Defiance, OH 43512 • (0.9 miles) • Full Time • 10/18/2026

Job Description General Motors has a need for qualified Mechanical Journeypersons (Millwright) You will work under minimal supervision with a high level of independent judgement and problem solving. You should be flexible enough to take on and tackle multiple job assignments in a shift. Preferred Experience Includes: Experience with planned maintenance systems and predictive technologies Experience with industrial robotics, automation, and conveyance systems Primary Responsibilities: Follow established safety procedures according to OSHA standards and company procedures Maintain, dismantle, repair, and replace mechanical and hydraulic components (e. g. bearings, seals, details, carriers, etc.) on industrial machinery such as shafting, motors, generators, air compressors, engines, pumps, cy

Wayne, OH 43466 • (44.5 miles) • Full Time • 10/18/2026

Position Overview: Green Bay Packaging Inc., Fremont Division is currently seeking a Senior-Level Controls Technician that is responsible for the installation, programming, troubleshooting, maintenance, and optimization of programmable logic controller (PLC) systems and industrial automation equipment. This role supports manufacturing operations by ensuring automated equipment operates safely, efficiently, and reliably. Responsibilities: Troubleshoot and repair PLC-controlled machinery and automated equipment. Program, modify, and maintain PLC and HMI software. Perform preventive and predictive maintenance on electrical and control systems. Diagnose electrical, instrumentation, and communication network issues. Read and interpret electrical schematics, ladder logic diagrams, and technical

Edgerton, OH 43517 • (21.4 miles) • Full Time • $18.00 / hr • 10/24/2026

Machine Operator (Cut to Length/Sheeting Line) Steel service center in Bryan, Ohio seeks an experienced machine operator to run cut to length line. Candidates with at least two years of experience working as a machine operator will be considered. Cut to length/sheeting experience very helpful but not necessary. Any mechanically-inclined manufacturing machine operator will be considered. Responsibilities Set up and operate sheeting line to cut metal coils into sheets of specified length Maintain machinery and run production of such equipment within quality and customer specifications while prioritizing safety Responsible and accountable for proper operation of line, including set-ups, maintenance, adjustments, change-overs. Ability to diagnose quality problems while keeping spoilage and del

Findlay, OH 45840 • (41.6 miles) • Full Time • 10/24/2026

About PaperTech PaperTech is a leading manufacturer of pressed paperboard packaging, providing customized dual-ovenable food trays and other high-quality products to customers in food distribution throughout North America. Our products are made of 90% or greater renewable sustainable materials. PaperTech is committed to environmental stewardship and is well-positioned to benefit from the accelerating shift away from single-use plastics. With accelerating organic growth opportunities, this is an exciting time in the company's history. We would love to have you as part of our team. Shift Information: 2nd shift M-F 4:00 pm - 12:00 am Responsibilities: Other duties may be assigned as needed Responsible for the prompt setup and changeover of production machines. Perform routine checks to verify

Findlay, OH 45839 • (41.1 miles) • Full Time • $67,000 to $70,000 / yr • 10/24/2026

About the Role This position is essential for maintaining and enhancing the operational efficiency of our client's plant. You will be responsible for installing, maintaining, and repairing machinery and equipment, ensuring the smooth operation of the facility. Key Responsibilities Maintain plant equipment and the facility. Install, maintain, and repair machinery, equipment, physical structures, and electrical systems. Assemble, install, and maintain pipe systems and related hydraulic & pneumatic equipment. Repair and replace gauges, valves, pressure regulators, and related equipment. Minimum Requirements Experience in electrical, machine repair, including mechanical power presses, fabrication, hydraulics & pneumatics. Minimum of 4 years of trade or vocational school preferred. Prefer journ

Fort Wayne, IN 46805 • (41.9 miles) • Full Time • $27.14 to $32.57 / hr • 10/23/2026

