Garretson, SD 57030 • (37.6 miles) • Full Time • 9/16/2026

HR/Scheduling CoordinatorTurn your job into a career with Evergreen Healthcare Group!Job Summary:Palisade Healthcare Centeris looking for aHR/Scheduling Coordinatorto create, maintain and manage nursing staff schedules and provide HR administrative support.Essential Functions:Staffing & Scheduling:Develop, maintain, and post nursing staff schedules at least 2 weeks in advance.Adjust schedules based on staffing needs, census fluctuations, call-ins, new admissions and employee availability.Communicate schedules, shift changes, and time-off approvals to staff in a timely manner.Address any scheduling conflicts or issues that arise.Track attendance and maintain accurate staffing records.Ensure staffing compliance with federal and state regulations and PBJ requirements.Human Resources Support:M

Sheldon, IA 51201 • (30.3 miles) • Full Time • 9/15/2026

***General Production Worker (Sheldon, IA)***Pay: $20–$21/hr**Shifts:6am–6pm6pm–6amWe’re hiring General Production Workers to support daily manufacturing operations in a fastpaced industrial environment.Responsibilities:Operate production and packaging equipmentPerform routine quality checksFollow safety procedures and maintain a clean work areaAssist with material handling and line setupMeet production goals and follow work instructionsRequirements:Ability to work 12hour shiftsReliable attendance and strong work ethicAbility to lift 30–50 lbsManufacturing experience preferred but not requiredApply Today!!Job Type & LocationThis is a Contract to Hire position based out of Sheldon, IA.Pay and BenefitsThe pay range for this position is $19.00 - $22.00/hr.Individual compensation offered for t

Brandon, SD 57005 • (39.5 miles) • Full Time • 9/10/2026

POSITION SUMMARY: You will work with a team where discipline and rigor are the highest priorities. You will perform tasks as assigned according to established procedures that support our high quality standards.RESPONSIBILITIES: As a Painter – Wind Tower Finishing, you must be able to:Prepare and mix paint while respecting established procedures and specificationsPrepare the surface to paint by cleaning and sandingPaint the section and do touch-ups if neededAnalyze the environmental conditions (weather, humidity, dew point, etc.)Complete the quality and the production documentsPerform all other duties as assigned by the Production SupervisorVALUED SKILLS: Manual DexterityDetail orientedConsistencyVigilanceSense of observationREQUIREMENTS : Must be able to:Wear a tight-fitting respirator an

Rock Valley, IA 51247 • (40 miles) • Full Time • 9/10/2026

Manufacturing Maintenance LeadDepartment: ManufacturingEmployment Status: Full-TimeJob Description: The Manufacturing Maintenance Lead is responsible for the routine maintenance, repair, and upkeep of equipment, machinery, buildings, and grounds across the manufacturing department at Post Equipment. This role independently organizes maintenance schedules, responds to equipment and facility issues, maintains records and inventory, and plans and completes assigned special projects from start to finish.ESSENTIAL DUTIES & RESPONSIBILITIESThe essential functions include, but are not limited to the following:Own routine inspections and preventive maintenance for equipment, machinery, buildings, and grounds, including filter and oil changes, lubrication, adjustments, and general upkeep.Maintain a

Brandon, SD • (39.1 miles) • Full Time • 8/26/2026

Are you ready to take the next step from skilled Installer to jobsite leader? At Groundworks, North America’s leader in foundation solutions, our CoForeman are driven professionals who are ready to build their skills to grow into a Foreman position. Working sidebyside with an experienced Foreman, you’ll learn how to lead crews, manage daily jobsite operations, and uphold our standards for quality, safety, and customer satisfaction. With handson leadership training, industry-leading certification program, and a clear path to advancement, this role is built for those who want to develop their leadership skills while continuing to do impactful work in the field.The Co-Foreman is a leader as well as a contributor on our crew and an integral part of our success. The Co-Foreman coordinates tasks

Brandon, SD • (39.1 miles) • Full Time • 9/17/2026

Do you enjoy hands-on production work and take pride in building high-quality products? Are you someone who likes working with metal, learning new skills, and being part of a team that works hard and supports each other?Groomer’s Best is looking for a dependable and motivated Paint & Fabrication Tech to join our growing manufacturing team. In this role, you will help produce custom stainless-steel products used by veterinarians, pet groomers, distributors, and outdoor customers across the country.This is a great opportunity for someone with fabrication experience or a mechanically inclined individual who wants to learn and grow in a skilled trade environment. We offer hands-on training, advancement opportunities, flexible scheduling, and a team culture focused on quality, accountability, a

