Waverly, NY 14892-9327 • (28 miles) • Full Time • $23.00 / hr • 10/29/2026

Best Bev is a full service beverage contract manufacturing company located in Waverly, NY. Our mission is to provide our customers with the most affordable co-packing amenities while maintaining the highest quality. Our wide range of equipment means no order is too small or too large. Interested in an entrepreneurial work environment? Best Bev is the right fit for you! We take pride in providing our employees with upward growth opportunities and the chance to develop meaningful relationships within the Best Bev family to build a long-lasting career! Best Bev offers competitive compensation and benefits to all our employees. Processing Technician Responsibilities: Follows all work instructions and SOPs, as well as Best Bev policies, procedures, GMPs (Good Manufacturing Practices) and safety

Corning, NY 14831 • (0 miles) • Full Time • $55.92 to $60.92 / hr • 10/28/2026

Our Client, a Business Manufacturing and Supply company, is looking for a Mechanical Design Engineer for their Corning, NY location. Responsibilities: Work closely with internal project team to understand design requirements Independently determines and develops approaches to solutions Responsible for installation and debug at factory site Provide hands on input and insight into equipment installation and troubleshooting Verify equipment build and layout against drawings Coordinate installation plan with safety and plant receivers Confer with client engineers and vendors to resolve equipment install or build discrepancies. Requirements: 7+ years of mechanical equipment design experience Proficient with SolidWorks Competent with structural FEA analysis Experience with design, install, start

Corning, NY 14831 • (0 miles) • Full Time • $25.00 to $28.00 / hr • 10/28/2026

Duration: 12 months with possible extension Experience: Set up and configure injection molding machines, auxiliary equipment, and molds according to experimental plans. Operate and monitor machines during experimental and production runs to ensure optimal performance. Diagnose and resolve process or equipment issues, including machine malfunctions and molding defects. Perform routine maintenance on molds, machines, and auxiliary equipment to minimize downtime and ensure reliability. Maintain accurate documentation of machine settings, experimental data, and maintenance activities. Follow all safety protocols and procedures to ensure a safe working environment. Required Qualifications Minimum 1 year (2-5 preferred) injection molding experience. Must have hands-on experience in operating inj

Corning, NY 14831 • (0 miles) • Full Time • $55.00 to $64.00 / hr • 10/28/2026

Location On-site at Sullivan Park in Corning, NY Education BS in Mechanical Engineering, Mechatronics, Mechanical Technology required Minimum Experience 7 years Duration 1 year with potential to extend Travel Requirements Domestic travel up to 25% to vendor or plant sites Work Schedule Monday-Friday 40 hours with overtime as required Immigration Status Must be eligible to work in the US for a minimum of 18 months Interview Process Initial Teams call with manager 2nd round will be with additional team members Manager is willing to consider non-local candidates who are willing to relocate at their own expense. This role is not simply design. Candidates should not shy away from hands-on builds/install/startup/debug of the equipment they design. Scope of Position A senior mechanical design eng

Corning, NY 14831 • (0 miles) • Full Time • $35.00 to $38.00 / hr • 10/28/2026

Position Summary The Mechanical Technician IV supports engineering projects related to manufacturing capacity additions, line installations, equipment debug, and mechanical readiness for operations receivership. This role supports manufacturing engineering projects during development and execution to ensure timely, error-free mechanical support for multi-line equipment installations. The role also works closely with cross-functional internal and external teams, vendors and suppliers on a daily basis to resolve technical issues and protect project scope, timing, cost, and overall installation goals by providing and applying mechanical expertise. Applicants must have strong technical knowledge in mechanical engineering, troubleshooting and design processes to proactively identify root causes

