Auburn Hills, MI 48326 • (43.2 miles) • Full Time • 9/10/2026

In this role you will be responsible forLead supplier quality activities for new product development and launch programs.Manage APQP and PPAP processes to ensure supplier readiness and compliance.Collaborate with Engineering, Purchasing, and suppliers on feasibility reviews, quality planning, and component approvals.Monitor supplier performance, project milestones, and quality deliverables to meet launch timing requirements.Conduct supplier audits, production trials, Run-at-Rate events, and process assessments.Drive root cause analysis, corrective actions, and resolution of supplier quality issues through 8D methodology.Ensure compliance with quality standards, supplier requirements, and documentation processes.Support continuous improvement initiatives, supplier development, and lessons l

Auburn Hills, MI 48326 • (43.2 miles) • Full Time • 9/9/2026

Quality Assurance Technician / CMM Programmer Contract: $30-$35/hr Principle Duties and Responsibilities Perform inspections of in-process builds on vehicle components, sub-assembly systems, and complete assemblies, including torque measurement and documentation according to established procedures. Approve or reject items and document inspection results as required. Work in a cross-functional environment utilizing Polyworks, PC-DMIS, and programming skills as applied to an articulating Romer ARM and CMM. Perform precision inspection verifications on mechanical parts, components, assemblies, and materials. Complete reports of Receiving, In-process, and Final Vehicle inspections to communicate results. Communicate with internal customers as required to resolve inspection, engineering, and m

Auburn Hills, MI 48321 • (43.5 miles) • Full Time • 9/9/2026

DescriptionThere are three groups within the Powertrain Technician TeamPallet Build Technicians Assembly of automotive engines per engineering specifications. Assembled on a air pallet and moved into the dynamometer cell.Engine Validation Technicians Engine Validation is mechanical part swaps and stand testing via scripts. Working with prototype components.Engine Development Technicians Engine Development is calibration development, mechanical experiments, fabrication and manual test points to run. Preparing the engine in the vehicle for shipment to Milford for further vehicle testing once the engine is 30% calibrated.Qualification Standards:Assembly/Modification and/or Fabrication to existing Engines to prep for testingFabricate components on engine and test stand/dynos for testingInstrum

Holly, MI 48442 • (32.7 miles) • Full Time • 9/8/2026

Key Responsibilities:Performing preventative maintenance and cleaning of equipment.Assisting with customer service and equipment servicing.Delivering, repairing, and testing equipment.Providing emergency repairs and routine maintenance.Preparing orders for delivery and loading/unloading equipment.Interacting professionally with customers.WORK SCHEDULE 7AM - 3:30PM PLUS FLEXIBILITY FOR OVERTIMENO EXPERIENCE NECESSARY!!Mechanical inclination and basic tool knowledge;Strong work ethic and positive attitude.Ability to troubleshoot equipment issues and perform repairs.Effective communication skills.Previous HVAC experience is a plus, but NOT required.Valid driver's license and clean driving record.Willingness to pass pre-employment drug screenings.\nCompany DescriptionAbout Rankin:Rankin has be

Auburn Hills, MI 48326 • (43.2 miles) • Full Time • 9/8/2026

We are looking for an Electrical Controls Engineer to take charge of designing and delivering turnkey conveyor control systems for major projects. You’ll work 'hands-on' with a talented team of engineers, subcontractors, and project managers to bring complex automation systems to life.What You’ll Do:Turn customer requirements into smart, efficient control system designsCreate hardware/software drawings, PLC code, and operational configsOversee panel builds, wiring, and subcontractor workCollaborate with mechanical teams to ensure seamless integrationSupport installs, debug, and start-up on-site (domestic & international)Drive projects from concept through completionRegular travel to customer sitesSkills & Experience Required:BS in Electrical/Controls Engineering (or similar)Experience work

Pontiac, MI • (44.4 miles) • Full Time • 9/8/2026

Do you want to grow with us?At DXP we arepassionateabout what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to thehighest qualityof customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we willencourageandempoweryou to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be thebest solutionfor the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers.Check out our many videos to learn more!http://

