Concord, NC 28025 • (21.3 miles) • Full Time • 11/1/2026

Major Responsibilities: Demonstrates knowledge in various modes and methods of oxygen delivery and the equipment needed for each and can conduct prescribed therapeutic procedures to achieve adequate oxygenation. Administers therapeutic procedures, understanding the purpose and benefits, and possible effects associated with each. Performs diagnostic procedures as outlined in policy. Initiates, monitors and maintains mechanical ventilators and non-invasive ventilators and is aware of the critical care duties and effects of such therapy. Independently evaluates current therapies using appropriate judgment and protocols, making proper recommendations concerning plans of care and patient education needs. Documents therapy and results as required by hospital, department and regulatory agencies.

Charlotte, NC 28245 • (37.9 miles) • Full Time • 11/1/2026

What We Offer: Nuclear Medicine Technologist - Novant Health Schedule: Various locations and schedules (Full-time or PRN) available including: Ballantyne Medical Center Huntersville Medical Center Matthews Medical Center Mint Hill Medical Center Presbyterian Medical Center Rowan Medical Center Greater Charlotte PRN Float Pool Step into a vital role where your imaging skills make a life-saving difference! Novant Health is seeking a Nuclear Medicine Technologist to join our REMARKABLE acute care team. Why Choose Novant Health? Advanced imaging technology & cutting-edge equipment Collaborative and supportive clinical environment Opportunities for professional growth and development Comprehensive benefits and competitive compensation What We're Looking For: Graduate of ARRT-approved or NMTCB-r

Mooresville, NC 28117 • (42.4 miles) • Full Time • 11/1/2026

Do your Best Work in Mooresville This position is based at our headquarters in Mooresville, North Carolina. Our corporate office is a space where you can collaborate and do your best work. Take a walk, grab a bite (or a cup of coffee), work out or get a check-up – we invest in you so you can find your inspiration. Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at any time. What You Will Do The Principal Industrial Engineer is responsible for identifying, analyzing, securing resources and support, and developing solutions that will facilitate continuous productivity, capacity, safety, and quality improvement within Lowe's Supply Chain and Distribution teams. Within distribution, the Principal Industr

Charlotte, NC 28202 • (37.9 miles) • Full Time • $30.21 / hr • 10/18/2026

Cargill is a family company committed to providing food and agricultural solutions to nourish the world in a safe, responsible, and sustainable way. We sit at the heart of the supply chain, partnering with producers and customers to source, make and deliver products that are vital for living. By providing customers with life’s essentials, we enable businesses to grow, communities to prosper, and consumers to live well. This position is in our Food Enterprise where we are committed to serving food manufacturers, food service customers, and retailers with a complete range of innovative ingredients and branded products. Our portfolio includes poultry, beef, egg, alternative protein, salt, oils, starches, sweeteners, cocoa and chocolate. Job Type: Full Time Shift Available: 12 hours shif

Charlotte, NC 28245 • (37.9 miles) • Full Time • 10/27/2026

Req ID: 395526 NTT DATA strives to hire exceptional, innovative and passionate individuals who want to grow with us. If you want to be part of an inclusive, adaptable, and forward-thinking organization, apply now. We are currently seeking a Senior Ontologist (Lending Domain / Snowflake / AWS) to join our team in Charlotte , North Carolina (US-NC) , United States (US) . Day-to-Day Job Duties: (What this person will do on a daily/weekly basis) Design, develop, and maintain business ontologies and semantic models for US lending products, processes, and enterprise data assets. Define business concepts, entities, relationships, taxonomies, and metadata standards across commercial, wholesale, consumer, mortgage, and credit lending. Model the end-to-end lending lifecycle, including loan originati

Charlotte, NC 28262 • (31.1 miles) • Full Time • 11/1/2026

Description Looking for an opportunity to make an impact? At Leidos, we deliver innovative solutions through the efforts of our diverse and talented people who are dedicated to our customers’ success. Everything we do is built on a commitment to do the right thing for our customers, our people, and our community. Our Mission, Vision, and Values guide the way we do business. Your greatest work is ahead! We’re seeking a Lead Substation Physical Engineer to take a key role in delivering high impact substation physical design projects. You’ll work on utility systems ranging from 12 kV to 500 kV, contributing to major grid modernization efforts and supporting how renewable generation connects to the grid. In this role, you’ll apply your expertise in digital logic design