Keep Fort Wayne's water and wastewater facilities running at peak performance! Join the City of Fort Wayne as an Industrial Maintenance Mechanic II. City of Fort Wayne – Filtration Plant Position: Industrial Maintenance Mechanic II Pay: $26.61 – $31.93 per hour Schedule: 7:00 a.m. – 3:00 p.m., may vary Location: Fort Wayne, IN What You'll Do: Install, maintain, and repair water and wastewater plant equipment, including 100+ remote facilities Perform preventative and predictive maintenance, rebuild tanks, clean filters, and maintain rotating pump assemblies Operate heavy equipment including vac trucks, loaders, forklifts, and backhoes Conduct painting, masonry, carpentry, glazing, welding, and machining tasks Use CMMS to track maintenance, labor, and materials Enter, exit, and work safely i

New Haven, IN 46774 • (35 miles) • Full Time • $60,000 to $85,000 / yr • 10/23/2026

About the Role We’re looking for a mechanically minded Machine Tool Designer who enjoys building things, solving problems, and figuring out how machines work. You’ll design custom automation equipment, tooling, fixtures, and mechanical systems while working closely with mechanical engineers, toolmakers, machinists, fabricators, and assemblers. This is an opportunity to contribute to interesting projects for customers throughout the MidWest and see your designs take shape on the shop floor. About Glaze Tool Glaze Tool & Engineering is a custom machine builder and job shop specializing in automation, tooling, and advanced manufacturing solutions. Our engineers work hands-on across the full project lifecyclefrom concept and design through fabrication, assembly, testing, and installation. Key

Fort Wayne, IN 46825 • (41.1 miles) • Full Time • $30.00 to $35.00 / hr • 10/23/2026

Avalign produces innovative, high-performance, and cost-effective medical devices with a particular focus on high growth and ingenuity. Our team is growing quickly and proud of the fact that our custom-made devices continue to make a huge difference in the lives of medical professionals and their patients. Our employees are actively involved in the design, engineering and manufacture of technologically advanced medical devices that ensure that we meet our customer’s quality specifications for each product we produce. We are seeking a skilled Maintenance Technician to join our medical device manufacturing team, specializing in the maintenance and support of CNC (Computer Numerical Control) equipment such as Mori Seiki Mill Turns, Makino 5 axis Mills, Tsugami Mill Turns, and Citizen Swiss. A

Perrysburg, OH 43551 • (43.3 miles) • Full Time • 10/23/2026

Description: We’re a fast-paced countertop fabrication facility looking for a skilled Industrial Maintenance Technician to keep our equipment running safely and efficiently. This role is critical to minimizing downtime and keeping production on track in a 24/5 operation. If you’re a hands-on problem solver who can diagnose issues quickly and fix them the right waynot just the fast wayyou’ll do well here. Schedule 2nd Shift: Monday–Friday, 2:30 PM – 11:00 PM Overtime may be required based on production needs What You’ll Do Troubleshoot, repair, and maintain fabrication equipment including saws, CNC machines, polishers, routers, compressors, and dust collection systems Perform preventative maintenance to improve reliability and reduce unplanned downtime Diagnose mechanical, electrical, pneum

Maumee, OH 43537 • (39.6 miles) • Full Time • $37.79 / hr • 10/22/2026

Industrial Electrician Location: Toledo, OH Pay: $37.79/hour Schedule: Monday–Friday | 6:00 AM – 2:00 PM Direct Hire Opportunity Join a Leading Manufacturing Team Superior Skilled Trades is partnering with a client to find an experienced Industrial Electrician to support the maintenance, installation, troubleshooting, and repair of electrical systems in a fast-paced manufacturing environment. This is an opportunity for a skilled electrician seeking a stable, long-term union position with competitive pay and outstanding benefits. Responsibilities Install conduit, wiring, lighting, power circuits, and electrical control equipment Install motors, drives, and production equipment using electrical prints and schematics Troubleshoot and repair industrial electrical systems, including: AC/DC moto

