Worcester, MA 01601 • (11.9 miles) • Full Time • 9/10/2026

Job Title: General Production WorkerPay $20Entry levelJob DescriptionThis role involves supporting production operations in an industrial environment by handling materials, preparing parts for powder coating and shot blasting, assisting machine operators, and maintaining a clean and safe work area. You will work on the production floor performing a variety of hands-on tasks that require attention to detail, adherence to safety procedures, and the ability to follow written and verbal instructions.ResponsibilitiesUnderstand and follow training related to personal protective equipment (PPE) required for each task.Lift materials and place hooks for powder coating and shot-blast operations using electric chain falls.Stand on a 47-inch high platform to guide assemblies onto load bars for powder

Milford, MA 01757 • (23.5 miles) • Full Time • 9/10/2026

Job Title: QC Analyst IIJob DescriptionThe QC Analyst II plays a key role in ensuring the quality and compliance of raw materials, in-process samples, stability samples, and finished products within a GMP-regulated environment. This position performs routine and complex analytical testing, supports method development and optimization, and maintains rigorous documentation to meet regulatory and quality standards. The role actively promotes safe laboratory practices and contributes to continuous improvement across quality control operations.ResponsibilitiesDemonstrate a strong commitment to laboratory safety, quality systems, and regulatory compliance in all daily operations.Support and promote a culture of safe laboratory practices by strictly following established environmental, health, an

Norton, MA • (44.7 miles) • Full Time • 9/10/2026

Job Title: Analyst II, Quality Control OperationsLocation: Norton, MADuration: 12 monthsPay Range: $40 - $44/hr. on w2Note: This position is onsite and will be primarily located in Norton, MA. There may occasional responsibilities at a secondary location in Cambridge, MA. Job Description:The Quality Control Technical Operations (QCO) Analyst II plays a role in supporting the department's efforts to maintain the highest standards of quality and compliance from development through to commercialization.In addition to executing routine and non-routine testing in support of development through commercial programs, the Analyst II may participate in data trending, investigations, and laboratory operations. This position may play a role in method transfers, method qualification/validation, verific

Shrewsbury, MA • (11.2 miles) • Full Time • 9/10/2026

Currently seeking a Production Operator for a full-time temporary to permanent position in Shrewsbury, MAResponsibilities of Production Operator:-Review and interpret batch sheets-Weight and mix chemicals following specifications listed-identify and filter materials into containers following process order instructions and apply correct labels-Calculate total quantity of materials used and lot numbers from individual, intermediates and letdowns-Enter and record various data points into systems-Perform quality control tasks on batches- Re-package materials into new containers-Operate forklifts to move materials throughout production floor.-Perform other related tasks as assignedRequirements of Production Operator-Minimum High School Diploma or GED-Previous Manufacturing Experience required,

Worcester, MA 01604 • (13.2 miles) • Full Time • 9/10/2026

Job Description:Performs sample retain discard per GMP procedures.Performs routine Environmental Monitoring testing within a GMP environment.Performs Environmental Monitoring (EM) during a fill operation.Supports other lab associated functions.Perform test methods as written to support product/material release.Effectively perform a multitude of laboratory techniques with minimal error for which they will be trained on.Understand, implement, and maintain GMP with respect to laboratory records, procedures, and systems in accordance with procedural requirements.Accept responsibility to complete assigned tasks as committed.Support investigation writers and approvers to gather data. effectively perform a multitude of laboratory techniques with minimal error for which they are or will be trained

Marlborough, MA 01752 • (13.2 miles) • Full Time • 9/10/2026

Job Title: Machine Operator II – 2nd ShiftPay Rate:1st Shift:$20/hour2nd Shift:$22/hourLocation:Marlborough, MA areaDuration:Long-term temporary assignment through 2/28/2027withpotential for extension based on business needsSchedule:Monday–Thursday, 3:30 PM–2:00 AM (4x10 schedule)Job SummaryWe are seeking an experiencedMachine Operator IIto support manufacturing operations in a regulated production environment. This position will be responsible for operating manufacturing equipment, monitoring production processes, maintaining accurate documentation, and ensuring products meet established quality and safety standards.Key ResponsibilitiesOperate manufacturing equipment in accordance with established procedures, specifications, and work instructions.Monitor equipment performance and maintain