Sioux Center, IA 51250 • (42.4 miles) • Full Time • 9/16/2026

Schedule:Monday – Friday---About LinkAt Link, our goal is to be a healthy organization that is great to work for, do business with, and to own. We believe our people make the difference, and we’re committed to creating a workplace built on respect, teamwork, and integrity.---QualificationsBachelor of Science degree in Mechanical, Manufacturing, or Industrial Engineering preferred or 3+ years of relevant experience.Metal fabrication, Lean Manufacturing, and Kaizen experience preferred, along with experience establishing production standards, equipment and process development.Demonstrate a strong willingness to learn and grow.---RequirementsUsing Lean Manufacturing principles proactively identifies and executes significant improvements to product quality and productivity through changes in p

Woodstock, MN 56186 • (31.5 miles) • Full Time • 9/16/2026

Description: SUMMARY As an O&M Field Technician you will be responsible for performing and overseeing the operations, maintenance and repair of wind turbines while ensuring all work all work is performed in a safe and efficient manner. Other requirements include:Must live within 45 miles of site location (Pipestone, MN)Ability to climb ladders up to heights of 300+ feetMust not exceed 280 lbs. for safety of employeeWork in confined spaces with diverse environmental conditionsAbility to lift up to 80 poundsPossess a valid driver's licenseRequired overnight travel for safety training and other required activitiesMajor components / Up tower gearbox repair / Gen bearing replacements / Borescoping / InspectionsContributes to team effort and maintains quality serviceKeeps fully informed of curre

Jackson, MN 56143 • (39.6 miles) • Full Time • 9/16/2026

The Production Internship will provide a broad base of experience over NFP’s entire production system. The intern will work and shadow in all facets of NFP production and with a variety of managers.Applications will be accepted September 15th through October 16th.

Harris, IA 51345 • (23.1 miles) • Full Time • 9/15/2026

Quality AssistantWe are seeking a reliable and detail-oriented Quality Assistant to support our Quality Department in ensuring products meet company, customer, food safety, and regulatory standards.Key Responsibilities:Perform routine quality and food safety inspections throughout productionMonitor production processes for compliance with company standards and proceduresConduct and assist with internal quality, food safety, and sanitation auditsComplete audit documentation and follow up on findings and corrective actionsAssist with HACCP, GMP, and other food safety programsInspect products for quality, specifications, labeling, and packaging requirementsCollect and document samples, inspection results, and quality recordsIdentify, document, and report quality or food safety concernsAssist

Edgerton, MN 56128 • (24.1 miles) • Full Time • 9/15/2026

Join a team that builds qualityand your future.At Fey Industries, Inc. we're more than just a manufacturerwe're on a mission to Brighten the World through our Actions. Whether it's the products we make or the way we support our people and communities, everything we do reflects our commitment to making a positive impact.Build your future with a company that values people, hard work, safety, and growth. We’re proud to produce high-quality products that make a difference in people’s lives. As a Production Team Member, you’ll be part of a supportive team, enjoy stable hours, and have opportunities to grow your skills and advance your careerall while contributing to something bigger than yourself.You might be a great fit if you are/have:18 years or older.Previous manufacturing or warehouse expe

Lake Park, IA 51347 • (27.8 miles) • Full Time • 9/15/2026

C & B Operations has grown over 35 years to include 38 John Deere dealerships in six states. We currently have an opening for a Service Technician for our location in Lake Park, Iowa. This individual will perform diagnostics, service repairs and maintenance work on customer and/or dealer-owned agricultural equipment.Benefits:Qualified applicants must be able to successfully complete a pre-employment drug test and background check. C & B Operations is a drug-free workplace.Competitive pay based on your experienceExcellent benefits including – Medical, Dental, Vision, and Accident Insurance, Short-Term Disability, Life Insurance, 401K with generous match...Progressive Paid Time Off and Paid HolidaysOpportunities to grow – We love to promote within and have excellent training programs availab

