Telford, TN 37690 • (40.3 miles) • Full Time • $60,000 to $85,000 / yr • 10/31/2026

Summary: This position is responsible for performing repair work, troubleshooting problems and commissioning new installations at ebm-papst customer locations throughout North America. Essential Function of the Job: The essential functions of this job require the person, with or without reasonable accommodation, to perform the following: Work independently to coordinate and execute mechanical repair work at customer locations as needed Troubleshoot problems in the field by taking simple electrical measurements or using more advanced techniques resulting from training provided Complete any required documentation including field reports Willingness to travel to customer sites within North America approximately 50%-75% of the time, primarily but not exclusively, during the normal work week. A

Asheville, NC 28801 • (44.4 miles) • Full Time • 10/30/2026

RVE, an Ardurra Company, is seeking an Electrical Engineering Intern in our Asheville, NC Office This candidate will work under general supervision and perform assignments of limited scope that require the application of standard engineering techniques, procedures, and criteria in carrying out a sequence of related tasks. Projects may include electrical system design, power distribution, lighting systems, electrical load calculations, equipment selection, fire alarm systems, emergency power systems, and related building and infrastructure improvements. The intern will gain hands-on experience supporting the design and analysis of electrical systems for a variety of building and infrastructure projects. Primary Function: The Electrical Engineering Intern will work under supervision to suppo

Asheville, NC 28801 • (44.4 miles) • Full Time • 10/30/2026

Description: Join our team as a Project Engineer within our Utilities (Water/Wastewater) practice area. This is a hybrid role based out of our Asheville, North Carolina office. In this role, you will contribute to the planning, design, and management of water and wastewater treatment facilities, pump stations, distribution, and collection systems. You will oversee project execution, develop process designs, coordinate with multidisciplinary teams, and ensure compliance with regulatory standards. Ideal candidates have experience in water/wastewater treatment processes, hydraulic modeling, permitting, and construction administration, with a passion for delivering sustainable and resilient water infrastructure solutions. Assist in the design of water and wastewater treatment systems, pump sta

Asheville, NC 28801 • (44.4 miles) • Full Time • 10/30/2026

Description CAGE Engineering is a respected leader in civil engineering, land surveying, and construction management, known for delivering practical, high-quality solutions tailored to each client's needs. Our land development work spans residential, commercial, industrial, and institutional projects. Our team is committed to excellence and integrity, and we offer a collaborative, supportive environment where team members can grow. Join us and become part of a company that values expertise, invests in its people, and drives projects that shape communities for the better. Position Overview As a Civil Engineer Intern with CAGE, you will join a design team working on real client projects from day one, no busy work. You will develop technical skills in Civil 3D and site design, and build profe

Asheville, NC 28801 • (44.4 miles) • Full Time • 10/29/2026

ENGINEER I - CIVIL PRACTICE Three Notch Group Charlotte, NC | Asheville, NC Company Overview Three Notch Group is a Top 400 ENR design firm with over 80 years of experience, dedicated to delivering a wide range of services, including Field and Lab Services, UST, Environmental, Utility, Transportation, Geotechnical & Construction Engineering, and Civil/Site Development. We foster a collaborative environment where team members can build lasting friendships, support one another, and guide our clients in shaping their futures. With offices across the Southeast, including seven in Alabama, two in North Carolina, one in Florida, one in Georgia, and one in Tennessee, we offer an exceptional opportunity for personal and professional growth. If you’re ready to make a difference and advance your car

Knoxville, TN 37901 • (38.8 miles) • Full Time • $26.00 to $30.00 / hr • 10/29/2026

Description Client looking for 2 travel technicians to grow their team. This role will work on new store buildouts, upgrades, franchise conversions, and more. It is a 75%+ travel position that may be out of town at least 3 weeks of the month, typically Monday-Friday (travel days Monday and Friday, work Tuesday-Thursday). The geographic zone is the whole country depending on where help is needed. For locations within driving distance, techs will use either a company vehicle or their own (and be reimbursed for mileage). For locations farther away, flights will be booked by TA. Hotel (Holiday Inn Express or Hilton) and meal allowance are provided as well. TA currently has over 300 truck stops and plans on adding at least 35 more in the next 12 months, mostly on the west coast/California. The