Charlotte, NC 28245 • (37.9 miles) • Full Time • 10/18/2026

Johnson Controls, a global leader in thermal management, mission-critical building systems, energy efficiency, and decarbonization, helps customers use energy more productively, reduce carbon emissions, and operate with the precision and resilience required in rapidly expanding industries such as data centers, healthcare, pharmaceuticals, advanced manufacturing, and higher education. For more than 140 years, Johnson Controls has delivered performance where it really matters. Backed by advanced technology, lifecycle services and an industry-leading field organization, we elevate customer performance, turn goals into real-world results and help move society forward. What you will do Perform service and repairs on Portable Fire Extinguishers, Kitchen Hood Systems & Suppression Gas Systems in

Charlotte, NC 28245 • (37.9 miles) • Full Time • 10/21/2026

Project Manager, NCDOT Heavy Civil Charlotte, NC (Onsite, projects across central NC) Run NCDOT roadway, bridge, and utility jobs start to finish for a self-perform contractor with backlog already won and a direct line to senior leadership. Must-Haves 5+ years as Project Manager of record on heavy civil, highway, bridge, or utility work Documented NCDOT project experience as the PM You've already run projects in their entirety (not a step up for APMs or Project Engineers) Contractor-side background, not consultant, design, or inspection only Strong on cost control, schedules, change orders, and field teams What You'll Do Own budget, schedule, forecasting, and margin from preconstruction through closeout Lead superintendents, field engineers, and subcontractors Serve as main contact for NCD

Charlotte, NC • (37.5 miles) • Full Time • 11/3/2026

Electrical Engineer Position Overview We are seeking a results-oriented Electrical Engineer (Products) to design, develop, and deliver electromechanical products from concept through production. The role focuses on electrical design, system integration, testing and validation, and cross-functional collaboration to create reliable, manufacturable products that meet performance, cost, and regulatory requirements. The right candidate will have experience in either Industrial, Automation, or Manufacturing environments. Apply today and see why we've been named a Top Workplace by USA Today! Key Responsibilities Lead electrical design for new product development including schematic capture, component selection, and PCB layout reviews. Develop and validate electromechanical system designs, ensurin

Charlotte, NC 28201 • (37.6 miles) • Full Time • 11/3/2026

BLEW & Associates is seeking an experienced Professional Engineer to lead the growth of our civil engineering and land development practice in an assigned market. This position offers the opportunity to build a local practice with the support of a national firm providing engineering, land surveying, environmental assessment, zoning, and construction services. The Market Leader will develop client relationships, secure profitable work, guide project delivery, and build a strong engineering team. Requirements Responsibilities Develop and execute a market growth plan focused on clients and project types that fit BLEW’s capabilities. Generate new engineering opportunities through established relationships, direct outreach, industry involvement, and collaboration with BLEW’s business developmen

Concord, NC • (25.2 miles) • Full Time • 11/3/2026

Company Description Turner & Townsend is a global professional services company with over 22,000 people in more than 60 countries. Working with our clients across real estate, infrastructure, energy and natural resources, we transform together delivering outcomes that improve people’s lives. Working in partnership makes it possible to deliver the world’s most impactful projects and programs as we turn challenge into opportunity and complexity into success. Our capabilities include program, project, cost, asset and commercial management, controls and performance, procurement and supply chain, net zero and digital solutions. We are majority-owned by CBRE Group, Inc., the world’s largest commercial real estate services and investment firm, with our partners holding a significant minority inte

Harrisburg, NC 28075 • (25.6 miles) • Full Time • 11/3/2026

Description: As a Sr. Structural Engineer, you will have the opportunity to work on a wide variety of engineering projects and design elements. This individual will have the avenue to gain knowledge, experience, and grow their career. Candidate should be self-motivated and willing to be challenged in engaging and meaningful work. The right candidate is a degreed engineer with a structural engineering emphasis. Design experience in industrial and/or bridge projects is a plus. Duties will include preparation of design drawings, specifications, and reports, as well as generating studies and cost estimates. Successful candidates should have knowledge in designing structures using applicable codes (IBC, ASCE-7, AASHTO), and well as material design codes (AISC, ACI concrete, ACI masonry, etc.).

