathe and knee mill and doesn't need training wheels.

San Antonio, TX • (43.2 miles) • Full Time • 9/16/2026

Description: Join the Team That’s Building the Future of Fiber!Zero dB Communications (ZdB) is one of the West Coast’s fastest-growing full-turnkey fiber optic contractors. Founded in 2011 and led by Zach Kuhlmann, we’ve built a reputation for delivering high-quality design, engineering, construction, splicing, and testing across the western United States. With 90+ years of combined OSP experience, our team knows how to build networks that perform today and stand strong tomorrow.From FTTH and Metro-E to long-haul P2P, data center builds, and 24/7 emergency response, we take on the industry’s toughest projectsand we do them right. If you want to join a team known for precision, reliability, and tackling complex fiber challenges, ZdB is where you belong.Description:This ia an itinerant field

San Antonio, TX • (43.2 miles) • Full Time • 9/16/2026

AI/ML Engineer Applied AI & Intelligent AutomationRemote Active Secret Clearance RequiredBuild AI That Moves Into ProductionRackner is seeking an AI/ML Engineer to help shape how artificial intelligence is evaluated, built, governed, and deployed across a federal data modernization environment.This role goes beyond isolated prototypes or model development. You will help determine where AI can create meaningful operational value, whether AI is the right solution, and how promising use cases move from concept into production.You will have the opportunity to build AI applications, agents, intelligent workflows, and automation while also influencing how emerging AI and LLM technologies are evaluated, governed, monitored, and adopted. Your work may span use-case assessment, solution design, pro

San Antonio, TX 78264-3641 • (43.2 miles) • Full Time • 9/16/2026

Description: TOOL & DIE TECHNICIAN – NIGHT SHIFTPOSITION OVERVIEWJoin a stable, growing automotive manufacturing team where your Tool & Die expertise truly makes an impact. As a Tool & Die Technician on our night shift, you’ll take ownership of maintaining, repairing, and improving production dies to ensure high-quality, defect-free parts. This role is hands-on, technical, and essentialideal for experienced professionals who take pride in precision work and problem-solving.You’ll perform preventative maintenance, troubleshoot production issues, and complete repairs using welding, grinding, machining, and die component fabrication. Whether you're modifying existing dies or building new components, you’ll play a key role in supporting continuous production.WHAT YOU’LL DOPerform maintenance a

San Antonio, TX • (43.2 miles) • Full Time • 9/16/2026

Position is IN OFFICE in Midland TX - NOT REMOTE.EXAMPLES OF WORK PERFORMEDTransform survey information, initial sketches, and concept designs using Civil3D into construction plans, generally including:Existing ConditionsDimensioned Site PlanSite Grading & Drainage PlansSite Utility PlansRoadway Plan and Profile DrawingsDetailed Street Intersection DesignsUtility Plan and Profile DrawingsDrainage and Hydraulic Structure Design and Details- Work with engineer to modify plans from mark-ups and design revisions- Coordinate design with Architects and other engineering consultants- Revise plans according to client, manager, or agency reviewer comments and redlines- Self-Review performed work for completeness and accuracy prior to submitting to manager- Work closely with project manager to deter

San Antonio, TX • (43.2 miles) • Full Time • 9/16/2026

DROP BURY TECHNICIAN – QCPosition Type:Full-TimePay:Starting at$800 per week, based on experience and productionJob SummaryWe are seeking a dependable and detail-orientedDrop Bury Technician – QCto perform residential and commercial drop-bury installations while ensuring all completed work meets company and customer quality standards.ResponsibilitiesPerform drop-bury installations and underground cable placement.Ensure cable is buried at the required depth and properly routed.Inspect completed work for quality, accuracy, and compliance with installation standards.Identify and correct installation deficiencies or quality issues.Verify that work areas are properly restored after installation.Complete required job documentation, photos, and quality-control reports.Follow all safety procedures