Corning, NY 14831 • (0 miles) • Full Time • $23.00 to $26.79 / hr • 10/28/2026

Description Title: Injection Molding Technician 100% onsite,40 hours a week (5 days a week, 8am - 5pmish) Local candidates only Interview process: Phone screen, then onsite interview Required skills: Minimum 1 year (2-5 preferred) injection molding experience. Scope of Position (i.e. projects involved with and role within group): • Set up and configure injection molding machines, auxiliary equipment, and molds according to experimental plans. • Operate and monitor machines during experimental and production runs to ensure optimal performance. • Diagnose and resolve process or equipment issues, including machine malfunctions and molding defects. • Perform routine maintenance on molds, machines, and auxiliary equipment to minimize downtime and ensure reliability. • Maintain accurate document

Owego, NY 13827 • (41.3 miles) • Full Time • $83.00 to $93.00 / hr • 10/28/2026

Position would require the candidate to be a W2 employee of Donatech. US Citizenship Required. The engineer must have 10+ years of experience with required tools and will design, document, and test digital circuit cards. During the design phase they with develop specification documentation and capture the electrical schematics. Post design, they will work integration and develop design verification tests. They will work with the broader development team to deliver documentation, develop circuit card design data, and perform integration and test on the developed hardware. REQUIRED TOOLS: HyperLynx - Siemens Ansys HFSS Xpedition - Siemens 10+ yrs of experience

Owego, NY 13827-3900 • (44.5 miles) • Full Time • $50.00 to $93.00 / hr • 10/28/2026

Description: The engineer have 10 years of experience with required tools and will design, document, and test digital circuit cards. During the design phase they with develop specification documentation and capture the electrical schematics. Post design, they will work integration and develop design verification tests. They will work with the broader development team to deliver documentation, develop circuit card design data, and perform integration and test on the developed hardware. REQUIRED TOOLS: HyperLynx - Siemens Ansys HFSS Xpedition - Siemens

Elmira, NY 14904 • (13.8 miles) • Full Time • $22.00 to $26.00 / hr • 10/27/2026

Elmira Stamping & Manufacturing is seeking a detail-oriented Laser Programmer to join our team. This is a great opportunity for someone who enjoys working with CAD/CAM technology, solving manufacturing challenges, and seeing their work go directly from the computer to the production floor. The Laser Programmer is responsible for preparing and optimizing programs for our CNC laser cutting equipment. This includes working from customer drawings and part files, creating efficient material layouts, preparing cutting programs, and working closely with the production team to ensure parts are produced accurately and efficiently. Position Responsibilities Create and modify CNC laser cutting programs using CAD/CAM and nesting software. Review customer drawings, blueprints, and specifications to ens

Elmira, NY 14901 • (16.9 miles) • Full Time • $22.00 to $29.00 / hr • 10/27/2026

Description: Summary Inspects, tests and/or measures materials, products, installations or other work for conformance to specifications. Discards or rejects products, materials, or equipment not meeting specifications. Trains and collaborates with other General Inspectors. Specific Duties and Responsibilities: Examines material or product for surface defects such as cracks/pits/incomplete welds Assists in maintaining the SEPAC Quality Management System/Ensures product & process compliance on the shop floor Compares product with parts list/drawing to ensure completion of assembly Conducts and supports the first article process, data collection and documentation, etc. Verifies specified dimensions of product/material Rejects/documents issues for defective parts Tests parts for hardness/plati

Dresden, NY 14441 • (37.6 miles) • Full Time • $150,000 to $170,000 / yr • 10/27/2026

Head of Power Plant Operations & Pipeline Location: Dresden, NY Employment Type: Full-Time | Leadership Salary: $150,000–$170,000 + 20–25% Annual Bonus Relocation: Full Relocation Assistance Available Recruiting Partner: Sheridan HR, on behalf of Vulcan Infrastructure and Power Inc. (Formerly Greenidge Generation Holdings Inc.) About the Opportunity Sheridan HR is partnering with Vulcan Infrastructure and Power to identify an experienced Head of Power Plant Operations & Pipeline to lead day-to-day operations at its 106 MW natural gas-fired steam generating facility in Dresden, New York. This is a critical leadership role for an experienced power-generation professional who understands the technical, operational, safety, and business demands of a steam-cycle generating facility. Reporting t

