Please Accept our Privacy Policy
McCarter Electrical
Laurinburg, NC • (34.1 miles) • Full Time • 11/22/2026
THIS JOB HAS NO PER DIEM RESPONSIBILITIES AND AUTHORITY: To carry out the assignments given and to guide, direct and assist other classifications as needed. To attain maximum productivity making sure the project is done in a safe and cost-effective manner. Follow all rules of the safety and employee manual, comply with the McCarter Fleet Policy and as follows: 1. Responsible for carrying out the company safety policy at the work level. 2. Identify and correct hazardous and unsafe conditions in the work area. 3. Assist supervision ensuring all material, tools and equipment are available to do the job. 4. Erect and maintain safety barriers to protect the public and any others. 5. Aid any injured employee in getting prompt medical attention. JOB REQUIREMENTS: Duties are to include; 1. Must poScott Safety
Monroe, NC 28110 • (34.3 miles) • Full Time • 11/21/2026
Quality Inspector III is responsible for ensuring that the product received from Scott Safety’s Supply Chain is inspected thoroughly against all applicable requirements and specifications stated on relevant documentation. This individual will play an important role in qualifying product through First Article Inspections, and identifying non-conforming product on the front end to prevent down time, and scrap. This position is progressive to the Quality Inspector II position and would require at least 3 years of experience in role OR demonstrate skills and ability as listed below. DUTIES AND RESPONSIBILITIES Perform Receiving Inspection and First Article Inspection on incoming product. Use databases and ERP systems to document material transfers in and out of the Quality Warehouses. Use variIgnis Global Recruitment
Florence, SC • (41.8 miles) • Full Time • 11/21/2026
Salary: Up to $130K base depending on experience and location, plus an annual performance-based bonus Location: Fully remote, anywhere in the US near a major airport The consultancy Fire protection and life safety consulting engineering firm Growing its process safety team, with food manufacturing a big sector for the firm Salaried roles with flexible schedules, and project coordinators who book your travel and handle expenses The role Leading and performing combustible dust hazard analyses (DHAs) Fire and explosion protection work alongside the DHAs Technical scope Combustible dust hazard analyses to NFPA 652, 654, 660, 61, 484 and 664 Explosion protection: venting, suppression and isolation Fire protection for industrial processes Requirements An engineering or engineering technology degDRT Holdings, LLC
Midland, NC 28107 • (43.6 miles) • Full Time • 11/21/2026
Are you a skilled Swiss Lathe Machinist who takes pride in producing high-precision parts? We're looking for a motivated Swiss Lathe Machinist to join our growing manufacturing team. This position is responsible for the setup, operation, inspection, and on a Swiss Lathe machine while ensuring safety, quality, and production goals are met. If you enjoy problem-solving, working with advanced equipment, and being part of a team that values craftsmanship and continuous improvement, we'd love to hear from you! Key Responsibilities Machine Setup & Operation: Set up and operate conventional Swiss Lathe. Blueprint Interpretation & Planning: Study blueprints, drawings, and specifications to determine dimensions, tolerances, sequence of operations, and setup requirements. Tooling & Fixturing: SelectSalute Mission Critical LLC
Hamlet, NC 28345 • (25 miles) • Full Time • $75,000 to $105,000 / yr • 11/21/2026
A Commissioning Agent (CxA) has a technical background and in-depth expertise with the commissioning process including verification techniques, functional performance testing, system equipment and O&M knowledge. The role of the Support Mechanical Commissioning Agent (CxA) is to act as a third-party authority systematically verifying that mechanical systems are functioning in accordance with the design intent and Owner’s Project Requirements (OPR). Some of the actions of the Commissioning Agent will include verification and testing during all 5 levels of commissioning, as per ASHRAE Guideline 0. This role requires significant travel, with expectations of up to 50-75% annually, especially if you are not currently residing near one of our key job site locations such as: Jackson, MS Atlanta, GQUALITY EQUIPMENT LLC
Clio, SC 29525 • (32.9 miles) • Full Time • $50,000 to $80,000 / yr • 11/21/2026
We are a John Deere dealer with 36 locations serving a diverse group of agricultural, commercial, and residential customers in North Carolina, South Carolina, and Virginia. At Quality Equipment, we pride ourselves on our commitment to our customers, our employees, and our community. Our employees and management stay close to our customers and strive to serve them quickly and in ways that make sense in each local area. Our work culture is ethical, entrepreneurial, and hard working. We work with excellent people every day – our customers and our co-workers. Our work is challenging and offers a great deal of variety in the tasks we do. At Quality Equipment, we strive to be the premier John Deere dealer in our region by serving our customers with commitment and integrity. We offer the opportunAmerican Wood Fibers, Inc
Laurinburg, NC 28352 • (35.6 miles) • Full Time • 11/21/2026
American Wood Fibers (AWF) is a manufacturer of both consumer and industrial products that are sold to multiple manufacturers as well as pet, agricultural, and home-heating markets. AWF is comprised of 450+ employees and holds operations at 11 locations, generating over $100M in annual sales revenue. We are currently seeking a candidate for the 2nd Shift Senior Millwright/Electromechanical Technician role in our Laurinburg, NC facility . JOB SUMMARY The Senior Millwright/Electromechanical Technician will operate in a safe and efficient manner of troubleshooting and repairing equipment and machinery. The primary duties include: MAINTENANCE Performs scheduled maintenance repairs of production equipment and provides emergency/unscheduled repairs of production equipment during production. PrepIcon Aerospace
Indian Trail, NC 28079 • (39.6 miles) • Full Time • 11/21/2026
Job description Icon Aerospace has an exciting opportunity as an ATE Technician Under general supervision, this position is responsible for ensuring the ATE team's compliance with FAA regulations for Part 145 repair shop by inspecting, testing, troubleshooting and repairing equipment used on aircrafts. Training to specifics of this position will be provided. Detailed Description: Assist with troubleshooting faults in electronic circuits and systems using various types of test equipment e.g., Special Test Equipment "STE", Automated Test Equipment "ATE", data analyzers, microprocessors emulators, circuit testers, oscilloscopes, and multi-meters. Assist with reading and interpreting production illustrations (PI), wiring diagrams, schematics, understanding symbols, flag notes, and general noteTown Of Stallings
Matthews, NC 28104 • (41.7 miles) • Full Time • 11/21/2026
The Town of Stallings is seeking a highly motivated, skilled, Planning Technician. An employee in this class performs a variety of specialized administrative, customer service, record-keeping, and GIS duties in support of the Planning and permitting processes for the Town. Employee provides information to developers, contractors, and homeowners regarding the zoning, sign, demolition, and other permits processes, reviews and interprets relevant Town ordinances to assist customers in obtaining proper permits, receives and routes applications, accept applicable fees, issues approved permits, schedules and coordinates compliance inspections, and tracks permits. Work also includes greeting the public, explaining requirements, establishing electronic and hard copy records, handling complaints, pSalute Inc.