Saginaw, MI 48604 • (26.4 miles) • Full Time • 9/7/2026

Engineer to assist in Construction Oversight and Management: mineral processing plant, mining plants, product transfer, packaging, and other projects. Process Design and Control: Mined gypsum processing, limestone processing, mineral processing and packaging, ship and rail loading, and apply general logic to all processes of the companies, Purchasing: specification and oversight of equipment purchased- transportation, conveyors, packaging, processing, mining, yellow equipment, Environmental: assist staff with municipal and onsite infrastructure installations and operations, Mining: work with management staff to make mining and mine site decisions that are logical and intelligent. Management: Work directly with owners and key managers to bring logic and engineering background to discussions

Cass City, MI 48726 • (30.2 miles) • Full Time • 9/7/2026

Plant Manager - Plastic Extrusion A well established manufacturer of custom plastic extrusion products is seeking a hands on Plant Manager to lead a manufacturing operation in Michigan. This company supports demanding OEM and supplier customers with engineered plastic profiles used in applications such as sealing systems, trim components, electrical channels, wire management, closures, construction related products, and other custom extruded plastic components.This is a strong opportunity for a manufacturing leader who understands extrusion, people leadership, operational discipline, safety, quality, production efficiency, and customer expectations. The right person will bring a practical plant floor leadership style, strong follow through, and the ability to lead supervisors, operators, m

Flint, MI • (18.3 miles) • Full Time • 9/6/2026

*Description*UBC Michigan Millwrights is seeking experienced Journeyman Millwrights to join our organization. If you are an experienced Millwright in the field of machine and conveyor installation/ rigging/ blue print reading/ welding and torch cutting this is your chance to advance your career.We are nationally recognized as the largest Millwright organization for over a century, employing the most highly skilled and qualified millwrights in all of North America. We are affiliated with over 350 millwright construction contractors in the state of Michigan alone.*Requirements*As a Journeyman Millwright you will be responsible for the installation of and maintaining various types of industrial and commercial machinery, automotive robotic systems/ conveyor and rotating equipment.**Organizatio

Romeo, MI • (41.7 miles) • Full Time • 9/6/2026

The tool maker's primary purpose is to ensure tools and dies are built, maintained and repaired in a timely fashion. The tool maker reports directly to the tool room foreman for assignment of duties and is expected to track and document all work performed.Responsibilities for Tool Maker:Operate tool room equipment safely and efficiently and in accordance with OSHA standards and company proceduresPerform extensive die maintenance such as rebuilding die sections, inserts and forms and engineering changes on all types of dies, fixtures, gages or other tooling needsRead and understand specifications such as blueprints, sketches, models or descriptions, and visualize product to determine materials required and machines to be used to fabricate parts, build tooling, and meet customer requirements

Flint, MI 48501 • (23.8 miles) • Full Time • 9/6/2026

Job Title: Production SupervisorJob DescriptionThis role serves as a Production Supervisor in Production facility in a fast-paced, high-volume automotive manufacturing facilityThe Production Supervisor leads hourly teams, oversees daily manufacturing operations, and ensures that safety, quality, productivity, and cost targets are consistently achievedThis position requires strong leadership, hands-on involvement on the shop floor, and the ability to manage change and ambiguity while driving continuous improvementJob ResponsibilitiesLead and manage daily manufacturing operations for engine assembly and machining, adjusting production plans as needed to meet demand.Drive performance in safety, quality, productivity, cost, and delivery with a strong focus on SPQRCE metrics.Oversee production

Auburn Hills, MI • (43.5 miles) • Full Time • 9/6/2026

Field Service Engineer – CNC Machine ToolsLocation: USA (Regional Travel Required)Salary: $90,000 Base + Paid Overtime + 5% KPI BonusAre you an experienced CNC Field Service Engineer looking to join a growing global machine tool manufacturer?Jyoti CNC Automation is expanding its U.S. operations and is seeking a hands-on Field Service Engineer to install, troubleshoot, maintain, and support CNC machine tools at customer facilities throughout the region. If you enjoy solving complex technical problems, working directly with customers, and traveling, we'd love to hear from you.What You'll DoInstall and commission CNC machine tools at customer sitesPerform preventive maintenance and emergency repairsTroubleshoot electrical, mechanical, hydraulic, and CNC control systemsDiagnose issues involvin

