Fulton, NY • (38.2 miles) • Full Time • 9/22/2026

DescriptionOperations Electrical Engineer – New York OperationsWork Location: Watertown or Fulton, NYReporting to the Sr. Manager of Operations, the Operations Electrical Engineer will plan, organize, and direct engineering activities to update and optimize hydropower facilities throughout New York State.ResponsibilitiesManage the design, specification, cost, construction, and commissioning of capital improvement projects relating to electrical power generation and electrical distribution up to 115KV.Prepare tendering documents, reviews and comments on bid packages to ensure design adequacy, electrical code compliance and constructability.Assist operations and compliance staff to ensure NERC and NPCC regulatory compliance.Provide operations staff with electrical safety training and act as

Penn Yan, NY 14527 • (28 miles) • Full Time • 9/22/2026

Job Summary:Responsible for inspecting and repairing hydraulic systems and components.Essential Duties & Responsibilities• Troubleshoot and diagnose hydraulic and pump systems and the ability to repair them.• Identify parts needed for all repairs.• Additional experience troubleshooting hydraulic hoses, fittings, cylinders, valves and pump equipment are a plus but not required.• Completes the proper repair paperwork for ordering parts.• Observe all safety procedures and policies and use proper protective equipment (especially eye, ear protection and steel toe shoes/boots, gloves, etc.)• Keep work area clean and organized.• Report all injuries, near misses and accidents immediately to a supervisor.• All other duties as assigned.Education, Skills, and Experience• Ability to read and interpret

West Henrietta, NY 14586 • (29.9 miles) • Full Time • 9/22/2026

This position leads the company’s Quality Assurance function and is responsible for product quality and inspection, maintaining the companies ISO system, managing the QA department, and all customer related quality documents and responses.As a companywide resource for quality initiatives, the Quality Assurance Manager works across departments to establish and maintain consistent quality standards, promote a culture of continuous improvement, and ensure customer requirements are understood and met. Key Responsibilities· Lead and supervise the Quality Assurance department· Maintain and continuously improve the company’s Quality Assurance program· Ensure consistent application of QA standards and procedures throughout the organization.· Serve as a companywide resource for quality-related init

Rochester, NY 14606 • (31.2 miles) • Full Time • 9/22/2026

Summary/Objective:The Platemaker is responsible for ensuring the optimal profitability and quality of print operations by creating plates for press production with precision and efficiency. This role requires attention to detail and technical expertise in preparing and maintaining printing plates to meet production schedules and quality standards.Essential Functions:Review and understand press requirements, including plate grippers, sheet sizes, types of stock, minimum paper grippers, printing units, and coating capabilities.Inspect plates for issues such as spots, hickeys, holes, scratches, and other imperfections. Ensure proper file setup with appropriate grippers.Communicate any problems or concerns to Prepress and Impositioning personnel.Verify that plates match Job Ticket and imposed

Rochester, NY 14624 • (32.3 miles) • Full Time • 9/19/2026

Job Summary: We are seeking an experienced and innovative Sr Mechanical Engineer to join our team. This role will lead the design, development, testing, and continuous improvement of commercial HVAC products and systems. The ideal candidate has strong experience in industrial ventilation, process cooling/heating, and contamination control, with a focus on reliability, efficiency, and safety in manufacturing operations.Qualifications:Bachelor’s degree in Mechanical Engineering.5+ years of HVAC engineering experience, with a strong focus on manufacturing or industrial environments.In-depth knowledge of large-scale commercial or industrial HVAC systemsis preferred.Skills & Competencies:Strong analytical and problem-solving abilities in complex industrial systems.Excellent project management a

Marion, NY 14505 • (7.2 miles) • Full Time • 9/19/2026

Our company is seeking an experienced HVAC Service Technician to handle day-to-day service calls across a 50-mile radius around Marion, NY. (Minimal/rare nights and weekends) In this role, you will independently troubleshoot, service, and install residential and light commercial HVAC systems, helping us maintain high service standards as our workload expands. Key ResponsibilitiesTroubleshoot, repair, and service heating boilers, forced air systems, and heat pumps.Perform system installations and routine maintenance independently on service calls, as well as working with the team for installs.Diagnose electrical and mechanical faults accurately and efficiently.Maintain accurate records of service calls, parts used, and customer interactions.Qualifications & RequirementsProven experience ser