Lima, OH 45801 • (40.2 miles) • Full Time • 10/22/2026

Sr. Mechanical Project Manager - Data Center About Us: Highland Consulting Group is a national executive search firm specializing in recruiting top-tier construction talent. With over 75 years industry experience, we pride ourselves on placing the right professionals in the right roles for our clients, ensuring long-term success for both candidates and employers. Position Overview: We are working with a large regional Mechanical Contractor in the Lima, OH area to find an experienced Sr. Mechanical Project Manager with expertise in mechanical piping, plumbing, and HVAC projects. Specifically we are looking for the management of Data Center projects. This position offers the opportunity to work on large, high-profile projects valued over $85 million. If you're motivated by challenging projec

Van Wert, OH 45891 • (31.7 miles) • Full Time • 10/21/2026

Key Responsibilities Printing Line Operations Set up and operate printing line equipment according to production specifications. Monitor equipment performance, adjusting settings to maintain optimal print quality and output. Ensure inks, plates, and substrates are correctly prepared for printing operations. Conduct regular inspections of the printing process to identify and resolve issues promptly. Quality Assurance: Perform quality checks on printed products to ensure compliance with specifications and standards. Adjust color, registration, and other parameters to achieve the desired print quality. Record and report deviations or defects to supervisors and quality control teams. Collaborate with the quality team to implement corrective actions as necessary. Maintenance and Troubleshooting

Fort Wayne, IN • (43.4 miles) • Full Time • $18.00 to $21.00 / hr • 10/21/2026

Benefits U.S.-based employees have access to medical, dental, and vision insurance, a 401(k) plan and company contribution, short-term and long-term disability coverage, basic life insurance, and wellbeing benefits, among others. U.S.-based employees also receive, per calendar year, up to 6 scheduled paid holidays. Additionally, eligible hourly/non-exempt and exempt employees accrue up to 112 hours of PTO based on years of service and may annually take up to 8 hours of paid volunteer time. Additional paid sick leave is also provided if required by state or local law. Summary of Position: The Quality Assurance Technician I is responsible for fact-checking tickets in a queue and testing customer-owned devices to ensure functionality prior to deployment. Essential Functions: Responsible for t

Fort Wayne, IN • (43.4 miles) • Full Time • $40,000 to $80,000 / yr • 10/20/2026

Multi-Craft Industrial Mechanic Corporate Construction Facilities Crew About the Role Are you an all-around master of industrial trades who hates doing the same repetitive assembly line job every single day? Our corporate construction crew is expanding! We are looking for a highly versatile Multi-Craft Industrial Mechanic to support a network of local manufacturing facilities right in our immediate area. In this role, you get the day-to-day variety of supporting different plant setups, expansions, and machinery installs. Because all facilities are 100% local, you get the benefit of being home in your own bed every single night. You will also act as a crucial project multiplier, working side-by-side with external contractors to maximize project efficiency, keep timelines on track, and ensur

Fort Wayne, IN • (43.4 miles) • Full Time • $25.00 to $30.00 / hr • 10/17/2026

CNC Mill Machinist Location: Fort Wayne, Indiana Position Type: Full-Time Position Overview We are seeking a skilled CNC Mill Machinist to join a precision manufacturing team. This individual will be responsible for setting up, operating, and adjusting CNC milling machines to produce high-quality components in accordance with engineering specifications and quality standards. The ideal candidate has hands-on experience with CNC milling equipment, can independently read and interpret blueprints, and understands the importance of maintaining tight tolerances in a precision manufacturing environment. Candidates with experience in medical device, aerospace, automotive, or other high-precision manufacturing environments are encouraged to apply. Key Responsibilities Set up and operate CNC milling