Matthews, NC 28105 • (33.7 miles) • Full Time • 11/3/2026

We are representing a multidisciplinary Construction Engineering firm spanning Civil, Architectural, Environmental, Surveying, and Field Services that is seeking a Project Engineer with Aviation project experience in NC. Bachelor's degree in Civil Engineering from an ABET-accredited university 3-5 years of relevant experience in land development, aviation, or related fields PE license preferred, or ability to obtain within a reasonable timeframe Proficiency in Autodesk Civil 3D and related design software; FAA design standards experience a plus Strong written and verbal communication skills and the ability to manage multiple projects

Mooresville, NC 28115 • (36.2 miles) • Full Time • 11/3/2026

Job Description Porsche Penske Motorsport is seeking a qualified Systems Engineer to join our IMSA racing program. This position will be a key member of the traveling race team, responsible for supporting the electronic, data, control, and communication systems of the race cars. The Systems Engineer will work closely with race engineering, IT, and other technical personnel to ensure vehicle systems are properly configured, maintained, and supported both at the shop and at test and race events. This position is based in Mooresville, North Carolina and requires extensive travel throughout the IMSA season, including periods of up to 2–3 weeks away from the home base. Responsibilities Responsible for the development, setup, systems integration, maintenance, wiring, and functionality of all dat

Charlotte, NC • (37.5 miles) • Full Time • 11/3/2026

Tube Laser Operator Pay: Up to $28.00/Hour to Start Based on Experience Position Summary We are seeking a detail-oriented Tube Laser Operator to join our manufacturing team. This role is ideal for experienced machine operators who understand production processes, blueprint reading, quality inspection, and precision measurements. Direct tube laser experience is not required. Candidates with experience operating CNC machines, saws, fabrication equipment, or other industrial machinery are encouraged to apply. The ideal candidate has strong mechanical aptitude, experience working with calipers and micrometers, and a commitment to producing high-quality work in a safe manufacturing environment. Responsibilities Set up and operate tube laser cutting equipment and other production machinery. Read

Charlotte, NC • (37.5 miles) • Full Time • 11/3/2026

Lead Manufacturing Innovation in Advanced Chiller Systems Location: Charlotte, NC | Payrate: $54.04/hour | Schedule: Multiple shifts available PDS Tech Commercial is partnering with a leader in the HVAC Manufacturing Industry to find a Manufacturing Engineer ready to solve complex challenges, optimize production, and help shape the future of advanced air-cooled chiller manufacturing. If you’re an engineer who thrives at the intersection of mechanical systems, electrical integration, controls, and manufacturing excellence , this is an opportunity to make a measurable impact on products, processes, and production performance. The Opportunity As a Senior Manufacturing Engineer , you’ll serve as a primary technical resource for air-cooled chiller manufacturing operations. You’ll tackle complex

Charlotte, NC • (37.5 miles) • Full Time • $100,000 to $130,000 / yr • 11/3/2026

Applicants must currently live in the United States and be legally authorized to work in the U.S. without sponsorship. We do not sponsor visas. Location: This is a full-time, direct-hire, on-site position in Glendale, AZ. Relocation assistance is offered, so candidates anywhere in the U.S. who are willing to relocate to the Phoenix/Glendale area are encouraged to apply. About the role: You will work on-site in the plant on high-speed beverage filling and packaging lines, programming and troubleshooting Allen-Bradley PLCs on running production equipment. This is a plant-floor controls engineering role, not a software, QA, or test-automation role. PLC Controls Engineer – Day Shift Schedule: 2-2-3 rotation, 6:00 AM–6:00 PM (Day shift, 12-hour shifts) Base Salary: $100,000–$130,000 Annual Bonu

Charlotte, NC 28201 • (37.6 miles) • Full Time • $50.00 to $60.00 / hr • 11/3/2026