Rock Valley, IA • (37.9 miles) • Full Time • 9/15/2026

We are seeking a motivated individual to join our team as a Production Machinist at Valley Machining in Rock Valley, IA. As a Production Machinist, you will play a key role in our manufacturing process by operating and maintaining precision machinery to create high-quality parts and components. Positions of need include operation of Screw Machines or CNC Lathes, either on Day shift or Night shift, depending on applicant qualifications and availability (Night shift positions include a $4 per hour shift premium).No experience? No Problem - we will train you to build the skills needed to succeed and grow in this role!The ideal candidate will have a strong background in machining and a keen eye for detail. You should be able to read and interpret engineering drawings, set up and program machin

Sioux Center, IA 51250 • (42.4 miles) • Full Time • 9/15/2026

As a Fabrication Machine Operator, you play a critical role in producing highquality parts that keep our operation running smoothly. We will rely on your ability to safely set up and operate equipment, read blueprints, and ensure parts meet quality and tolerance requirements.This is a great opportunity for individuals with machine operating experience, manufacturing background, or handson production skills.We welcome applicants with experience as Machinists, CNC Operators, CNC Machinists, Press Brake Operators, Laser Operators, Fabrication Operators, and Manufacturing Technicians.Day to Day ResponsibilitiesOperate equipment efficiently to meet production and quality standardsSet up machines to manufacture parts according to specifications, including selecting and installing correct dies, t

Orange City, IA 51041 • (43.4 miles) • Full Time • 9/15/2026

Build the Future of Aerospace with UsWe're seeking team members who thrive in fast-paced manufacturing environments for our Production Team Member (Composite Technician) positions at our Orange City, IA facility.Check out what we are up to!Instagram: https://www.instagram.com/sekisui_aerospace_oc/Facebook: https://www.facebook.com/SEKISUIAerospaceOrangeCityYour Work Matters HereAt SEKISUI Aerospace, you're not just filling a position, you're joining a team that takes pride in precision, craftsmanship, and innovation.When you walk through our doors, you become part of a company, helping shape the future of aerospace manufacturing while building a stronger future for yourself.Type:Full Time, Non-ExemptSchedule1st and 2nd shift available1st Shift: 6:00 AM- 3:30 PM Monday - Thursday, Friday 6:

Alton, IA 51003 • (45 miles) • Full Time • 9/15/2026

Hawke & Co. Ag is a leading dealer of JCB Agricultural & Construction equipment. While also maintaining the leading market share and other short lines such as Vermeer, GEA, Meyer's and Meyer. If you have experience in automotive, diesel, or agriculture industries but are looking for a new challenge or change this job is for you!This full-time position is Monday through Friday, home every night with no nights or weekends.Key Responsibilies:Diagnose mechanical, hydraulic, and electrical issues on agricultural and construction equipmentPerform routine maintenance, inspections, and preventative serviceComplete repairs in the shop and in the field as requiredAccurately document labor, parts, and service work on work ordersPrepare new and used equipment for delivery and resaleCommunicate finding

Lester, IA 51242 • (30 miles) • Full Time • 9/10/2026

NAME:Part Time Production· Description- Dutchland Foods is looking to hire several Part time production workers. Job duties include working on the production line making product and working in packaging, packing the product into boxes. It may also include other production related duties that may include: Filling mixing, some cleaning, cheese slicing, and cheese shredding. Working days could be any day between Monday – Friday· Pay Range- $16.00 to $18.00

Orange City, IA 51041 • (43.4 miles) • Full Time • 9/9/2026

Build the Future of Aerospace with UsWe're seeking team members who thrive in fast-paced manufacturing environments for our Calibration Techniican position at our Orange City, IA facility.Check out what we are up to!Instagram: https://www.instagram.com/sekisui_aerospace_oc/Facebook: https://www.facebook.com/SEKISUIAerospaceOrangeCityYour Work Matters HereAt SEKISUI Aerospace, you're not just filling a position, you're joining a team that takes pride in precision, craftsmanship, and innovation.When you walk through our doors, you become part of a company, helping shape the future of aerospace manufacturing while building a stronger future for yourself.Type:Full Time, Non-ExemptSchedule1st Shift: 7:00 AM- 3:30 PM Monday - FridayBenefitsMedical (free employee only coverage and low-cost option

