West Point, MS 39773 • (42.2 miles) • Full Time • $90,000 to $100,000 / yr • 10/31/2026

Job Summary Electronics manufacturing engineer that will assist with new product launch in our electronics assembly department. The candidate should have experience with IPC Standards, product testing, and BOE creation for circuit card assemblies and wire harnesses. Job Responsibilities Assist with basis of estimate creation by providing manufacturing flow times according to contractual requirements. Develop technical documentation, including work instructions and engineering drawings to support manufacturing operations. Assist in the development of jigs, fixtures, and manufacturing aids. Assist in the development of electronics manufacturing processes that adhere to ISO 9001 certification standards such as ESD, FOD, and material storage procedures. Optimize assembly line layouts to maximi

Oxford, MS • (30.2 miles) • Full Time • 10/31/2026

Sheet metal duct mechanics for Long term project in Oxford MS Applicants should have a minimum of two solid years working with sheet metal duct. Confident installers needed. Project starts July 13th - long term project till mid 2027 Negative Drug screen required E-Verify participating employer (Must be legal to work in the USA with Valid IDs) Able to communicate in English Applicants should have PPE (hard hat, reflective vest, safety glasses, gloves and boots) as well as transportation of their own.

Center, MS • (39.6 miles) • Full Time • 10/31/2026

ABOUT ROCKET LAB Rocket Lab is the end-to-end space company building rockets, spacecraft, and critical subsystems that keep the world connected, protected, expand humanity's reach to the Moon, Mars, and beyond. We move fast, build real hardware for meaningful missions, and make the impossible routine. Come shape the future with us. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. GSE MECHANICAL TECHNICIAN II Based out of Rocket Lab's Test Facility at Stennis Space Center in Mississippi, the GSE Mechan

Water Valley, MS • (23.4 miles) • Full Time • 10/30/2026

Job Title: HVAC Controls Technician Job Description This role focuses on operating, maintaining, troubleshooting, and repairing a wide range of building control and mechanical systems, including digital and pneumatic HVAC controls, automatic/ADA door systems, sound systems, generators, and clock/time clock equipment in a schooling environment. The technician ensures reliable building operations by diagnosing complex control issues, performing precise calibrations, and supporting automated systems that manage airflow, ventilation, and comfort. Responsibilities Operate and maintain building automated control systems to ensure reliable and efficient operation of HVAC and related equipment. Install wiring associated with building control systems, including line and low voltage wiring for digit

Center, MS • (39.6 miles) • Full Time • 10/30/2026

At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. OurTerran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launchcapacity. But that's just the start. Achieving commercial success with Terran R will unlock newopportunities to advance science, exploration, and innovation, pioneering progress that reaches beyondthe known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across t

Batesville, MS • (43.3 miles) • Full Time • 10/30/2026

We are looking for a Ford Certified Service Technician to join our growing team! The right candidate will have a strong service technician background and ASE & Ford certified. The day-to-day duties include performing work on specific repair orders and diagnosing what repairs need to be done. By working at a Ford dealership, you can be a part of a brand that honors the past, and is invested in the future. Join the Ford Family where we value service to each other and the world as much as to our customers! Benefits: Health, Medical and Dental 401K Plan Paid time off and vacation Growth opportunities Employee vehicle purchase plans Family owned and operated Long term job security Responsibilities Perform work specified on the repair order with efficiency and in accordance with dealership Test-

Batesville, MS 38606 • (44.5 miles) • Full Time • 10/30/2026

Who We Are: From Georgia. For Georgia. Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest assetour employees. What You Will Be Doing: As the Plant Manager, you will be responsible for all operations and activities of Yancey Engineered Solutions, including production, engineering, quality and sales, and all ancillary functions. Primary Responsibilities: Leads and directs the work of other employees and has responsibility for

Shannon, MS 38868 • (32.6 miles) • Full Time • $38.00 to $50.00 / hr • 10/30/2026

Job Title: Quality Engineer Job Description The Quality Engineer plays a key role in ensuring that automotive interior components, specifically center consoles made from plastics and metal, meet stringent customer and industry quality standards. This position serves as the primary quality liaison to customers, overseeing qualification of new parts, maintaining compliance with automotive quality standards, and driving continuous improvement through data-driven analysis and robust documentation. Responsibilities Represent the manufacturing facility to designated automotive customers as the primary quality contact, building strong, professional relationships. Ensure all delivered parts meet customer specifications and are free from defects through rigorous quality control and validation proce