Archbold, OH • (15 miles) • Full Time • 10/16/2026

Job Description The General Production role performs a variety of hands-on tasks in a manufacturing and metal stamping environment. You work near presses, benders, and shears to support production, stack raw and finished products, prepare goods for shipment, and inspect final parts for defects. This position requires reliable attendance, basic math skills, the ability to lift, push, and pull up to 40 pounds, and a strong focus on safety, quality, and productivity in a small-crew setting. Pay: $19 Shift: 3rd Location: Archbold Sounds like you? Apply here! Job Type & Location This is a Contract to Hire position based out of Archbold, OH. Pay and Benefits The pay range for this position is $19.00 - $20.75/hr. Individual compensation offered for this position within this range will depend on m

Perrysburg, OH • (40.6 miles) • Full Time • $16.00 / hr • 10/16/2026

PeopleReady of Toledo, OHis now hiring Assembly Workers in Perrysburg, OH! As an Assembly Worker, you are responsible for assembling and checking product parts, assisting in shipments, and ensuring that manufactured products meet set standards of quality. Apply today and you could start as soon as tomorrow. As a PeopleReady associate you'll benefit from: Next-day pay for many of our open positions The choice of long-term positions for steady work or short-term positions for extra cash The convenience of applying for and accepting jobs right from our mobile app, JobStack! Text “READY” to 81555 to download JobStack and get started today Pay Rate: The pay rate for this job is $16- $16/ hour* What you'll be doing as an Assembly Worker: Assemble components accurately, thoroughly, and quickly on

Adrian, MI 49221 • (44.2 miles) • Full Time • $22.50 / hr • 10/16/2026

Assembly Technician | No Experience Required | $22.50/hour Location: Adrian, Michigan Job Type: Full-Time Available Shifts: First shift: 6:00 AM–3:30 PM Second shift: 3:30 PM–1:00 AM Enjoy building things, working with tools, or figuring out how parts fit together? Put that interest to work. Eastridge Workforce Solutions is hiring Assembly Technicians for a manufacturing company in Adrian. You’ll help build precision mechanical, electrical, and optical assemblies by following detailed instructions and checking your work for quality. No previous manufacturing experience is required. If you enjoy DIY projects, model building, electronics, repairs, or other hands-on hobbies, we’d love to hear from you. What you’ll do: Assemble components using work instructions, drawings, and parts lists. Use

Bowling Green, OH 43402 • (37.3 miles) • Full Time • $80,000 to $108,000 / yr • 10/15/2026

Project Manager Position Summary The Project Manager is responsible for leading the planning, coordination, and execution of complex projects within a manufacturing environment. This role supports the successful introduction of new products, equipment, and processes into production by managing facility modifications, equipment installation, and production readiness activities. The position works cross-functionally with engineering, operations, maintenance, quality, and external contractors to translate project requirements into fully operational manufacturing systems. The Project Manager ensures projects are delivered safely, on time, within scope, and aligned with business and customer expectations, while maintaining compliance with all applicable safety and regulatory standards. Location

Lima, OH 45804 • (43.3 miles) • Full Time • $32.00 to $36.75 / hr • 10/15/2026

Rudolph Foods Company, Inc. Industrial Maintenance Technician Night Shift | 6:00 PM – 6:00 AM | 2-2-3 Schedule At Rudolph Foods Company, we're proud to be the world's largest manufacturer of pork rinds and a leader in the snack food industry. For more than 60 years, we've remained committed to producing high-quality products while staying true to the family values that built our company. We're looking for an experienced Industrial Maintenance Technician who enjoys troubleshooting, solving problems, and keeping equipment running at peak performance. If you're mechanically inclined, thrive in a fast-paced manufacturing environment, and want to be part of a company that values its employees, we'd love to hear from you. Shift Night Shift: 6:00 PM – 6:00 AM Schedule: Rotating 2-2-3 schedule (ev