Sheldon, IA 51201 • (30.3 miles) • Full Time • 9/5/2026

General Responsibility Statement: The Manufacturing Manager is responsible for acquiring and directing the production areas of the facility. Ensures employees are capable of producing products within scheduled time frames, at targeted costs and quality specifications. Must maintain focus on primary objectives and the organizational mission and purpose.Essential Job Responsibilities: Supervises the production through the respective leaders to cause the retention and development of an adequate number of productive and motivated employees. Assures that all human resource-related programs are administered within company policies consistently.Manages people resources to cause achievement of the production schedule. Monitors production flow and cautions others in problem areas. Prepares product

Sheldon, IA 51201 • (30.3 miles) • Full Time • 9/5/2026

CNC Operator Sheldon, IA | Full-Time | Hourly |Monday-FridayRome Grinding Solutions is seeking a CNC Operator to support efficient production operations and ensure high-quality manufacturing output. This role is critical to meeting organizational goals and requires attention to detail, strong technical skills, and a commitment to safety and teamwork.Key Responsibilities:Perform prescribed preventive maintenance on CNC machinesMaintain clean equipment and a safe, organized work environmentFollow all safety regulations and wear required safety gearMeasure, examine, and test completed parts to ensure conformance to specificationsRead and interpret blueprints, drawings, and engineering documentationMeet production goals, quotas, and deadlinesManage time efficiently to maximize performance and

Sioux Center, IA 51250 • (42.4 miles) • Full Time • 9/5/2026

JOB TITLE: Lab TechnicianDEPARTMENT: Manufacturing/Virus Production – Commercial ProductsSUMMARYThe Lab Technician will play a crucial role in the production of quality commercial vaccines through the cultivation of multiple vector-expressed targets in our Sioux Center, IA lab facilities.ACCOUNTABILITIESReports to: Production SupervisorSupervises: Has no supervisory responsibilitiesESSENTIAL DUTIES & RESPONSIBILITIESPerforming aseptic procedures including cell culture manipulations and viral cultivation learned through on-the-job training.Perform necessary functions to manufacture multiple vector-expressed productsRoutine cleaning and disinfection of laboratory and laboratory equipment.Prepare, clean and sterilize glassware and associated tubing and related components.Ability to follow Sta

Sioux Center, IA 51250 • (42.4 miles) • Full Time • 9/5/2026

Cambridge TechnologiesJOB TITLE: Quality Assurance Specialist 1 CLASSIFICATION: Non-ExemptDEPARTMENT: Quality DATE REVISED: 6/01/2026SUMMARYThis position is responsible for assisting in documentation review and product release for Cambridge Technologies Manufacturing Departments in support of maintaining USDA compliance as well as all internal Quality Standards.ACCOUNTABILITIESReports to: Quality ManagerESSENTIAL DUTIES & RESPONSIBILITIESReview manufacturing documentation and supporting information.Assists in determining final disposition (approval/rejection) for products.Assists in providing USDA/CVB with required final product data and disposition.Assist during internal or external inspections.Assist in creating improved or new forms necessary for documenting quality or manufacturing act

Worthington, MN 56187 • (10.7 miles) • Full Time • 9/4/2026

Description: The Quality Technician Assures consistent deployment of established quality systems, drives improvements in customer relationships, monitor quality indices to assure they meet company / customer expectations, implementation of sustainable corrective actions, contribute to the financial wellbeing of the facility / company.Open Shifts: 1st, 2nd, 3rdRequirements: Role And ResponsibilitiesAssure a safe working environment for all employees targeting a zero-accident incident rateLeader of the Quality within the facility and owns the quality performance of the plant.Organize and lead teams of cross-functional personnel to solve both internal and external problems which may be affecting customer relations and/or plant finances.Enhance the workforce knowledge base of quality systems,

Worthington, MN 56187 • (10.7 miles) • Full Time • 9/4/2026

Vaxxinova US is seeking an individual to join our team as an Associate Manufacturing Technician on the Batching team in Worthington, Minnesota.At Vaxxinova US, you’ll be part of a passionate team dedicated to making a difference. We offer competitive pay and benefits, opportunities for growth, and a supportive work culture.About the role:The Associate Manufacturing Technician – Batching role is responsible for assisting and supporting the process, to ensure site wide compliance in production, testing, and distribution of veterinary biologic products, within the guidelines set by regulatory agencies. This position will work in an aseptic production laboratory within manufacturing.Shift: Monday to Thursday 5:00am to 2:30pm and Friday 5:00am to 9:00am (some flexibility may be possible).Main R