Saginaw, MI 48604 • (26.4 miles) • Full Time • 9/5/2026

Background:SWS-Trimac, Inc. is an Engineering company that specializes in providing advanced welding, CNC machining, plus destructive and non-destructive testing services to the automotive, aerospace, biomedical, chemical, defense, and other markets since 1967. We specialize in joining metals: from the standard 1018 carbon and stainless steels to the more exotic aerospace-grade aluminum, titanium, copper, nickel and cobalt alloys. From small-lot prototype development to large volume turnkey production, we are a contract manufacturer that consistently meets customer specification and timing requirements.Job Function:SWS-Trimac, Inc is seeking to fill a need for a CNC Okuma Lathe Operator & Programmer. Successful candidates will be a key team member in our machine shop.Essential Functions &

Lake Orion, MI 48359-1324 • (36.5 miles) • Full Time • 9/4/2026

Job Summary:The Senior BMS Controls and Algorithm Engineer leads the design, development, and validation of Battery Management System (BMS) controls, estimation algorithms, and functional features for high-voltage battery systems. The role covers the functional scope of a production BMSstate estimation (SoC, SoH, SoP, SoE), contactor controls, cell balancing, thermal management, isolation monitoring, diagnostics, and functional safetyacross multiple chemistries and applications. This role features MATLAB/Simulink and model-based design development approach to deliver production software that improves battery performance, safety, and life, and partners with systems, software, validation, and vehicle integration teams to bring it to production.Responsibilities:Develop and validate BMS state

Flint, MI • (18.3 miles) • Full Time • 9/3/2026

Prepare, process, and track purchase orders for raw materials, production supplies, maintenance parts, tools, packaging, safety supplies, and other plant needs.Review purchase requisitions for accuracy, proper approvals, item descriptions, quantities, pricing, and delivery requirements.Contact vendors to obtain quotes, confirm and negotiate pricing, set terms with suppliers, verify availability, and follow up on order status and delivery dates.Maintain accurate vendor, item, pricing, and purchasing records in the company system.Coordinate with production, maintenance, inventory control, shipping/receiving, and management to support timely procurement of materials and supplies.Monitor open purchase orders and communicate delays, shortages, or substitutions to appropriate departments.Assist

Auburn Hills, MI • (43.5 miles) • Full Time • 9/3/2026

Requirements:Assemble quality electrical panels and complete machine wiring using provided prints.Able to understand general electrical practices that provide safe, dependable equipment.Troubleshoot and assist engineering in problems that may arise during build.Wire machinery to electrical panel while using correct components.Able to modify prints accurately to ensure safety.Able to communicate clearly and professionally.Self-motivated and positive attitude.Ability to work with metric and standard prints. Exercises considerable care of equipment, tools, parts, machines, and materials to prevent damage.Must be able to lift 50 lbs.Able to read and understand electrical schematics.Able to understand electrical circuitry and safe practices.Must provide own tools including standard electrician

Corunna, MI 48817 • (30.2 miles) • Full Time • 9/3/2026

POSITION TITLE: Manufacturing Process EngineerDEPARTMENT:EngineeringACCOUNTABILITY:Engineering ManagerJOB SUMMARYPerforms basic professional manufacturing engineering and production assignments in support and under the direction of senior engineers and Management.MANUFACTURING RESPONSIBILITIESSets up, and programs CNC Lathes and Mills. Including but not limited to the following:Changing of chucks, tool bar changes and touch offs, cutting jaws on lathe, indicating in tailstocks, checking for backlash, indicating in drills in lathe turrets, indicating andPicking up work offsets, creating new and editing CNC programs.Experience with Cylindrical grinders, Broaches and Rack Rolling processes preferred, but not required.High-level trouble shooting and problem-solving skills related to tool break

Pontiac, MI • (44.4 miles) • Full Time • 9/3/2026

A national company with a facility in the Pontiac, MI area is currently seeking a Machine Shop Repair Supervisor for an opportunity with their growing team. This is an exciting opportunity for candidates seeking a position with opportunities to grow and advance within the organization.Machine Shop Repair Supervisor will be working a full-time, with pay rates anticipated to be $35 - 38 per hour based on each candidate's experience and education. All well-qualified candidates will be considered regardless of pay rate. The company offers excellent benefits including medical, dental, company paid life and disability insurance, 401k, and more.Qualified candidates will have most, if not all, of the following skills and experience.8+ years of experience in supervising a multi-faceted repair and s