Penn Yan, NY 14527 • (36 miles) • Full Time • $18.00 to $25.00 / hr • 10/22/2026

Job Summary : Responsible for inspecting and repairing hydraulic systems and components. Essential Duties & Responsibilities • Troubleshoot and diagnose hydraulic and pump systems and the ability to repair them. • Identify parts needed for all repairs. • Additional experience troubleshooting hydraulic hoses, fittings, cylinders, valves and pump equipment are a plus but not required. • Completes the proper repair paperwork for ordering parts. • Observe all safety procedures and policies and use proper protective equipment (especially eye, ear protection and steel toe shoes/boots, gloves, etc.) • Keep work area clean and organized. • Report all injuries, near misses and accidents immediately to a supervisor. • All other duties as assigned. Education, Skills, and Experience • Ability to read

Painted Post, NY 14870 • (4.2 miles) • Full Time • $65.00 / hr • 10/22/2026

Job title: Mechanical Designer Location: Painted Post, NY Pay Rate: $65/hr Duration:1 year with potential to extend longer Minimum Experience: 5+ years of experience in mechanical design, manufacturing support, product development, or process equipment design or BS in Mechanical Engineering with less experience. Proficiency with SolidWorks and Inventor for 3D modeling, assemblies, detailed drawings, and engineering documentation and AutoCAD for 2D. Experience with at least two of the three software required. Key Responsibilities: Create and revise 3D models, 2D drawings, assemblies, fabrication details, and bills of material using SolidWorks, Inventor and AutoCAD. At least two of the 3 software required. Apply GD&T, tolerance analysis, and engineering standards to ensure designs are clear,

Horseheads, NY 14845 • (12 miles) • Full Time • $17.00 to $40.00 / hr • 10/22/2026

Build a Long-Term Career with a Trusted Local Electrical Contractor C.M. Armitage, Inc. is an established electrical contractor serving Rochester and surrounding areas, and we are seeking skilled, dependable electricians to join our growing team. We offer steady, year-round work , well-organized job sites, and a company culture that values safety, professionalism, and quality craftsmanship. If you’re looking for a place where your experience is respectedand where you can build a long-term careerthis is the opportunity. Why C.M. Armitage? Local projects home at night Steady work with an established company Competitive pay based on experience Safety-focused and organized job sites Team-oriented environment with room to grow What You’ll Be Doing Install, maintain, and repair electrical system

Owego, NY 13827 • (41.3 miles) • Full Time • $22.00 to $25.00 / hr • 10/22/2026

Let’s Solve Manufacturing DataTogether Are you the person teams call when data gets complicated? Chipton-Ross is seeking a contract PLM Manufacturing Data Planner to support a client in Owego, NY. This full-time, 1st-shift role (4/10 schedule) centers on elevating part attribute data to power smarter, faster production. What Will You Tackle? Partner with Manufacturing Engineers, Master Data Analysts, and Component Engineers to drive part data quality Diagnose and resolve cross-site data issues, system errors, and mismatches with minimal direction Advise on automation improvements within PLM to reduce manual effort Produce and socialize metrics that track data health and process outcomes Onboard and train new engineers in data stewardship practices Serve as the SME for database administrati

Campbell, NY 14821 • (10.2 miles) • Full Time • $22.00 to $27.00 / hr • 10/21/2026

HIRING: Special Inspector Job Description The Special Inspector monitors construction activities on-site to verify that work practices, materials, and installations comply with applicable codes, standards, and project specifications. This role involves observing work in progress, documenting inspection results, coordinating material testing, and preparing clear records and sketches that correlate with testing and inspection locations. The position offers structured training, opportunities for professional growth, and the chance to contribute to high-quality, compliant construction projects within an expanding construction division. Responsibilities Observe construction work in progress to ensure that procedures, methods, and materials comply with relevant codes, standards, and project spec