Mars Hill, NC • (37.6 miles) • Full Time • 10/29/2026

Full-time Hybrid (Average of 2-3 days in office per week) Mars Hill, NC $90,000 - $120,000 + benefits About Us The Ammortal Chamber integrates five science-backed modalities into one immersive session. Our clients include wellness clinics and spas, sports teams and athletic departments, hotels, and individuals who bring the Chamber into their homes. We are a small team with a startup culture. Hardware and software engineers, health professionals, and operators work side by side. Since shipping our first product we have grown steadily, and the software that drives the Chamber is now at the center of what comes next. This role offers hands-on experience across the whole product, close mentorship from a senior engineer, and the chance to see your work running in the field. What is this role a

Asheville, NC 28801 • (44.4 miles) • Full Time • 10/28/2026

Job Description: We are looking for a Systems Engineer to support manufacturing automation, robotics, and controls at the Pratt & Whitney manufacturing site in Asheville, NC. The candidate will help establish and implement automation strategies to improve manufacturing performance and support new product development. Key Responsibilities: Support the development and execution of manufacturing automation strategies. Support automation requirements for new product development. Develop and execute manufacturing methods and identify process optimization opportunities. Establish and enforce site standards for controls, robotics, and automation. Support Ethernet networking and automation network equipment maintenance. Troubleshoot hardwired components and resolve technical issues. Support automa

Asheville, NC 28801 • (44.4 miles) • Full Time • 10/28/2026

At Optima Engineering , an employee-owned MEP engineering consulting firm, we focus on delivering high-quality mechanical, electrical, plumbing, fire protection, and technology design solutions for buildings across the Southeast. Our projects include higher education, municipal, K-12, and commercial facilities. We are looking for a skilled and dedicated Electrical Engineer to join our team and help us continue to provide thoughtful and efficient designs for our clients. Requirements Registration as a Professional Engineer (PE) in North Carolina Bachelor’s degree in Electrical Engineering or related field. Minimum of 5 years of experience in MEP building systems design for higher education, municipal, K-12, and/or commercial facilities. Proficiency in Revit and/or AutoCAD required. Strong c

Knoxville, TN • (42.2 miles) • Full Time • 10/27/2026

Company Description With over $2B in revenue, 80+ manufacturing facilities across 6 continents and over 9,000 employees worldwide, Signode is a leading manufacturer of a broad spectrum of transit packaging consumables, tools, software, and equipment that optimize end-of-line packaging operations and protect products in transit. Signode brings this extensive product portfolio together under hundreds of trusted brands to offer complete transit packaging solutions to its customers. We produce strap, stretch and protective packaging. We also manufacture packaging tools and equipment used to apply the bulk packaging materials. These commercial packaging products are used to pack, bundle, unitize, protect, and secure goods during warehousing and transit. Our company is a pioneer in the industria

Asheville, NC 28801 • (44.4 miles) • Full Time • 10/25/2026

Field Service Technician – Direct Load Control Pay: $24/hour Travel: Up to 95% Schedule: Full-time; occasional weekend travel and on-call rotation required Education: High School Diploma or equivalent Position Overview We are seeking a Field Service Technician to support residential energy programs through the installation, inspection, modification, removal, and service of Direct Load Control (DLC) devices. This is a hands-on field position that is ideal for someone with basic HVAC, electrical, mechanical, construction, or technical experience who enjoys working independently and interacting with customers. Extensive travel is required, and candidates must be comfortable traveling to different job sites as needed. Responsibilities Install, inspect, modify, remove, and service Direct Load C

Asheville, NC 28801 • (44.4 miles) • Full Time • $92,000 to $151,800 / yr • 10/24/2026

POSITION SUMMARY: Established forward thinking Engineering firm located in Durham, North Carolina is seeking an engineer with 5+ years of relevant experience in HVAC/mechanical system design as well as plumbing and fire protection systems design for educational, commercial and industrial facilities to expand its Asheville, North Carolina Office. PRIMARY DUTIES: Design of HVAC systems for commercial, industrial, and education facilities Hydronic system (chilled and hot water) piping design as well as ductwork and mechanical equipment sizing is also required. Understands construction plan documentation including architectural, structural and MEP systems Knowledge of HVAC, Fire Protection, and Plumbing Preparation of construction documents including drawings, specifications, calculations, and

