Newton Upper Falls, MA 02464 • (2.8 miles) • Full Time • 10/18/2026

Position Summary The CNC Machinist I Produces machined parts by operating a computer numerical control (CNC) machine; maintaining quality and safety standards; keeping records; maintaining equipment and supplies. The role requires the above to be accomplished within Tecomet's principles of continuous improvement, customer driven innovation and a win first culture, while meeting company financial and other performance metrics. Principle Responsibilities Operate CNC machines within specified tolerances following work instructions and in accordance with machine programs and engineering drawings. Change dull tooling, and/or make minor offsets and adjustments as needed for tooling wear. Ensure product quality is achieved by working to operator owned quality (OOQ) standards and requirements incl

Providence, RI 02912 • (32 miles) • Full Time • $42.87 / hr • 10/18/2026

The HVAC & HVAC Controls Technician is responsible for the installation, operation, maintenance, troubleshooting, and repair of heating, ventilation, air conditioning, and building automation/control systems. This role supports the safe, efficient, and reliable operation of HVAC systems across assigned facilities, with a strong emphasis on controls, energy efficiency, and occupant comfort. Benefit Information: ABM offers a comprehensive benefits package. For information about ABM’s benefits, visit Pay: $42.87 an hour The pay listed is the pay range for this position. Any specific offer will vary based on the successful applicant’s education, experience, skills, abilities, geographic location, and alignment with market data. A good job for someone just entering the workforce or

Lowell, MA 01854 • (26.2 miles) • Full Time • $20.00 to $27.00 / hr • 10/27/2026

A commitment to care. A legacy of compassion. This is D'Youville. Since 1960, D’Youville Life & Wellness Community (DLWC) has provided Greater Lowell and surrounding communities with Faith-Based, Nonprofit, Short-Term Rehabilitation and Skilled Geriatric Care earning the respect of its peers and the trust of the community at large. We are seeking to hire a Quality Assurance Technician . $20 to $27 per hour based on skills and experience. Full-Time variable schedule including evenings and overnight shifts. Quality Assurance Technician Introduction: This role supports the facility's Quality Assurance and Performance Improvement (QAPI) and regulatory compliance efforts through continuous, proactive monitoring of resident care areas, clinical practices, medication and treatment systems,

Braintree, MA 02184 • (13.3 miles) • Full Time • 10/22/2026

Wollaston Alloys/CPP Boston is seeking a Quality Control Inspector to join our team! This is an excellent opportunity for an experienced individual to join a fast-paced company that has continued to grow over the past 60 years! CPP offers a competitive compensation and benefits package, which includes medical/dental/vision/life/disability insurance, 401K with match, paid vacation and holidays, paid training, and a great team culture! Responsibilities Inspect castings visually utilizing various measuring devices and prints as required. Perform various coding, marking, stamping for proper processing Subject castings to various testing methods as required (pressure testing, magnetic particle testing, bubble testing, etc.). Perform necessary record keeping duties as required. Prepare scrap rep

Lynnfield, MA 01940 • (20.6 miles) • Full Time • $22.00 / hr • 10/24/2026

Through our dedicated associates, Conduent delivers mission-critical services and solutions on behalf of Fortune 100 companies and over 500 governments - creating exceptional outcomes for our clients and the millions of people who count on them. You have an opportunity to personally thrive, make a difference and be part of a culture where individuality is noticed and valued every day. Onsite Print Operator Pay: $22.00 per hour - please note this rate may be below your state’s minimum wage. Consider this when applying . Schedule: Monday-Friday | 3:00 PM - 11:30 PM EST - No Weekends! Location: Lynnfield, MA Position Summary As a member of the team, the Print Operator is responsible for processing healthcare documents, printing checks and transaction statements, performing quality contr

Bedford, MA 01730 • (15.3 miles) • Full Time • 10/25/2026

JOB DESCRIPTION As an Airside Experience Specialist , you are the face of our private aviation terminal, delivering a seamless, personalized, and welcoming experience for every guest, crew member, and aircraft in our care. In this dynamic role, you'll combine exceptional hospitality with hands-on operational support to ensure our guests feel cared for, from wheels down to wheels up. You’ll operate ground service equipment and perform aircraft ground services while engaging guests with professionalism and a service-first mindset . This role requires schedule flexibility, including nights, weekends and holidays, and the ability to thrive in outdoor environments around active aircraft and in varying weather conditions. If you enjoy creating memorable guest experiences in a fast-paced, l