Matthews, NC 28105 • (44.7 miles) • Full Time • $75,000 to $105,000 / yr • 11/21/2026
A Commissioning Agent (CxA) has a technical background and in-depth expertise with the commissioning process including verification techniques, functional performance testing, system equipment and O&M knowledge. The role of the Support Mechanical Commissioning Agent (CxA) is to act as a third-party authority systematically verifying that mechanical systems are functioning in accordance with the design intent and Owner’s Project Requirements (OPR). Some of the actions of the Commissioning Agent will include verification and testing during all 5 levels of commissioning, as per ASHRAE Guideline 0. This role requires significant travel, with expectations of up to 50-75% annually, especially if you are not currently residing near one of our key job site locations such as: South Dallas, TX LubboOceanaGold Haile Processing
Kershaw, SC 29067 • (28.8 miles) • Full Time • 11/21/2026
Company Description OceanaGold is a global intermediate gold and copper producer with more than 35 years of exploration, development and operating experience. We have four operating mines – Haile in the USA, Macraes and Waihi in New Zealand, and Didipio in the Philippines and a global workforce of ~5,400 employees and contractors. Our people, assets, and strategy are core to our success. Guided by our values-Care, Respect, Integrity, Performance, and Teamwork-we strive to be a trusted company people want to work for, partner with, supply and invest in, to create value. We are committed to safe and responsible mining that generates strong returns and contributes to sustainable development in the regions where we operate. OceanaGold is listed on the Toronto and New York Stock Exchanges (TSX:Goken
Norwood, NC • (34.7 miles) • Full Time • 11/21/2026
Headquartered in Dublin, Ohio (USA) with Engineering Centers in Pune, India and Yokohama, Japan, Goken is a global Engineering Services and Product Development company founded in 2004. We partner with OEMs and suppliers across the mobility space, as well as clients in non-mobility industries, to deliver innovative solutions and accelerate product development. At Goken, we embrace our motto of "Time to Innovate" by pushing boundaries, cultivating entrepreneurial thinking, and empowering individuals who thrive on tackling challenges, embrace fresh ideas, and are driven to create solutions that shape the future. This mindset fuels our mission and empowers our teams to solve complex problems, deliver measurable value, and move our clients and industries forward. Our Vision is to empower associPremier Trade Services
Oakboro, NC 28129 • (37.3 miles) • Full Time • $28.00 to $34.00 / hr • 11/21/2026
Premier Trade Services is currently seeking an experienced Industrial Electrician to join our team in Oakboro, NC. *This is a great opportunity for a skilled electrician looking for a long-term position with the potential to transition from temporary to permanent employment* *Local Work Opportunity, No Per Diem Offered or Relocation Package* Why Electricians Choose This Opportunity: Earn a $500 Sign On Bonus : $250 after 90 days and an additional $250 after 180 days Earn up to a $300 Referral Bonus : $150 after your referral works 200 hours and another $150 after they reach 400 hours Overtime opportunities based on project demand PPE and work shirts provided Consistent hours for Electricians who want stable income Duties include, but not limited to: Cutting, bending, threading and runningNortheast Tool & Mfg
Matthews, NC 28104 • (41.7 miles) • Full Time • 11/20/2026
Step into a day on our shop floor At Northeast Tool & Manufacturing in Matthews, NC (just outside Charlotte), you’ll begin your shift by reviewing setup sheets and engineering prints for aerospace components that demand exacting precision. You’ll stage tooling, dial in offsets, run a first-article, verify results with gauges and digital metrology, then move into steady production-keeping an eye on tool wear, machine health, and surface finish. When parts roll off within spec, you’ll document results, complete any secondary operations, and keep your area buttoned up with 5S. What you’ll handle Operate a mix of equipment-5-axis mills, conventional mills, multi-axis mill-turns, lathes, and Wire EDM-to create precision metal parts for aerospace applications. Interpret blueprints, drawings, speCathay Home Inc
Lancaster, SC 29720 • (37.4 miles) • Full Time • $26.44 to $40.86 / hr • 11/19/2026
Benefits: Competitive salary Opportunity for advancement Paid time off The Industrial Mechanic is responsible for ensuring the peak operational efficiency, safety, and reliability of all automated and semi-automated machinery within our pillow manufacturing facility. This role goes beyond standard repairs; you will actively analyze machine performance, reduce downtime, and implement mechanical engineering modifications to optimize the production of foam, fiber-fill, down, and ergonomic pillows. Responsibilities Preventative & Corrective Maintenance: Perform routine inspections, calibrations, and emergency repairs on specialized pillow production equipment including high-speed fiber carding machines, blowing systems, automated stitching/sewing lines, foam slitters, compression packaging uniPattison Sign Group Inc Plant
Heath Springs, SC 29058 • (39.1 miles) • Full Time • 11/19/2026
SETTING Pattison ID is a highly successful, North American Company growing organically and through ongoing acquisitions. It is one of the world’s largest sign and physical branding element companies, with six (6) manufacturing facilities, eight (8) sales and operations offices and over 1000 employees across North America. Pattison ID has many segments, such as Signage, Architecture, Digital, Maintenance and Leasing. The company is dedicated to absolute customer satisfaction and the ultimate quality in its products and services. The culture of the company is focused on performance and accountability and supports employee empowerment and development. The company operates independently within The Jim Pattison Group, headquartered in Vancouver, and comprised of over 800 locations worldwide. ThProTrade LLC
Peachland, NC 28133 • (17.4 miles) • Full Time • $26.00 to $35.00 / hr • 11/19/2026
ProTrade is seeking a skilled Millwright for upcoming shutdown and maintenance work. We’re looking for a hands-on, mechanically inclined jack of all trades who can hit the ground running and get the job done right. What You’ll Be Doing: Assisting with scheduled shutdown and maintenance operations Turning wrenches and performing mechanical repairs and installations Changing out pumps and rotating equipment Performing welding as needed on site Supporting millwright duties across various systems and equipment What We’re Looking For: Strong mechanical aptitude - jack of all trades mentality Millwright background or equivalent hands-on industrial maintenance experience Welding ability - must be able to come on site and pass a weld test Comfortable working in a fast-paced shutdown environment ReAkona Process Solutions
Monroe, NC • (33.2 miles) • Full Time • 11/19/2026
Akona Process Solutions unites four trusted brands-Spiroflow, Kason, Cablevey, and Marion-to deliver advanced material handling and processing systems. With over 200 years of combined expertise, we design mixers, dryers, screeners, conveyors, and complete bulk handling solutions that enhance efficiency, hygiene, and performance across food, pharmaceutical, nutraceutical, and chemical industries. Headquartered in Charlotte, NC, Akona serves customers worldwide through centers of excellence in the USA, UK, and Germany. Position Summary The Panel Builder is responsible for assembling, wiring, testing, and troubleshooting industrial control panels, electrical enclosures, and related equipment according to engineering drawings, schematics, and customer specifications. This position requires strSURTECO NORTH AMERICA INC
Monroe, NC 28110 • (34.3 miles) • Full Time • $22.98 to $28.24 / hr • 11/19/2026
If you're looking for a collaborative work environment with an established organization that also offers great employee benefits and career advancement opportunities, then we invite you to consider applying for a position with SURTECO. SURTECO specializes in the production and sale of laminates, foils and vinyl-coated fabrics. Our technologies, products and services deliver distinctive performance features, thus helping to support our Customers’ reputations for trusted brands around the globe and in a wide variety of markets. We are seeking an individual who is passionate about joining a team in the manufacturing of high quality laminates and films used in a variety of applications including on cabinetry in kitchen and bath applications, countertops and paneling in recreational vehicles anConsolidated Metco
Monroe, NC 28110 • (34.3 miles) • Full Time • 11/19/2026
ConMet is currently seeking a creative, collaborative and skilled Manufacturing Engineer to join our Advanced Manufacturing team to support our growing machining operations for our aluminum and ductile iron products. The role is based in Monroe, NC. This role serves as on-site technical representative of the Advanced Manufacturing Engineering (AME) team, acting as primary local owner of Aluminum Hubs and Iron Drum machining of wheel end products. This person is responsible of machining equipment, tooling and inspection specifications, validation and change readiness at the Monroe, USA and Monterrey, Mexico machining facilities. This person serves as the technical authority for machining processes, engineering changes, audits, and specification compliance in support of launches and change iMega Force
Aberdeen, NC 28315 • (44.4 miles) • Full Time • $23.00 / hr • 11/19/2026
Can you turn a sketch into a reliable, precision part? If you thrive on solving real manufacturing problems and bringing complex drawings to life, this role is for you. You’ll craft custom components and replacement parts, keeping operations running and partnering with maintenance and engineering to shape practical design solutions. Note: This mirrors publicly available nVent Aberdeen Machinist information that references fabricating custom components and replacement parts and collaborating with maintenance and engineering to develop effective design solutions. Challenges You’ll Tackle Translate drawings, blueprints, and work instructions into accurate machining plans. Set up and operate manual and/or CNC machines to produce one-off and short-run parts. Choose the right materials, tooling,P3 Services
Mount Gilead, NC 27306 • (34.2 miles) • Full Time • 11/18/2026
Job Overview: The Portable Restroom Technician is responsible for assisting in the delivery, setup, servicing, and pickup of portable restrooms at various locations. Working under the direction of an experienced technician, this role includes helping to load, transport, clean, and maintain portable restrooms while ensuring a high level of customer satisfaction. This is a physically demanding, outdoor position requiring punctuality, reliability, and attention to detail. Key Responsibilities: Setup and Delivery : Help load and deliver portable restrooms to event sites, construction locations, or other designated areas. Pickup and Removal : Aid in the breakdown and retrieval of portable restrooms after events or as required. Equipment Handling : Help with handling hoses, pumps, and other saniM.C. Dean, Inc
Hamlet, NC 28345 • (25 miles) • Full Time • 11/18/2026
Overview In this role or as a Test Technician you will lead and perform inspection, testing, troubleshooting, maintenance, repair, and start-up of low and medium voltage electrical distribution equipment, including breakers, transformers, switches, switchgear, relays, and motor control centers, as well as other electrical apparatus both in the field and in a shop environment. An understanding of sophisticated electrical distribution systems as well as the use of complex electrical test equipment is required. You will contribute to a safe working environment for co-workers and customers and help ensure the overall success of projects. Local, regional, and national travel is required, ability to travel internationally is preferred. Responsibilities Coordinate, lead, and support multiple projExpress Employment Professionals - Monroe, NC
Matthews, NC 28105 • (44.7 miles) • Full Time • $24.00 to $28.00 / hr • 11/18/2026
Auto- CAD Operator Location: Indian Trail, NC Area Pay: $24–$28/hour, depending on experience Shift: Monday–Thursday, 7:00 AM–4:30 PM; Friday, 7:00 AM–12:00 PM Role Overview We are seeking an experienced CAD Operator to create permit and shop drawings for highly customized projects. This position works closely with project management, sales, engineering, and R&D teams to ensure drawings are accurate and ready for production. Key Responsibilities Create permit and shop drawings using AutoCAD Manage multiple drawing projects and deadlines simultaneously Prepare drawings for internal review and engineering approval Support the bill of materials process through accurate drawings and documentation Review and check your own work for accuracy before submitting drawings for final review CollaboratHunter The Head Hunter
Cheraw, SC 29520 • (9.4 miles) • Full Time • $75,000 to $100,000 / yr • 11/17/2026
R&D Scientist – Bakery Applications Location: Cheraw, South Carolina (Onsite) Industry: Food Ingredients / Commercial Bakery / Food Manufacturing About the Opportunity Thymly Products, an established manufacturer of specialty food ingredients and customized bakery solutions, is seeking an R&D Scientist / Bakery Applications Specialist to join its expanding operations in Cheraw, South Carolina. This is an exciting opportunity to play a key role in the launch of a new 52,000-square-foot manufacturing and blending facility while working directly with company leadership and supporting the continued growth of its commercial bakery business. We're looking for someone who brings a combination of hands-on formulation expertise, technical problem-solving skills, and an outgoing, customer-focused peHandyman Connection Of Matthews, NC
Matthews, NC 28105 • (44.7 miles) • Full Time • $28.00 to $32.00 / hr • 11/16/2026
Benefits: Weekday Schedule Mileage Reimbursement Free uniforms Opportunity for advancement Training & development Bonus based on performance Handyman Connection of Matthews | Matthews, NC 28105 (serving South Charlotte, Matthews, Waxhaw, Pineville) Pay: $28–$32 per hour, plus a 32–35 hour guaranteed weekly floor. Weekday schedule. Steady, year-round work. The job We're a professional home-repair company, not a day-labor or gig outfit. We're looking for experienced craftsmen who can run most jobs on their own - and pitch in with the crew on the bigger ones. You'll handle a real variety of residential repair, maintenance, and remodeling work: carpentry, drywall, minor plumbing, minor electrical, and general repairs - with only occasional painting. You'll talk with customers, keep a clean jobHarris Mechanical Rebuilds, LLC
Lamar, SC 29069 • (37.7 miles) • Full Time • $25.00 to $35.00 / hr • 11/16/2026
Benefits/Perks Competitive Compensation Great Work Environment Convenient Schedule Job Summary We are seeking a Machinist to join our team! As a Machinist, you will be working with a variety of manual milling machines, manual lathes and manufacturing equipment as needed and per drawing or job order specifications. You will also be setting and maintaining your equipment as needed, assisting other machinists with larger tasks, and maintaining a safe work environment. The ideal candidate has exceptional attention to detail, previous experience in an industrial environment, and the ability to work well with minimal supervision. Responsibilities Set up, operate, and maintain machine tools to produce and repair precision parts. Machine variety of materials to drawing or order specifications, holAalberts Integrated Piping Systems
Pageland, SC 29278 • (17.9 miles) • Full Time • 11/15/2026
Quality Engineer - Pageland, SC Ready to change the future, your way? This is an excellent opportunity for a driven Quality Engineer to unlock your ambition and work the future at Aalberts. As a full-time Quality Engineer in the Quality Department at Aalberts, located in Pageland, SC, you will have direct responsibility for the quality of incoming components and finished goods. The Quality Engineer will work with our suppliers to ensure quality standards are communicated and met. the Aalberts way Aalberts is built on entrepreneurship. We believe the more space people are given, the greater their chance of finding brilliant solutions for our customers. That is why we encourage everyone to take ownership, think independently yet work as one team. You are in charge today of what happens tomorQuality Enclosures, Inc.