Templeton, MA • (17.7 miles) • Full Time • 9/10/2026

Overview We are seeking a skilled and motivated Press Brake Operators to join our team in Templeton, MA. In this role, you will play a crucial part in our manufacturing process, ensuring precision and quality in the bending of metal components. If you have a keen eye for detail and a passion for working with machinery, we want to hear from you!Responsibilities Set up and operate press brake machines to bend and shape metal parts according to specifications.Read and interpret blueprints, drawings, and work orders to determine job requirements.Conduct regular inspections of machines and tools to ensure optimal performance and safety.Adjust machine settings as necessary to achieve desired tolerances and finishes.Collaborate with team members to meet production goals and deadlines.Maintain a c

Norwood, MA 02062 • (34.4 miles) • Full Time • 9/10/2026

My client is a top notch MEP Consulting Engineering firm that is actively seeking a Design Engineer with HVAC and Mechanical aptitude. Autocad and REVIT a plus. Seeking a 3+ year degreed Mechanical Engineer!Qualifications Bachelor’s degree in Mechanical Engineering or related field preferred2+ years of mechanical/HVAC design or engineering experienceProficiency in Revit MEP and AutoCADKnowledge of HVAC systems, equipment selection, and mechanical design principlesExperience developing construction documents and design drawingsFamiliarity with applicable building codes and industry standardsStrong analytical, problem-solving, and communication skillsAbility to collaborate effectively with engineers, architects, and project teamsEIT certification or PE license is a plusExperience with health

Norton, MA • (44.7 miles) • Full Time • 9/10/2026

R&D Partners is seeking to hire a Quality Control Analyst II in Norton, MA.Your main responsibilities as a Quality Control Analyst II:Perform routine and non-routine analytical assays, with increasing complexity, to support raw materials, in-process samples, product release, and stability studies, following established SOPsMaintain up-to-date training records, adhere to the testing schedule, and ensure the timely completion of all assignments to support the seamless operation of QC activities and uphold the department's commitment to meeting project timelines and quality metricsAssist in the maintenance of laboratory equipment and inventory, including the preparation of reagents and samples to ensure smooth laboratory operationsEnsure data is submitted timely; may qualify as a data reviewe

Wilmington, MA • (32 miles) • Full Time • 9/9/2026

Under direction of engineering and management you will perform a variety of technical and operations tasks of the electrical controls distribution and panel shop. You will support shipping/receiving, stocking activities; store and distribute supplies and equipment; maintain inventory, perform job kitting, control panel electro-mechanical assembly and wiring, test and configuration of related computer and industrial computer products. With engineering guidance you will learn to program and configure automation equipment such as PLC's, RTU's, Operator Interfaces, SCADA, and other related industrial and automation peripherals. You will keep shop and office area clean and organized and may serve as a co-worker or coordinator to other staff and perform related work as required.\nCompany Descrip

Boston, MA • (36.1 miles) • Full Time • 9/9/2026

Job Description:ITW Food Equipment Group LLC designs and manufactures commercial food equipment for food service and retail customers through its subsidiaries. The company’s products include ware washing equipment; cooking equipment, including ovens, ranges, and broilers; refrigeration equipment, including refrigerators, freezers, and prep tables; food processing equipment, including slicers, mixers, and scales; and kitchen exhaust, ventilation, and pollution control systems. ITW FEG has the largest service network in this industry to support our global customers, with highly specialized technicians and best-in-class supply chain procedures. The company was incorporated in 2001 and is based in Troy, Ohio. ITW Food Equipment Group LLC is an Illinois Tool Works Inc. subsidiary.SUMMARYService

Milford, NH • (26.5 miles) • Full Time • 9/9/2026

manufacturing engineer working in a machine shop knowing machining, N/C programing in Mastercam, solid works, open mind ( 5 axis programming ) writing job methods for turning,milling VTL's, we do large work 5000 lbs or more using over head cranes welding and fabricating, 650 ton press break, fancy geometry, waterjettingmostly prototypes, machining & fabricating stainless steels ( vacuum chambers )web page hollisline.com\nCompany Descriptionwe help customers develop new machines for the futureCompany Descriptionwe help customers develop new machines for the future