Description -Management of Azure Endpoint Manager environment. -Management of Azure Intune MDM environment. -Proactively keep up to date with Azure Virtual Device updates and best practices. -Ideally proficient with Nerdio AVD Enterprise management. -Refresh laptop/desktop and AVD images on regular bases. -Work with other departments in the creation of AVD Desktops that fit their needs. -Trouble shoot desktop and AVD issues that are escalated from the Service Desk Support team. -Work assigned service tickets. -Keep up to date on windows operating systems. Skills Windows, System administrator, Systems engineering, Active directory, Powershell, Azure AVD, Entra, Intune, Nerdio Top Skills Details -7+ years of experience working desktop management systems. - Deploying, maintaining, and expandi

Charlotte, NC 28202 • (37.9 miles) • Full Time • $56.00 to $61.00 / hr • 11/3/2026

Pay Range: $56.59hr - $61.59hr Job Overview: This experienced engineering contractor will independently collaborate with organization stakeholders and cross-functional teams to develop and implement risk-informed tools and processes that enhance nuclear safety, operational decision-making, and regulatory compliance. The role requires advanced system and/or design engineering expertise, sound judgment, and delivery of high-quality work with minimal supervision and rework. Responsibilities: Develop technical bases and supporting documentation in support of 10 CFR 50.69 categorizations, Surveillance Test Risk-Informed Documented Evaluation (STRIDE in the Surveillance Frequency Control Program), and Risk Informed Completion Times. Research and provide reference documentation to third parties.

Charlotte, NC 28208 • (41.3 miles) • Full Time • $26.00 to $35.00 / hr • 11/3/2026

Who Is Tri-Lift Industries? Tri-Lift Industries, Inc. is a third generation family business seeking qualified individuals to be part of our growing team. As the leader in material handling equipment and solutions, we represent CLARK, BYD, and Liugong forklifts as well as aerial equipment and solutions, covering North Carolina, South Carolina and Virginia. Our vision and mission is to be THE trusted long-term material handlings partner in the market by delivering proven industry leading products and services designed to enhance our customers business. We stand by our core values that provide passion, professionalism, integrity and team work. We are a large company still small enough to care. Tri-Lift Industries provides opportunities and offers continuous paid training, wages that are flexi

Charlotte, NC • (37.5 miles) • Full Time • 11/2/2026

Geo-Technology Associates, Inc. (GTA) is seeking a Senior Engineering Technician for work in Charlotte, North Carolina. Candidates should possess 2-5 years of relevant testing experience and have one (preferably more) of the certifications listed below. NICET Level I, II, III or IV (Geotechnical Engineering Technology Construction) NICET Level I,II, III, or IV (Soils Certificate in Construction Materials Testing) AWS or CWI American Society of Non-Destructive Testing (ASNT) Level II or III ICC Certifications (Soils, Masonry, Fireproofing,Welding, Bolting, Reinforced Concrete, etc.) ACI Certified Construction Special Inspector (CCS), ACI CCS, ACI Concrete Field Testing Technician Grade I, ACI/CRSI Certificate for Adhesive Anchor Installation Senior Engineering TechnicianResponsibilities Inc

Charlotte, NC 28208 • (41.3 miles) • Full Time • 11/2/2026

Description: Geo-Hydro Engineers provides site development engineering and environmental consulting services for major developers. Our employees enjoy competitive pay, excellent benefits, growth opportunities, gain valuable hands-on experience and certifications, participate in innovative solutions and robust training and have the opportunity to make Geo-Hydro a part of their long-term career! We are seeking motivated and dependable Engineering Technician Aides to join our team, providing essential support for civil engineering consulting and testing services. This hands-on role involves field and laboratory testing of construction materialsincluding soil, concrete, and masonryin accordance with ASTM standards. Technicians are responsible for observing construction activities for complianc

Charlotte, NC 28269 • (34.5 miles) • Full Time • 11/2/2026

Location Type: Equipment Provider Product: Furnace and Finishing Equipment Compensation Range : $180K+ 15+ years of experience in metal stamping or related manufacturing industries. 7+ years of senior leadership experience with full P&L responsibility. Strong background in manufacturing operations, cost control, and profitability improvement. Proven success in commercial growth, business development, and customer relationships. Experience serving automotive, Tier 1 suppliers, appliance manufacturers, or industrial OEMs. Bachelor's degree in Engineering; MBA preferred. Strong leadership, strategic planning, and business acumen required.