Skaneateles Falls, NY 13153 • (32.8 miles) • Full Time • 9/19/2026

Weekend Shift- Saturday and Sunday 2:55pm-11:25pmBASIC QUALIFICATIONS (REQUIRED SKILLS/EXPERIENCE):To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. List knowledge, skills, and/or abilities required.Ability to Read and Understand Instructions:• Candidates must be able to read and comprehend job instructions, part specifications, and assembly drawings. This skill is crucial for following detailed assembly processes accurately.Visual Inspection Skills:• The ability to visually detect defects in components and finished products is essential. This includes attention to detail to ensure quality standards are met.Teamwork and Communication Skills:• The ability to work effectively as part of a team and communicate clearly with colleagues,

Bergen, NY 14416 • (44.5 miles) • Full Time • 9/18/2026

$2500 Hiring Bonus (2nd Shift Only) - after successful completion of 30 days of employment.Oxbo is the worldwide leader in specialty harvesters. We design, manufacture, and distribute innovative harvesting equipment and related products for the application, berry, coffee, field corn, forage, fresh market vegetable, olives, processed vegetable, seed, and vineyard markets.Seeking skilled CNC Machinists to join our 1st and 2nd Shift team. Our operation is a high-mix, low-volume manufacturing environment producing world class agricultural equipment. Unlike high-volume repetitive production machining, our machinists work on a wide variety of components in small batches, often producing only a few pieces at a time.If you enjoy setup work, problem solving, and machining a variety of parts rather

Rochester, NY • (27.1 miles) • Full Time • 9/17/2026

Job Description :· Layout, plan and build to EPP standards, class A plastic injection molds.· Make new parts for existing production molds using hand sketches, blueprints, and cad models.· Document necessary information for mold maintenance procedures per EPP standards.· Participate in New Job Start up Meetings to give input to best manufacturing process.· Understands advanced concepts within professional discipline. Applies knowledge and experience to complex tooling situations.· Performs independently and uses experience to guide actions and recommends solutions to complex tooling issues.· Mentors less experienced colleagues. - Support the Company's mission, vision and values in performance of daily activities.· Recommend incorporation of new technology where feasible and practical.· Tro

Fairport, NY 14450 • (16.2 miles) • Full Time • 9/16/2026

Title: Production SupervisorLocation: Fairport, NY 14450Salary: $85,000 - $95,000 + 10% BonusQualifications:Bachelor’s degree in business, engineering or related field required.2-4 years previous supervisory experience requiredPlastic injection molding backgroundProficient computer skillsMust have ability to effectively work with people in a team environment and at various levels of the organizationMust possess strong verbal, written and interpersonal communication skillsResponsibilities:Supervise and direct work activity of Leads in assigned area.Distribute workload appropriately.Motivate, empower, and develop team members including, but not limited to, constructing and executing development plans.Work with team members to identify continuous improvement opportunities.Constantly identify

Rochester, NY 14606 • (31.2 miles) • Full Time • 9/16/2026

Controls Design EngineerAbout Micro Instrument CorpMicro Instrument Corp provides a progressive and positive work environment. We value our employees and encourage both personal and career growth. Our advanced technology environment presents employees with challenging and satisfying work backed by our core values of hard work and respect in an inclusive environment of diverse, committed and highly accomplished people.Micro Instrument Corp offers employees a compelling package, which includes competitive pay, superior benefits, an outstanding work environment and opportunities for career development. Through these comprehensive offerings, every individual has the chance to achieve significant growth, both financially and professionally.Controls Design EngineerThe Controls Design Engineer is

Rochester, NY 14624 • (32.3 miles) • Full Time • 9/16/2026

With over 50 years of excellence, Precise Tool & Manufacturing Inc. is a family-owned, Rochester-based leader in advanced CNC machining and custom manufacturing. Our 280,000 sq. ft. facility houses more than 160 CNC machines, including vertical turning lathes, horizontal boring mills, high-speed 5-axis machines, and more! We proudly support industries such as aerospace, defense, medical, energy, and power generation with a commitment to quality and innovation. At Precise Tool, we offer competitive pay, comprehensive benefits, and a collaborative work environment built on respect, teamwork, and long-term stability. Interested in joining our team? Apply today!JOB SUMMARYUnder the direct supervision of the Equipment/Facilities Maintenance Group Leader, the CNC/Industrial Maintenance Mechanic