Haverhill, MA 01832 • (35.6 miles) • Full Time • 10/18/2026

ProAmpac is hiring! This position is onsite at our Haverhill, Massachusetts plant. Shift: Rotating 2:2:3 7:00pm - 7:00am Essential Duties and Tasks To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. Reasonable accommodations may be made, upon request, to enable individuals with disabilities to perform the essential functions. Safley sets up, operates, and monitors extrusion machinery and equipment as intended and needed to meet customer and production goals. Completes extrusion machine setup for production runs, including loading materials, adjusting settings, and calibrating equipement to ensure proper operation. Monitors the production process, inspects and tests materials and equipment using safe and proper protocols, to e

Needham, MA 02492 • (0.5 miles) • Full Time • $41.25 / hr • 10/23/2026

Overview: Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. Factory Location: Framingham, MA Compensation: $41.25 / hour to start with $.50 increases at 90 and 180 days with successful review Shift differential: 6%-8% of base hourly rate paid for applicable hours worked Schedule: 10:00 pm - 6:30 am; Sunday - Thursday Ability to work holidays and weekends per business needs Benefits of working for Primo Brands: Health Benefits: Medical, prescription, dental, vision, flexible spending account (FSA), dependent care flexible spending account (FSA,

Holbrook, MA 02343 • (14.9 miles) • Full Time • 10/18/2026

ProAmpac is a leading global flexible packaging manufacturing company. Our Holbrook, MA facility is looking to add a Machine Operator - Converting to our team. Shift: Monday - Friday 6:00am - 2:00pm. Essential Duties and Tasks: To perform this job successfully, an individual must be able to perform each essential job function satisfactorily. Reasonable accommodation may be made, upon request, to enable individuals with disabilities to perform the essential functions. Safley sets up, operates, and monitors converting machinery and equipment as intended and needed to meet customer and production goals. Completes converting machine setup for production runs, including loading materials, adjusting settings, and calibrating equipment to ensure proper operation. Monitors the production process,

Lawrence, MA 01842 • (31 miles) • Full Time • 10/18/2026

JD Edwards Application Development Manager Lawrence, MA A manufacturing and distribution company in Lawrence, Massachusetts is hiring an Application Development Manager to lead the design, development, and support of its business-critical applications, including its JD Edwards ERP platform and other internal systems. This is a leadership role responsible for managing a team of developers, setting priorities, coaching talent, and aligning technology solutions with business goals. The role owns the full application lifecycle and maintains fiscal accountability for development projects and tools. Schedule Full-time, onsite in Lawrence, MA. Remote or hybrid eligibility to be confirmed with the employer. Compensation Salary commensurate with experience. Pay range to be confirmed with the employ

Waltham, MA 02453 • (6.4 miles) • Full Time • $23.00 to $24.00 / hr • 10/27/2026

Job Title: Production Test Technician I Location:Waltham, MA 02453 Duration: 06 Months Qualifications: High School Degree or Equivalent Typically requires 0 - 1 year of related experience. Responsibilities: This is an entry-level Production Test Technician position that performs calibration set-up, mechanical assembly, testing instruments and performing Final QC on completed assemblies. Candidate will follow manufacturing procedures per documentation. May also perform rework on assemblies as needed. Job Duties Perform electro-mechanical assembly functions on hand-held analyzers. Calibrate electronic devices per customer orders. Utilize hand tools and test devices. Follow standardized/documented procedures to ensure product meets high quality standards. Complete work orders on schedule and

Waltham, MA 02453 • (6.4 miles) • Full Time • $24.00 / hr • 10/27/2026

Job Summary We are seeking a detail-oriented Assembler II to perform mechanical and electro-mechanical assembly of components and finished products. The ideal candidate will have manufacturing experience, strong manual dexterity, and the ability to follow blueprints, quality standards, and production procedures in a fast-paced environment. Key Responsibilities Assemble mechanical and electro-mechanical components, subassemblies, and finished products. Perform wiring, soldering, cable assembly, component installation, bonding, potting, and fitting operations. Operate manufacturing equipment used in ultrasound transducer production. Follow blueprints, work instructions, and quality specifications. Complete work orders accurately and meet production targets and standard times. Record labor tr