Fitzwilliam, NH 03447 • (29.1 miles) • Full Time • 9/9/2026

PLP Composites is seeking a skilled and motivated Craftsman to join our production team. This hands-on role is essential to the creation of our high-quality fiberglass poles, which are proudly handcrafted in New Hampshire and built to withstand the toughest environments.Position OverviewAs a Craftsman, you will be responsible for preparing, cutting, and assembling materials used in the production of fiberglass poles. You’ll work closely with a team to ensure every product meets our exacting quality standards.Key ResponsibilitiesGather and prepare materials required for fiberglass pole productionMeasure and cut materials accurately according to specificationsFollow detailed work instructions and production guidelinesMaintain a clean, organized, and safe work environmentInspect finished prod

Hyde Park, MA • (35.4 miles) • Full Time • 9/9/2026

Rooted in Tradition. Committed to Food Safety Excellence.The Food Safety Coordinator is a key member of our Compliance team and supports the daily implementation, monitoring, and continuous improvement of our Safe Quality Food (SQF) program and related compliance initiatives.This hands-on role combines program administration and documentation with an active presence in our warehouse. The Food Safety Coordinator will work closely with employees, managers, vendors, and auditors to ensure food safety requirements and company procedures are understood, followed, and consistently maintained. A key part of this role is partnering with operational teams to turn food safety requirements into practical day-to-day processes while building understanding, engagement, and consistent execution across th

Boston, MA • (36.1 miles) • Full Time • 9/9/2026

Pay: Starting at $17.00 per hourPosition SummaryThe cleaning staff is responsible for performing deep cleaning and maintaining assigned areas within a restaurant. Duties may vary, so flexibility and willingness to perform assigned tasks are required.Work ScheduleMust be available to work between 11:00 PM and 6:00 AM(Schedule may vary within this time range)Work LocationRestaurant is located in BostonTraining ProvidedWe offer on-the-job training. Internal supervisors will train employees on all cleaning procedures and the proper use of cleaning products.Essential DutiesThis position may include kitchen cleaning, front-of-house cleaning, or both.Kitchen CleaningClean kitchen equipmentRinse and sanitize floors and surfacesWash walls, shelves, and handlesPolish metal surfacesPerform any other

West Boylston, MA • (5 miles) • Full Time • 9/9/2026

Manufacturing Engineering Technician IWe re hiring a Manufacturing Engineering Technician for our client in the West Boylston, MA, area. This person will be responsible for assisting Manufacturing Engineers in executing daily manufacturing engineering activities in support of manufacturing operations within established quality systems, FDA regulations, and ISO standards. This individual may serve as an internal technical resource supporting assigned manufacturing work cells. The Manufacturing Engineering Technician will review, edit, and enter technical documentation into business systems while providing continuous improvement support for manufacturing documentation and processes.ResponsibilitiesUnder the direction of Manufacturing Engineering leadership, the Manufacturing Engineering Tech

Marlborough, MA 01752 • (13.2 miles) • Full Time • 9/9/2026

Job Title:R&DMechanicalEngineerDuration: 6+ Months (Possible extension)Location:ArdenHills, MN 55112 or Maple Grove, MN 55311 (Weaver Lake)Hybrid RoleResponsibilities:Will support integration of the acquired company’s Design History File (DHF) to compliance, with primary emphasis on design outputs, design verification prerequisite deliverables and execution, test method development and validation, technical problem-solving and issue resolution, and DHF documentation.Utilize your background inmechanicaland/or systems design, design verification, test method development and validation, verification testing, engineering documentation, and technical problem-solving.Successfully completing engineering work in one or more of the following: design outputs; design verification prerequisite deliver

Waltham, MA • (27.3 miles) • Full Time • 9/9/2026

Sr. Engineer - Process Development Primary Duties: The Sr. Engineer reports to Principal Engineer and is an integral part of mRNA Drug Substance Process Development team. This position offers opportunities to focus on mRNA drug substance process development, manufacturing, regulatory and analytical support, validation, and data review for drug substances and drug products. The Engineer is responsible for leading and assisting the development and execution of scalable and robust processes for drug substance. This position will act as a Subject Matter Expert (SME) for process knowledge transfer for drug substance to support current Good Manufacturing Practices (cGMP) manufacturing. Responsibilities include but are not limited to:40%Provide technical support for scale-up and manufacturing iss