Romulus, NY 14541 • (43.5 miles) • Full Time • $20.00 to $30.00 / hr • 10/20/2026

Position Summary Seneca Dairy Systems is seeking an experienced Mechanical Design Engineer to join our growing engineering team. This is an on-site position based in Romulus, NY and is not eligible for remote or hybrid work. The Mechanical Design Engineer will be responsible for designing, developing, and improving custom dairy equipment and agricultural systems using SolidWorks as the company's primary CAD platform. This position works closely with project managers, manufacturing, and installation teams to develop innovative, high-quality solutions from concept through production. Core Values & Expectations Arrives on time each day with a ready-to-work attitude Maintains strong moral and ethical standards Self-motivated with an eagerness to learn and grow Displays a positive, cheerful att

Corning, NY 14831 • (0 miles) • Full Time • $37.00 / hr • 10/17/2026

Key Responsibilities Set up and configure injection molding machines, auxiliary equipment, and molds according to experimental plans Operate and monitor machines during experimental and production runs to ensure optimal performance Diagnose and resolve process or equipment issues, including machine malfunctions and molding defects Perform routine maintenance on molds, machines, and auxiliary equipment to minimize downtime and ensure reliability Maintain accurate documentation of machine settings, experimental data, and maintenance activities Follow all safety protocols and procedures to ensure a safe working environment Required Qualifications 1+ years of experience High School Diploma Associate's Degree in Manufacturing, Plastics Technology, or a Related Field Skills Injection Molding Mac

Freeville, NY 13068 • (43.3 miles) • Full Time • $25.00 to $38.00 / hr • 10/17/2026

At Incodema3D, we are creating a culture and organization that is truly unique. We focus on innovative additive manufacturing technology in support of aerospace, defense, and other industrial applications. We value the commitment of our employees and strive to create a positive working environment where people can do their best. We are seeking a highly motivated and detail-oriented CNC Machinis t to join our dynamic Machining team. In this role, you will be a key player in bridging the gap between innovative additive manufacturing and the demanding requirements of precision machining. This is a fulltime position working Monday through Friday from 6:00am until 2:30pm. What you'll do: You will be responsible for the hands-on machining of complex, additively manufactured parts, transforming t

Hornell, NY 14843 • (32.6 miles) • Full Time • $92,000 to $125,000 / yr • 10/15/2026

iNRCORE Group is a leading, vertically integrated provider of highly engineered, high-reliability, and high-performance passive electronic components. We are known for manufacturing proprietary magnetics, capacitors, resistors, filters, and more. We serve mission-critical data and power applications in the Defense, Aerospace & Avionics, Space, Smart Grid, Medical, AI/Data center, and Hi-Rel industrial markets. iNRCORE Group currently has fourteen (14) manufacturing facilities across the globe with more than one thousand (1000+) employees – and growing! Our business entities include company names such as Bicron, Coast Magnetics, DYCO, Gowanda, iNRCORE, Passive Plus, RCD, Sentran, TTE, and Vanguard Electronics. Our organization has a world-class reputation for innovation, quality products an

Hall, NY 14463 • (44.8 miles) • Full Time • $16.00 to $28.00 / hr • 10/14/2026

Why LandPro Equipment? We’re proud to be a trusted John Deere dealer serving communities across New York, Ohio, and Pennsylvania but what sets us apart is how we show up every day. Our goal is simple, to be the most respected dealership by living our PRO values: Professionalism, Respect, and Outstanding Service. At LandPro Equipment, our team members aren’t just employees, they’re PROs. A Day in the Life of a Set-Up Technician As a Set-Up Technician , your day is focused on preparing equipment for delivery, demonstration, and customer use. You may spend your morning assembling new equipment, installing attachments or integrated solutions, and performing pre-delivery inspections. Throughout the day, you’ll test systems, complete setup procedures, and ensure equipment is clean, safe, and ope