Grand Blanc, MI • (23.7 miles) • Full Time • 9/2/2026

Automotive Quality Engineer – Tier 1 ManufacturingPosition OverviewWe are seeking an experienced Quality Engineer to support quality performance within a fast-paced automotive manufacturing environment. This position will work closely with Production, Engineering, Maintenance, Supply Chain, and customers to resolve quality concerns, improve manufacturing processes, and ensure compliance with automotive quality standards.The ideal candidate is a hands-on quality professional who is comfortable working directly on the manufacturing floor, investigating quality issues, leading corrective actions, and driving continuous improvement.Key ResponsibilitiesSupport plant quality activities to ensure products and manufacturing processes meet customer and internal requirements.Lead root cause analysis

Romeo, MI 48065 • (38.4 miles) • Full Time • 8/29/2026

About the Role:Esko Roofing and Sheet Metal is looking for a skilled Commercial Roofing and Sheet Metal professional to join our team in Metro Detroit, MI. This is a hands-on opportunity to work on exciting commercial projects where your craftsmanship and expertise will make a real impact. If you take pride in quality work and want to be part of a dependable crew, we want to hear from you!Esko Roofing and Sheet Metal is seeking qualified and motivated individuals for commercial roofing and sheet metal installation. Join us and become a team member with one of the leading commercial roofing contractors in Michigan. We specialize in the installation and repair of single ply roofing systems such as EPDM, PVC, and TPO. We are also one of the premier installers of standing seam sheet metal roof

Flint, MI • (18.3 miles) • Full Time • 8/28/2026

The primary function of theIndustrial Engineeris to design, develop, analyze, and improve integrated manufacturing systems and processes. This position is responsible for improving productivity through the effective utilization of people, processes, materials, equipment, and technology.The Industrial Engineer will support manufacturing operations by analyzing production processes, developing and maintaining standardized work, conducting time studies, evaluating workstation and production layouts, improving throughput, optimizing material flow, and implementing continuous improvement initiatives.This position will work closely with Production, Engineering, Quality, Maintenance, and UAW counterparts on production Industrial Engineering and Ergonomics matters. The successful candidate will be

Freeland, MI 48623 • (34.7 miles) • Full Time • 8/28/2026

DescriptionA Precision Grinder with advanced experience in precision grinding operations and process development. This role is responsible for grinding high-precision ball screw components while developing and maintaining processes capable of achieving extremely tight dimensional and surface finish requirements. The ideal candidate will understand the impact of outside processing and material conditions on final grind geometry and performance.Set up, program (where applicable), and operate precision grinding equipment including cylindrical, centerless, thread, and surface grindersDevelop grinding processes for precision ball screw components and related assembliesAnalyze engineering drawings and process requirements to determine grinding strategy and stock allowancesCompensate for dimensio

Carrollton, MI 48724 • (23.5 miles) • Full Time • 8/26/2026

CAD Technician401 Balsam Carrollton, MI 48724, USAFull-timeCompany DescriptionD&M Site, Inc. is a Michigan based consulting firm, specializing in surveying and engineering services. Established in Carrollton, MI in 2013. We have an exciting, fast paced, and challenging environment where dedication and performance are rewarded. D&M offers competitive salaries, health, prescription, term life insurance plans and IRA Investment plan.Job DescriptionD&M is seeking motivated, dedicated, and qualified individuals who are willing to put client needs first. Individuals in this CAD position will be trained in house to develop both 2D & 3D CAD drawings for miscellaneous surveying and engineering purposes. They can expect to perform technical drafting using software programs and coordinate with engine

Howell, MI 48855 • (44 miles) • Full Time • 8/24/2026

SUMMARYResponsible for creating, documenting, developing all APQP documents relating to new product launches and training the operational groups to secure a successful PPAP and launch of all new programs.ESSENTIAL DUTIES AND RESPONSIBILITIESInclude the following. Other duties may be assigned.Lead all APQP functions as it relates to new programs culminating in successful launch of said programs.Assist in developing and training all operational groups of processes and requirements that relate to the launch of new programs.Understand, communicate and train all operational personnel on customer specific requirements.Lead / participate in corrective action audits and problem solving teams to support Continuous Improvements to meet performance criteria once a new program is launched.Perform Proc