Albemarle, NC 28001 • (42.3 miles) • Full Time • $18.00 to $19.00 / hr • 11/15/2026
We are looking for a dependable, hands-on teammate to join our glass tempering production team. This role is a good fit for someone with manufacturing, production, construction, warehouse, equipment, or other physical work experience who takes pride in doing the job right. Glass experience is not required. We will train the right person on our equipment, process, paperwork, and quality standards. What we need from day one is reliability, attention to detail, urgency, and the willingness to stay productive without someone standing over your shoulder. This is a physical, fast-moving production environment. Successful teammates learn the machine, understand the process, prepare for the next order, notice quality concerns, and help keep the area moving. Over time, this role develops into a skiMcGee Corporation
Matthews, NC 28105-5098 • (44.7 miles) • Full Time • 11/15/2026
Description: McGee Corporation is seeking a skilled CAD Drafter to join our team. As a family-owned business since 1961, we pride ourselves on offering stable employment, competitive benefits, and a supportive work environment. The CAD Drafter position is responsible for producing detailed drawings and specifications based on information provided by customers and engineers. The ideal candidate is detail-oriented, skilled in AutoCAD, and thrives in a fast-paced, collaborative environment. Schedule: 7:00 AM to 4:30 PM Monday - Thursday, Friday 7:00 AM to Noon. CAD Orafter Key Responsibilities: Review project files for accuracy and completeness Determine proper project dimensions based on customer requirements and deck panel limitations Produce precise project drawings with accurate dimensionTalnt
Matthews, NC • (44.7 miles) • Full Time • $80,000 to $120,000 / yr • 11/15/2026
CNC Programmer Matthews, NC | Full-Time | On-Site Compensation: $80,000 - $120,000 annually , commensurate with experience. Exceptional candidates with demonstrated expertise may be considered above this range. About the Role: We are seeking an experienced CNC Programmer to develop, validate, and optimize CNC programs for highly complex, tight-tolerance aerospace, defense, and space components. This is a hands-on manufacturing engineering role requiring complete ownership of the programming process, from machining strategy and tooling selection through setup documentation, verification, production support, and continuous improvement. The ideal candidate is more than an experienced Mastercam programmer. They are a manufacturing expert who consistently delivers production-ready programs withRoller Bearing Company Of America, Inc
Hartsville, SC 29550 • (23.5 miles) • Full Time • 11/14/2026
Job Summary The Turn/Grind Set Up Operator: CNC Operator is responsible for setting up and operating CNC turning and grinding machines to manufacture precision metal components. This role requires expertise in machining operations, equipment setup, and quality control to ensure parts meet exact specifications. The operator will work independently and collaboratively to maintain production efficiency and uphold safety and quality standards. Essential Duties and Responsibilities include the following. Other duties may be assigned. Set up and operate CNC turning and grinding machines to cut, shape, and form metal workpieces to precise specifications. Read and interpret blueprints, process sheets, and job orders to determine machining requirements, tolerances, and tooling instructions. Mount wGardenCore
Pageland, SC 29728 • (18.7 miles) • Full Time • $27.00 to $30.00 / hr • 11/14/2026
Description: GardenCore is seeking an Industrial Electrician Technician that is responsible for ensuring the proper electrical functioning of plant equipment and machinery and to troubleshoot any electrical/electronic malfunctioning and complete appropriate repairs and maintenance. Responsibilities Maintain and repair all existing electrical equipment in production areas Install power supply wiring and conduit for newly installed machines and equipment Read blueprints, wiring diagrams, process sheets, experience with PLC’s, and assembly schematic drawings Diagnose and test malfunctioning machinery and discuss malfunctions with other facility personnel Calibrate and adjust all electrical/electronic equipment according to manufacturer’s specifications Requirements: Associate’s degree or TechConMet Plastics
Monroe, NC 28110 • (34.3 miles) • Full Time • $125,000 to $140,000 / yr • 11/14/2026
Your mission Orchestrate an end-to-end supply chain that is reliable, lean, and data-driven across Monroe and its offsite locations-spanning Master Scheduling, Materials Planning, Warehouse Management, Receiving, Sequencing, Shipping, and Inventory Control-while overseeing planning and purchasing for nonproduction materials and services. Where you’ll focus Master scheduling and production control that stabilizes the plan and aligns to customer demand. Materials planning with robust SAP master data and disciplined MRP usage. Warehouse, receiving, sequencing, shipping, and distribution logistics that run efficiently and safely. Nonproduction procurement, including services and indirects. Customer service partnership to meet delivery and information-quality requirements. IT collaboration to sThe Cornerstone Equipment Company
Oakboro, NC 28129 • (37.3 miles) • Full Time • $15.00 to $30.00 / hr • 11/14/2026
Technician, Small Engine Job Description Position Specifics: Reports to: Service Director Supervises: None Purpose : The Small Engine Mechanic services and repairs products that are brought to the store for repair. The Mechanic promotes customer relations and satisfaction by completing jobs on schedule or connecting with customers, in a timely manner, to give them updates on issues such as unattainable replacement parts and warranty issues. The Mechanic may also be responsible for sourcing parts for stock and repairs and assisting in ordering parts. Responsibilities: Repairing and maintaining small engines, large lawn equipment, generators, commercial pressure washing units, mowers, tillers, and other related small handheld equipment with a track record of success. The skills to clearly exPreformed Line Products
Albemarle, NC 28001 • (42.3 miles) • Full Time • 11/12/2026
PRIMARY FUNCTION: Responsible for assisting in the development of manufacturing engineering specifications and special tooling and/or the modification of equipment used in the lean manufacturing process. SPECIFIC DUTIES: In conjunction with other technical staff members, develop value stream strategies of modified or new machines and equipment that will positively impact key business metrics of quality and cost; including the design or procurement and development of fixtures, machinery and/or tooling. Conduct kaizen activities to analyze work force utilization, space requirements, workflow, and design layout of equipment for maximum efficiency of cell manufacturing. Develop and implement lean strategies, which drive teams and projects, identify and eliminate waste, concentrate on set up reMar Mac Industries, Inc.