Liverpool, NY • (44.8 miles) • Full Time • 9/16/2026

Label Machine OperatorIconex | Liverpool, NYNight Shift: Sunday–Thursday, 10:00 PM–6:00 AMPay: $23.00–$25.00/hour + $3.50 night differential = $26.50–$28.50/hourPosition OverviewIconex is seeking an experienced Machine Operator to safely operate and maintain high-speed label manufacturing equipment. This is not an entry-level position. Candidates should have at least 2 years of industrial manufacturing equipment experience, preferably in printing, labels, packaging, converting, paper, plastics, or similar environments.Key ResponsibilitiesSet up, operate, adjust, and troubleshoot label manufacturing equipment.Perform machine changeovers and adjustments to maintain quality and productivity.Inspect products using calipers, rulers, gauges, and other measuring tools.Perform minor mechanical adj

Clyde, NY 14433 • (11 miles) • Full Time • 9/15/2026

Benefits:401(k)401(k) matchingCompetitive salaryDental insuranceEmployee discountsHealth insuranceOpportunity for advancementPaid time offTraining & developmentWellness resourcesENGINEERED BUILDING SOLUTIONS LLC is a manufacturer of high quality building components including metal roofing & siding, laminated wood columns, wood floor & roof trusses, and timber accent trusses. Shift & Schedule1st Shift: Monday-Friday, 6:00AM to 3:30PM Overtime available. Paid at time and a half after 40 hours. WOOD COMPONENT FABRICATIONAssemble precut wooden parts using materials and tools providedStage materials for component assemblyLifting and placing precut lumber onto assembly tableVerify dimensions of precut parts for accuracyOperate hand and power tools (hammer, tape measure, saws, presses, pneumatic

Fairport, NY 14450 • (16.2 miles) • Full Time • 9/14/2026

The Printing Machine Operator I position is an entry-level role designed for individuals looking to start a hands-on, stable career in the printing and manufacturing industry. No prior specialized experience is required, as this position focuses entirely on building foundational technical skills through structured on-the-job training. In this role, you will learn the basics of machine setup, equipment maintenance, and quality control.Job Responsibilities:Observe and follow company safety rules and regulationsStart-up, operate, shutdown, & maintain production equipment by following documented work instructions.Manufacture a range of similar commercial products following specific procedures and quality guidelines to ensure product specifications and tolerance levels are met.Adjust print imag

Fairport, NY 14450 • (16.2 miles) • Full Time • 9/13/2026

About QualitrolQualitrol, a division of Ralliant, is a global leader in partial discharge monitoring and asset protection for power generation, transmission, and distribution. We deliver innovative power monitoring solutions to utilities and energy companies worldwide.Position OverviewWe are seeking motivated Production Assemblers to join our C Shift team in Fairport, NY. In this role, you will contribute to meeting daily production quotas while maintaining high quality standards.C Shift: 10:30 PM – 7:00 AMTraining will be conducted on A Shift (7:00 AM – 3:30 PM) for a minimum of 2 months before transitioning to C Shift.Key ResponsibilitiesOperate assembly equipment including hydraulic presses, drill presses, welding machines, air drivers, spin riveters, and winders.Rotate across different

Webster, NY 14580 • (20.3 miles) • Full Time • 9/12/2026

Deburring of Aerospace components using a microscope, lathe, as well as a variety of hand deburring equipment and tumblers.Candidate must have good vision, and preferred to have experience working with a microscope.Willing to train candidates who do not have prior experience.\nCompany DescriptionEast Side Machine is a sub contract machine shop who specializes in the Aerospace and Mass Transit fields. Established in 1984, ESM has a strong reputation industry wide as a top contract machining partner to several tier 1 companies.Company DescriptionEast Side Machine is a sub contract machine shop who specializes in the Aerospace and Mass Transit fields. Established in 1984, ESM has a strong reputation industry wide as a top contract machining partner to several tier 1 companies.