Charlotte, NC 28206 • (36.2 miles) • Part Time • 11/2/2026

Bolton & Menk has an exciting opportunity for a Survey Field Technician to join our team in Charlotte, NC! As a Top Workplace, this is a fantastic chance to work with a talented team of professionals and make a lasting impact on the communities we serve. With over 75 years of experience, Bolton & Menk specializes in providing community infrastructure solutions across the Midwest, Southeast, and beyond. We are looking to add a Survey Field Technician who will help foster our mission that All People Should Live in Safe, Sustainable and Beautiful Communities! This role will be responsible for assisting with the planning and organizing of survey field activities. Survey work will include construction staking, boundary location, ALTA, and topography for various project types. This role will als

Charlotte, NC • (37.5 miles) • Full Time • 11/2/2026

ELECTRICAL ENGINEER - SENIOR P osition Summary: Supports daily electrical project management, client interface, and provides direction to electrical engineers, designers, and production staff on the production of on time and quality-controlled project specific electrical deliverables. Basic Duties: · Will support daily electrical engineering and design for industrial projects, provide direction to project team on the production of time and quality-controlled project specific electrical deliverables. · Electrical conceptual and detailed designs, methods and materials specifications, electrical equipment application. · NEC compliance, building code compliance, feasibility studies, adherence to budgets and schedules, cost estimating, field survey, construction administration · Support of proc

Charlotte, NC • (37.5 miles) • Full Time • $50,000 / yr • 11/2/2026

Dependable and detail-oriented maintenance professional with hands-on experience in building repairs, preventative maintenance, and facility upkeep. Skilled in troubleshooting electrical, plumbing, and HVAC systems to ensure a safe and comfortable environment for guests and staff. Committed to responding quickly to maintenance requests, completing work efficiently, and maintaining high hospitality standards. Known for strong work ethic, teamwork, and dedication to keeping hotel operations running smoothly. Is willing to learn and works well in a team.

Charlotte, NC • (37.5 miles) • Full Time • 11/2/2026

Description: On-site in Charlotte, NC Our client is seeking a skilled Network / Wireless Engineer to support the operation, maintenance, troubleshooting, and deployment of enterprise wired, wireless, and cellular network infrastructure. The role will support network switches, wireless access points, network access control, mobile routers, monitoring platforms, and day-to-day network operations across multiple locations. The ideal candidate will have strong technical knowledge, hands-on troubleshooting experience, and the ability to work collaboratively with internal teams, vendors, and business units. Due to client requirements, applicants must be willing and able to work on a w2 basis. For our w2 consultants, we offer a great benefits package that includes Medical, Dental, and Vision bene

Mooresville, NC 28117 • (42.4 miles) • Full Time • 11/2/2026

Corvid Technologies has multiple opportunities for students pursuing undergraduate and graduate Aerospace Engineering degrees to work with our team to analyze, develop, design, manufacture and test next-generation products for Government and Commercial customers. Aerospace Engineers (and similar STEM degree seeking) students can work within many areas across Corvid, with sample tasking ranging from developing and analyzing aerothermal properties for hypersonic systems to building guided missiles used to test missile defense systems. Our teams also support CFD and Multiphysics analysis for aerospace systems, including analyzing and predicting flight performance and safety boundaries for test events. At Corvid, our engineers work on challenging, technical tasks, and our interns work alongsid

Charlotte, NC 28262 • (31.1 miles) • Full Time • 11/2/2026

Job Summary: To implement the processes by which projects are started up, sequenced, commissioned, turned over, and warrantied. To train customer facilities personnel in the proper operation and maintenance of installed systems and equipment and provide response and support for warranty requests. Responsibilities: LEADERSHIP Ability to lead crew in the direction most productive for the timely completion of the job while following the project commissioning process. Motivate the crew to the highest level. DOCUMENTATION Completes startup forms for equipment as required. Works with factory startup technicians and obtains forms as required. Keeps file in a concise, orderly manner. Documents all job-related occurrences. Keeps a daily record. Uses Autodesk Build for QC/QA processes. Qualification