Butler, IN 46721 • (28 miles) • Full Time • $21.00 to $23.00 / hr • 10/14/2026

Join Our Team at New Process Metal Solutions! New Process Metal Solutions is seeking an experienced Slitter Setup Operator to join our 3rd Shift team. If you have experience setting up and operating slitting equipment, a strong mechanical aptitude, and a commitment to safety and quality, we want to hear from you. Schedule: Sunday – Thursday, 10:00 PM - 6:00 AM, plus overtime as needed Schedules may vary based on customer demands and production requirements. Position Summary The Slitter Setup Operator is responsible for setting up slitting lines to customer specifications, ensuring quality standards are met, minimizing scrap, and supporting efficient production operations. This role requires attention to detail, problem-solving skills, and the ability to work safely in a fast-paced manufact

Auburn, IN 46706 • (35.4 miles) • Full Time • 10/14/2026

Description: The CNC Maintenance Technician is responsible for ensuring the optimal performance and efficiency of Computer Numerical Control (CNC) machinery through a combination of preventive maintenance, troubleshooting, and repair of mechanical, electrical, and hydraulic systems. Requirements: · Preventive Maintenance: Conduct routine inspections and execute preventive maintenance tasks on CNC machines and supporting equipment (e.g., material handling systems, air and coolant lines) to identify and address potential issues before they cause major problems. · Troubleshooting & Repair: Diagnose and resolve complex mechanical, electrical, hydraulic, pneumatic, and software issues in a timely manner to minimize production downtime. · System Knowledge: Troubleshoot and repair a variety of sy

Findlay, OH 45840 • (41.6 miles) • Full Time • 10/14/2026

Benefits: 401(k) 401(k) matching We are a custom cabinet shop seeking a reliable Delivery Driver/General Shop Laborer to join our team. This position requires someone who has a strong work ethic and has the ability to show up on time. Responsibilities would include transporting custom made cabinets, millwork and related materials in a safe and timely manner to residential and commercial job sites in our company trucks and trailers. Also assisting with loading and unloading of the materials with care and professionalism, and helping maintain delivery vehicles and equipment. Assisting with various shop duties including material handling, shop clean up, and supporting the cabinet makers and overall shop operations throughout the production process. Must have a valid driver license, clean driv

Fort Wayne, IN • (43.4 miles) • Full Time • 10/14/2026

This job is posted on behalf of Austin Allen Company, LLC by Top Echelon. Quality Assurance Manager Salary $100,000 – $120,000 + Bonus + Benefits + Paid Relocation to Upper MW Are you a hands-on Quality Assurance leader who thrives in a collaborative manufacturing environment? We're seeking a proactive QA Manager to lead food safety and quality programs for a growing dairy manufacturing operation. This is an excellent opportunity for a science-minded professional who enjoys developing people, improving processes, and making a meaningful impact. As the Quality Assurance Manager, your focus will be to: Lead, coach, and develop the Quality Assurance and laboratory teams. · Oversee food safety, quality systems, laboratory testing, and regulatory compliance. · Evaluate and improve QA programs,

Fort Wayne, IN 46825 • (41.1 miles) • Full Time • $24.00 to $30.00 / hr • 10/13/2026

CAD DESIGNER We are seeking a highly motivated and experienced CAD designer to join our team. The ideal candidate will have: a Technical Certificate or Associate’s Degree in CAD, extensive knowledge of CAD software i.e., Autodesk Inventor/AutoCAD and/or SolidWorks, a strong technical drawing ability, good communication and organizational skills, attention to detail, a good understanding of mathematics, engineering and sheet metal fabrication. Responsibilities: · Create detailed technical drawings, 2D, 3D models and prototypes. · Accurately represent dimensions of materials and other elements using standard G,D&T. · Accurately and effectively manage BOMs and Part Files. · Work with engineering staff to transform product ideas from prototyping to production manufacturing. · Analyze designs f