Wilmington, MA 01887 • (32 miles) • Full Time • 9/9/2026

Job Title: Quality Technician & CMM ProgrammerJob Location:Wilmington, MAPay Rate $45-$50/hr on w2Client- Aerospace & DefenseDuration- 12 Months(Temp to Perm)Job Description:The Quality Technician & CMM Programmer (First Shift) is primarily responsible for programming, operating, and maintaining inspection programs for a Zeiss Contura G2 coordinate measuring machine (CMM) using ZEISS CALYPSO. Starting at 6:00 AM, this role supports multiple programs by developing, validating, and optimizing CMM inspection routines; interpreting engineering drawings and GD and documenting inspection results. The position also performs hands-on dimensional inspections, identifies nonconformances, and partners with Quality, Manufacturing, and Engineering to ensure product conformance and timely issue resoluti

Salem, NH 03079 • (37 miles) • Full Time • 9/9/2026

JOB SUMMARY: The Mechanical Assembler I performs basic mechanical tasks associated with assembling and integrating hardware components into PCB assemblies. This role is suited for individuals entering the manufacturing industry and offers a structured training environment to develop foundational assembly skills. ESSENTIAL DUTIES AND RESPONSIBILITIES Assemble mechanical parts such as brackets, fans, fasteners, and enclosures to PCBAs using standard tools. Follow assembly instructions, blueprints to complete basic builds.Conduct visual inspections for correct hardware placement and basic fit issues.Assist with packaging and labeling completed units.Adhere to ESD (Electrostatic Discharge) safety standards.Maintain cleanliness of workstation and comply with 6S practices. INTERNAL COMMUNICATION

Canton, MA • (37.8 miles) • Full Time • 9/9/2026

Machine Operator Canton, MAMachine Operator (D Shift)Pay: $22–$25/hour + 20% shift differentialSchedule: Thursday, Friday, Saturday & alternating WednesdayHours: 6:00 PM–6:00 AMLocation: Canton, MA 02021 Zing Recruiting is seeking an experienced Machine Operator to join a growing manufacturing team in Canton, Massachusetts. The Machine Operator will be responsible for safely operating production equipment, maintaining quality standards, supporting machine setup and changeovers, and ensuring efficient production. This is a great opportunity for a dependable manufacturing professional looking to grow with a strong team and develop their technical skills.Key Responsibilities Operate and monitor production machinery and equipment safely and efficiently.Set up, adjust, operate, and clean machin

Smithfield, RI 02917 • (39.1 miles) • Full Time • 9/9/2026

Locations: Based out of Smithfield, RI, service areas include Rhode Island and Bristol County, MACommercial Kitchen/Fryer Service Technician Day or Night ShiftLocation: Based out of Smithfield, RIEmployment Type: Full-timeHours: Guaranteed 40 hours per weekDay Shift Pay: $18/hour during paid training; $21/hour after trainingNight Shift Pay: $22/hour during paid training; $25/hour after trainingAbout UsSince 1996, Armor Lane Enterprises, Inc., an independently owned franchisee of Filta Environmental Kitchen Solutions, has provided commercial fryer service and deep kitchen cleaning to food-service operations throughout the region.Our customers include major sports venues, universities, hospitals, restaurants, and other commercial food-service facilities.We are currently hiring for one day-sh

Manchester, NH • (41.1 miles) • Full Time • 9/9/2026

Press Operator· $25-35/Hour based on Exp· Hooksett, NH· Monday – Friday, with OT opportunity· Third Shift, 11:30pm – 7:30am ‘What’s in it for you?Your skills deserve more than just a paycheck... they deserve an opportunity to grow!With $25–$35/hour based on experience, a steady Monday–Friday schedule, and OT available, this is a chance to put your mechanical know-how to work while building a long-term career in the printing industry. If you’re someone who likes working with your hands, solving problems, and seeing the results of your work, this could be the opportunity you’ve been waiting for!Why choose us?Check out our reviews on Google and see for yourself why people LOVE working with Express!Duties:· Operated heat-set web presses and related printing equipment safely and efficiently.· S