Newport, TN 37821 • (0 miles) • Full Time • 10/23/2026

Benefits: Training & development Bonus based on performance Competitive salary Employee discounts Flexible schedule Our Seasonal Field Support Technician isresponsible for completing the set-up and break-down of our kiosks in various local retail stores at 29 locations in East Tennessee. Tasks include driving a moving truck, carrying equipment into the location, setting up kiosk, and location maintenance. Ideal candidate will possess knowledge of computer/tech installation. Seasonal position with opportunities for advancement and possible permanent position for the right candidate. Perks: Flexible Schedule Options – Work that works for you! Corporate discount program Professional development and continuous training Work in a fast-paced, innovative culture with an open and collaborative env

Asheville, NC 28804 • (42.2 miles) • Full Time • 10/23/2026

Who We Are Artisan Studios, a leading digital innovation consultancy, crafts elegant digital solutions that accelerate success for our clients. We are a team of talented, compassionate, and inclusive professionals who share a passion for technology and an unwavering drive to grow. Our work spans from application and infrastructure modernization to cloud migration, AI engineering, and custom end-to-end product development. We're looking for a Staff Engineer to join our team of Artisans! About the Role This is a senior individual contributor role. You lead through technical direction, standards, and your own work, not through direct reports. You work across all teams and client engagements in the engineering organization. You set the technical bar, find risk early, and step in hands-on where

Knoxville, TN • (42.2 miles) • Full Time • $120,000 to $150,000 / yr • 10/23/2026

We are currently hiring a Senior Fire Protection Engineer / Team Leader in our Building Engineering division in one the following locations: Rochester, NY Buffalo, NY Albany, NY Poughkeepsie, NY Ithaca, NY Syracuse, NY Elmira, NY Richmond, VA Chattanooga, TN These are on-site positions. Relocation assistance will be considered to candidates hired outside of these areas. The Building Engineering Division at LaBella provides complete building engineering services including mechanical, electrical, plumbing, fire protection, and structural engineering. Services range from feasibility studies and analysis through project design and construction. Our engineers are well versed in new construction, renovations, additions, analysis, special structures, and design/build projects for a variety of cli

Canton, NC 28716 • (41.8 miles) • Full Time • 10/21/2026

ConMet’s Canton, NC plastics manufacturing facility is seeking a skilled, hands-on Manufacturing Engineer with excellent technical troubleshooting skills, a collaborative mindset, and a demonstrated ability to identify, diagnose, and resolve production issues in a fast-paced manufacturing environment. This role offers an excellent opportunity for an engineer who thrives on supporting manufacturing operations by analyzing processes and driving efficiency improvements across both new and existing production lines. What You Will Do: Provide engineering support for daily plant operations in an Automotive environment. Primary focus on assembly operations Perform root cause analysis, process troubleshooting, and corrective action implementation, with a focus on preventing recurring production, q

Waynesville, NC • (35.7 miles) • Full Time • $18.50 / hr • 10/20/2026

What Success Looks Like (Objectives): What You’ll Do: You’ll visit customers’ homes, solve problems, and introduce them to smart home tech. Install and service DISH equipment and smart home products in customers’ homes Teach customers how to use their tech and offer additional services when helpful Keep a clean work area and maintain a professional attitude while working independently but staying connected with the team What’s in it for You: Career Growth: Start here and grow fast! Many of our leaders began in this role, with opportunities to move into different departments for new challenges Pay Increases: Automatic promotion after 6 months with a $1/hour raise. Additional promotions with 5–10% pay increases based on performance Bonus Potential: Earn up to $6,400 your first year, and up t

Weaverville, NC 28787 • (41.4 miles) • Full Time • 10/20/2026

Job Title: Manufacturing Engineer Location: Weaverville, NC Reports to: Engineering Manager Employment Type: Full-time Seniority Level: Mid-Level Industry: Manufacturing | Mechanical Power Transmission Components | Engineering Services Job Function: Manufacturing Engineering | Process Improvement | Equipment Development Job Summary: Plan, direct, and support manufacturing processes and personnel in a CNC machining environment. Research and resolve production problems, establish and implement standard requirements for equipment, tooling, and methods. Determine best utilization of equipment, material, and personnel. Key Responsibilities: Equipment Development and Implementation Develop and implement new production equipment to enhance manufacturing capabilities. Ensure equipment meets produc