Fairport, NY 14450 • (16.2 miles) • Full Time • 9/12/2026

Job Description:Payrate: $30-32/hr W212 months contract – possible extension based on performance & budget1st Shift: Mon-Fri; 8am to 5pm.We are seeking a CAD Designer to support the development of detailed part specification drawings and manufacturing tooling used in precision fabrication processes.This role will be responsible for creating and maintaining high-quality CAD models and drawings in Creo, with a focus on tooling and fixtures for grinding, polishing, and metrology applications.The ideal candidate will have strong experience in GD&T, detailed manufacturing documentation, and design for manufacturability across both traditional machining methods and FDM additive manufacturing.This individual will work closely with engineering, manufacturing, and metrology teams to ensure designs

Fairport, NY 14450 • (16.2 miles) • Full Time • 9/12/2026

Title: DesignerLocation: Fairport, NY | OnsitePay Rate:$33/Hr on W2Type& Duration: 12 plus months contract possibility of extension based on demand.Scopeof this position:We are seeking a CAD Designer to support the development of detailed part specification drawings and manufacturing tooling used in precision fabrication processes.This role will be responsible for creating and maintaining high-quality CAD models and drawings in Creo, with a focus on tooling and fixtures for grinding, polishing, and metrology applications.The ideal candidate will have strong experience in GD&T, detailed manufacturing documentation, and design for manufacturability across both traditional machining methods and FDM additive manufacturing.This individual will work closely with engineering, manufacturing, and m

Rochester, NY 14624 • (32.3 miles) • Full Time • 9/12/2026

At Century Mold, we don't just mold parts, our customers come to us with their toughest challenges and we mold solutions. The plastics industry is full of challenges and the Century Mold team prides themselves on their problem-solving capabilities. We strive to provide and deliver more not only for our customers but for our team as well.About the Role:This role is responsible for managing daytoday quality control activities to ensure product conformance, process capability, and compliance with customer and quality system requirements. The position oversees quality documentation, PPAPs, inspections, corrective actions, and the supervision and training of Quality Inspectors, while serving as a key liaison with suppliers and customers on quality issues. Success in this role requires strong te

Farmington, NY 14425 • (13.5 miles) • Full Time • 9/10/2026

Pioneer Millworks of Farmington NY is seeking a detail-oriented ShopProduction Associate to join our team. This role is essential to the production of pre-finished wood products, ensuring that they meet the highest standards of quality and presentation. The ideal candidate will be involved in all aspects of production and finishing, from operating equipment applying finish coatings to color matching, and will play a supporting role in our finishing department.Key Responsibilities:Basic Manufacturing: Assist in the preparation of wood products using standard manufacturing tools, equipment and processesFinishing: Work with our finishing team in the processing and manufacturing of pre-finished wood flooring and siding productsQualifications:Strong attention to detail and organizational skills

Ontario, NY 14519 • (15.6 miles) • Full Time • 9/10/2026

Description: Weco is a value-added single-source contract manufacturer of machined components, finished fabricated sheet metal, and assembled metal products. Our three facilities encompass all aspects of metal product manufacturing including our own on-site finishing with powder, paint, and graphics capability. We serve the OEM Industrial, Healthcare/Medical Device, Aerospace/Defense, Renewable Energy, and Electronics by manufacturing both conventional and the most technically demanding items. We have been doing just that for companies from Fortune 500 to small and midsize firms since 1952.Benefits:Competitive salary and benefits packageOpportunity to work with a team of talented professionalsChallenging and rewarding work environmentGenerous Paid Time OffSeveral health insurance plan opti

Farmington, NY 14425 • (13.5 miles) • Full Time • 9/9/2026

Finisher/Finishing Fine Woodworking LeadNew Energy Works – Farmington, NYReports To: Division ManagerWe’re looking for an experienced Lead Finisher to join our passionate and creative Fine Woodworking team in Farmington NY.Role OverviewThis role is a hands-on high craft finishing and woodworking opportunity with room to learn and grow within our team. We work on highly custom residential and commercial projects crafting everything from doors, tables, and stairs to cabinets, furniture, and wine rooms.A successful Lead Finisher will have solid woodworking skills, superior knowledge of finishing materials, techniques, and good eye for detail.We work both locally and regionally, which can mean occasional travel or longer commutes.Core CompetenciesRepairing broken parts, removing imperfections,