Devens, MA • (10.7 miles) • Full Time • 9/8/2026

JOB DESCRIPTION:Must Haves:• Associate degree required, or 1-3 years of relevant experience in a cGMP-regulated biotechnology or pharmaceutical manufacturing environment, or a related scientific or engineering field.• Must have the ability to work as a self-starter and manage multiple priorities in a dynamic, cross-functional, team-based environment.• High proficiency required in Microsoft Office applications, especially Word, Excel and PowerPoint.--Job Title: Manufacturing - Business Operations AssociateContingent Worker’s Work Location: Devens, MASupplier Note: Hello Everyone, manager requested additional resumes, she has provided feedback that she needs candidates to have more Manufacturing Operations experience and not primarily QC-focused experience. as this role will work closely wit

Billerica, MA • (27 miles) • Full Time • 9/8/2026

Job Title: Test Technician (Contract)The Test Executor will work as a key member of our multidisciplinary teams to test, set up testing infrastructure and maintain our robots. This role will support all aspects of robot operation (primarily indoor).This will include preparing robots for daily testing, operating video cameras, communicating with engineers and technicians about the status of the robots and setting up props for daily testing. There will be a strong labor component to this job.Day to day activities:Operating robots and making written or typed observations of performance.Communicating with engineers, following their instruction on how to run robot tests and reporting results via text and/or video.Set up test environments, including cameras, safety fencing, and pallets.Maintain

Baldwinville, MA 01436 • (19.7 miles) • Full Time • 9/7/2026

Sheet Metal Installers Wanted!We are currently looking for skilled Sheet Metal Installers to join our growing team! If you’re motivated, dependable, and ready to advance your career, we want to hear from you.Our company has proudly been in business for over 25 years, and we continue to grow by hiring talented professionals who take pride in their work. We offer opportunities in both residential and commercial projects, giving our team members the chance to expand their experience and skills.What You’ll DoInstall sheet metal systems in residential and commercial settingsPerform work including hanging, installing, wrapping, insulating, and other related tasksWork with a team to complete projects safely and efficientlyMaintain quality workmanship and professionalism on job sitesQualifications

Lowell, MA • (26.7 miles) • Full Time • 9/7/2026

We are a small, agile R&D-driven, and mission-oriented companyworking at the interface of engineering, biology and micro/nano-systems. We design and build advanced microsystems with real world impact: from In-vitro diagnostics to organ-on-a-chip platforms, to wearable sensors, to soft-robotic interfaces. If you thrive in a hands-on environment where you move quickly from concept to prototype to system, you will feel at home here.As our Microfabrication & Microfluidics Engineer, you will lead the design, fabrication and integration of next-generation microsystems including micro/nano fluidics and on-chip sensors. You will work across disciplinesmechanical, electrical, biological, microfluidicsand bring together clean-room fabrication, simulation, CAD design, sensor integration and system pa

Lawrence, MA • (35.9 miles) • Full Time • 9/7/2026

Have an eye for details others miss?If you have experience inspecting manufactured parts, reading specifications, and working with precision measuring tools, we want to hear from you.Asahi/America is looking for a Quality Control Technician to join our Lawrence manufacturing team. This is a hands-on position where you’ll spend a significant part of your day inspecting products and making sure what leaves our facility meets our quality standards and our customers’ expectations.What’s The Job?You’ll be on the manufacturing floor performing visual, dimensional, and functional inspections of thermoplastic valves, piping components, and other manufactured products. Using tools such as calipers, micrometers, and gauges, you’ll verify dimensions and specifications, document your findings, and ide

Smithfield, RI 02917 • (39.1 miles) • Full Time • 9/7/2026

CLIENT EXPERIENCE & SCHEDULING COORDINATORRoofMasters is seeking an organized, professional and highly responsive Client Experience & Scheduling Coordinator to manage new customer inquiries and create a smooth experience from the first phone call through the scheduled roof inspection.This is a key position within our company. You will be responsible for turning incoming inquiries into qualified appointments while ensuring every customer receives prompt communication and a clear next step.KEY RESPONSIBILITIESAnswer incoming calls, emails, website requests and text messagesRespond to new leads promptly and professionallyAsk qualifying questions and collect accurate project informationSchedule roofing inspections based on location, urgency and inspector availabilityConfirm appointments and fo