San Antonio, TX 78211 • (34.7 miles) • Full Time • 9/15/2026

Description: CDL A Heavy Equipment Operator Apprentice I$26.84 - $28.52 /Hour + Overtime | Company Paid Benefits | Paid Training | Build a Career in Railroad Emergency ResponseFull-Time |Travel Up to 50% | 24/7 Emergency Response OperationsTurn Your CDL Into a CareerHulcher Services is looking for motivated individuals with a Class A CDL who are ready to build a career operating specialized heavy equipment used in railroad derailment response and recovery.This isn't a typical driving job. You'll receive hands-on training while working alongside experienced operators to learn how to safely recover derailed railcars and locomotives using cranes, hydraulic equipment, and other specialized machinery.If you enjoy challenging work, operating equipment, traveling, and being part of a team that re

San Antonio, TX 78227 • (37.3 miles) • Full Time • 9/15/2026

SUMMARYHave you worked in the mission critical/emergency power/power generation industry as a Project Manager? If so, we want to hear from you. We are seeking someone who will be responsible for providing estimates, collaborating and coordinating with other departments, and will partner with the production team to meet customer specifications for the Von Ormy and Seguin facilities.RESPONSIBILITIESCollaborate with the sales team to provide competitive estimates for customersTrack project status, communicate with stakeholders, and identify potential issuesCollaborate with production team to maintain quality and customer satisfactionAssemble and notate drawings for productionDevelop the best practices and tools for project execution and managementConduct project post-mortems and create recomm

San Antonio, TX 78204 • (39.4 miles) • Full Time • 9/15/2026

Description: Job PurposeThe Electrical Engineer will have overall responsibilities for the electrical design on a project. The position will collaborate and direct other electrical staff during the design and documentation of the electrical system. The position will coordinate the electrical design with all other disciplines so that the design is completely coordinated internally as well as with external clients.Duties and ResponsibilitiesThe primary duties and responsibilities of this position include the following:Prepare design documents appropriate for the project and in accordance with company standards.Monitor project status and development to meet project deadlinesCoordinate the completion of the documents in the appropriate time to have a QA/QC review completed prior to the deadlin

San Antonio, TX • (43.2 miles) • Full Time • 9/15/2026

SummaryThe Production Control II role is responsible for ensuring efficient management of production schedules, addressing material shortages, supporting interdepartmental collaboration, and overseeing external service processes. This position requires strong organizational skills, the ability to manage production-related issues, and continuous communication with various departments to ensure that production flows smoothly and that any challenges are resolved in a timely and effective manner. This role is key in maintaining the efficiency and accuracy of operations, driving improvements, and supporting the overall success of production projects.Essential Duties and ResponsibilitiesProduction Problem ResolutionConfer with production personnel to identify and resolve production challenges.Ac

San Antonio, TX • (43.2 miles) • Full Time • 9/15/2026

Location:San Antonio, TXEmployment Type:Full-TimeShift Options:1st Shift: 7:00 AM – 3:30 PM2nd Shift: 3:00 PM – 11:30 PMAbout the Organization Our client is a leading provider in the food manufacturing industry, specializing in the development and production of high-quality, innovative food solutions for customers across various markets. The organization is committed to maintaining the highest standards of food safety, quality, and operational excellence through advanced manufacturing practices and strict compliance with industry regulations.With a strong focus on continuous improvement, sustainability, and customer satisfaction, the company fosters a collaborative work environment where employees play a key role in ensuring product quality and safety. Team members have the opportunity to

San Antonio, TX • (43.2 miles) • Full Time • 9/15/2026

DUTIES SHALL INCLUDE: Supports the development and implementation of QC methodologies to ensure compliance with QA standards, guidelines and procedures in a logistical based organization. Supports the development and definition efforts of major and minor characteristics of quality including quality metrics and scoring parameters and determines requisite QC resources for an actual effort. Maintains a process for evaluating QC methodologies to comply with standards, capture data generated by new mission set like equipment work orders, life cycle maintenance, AARs, QC messages, pending work orders with open item follow ups, scheduled parts replacement, Defense Medical Logistics Standard Support (DMLSS)/MMIS data management, and trends analysis. Conducts and/or participates in formal and infor