Horseheads, NY 14845 • (12 miles) • Full Time • $43,000 to $53,000 / yr • 10/5/2026

About the Role This team member will play a critical role within our MEP team, leading electrical system designs, performing power distribution analysis, selecting equipment, and managing the preparation of engineering documents. The role involves collaborating with senior engineers, mentoring junior staff, and ensuring compliance with industry standards, energy codes, and best practices for power, lighting, lighting control, and fire alarm systems. Key Responsibilities Design of electrical systems for commercial, institutional, and industrial buildings. Perform load calculations, short-circuit analysis, and voltage drop calculations for system design. Select and specify electrical distribution equipment, lighting systems, and controls. Coordinate fire alarm system specifications and layou

Westfield, PA 16950 • (30 miles) • Full Time • 10/27/2026

Kelly® is looking for a Production Operator to work at a premier manufacturing client in Westfield, PA offering fully paid training. Let us help you grow at work and discover the next step in your career, all while being a vital part of your community. Salary/Pay Rate/Compensation: $17.50–$19.50 per hour Temp-to-Hire Opportunities! Shifts: Sun-Tuesday then every other Wednesday 7pm-7amPay Rate $17.50 Thursday-Saturday then every other Wednesday 7pm-7am Pay Rate $19.50 Why you should apply to be Production Operator: Enjoy paid break time & lunch breaksget paid to recharge! No experience required; comprehensive training provided from day one. Access to advancement opportunitiesyour career growth matters. Work in a comfortable, climate-controlled, clean, and welcoming environment. Join a supp

Horseheads, NY 14845 • (12 miles) • Full Time • $17.00 / hr • 10/27/2026

Salary: $17 per hour + none Reference: 1117006-19 Job Description: We are looking for coachable individuals to help increase production. No experience required. Room to advancement. Potential pay increase after first 600 hours. You will be helping create our amazing chocolate Turtles, as well as preparing them for shipment. Positive work environment. Overtime available. On the job training & promotion from within. START IMMEDIATLY. Next day pay available with INSTANT- if you can make attendance a priority, we want to speak with you! location: Horseheads, NY work hours: 06:00 AM - 06:00 PM dress code: Steel toe/composite toe shoes or boots are required Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information, Disa

Towanda, PA 18848 • (41.1 miles) • Full Time • 10/5/2026

Description: Position Overview Responds to emergency service calls, 24 hours/day, 7 days/week, to perform tire repairs, replacements, and general service to tires and wheels at customer’s location, on the road, or at STTC. Responsible for delivering prompt, courteous and professional service to STTC internal and external customers. The person who takes this job should be willing to make customer satisfaction a number one priority, must be flexible and understand that job priorities will constantly change due to customer preference. Essential Job Functions (include the following. Other duties may be assigned.) Provide OTR tire service on large equipment, primarily at customer locations (quarries, mines, ports and construction sites). Mounting, dismounting, balancing, replacing, repairing of

Elmira, NY 14904 • (13.8 miles) • Full Time • $17.00 to $20.00 / hr • 10/29/2026

Elmira Stamping & Manufacturing is seeking a skilled and dependable Punch Press Operator to join our manufacturing team. In this role, you will operate heavy-duty mechanical and hydraulic power presses to produce high-quality, precision metal stampings and components. The ideal candidate has strong mechanical aptitude, attention to detail, and a commitment to maintaining high standards for safety, quality, and productivity. Position Responsibilities Safely and efficiently operate mechanical and hydraulic punch presses. Monitor machine performance and make real-time adjustments as needed. Read and interpret blueprints, technical drawings, and production specifications. Perform quality inspections using calipers, micrometers, and other measuring equipment. Inspect finished parts to ensure th