Andover, MA • (34 miles) • Full Time • 9/6/2026

About the Role:There is an immediate need for a Quality Control Inspector based out of our Andover, MA office that will report to our Quality Manager. The Quality Control Inspector will be responsible for testing and inspecting components and finished devices as defined by work instructions and/or engineering specifications. This role will also monitor critical equipment and instrumentation to ensure proper operation and calibration. Read more to see if this amazing opportunity is for you.What you'll do:Test and inspect components and finished devices as defined by work instructions and/or Engineering specifications.Report non-conformances.Monitor critical equipment and instrumentation to ensure proper operation and calibration.Inspect / test production components and subassemblies in acco

Canton, MA 02021 • (37.8 miles) • Full Time • 9/6/2026

The Production Technician is responsible for meeting departmental production, quality, and safety standards. Upon training within the department, the Production Technician will be responsible for independently reading and verifying the shop traveler, and setting up and completing the manufacturing process, which may include printing equipment, automated equipment, small hand tools, viewing product through a microscope, and fine assembly work.Duties and Responsibilities:Read and accurately understand the shop traveler (job order, instructions, and customer specifications)Set up and operate different types of machinery according to the department processes and each job’s requirementsConsistently evaluate product for quality, verifying departmental procedures are completed accuratelyRecord de

Lynn, MA 01906 • (38.8 miles) • Full Time • 9/6/2026

Benefits/PerksFlexible ScheduleCompetitive PayCareer AdvancementDescription/Job SummaryLXC Engineering group, an engineering firm, has an opening for an innovative Mechanical Engineer in our growing Massachusetts office. This position has excellent potential for motivated individuals interested in growing their technical and management expertise within mechanical and sustainability and developing their leadership abilities.Job Description The Mechanical Engineer will perform engineering calculations and prepare detailed mechanical engineering drawings for HVAC, Plumbing, and Fire Protection design for buildings primarily within the higher education, science and technology, utility, data center, cannabis, manufacture, industrial, and healthcare market sectors. The Sr. Mechanical Engineer wi

Manchester, NH • (41.1 miles) • Full Time • 9/6/2026

Sheet Metal Installer Wanted!We are a looking for a Sheet Metal Installer to help our company grow while using your skills to advance with us. We have been in business for over 25 years and still going! We have several job opportunities available from residential and commercial work, hanging, installing, wrapping, insulating, and more! Apply here to discuss more about how we can help better your career path.We offer employees– Competitive Pay– Holiday Pay– Medical, Dental, and Vision– 401k with Company Match– Tool Reimbursement– Tuition Reimbursement– AND MORE...!!!Ask us how to earn a $250 referral bonus!

Sturbridge, MA • (28.2 miles) • Full Time • 9/6/2026

Join a USA Today Top Workplace!Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third-generation, family-owned business dedicated to helping manufacturers improve productivity and stay competitive.About this Role:We are hiring Field Service Technicians to support and service advanced industrial equipment, including CNC machine tools. No prior CNC experience is required. We actively hire and train experienced technicians from related industries such as:- Commercial HVAC- Industrial electrical or low voltage electrical- Diesel / heavy equipment- Field service / industrial maintenance- Aircraft mechanicsIf you have strong troubleshooting skills and experience working on complex mechanical and electrical systems, we will train you to become an ex

Putnam, CT • (37.1 miles) • Full Time • 9/6/2026

POSITION SUMMARY: This position will perform prototype duties with a particular expertise in manufacturing and fabrication.ESSENTIAL FUNCTIONS:Use manufacturing paperwork (travelers, blueprints, sketches, etc.) to:- Prototype a product to meet customer and quality requirementsPrototype tooling and/or fixtures required to manufacture productPerform a prototype review on existing products for cost reduction and/or prototype changesMeet time and schedule standards for assigned tasksKeep equipment clean and maintain proper operating standardsAdvise supervision of issues that ariseMake routine decisions and use problem solving to resolve basic manufacturing issues or seek assistanceCommunicate effectively with other employees to direct personal workflowIdentify set-up reduction opportunities an