Matthews, NC 28105 • (33.7 miles) • Full Time • $45.00 to $60.00 / hr • 11/2/2026

Job Title: Civil Engineer Position Summary Pay Rate - $45-$60/hour Adidev is seeking a motivated and detail-oriented Civil Engineer to plan, design, and oversee a wide range of infrastructure and civil works projects including transportation systems, bridges, buildings, site development, utilities, and water/wastewater facilities. This role blends office-based design and analysis with hands-on field oversight, offering the opportunity to see projects through from concept to completion while ensuring quality, safety, sustainability, and regulatory compliance. You will collaborate with multidisciplinary engineering teams, public agencies, and contractors to deliver reliable infrastructure that serves communities and supports long-term growth. About Adidev Adidev Technologies is an engineerin

Charlotte, NC 28206 • (36.2 miles) • Full Time • 11/2/2026

WB Moore is a privately owned electrical leader based in Charlotte, NC, known for dynamic, multistate ELECTRICAL PROJECTS driven by advanced technology and innovative design. We deliver effective solutionsto our customerswhile investing in our people’s growth. WB Moore partners with WBM Group, PLLC to provide those design services in MEP engineering and consulting throughout various industry sectors.The targeted position is focused on supporting WBM Group, PLLC operations, and the engineering projects acquired. The WB Moore Company seeks an experienced Electrical Designer to support operations in the Charlotte, NC market. Description: The electrical designer reports to a senior electrical designer or engineer and is responsible for electrical design and the developing and maintaining of co

Charlotte, NC • (37.5 miles) • Full Time • $55.00 to $58.00 / hr • 11/2/2026

Title: System Admin/Engineer Location: Charlotte, NC (Onsite) Duration: 12 Months Responsible for matching current technology with the current needs. As part of this task, engages in the evaluation and installation of software, hardware, and other types of support equipment into a workable network that supports a variety of functions.This person has fundamental knowledge of Systems Engineering infrastructure. Includes individuals performing high-level systems support. Responsibilities include providing problem determination and resolution, install and update newly developed software to assigned systems. Responsible for the operating system and associated subsystems including system and application patching and security configuration. Provide system-level support of multi-user operating sys

Charlotte, NC 28203 • (39 miles) • Full Time • 11/2/2026

Company Mission Statement: To build up our communities, our clients, and each other by building trust in everything we do. Learn more about Harper: https://vimeo.com/242609377 Summary/Objective: Promotes the company mission statement by joining the Project Manager and Superintendent as a team who work together to create a safe work environment, build a quality project, keep projects on schedule while earning a fair and reasonable profit. Essential Functions: Understand, support, and adhere to Harper safety and quality requirements. Observe and correct violations as they arise on project sites. Purchase materials and equipment with safety and quality in mind. Assist Project Manager with daily project duties. Expedite material procurement, approval, and delivery as necessary to promote accur

Charlotte, NC 28216 • (39.4 miles) • Full Time • $75 to $100,000 / yr • 11/2/2026

We are looking for a Cabinet Vision Programmer. Candidate must be proficient in design. Looking for at least 5 years' experience. Millwork/Commercial experience. Custom side of Cabinet Vision. Office is located in Gastonia NC AlphaCam Router - Advanced + Automation Manager Plus for MDF Doors

Pineville, NC 28134 • (43.9 miles) • Full Time • 11/2/2026

Description: COMPANY OVERVIEW Artisan Design Group (ADG), a Lowe's company, is a leading national provider of interior finishings solutions for homebuilders and property management clients. ADG delivers end-to-end design, procurement, and installation services for flooring, cabinets, countertops, and a growing portfolio of interior products. Founded in 2016, ADG has grown by uniting respected regional operators across the country. Following its 2025 acquisition by Lowe's Companies, Inc., the company continues to operate as ADG while benefiting from the scale, resources, and brand strength of one of the most trusted names in home improvement. Together, they are expanding their capabilities in a highly fragmented market while remaining committed to craftsmanship, service, and local expertise