Corning, NY 14831 • (0 miles) • Full Time • $60.00 to $66.00 / hr • 10/28/2026

Duration: 12 months with possible extension Description: A senior mechanical design engineer responsible for providing detailed mechanical designs of handling and process equipment. Responsible for all aspects of the design, build and debug of equipment including vendor management. hands-on mechanical support for the installation, start-up and debug glass manufacturing process equipment. This includes working with a multi-functional team (mechanical, electrical, controls, facilities, IT, operations, etc.) Involves the application of mechanical principles encompassed in mechanics, hydraulics, thermodynamics, metallurgy, and machine design used for the design, production, operation, and use machinery of all types. Responsibilities: Work closely with internal project team to understand design

Corning, NY 14831 • (0 miles) • Full Time • $40.00 to $50.00 / hr • 10/28/2026

Location: Painted Post, NY Type: 100% On-Site Schedule: Typically 8AM-5PM, Mon-Fri but anticipate some longer/off-shift hours to support project needs. Interview Process : 30 minute initial screening via teams, then 60 minute panel interview (presentation not required). Manager will consider nonlocal candidates willing to relocate at their own expense. Required Education/Experience: Minimum of HS Diploma. Degree not required. 5 years proven hands on experience required. Proven capability in mechanical design, detailing, manufacturing support, and equipment development is valued more than specific credentials. Position Summary We are seeking an experienced Mechanical Design Technician or Mechanical Designer to support the development of custom equipment, fixtures, tooling, prototypes, and m

Corning, NY 14831 • (0 miles) • Full Time • $60.00 to $61.30 / hr • 10/28/2026

Title: Mechanical Engineer III Location: On-site at Sullivan Park in Corning, NY Education: BS in Mechanical Engineering, Mechatronics, Mechanical Technology required Minimum Experience: 7+ years Duration: 1 year with potential to extend Travel Requirements: Domestic travel up to 25% to vendor or plant sites Work Schedule: Monday-Friday 40 hours with overtime as required Immigration Status: Must be eligible to work in the US for minimum of 18 months Interview process: Initial teams call with manager, 2nd round will be with additional team members. Manager is willing to consider non-local candidates who are willing to relocate at their own expense. *This role is not simply design. Candidates should not shy away from hands on builds/ install/ startup/ debug of the equipment they design. SCOP

Painted Post, NY 14870 • (4.2 miles) • Full Time • $50.00 to $60.00 / hr • 10/28/2026

Duration: 1 year with potential to extend longer Location: PAINTED POST, NY Type: 100% On-Site Preference: Local candidates preferred, but will consider those willing to relocate at their own expense. Interview Process Initial 30-minute screening via Teams Panel interview with CAD skills test/assessment Local candidates may be invited for an in-person interview Minimum Experience 5 years of experience in mechanical design, manufacturing support, product development, or process equipment design, OR BS in Mechanical Engineering with less experience Proficiency with SolidWorks and Inventor for 3D modeling, assemblies, detailed drawings, and engineering documentation, and AutoCAD for 2D. Experience with at least two of the three software required. Key Responsibilities Create and revise 3D mode

Owego, NY 13827 • (41.3 miles) • Full Time • $88.00 to $93.00 / hr • 10/28/2026

Our Client, an Aerospace and Defense company, is looking for an Electrical Engineer for their Owego, NY location. Responsibilities: During the design phase they with develop specification documentation and capture the electrical schematics. Post design, they will work integration and develop design verification tests. They will work with the broader development team to deliver documentation, develop circuit card design data, and perform integration and test on the developed hardware. Requirements: HyperLynx - Siemens Ansys HFSS Xpedition - Siemens 10+ yrs of experience The engineer have 10+ years of experience with required tools and will design, document, and test digital circuit cards. Why Should You Apply? Health Benefits Referral Program Excellent growth and advancement opportunities