Asheville, NC 28801 • (44.4 miles) • Full Time • 10/16/2026

Title: Restoration Engineer Location: Asheville, NC (Hybrid) Job Type: Regular Full-time What’s the Opportunity? Anchor QEA is seeking a full-time senior-level engineer and project manager to support Anchor QEA in the delivery of innovative projects across the southeast and nationwide, including marsh and estuary restoration, coastal restoration, riverine and stream restoration, compensatory mitigation, fish passage, living shorelines and engineering with nature and nature-based solutions. The applicant will have 8 or more years of experience providing restoration-related field assessments, data collection and analysis, hydraulic and hydrologic modeling, geomorphic and habitat assessment support, fish passage and restoration design, and construction and project management. We are committed

Knoxville, TN 37912 • (44.2 miles) • Full Time • 10/14/2026

Description: Summary/Objective The field service technician is responsible for troubleshooting electro-mechanical problems, completing installations, and performing unscheduled repairs and scheduled maintenance on equipment, based upon customer demand and need; and to provide complete customer satisfaction in a polite and professional manner. Essential Job Functions: Effectively analyzes problem situations pertaining to breakdowns of customer equipment and recommends to customer actions necessary to correct situation. Exhibits a professional demeanor and promotes goodwill between the company and customers by providing a superior level of customer service. Observes, analyzes, and determines corrective course of action for service and repair of customer equipment. Performs necessary repairs

Knoxville, TN 37901 • (38.8 miles) • Full Time • 10/13/2026

BIS Digital is a technology company providing integrated communication solutions using audio, video, presentation, and computer systems. Since 1982 the mission of BIS Digital has been to create the best digital recording solutions available in the marketplace. Position: Field Technician The Field Technician will perform various roles providing customer service for commercial and government agency clients. This includes installing new equipment and software, troubleshooting existing systems, providing routine maintenance, as well as providing both remote and onsite support. This position requires the technician to go onsite to customer locations and may require extensive travel within an assigned state or area. Additional work is required from a home office. The technician will spend 50-75%

Asheville, NC 28806 • (43 miles) • Full Time • $23.00 to $25.00 / hr • 10/12/2026

Construction Field Technician Position Summary Timberline Construction Group (TCG) is seeking a Construction Field Technician to support disaster recovery and housing reconstruction projects in the Asheville, North Carolina region. This role assists with subcontractor oversight and is responsible for completing QA/QC inspection reports and submitting the reports with photo documentation of the work that has been completed on mobile home installation and residential home reconstruction projects. This position is ideal for candidates with construction field experience who enjoy working onsite, coordinating with contractors, and solving problems in the field. Key Responsibilities • Monitor subcontractors to ensure work meets scope, schedule, and quality standards • Provide daily field updates

Knoxville, TN • (42.2 miles) • Full Time • 10/9/2026

TAIT is a proud partner of the DoD SkillBridge Program and is proud to offer career opportunities to U.S. Armed Forces members as a way of recognizing the unique skills and qualities that our military personnel possess.The DoD SkillBridge Program is an opportunity for service members to gain valuable civilian work experience through specific industry training, apprenticeships, or internships during the last 180 days of service. Please visit our website at TAIT.com to learn more about the opportunities available. Qualifications Current Active Duty Servicemember Separating from the Military in 4-12 months Able to complete a minimum of 8 weeks and up to a maximum of 6 months SkillBridge apprenticeship. Able to complete 40 hours per week. Mechanically minded. Position Description This position

Waynesville, NC 28786 • (37.3 miles) • Full Time • 10/3/2026

Project Engineering Technician I Location: Waynesville, North Carolina Status: Full- Time - Entry-Level Overview of Bunnell-Lammons Engineering, Inc. At Bunnell-Lammons, Inc. (BLE), every member of our team has a personal stake in ensuring the success of our clients. As employee-owners of the firm, we are all personally accountable for building lasting relationships and delivering outstanding results. We put people first, whether that's our clients, our employees, or our community. It's why we listen more and work harder to understand the unique needs of our clients. And it's why we prioritize the career development of every individual on our team. People are why we do this, and why we love what we do. We are at our best when we work together. That means bringing together a diverse team of