McBee, SC 29101 • (19.9 miles) • Full Time • $20.59 to $27.17 / hr • 11/11/2026
SUMMARY: Sets up and operates one or more drawing machines to perform all operations required to draw a variety of wire sizes and specifications. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sets up and operates wire drawing machines to draw appropriate finished wire sizes as specified on work orders. Loads work with forklift and threads according to established procedures. Selects and installs proper dies for drawing parts and pilots for holding and centering wire. Sets guards as required. Adjusts equipment and changes dies as required to ensure wire meets specifications. Selects appropriate rod from stock. Welds rod together as reTrueNet Communications
Rockingham, NC • (22.9 miles) • Full Time • 11/11/2026
The Quality Control Technician inspects work performed by client employees, internal employees, or client subcontractors. Work is inspected for process and specification compliance against company/client guidelines. (This purpose is meant to be a guide. Duties may vary dependent upon client.) Essential Position Functions: Inspect assigned work locations for compliance with client or company specifications and guidelines. Inspections may include but are not limited to work safety, installation, and troubleshooting compliance. Use appropriate testing equipment based upon client specifications. Assist in preparing and developing inspection instructions and procedures. Develop and create project specific checklists and standards. Record and document inspection results and findings in applicablKelly Services
Lancaster, SC 29720 • (37.4 miles) • Full Time • 11/11/2026
Quality Assurance Auditor Location: Lancaster, SC Shift: Monday – Friday | 1st Shift Salary: $70,000-$95,000/year + Annual Bonus Opportunity We are seeking a Quality Assurance Auditor to develop and maintain an effective internal compliance program to support adherence to applicable regulations and quality standards. This role plans and conducts internal and external audits, manages supplier audit activities and corrective actions, and works with teams across the organization to strengthen compliance and inspection readiness. What You'll Do: Plan, schedule, and conduct internal and external audits to assess compliance with applicable regulations and quality requirements. Audit external suppliers, contract manufacturers, laboratories, and other service providers; maintain the supplier qualiP&C Recruiting And HR
Carolina, SC • (38 miles) • Full Time • $115,000 to $120,000 / yr • 11/10/2026
Project Controls Engineer Job Description Reporting to, the Projects Construction Manager. The Project Controls Engineer (PCE) is responsible for performing a variety of tasks including scheduling, planning, estimating, and cost control tasks that include analysis and reporting. The PCE is also responsible for developing and updating a master schedule and verifying contractor’s monthly schedules and reviewing baseline schedules utilizing Microsoft Project and other scheduling software. Key Tasks: · Ability to develop and maintain a master schedule with interrelationships between projects. · Must be competent in the development and analysis of detailed project schedules. · Must be experienced in developing and using performance trackers for analyzing manpower, equipment, and construction prGallman Consulting
Elgin, SC • (36.8 miles) • Full Time • 11/10/2026
This job is posted on behalf of Gallman Consulting by Top Echelon. About our Client: Our client is a rapidly growing specialty chemical manufacturer whose products support advanced coatings, adhesives, electronics, telecommunications, and other high-growth industrial markets. The organization is investing heavily in new product introductions, manufacturing capacity expansion, and long-term technical leadership. Today, the facility manufactures more than twenty commercial products, with numerous additional product introductions and technology transfer projects planned over the coming years. To support future demand, the organization is currently investing in expanded infrastructure, including additional warehousing capacity, administrative facilities, and future production assets. EngineeriNutramax Laboratories
Lancaster, SC 29720 • (37.4 miles) • Full Time • 11/10/2026
Description: The Setup Technician I will report to the Packaging Supervisor. The Setup Technician I will act upon specific written and/or verbal instructions furnished by the Packaging Supervisor to set-up plant equipment correctly for operation and effectively use time to meet company goals. Roles and Responsibilities: Set-up/operate pharmaceutical- processing/packaging equipment in conformance with current Good Manufacturing Practices (cGMP), clean rooms and equipment according to standard procedures and perform varied preventive maintenance duties. Performing set-up and adjustments to manufacturing/packaging equipment to ensure assigned machines run at peak efficiency and operations are within the cGMP guidelines and Standard Operating Procedures (SOPs).. Set-up/operate miscellaneous rePro-Tops
Monroe, NC 28110 • (34.3 miles) • Full Time • $17.00 to $21.00 / hr • 11/9/2026
Benefits: 401(k) matching Dental insurance Employee discounts Free uniforms Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Job Summary: We are seeking a skilled and reliable Bilingual CNC Stone Cutter for our 2nd shift (2:00 PM – 10:00 PM) to join our fabrication team. This role involves operating CNC machines to cut, shape, and finish granite, marble, quartz, and other natural or engineered stone surfaces. The ideal candidate should have experience with CNC machinery and be able to communicate effectively in both English and Spanish to support a diverse workforce. What You’ll Do Set up and operate CNC stone cutting machines according to design specifications and work orders. Load and secure stone slabs for cutting. Read and interpret bluSuperior Machine Co Of SC
Florence, SC 29501 • (39.3 miles) • Full Time • $25.00 to $32.00 / hr • 11/9/2026
We are seeking a highly skilled and motivated Industrial Electrician to join our team. As an Industrial Electrician, you will be responsible for installing, repairing, and maintaining electrical systems in our industrial facilities. This is a fantastic opportunity for an individual who is looking for a challenging and rewarding role in the electrical industry. If you have a passion for working with electrical systems and a commitment to ensuring their safe and efficient operation, then we want to hear from you ESSENTIAL DUTIES AND RESPONSIBILITIES : Install, repair, and maintain electrical systems equipment, and components in accordance with local and national codes and regulations. Diagnoses and troubleshoot complex electrical problems to include welding equipment and making repairs. PerfDCS Lab
Matthews, NC 28105 • (44.7 miles) • Full Time • $70,000 to $90,000 / yr • 11/9/2026
CAD/CAM Designer – Fixed Restorations (3Shape) Location: Charlotte, NC (On-site) Employment Type: Full-Time (40 hours/week) About the Role A well-established full-service dental laboratory in Charlotte, NC is seeking an experienced CAD/CAM Designer – Fixed Technician with strong expertise in 3Shape to support high-quality fixed restorative workflows. This is an excellent opportunity for a skilled digital technician who enjoys hands-on involvement, teamwork, and working in a fast-paced production environment. Key Responsibilities Design crowns and custom abutments using 3Shape , including split-file workflows Perform Encode decoding and work confidently with scan bodies Support implant restorative cases from design through production readiness Pre-finish and work with green-state zirconia aEliassen Group
Florence, SC • (41.8 miles) • Full Time • 11/9/2026
Description: On-site in Florence, SC Our client seeks an Electrical-Mechanical Designer to create models and detailed drawings for elevator system hardware using Creo and Pro Cable. The role will support engineers and internal stakeholders through 3D studies, prototyping, and change processes while driving robustness, cost reduction, and issue resolution. The designer will collaborate cross functionally to translate engineering markups into accurate models and documentation. The position requires proficiency with cable routing and wiring diagram tools alongside parametric design practices. Due to client requirements, applicants must be willing and able to work on a w2 basis. For our w2 consultants, we offer a great benefits package that includes Medical, Dental, and Vision benefits, 401k wUnited Protective Technologies, Llc.