Hornell, NY 14843 • (32.6 miles) • Full Time • $83,400 to $125,000 / yr • 10/15/2026

iNRCOREGroup is a leading, vertically integrated provider of highly engineered, high-reliability, and high-performance passive electronic components. We are known for manufacturing proprietary magnetics, capacitors, resistors, filters, and more. We serve mission-critical data and power applications in the Defense, Aerospace & Avionics, Space, Smart Grid, Medical, AI/Data center, and Hi-Rel industrial markets. iNRCORE Group currently has fourteen (14) manufacturing facilities across the globe with more than one thousand (1000+) employees – and growing! Our business entities include company names such as Bicron, Coast Magnetics, DYCO, Gowanda, iNRCORE, Passive Plus, RCD, Sentran, TTE, and Vanguard Electronics. Our organization has a world-class reputation for innovation, quality products and

Romulus, NY 14541 • (43.5 miles) • Full Time • $19.00 to $23.00 / hr • 10/15/2026

Production Painter – Job DescriptionCompany Seneca Dairy Systems, LLC Position Summary Seneca Dairy Systems, LLC is seeking a reliable and detail-oriented Production Painter to support industrial painting and finishing operations. This role is responsible for preparing surfaces, mixing and applying coatings, operating painting equipment, and assembling finished products while maintaining high quality and safety standards. Core Values & Expectations - Arrives on time each day with a ready-to-work attitude - Maintains strong moral and ethical standards - Self-motivated with an eagerness to learn - Displays a positive, team-oriented attitude - Demonstrates strong attention to detail Key Responsibilities - Prepare metal surfaces for painting by cleaning, sanding, grinding, masking, and perform

Horseheads, NY 14845 • (12 miles) • Full Time • $17.00 to $18.00 / hr • 10/27/2026

Salary: $17 - 18 per hour + none Reference: 1117024-6 Job Description: We are looking for coachable individuals to help increase production. No experience required. Room to advancement. Potential pay increase after first 600 hours. You will be helping create our amazing chocolate Turtles, as well as preparing them for shipment. Positive work environment. Overtime available. On the job training & promotion from within. START IMMEDIATLY. Next day pay available with INSTANT- if you can make attendance a priority, we want to speak with you! location: Horseheads, NY work hours: 06:00 PM - 06:00 AM dress code: Steel toe/composite toe shoes or boots are required Equal Opportunity Employer: Race, Color, Religion, Sex, Sexual Orientation, Gender Identity, National Origin, Age, Genetic Information,

Corning, NY 14831 • (0 miles) • Full Time • $25.00 to $27.00 / hr • 10/28/2026

Description Title: Injection Molding Technician 100% onsite,40 hours a week (5 days a week, 8am - 5pmish) Local candidates only Interview process: Phone screen, then onsite interview Required skills: Minimum 1 year (2-5 preferred) injection molding experience. Scope of Position (i.e. projects involved with and role within group): • Set up and configure injection molding machines, auxiliary equipment, and molds according to experimental plans. • Operate and monitor machines during experimental and production runs to ensure optimal performance. • Diagnose and resolve process or equipment issues, including machine malfunctions and molding defects. • Perform routine maintenance on molds, machines, and auxiliary equipment to minimize downtime and ensure reliability. • Maintain accurate document

Corning, NY 14831 • (0 miles) • Full Time • $45.00 to $50.00 / hr • 10/28/2026

Supervisor: Richard Hagan Duration: 1 year, potential to extend Location: Painted Post, NY Type: 100% On-Site Travel: 0% travel is anticipated Schedule: Typically 8AM-5PM, Mon-Fri but anticipate some longer/off-shift hours to support project needs. Interview Process: 30 minute initial screening via teams, then 60 minute panel interview (presentation not required). Manager will consider nonlocal candidates willing to relocate at their own expense. SPOTLIGHT CALL TO BE HELD WED, 9/23 AT 2:30PM EST! Required Education/Experience: Minimum of HS Diploma. Degree not required. 5 years proven hands on experience required. Proven capability in mechanical design, detailing, manufacturing support, and equipment development is valued more than specific credentials. Position Summary We are seeking an e