Boston, MA • (8.7 miles) • Full Time • 10/27/2026

About SimpliSafe We're a high-tech home security company that's passionate about protecting the life you've built and our mission of keeping Every Home Secure. And we've created a culture here that cares just as deeply about the career you're building. Ours is a no ego culture of collaboration and innovation where those seeking their next challenge can find big opportunities and make a huge impact on the lives of all those who we protect. We don't just want you to work here. We want you to grow and thrive here. We're embracing a hybrid work model that enables our teams to split their time between office and home. Hybrid for us means we expect our teams to come together in our state-of-the-art office on two core days, typically Tuesday, Wednesday, or Thursday – working together in person an

Boston, MA 02127 • (11.2 miles) • Full Time • 10/27/2026

Tatte began with a simple belief: great food has the power to bring people together. What started in a home kitchen has grown into a collection of bakeries and cafs inspired by Eastern Mediterranean and Levant traditions, where handcrafted food, exceptional coffee, warm hospitality, and beautiful spaces create moments of connection every day. Our mission is simple: To Inspire, Care For, and Nurture Life. Every Day. THE ROLE As a Bakery Production Team Member, you will help create our unique pastries, cakes, pies, breads, and treats from scratch using high-quality ingredients. You will identify and select ingredients, prepare, form, and bake items within our pastry, bread, or Viennoiserie departments. Our bakery production team members thrive in a fast-paced, team-oriented environment while

Woburn, MA • (15.3 miles) • Full Time • 10/27/2026

Quality Control Inspector - Contract To Hire We are seeking a Quality Control Inspector in the area of Woburn, MA. This role is essential for ensuring the quality of electronic assemblies and components, contributing to a company known for its commitment to excellence in manufacturing. Shift of the Quality Control Inspector: 8:00AM - 4:30PM Pay Rate/Salary of the Quality Control Inspector: $27 - $30 Responsibilities of the Quality Control Inspector: Conduct incoming inspections of electronic assemblies and components against engineering drawings. Utilize tools such as microscopes and multimeters for quality inspections. Identify and segregate non-conforming parts for review. Maintain accurate records and documentation as per quality management standards. Collaborate effectively with team m

Franklin, MA 02038 • (15.7 miles) • Full Time • $75,000 to $95,000 / yr • 10/27/2026

**What makes us strong? ** Our employees in 50 countries worldwide – all working with passion to enable high-tech applications with our strong metals: tungsten and molybdenum. At our Plansee site in Franklin, USA, we specialize in transforming semi-finished molybdenum and tungsten products into complex componentsleveraging decades of precision manufacturing and engineering excellence. Join a highly motivated team in Franklin, USA, where local expertise meets the global knowledge and values of the Plansee Group. Specific Responsibilities: Lead cross functional teams in the investigation and troubleshooting of product and/or production issues. Develop and implement effective corrective actions, solutions, and improvements. Support Operations by developing and implementing quality standards,

Burlington, MA 01803 • (15.8 miles) • Full Time • 10/27/2026

Job Description At Vericel Corporation, we are pioneers in advanced cell therapies for sports medicine and severe burn care, transforming patient lives through cutting-edge regenerative medicine. Our commitment to innovation, patient-centered focus, and scientific excellence drives us to develop groundbreaking treatments including MACI (knee cartilage repair), Epicel and Nexobrid (burn care). Position Summary: The Quality Control Analyst I is responsible for performing routine testing of raw materials, in-process, drug product (DP) and stability samples within the QC laboratory in accordance with SOPs for product release and validation. Schedule: This position is onsite Sunday - Thursday in our new Burlington, MA office, but will be required to spend some days in our Cambridge office as we

Acton, MA 01720 • (17.4 miles) • Full Time • $30.00 / hr • 10/27/2026

Job Title: R&D Assembly Technician Location: Acton, MA(01720) Duration: 12+Months Pay: $30/hr (W2 All Inclusive) Shifts: 8am - 5pm (Mon to Fri) Position Overview The R&D Assembly Technician is a hands-on, contract role supporting the development and assembly of medical devices. This position will support the execution of early-stage R&D manufacturing builds, working with both manual and semi-automated equipment to assemble intricate, small-scale components. The ideal candidate brings a technical mindset, attention to detail, and a willingness to learn and contribute in a fast-paced, collaborative environment. Responsibilities: Perform manual and semi-automated assembly of small, intricate components for early-stage R&D builds Operate and maintain basic manufacturing and inspection equipmen