Victor, NY 14564 • (17.7 miles) • Full Time • 9/9/2026

Job Summary:TheManufacturing Technicianoperates processing and packaging equipment used to produce and package specialty manufactured products. This role supports daily production by safely weighing, combining, mixing, monitoring, and moving materials through various stages of the process. The technician will complete job-specific training to gain proficiency with equipment, work instructions, and quality/safety expectations. Other duties may be assigned as operational needs require.Job Responsibilities:Promotes and supports a positive, team-oriented work environmentFollows all company policies, safety rules, and required proceduresOperates or assists in operating production and material-handling equipment (training provided)Handles materials manually, including lifting/stacking bags and b

Rochester, NY • (27.1 miles) • Full Time • 9/9/2026

Assemble a better future in this opportunity is built for individuals who take pride in precision, value teamwork, and are ready to be part of something greater. With competitive pay, outstanding benefits, and a family-oriented culture, this role offers more than just a job it’s a chance to grow and thrive. Ideal for detail-driven professionals seeking stability, support, and a strong work/life balance on a convenient first-shift schedule.Viking Cives, a leading distributor of various hydraulic systems, dump bodies, platform bodies, lift gates, sweepers, asphalt equipment, and an assortment of related truck equipment, is seeking an Assembler Welder to join their team in Oakfield, NY.If you have a mechanical background and some welding experience, and are motivated to learn, this is an oppo

Rochester, NY • (27.1 miles) • Full Time • 9/8/2026

Commercial HVAC Technician & Sheet Metal WorkerWe are seeking experienced Commercial HVAC Technicians and Sheet Metal Workers to join our team in Rochester, NY. The ideal candidates will specialize in the installation, maintenance, and repair of HVAC systems and sheet metal components for commercial buildings. This position requires expertise in large-scale systems, attention to detail, and a commitment to safety and quality work.Key Responsibilities:HVAC System Installation & Maintenance: Install, assemble, and repair commercial HVAC systems, including ductwork, air handlers, chillers, boilers, and ventilation systems.Sheet Metal Fabrication & Installation: Measure, cut, assemble, and install sheet metal ductwork and components according to project specifications.Blueprint & Code Complian

Henrietta, NY 14467 • (26 miles) • Full Time • 9/7/2026

We are seeking a Graphic Designer & Print Production Associate to join our team! You will create graphics to meet a commercial or promotional need.Responsibilities:Create eye-catching graphics and engaging designsHandle graphic projects from start to finishDevelop and maintain image library filesCoordinate with outside agencies and services as neededSubmit rough layouts for project approvalQualifications:Previous experience in graphic design or other related fieldsPrevious experience using Adobe Suite is preferredKnowledge of design and photo-editing softwarePossess graphic design portfolioDeadline and detail-oriented\nCompany DescriptionWhen it comes to business communications services, we can do it all. With a complete range of products and services at your disposal, we can help you get

Auburn, NY 13021 • (29.4 miles) • Full Time • 9/5/2026

Mack Studios is seeking an experienced and highly motivated Mechanical Engineer to develop production-ready engineering for custom exhibits, retail fixtures, branded environments, and experiential displays. This is a hands-on working position responsible for engineering projects that incorporate wood, millwork, metal fabrication, hardware, lighting, and specialty components from design through fabrication and installation.Key ResponsibilitiesDevelop production-ready engineering for custom millwork, metal fabrication, fixtures, exhibits, and displays.Create detailed shop drawings, production and assembly drawings, bills of materials (BOMs), and fabrication packages.Engineer components and assemblies using wood, plywood, MDF, laminates, steel, aluminum, plastics, and specialty materials.Crea

Henrietta, NY 14467 • (26 miles) • Full Time • 9/4/2026

PLEASE STATE WHICH OF THE FOLLOWING TWO JOBS YOU ARE INTERESTED IN WHEN YOU SEND YOUR RESUME.Assembly Technician1.0 Executive SummaryTorion USA is seeking a motivated and detail-oriented entry level assembler to join our manufacturing team. In this role, you will support the assembly, fabrication, installation, commissioning, and testing of fusion fuel cycle process piping systems. The position will report to the Torion USA Manufacturing Manager.The ideal candidate is mechanically inclined, eager to learn, comfortable working with hand and power tools, self-starting and committed to producing high-quality work in a manufacturing environment. Previous experience with welding, pipe fitting, electrical installation, or industrial equipment is beneficial but not required.2.0 Key Responsibiliti