Locust, NC 28097 • (42.8 miles) • Full Time • $17.00 to $22.00 / hr • 11/7/2026
Production Technician Description: A Production Technician at UPT works in a warehouse/industrial environment and uses their hands to wire, de-wire, fixture, de-fixture and handle metal parts. Our Production Technicians also clean/prep small metal parts and larger molds, as well as cross train to operate coating room machines/equipment. Duties/Responsibilities: Production Technicians work in a warehouse/industrial environment Production Technicians use their hands to wire (fixture), de-wire (de-fixture), inspect, clean, and pack customer parts (metal parts, such as injection molds, gun slides, gears, pinions, knife blades, etc.) After training, Production Technicians will perform job duties independently, with little supervision Production Technicians must keep their work environment cleanAMBAC International
Elgin, SC 20945 • (36.8 miles) • Full Time • $17.00 to $23.00 / hr • 11/7/2026
We're Hiring: Entry-Level Remanufacturing Technician Location: Elgin, SC | Schedule: 4-day week | First Shift Do you like working with your hands, taking things apart, and figuring out how mechanical systems work? AMBAC International is hiring an Entry-Level Fuel Injection Remanufacturing Technician to join our employee-owned team in Elgin, SC. You’ll learn how to disassemble, clean, reassemble, and test fuel injection systems that power heavy-duty diesel engines in trucks, tractors, defense vehicles, and more. No prior experience? That’s okay-we’ll teach you everything you need to know in a team setting that values consistency, accountability, and hands-on learning. Why Join AMBAC? Employee-owned, and Open Book Managed Multi-year winner of Best Places to Work in South Carolina 4-day workwIndustrial Battery & Charger, Inc
Camden, SC • (44.7 miles) • Full Time • $20.00 to $25.00 / hr • 11/7/2026
As a Service Technician you will provide critical support through equipment maintenance, installation, troubleshooting, and repairs. You will work both independently and collaboratively within a team to ensure optimal device functionality and customer satisfaction during standard business hours. Responsibilities Perform maintenance and repair Troubleshoot technical issues and implement solutions Install new equipment according to specifications Provide prompt and professional customer support Ensure compliance with safety standards and protocols Preferred Qualifications 1+ years' experience in equipment maintenance High school diploma or equivalent Strong mechanical aptitude Customer service skills Effective problem-solving abilities Experience with technical documentation Knowledge of safWARN INDUSTRIES INC
Lancaster, SC 29720 • (37.4 miles) • Full Time • 11/6/2026
Warn believes that every team member plays a significant contribution role in our success. We enable our customers with the tools they need to work and play outdoors. This position description is designed to outline the primary duties of the role, qualifications, and job scope. Just as we do not want our customers to be limited in the outdoor space, we do not want to limit our employees nor the organization to just the work that is identified. It is our expectation that each team member will serve their customers wherever, whenever necessary to ensure the success of our endeavors Position Summary: Working independently and collaboratively with others, this position plays an integral role in executing our mission, philosophy, and commitment to providing high quality products and exceptionalThe Q Works Group
Pageland, SC 29728 • (18.7 miles) • Full Time • $90,000 to $100,000 / yr • 11/3/2026
Ready to change the future, your way? The Plant Maintenance / Continuous Improvement Engineer is responsible for driving operational excellence through Lean manufacturing, Total Productive Maintenance (TPM), and structured problem-solving methodologies. This role ensures optimal equipment reliability, production efficiency, and continuous improvement across manufacturing operations. Your challenge Analyse manufacturing processes and equipment performance using Lean tools, root cause analysis, and data analytics to identify inefficiencies and improvement opportunities, focusing on Single-Minute exchange od Dies (SMED), AM/PM implementation...etc Lead and facilitate continuous improvement initiatives (Kaizen events, value stream mapping, robots / machine integrations and daily management actSystem One
Hartsville, SC 29550 • (23.5 miles) • Full Time • 11/3/2026
Job Title: Nuclear Field Engineer (Mechanical/Structural) Location: Hartsville, South Carolina Type: Contract (12-months) Contractor Work Model: Onsite Per diem $140/day System One is seeking an experienced Field Engineer with a mechanical and structural background to provide on-site engineering and construction support for an active project at Robinson Nuclear Plant. This role will work closely with engineering, construction, maintenance, and outage teams to ensure safe, compliant, and efficient execution of mechanical and structural scopes in a nuclear environment. The ideal candidate brings hands-on field experience, strong technical judgment, and familiarity with nuclear plant processes, procedures, and safety culture. Responsibilities Provide field engineering support for mechanical aService Thread
Laurinburg, NC 28352 • (35.6 miles) • Full Time • $24.00 / hr • 11/3/2026
Service Thread develops great people who develop great products. We’re proud to hire talented people with passions and aspirations beyond the workday. We help everyone on our team feel fulfilled. We are seeking employees who share our core values which are Focus, Drive, Innovation, Integrity, and Exceeding Customer Expectations. All Applicants must pass a criminal background check and drug screen. Competitive pay and excellent benefits including medical, dental, vision, 401K, performance incentives, short term disability, and life insurance offered for full time employees. Job Summary The Manufacturing Lead serves as a bridge between the Production Supervisor and Set-Up Operators, ensuring smooth daily operations. This role supports production schedules, assists with setups and troubleshooCarvana
Monroe, NC • (33.2 miles) • Full Time • 11/3/2026
We're hiring for entry-level automotive roles at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. In these entry-level roles, you'll have several positions to choose from: Detailer: detailing vehicles, including washing, interior cleaning, and exterior buffing Lot Attendant: move vehicles from one department to the next in our Inspection Centers Photobooth Associate: take photos of our vehicles so customers can see our vehicles in our spinners Inspection Associate: inspect the interior and exterior of the vehicles and accurately identify any imperfections/defects Pay: Starting pay for this position is $17.00/hr. Schedule: Please keep in mind that all locations are subject to mandatory overtime based on busCinterra
Laurel Hill, NC • (30.7 miles) • Full Time • 11/2/2026
Description: Survey Instrument Technician We are seeking a detail-oriented and skilled Survey Instrument Technician to join our team. This role is essential in supporting our surveying projects by ensuring the proper calibration, maintenance, and operation of survey instruments. If you have a passion for precision and technical expertise, we invite you to contribute to our dynamic team. Key Responsibilities: - Calibrate, maintain, and repair survey instruments such as total stations, GPS equipment, levels, and theodolites - Assist surveyors in setting up and operating survey instruments in the field - Ensure all equipment is functioning correctly and complies with safety and quality standards - Record and document calibration and maintenance activities - Support data collection efforts byAmplified Electronic Design
Florence, SC • (41.8 miles) • Full Time • $18.00 to $35.00 / hr • 11/1/2026
As a technician, you will install, maintain, and troubleshoot life safety low-voltage systems, including wander prevention, nurse call, access control, locking systems, and CCTV. This position requires weekly overnight out-of-town travel, but generally home on weekends. Skills Relay logic 2 years experience, 2 year degree, or 4 year degree (Electronics, Computers or Engineering) Computer Knowledge Wireless networking Cable pulling Structure modifications using power and hand tools Follow all Safety policies and procedures Safely work in high-traffic areas Leadership skills a plus. Job Responsibilities: Install and repair low-voltage equipment in facilities located in several different states Safely operate and maintain a work vehicle Maintain accurate documentation including work orders, tKatalyst Healthcares & Life Sciences
Florence, SC 29501 • (39.3 miles) • Full Time • 10/31/2026
Responsibilities: Lead the design, development, and deployment of advanced automation and controls systems for manufacturing operations. Serve as the subject matter expert for PLC architecture, HMI development, motion control, robotics, industrial networks, and machine safety systems. Develop automation strategies supporting factory modernization, capacity expansion, productivity improvement, and operational excellence objectives. Lead automation capital projects from concept development, technical specification, and business case approval through commissioning and production stabilization. Perform controls architecture design, hardware specification, programming standards development, system validation, and lifecycle support planning. Manage industrial robot integration, robot programmingCrawl Space Ninja
Matthews, NC 28104 • (41.7 miles) • Full Time • $28 to $32 / yr • 10/31/2026
Experienced Foreman (Waterproofing/Structural Repair) Job Description Full-Time Foreman $28–$32/hr Starting Pay Career Growth Opportunities We are a local construction company with over 20 years in the Waterproofing and Foundation Repair industry. As our company continues to grow rapidly, we are seeking motivated individuals looking for long-term, full-time employment. Starting Pay: $28.00–$32.00 per hour depending on experience. Higher earning potential with specialized skills. Qualifications for an ideal candidate: Must be able to operate construction hand tools and other specialized equipment safely, efficiently, and effectively Excellent communication skills Ability to adapt to a flexible work schedule and work in various types of weather Must have a strong work ethic and a positive atFSS Parent LLC
Matthews, NC 28105 • (44.7 miles) • Full Time • 10/31/2026
Program, and commission BAS systems (e.g., Distech, Honeywell, and potentially Johnson FX Controls. We service some Siemens, Schneider Electric, Trane Controls, but will usually remove and replace with Distech or Honeywell). Troubleshoot complex control issues in HVAC, lighting, and integration systems using diagnostic tools and software. Perform system upgrades and software updates, ensuring compatibility and minimal downtime. Configure and calibrate field devices such as sensors, actuators, controllers, and I/O modules. Read and interpret engineering drawings, sequences of operations, and control schematics. Collaborate with engineers, project managers, electricians, and mechanical contractors to execute projects on time and within budget. Maintain accurate documentation of system architHouse Doctors Of Rock Hill And Monroe
Waxhaw, NC 28173 • (39.1 miles) • Full Time • $25.00 to $35.00 / hr • 10/30/2026
Benefits: Bonus based on performance Company car Competitive salary Free uniforms Opportunity for advancement Training & development Tuition assistance Are you ready to join an award-winning team that provides excellent customer service and value? WHO ARE YOU? You are an energetic, well-organized, creative problem solver and goal-oriented team player who loves a challenging and fun environment. You are looking to work hard, earn great money and gain hands-on business experience. You are excited to join a team that strives to leave every customer an enthusiastic advocate of our company. You are committed to reaching your full potential in a supportive learning environment. WHAT WE OFFER? Competitive pay and bonus structure based on specific metrics paid monthly, quarterly Growth and advancePrecision Plumbing