Painted Post, NY 14870 • (4.2 miles) • Full Time • $50.00 to $53.00 / hr • 10/28/2026

Duration: 12 months with possible extension Required Education/Experience: Minimum of HS Diploma. Degree not required. 5 years proven hands on experience required. Proven capability in mechanical design, detailing, manufacturing support, and equipment development is valued more than specific credentials. Position Summary We are seeking an experienced Mechanical Design Technician or Mechanical Designer to support the development of custom equipment, fixtures, tooling, prototypes, and manufacturing systems. The successful candidate will transform conceptual designs and engineering direction into complete, manufacturable mechanical designs ready for procurement, fabrication, assembly, and deployment. This role requires strong practical mechanical design experience, expertise with SolidWorks a

Painted Post, NY 14870 • (4.2 miles) • Full Time • $55.00 to $60.00 / hr • 10/28/2026

Corning job title: Mechanical Designer Duration: 1 year with potential to extend longer Location: PAINTED POST, NY Type: 100% On-Site Preference is for local candidates, but will consider candidates willing to relocate at their own expense. Interview process: Initial 30 minute screening via Teams Panel interview with CAD skills test/assessment **Locale candidate may be invited in-person interview. Minimum Experience: 5+ years of experience in mechanical design, manufacturing support, product development, or process equipment design or BS in Mechanical Engineering with less experience. Proficiency with SolidWorks and Inventor for 3D modeling, assemblies, detailed drawings, and engineering documentation and AutoCAD for 2D. Experience with at least two of the three software required. Key Resp

Elmira, NY 14903 • (9.3 miles) • Full Time • $25.00 to $30.00 / hr • 10/28/2026

Process Technician – Plastic Division 2nd Shift | Monday–Friday | 3:00 PM – 11:00 PM Overtime Opportunities Available Pay Rate: $25.00 – $30.00 per hour We are seeking a skilled and motivated Process Tech to join our client's Plastic Division. This is a great opportunity to work in a collaborative production environment where teamwork, quality, and safety are top priorities. This position has the potential to transition into a permanent role based on performance and business needs. Position Summary The Equipment Mechanic will support shop floor production by setting up and maintaining thermoforming equipment, performing quality checks, and ensuring machinery operates efficiently to meet production goals. This role works closely with team members to promote unity, productivity, and continuo

Horseheads, NY 14845 • (12 miles) • Full Time • $25.00 / hr • 10/28/2026

Spring Manufacturing Setup Technician Pay: $25.00 per hour Monday thru Friday: 7am to 3:30pm Employment type: Temporary with the opportunity to transition to full-time employment Horseheads, NY Position Overview Nesco Resource is seeking an experienced and motivated Compression Spring Setup Technician to join our clients manufacturing team. This is an excellent opportunity for a mechanically skilled individual with manufacturing setup experience who takes pride in producing high-quality precision components. In this role, you will set up, operate, troubleshoot, and optimize compression spring coiling equipment to ensure products meet customer specifications and production requirements. The ideal candidate will have 2–5 years of setup experience in spring manufacturing, wire forming, precis

Owego, NY 13827 • (41.3 miles) • Full Time • $90.00 to $93.00 / hr • 10/28/2026

The engineer have 10+ years of experience with required tools and will design, document, and test digital circuit cards. During the design phase they with develop specification documentation and capture the electrical schematics. Post design, they will work integration and develop design verification tests. They will work with the broader development team to deliver documentation, develop circuit card design data, and perform integration and test on the developed hardware. REQUIRED TOOLS: HyperLynx - Siemens Ansys HFSS Xpedition - Siemens EEO: “Mindlance is an Equal Opportunity Employer and does not discriminate in employment on the basis of – Minority/Gender/Disability/Religion/LGBTQI/Age/Veterans. ”