Armada, MI 48005 • (42.3 miles) • Full Time • 8/22/2026

Are you looking for a clean, team-oriented environment with GREAT hours? Are you seeking a workplace that provides established processes where you can learn through hands-on experience? Do you prefer a professional environment with a focus on details and getting things “right”?This role is best suited for individuals who enjoy staying active, working with their hands, and performing repetitive tasks with consistency. This is a full-time, year-round position with opportunities to learn new skills, cross-train, and grow within the company.If that sounds like you and you're a hardworking team player, we'd love to have you on our Production team!The Pond Guy / Airmax, Inc. is the leading manufacturer and distributor of pond, lake, and water garden products, including aeration systems, fountain

Oxford, MI • (33.8 miles) • Full Time • 8/22/2026

PRODUCTION SUPPORT ASSOCIATEHealthy Dogma | Oxford, MichiganHealthy Dogma is hiring two dependable Production Support Associates to help support our growing pet food business. This is a hands-on position for someone who takes pride in working hard, staying productive, and maintaining a clean and organized workspace.Schedule and CompensationMonday through Friday, 9:00 a.m.–3:30 p.m.Approximately 32 hours per week$14 –$19 per hour, based on experienceOnsite position in Oxford, MichiganNo benefits are currently offeredPrimary ResponsibilitiesPack completed food batches into packages of various sizesRepackage treats and other productsPick, pack, and prepare customer orders for shipmentReceive, organize, and maintain warehouse inventoryRestock production and fulfillment areasAssist with labelin

Auburn, MI 48611 • (37.6 miles) • Full Time • 8/18/2026

Full time contract to direct opportunity in the Bay City area for an experienced Quality Engineer $35 - 45/hr Full Benefits - Medical/Dental/Optical & Vacation/Holiday This is a full time onsite role. Degree requiredWhat You Will Do: Facilitate and participate in process reviews to support shop capability and cost analysis.Support process certification projects to implement process improvements.Evaluate procedures and processes to determine compliance with applicable requirements.Investigate non-conformances to assist in root cause, identify corrective actions and trackeffectiveness. Utilize continuous improvement tools to support the cellular concept and make processimprovements. Assist to business metrics as defined by Cells (Cost, Quality, Delivery and EH&S).Demonstrate dedication to th

Flint, MI • (18.3 miles) • Full Time • 8/16/2026

We are seeking a Field Service Controls Engineer to become an integral part of our team! You will perform controls engineering duties in the Industrial Automation Field Including but not limited to: Automotive, Defense, Food Prep, Entertainment, Pharmaceutical and Aerospace.Responsibilities:Start up and debug of new systems - Siemens experience is preferred but not requiredProblem solving existing systemsProduction supportFactory Information SystemsVehicle Scheduling SystemsMust be able to travelQualifications:Previous experience in the controls fieldExcellent personal and communication skillsSelf starting work ethicAbility to work well in teamsStrong problem solving and critical thinking skills\nCompany DescriptionR&E Automated Systems (www.reautomated.com) is the industry leader in Autom

Pontiac, MI • (44.4 miles) • Full Time • 8/15/2026

Essential Job Responsibilities:· Assemble and crimp hoses to manufacture specifications· Follow strict quality control procedures· Follow written processes or verbal instructions· receive inventory and put away· Safely operate hi-lo in tight areas.· Safely operate basic hand tools and power tools/equipment· Cylinder RepairAbilities and Expertise Required: · High School Diploma or equivalent· Previous work experience preferred· Mechanically inclined· Strong Multi-tasking skills· Basic understanding of Hydraulics· Strong problem-solving skills· Ability to use computer for basic tasks· Must be able to bend, lift and carry a minimum of 50lbs· Strong organization skills required to keep a clean, well-kept inventory

Clarkston, MI 48346 • (37.9 miles) • Full Time • 8/28/2026

Benefits:Competitive salaryEmployee discountsFree food & snacksFree uniformsOpportunity for advancementTraining & development Love fast-paced vibes, good people, and great food? Join the team at Chicken Shack! Now hiring Full-Time & Part-Time Team Members no experience needed, we’ll train you! What you’ll get: Flexible schedulesCompetitive pay + overtime opportunitiesGrowth and advancement opportunitiesFun team environmentWhat you’ll do: Help customers with a smilePrepare and serve fresh foodKeep things clean, organized, and running smoothlyWe’re looking for reliable, positive team players ready to learn and grow. Apply today and see why Chicken Shack has been a local favorite since 1956!