Matthews, NC • (44.7 miles) • Full Time • 10/30/2026
Prefabrication Technician About Precision Plumbing At Precision Plumbing, you are more than just an employee, you are a valued member of a team that is committed to excellence, growth, and supporting one another. We believe in investing in our people by providing opportunities for career and professional development, and hands-on training. As an operating company of Comfort Systems USA, employees have access to industry-leading training and professional development opportunities designed to help them build their skills, advance their careers, and reach their full potential. We also offer an accredited Apprenticeship Program through NCCER to provide a pathway for individuals to develop their trade expertise while earning a paycheck. and collaborating with experienced professionals. WhetherOceanaGold
Kershaw, SC 29067 • (28.8 miles) • Full Time • 10/30/2026
Company Description OceanaGold is a global intermediate gold and copper producer with more than 35 years of exploration, development and operating experience. We have four operating mines – Haile in the USA, Macraes and Waihi in New Zealand, and Didipio in the Philippines and a global workforce of ~5,400 employees and contractors. Our people, assets, and strategy are core to our success. Guided by our values-Care, Respect, Integrity, Performance, and Teamwork-we strive to be a trusted company people want to work for, partner with, supply and invest in, to create value. We are committed to safe and responsible mining that generates strong returns and contributes to sustainable development in the regions where we operate. OceanaGold is listed on the Toronto and New York Stock Exchanges (TSX:Southeastern Tool & Die
Rockingham, NC 28379 • (21.6 miles) • Full Time • $17.00 to $23.00 / hr • 10/29/2026
About Us Locally owned and operated since 1984, we’re a full-service metal fabrication shop proud to stand behind “Manufactured in America.” When you join our team, you’re joining a family that values hard work, takes pride in craftsmanship, and truly cares about its people. What We Offer · Top-tier, low-cost benefits including health, dental, vision, company-paid life insurance, and long-term disability, plus other voluntary packages · 401(k) retirement plan · Paid time off and 7 paid holidays per year · Monday through Thursday schedule - enjoy those 3-day weekends! · Opportunities for growth and skill development · Hands-on experience with state-of-the-art fabrication equipment · Pride in working for a locally owned, American-made company · A workplace that values safety, quality, and teDP Professionals
Rockingham, NC 28379 • (21.6 miles) • Full Time • 10/28/2026
DPP is seeking a Controls Technician for a direct hire opportunity with our client in Rockingham, NC. Work location : Onsite in Rockingham, NC About the Company The company is a well established, employee owned engineering and automation consulting firm with decades of experience delivering complex industrial solutions. As a 100% employee owned ESOP organization, the company emphasizes long term partnership, technical excellence, and continued investment in its people through professional development and comprehensive benefits. Responsibilities: Programming and Design: Troubleshooting PLC logic, HMI/SCADA interfaces, and reading loop or panel diagrams. Field Support: Performing start-up, calibration, and hardware checks at diverse industrial sites. Focus on PLC/SCADA programming, system trZobility
Monroe, NC 28110-7390 • (33.2 miles) • Full Time • 10/28/2026
Job Description: The Client Aerospace Additive Design and Manufacturing (ADAM) team is seeking a Quality Control Technician for its Monroe, NC facility. In this hands-on inspection role, you will perform visual, mechanical, and coordinate measuring machine (CMM) inspections to verify product conformity to engineering drawings, specifications, customer requirements, and controlled procedures. Will execute dimensional inspections, maintain inspection equipment and calibration records, perform preventive maintenance, and ensure accurate, traceable digital inspection data within applicable MES and QMS systems, directly supporting production readiness, quality compliance, and SPQDC (Safety, People, Quality, Delivery, Cost) performance. Demonstrated CMM operating experience, strong attention toNesco Resource, LLC
Indian Trail, NC 28079 • (39.6 miles) • Full Time • $27.00 to $30.00 / hr • 10/28/2026
CANDIDATE REQUIREMENTS Knowledge Skills & Abilities Possess ability to learn Quality Management System, Document retention system and software Possess working knowledge of inspection tools and standard equipment applicable to the site operations Previous experience in a manufacturing assembly environment, with additional preference to pump manufacturing history[GD3] Ability to read and interpret documents such as department work instructions, blue prints, process code documents, computer software manuals, safety rules, employee handbook and procedure manuals Display ability to write routine reports and correspondence Requires establishing relationships and developed communication skills with internal and/or external contacts and organizations Ability to support production needs and identifOn-Board Companies
Maxton, NC 28364 • (42.6 miles) • Full Time • $18.00 / hr • 10/28/2026
On-Board Services is hiring a General Operator in Maxton, NC ! For immediate consideration please send your resume to Subject Line: Position Title and State you are Located . About Us: On-Board Services, Incorporated is an on-site contract service provider for a local manufacturing entity providing full time positions to our employees. We offer benefits as well as 401k. Position Details: Position Type: Contract Job Location: Maxton, NC Compensation: $18.00/hr **Variable Shifts** Overview/Summary: ESSENTIAL DUTIES AND RESPONSIBILITIES The General Operator role has a seasonality effect. The type of work assigned will vary based on the current season. In spring and summer, you will be assigned to teams supporting a variety of responsibilities. You could spend time inspecting and maintaining oFerretti Search
Matthews, NC 28105 • (44.7 miles) • Full Time • 10/28/2026
The Quality Assurance Analyst will be responsible for ensuring the quality and reliability of the organization’s products, services, or systems by developing and executing test plans, identifying issues, and recommending improvements. This role will collaborate with development, operations, and other cross-functional teams to ensure that standards and requirements are consistently met and that deliverables meet business and customer expectations. Responsibilities: Design and develop robust test suites leveraging object-oriented methodologies. Implement and execute comprehensive test strategies across various platforms and programming languages to enhance overall software quality and test code coverage. Possess mastery of both functional testing and automation techniques. Design and developCavco Manufacturing LLC
Hamlet, NC 28345 • (25 miles) • Full Time • 10/28/2026
ABOUT THE ROLE The Production Team Lead supervises the daily operations in the absence of a manager. They create the shift schedule, assign duties to staff, and readily help out at any work station during their shift. ESSENTIAL DUTIES & RESPONSIBILITIES Assists supervisor in coordinating activities of workers engaged in product assembly, applying knowledge of assembly techniques, specifications, and production scheduling. Discusses with supervisor and checks production schedules, specifications, and priorities to plan departmental work assignments. Designates duties of assembly workers and leads department activities. Revises work assignments as required by priorities and work availability. Explains and demonstrates assembly line procedures and techniques to workers. Interprets specificatiOpenwork, LLC
Norwood, NC • (34.7 miles) • Full Time • 10/28/2026
Openwork is currently assisting a local partner in hiring a dependable and skilled CNC Machine Operator to join their team on 2nd shift. This is a great opportunity for individuals looking to grow their manufacturing career with a reputable company. Job Title: CNC Machine Operator – 2nd Shift Location: Albemarle, North Carolina Pay Rate: $18.00/hour Shift: 2nd Shift | 3:00 PM – 11:30 PM Training: Must be available to train on 1st Shift | 7:00 AM – 3:30 PM for the first few weeks Key Responsibilities: Set up and operate CNC machinery according to specifications Load raw materials and ensure machines are running efficiently Interpret blueprints and technical drawings to produce high-precision parts Perform quality checks using measuring tools (calipers, micrometers, etc.) Troubleshoot and coDAVIS & FLOYD INC
Florence, SC 29506 • (43.8 miles) • Full Time • 10/28/2026
Description: Davis & Floyd is seeking a Water Resources Designer III to join our Greenville or Florence, SC team! The Water Resources Designer III is responsible for supporting engineering staff in the design development of complex civil projects and serving as an advanced technical resource within the CAD team. Working under the general direction of engineers, project managers, and discipline leads, this candidate will independently develop project drawings and construction documents, assist in evaluating project feasibility, coordinate CAD production efforts, and generate accurate and detailed engineering records. The CAD Technician III is expected to exercise considerable independent judgment, perform advanced drafting and design support functions, and assist with mentoring junior technPaceline Inc
Matthews, NC 28105 • (44.7 miles) • Full Time • 10/28/2026
The Manufacturing Engineer owns the production machinery in the Paceline PVA department. You will run, maintain and improve the equipment that keeps production on schedule, and set the standards others work to. This is a hands-on engineering role with technical leadership responsibility. You will write the work instructions and maintenance plans, lead troubleshooting efforts, and drive continuous improvement across department operations. Key responsibilities Equipment operation and ownership Serve as the technical owner of all Paceline PVA production machinery, ensuring safe, reliable and efficient operation. Set up, run and adjust equipment to meet production schedules, quality specifications and throughput targets. Act as the escalation point for operators and technicians on equipment isFox Valley Metrology
Monroe, NC • (33.2 miles) • Full Time • $27.00 to $33.00 / hr • 10/26/2026
Electronics Calibration Technician Candidates must possess bona fide residency and file state taxes in a state where we operate lab sites (WI, MN, MO, IL, OK, NC, OH, TN, ID). We cannot sponsor payroll or establish a tax nexus in other states at this time. Fox Valley Metrology, a leader in ISO/IEC 17025 accredited calibration, serves diverse industries such as Defense, Aerospace, Medical, Semiconductor, and Fortune 500 manufacturers. At Fox Valley Metrology, we recognize that our employees are our greatest assets. We are seeking a skilled Electronics Calibration Technician to join our team. This position is a traveling role, servicing our customers at their facilities. Our culture values teamwork, quality, innovation, dynamic engagement, and opportunities for growth. We'd love to hear fromThe Cole Family Of Harley-Davidson Dealerships
Florence, SC • (41.8 miles) • Full Time • 10/25/2026