Sheldon, IA 51201 • (30.3 miles) • Full Time • 9/2/2026

Por que Rosenboom:Rosenboom es una empresa local y familiar que valora el trabajo en equipo, la seguridad, el liderazgo de servicio y la mejora continua. Ofrecemos un salario competitivo, excelentes beneficios, oportunidades de crecimiento profesional y una cultura de apoyo donde los empleados pueden generar un impacto todos los das.Acerca del Puesto:Te gusta configurar mquinas CNC, mantener tolerancias precisas y ver cmo tu trabajo se materializa en una pieza final de alta calidad?Buscamos un OperadordeMaquinas CNC que se enorgullezca de la precisin y la calidad de su trabajo. En este puesto prctico, se encargar de configurar y operar equipos CNC, monitorear el rendimiento de las mquinas y garantizar que cada pieza cumpla con las especificaciones exactas, al mismo tiempo que contribuye a

Jeffers, MN 56145 • (43.3 miles) • Full Time • 8/31/2026

Job Title: QA / QC Site ManagerLocation: Tracy, MinnesotaType: 12 month ContractCompensation: $75.00 - 78.50 per hourWork Model: Onsite – onsiteHours: 55.0 hours per weekResponsibilitiesReview EPC quality programs, policies, procedures, inspection plans, and turnover documentation. Ensure compliance with ASME B31.1 and B31.3 standards related to power, steam, and process piping. Perform field audits, site walks, and inspections to verify contractor adherence to quality procedures. Support and review welding oversight activities and code compliance. Identify hold points, witness points, and critical inspection/testing milestones. Witness hydrotests, pressure testing, and rotating equipment installation activities. Provide coaching and subject matter expertise to inspectors and project teams

Pipestone, MN • (36.5 miles) • Full Time • 8/30/2026

Pay: $18.00 - $21.00 per hourJob description:Job description:Job Summary We are seeking a meticulous and dedicated Polisher to join our team. The ideal candidate will have a keen eye for detail and a passion for delivering exceptional results. As a Polisher, you will be responsible for enhancing the appearance of vehicles through various polishing techniques, ensuring that every surface is clean and polished to perfection. Your role will involve working closely with co/workers to meet their expectations and maintain high standards of quality.DutiesPerform polishing and buffing on Aluminum componentsClean and prepare surfaces before polishing, ensuring all debris is removed.Utilize appropriate tools and materials for effective polishing, including buffers and polish compounds.Maintain clean

Luverne, MN • (20.9 miles) • Full Time • 8/28/2026

Join PIPESTONE as a Swine Production Records Manager!Location: Pipestone, MNSalary: $70,000–$80,000 (Depending on Experience)Are you passionate about agriculture, data analysis, and supporting producers in achieving success? PIPESTONE is seeking a Swine Production Records Manager to lead our FarmStats Records team and help deliver exceptional production data services that drive better decision-making for swine producers.In this key leadership role, you'll oversee the day-to-day operations of our FarmStats Records service, mentor and develop team members, support subscriber success through accurate production reporting, and identify opportunities to grow and enhance our services.What You'll DoLead, coach, and support the FarmStats Account Specialist and Data Entry teamsEnsure accurate, time

Worthington, MN 56187 • (10.7 miles) • Full Time • 8/28/2026

Good Life Begins With A Good Company.Champion Home Builders, Inc. wants YOU! We are seeking to hire a Sales Manager to join our team in Worthington, MN.WHAT DO WE OFFER? 401k Plan with Company Match Paid Vacation Paid Holidays Medical Rx Dental, Vision, and Life InsuranceWHO IS CHAMPION HOME BUILDERS, INC.?For decades, Champion has served as a leader in the manufactured housing industry and one of the largest mobile and modular home builders in North America. Champion offers many factory-built solutions, from single-family and multi-family homes to commercial and government buildings. Our manufactured homes, modular homes, mobile homes, park models, and commercial modular buildings can be found throughout the United States and western Canada.Throughout the organization, we act with integri