Morristown, TN 37815 • (16.9 miles) • Full Time • $90,000 to $120,000 / yr • 10/23/2026

Continuous Improvement Engineer - Established Manufacturer with Great Benefits and Competitive Salary This Jobot Job is hosted by: Sean Copeland Are you a fit? Easy Apply now by clicking the "Apply" button and sending us your resume. Salary: $90,000 - $120,000 per year A bit about us: We are a growing OEM supplier located in Morristown TN Why join us? Meaningful Work! Best in Class Company! Competitive Compensation Package! Complete Benefits Package! Flexible Work Schedules! Accelerated Career Growth! Fun Company Activities! Many More! Job Details BSIE or BS and equivalent experience Minimum 5 years experience in Continuous Process Improvement with demonstrated success. Experience and capability to mentor others utilizing continuous improvement tools (e.g., Value Stream Mapping, Kaizen eve

Knoxville, TN 37902 • (40.6 miles) • Full Time • 10/31/2026

Come work for OHM Advisors, the Community Advancement firm. With the singular mission of Advancing Communities , our diverse 800+ team of professionals works collaboratively across multiple service areas in multiple states, including architecture, engineering, planning, surveying and construction engineering. We are a team of experts with individual specialties working together, driven to make a difference through people-focused problem solving, design and ideas. In everything we do, we put people first. We create places for communities of people that help solve a problem and drive them forward advancing the whole community today and well into the future. What You Will Contribute to OHM Advisors As a Water Resources Project Engineer, you will play a key role in the design, implementation,

Gatlinburg, TN 37738 • (26.4 miles) • Full Time • $52,000 to $100,000 / yr • 10/30/2026

Location: Nationwide Why CCI? CCI Systems, Inc. is an Employee-Owned Telecommunications Company based in Iron Mountain, MI with 60+ years of industry knowledge and experience. Our outstanding team-based work culture and environment has allowed us to grow, develop, and retain long-term employees. We offer a comprehensive benefits package, competitive pay, flexibility, paid on-the-job training, overtime, professional development, and inspire you to be bold, yet accountable. We value our employee’s hard work and determination and REWARD results all while having fun! Our mission is to make life better by connecting people through innovative communication systems. We are seeking Field Walkout Engineers who will perform walkouts for an entire town and/or subdivision to create field notes for new

Knoxville, TN 37917 • (40.2 miles) • Full Time • $1,000 to $1,200 / wk • 10/30/2026

Job Summary Review customer information to create models for manufacturing purposes and edit any changes based on customer preferences. Job Responsibilities Use 2D and/or 3D computer assisted design/drafting software to develop designs of new and existing product. Draft fully detailed multi-view shop drawings from sketches and order information provided by customers. Maintain and follow Drafting and Engineering Standards. Maintain an organized file system for production drawings. Communicate with sales, engineering, and manufacturing regarding new and revised prints. Review drawings for completeness and accuracy. Maintain revisions of project drawings. Provide timely technical assistance and solutions to the team. Participate in project meetings as required. Other duties as assigned. Requi

Tazewell, TN 37879 • (38.6 miles) • Full Time • 10/30/2026

We are seeking an experienced Customer Quality Engineer to serve as the primary quality liaison between our manufacturing facility and assigned automotive OEM and Tier 1 customers. This position will play a key role in managing customer quality concerns, corrective actions, customer performance metrics, audits, and continuous improvement initiatives. The ideal candidate has experience in automotive quality systems, strong problem-solving skills, and the ability to communicate effectively with both customers and internal teams. Key Responsibilities Serve as the primary quality contact for assigned automotive customers. Manage customer complaints from initial notification through containment, root-cause analysis, corrective action, and closure. Lead structured problem-solving activities usin