Fort Wayne, IN • (43.4 miles) • Full Time • $50.00 to $62.00 / hr • 10/13/2026

The Need: The person in this role will be responsible for providing Electrical/Automation Engineering support to the maintenance teams of a large manufacturing company. The intended purpose of this role is to: Provide training to the maintenance wage Electricians Provide troubleshooting support to the maintenance team Identify opportunities for improvement in machine reliability Aid the shop in development of the maintenance systems/practices This role will be on night shift and alternating weekends Employment Type: Long Term Contract (LTC) - Initial 1-Year term with right to extend. This role is a pipeline position for day-shift full-time roles. CTH possible after 6-months, but is not guaranteed. This support is needed starting immediately and currently does not have a defined end date. T

Fort Wayne, IN • (43.4 miles) • Full Time • 10/12/2026

Description Title: Sewing Operator Reports To: Production Supervisor Work Schedule: 1st 7-3:30 pm, 2nd 3:00 pm-11:30 pm M-Fri (OT will be required during peak season) The Automated Long Arm Sewing Machine Operator is responsible for operating and maintaining automated long arm sewing machines used in the manufacturing process. This role involves setting up the machine, monitoring production runs, and ensuring that all products meet quality standards. The operator must have a strong attention to detail and be able to work efficiently to meet production targets while adhering to safety and quality guidelines. Primary Responsibilities: Ensures proper and continuous feed of straightened cushions into automated sewing machines. Monitors the machine during operation to ensure that it is running

Fort Wayne, IN • (43.4 miles) • Full Time • $50,000 to $60,000 / yr • 10/11/2026

Overview Vayan Group is seeking a Quality Supervisor/Project Coordinator to support quality and containment projects at our Fort Wayne, IN location. This role is ideal for someone with strong mechanical aptitude, experience in rework or containment, and a hands-on approach to project coordination. The Project Coordinator will oversee daily operations, ensure quality standards are met, and support site launches and small team activities. *Travel may be requirement for this role* Key Responsibilities Coordinate and oversee quality and containment activities on-site. Support mechanical rework operations and ensure adherence to specifications. Communicate effectively with customers, supervisors, and inspectors to maintain workflow and resolve issues. Ensure project documentation, reports, and

Fort Wayne, IN • (43.4 miles) • Full Time • $16.00 to $23.00 / hr • 10/10/2026

Position Summary: This position is responsible for prep, assembly and test of sensor products. This includes, but is not limited to: Preparation of material to assemble Preparation of paperwork Assembly and manufacturing of finished assemblies per instructions. Testing of in-process and finished assemblies. Packaging of the finished assemblies. Completion of all paperwork. Essential Duties and Responsibilities: Soldering Assembly Potting Wire stripping Terminal insertion Measurement and test Stamping Education, Job Knowledge, Skills and Abilities: Minimum education of a high school diploma or equivalent (Higher education preferred). Experience in electronics assembly. Familiar or trainable in use of measurement equipment (calipers, gages, electronic meters, etc.) Must be able to lift 55lbs

Ottawa, OH 45875 • (24.8 miles) • Full Time • 10/9/2026

As a Maintenance Technician at Steel Technologies, your main responsibility is to continue to improve our safety, quality, and efficiency. How? By performing preventative, routine, and emergency mechanical and/or electrical maintenance and providing effective troubleshooting, you are a huge part in ensuring operations is running effectively at all times. How you’ll contribute to our company: Preventative Maintenance Perform routine maintenance to all plant machinery Carry out the preventative maintenance program for the plant Ability to accept and control maintenance operations and communicate non-compliance problems to supervisor for instruction Identify and address safety concerns throughout the facility Maintain general housekeeping and organization of maintenance department and all equ

Antwerp, OH 45813 • (20.8 miles) • Full Time • 10/9/2026

The Industrial Electrician is responsible for the installation, maintenance, and troubleshooting of industrial equipment to ensure machinery runs safely and efficiently. Operating in a fast-paced manufacturing environment, this role requires expertise in electrical troubleshooting, new machinery installations, and a strong working understanding of PLCs and automated systems. Responsibilities Installation: Set up new manufacturing facilities, machinery, and automation equipment. Perform inspections, adjustments, and repairs on production and facility systems. Install, dismantle, and overhaul heavy machinery. Troubleshooting: Diagnose system failures in motors, generators, relay systems, electronic drives, and Programmable Logic Controllers (PLCs) to prevent production downtime. Analyze elec