Bay City, MI 48708 • (25.4 miles) • Full Time • 9/10/2026

Mersen is a global expert in electrical specialties and advanced materials for high-tech industries.Present in 33 countries with 50 industrial sites and 18 R&D centres, Mersen develops custom solutions and supplies key products to meet the new technological challenges that will shape tomorrow's world.For more than 130 years, Mersen has been constantly innovating to support and satisfy its customers' needs with the same high standards.Be it in wind power, solar power, electronics, electric vehicles, aeronautics, space or countless other sectors, wherever technology is progressing, you will always find a bit of Mersen.Main dutiesPURIFICATION PROCESS OPERATORReports to: Technical SupervisorFully participate in and support the MERSEN Quality System.General Description:Purification of various g

Bay City, MI • (28.5 miles) • Full Time • 9/10/2026

About the RolePremier Global Links LLC is seeking a skilled CNC Machinist to support precision manufacturing operations in Bay City, Michigan.The CNC Machinist will set up, adjust, and operate large CNC machines, perform precision machining to close tolerances, inspect finished parts, and maintain product quality according to established specifications and work instructions.Key ResponsibilitiesSet up, adjust, and operate large 3-axis and 5-axis CNC machines.Perform machining operations according to drawings, specifications, setup instructions, and work orders.Enter CNC instructions based on programmer specifications.Select and install appropriate tooling, attachments, and fixtures.Run pilot pieces, inspect results, and make machine adjustments to correct variances.Operate and monitor multi

Auburn Hills, MI 48326 • (43.2 miles) • Full Time • 9/10/2026

The role of a Pre-Analyst - Control Tower is critical in ensuring effective communication between the customer and the company, particularly in the context of product quality and service issues. Here's a breakdown of the key responsibilities and tasks associated with this position: 1. Voice of the Customer (VOC): · Utilizing various sources of customer feedback such as warranty information, parts return data, and service reports to understand customer experiences and concerns. · Actively listening to customer feedback to identify patterns, trends, and recurring issues. 2. Issue Identification and Triage: · Analyzing data to identify emerging issues and potential problems with products or services. · Prioritizing identified issues based on severity, impact on customers, and potential risks

Auburn Hills, MI • (43.5 miles) • Full Time • 9/10/2026

Job Title: AssemblerLocation: Auburn Hills, MI (On-site)Job Type: Full-TimeAbout the Company:Our client is a Michigan-based engineering and manufacturing solutions provider headquartered in Auburn Hills with over 25 years of experience. They specialize in custom-engineered control solutions, including robotic system engineering, electrical control panels, pneumatic assemblies, and custom cable harnesses. The company is ISO 9001-2015 certified.About the Role:This is a hands-on, entry level assembly role for someone mechanically inclined. You would build mechanical and electrical products from blueprints and work instructions.Responsibilities:• Build products: put together mechanical or electrical parts using hand tools and power tools• Assemble training carts with robot displays used for ha

Holly, MI 48442 • (32.7 miles) • Full Time • 9/9/2026

Customer Quality EngineerHolly, MichiganOn-Site PositionDirect Hire Opportunity$90,000–$100,000 AnnuallyPOSITION SUMMARYThe Customer Quality Engineer is responsible for supporting customer quality requirements and serving as a key connection between the customer and internal manufacturing teams. This position focuses on maintaining strong customer relationships, resolving quality concerns, supporting quality system compliance, and driving improvements that strengthen product and process quality.QUALIFICATIONSBachelor’s degree required.Must have current or previous experience working at Toyota.5 years of quality engineering experience, with a strong understanding of quality systems, manufacturing processes, and advanced quality practices.3–5 years of experience within automotive electronics