San Antonio, TX • (43.2 miles) • Full Time • 9/15/2026

OEM, Inc. is an established engineering and manufacturing company with more than 46 years of industry experience. We design, fabricate, manufacture, and support specialized safety testing equipment used throughout the oil and gas industry, serving customers in more than 50 markets worldwide.We are seeking a motivated Mechanical Engineerto join our engineering team. This position is ideal for an engineer who enjoys designing products, solving manufacturing challenges, improving engineering processes, and taking ownership of projects from concept through production.This role reports directly to the Engineering Manager and works closely with manufacturing and salesto develop innovative, manufacturable, and cost-effective solutions.Responsibilities:Design and develop new products, assemblies,

San Antonio, TX • (43.2 miles) • Full Time • 9/15/2026

Integrity Manufacturing is hiring a full-time CNC Accurpress Brake Operator inSan Antonio, Texas.Position SummarySet up and operate a CNC Accurpress brake machine to bend, form, and shape aluminum sheet metal parts according to technical blueprints and precision tolerances.Schedule & CompensationHourly Rate: DOE (Depends on Experience).Shift: 6:00 AM – 5:00 PM.Days: Monday through Thursday.Work Week: Four 10-hour days.Overtime: Mandatory as production requires.BenefitsHealth: Medical insurance.Dental: Dental insurance.Vision: Vision insurance.Retirement: 401(k) with 4% company match.Time Off: Paid Time Off (PTO).Key ResponsibilitiesMachine Operation: Setup and run CNC Accurpress brake presses.Program Loading: Select and load the correct CNC programs.Tooling Setup: Select, install, and alig

San Antonio, TX • (43.2 miles) • Full Time • 9/15/2026

Position:Production ManagerLocation:San Antonio, TXIndustry:Food Manufacturing (mandatory)Client : Food And Beverage Manufacturing ClientSalary Range:$70,000 – $76,000 (FIXED NOT A DOLLAR MORE) Position OverviewThe Production Manager will lead and optimize production planning and execution across multiple U.S.-based manufacturing facilities, ensuring on-time delivery, efficient resource utilization, and strong cross-functional alignment.Key Requirements 5+ years of experience in production planning / supply chain / manufacturing operationsFood manufacturing experience is requiredStrong hands-on experience with ERP/MRP systemsAdvanced Exceland data analysis skillsExperience supporting shift-based production environmentsAbility to work cross-functionally with Procurement, Logistics, and Oper

San Antonio, TX 78201 • (43.4 miles) • Full Time • 9/15/2026

Gillette Air Conditioning Company Inc's commitment is to fulfill our customer's needs by serving the community and the mechanical industry by contributing its time, leadership, and expertise in providing professional mechanical installation and service.Our most important asset is our family of skilled, loyal, and professional employees.Achieving customer satisfaction will assure long-term stability, profitability, growth, and personal and career fulfillment for all.YOUR COMFORT IS OUR COMMITMENTGillette Air Conditioning is committed to our core values: Safety: By being alert, aware, and planful.Professional: Through integrity, leadership, structure, and consistency.Relationships: Built upon faith, family, teams and our customers.Ingenious: Bringing innovation, resources, adaptability, and

Bexar, TX 78234 • (44.5 miles) • Full Time • 9/15/2026

Quality Control ManagerSummary of Position The Quality Control (QC) Manager is directly responsible for the execution of on-site construction engineering activities and the implementation of required quality control systems for federal government projects. The QC is the key personnel in determining acceptance or rejection of all work in progress and completed work activities. Must be able to oversee the quality of construction projects and ensuring all work meets the standard of contractual obligations. In charge of verifying all materials received for the project meet project and company needs. Prepare quality control reports on a daily basis and submit them to a contracting officer, as well as prepare weekly and monthly reports as required by their company. Being able to manage multiple