Manchester, NH • (41.1 miles) • Full Time • 9/6/2026

Overview We are seeking a talented and motivated CNC Programmer to join our dynamic team in Manchester, NH. In this role, you will play a crucial part in enhancing our manufacturing processes and ensuring precision in our machining operations. If you have a passion for programming and a knack for manufacturing engineering, we want to hear from you!Responsibilities Program Multi-axis CNC machines using Mastercam to produce high-precision components.Design and implement efficient manufacturing processes to improve productivity and quality.Set up and operate CNC machines, ensuring adherence to specifications and tolerances (primarily Fanuc controllers).Collaborate with cross-functional teams to troubleshoot and resolve manufacturing issues.Analyze production data and metrics to identify areas

Boston, MA • (36.1 miles) • Full Time • 9/5/2026

Role DescriptionThis is a full-time on-site role for a Sheet Metal Master License holder in Boston, MA. The individual will be responsible for leading sheet metal installation projects, interpreting blueprints and technical drawings, ensuring compliance with industry standards and regulations, and performing quality control checks. Daily tasks also include supervising and mentoring junior technicians, maintaining project timelines, and collaborating with other team members to achieve project goals. Additionally, the role involves troubleshooting and resolving any issues that may arise during the installation process. QualificationsProficiency in interpreting blueprints and technical drawings related to sheet metal workExperience with sheet metal installation and manufacturing processesKnow

Marlborough, MA • (13.2 miles) • Full Time • 9/5/2026

Willing to Train!2nd shift- 3 pm- 11:30 pm (10% Shift Differential)IPG Medical Corporation is focused on developing next-generation medical products based on its state-of-the-art technology. Headquartered in Marlborough, MA, we aspire to work together with our employees and customers to apply light in ways that improve life.Our mission is to develop innovative medical device laser solutions that make the world a better place. To accomplish this mission, we are committed to attracting and retaining the best talent and an engaged and thriving workforce that drives a sustainable future for our company and society.Working at IPG Medical Group you can expect challenging projects, a motivating and friendly environment, and competitive benefits.Entry level position preparing fibers for medical su

Charlton, MA 01507 • (23.4 miles) • Full Time • 9/5/2026

This position is a DIRECT HIRE ROLE from day oneThe ideal candidate will have hands-on experience operating and programming CNC lathes and/or milling machines, working with a variety of metals, and interpreting technical drawings and blueprintsResponsibilitiesSet up, program, and operate CNC lathes and/or milling machines.Manufacture machined tooling and machined weldments to specifications.Work with aluminum, stainless steel, and carbon steel materials.Read and interpret blueprints, sketches, and engineering drawings.Perform inspections using precision measuring instruments, including calipers, verniers, and micrometers.Ensure parts meet quality and dimensional requirements.Troubleshoot machining issues and make programming or setup adjustments as needed.QualificationsPrevious experience

Milford, NH 03055 • (26.5 miles) • Full Time • 9/5/2026

Job Title: TechnicianShift: Mon-Fri 6:30am-2:30pmPOSITION SUMMARY:This position maintains the quality and efficient operation of molding machines and finished products. The role may also assist with building molds and operating molding machines as needed.ESSENTIAL DUTIES AND RESPONSIBILITIES:• Review part folders for special instruction, quality alerts, special tooling etc.• Set up machines per molding schedule, loading molds into machines• Perform first piece inspections• Process machines as needed to meet quality standards• Run molding machine• Work with schedule to find out what will be run next and what is unavailable• Machine maintenance as needed• Work on preventative maintenance as required• Build tools into mold bases• Maintain a clean and safe work environment• Other duties and re

Walpole, MA 02081 • (33.2 miles) • Full Time • 9/5/2026

Revelare Kitchens is a growing leader in residential kitchen remodeling, deliveringhigh-quality kitchen sales and installations for existing homes across multiple states. We areseeking a driven and detail-oriented Branch Production Manager to oversee daily production operations at the local level and ensure exceptional project execution and customer satisfaction.About the Role:The Branch Production Manager is responsible for coordinating and managing all aspectsof installation scheduling, field operations, and customer experience within their branch. Thisrole serves as the key link between installers, customers, and internal teamsensuring projectsare completed efficiently, professionally, and to company standards.Key Responsibilities: Schedule and coordinate kitchen installation projects O