Bruce, MS 38915 • (6.8 miles) • Full Time • $14.00 to $15.00 / hr • 10/29/2026

Salary: $14 - 15 per hour + none Reference: 1178436-5 Are you a skilled assembler or assembly technician looking for rewarding work with the benefit of consistent pay? Join our network where your precision and expertise are valued. We offer flexible shifts and short-term mandates in light manufacturing, allowing you to choose work that fits your schedule while applying your technical skills to high-quality component assembly. Your responsibilities: - Precision assembly: perform complex or repetitive assembly tasks of components or products following detailed schematics, blueprints, or work instructions. - Tool use: safely utilize various hand tools, power tools, fixtures, and specialized equipment (e.g., soldering irons, crimpers, torque wrenches) as required by the assembly process. - Qua

Starkville, MS • (44.3 miles) • Full Time • 10/28/2026

Electrical Controls Engineer Location: Starkville, MS TalentBridge is supporting a well-established manufacturing company in the search for an Electrical Engineer II to join its engineering team at a manufacturing facility in Starkville, MS. This is a hands-on engineering role focused on PLC programming, machine controls, electrical troubleshooting, control system design, and commissioning. The engineer will work closely with manufacturing and engineering teams to improve equipment reliability, efficiency, and quality. Key Responsibilities Troubleshoot and resolve malfunctions with machine control systems Develop and modify PLC and HMI applications Program and troubleshoot ladder logic Work with Siemens and Rockwell/Allen-Bradley PLCs Support setup and commissioning of new systems and equi

New Albany, MS • (38.7 miles) • Full Time • 10/27/2026

With over 80 years in the transportation industry and recognized as a 2-time TCA Elite Fleet, Marten Transport knows what it takes to be among the best. Behind that success is a dedicated maintenance team that keeps our equipment running safely, efficiently, and reliably. We're looking for skilled reefer technicians to join our team and keep our award-winning fleet moving! Why Work for Marten Transport? Overtime opportunities available (varies by location) Comprehensive Benefits Package: Medical, dental and vision insurance 401(k) with company match – available after just 90 days! 40 hours of PTO to start Annual tool allowance Annual boot allowance Prescription safety glasses program Company-provided uniforms and laundry service Jacket program Training & development opportunities – continu

New Albany, MS • (38.7 miles) • Full Time • 10/25/2026

The Lumber Manufactory (TLM) is building the future of sustainable lumber with next-generation sawmill technology. We design and operate state-of-the-art modular sawmills that produce high-grade dimensional wood products with greater efficiency and less waste. Backed by leading investors including Cantos, Slow Ventures, Banter Capital, Humba Ventures, and Ravelin Capital. We're hiring Machine Operators to run the saws, conveyors, and sorting equipment that turn logs into lumber at our New Albany mill. If you like running equipment and figuring out why something isn't working right, this is a good fit. Experience helps, but we train the right people. What you'll do Operate sawmill machinery, including saws, conveyors, and sorting systems Feed and align logs, and adjust settings to keep prod

Shannon, MS • (35.4 miles) • Full Time • 10/23/2026

Position: Sewing Quality Control Pay: $15.00/hour Shift: Monday-Friday, 7:00 AM-2:30 PM Location: Tupelo, MS Integrity Trade Services is hiring a Sewing Quality Control to start IMMEDIATELY at $15.00/hour. Receive comprehensive benefits through ITS upon hire! Responsibilities Inspect garments and products for defects such as loose threads, missed seams, and uneven stitching Follow work orders and specifications to maintain consistent stitch quality Ensure all items are correctly measured, aligned, and assembled Perform quality checks on finished products Maintain a clean and safe work environment while meeting daily production goals Qualifications Sewing experience preferred (industrial, garment, or manufacturing) Ability to stand for long periods and perform repetitive hand motions Strong

West Point, MS 39773 • (42.2 miles) • Full Time • $25 to $26 / wk • 10/23/2026

NOW HIRING – Industrial Fab Shop Electrician Location: West Point, MS Pay: $23.00 - $26.00 per hour (based on experience) Schedule: Full-Time | Overtime Available We are seeking a skilled Industrial Fab Shop Electrician to support the fabrication, assembly, wiring, and testing of industrial electrical systems and control panels. This position is ideal for electricians with experience in industrial manufacturing, automation, control panel fabrication, and equipment integration. Job Responsibilities Assemble and wire industrial control panels and electrical enclosures Install and terminate power, control, and instrumentation wiring Read and interpret electrical schematics, blueprints, and wiring diagrams Install electrical components including relays, PLCs, VFDs, disconnects, and terminal bl