Billerica, MA • (19.6 miles) • Full Time • $50.00 to $54.00 / hr • 10/27/2026

Job Title: Sr Supplier Qual Engineer Location: Billerica, MA (Fully Onsite) Duration: 6 Months, with potential extension Schedule: 40 hours/week Job Description: We are seeking a Senior Supplier Quality Engineer with medical device industry experience to support Sphere-9 Catheter Production. The role involves supplier qualification, product/component qualification, validation, and ensuring compliance with quality standards. Key Responsibilities: Qualify suppliers and ensure product/component quality. Lead product acceptance strategies and incoming inspection activities. Perform Test Method Validation (TMV), equipment validation, and process validation. Manage supplier change requests, nonconformances (NCMRs), and CAPA. Support Approved Supplier List (ASL) activities and supplier performanc

Wilmington, MA 01887 • (20.1 miles) • Full Time • $36.00 to $41.00 / hr • 10/27/2026

CNC Programmer (Mastercam) Wilmington, MA $36.00 - $41.00/hr DOE 1st Shift | Monday-Friday | 8:30 AM-5:00 PM Type: 1099 Independent Contractor – FullTime Opportunity Requirements MUST pass, background, drug test to start If you’d like to be considered for this opportunity, you’re welcome to express interest. Participation is completely optional, and contractors may choose this shift if it aligns with their availability. Contract-to-Hire | Direct Hire Considered Why Apply? Competitive pay up to $41/hr Opportunity for permanent employment Work on prototype and production machining projects Hands-on programming, setup, and process improvement role Collaborative engineering and manufacturing environment Responsibilities Create and optimize CNC programs using Mastercam Setup and operate CNC mil

Littleton, MA 01460 • (21.8 miles) • Full Time • 10/27/2026

We are seeking a Small Engine Mechanic to repair lawn and garden equipment across mixed brands and engine types. This role focuses on engine repair within a walk-in customer service workflow and includes limited technical handoff to customers. Responsibilities Repair engines used in lawn and garden equipment. Service equipment across mixed brands and engine types. Diagnose engine issues and troubleshoot equipment problems. Perform carburetor tuning as needed. Support walk-in customer service through limited technical handoff. Preferred Qualifications Entry-level experience in small engine repair. High school diploma or equivalent. Knowledge of small engine repair, engine diagnostics, carburetor tuning, and troubleshooting.

Attleboro, MA 02703 • (24 miles) • Full Time • $26.00 to $28.00 / hr • 10/27/2026

CNC Machinist Pay: $26–$28 per hour Shift: 1st Shift Schedule: Approximately 45 hours per week; overtime required Experience: 1–3 years of CNC machining experience Position Overview We are seeking a dependable CNC Machinist to join a tool and die shop. The ideal candidate will have 1–3 years of machining experience, preferably in a job shop environment, with hands-on experience setting up and operating CNC mills and lathes. This position offers an opportunity to work on a variety of machining projects while developing additional skills, including wire electrical discharge machining (EDM). Responsibilities Set up and operate CNC mills and lathes. Read and interpret blueprints, drawings, and machining specifications. Perform machine setups and make adjustments as needed. Inspect finished par

Beverly, MA 01915 • (28 miles) • Full Time • $18.50 / hr • 10/27/2026

Team Members At CAVA, we make it deliciously simple to eat well and feel good every day. We are guided by a Mediterranean heritage that’s been perfecting how to eat and live for four thousand years. We prioritize authenticity, curiosity and the pursuit of excellence in everything we do. We are working towards something big, together. We foster a culture built on five core values: Generosity First, Always: We lead with kindness. Our best work happens when we act in service of others. Constant Curiosity: We are eager to learn, grow, and explore beyond the obvious. Act with Agility: We welcome change; it’s the only constant. We embrace, adjust, adapt. Passion for Positivity: We greet each day with warmth and possibility. Collective Ambition: We have high aspirations that are achieved when we

West Boylston, MA 01583 • (28.4 miles) • Full Time • $20.00 to $22.00 / hr • 10/27/2026