Bowling Green, OH 43402 • (37.3 miles) • Full Time • $35.50 to $36.50 / hr • 10/9/2026

JOIN A TEAM THAT CHANGES LIVES Learn more about PBE’s culture and benefits by clicking here. POSITION SUMMARY: At Principle Business Enterprises (PBE), we create products that improve livesfor the people who use them and the caregivers who support them. As we continue to invest in our manufacturing operations, we’re looking for an Industrial Electrician (known internally as an Electrical Tech) to help keep our production environment running safely, reliably, and efficiently. In this role, you’ll be the go-to resource for maintaining, troubleshooting, and repairing the electrical systems and equipment that our manufacturing facility depends on every day. This position is ideal for someone with solid electrical fundamentals who is genuinely curious about how control systems and automation wo

Lima, OH • (40.9 miles) • Full Time • $28.00 to $34.00 / hr • 10/9/2026

Logoplaste is looking for a night shift Maintenance Technician at our Lima, OH location! DUTIES & RESPONSIBILITIES Ensure the safe and efficient operation of all equipment to meet or exceed company established OEE expectations and customer quality expectations Follow Lockout/Tag out Policy Proactive in addressing unsafe conditions on production equipment Process production equipment and maintain documentation to support process changes Proactive in addressing inefficiencies of production equipment COMPENTENCIES & QUALIFICATIONS 3-5 years relevant manufacturing experience in plastics technology or a similar technical area Ability to clearly communicate technical system issues Strong mechanical maintenance experience and strong knowledge hand and power tools Demonstrated understanding of mec

Napoleon, OH 43545 • (13.5 miles) • Full Time • 10/8/2026

Essential Functions Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Job Summary Will provide technical support for CHS line equipment, assisting Customers, Sales, and the Service team with troubleshooting, service coordination, parts support, and maintenance of technical documentation related to CHS equipment. (This is not an IT position.) Duties and Responsibilities: Receive and respond to customer, Sales, and internal requests for technical support related to CHS line equipment, including service and parts inquiries. Provide technical assistance for CHS line equipment, including troubleshooting mechanical and electrical issues and supporting resolution of equipment performance concerns. Assist in coordinating service activi

Waterville, OH 43566 • (33.8 miles) • Full Time • $20.00 to $25.00 / hr • 10/8/2026

Assembler III – Waterville, OH Job Overview We are seeking an experienced Assembler III to join our manufacturing team. This is a skilled, hands-on position for someone with strong mechanical abilities and experience in fabrication, piping, mechanical assembly, welding, and/or electrical wiring . The Assembler III will work independently on manufacturing assignments and may also serve as a trainer or project leader , assisting less experienced team members. This position may also participate in jobsite installations and repairs as part of a field team. Responsibilities Independently complete fabrication, piping, mechanical assembly, and electrical assignments Read and work from mechanical prints, electrical prints, piping prints, drawings, sketches, and layouts Master the safe and effectiv

Fort Wayne, IN • (43.4 miles) • Full Time • $29.00 to $30.00 / hr • 10/8/2026

Industrial Maintenance Technician (CNC & Automation) - 3rd Shift What We Look For Core Skills: Strong electrical and mechanical analytical problem-solving ability. We are seeking a technician who is strong on the electrical side , but we will review candidates who are more mechanical. Experience: Repairing and troubleshooting CNC machines and mechanical presses in a production environment. Systems Knowledge: Familiarity with AC/DC drives, servo motors, PLCs, pneumatics, hydraulics, and industrial control systems. Blueprints: Ability to read and interpret hydraulic, mechanical, and pneumatic blueprints. Education: High school diploma or GED required. Flexibility: Willingness to work the overnight shift and overtime is desired. Note: Specialized production machinery experts only; facilities