Tupelo, MS 38801 • (33.9 miles) • Full Time • 10/23/2026

Do you want to be part of a team that aspires to improve the quality of life for others? Are you interested in efficient manufacturing processes that promote sustainability? Do you feel a sense of accomplishment in a job well done? At Carpenter Co., we challenge our employees to learn from and inspire one another – all levels of the company collaborate, communicate, and constantly improve to achieve shared success. If that sounds like an environment in which you will thrive, Carpenter Co. could be a great fit for you! Carpenter Co. has an immediate opening for a 1st Shift Operator A - Gluer Furniture MFG at our Tupelo/Verona, MS manufacturing plant. This position is responsible for the safe operation of a specific piece of equipment used in the manufacture of components and/or finished pro

Starkville, MS • (44.3 miles) • Full Time • 10/21/2026

Camgian is hiring a Senior QA Software Engineer to join our team in Starkville, MS . This is a hands-on technical leadership role reporting to Camgian's Quality Assurance Director. You will lead the design, implementation, and execution of manual and automated test strategies for software, firmware, and hardware across Camgian's product lines while remaining active in code, automation, and difficult defect investigations. We are particularly interested in an engineer who built a strong foundation as a software developer and deliberately chose to focus on software quality because they value the investigative, systems-oriented work of testing. You will enter a developing QA organization and will be expected to quickly assess its people, practices, coverage, and tooling; coach team members wh

Oxford, MS • (30.2 miles) • Full Time • 10/19/2026

Senior Mechanical Estimator Job Title: Senior Mechanical Estimator Location: Oxford, MS Salary Rate: $140,000 - $150,000 + bonus I am working with a top mechanical contractor who is looking for a senior mechanical estimator. The estimator should know about various commercial & industrial mechanical systems. If you have 10+ years of mechanical estimating experience, please apply! Key Responsibilities Lead the development of conceptual budgets, detailed estimates, and bid proposals for HVAC, plumbing, and piping scopes. Perform quantity takeoffs, labor analysis, and equipment/material pricing using industry-standard estimating tools. Review drawings, specifications, and project documents to ensure complete and accurate scope coverage. Identify cost-saving opportunities, constructability issu

Verona, MS 38879 • (36.3 miles) • Full Time • 10/19/2026

Reports To: Quality Engineer Department/Group: Quality Travel Required: Minimal Level/Salary Range: US$ 40k – 47k per year Position Type: Full Time Job Description/Summary QTech will support daily production activities by providing immediate hands-on resolution and/or quality functions as required. As a constant present on the production floor, the QTech is a quality first responder, a proactive assessor as well as an excellent communicator. The QTech is the keeper of the Quality System in practical application, consistently assessing compliance and performance. Role and Responsibilities Provide quality assurance support for manufacturing by performing, but not limited to, the following activities: · Ensure established quality process is effectively utilized and address deficiencies in com

Grenada, MS 38901 • (32.8 miles) • Full Time • 10/17/2026

Description: As a Data Center Quality Inspector I, you provide superb quality control services for our clients by performing essential inspections of electrical equipment and systems, including switchgear and substations. Detailed knowledge of mechanical and instrumentation is critical to conduct inspections, interpret electrical drawings and specifications. You ensure the equipment and technicians around you comply with company and site safety requirements. Reporting daily about your findings, including time tracking and special inspection reports will be routine. You will approve and submit important documents such as Lockout/Tagout (LOTO) requests, team reports, and time tracking reports. You take pride in assuring that our clients receive safely installed and functional equipment every

Blue Springs, MS 38828 • (39.2 miles) • Full Time • $16.00 to $16.75 / hr • 10/17/2026

TRIGO Global Quality Solutions has several immediate openings for Quality Inspectors in Blue Spring, MS Pay is $16.00, $16.75 for night shift. Overall Purpose of the Quality Inspector Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports to Site Supervisor/Site Leaders Responsibilities (To include but not limited to the following) Client Relationship & Business Development Act as an impartial third party between the production source and the customer facility to ensure the product meets set criteria Operations Check/inspect manufactured parts or products for defects Read and follow work instructions and general processes Use measuring or testing equipment as needed Ensure products meet