Electromechanical Assembler Location: West Boylston, MA | Onsite Pay: $20 – $22/hour Schedule: Full-Time | 1st or 2nd Shift Employment Type: Ongoing Contract About the Role Have experience in production, manufacturing, or general assembly? You may be a great fit! No previous electromechanical assembly experience is needed. Training is provided. We are hiring Electromechanical Assemblers in West Boylston, MA! If you enjoy hands-on work, using tools, and putting things together, this is a great opportunity to learn new skills while building electrical and mechanical products. You'll work with a small production team to assemble electrical panels, boxes, and mechanical components using hand tools and step-by-step instructions. Available Shifts 1st Shift: 7:00 AM – 3:30 PM 2nd Shift: 3:00 PM –

Smithfield, RI 02917 • (29.3 miles) • Full Time • $25.00 / hr • 10/27/2026

TOWN OF SMITHFIELD | RHODE ISLAND Department of Planning & Economic Development GENERAL SUMMARY The Planning Services Coordinator is the Department’s principal administrative and procedural support position, responsible for the day-to-day production, coordination, and maintenance of development application records, public meeting materials, required notices, official filings, and other departmental documentation. The position supports the Director and Assistant Planning Director (Principal Planner) by ensuring that established planning and development review processes are consistently administered. The position coordinates application intake, board and commission meeting preparation, procedural tracking, records management, public inquiries, and the Department’s electronic permitting and i

Leominster, MA 01453 • (31.5 miles) • Full Time • $85,000 to $105,000 / yr • 10/27/2026

- Layout, install, maintain and troubleshoot electrical equipment such as lighting and motor controls - Wire fairly complicated circuits - Diagnose and remedy electrical trouble on all equipment, using wiring diagrams, control ladders and PLC’s - Mechanical troubleshooting and repair skills, including hydraulics and pneumatics - Layout and perform difficult machining operations, fabricate and weld - Diagnose and remedy machinery problems, including tearing down and reassembling machines - Devise, develop and construct tools and mechanisms - Involves considerable development work, skilled fitting, timing and adjusting Requirements: - Understand for hydraulic and pneumatic circuits - Strong electrical skills, including DC and single- and 3-phase AC installation and troubleshooting - Understa

Salem, NH 03079 • (35.5 miles) • Full Time • 10/27/2026

Electrical Engineer – EV, DER & BESS System Summary SAI’s Energy Services group delivers industry-leading engineering solutions for EV infrastructure and distributed energy resources. As we continue to scale, we are expanding our capabilities to support larger, next-generation energy projects. This role will contribute directly to that growth and help shape the future of our engineering team. This role will join a high-performing engineering group and contribute directly to active project execution, while also helping enhance and evolve the tools, processes, and standards that support SAI’s continued growth. The position offers the opportunity to work on advanced electrical designs, collaborate with experienced engineers and external partners, and play a meaningful role in strengthening a

Cranston, RI 02920 • (37 miles) • Full Time • $18.00 / hr • 10/27/2026

Team Members At CAVA, we make it deliciously simple to eat well and feel good every day. We are guided by a Mediterranean heritage that’s been perfecting how to eat and live for four thousand years. We prioritize authenticity, curiosity and the pursuit of excellence in everything we do. We are working towards something big, together. We foster a culture built on five core values: Generosity First, Always: We lead with kindness. Our best work happens when we act in service of others. Constant Curiosity: We are eager to learn, grow, and explore beyond the obvious. Act with Agility: We welcome change; it’s the only constant. We embrace, adjust, adapt. Passion for Positivity: We greet each day with warmth and possibility. Collective Ambition: We have high aspirations that are achieved when we

Warwick, RI • (40.6 miles) • Full Time • $25.00 to $34.00 / hr • 10/27/2026

Full job description The primary responsibilities of this position include, but are not limited to the following: · Repair equipment and machinery as they arise to get production back up running as soon as possible · Adjust equipment setting to ensure perfect production quality (includes some programming) · Ability to understand and interpret electrical and mechanical prints, drawings and schematics and execute and complete maintenance service instructions. · Assist with development of Maintenance procedures (SOP’s) for machine operator and maintenance technician. · Perform preventative and planned maintenance to control downtime on all equipment and machinery. Perform routine scheduled maintenance during downtime · Lead of new machinery and equipment implementation. · Industrial Mechanic

Southbridge, MA 01550 • (43.1 miles) • Full Time • $30.00 to $38.00 / hr • 10/27/2026