Fort Wayne, IN 46803 • (41.1 miles) • Full Time • 10/7/2026

Position: MIG Welder / Fabricator Location: Fort Wayne, IN Schedule: 4x10 Schedule (Monday – Thursday) | First or Second Shift Available Compensation: $19.00/hr Base + Up to $4.50/hr Production Incentives ($21.25 – $23.50/hr Effective Rate) + Early Merit Bumps Job Type: Full-Time / Direct-Hire Position Overview We are looking for hardworking, reliable MIG Welders / Fabricators to join our team in Fort Wayne, IN. This is a direct-hire production role assembling and welding heavy-duty cement mixer drums. If you like hands-on structural work, want to earn extra pay through clear production incentives, and want 3-day weekends every single week , this is the position for you. What You'll Do Assembly & Welding: Fit and weld internal spiral fins/flighting inside large steel cement mixer drums usi

Fort Wayne, IN • (43.4 miles) • Full Time • $90,000 to $130,000 / yr • 10/6/2026

NO TRAVEL Responsibilities: Owns and leads projects with small to medium sized teams for projects. Assists Project Manager in identifying changes in project scope and developing change orders. Demonstrates an understanding of the project scope and schedule. Translates functional requirements to system configuration. Designs control systems’ network architectures and control strategies. Serves as a technical contact for customers. Has a firm competency of one or more control systems platforms or industrial processes. Adapts to new technologies by applying learned concepts and functionality. Day to Day Activities : Interfacing with the clients in design meetings and conference calls Working with the project team leading less experienced engineers and taking direction from the project manager

Fort Wayne, IN • (43.4 miles) • Full Time • 10/5/2026

Why a career as an Industrial Air Compressor Technician with Brehob? Brehob has proudly served the industry for over 70 years with leading products and best in class customer service. Competitive Benefits: Company paid training and internal support Medical, Dental, Vision, and Life benefits PTO, Holiday, and Sick Pay 401k and company matching HSA Contributions by company Technicians have opportunity for DAILY overtime Potential for company provided vehicle and gas card Referral Program up to $1500 for EACH new employee hired Job Responsibilities Conduct routine inspections, trouble shooting, and preventative maintenance on piston and rotary screw air compressors, multi brand compressors (oil flooded and oil free), and refrigerated/desiccant air dryers. Install new equipment when applicable

Auburn, IN • (36.4 miles) • Full Time • 10/4/2026

Job Title: Tooling Technician & Industrial Maintenance Location: Auburn, IN Pay: $28.00 - $30.00 per hour Shifts: 2nd and 3rd Shift Available Join our team as a Tooling Technician or Industrial Maintenance Technician. You'll work closely with tooling personnel to maintain high-quality standards. This role requires precision, safety, and efficiency. In Industrial Maintenance, you'll focus on maintaining, troubleshooting, and repairing PLCs and other automated equipment, involving both electrical and mechanical tasks. Key Responsibilities: Tool Use:Utilize hand tools, wrenches, hammers, tube benders, air tools, and related accessories effectively. Maintenance and Repair:Assist in the repair and maintenance of tooling and equipment, collaborating with other team members as needed. Measurement

Grabill, IN 46741 • (31.4 miles) • Full Time • $18.00 to $22.00 / hr • 10/2/2026

The Flatline Operator is responsible for setting up, operating, and maintaining the Makor finishing machine to apply stains, paints, or topcoats to cabinet components. The operator ensures finished products meet quality standards while maintaining efficient production flow. This role requires technical skill, attention to detail, and adherence to safety and quality standards. Responsibilities Track orders using INNERGY to follow where component is in the production process. Set up and adjust the Makor machine according to job specifications, including conveyor settings, spray parameters, and finishing programs. Load cabinet components onto the machine, ensuring proper alignment and placement. Monitor the machine during operation to maintain consistent finish quality. Make minor adjustments