Orange City, IA 51041 • (43.4 miles) • Full Time • 8/27/2026

Description: Now Offering a $750 Sign-On Bonus!Do you care about animal health, even if you’re not working directly with animals every day?Join our team as a Production Associate IIAt Van Beek Natural Science, the work we do in production shows up in barns, dairies, and operations across the country. Healthier animals. Better outcomes. Stronger operations.You may not be on the farm, but what you do here matters to the people and animals who are.Where You Fit In This role is the backbone of our operation. You help ensure every product is made right, every time. That consistency is what our customers rely on to care for their animals.What You’ll Be Responsible For Operate production equipment safely and efficientlyFollow production schedules and keep work moving on timeAssist with formulatio

Brandon, SD • (39.1 miles) • Full Time • 8/22/2026

Required experience in a manufacturing facility. IMKO Workforce Solutions is seeking a plumbing assembler for a production company in Brandon. The ideal candidate will have plumbing experience, come to work daily and have a team mentality. Requirements of Plumbing Assemblers: Previous manufacturing experience requiredPrevious plumbing experience highly preferredPrevious welding experience preferredFamiliarity with hand tools and power toolsAble to read a tape measure and blue printsAttention to detail is a mustAbility to meet all safety standardsHigh school diploma or equivalentExceptional interpersonal skillsExcellent attendanceSteel toed shoes are requiredPhysical ability to perform the needs of the job including ability to lift up to 50 lbs.Pre-employment drug test and background check

Brandon, SD • (39.1 miles) • Full Time • 8/21/2026

POSITION SUMMARYThe Truss Assembler/Builder is responsible for assembling roof trusses, floor trusses, and wall panels according to design specifications and production schedules. This role involves reading work orders, using hand and power tools, and ensuring components meet quality and safety standards. Duties may also include pulling plates, banding and marking finished products, and moving materials to designated areas. Attention to detail, efficiency, and teamwork are essential to success in this role.ESSENTIAL FUNCTIONS AND RESPONSIBILITIESUnderstand shop drawings and work orders (electronic and manual) to determine building requirements, order of operations, material specifications, and plate placement.Help unload and organize incoming lumber, plates, and supplies to keep inventory

Brandon, SD 57005 • (39.5 miles) • Full Time • 9/15/2026

**Plumbing Assembly - 4 Day Work Week!** This role focuses on installing, assembling, and testing plumbing and fire protection systems on specialty fire trucks. You will work with a variety of pipes, fittings, valves, and gauges to ensure reliable water and drainage systems, while meeting production goals and maintaining high quality standards.Responsibilities:Install heat exchangers that are not already installed, including associated valves.Install master drains and ensure proper routing for drainage systems.Install primer controls and verify correct operation.Install manual pump shift mechanisms to support pump operation.Install discharge lines at rear (right and left) and front bumpers.Install bleeder drains to ensure proper system venting and drainage.Skills & Qualifications :Proficie

Brandon, SD 57005 • (39.5 miles) • Full Time • 8/21/2026

You will operate a cutting machine with plasma or flame and bevel sides of steel plates using the beveling machine. This is the first step of building a tower section.As a Cutting Table Operator, you must be able to:Operate a cutting machine (plasma cutting table)Bevel all sides of steel plates using the beveling machinePosition steel plates on the cutting table using the vacuum plate lifterSafely operate the overhead crane (see requirement below)Remove scrap from the platesGrind the plates as neededVerify thickness, dimensions and quality of steel plate surfaceRecord information on the follow-up filesPerform all others duties as assigned to help out the crew VALUED SKILLS: Manual dexterity;Sense of observation;Detail oriented;Rigorously follow established procedures;Collaboration and team

Brandon, SD • (39.1 miles) • Full Time • 9/17/2026

Do you enjoy hands-on production work and take pride in building high-quality products? Are you someone who likes working with metal, learning new skills, and being part of a team that works hard and supports each other?Groomer’s Best is looking for a dependable and motivated Production Assembler to join our growing manufacturing team. In this role, you will help produce custom stainless-steel products used by veterinarians, pet groomers, distributors, and outdoor customers across the country.This is a great opportunity for someone with fabrication experience or a mechanically inclined individual who wants to learn and grow in a skilled trade environment. We offer hands-on training, advancement opportunities, flexible scheduling, and a team culture focused on quality, accountability, and c