Your Contribution Assist with the development and implementation of new products, processes, equipment, and controls. Prepare and executes design sheets for drawing fiber optic material made from various glass components. Operate various complex equipment including drawing, fusing, finishing, polishing, and inspection equipment. Coordinate experiments, compiles data, documents results, and writes technical reports. Prepare process documentation for newly developed products and processes. Participate in manufacturing engineering task force meetings to ensure effective transfer of technology to Manufacturing. May require some travel domestic and international including customer and internal meeting and conferences. Your Profile High school diploma or equivalent. A.S. degree in Engineering, A

Woburn, MA • (15.3 miles) • Full Time • $30.00 to $42.00 / hr • 10/26/2026

We are currently looking for skilled Sheet Metal Installers to join our growing team! If you’re motivated, dependable, and ready to advance your career, we want to hear from you. Our company has proudly been in business for over 25 years , and we continue to grow by hiring talented professionals who take pride in their work. We offer opportunities in both residential and commercial projects , giving our team members the chance to expand their experience and skills. What You’ll Do Install sheet metal systems in residential and commercial settings Perform work including hanging, installing, wrapping, insulating , and other related tasks Work with a team to complete projects safely and efficiently Maintain quality workmanship and professionalism on job sites Qualifications Experience with com

Shrewsbury, MA 01545 • (24.1 miles) • Full Time • 10/26/2026

Description: The CNC Operator is responsible for the safe, accurate, and efficient operation of CNC equipment used to fabricate custom trade show exhibits and experiential environments. This position works closely with the Shop Foreman, CAD team, and production teams to ensure components are produced accurately, on time, and to Elevation3D quality standards. Requirements: Responsibilities: Program, set up and operate CNC equipment according to approved drawings and production files. Review drawings, cut files, materials, and specifications prior to production. Select appropriate tooling and machine settings for each job. Verify dimensions and quality of completed components. Work with CAD and Shop leadership to resolve production or file-related issues. Prioritize CNC work based on product

Norwood, MA • (6.7 miles) • Full Time • 10/26/2026

Looking for an exciting career? Want to join an amazing company who is experiencing tremendous growth and opportunities? Affinity Recruiting is looking for an experienced Quality Engineer for an amazing and growing company in Norwood, MA! Competitive salary commensurate with experience with an amazing benefits package! M-F, day schedule! Knowledge and skills: Must be an excellent problem solver and competent in performing root cause analysis. Experience with LEAN and six sigma programs. Knowledge of inspection control methods, techniques, and documentation. Experience with failure modes, Effects Analysis (FMEA). Experience with AS9102, MIL-STD-1916, ANSI-ASME 14.5M. Able to use hand-held measuring tools and CMM (in programming) Strong knowledge of Microsoft Office applications. Knowledge o

Brighton, MA 02135 • (6.9 miles) • Full Time • $23.00 to $28.00 / hr • 10/26/2026

Electro-Mechanical Assembly Technician Technician will perform functions associated with all manufacturing operations, including incoming inspection of parts, assembly, debug, setup and alignment of production components, subassemblies and final assemblies. Uses mechanical measurement devices to collect and evaluate data to determine parts meet specifications. Follows verbal/written procedures developed by engineering. Assemble, verify, adjust, medium to complex electro-mechanical sub-assemblies. Technician will be asked to support production in a wide variety of needs. Requirements: - Fabricate and prep parts for mechanical/electronic assemblies, perform manual assembly of electronic and mechanical components. - Follow manufacturing and assembly procedures. - Run production tests on equip

Watertown, MA 02472 • (7.3 miles) • Full Time • 10/26/2026

Reporting: Associate Director, Quality Assurance Description : We are seeking an experienced Senior Quality Assurance Specialist, to join Mariana’s Quality Assurance organization, advancing personalized medicine and radiopharmaceuticals. The Senior QA Specialist plays a critical role in ensuring that radiopharmaceutical products are manufactured, tested, and released in full compliance with cGMP, radiation safety regulations, and applicable global quality standards. This position provides QA oversight to daily operations, supports batch review and release, manages deviations and CAPAs, and partners closely with manufacturing, QC, manufacturing sciences & technology, and radiological safety teams to maintain a robust, inspection-ready quality culture. Illustrative Breadth of Responsibilitie