Service Technician Location: Harley-Davidson – Florence, SC Come to Sunny South Carolina and make more money! We have great wages, low cost of living and a riding season that is 12 months long, so no more slow winters and layoffs. It's the real America, land of shotguns, BBQ and pick up trucks. We are a big brand new store right on the busiest interstate on the East coast, right on the exit to Myrtle Beach. We have grown by leaps and bounds with no signs of stopping, so come to the winning team. We are a high performing team that believes that quality work is how you build our reputation and have lasting customer relationships. We do a ton of performance work and have a dyno that can even do trikes. We are not trying to hire for a short time, but hire and train for a lifetime. Join our teaPrimo Brands
McBee, SC 29101 • (19.9 miles) • Full Time • 11/20/2026
Overview Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets Salary Range: $92,338-$98,992 Shift: Monday-Friday Night Shift Bonus Eligible: Yes Location: McBee, SC Health Benefits: Medical, prescription, dental, vision, flexible spending account (FSA), dependent care flexible spending account (FSA), health savings account (HSA) Retirement/Investing: 401K with a 5% match, Employee Stock Purchase Plan (ESPP) Insurance: Employee Life Insurance, short and long-term disability, critical illness, hospital indemnity, accident insurance, spouse/domesticSOUTHERN PRODUCTS & SILICA COMPANY
Hoffman, NC 28347 • (36.4 miles) • Full Time • $55,000 to $65,000 / yr • 11/17/2026
A Production Manager is responsible for ensuring that manufacturing processes run efficiently, safely, and on schedule. Tasked to coordinate people, equipment, materials, and workflows to meet production goals while maintaining quality. A Production Manager plays a central role in ensuring efficient, safe, and high-quality manufacturing operations across diverse industries. Key Duties and Responsibilities Oversee daily production operations and output targets. Schedule production staff and ensure proper shift coverage. Maintain and enforce quality and safety standards. Lead and develop production teams, including supervisors and hourly staff. Coordinate with supply chain, engineering, and quality departments. Identify and implement process improvements to increase throughput and reduce wasHunter Recruitment Advisors
Elgin, SC • (36.8 miles) • Full Time • 11/16/2026
Manufacturing Supervisor, 4-day week, 2nd Shift Location: Elgin, SC | Schedule: 4 days; M-Th (Second Shift) 4 pm-2 am. Do you enjoy working with people, solving problems, and making things better every day? AMBAC International is hiring a Manufacturing Supervisor to lead our CNC machining, grinding, and honing operations. This is a hands-on leadership role focused on building team strength, ensuring consistent quality, and supporting efficient, organized production. We’re looking for someone steady, team-focused, and committed to supporting people and processes with care and accountability. Why Join AMBAC? Employee-owned, and Open Book Managed Multi-year winner of Best Places to Work in South Carolina 4-day workweek structure (with weekend shift option) Profit-sharing and ESOP participatioEnhance Recruiting
Rockingham, NC 28379 • (21.6 miles) • Full Time • 11/16/2026
SUMMARY We are seeking an accomplished Plant Manager to lead all operations within a tissue and paper manufacturing facility in the Rockingham, North Carolina area. This highly visible leadership role is responsible for safety, quality, production, reliability, financial performance, and talent development. The ideal candidate brings deep papermaking expertise, proven leadership of paper machines, and a track record of improving underperforming operations through disciplined execution, data-driven problem-solving, and strong team development. RESPONSIBILITIES Lead all plant operations to achieve safety, quality, production, and financial objectives. Drive a strong safety culture through visible leadership, clear expectations, and accountability at every level of the organization. Improve eSignode
Latta, SC 29565 • (41.7 miles) • Full Time • 11/10/2026
Company Description With over $2B in revenue, 80+ manufacturing facilities across 6 continents and over 9,000 employees worldwide, Signode is a leading manufacturer of a broad spectrum of transit packaging consumables, tools, software, and equipment that optimize end-of-line packaging operations and protect products in transit. Signode brings this extensive product portfolio together under hundreds of trusted brands to offer complete transit packaging solutions to its customers. We produce strap, stretch and protective packaging. We also manufacture packaging tools and equipment used to apply the bulk packaging materials. These commercial packaging products are used to pack, bundle, unitize, protect, and secure goods during warehousing and transit. Our company is a pioneer in the industriaCarolina Precision Foods
Florence, SC 29501 • (39.3 miles) • Full Time • 11/6/2026
Job Overview We are seeking a dynamic and energetic Production Supervisor to lead our manufacturing operations during the 1st or 2nd shift. In this pivotal role, you will oversee daily production activities, ensure safety and quality standards are met, and drive continuous improvement initiatives. Your leadership will inspire teams to operate efficiently, optimize processes, and uphold the highest standards of manufacturing excellence. If you thrive in a fast-paced environment and are passionate about process improvement and team development, this is your opportunity to make a significant impact! Duties Lead and manage the 1st or 2nd shift production team/department, fostering a culture of safety, quality, and accountability Develop and execute production schedules using ERP systems such aCatapult
Albemarle, NC 28001 • (42.3 miles) • Full Time • $65,000 to $80,000 / yr • 11/1/2026
Manufacturing Supervisor Locations: New London, NC Hours: 12-Hour Day Shift 8am-8pm. (3-2-2 schedule. Wed-Thurs-Fri on one week/Mon-Tues-Sat-Sun on the second week.) Salary range: $65,000 - $80,000 A well-established manufacturing organization is seeking an experienced, hands-on Manufacturing Supervisor to lead production operations in a fast-paced environment. Our company is committed to quality, safety and exceptional customer service. In recent years we have invested heavily in modernized equipment enabling greater efficiency, consistency, and technological capability. The Manufacturing Supervisor will have a strong background in working with automated machinery and computerized equipment. Extrusion experience a strong plus! This role is critical to maintaining safety, quality, and prodMacpower Digital Assets Edge Private Limited
Monroe, NC • (33.2 miles) • Full Time • $110,000 to $165,000 / yr • 10/30/2026
Job Summary: The Senior Live Production Manager for Pork/Meat Processing Plant is responsible for leading all aspects of live poultry production. This includes ensuring optimal animal welfare, achieving production efficiency, and maintaining compliance with both company standards and regulatory requirements. The role requires managing multiple farm operations, collaborating with various departments, and guiding a skilled team to meet production goals. Key Responsibilities: Operational Management: Supervise daily operations of poultry farms, including breeding, feeding, and animal health. Enforce biosecurity protocols and animal welfare standards. Monitor production metrics to ensure optimal efficiency and output. Team Leadership: Lead, train, and develop farm managers and production staff.Rinker Materials
Matthews, NC 28105 • (44.7 miles) • Full Time • 10/26/2026
Why Join Our Team? Joining Rinker means becoming a part of a team that's committed to making a positive impact. When you work with us, you're not just building structures; you're contributing to the growth and development of communities. As Production Supervisor, you will play a crucial role in providing supervision of plant team members in the daily attainment of scheduled production plans for each assigned area (i.e. box culvert, pre-stress, pipe and wet cast). The production supervisor works together with plant manager, sales, engineering, production scheduler and production team members to schedule and produce product to meet specifications and customer expectations. Join our team and enjoy a comprehensive benefits package that includes competitive pay, a 401k match, paid vacation, holCUP Acquisition LLC
Camden, SC 29020 • (41.4 miles) • Full Time • 11/14/2026
Description: Job Description: Reporting to the Extrusion Supervisor the successful candidate will be responsible for performing all tasks involved in the production of Custom Profile’s products. Follow standard work methods and practice safe work habits to ensure production is as efficient and safe as possible. Work with Setup’s and Line Operators within assigned business unit to complete production requirements in a timely manner. Support the company goals of Zero Defects and 100% On-Time Delivery in a cost-efficient manner. Essential Duties and Responsibilities: Successfully prepare extrusion lines and assist in the completion of the line set-ups per company spec’s and standard work instructions within assigned business unit. Inspect parts for surface quality, color, profile appearance aMUSC
Camden, SC • (44.7 miles) • Full Time • 11/1/2026
Job Description Summary The Quality Assurance Technical Specialist serves as a hands-on operational and technical quality leader supporting multiple laboratory locations across the division. This role bridges laboratory operations, regulatory compliance, quality assurance, and technical process improvement to ensure standardized workflows, sustained survey readiness, and high-reliability performance. Entity Medical University Hospital Authority (MUHA) Worker Type Employee Worker Sub-Type Regular Cost Center CC000866 COL - Lab (DMC) Pay Rate Type Hourly Pay Grade Health-26 Scheduled Weekly Hours 40 Work Shift Job Description Job Description Essential Duties and ResponsibilitiesQuality Oversight & Performance ImprovementProvide direct support to local laboratories in the oversight of qualityAction Packaging LLC
Florence, SC 29501 • (39.3 miles) • Full Time • 11/21/2026
Machine Assistant Opus Packaging is a premier packaging company and supplier of corrugated products. Our philosophy and values are the backbone of Opus, but it’s our employees who bring them to life. We know that the most important component of a thriving business is a thriving team. We are currently searching for 1st Shift Machine Assistant for our Jackson, MI location. As a Machine Assistant you can expect to produce corrugated or chip packaging products for our customers in coherence with promoting the corporate vision, mission statement, and core values. Opus Packaging is pleased to provide a competitive medical, vision, dental insurance package along with company paid life insurance for you and your family. We also offer PTO, opportunity for monthly bonus, safety bonus program and safDu-Co Ceramics Company
Monroe, NC 28110 • (34.3 miles) • Full Time • 11/14/2026
Entry level positions available for an established ceramic manufacturer. Du-Co Ceramics Company is family owned and has been in business for over 75 years. Primary Function of the Job: To provide for the efficient operation of all kilns accordance with established procedures. The Kiln Operator B position is an entry level Kiln Operator position and may be filled, as required, from personnel who have demonstrated the following: Ability to prepare daily production records without error. Ability to load saggers/plates/trays using proper procedures. Ability to load/unload all kilns. Ability to perform sidework including go; no-go gauging. Ability to learn to trouble shoot roller kiln controls plus make adjustments in accordance with standard operating procedures. Ability to learn operate rolleXylem I LLC
Hamlet, NC • (23.5 miles) • Full Time • $24.50 / hr • 11/12/2026