Rock Valley, IA • (37.9 miles) • Full Time • 9/15/2026

Join Our Team as a Night Shift CNC Setup Production Machinist at Valley Machining!Job Description: Are you a night owl who thrives in a fast-paced manufacturing environment? Do you have a knack for setting up CNC machines and producing high-quality parts? If so, we want you to join our team as a Night Shift CNC Setup Production Machinist at Valley Machining in Rock Valley, IA!The ideal candidate will have a strong background in machining and a keen eye for detail. You should be able to read and interpret engineering drawings, set up and program machines, and perform quality checks on finished products. A proactive attitude and the ability to work independently are also essential for success in this role.Key Responsibilities: Perform CNC machine setups for night shift productionOperate CNC

Sioux Center, IA 51250 • (42.4 miles) • Full Time • 9/15/2026

Schedule:Day Shift:Monday – Friday: 6:00 AM – 2:30 PM Night Shift: Monday – Thursday 4:00 PM – 4:30 AM---About LinkAt Link, our goal is to be a healthy organization that is great to work for, do business with, and to own. We believe our people make the difference, and we’re committed to creating a workplace built on respect, teamwork, and integrity.---Key ResponsibilitiesAssemble according to detailed instructions and quality standards, taking pride in doing the right thing every timeInspect finished products to ensure they meet company specifications and set the standard for reliabilityOperate machinery and tools in a safe and efficient mannerCollaborate with team members to meet production deadlinesbecause we succeed as one teamMaintain a clean and organized work environment that reflect

Pipestone, MN • (36.5 miles) • Full Time • 9/11/2026

We're Hiring: Grow Finish Production ManagerPIPESTONEAre you a strong leader with a passion for animal care, team development, and production excellence? PIPESTONE is looking for a Grow Finish Production Manager to oversee swine production operations, lead employees, and drive efficiency and profitability across an assigned unit.What You'll DoLead daily farm production activitiesTrain, coach, and develop farm employeesEnsure animal welfare, biosecurity, and safety complianceManage inventories, feed ordering, and production recordsOversee facility maintenance and ventilation systemsAnalyze financial performance and support budgeting effortsPartner with HR on recruiting, retention, and employee developmentMaintain accurate payroll, HR, and production documentationWhat We're Looking ForHigh S

Orange City, IA 51041 • (43.4 miles) • Full Time • 9/5/2026

Build the Future of Aerospace with UsWe're seeking team members who thrive in fast-paced manufacturing environments for our Composites Manufacturing Engineer position at our Orange City, IA facility.Check out what we are up to!Instagram: https://www.instagram.com/sekisui_aerospace_oc/Facebook: https://www.facebook.com/SEKISUIAerospaceOrangeCityYour Work Matters HereAt SEKISUI Aerospace, you're not just filling a position, you're joining a team that takes pride in precision, craftsmanship, and innovation.When you walk through our doors, you become part of a company, helping shape the future of aerospace manufacturing while building a stronger future for yourself.Type:Full Time, ExemptBenefitsMedical (free employee only coverage and low-cost options available)Dental, Vision, PrescriptionLife

Worthington, MN 56187 • (10.7 miles) • Full Time • 9/3/2026

Vaxxinova US is seeking an individual to join our team as a Manufacturing Technician on the viral production team in Worthington, Minnesota.At Vaxxinova US, you’ll be part of a passionate team dedicated to making a difference. We offer competitive pay and benefits, opportunities for growth, and a supportive work culture.About the role:The Manufacturing Technician is responsible for performing, assisting and supporting processes, to ensure site wide compliance in production, testing, and distribution of veterinary biologic products, within the guidelines set by regulatory agencies. This position will work in an aseptic production laboratory within manufacturing.Shift: Monday to Friday 7:30am to 4:00pm$22-$26 per hour depending on experienceMain Responsibilities:Work under minimal supervisio

Sheldon, IA 51201 • (30.3 miles) • Full Time • 9/2/2026

Why Rosenboom: Rosenboom is a locally owned, family-operated company that values teamwork, safety, servant leadership, and continuous improvement. We offer competitive pay, excellent benefits, career growth opportunities, and a supportive culture where employees are empowered to make an impact every day. About the Role:Do you enjoy working with machinery, reading blueprints, and producing quality parts in a fast-paced manufacturing environment?We're looking for a Saw Operator who takes pride in accuracy, productivity, and attention to detail. In this hands-on role, you'll operate and monitor saw equipment, gather and process material, inspect parts to ensure they meet specifications, and help maintain a safe, clean, and efficient work area while contributing to the success of the team.Resp