Rockford, TN 37853 • (41.1 miles) • Full Time • 10/30/2026

Ampcus Inc. is a certified global provider of a broad range of Technology and Business consulting services. We are in search of a highly motivated candidate to join our talented Team. Job Title: Technical Process Engineer Location(s): Rockford, TN Position Summary We are seeking a temporary entry-level Process Engineer to work in day-to-day manufacturing scenario of scintillatormaterials for PET molecular imaging applications. The candidate will work in a production-oriented environment focused on process execution, equipment operation, documentation, and scale-up from development into large-volume manufacturing. This role requires daily operation of production and laboratory equipment, support of controlled material-processing steps, and close collaboration with the R&D team to ensure pro

Knoxville, TN • (42.2 miles) • Part Time • 10/30/2026

Title: Adjunct Instructor – Mechanical Engineering Technology Required Documents Needed to Upload at Time of Application: • Resume • Unofficial Transcripts Position Summary: To provide quality instruction for student learning and to maintain a positive learning environment in the classroom. The major emphasis will be placed on teaching and evaluating students in the classroom and laboratories. Department: School of Technology, Engineering & Math Duties and Responsibilities: 1. Planning and teaching classes as assigned and as outlined in the course descriptions and course syllabi. 2. Supervising the study and learning activities of students assigned. 3. Submitting requests through the department head, program coordinator, or lead teacher for equipment, supplies, textbooks, and other instruc

Knoxville, TN • (42.2 miles) • Full Time • 10/30/2026

Description We are looking for a Roadway Design Engineer in Knoxville, TN with the opportunity to work on signature projects and collaborate with other design staff. HMB is part of a transportation family ranked #14 in the country with unlimited growth potential. We have national capabilities but maintain a local feel. Engaged professionals are the heart of our vision statement. That’s why we strive to create a work environment that challenges and inspires our employees, igniting their passion and drive to achieve greatness every day. Key Responsibilities Support the completion of roadway design tasks through collaboration with project teams and mentorship from senior engineers · Work closely with Project Managers to ensure designs meet schedule and budget expectations · Gain valuable expe

Morristown, TN 37814 • (19.5 miles) • Full Time • $100,000 to $125,000 / yr • 10/28/2026

Shape the future of safe, reliable heat. Picture a typical morning in Morristown, TN: you arrive at our stateoftheart Precision Boilers facility (a Thermon company), grab a coffee, and open the latest control panel layout you drafted for an electrode steam generator. By midmorning you’re conferring with shop assemblers to confirm wire routing is servicefriendly. After lunch, you’re refining a PLC routine for an AllenBradley platform and validating component selections against NEC, NFPA, UL, and CSA codes. Before the day ends, you’re on a quick call helping a field tech troubleshoot an I/O anomaly at a customer site. That’s a day in the life here. About Thermon and Precision Boilers Thermon is a global leader in industrial process heating, temperature maintenance, environmental monitoring,

Greeneville, TN 37743 • (19.9 miles) • Full Time • $110,000 to $125,000 / yr • 10/28/2026

Reliability Engineer Position Overview We are seeking an experienced Reliability Engineer to improve equipment performance, minimize unplanned downtime, and drive continuous improvement within an industrial manufacturing facility. This individual will develop and implement reliability strategies that enhance operational efficiency, improve equipment availability, and support safety and environmental compliance. The ideal candidate will have a strong background in mechanical equipment reliability, predictive and preventive maintenance, and root cause failure analysis. This role will work closely with maintenance, engineering, and operations teams to identify equipment issues, implement corrective actions, and improve long-term asset performance. Key Responsibilities Develop and implement eq

Knoxville, TN • (42.2 miles) • Full Time • 10/28/2026

Maintenance Engineer We are seeking a skilled and reliable Maintenance Engineer to support the overall upkeep and functionality of our property. This role includes performing routine maintenance, addressing guest requests, and ensuring all systems operate safely and efficiently. The ideal candidate has a strong work ethic, basic knowledge of building systems, and a commitment to providing a safe and well-maintained environment. Schedule: 5 days 3pm-11-1130pm Key Responsibilities You will help ensure our hotel runs smoothly by maintaining and repairing various systems and equipment. Your daily tasks will include performing routine maintenance, diagnosing and fixing issues, and assisting with upgrades and installations. You will report to the Engineering Supervisor or Chief Engineer. A caree

Knoxville, TN 37914 • (33.8 miles) • Full Time • $85,000 to $105,000 / yr • 10/27/2026