Houston, MS 38851 • (19.2 miles) • Part Time • $11.99 / hr • 10/15/2026

A maintenance helper is responsible for daily cleaning by sweeping and/or blowing sawdust and debris. A helper assist the maintenance staff with routine work and preventative maintenance on equipment. A helper helps improve production efficiency by completing task during non-production hours and performs other duties as assigned by supervisor. Shift is 4:15 pm - 9:15 pm

Shannon, MS 38868 • (32.6 miles) • Full Time • 10/15/2026

Responsible for monitors and/or verifies food safety and quality of products and processes per company guidelines. The QA Tech enforces employee GMPs and safety practices as well as monitors sanitation and the condition of equipment and facility. Also, performs other tasks as necessary to safeguard the interest of the Raybern Quality Foods. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Monitor and/or verify HACCP Plan and CCP’s SQF responsibilities including but not limited to documentation, inspections, auditing, validation and verification of processes, standards, work instructions, SOP’s, specifications, policies and practices Perform quality testing on finished products to ensure compliance to standards, and specifications Monitor equipment and facility sanitation Monito

Grenada, MS • (33 miles) • Full Time • $32.00 to $38.00 / hr • 10/9/2026

For nearly 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid on-site support at supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on demand with greater speed and efficiency than our competitors. We're hiring for an Electromechanical Quality Inspector II position based in Grenada, MS . This is a first shift, as-needed po

Oxford, MS 38655 • (26.9 miles) • Full Time • 10/8/2026

A wellestablished fuel and lubricant operation in the Oxford, MS area is seeking a handson Plant & Warehouse Manager to oversee daily operations, lead a small team, and ensure safe, efficient product handling. This role is ideal for someone who enjoys a mix of physical work, team leadership, customer interaction, sales, and administrative responsibilities. Responsibilities Manage daily plant and warehouse operations, including receiving, storing, and distributing bulk fuel and lubricants Oversee inventory accuracy, product rotation, and documentation Lead and supervise employees, including scheduling, training, and performance support Maintain a safe, clean, and compliant facility Assist customers with orders, product questions, and service needs Support sales efforts by identifying custom

Eupora, MS 39744 • (27.1 miles) • Full Time • 10/7/2026

Responsible for managing the design, planning, directing, and coordinating activities relating to the construction, modification, installation and maintenance of process equipment within value streams by performing the following duties personally or through shop floor leadership. The primary focus of this position is to improve the physical performance and capability of the products produced through metallurgical analyses, raw material selection/optimization, and furnace/heat treat enhancements. ESSENTIAL RESPONSIBILITIES Includes the following (other duties may be assigned): Establishes, verifies, and maintains standard work instructions as they relate to the operation and setup equipment. Researches world class manufacturing practices and coordinates with management, shop floor leadershi

Tupelo, MS 38801 • (33.9 miles) • Full Time • 10/24/2026

Location: Tupelo, MS Compensation: $16.94 - $17.95 per hour DOE + any applicable shift differential pay Shift: Multiple Shifts - Overtime as needed Position SummaryWhile reporting to the Production Shift Supervisor, you will be responsible for packing products in a quick, safe, and efficient manner. Excellent attendance is crucial to the team's success. This role requires a proven ability to perform in a fast-paced manufacturing environment, collaborate across departments, identify defects on the packing line, and maintain a strong commitment to quality and safety standards. You will take pride in your hands-on abilities, analytical thinking, organizational skills, and attention to detail while supporting ThermoSafe’s operational excellence.Key Responsibilities Safety is the #1 priority at

West Point, MS 39773 • (42.2 miles) • Full Time • 10/12/2026

Working at Pizza Hut is about making hungry people happy. It's about being independent and having fun, making new friends and earning extra cash. As a Pizza Hut team member, you can be the smiling face that greets and serves the customers, or a cook who make things happen in the kitchen. Working with us will give you the financial rewards and flexibility to suit your lifestyle. You'll learn new things, get recognized for your efforts and learn skills that last a lifetime. WHAT ARE WE LOOKING FOR? The good news is that your training will teach you everything you need to know to succeed on the job. But there are a few skills you should have from the get-go: You're a fun and friendly person who values customers and takes absolute pride in everything you do. Communication skills are key – you