Canton, MA • (9.2 miles) • Full Time • 10/26/2026

Zing Recruiting, in partnership with a leading manufacturing company, is seeking to hire an experienced Machine Operator to join a dynamic team in the Canton, MA area. This role operates on A shift, which includes Monday, Tuesday, Wednesday, and every other Thursday from 6 PM to 6 AM. Key Responsibilities: Operate and support aPLC-controlled 120-inch wide tandem flexible PVC extrusion coating line. Manage the setup, operation, breakdown, and cleaning of all machine components, while developing optimal processing parameters to enhance line speeds and yields. Safely operate forklifts to transport materials to designated workstations. Conduct thorough quality reviews of products at assigned workstations. Adhere to all company policies, including environmental policies, and promptly report any

Cambridge, MA 02142 • (10.2 miles) • Full Time • 10/26/2026

Lumina Corp is building a visible-light photonic integrated circuit (PIC) platform, bringing high-performance modulators and related devices from lab to product. We’re looking for a Photonics Fabrication and Test Engineer who can turn device concepts into repeatable, high-yield fabrication flows and continuously improve them. This is a hands-on role spanning process development, integration, metrology, and yield, working closely with design and test to close the loop fast. What you’ll do Develop, own, and improve end-to-end photonics process flows (process integration, recipe development, yield improvement) Run and refine core cleanroom steps (as applicable): lithography (photo/e-beam), etch (RIE/ICP), deposition (PECVD/Thermal Evap), lift-off, cleaning, anneals Establish robust process wi

Somerville, MA • (10.8 miles) • Full Time • $80,000 to $100,000 / yr • 10/26/2026

Location: Somerville, MA Senior Mechanical Engineer – Medical Device Overview: Micro-Leads is a fast-paced early-stage company developing an injectable medical device to treat people with chronic pain with greater efficacy. Our company has extensive expertise in precision implantable medical devices for nerve stimulation and neuromodulation. Role Summary: The primary role of this position is to design and build injectable electrodes for needle delivery and implantable pulse generator housings for next-generation neurostimulator devices. The individual will design electrodes for stimulation and nerve recordings. In addition, the candidate will prototype, build, and conduct mechanical integrity and related tests. The individual will also develop manufacturing processes and work with vendors

Boston, MA 02210 • (11.6 miles) • Full Time • 10/26/2026

Company Description We are a stealth mode startup in the greater Boston area developing a novel Propulsion Platform for deployment in the burgeoning Urban Air Mobility Space. Our innovative startup seeks driven, high performance, high energy independent achievers who can work in a multidisciplinary team to build a groundbreaking electric VTOL platform that will be the foundation for a range of high performance ultra quiet Vertical Flight Systems. Job Description Maglev is looking for fast-paced, enthusiastic, motivated, and collaborative interns who have a drive to learn and will specialize in mechanical and aerospace engineering. Theywill work under the direction of a lead engineer to develop and implement project deliverables. Project sizes will vary and will consist primarily of mechani

Woburn, MA • (15.3 miles) • Full Time • 10/26/2026

About ATI: Automated Tire (ATI) is on a mission to reinvent tire changing and wheel balancing using cutting-edge robotics. We are transforming a process that hasn’t fundamentally changed in decades into an automated, high-performance system built for the future of automotive service. Founded by experienced entrepreneurs and backed by leading players across the automotive and tire industries, ATI is building technology that will redefine how cars are serviced. Our team combines deep robotics expertise with real world deployment, moving fast from prototype to production and scaling solutions directly in the field. If you are excited by hands-on robotics, industrial physical AI, real-world impact, and the challenge of building category-defining technology from the ground up, ATI is the place

Bedford, MA 01730 • (15.5 miles) • Full Time • 10/26/2026

The Senior Mechatronics and Control Engineer will work directly as a member of the RAD research and development team to rapidly prototype automation systems that combine mechanisms, sensors, perception, motion planning, controls, and software integration. This role is for a robotics generalist with broad experience across the layers of a robotic system The candidate should be comfortable moving from CAD and hands-on prototype fabrication to Python/C++ software, ROS-based integration, system bring-up, testing, and debugging. They will integrate existing technologies into new prototype systems, make practical engineering tradeoffs quickly, and turn partially defined automation needs into working robotic demonstrations and early production concepts. Functions Own rapid prototyping efforts for