Rochester, NY • (27.1 miles) • Full Time • 9/4/2026

We are recruiting an experienced CNC Lathe Setup Machinist for one of Rochester’s fastest-growing CNC machining companies. This is a first-shift opportunity within a new, modern facility producing precision components for the aerospace, defense, and medical industries.Responsibilities:Set up and operate CNC lathes for precision production workInstall and touch off tooling, set work offsets, and complete machine changeoversLoad or edit existing programs and make adjustments at the machinePerform first-piece and in-process inspectionsTroubleshoot tooling, dimensional, finish, and machine-performance issuesRead blueprints, GD&T, setup sheets, and work instructionsUse micrometers, calipers, bore gauges, height gauges, and other inspection toolsAssist operators and less-experienced machinists w

Rochester, NY 14623 • (27.6 miles) • Full Time • 9/4/2026

Javlyn Process Systems is a company specializing in process engineering and control system integration, employing Chemical, Mechanical, and Electrical engineers. We focus on providing automated process system solutions tailored for the food, beverage, and dairy sectors, offering custom designs and professional services aimed at optimizing manufacturing operations.Javlyn is an independent subsidiary of Krones AG, a global entity with a workforce exceeding 16,000 employees worldwide. We are currently looking for an Automation & Controls Engineer to become part of our expanding team.This position necessitates excellent communication abilities, adaptability in a dynamic environment, and a robust understanding of engineering principles.Position OverviewAs a Senior Automation Engineer, you will

Rochester, NY • (27.1 miles) • Full Time • 9/2/2026

Production Manager – Embroidery, Engraving & Heat PressingAbout Recognition ExpertsFor nearly 50 years, Recognition Experts has been a trusted, family-owned staple in custom recognition, corporate awards, embroidered apparel, and promotional products. We take pride in cultivating a friendly, collaborative, multi-generational workplace where every team member is treated like family.We are expanding our operations and seeking a creative, self-motivated Production Manager to oversee our daily customized manufacturing operations. If you are looking for long-term career growth, high operational ownership, and a direct stake in our success through Profit Sharing, we want to hear from you!Position OverviewThe Production Manager will drive back-of-house manufacturing excellence across our speciali

Rochester, NY • (27.1 miles) • Full Time • 9/2/2026

Looking for a offset press operator who can run large and small presses. Older equipment.Full or part time. flexible Hours\nCompany DescriptionFast pace environment providing printed materials to local marketCompany DescriptionFast pace environment providing printed materials to local market

Churchville, NY 14428 • (38.5 miles) • Full Time • 9/1/2026

Company: Wilkins Recreational Vehicles Location: Churchville, NY Job Title:Shop General Laborer Salary Range:$16.00 - $18.00 per hourEligible for bonus opportunities.Benefits:Competitive WagesMedical/Dental/Vision Insurance401K/401K Matching ProgramPTO/Sick TimeVoluntary Benefit ProgramEmployee Referral ProgramEmployee DiscountRV Borrowing ProgramJoin a team with a legacy of excellence! Wilkins RV, a family-owned business spanning three generations, is the premier RV dealer in New York, offering top-quality RVs, outstanding customer service, and a passion for adventure. With seven locations throughout New York State, we provide a dynamic and supportive work environment where team members can grow and succeed. If you're looking for a rewarding career in a thriving industry, come be part of

Rochester, NY 14606 • (31.2 miles) • Full Time • 8/31/2026

Steel fabrication consists of bolting and/or welding parts to main steel members such as beams and columns per the design drawing. Material are move with overhead cranes and forklifts. We prime paint finished products and load trucks for delivery.CNC machines include Ocean Clipper II angle line to process angle iron, Hypertherm Plasma table that process plate parts, Ficep FRC plasma line that cuts beams, tubes and misc shapes, (2) Ficep drill lines with band saws. We also fabricated light industrial steel such as stairs and railings.We are seeking a detail-oriented CNC Machine Operator to operate and maintain CNC fabrication equipment used in structural steel processing. This role is responsible for setting up, operating, and monitoring CNC machinery to cut, drill, and process steel compon