Center, MS • (39.6 miles) • Part Time • 11/1/2026

At Relativity Space, we're building rockets to serve today's needs and tomorrow's breakthroughs. OurTerran R vehicle will deliver customer payloads to orbit, meeting the growing demand for launchcapacity. But that's just the start. Achieving commercial success with Terran R will unlock newopportunities to advance science, exploration, and innovation, pioneering progress that reaches beyondthe known. Joining Relativity means becoming part of something where autonomy, ownership, and impact exist at every level. Here, you're not just executing tasks; you're solving problems that haven't been solved before, helping develop a rocket, a factory, and a business from the ground up. Whether you're in propulsion, manufacturing, software, avionics, or a corporate function, you'll collaborate across t

West Point, MS 39773 • (42.2 miles) • Full Time • $90,000 to $100,000 / yr • 10/31/2026

Job Summary The Quality Engineer is responsible for driving overall product and process quality within the manufacturing plant while serving as the primary customer interface for quality related matters. This role provides hands on support to production operations, leads root cause investigations, mentors quality team members, and ensures compliance with ISO and MIL requirements. The position requires a strong technical leader who can operate effectively on the plant floor while also managing customer communications and driving measurable quality improvements. Responsibilities Primary point of contact for all customer correspondence relative to quality objectives, quality Provide daily quality support to production operations. Lead 8D investigations and drive corrective and preventive acti

Center, MS • (39.6 miles) • Full Time • 10/29/2026

ABOUT ROCKET LAB Rocket Lab is the end-to-end space company building rockets, spacecraft, and critical subsystems that keep the world connected, protected, expand humanity's reach to the Moon, Mars, and beyond. We move fast, build real hardware for meaningful missions, and make the impossible routine. Come shape the future with us. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. MECHANICAL TECHNICIAN II – B SHIFT Based out of Rocket Lab's Test Facility at Stennis Space Center in Mississippi, the Seni

Oxford, MS • (30.2 miles) • Full Time • 10/28/2026

Aerotek is hiring Automation Controls Engineer Make an Impact Through Innovation, Automation, and Building Technology Are you an experienced controls professional who enjoys solving complex problems and working with advanced building systems? Join a team where you'll play a key role in maintaining and optimizing HVAC, automation, pneumatic controls, generators, and facility systems that keep an entire campus running efficiently. What You'll Do Install, maintain, troubleshoot, and repair building automation and HVAC control systems. Work with digital and pneumatic controls, sensors, valves, actuators, and dampers. Read and interpret electrical schematics, blueprints, and control drawings. Troubleshoot HVAC equipment, generators, automatic doors, and timekeeping systems. Perform system calib

Batesville, MS 38606 • (44.5 miles) • Full Time • 10/25/2026

Who We Are: From Georgia. For Georgia. Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest assetour employees. What You Will Be Doing: As a Quality Control Technician you will be responsible for maintaining the quality of the products produced by the Yancey Engineering Team. Primary Responsibilities: Inspect tanks and enclosures at different phases of production to verify compliance of build Document phase inspections for eac

Shannon, MS 38868 • (32.6 miles) • Full Time • 10/24/2026

SUMMARY : Operate production machinery and troubleshoot when needed. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Responsible for the set up and operation of the machine within accepted safety practices and the allotted time frame. Properly perform necessary setting adjustments. Properly perform film changes and ribbon changes including changeover from one dye to another. Ensure the products have the correct components before packing them. Continuously check the label, seals and date placement throughout the shift to ensure that every package label and date is correct. Fill out and sign all required documentation before each run. Monitor equipment operation to prevent unscheduled downtime. Communicate effectively with Production Supervisors, Production Leads and other Packa

New Albany, MS • (38.7 miles) • Full Time • 10/23/2026

The Lumber Manufactory (TLM) is building the future of sustainable lumber with next-generation sawmill technology. We design and operate state-of-the-art modular sawmills that produce high-grade dimensional wood products with greater efficiency and less waste. Backed by leading investors including Cantos, Slow Ventures, Banter Capital, Humba Ventures, and Ravelin Capital. We're hiring an experienced Millwright to keep the equipment at our New Albany mill running safely and reliably. You'll install, maintain, and repair industrial machinery, working closely with the Mill Manager, Maintenance Lead, and our engineering and production teams to keep downtime to a minimum. What you'll do Troubleshoot and repair conveyors, pumps, compressors, rollers and chains, bearings, and drives Rebuild and r