Oxford, MI • (33.8 miles) • Full Time • 9/9/2026

Controls EngineerDirect Hire$80-100k Location: Oxford, MI Travel: 25-40% (U.S., Canada, Mexico, and South Korea) Our client is a growing custom machine builder and automation company specializing in balancing machines, gauging and measuring systems, press technology, and other engineered automation solutions serving the automotive, aerospace, aviation, military, marine, agricultural, racing, and industrial markets. They are seeking an experienced Controls Engineer to design, program, commission, and support custom automation equipment from concept through installation. This role offers significant ownership of projects, direct customer interaction, and the opportunity to work on highly specialized capital equipment for industry-leading manufacturers. Key ResponsibilitiesDesign and develop

Otter Lake, MI 48464 • (7 miles) • Full Time • 9/9/2026

Mersen is a global expert in electrical specialties and advanced materials for high-tech industries.Present in 32 countries with 50 industrial sites and 24 R&D centres, Mersen develops custom solutions and supplies key products to meet the new technological challenges that will shape tomorrow's world.For more than 130 years, Mersen has been constantly innovating to support and satisfy its customers' needs with the same high standards.Be it in wind power, solar power, electronics, electric vehicles, aeronautics, space or countless other sectors, wherever technology is progressing, you will always find a bit of Mersen.Main dutiesPrepares production cycles in accordance with manufacturing procedures.. >> Assessment indicator : Number of procedure conformitiesLoads and unloads material or part

Saginaw, MI 48601 • (20.1 miles) • Full Time • 9/9/2026

Position Summary:This position is responsible for learning all production, management, and supervision operations of their assigned Midwest Manufacturing production facility.Primary Responsibilities:ProductionEnsure that all product is built in the most efficient wayEnsure that all orders are filled within an acceptable lead time.Involved in setting and evaluating production quotas, both quantity and qualityManage and lead team members in your areaWork with supervisors and managers in your area to accomplish goalsCome up with innovative ideas to improve current processesFacility Maintenance and UtilizationKeep all production facilities in good repair, orderly, and cleanUse equipment to capacity to fill ordersSafetyEnsure all safety policies are enforced, all training is up to date, and all

Bay City, MI 48708 • (25.4 miles) • Full Time • 9/9/2026

Mersen is a global expert in electrical specialties and advanced materials for high-tech industries.Present in 33 countries with 50 industrial sites and 18 R&D centres, Mersen develops custom solutions and supplies key products to meet the new technological challenges that will shape tomorrow's world.For more than 130 years, Mersen has been constantly innovating to support and satisfy its customers' needs with the same high standards.Be it in wind power, solar power, electronics, electric vehicles, aeronautics, space or countless other sectors, wherever technology is progressing, you will always find a bit of Mersen.Main dutiesCoatings Process Operator Reports to Technical Supervisor - Fully participate in and support the Mersen Quality System.General Description: - The Technical Operator

Cass City, MI 48726 • (30.2 miles) • Full Time • 9/9/2026

OPEN POSITION:Position: Scheduling Coordinator I Department: Prior Authorization Location: Cass City, MI Hours: Full Time. Days. No Holidays. Full Benefits. Aspire Rural Health Systems is seeking a Scheduling Coordinator. We’re looking for individuals with a positive attitude to join our dedicated team of healthcare professionals committed to delivering the highest quality of service to both our patients and employees. REQUIREMENTS:High School Diploma or Associates Degree and or equivalent combination of education and experienceKnowledge of medical terminology and procedures at the level needed to perform responsibilitieUnderstand and be proficient in basic mathematical skills (division and multiplication; subtraction and addition), such as being able to calculate payer reimbursement and d

Auburn Hills, MI 48326 • (43.2 miles) • Full Time • 9/9/2026

TRIGO Global Quality Solutions has several immediate openings for Quality Inspectors in Auburn Hills. The rate of pay is $16 per hour.Overall Purpose of the Quality InspectorProvide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports toSite Supervisor/Site LeadersResponsibilities(To include but not limited to the following)Client Relationship & Business DevelopmentAct as an impartial third party between the production source and the customer facility to ensure the product meets set criteriaOperationsCheck/inspect manufactured parts or products for defectsRead and follow work instructions and general processesUse measuring or testing equipment as neededEnsure products meet quality standardsDi