Charlotte, NC 28262 • (31.1 miles) • Full Time • 11/2/2026

Senior Site Reliability Engineer (SRE) – PagerDuty / Moogsoft Migration Position Overview Lead a critical observability and incident-management transformation by migrating from the legacy Moogsoft AIOps platform to PagerDuty. This role focuses on redesigning incident management workflows, implementing event orchestration, integrating monitoring platforms, and enabling a seamless transition to PagerDuty for live production monitoring. What You'll Do / Key Responsibilities Lead the migration from Moogsoft and implement PagerDuty as the primary incident intelligence and alerting platform. Connect existing monitoring tools, including Datadog, New Relic, Splunk, and AWS CloudWatch , directly into PagerDuty. Configure PagerDuty Event Orchestration, deduplication rules, and alert suppression to m

Charlotte, NC • (37.5 miles) • Full Time • $65.00 to $65.05 / hr • 11/2/2026

Job Title: Senior Mobile Automation Engineer - Perfecto / Appium Location: Charlotte, NC Duration: Contract - 12 months Pay Range: $65.05/hr (W2) Job ID: 411026 About BCforward BCforward is a leading global IT consulting and workforce solutions firm providing services and support to Fortune 500 and government clients. Founded in 1998, BCforward has grown with our customers needs into a full-service business solutions provider. With delivery centers and offices across North America and India, we take pride in building long-term relationships and delivering excellence through innovation, collaboration, and integrity. Job Description We are seeking a Senior Mobile Automation Engineer - Perfecto / Appium to join our dynamic team. The ideal candidate will have strong experience in mobile test a

Charlotte, NC • (37.5 miles) • Full Time • $40.00 to $50.00 / hr • 11/2/2026

A leading industrial machinery manufacturer is seeking multiple Field Service Technicians to support customers across North America. These positions are responsible for the installation, maintenance, troubleshooting, repair, and startup of advanced CNC machine tools in manufacturing environments. This role is ideal for individuals with CNC machining, machine tool, automation, electro-mechanical, or OEM service experience who enjoy hands-on technical work, travel, and problem solving in fast-paced production environments. Install and commission CNC machine tools at customer facilities Perform troubleshooting, diagnostics, and repair activities on mechanical, electrical, hydraulic, and control systems Respond to machine downtime events and provide break/fix support to restore production equi

Charlotte, NC • (37.5 miles) • Full Time • $148,512 to $214,517 / yr • 11/2/2026

Senior Lead Network Engineer II Employment Type: Full Time Department: Information Technology CGS is seeking an experienced Senior Lead Network Engineer to join a team focused on the evaluation, enhancement, and maintenance of a large-scale network project that includes both wired and wireless network infrastructure and related hardware & software. The project's objectives are to evaluate the current setup of existing disparate networks and design & implement a network infrastructure that encompasses the wireless, wired, and software network requirements. The project will also include consultation regarding hardware and software necessary to facilitate the proper support for this encompassing infrastructure, and the associated systems testing, vulnerability assessments, and quality assuran

Charlotte, NC • (37.5 miles) • Full Time • $90,000 to $104,000 / yr • 11/2/2026

The Exterior Systems and Lighting Team within Scout is a very exciting and dynamic group to be a part of. Our team works on components you see on the exterior of the car. In this role, you will specifically be working on exterior Bumper components.

Concord, NC • (25.2 miles) • Full Time • 11/1/2026

Hotel : Concord Embassy Suites5400 John Q. Hammons Dr. NWConcord, NC 28026 Chief Maintenance EngineerFull timeCompensation Range : $105,000- $120,000 Compensation is determined based on a variety of factors, including experience, skills, qualifications, and the specific location of the role. Actual pay may differ depending on these factors. What’s in it for you? The Atrium SPIRIT is a belief in the power of Service , Perseverance , Inclusion , Respect , Innovation , and Teamwork to create an environment where everyone thrives. We go above and beyond to deliver exceptional guest experiences, work together to overcome challenges, and are passionate about positively impacting those around us. Career Growth & Learning – 40% of our management hires are internal promotions! Invest in Your Future