Bruce, MS 38915 • (6.8 miles) • Full Time • $17.00 to $18.00 / hr • 10/23/2026

Salary: $17 - 18 per hour + none Reference: 1178465-5 Ready for new opportunities as a machine operator helper? Ever worked with machines in industrial settings? Done both? If any of those things are true, you should know that we're hiring people with your skill set today. You'll hone your highly in-demand skill set, be exposed to new areas of the worksite and gain valuable experience in a fast-paced environment. Plus, great weekly pay as well as terrific benefits are included in the offering. Apply today and if you're a qualified candidate, you'll hear back from us shortly. location: Bruce, MS work hours: 06:00 AM - 02:30 PM dress code: Shirts or t-shirts must have sleeves and be without any holes or rips. Pants without any holes or rips. No profane or suggestive texts and images. Closed

Verona, MS 38879 • (36.3 miles) • Full Time • 10/10/2026

Position Overview: The Manufacturing Engineer will work independently and/or in collaboration with others to develop systems, processes, fixtures, and machines that result in the manufacture of high-quality products. Additionally, the ME would be a contributing part of continuous improvement, safety, and other operational initiatives. Main Duties and Responsibilities: Process Design & Improvement Design, develop, and optimize manufacturing processes to improve efficiency, quality, throughput, and safety. Analyze production workflows and implement process improvements using continuous improvement methodologies. Production Support Provide daily engineering support to manufacturing operations, troubleshooting production issues and minimizing downtime. Collaborate with supervisors, maintenance

Blue Springs, MS • (37.8 miles) • Full Time • 10/10/2026

Position: Industrial Cleaner Second Shift Blue Springs, MS Pay: $15.50/hour Shift: 4:00 PM - 12:30 AM (Weekends) Location: Blue Springs, MS Integrity Trade Services is hiring a weekend Industrial Cleaner to start IMMEDIATELY at $15.50/hr. Receive comprehensive benefits through ITS upon hire! Responsibilities Collaborate with supervisor to ensure facility cleanliness Perform cleaning duties throughout the location Lift up to 30 pounds as needed Maintain safety and cleanliness standards Work effectively with team members Qualifications Ability to stand for 8 hours Attention to detail Willing to work weekends (primarily Saturdays) Ability to lift 30 pounds Strong teamwork skills Skills Clean-up and industrial cleaning skills Safety awareness Equipment cleaning familiarity Attention to detail

Houston, MS 38851 • (19.2 miles) • Full Time • $12 to $14 / yr • 10/9/2026

SPRAYS GLUE TO POLY PARTS TOGETHER ACCORDING TO INSTRUCTIONS AND SPECIFICATIONS. Hourly attendance incentive pay $1.38

Tupelo, MS 38801 • (33.9 miles) • Full Time • 10/24/2026

Do you want to be part of a team that aspires to improve the quality of life for others? Are you interested in efficient manufacturing processes that promote sustainability? Do you feel a sense of accomplishment in a job well done? At Carpenter Co., we challenge our employees to learn from and inspire one another – all levels of the company collaborate, communicate, and constantly improve to achieve shared success. If that sounds like an environment in which you will thrive, Carpenter Co. could be a great fit for you! Carpenter Co. has an immediate opening for a 1st Shift Electronic Technician A at our Tupelo/Verona, MS manufacturing plant. This position is responsible for maintaining all building machinery including troubleshooting, repairing, testing, and installing electrical and electr

Center, MS • (39.6 miles) • Full Time • 10/24/2026

ABOUT ROCKET LAB Rocket Lab is the end-to-end space company building rockets, spacecraft, and critical subsystems that keep the world connected, protected, expand humanity's reach to the Moon, Mars, and beyond. We move fast, build real hardware for meaningful missions, and make the impossible routine. Come shape the future with us. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. GROUND SYSTEMS ENGINEER II Based out of Rocket Lab's Test Facility at Stennis Space Center in Mississippi, the Ground Syste

Batesville, MS 38606 • (44.5 miles) • Full Time • 10/23/2026

Who We Are: From Georgia. For Georgia. Since 1914 Yancey Bros. Co. has proudly served as the authorized Caterpillar equipment dealer for Georgia, providing our customers with the highest quality sales, parts and service. From Caterpillar heavy and compact construction equipment to on-highway trucks, we remain committed to learning more about our customers, offering equipment and support to keep up with their changing needs. This all starts with our greatest assetour employees. What You Will Be Doing: As an Assembly Operator, you will be responsible for the assembly of various components to build sound-attenuated and weather-resistive enclosures. Using various tools, you will work with aluminum siding and steel piping, You will also mount heavy to light industrial components. Major Tasks, R