The Jarraff Operator operates heavy equipment of various types to remove branches and tree material from electrical lines. ESSENTIAL FUNCTIONS Always follow and help enforce safe practices and rules Assist in preparing equipment and materials for each day’s work at Foreperson’s direction Operate equipment as directed by Foreperson Help maintain and repair equipment and tools used in operations Assist other crew members in all aspects of daily activities and take a leadership role when required Cleans up and disposes of all debris Sets up barriers, warning signs, flags, markers, etc. to protect employees and public Keeps informed on new equipment, specifications, standard practices, operating procedures, and customer and company employee relations policies and practices. Track and report miDarnel's Open Position
Monroe, NC 28110-7395 • (33.2 miles) • Full Time • 11/12/2026
Description: At Darnel Group, we focus on what truly matters-environmental, economic, and social sustainability. The Extrusion Pelletizer/Grinder Operator is responsible for grinding scrap from the extrusion process, monitoring the pelletizing processes while producing a variety of pellets from fluff as per order specification reporting any machinery inconsistencies to the Supervisor, Shift Lead and/or Manager. This role ensures equipment is functioning correctly and complies with safety and quality standards. This position will start out temporary and covert to a Darnel Regular Employee after 90 days and successful onboarding. ESSENTIAL DUTIES & RESPONSIBILITIES: Set up and start up grinders or pelletizers. Load material and make adjustments as needed. Support extrusion operations includiCore Spark Recruiting
Bethune, SC 29009 • (26.4 miles) • Full Time • 11/12/2026
At CoreSpark Recruiting, we help build stronger companies and lasting careers by connecting exceptional people with the core positions that drive long-term success. Our clients are hiring for roles where talent, work ethic, and commitment matter. The right fit is just as important as the experience you bring to the table. If the details below sound interesting to you, APPLY NOW! Great jobs get filled fast. Our team will review your information and contact you to learn more about your career situation and determine if this is the right position to move forward with. If not, we will help you find the right opportunity. Your information is confidential and you will never be charged a fee for our assistance. We're here to help you find more than just your next job- let's make a career move youVeolia
Pinebluff, NC 28373 • (41.7 miles) • Full Time • 11/7/2026
Company Description Veolia in North America is the top-ranked environmental company in the United States for three consecutive years, and the country’s largest private water operator and technology provider as well as hazardous waste and pollution treatment leader. It offers a full spectrum of water, waste, and energy management services, including water and wastewater treatment, commercial and hazardous waste collection and disposal, energy consulting and resource recovery. Veolia helps commercial, industrial, healthcare, higher education and municipality customers throughout North America. Headquartered in Boston, Veolia has more than 10,000 employees working at more than 350 locations across North America. Job Description Position Purpose: The Operator I operates, monitors, and maintainHYTORC MidSouth
Waxhaw, NC 28173 • (39.1 miles) • Full Time • 11/3/2026
Beginning in 1968 HYTORC established itself as the worldwide leader in hydraulic and pneumatic torque wrench manufacturing and has become the most trusted name in the industry. Over our 50-year history, we have focused on engineering new technologies while building a 24/7 service network. Our mission is to make industrial bolting simpler, more precise, and more reliable. Whether we’re helping to cap the Gulf oil leak in the bottom of the ocean or reaching for the sky in erecting the new World Trade Center, we provide a myriad of industries with better bolting solutions. General Duties: Using the service vehicle to expand our presence in the assigned territory, creating and maintaining customer relationships, managing customer tool repairs, and calibration needs, and serving as a technicalMesser LLC
Midland, NC 28107 • (43.6 miles) • Full Time • 11/3/2026
Job Summary: As a Maintenance Operations Tech I, your principal responsibilities will include maintaining, a safe, efficient and reliable operation of a chemical manufacturing process facility in accordance with local, state and federal regulations. Your activities include the execution of preventative and corrective maintenance and reliability of the location. Why Messer? Messer is the world’s largest privately held industrial gases company and what we do matters because it is woven into every part of life, from the medical gases that patients rely on to the essential elements needed to safely and sustainably produce the goods our communities depend on. The true strength of Messer is our people-at every level and in every role. Join us and take pride in the impact you will make by providiCrown Laundry Svc
Bishopville, SC 29010 • (37.4 miles) • Full Time • $13 to $14 / yr • 10/30/2026
People selected for a Production Operator position may be placed in various roles within the production process of our Crown Health Care Laundry plant. There may be needs in either or both production areas – Soil or Clean. Assignments are determined based on hiring needs and production levels in each area. Below is a brief explanation for each of those areas of operation within the plant. Pay rates and scheduled work hours are based on area assigned. The primary purpose of the Production Operator is to rotate through various positions within the plant to facilitate the receiving, sorting, washing, drying, ironing and loading of linens to be delivered to various hospitals and medical facilities. You will learn to operate various production equipment as needed for your daily assignments. EquRS Recruiting Solutions
McBee, SC 29101 • (19.9 miles) • Full Time • $16.00 to $18.00 / hr • 10/28/2026
Recruiting Solutions is seeking Machine Operators* for reputable global manufacturing facility in McBee, SC area. General responsibilities of the * Machine Operators include operating machinery, inspecting products, and loaded in product. Pay starts at $16.00/hr and increases upon hire. Benefits for the Machine Operator: Competitive pay and benefits Health, Dental, Vision, 401k, PTO & Paid Holidays! Pay increased upon hire! Set schedule on either 1st or 2nd shift with no weekends! Potential for growth and advancement with an established company Great working environment General Skills Required for the Machine Operator: Safety –oriented. (Previous safety training is a plus) Ability to lift between 25-50lbs regularly Ability to operate in high speed and fast-paced environment. Able to followWabtec
Maxton, NC 28364 • (42.6 miles) • Full Time • 11/8/2026
Job Description Who will you be working with? Railroad Friction Products Corporationdesigns and manufactures Cobra high-friction and low-friction composition brake shoes, specialty shoes, and disc brake linings for freight, locomotive and transit vehicles. How will you make a difference? As a member of the Railroad Friction Products group/division, you be responsible for weigh out, assemble, and transport materials for each molding cycle. What do we want to know about you? High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively preseSouthern Utilities & Grading, LLC.
Monroe, NC 28110 • (34.3 miles) • Full Time • 11/4/2026
Benefits: 401(k) 401(k) matching Bonus based on performance Company parties Competitive salary Dental insurance Health insurance Opportunity for advancement Paid time off Vision insurance Southern Utilities & Grading is actively seeking an experienced Fine Grading Misc Equipment Operator/Laborer. This position will be under the direction and supervision of a foreman or superintendent and will work with a team of other construction professionals. The job description noted below is not intended to describe, in detail, the multitude of tasks that may be assigned but rather to give the employee a general sense of the responsibilities and expectations of his/her position. Essential Duties & Responsibilities · Willing and able to perform manual labor, including but not limited to shoveling curb,Autumn Care Of Marshville
Marshville, NC 28103 • (24.4 miles) • Full Time • 11/14/2026
Come work for a team that truly appreciates you and rewards you for all the hard work you do! We’ve been recognized by Newsweek and Plant-A Insights Group as one of America’s Most Admired Workplaces for 2026! As an employee recently said, “I feel I have a lot of support. I feel like part of the team.” Advantages: Flexible Pay Options – Choose On-Demand Pay and get paid as soon as tomorrow for work done today or opt for our Weekly Pay schedule! Positive, Family-Like Atmosphere – Work in a fun, supportive environment where teamwork and care go hand-in-hand. Generous PTO & Benefits – Enjoy a comprehensive benefits package designed to support your well-being and work-life balance. Career Growth Opportunities – Take advantage of our Loan and Forgiveness program as well as other educational progMRINetwork Jobs
Monroe, NC 28110 • (34.3 miles) • Full Time • 11/18/2026
Job Description Position Description The duties of Line Assembly – Class I & II provides the final steps for the completion of the total product package before shipment to the customer, ensuring the highest quality and care is taken to exceed customer expectations and satisfaction. This position is a step by step process that moves via conveyor until completion. Each step is essential to the successful completion of the total door package. Care and attention must be taken to ensure that each step is properly performed before moving to the next process. Class I is segmented into individual work stations that require specific process completion as the door moves along the line conveyor. Training will be provided in each step process whenever practical. Upon completion of step training, emploOutlaw Enterprises Inc. KFC & Taco Bell
Pageland, SC 29728 • (18.7 miles) • Full Time • 11/8/2026
At KFC Franchisee, Outlaw Enterprises , we’re looking for people who love serving customers, have experience in the restaurant industry and who want to be a part of the largest restaurant company in the world! If you want to build a great career while providing fast, fun and friendly service to our customers, please apply to be in Food Production at our KFC. It is the perfect place to learn, grow and succeed! We offer the following: Training programs Scholarship opportunities Reward and recognition culture Competitive Pay Flexible schedules- morning & afternoon shifts Free employee meal each shift Eligibility to accrue paid vacation time Eligibility for Health Insurance PERKS! Discounts on cell phones, gym memberships and more The responsibilities of this Team Member will include: PreparatReNuke Services Inc
Hartsville, SC 29550 • (23.5 miles) • Full Time • 11/9/2026
ReNuke Services is seeking a Nuclear Electrical Design Engineer III for our client’s site in Hartsville, SC! DESCRIPTION: Workers at this level solve more complex problems in engineering areas of specialization with limited supervision. Workers are expected to develop advanced skills and the ability to work with even greater independence. They effectively apply fundamental concepts and procedures to work that is progressingly complex and varied. REQUIRED QUALIFICATIONS: 10 years of discipline experience Must have a BSEE Must have electrical (breakers, transformers, electrical busses, batteries, switchgear), ,not I&C/computer, background. Must have prior nuclear design experience and experience/qualification to nuclear standard design process. DNJP23689 – NUCLEAR ELECTRICAL DESIGN ENGINEER