Skaneateles, NY • (35.8 miles) • Full Time • 8/31/2026

Chipton Ross is seeking Manufacturing Operators for 3 month possible temp to perm contract positions.1st Shift: $20.00/hr. (06:30am - 03:00pm Monday - Friday)1st Shift - $22.00/hr. (Saturday & Sunday: 6:00 AM – 6:00 PM, Thursday & Friday: 6:30 AM – 3:00 PM)2nd Shift Part Time - $21.40/hr. (2:55 PM – 11:25 PM Sat & Sun)3rd Shift - $22.00/hr. (10:15 PM – 6:45 AM Sunday – Thursday)RESPONSIBILITIES:Assembly of small parts by following Manufacturing Process Sheets in a high paced environment while performing error free Quality work.REQUIREMENTS:You must have good mechanical dexterity/eyesight, be able to read, write and use basic math; maintain a high degree of accuracy in performing repetitive tasks. As well as the ability to be able to adapt to a changing work environment, including: increase

Rochester, NY 14621 • (26.9 miles) • Full Time • 8/29/2026

Description: General Job Summary:Responsible for assembly/packing of sheet metal components of small or medium sized parts, fitting and/or adjustment of inter-related parts and/or assembly based on written specifications.Essential Duties and Responsibilities:To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individual with disabilities to perform the essential job functions.Follows all safety processes and procedures in accordance with job and Company requirements.Following specific written instructions and/or blueprints, assembles components into finished product.Disassembles and re-buil

Rochester, NY 14606-3006 • (27.1 miles) • Full Time • 9/22/2026

Description: Position SummaryOperates CNC (Computer Numerically Controlled) lathes or mills or to machine metallic and nonmetallic work pieces to produce precision machined parts to acceptable levels of efficiency and quality on both new and existing production processes. Works on the highest level, most complicated jobs. Operates machining centers on repetitive production work involving skill and dexterity in the operating. Attention is required to prevent damage product or damage to machine center. Makes necessary machine adjustments to ensure satisfactory production. Inspect work for obvious defects and dimensional integrity. Mentors and leads lower level employees.Essential Duties and ResponsibilitiesIn addition to adhering to the policies of the company outlined in the PGM Employee Ha

Rochester, NY 14623 • (27.6 miles) • Full Time • 9/22/2026

Join JK Findings as a Full-Time Machine Operator and become an integral part of our dynamic team located in Rochester, NY. In this onsite role, you'll have the opportunity to work directly with cutting-edge machinery in a collaborative environment that thrives on innovation and excellence. This position allows you to develop your skills as a problem solver while engaging in projects that require a forward-thinking approach. Your contributions will directly impact our customer-centric mission, providing you with a sense of accomplishment and pride. Be part of a high-performance culture where your ideas are valued and where you will grow alongside passionate colleagues.If you are driven, eager to learn, and ready to take on new challenges, this is the perfect opportunity to elevate your care

Rochester, NY 14624 • (32.3 miles) • Full Time • 9/22/2026

PRESS BRAKE SET UP/OPERATORAdvantech Industries Inc. is a family-owned manufacturing company based in Rochester, New York, specializing in CNC machining, sheet metal fabrication, welding, and assembly services. The company, founded in 2002, serves multiple industries, including defense, medical, and aerospace, and operates out of a 250,000-square-foot facility.Advantech Industries Inc. is currently recruiting a Press Brake Set Up/Operator.DUTIES & RESPONSIBILITIESThe Press Brake Set Up/Operator is responsible for the set up and observation of machines to verify the accuracy of the machine settings and to detect the malfunction or out-of-tolerance machining, by using precision measuring instruments such as micrometers and calipers. Duties include, but are not limited to, the following:Set-u

Rochester, NY 14620 • (26 miles) • Full Time • 9/22/2026

CAD/CAM Designer – Full Arch Designer - to work with Full Arch TeamLocation: New YorkPay: $32.00–$40.00 per hour (DOE)Job Type: Full-TimePosition SummaryWe are seeking an experienced CAD/CAM Full Arch Designer to join our growing dental laboratory team. The ideal candidate has 5+ years of experience designing full-arch implant restorations and is passionate about producing high-quality, esthetic, and functional restorations. This is a leadership role for someone who enjoys mentoring team members, improving workflows, and maintaining exceptional quality standards.ResponsibilitiesDesign full-arch implant restorations, including All-on-X and hybrid prostheses, using CAD software.Design crowns, bridges, implant restorations, bars, and other complex restorative cases as needed.Review digital sc