Design and CNC Programming Manager, Steel Pool Products Location: Knoxville, Tennessee Corporate Island Campus and Manufacturing Center (2901 Leisure Island Way, Knoxville, TN 37914) Join the Explore Industries Team! At Explore Industries, we’re more than just a leader in swimming pool design and manufacturingwe’re a team driven by respect, integrity, and innovation. We believe in empowering our employees, fostering collaboration, and delivering top-quality products that set industry standards. We are hiring a Design and CNC Programming Manager to lead product design, CNC programming, and technical documentation for our steel packaged pool product line. This on-site role is based at our Knoxville manufacturing facility and works with the sheet metal fabrication equipment it programs. You w

Knoxville, TN 00000 • (42.2 miles) • Full Time • $140 to $150 / yr • 10/27/2026

This is a remote position. Design Hire seeking an experienced Sr Nuclear Engineer with a background in Extended Power Uprate or Measurement Uncertainty Recapture projects within commercial nuclear power generation. This opportunity is open to engineers with expertise in nuclear systems, electrical, instrumentation and controls, reactor engineering, or licensing. Candidates with nuclear plant systems and operations experience are highly preferred. Responsibilities Support engineering activities associated with EPU and MUR projects, including plant modifications, technical evaluations, and system performance assessments. Perform and review engineering calculations, analyses, design documentation, and technical reports supporting nuclear plant operations and power uprate initiatives. Evaluate

Knoxville, TN • (42.2 miles) • Full Time • 10/27/2026

Path Construction is seeking qualified college graduates to join our organization in the Knoxville, TN area. We are a rapidly growing commercial general contractor with offices in Arlington Heights, IL; Knoxville, TN; Charlotte, NC; Tampa, FL; Phoenix, AZ; and Dallas, TX working on projects throughout the United States. Typical duties of a Project Engineer includes managing day-to-day activities of subcontractors and suppliers, contract administration, procurement, estimating, pay requests, change orders, requests for information, cost control, scheduling, tracking submittals, maintaining and delivering a high level of quality. The right candidate will have construction management internship experience on large and/or small projects and varying asset classes including, but not limited to:

Morristown, TN • (16.8 miles) • Full Time • 10/26/2026

Job Title: Process Industrial Engineer (PIE) Title of Supervisor(s): Operations Manager Job Location: Morristown, TN Company Website: www.greenworkstools.com Power Innovation. Drive Continuous Improvement. Greenworks Tools is a leading manufacturer of battery-powered outdoor power equipment and utility vehicles, delivering innovative solutions for homeowners, landscaping professionals, and commercial customers worldwide. From residential and commercial mowers to off-road utility vehicles, Greenworks is helping build a more sustainable future through cutting-edge battery technology. We are seeking a Process Industrial Engineer (PIE) who is passionate about Lean Manufacturing, automation, and operational excellence. This position plays a critical role in improving manufacturing performance b

Knoxville, TN • (42.2 miles) • Full Time • 10/26/2026

Location: East Tennessee (Relocation Assistance Available) A leading manufacturing organization is seeking a Staff Mechanical Engineer to provide technical leadership and engineering support within a large-scale continuous manufacturing operation. This position plays a key role in equipment reliability, capital improvements, troubleshooting, and driving operational excellence across maintenance and production teams. What You'll Do Support maintenance and operations by troubleshooting equipment failures and restoring production flow. Lead root cause investigations and implement long-term corrective actions. Manage major equipment rebuilds and capital improvement projects from justification through execution. Serve as a subject matter expert for critical mechanical systems and equipment. Ide

Knoxville, TN • (42.2 miles) • Full Time • 10/26/2026

Mechanical and Machining Engineer (Ceramics) Knoxville, TN 37931 | On site | Direct hire Do you know how to machine ceramics? Then this role was built for you. Plenty of engineers can program a CNC and cut metal. Far fewer can hold tight tolerances on technical ceramics using wire EDM, diamond grinding, and CNC milling. You'll design and machine components that serve a critical function in nuclear reactors, both reactors already in commercial operation and next-generation reactors being designed, built, and tested right now. This isn't a role where you run someone else's process. You'll build the in-house machining capability, lead production and prototype tooling, and shape how new products get made from the drawing stage forward. Must Haves To be considered, you'll need all three of thes