Napoleon, OH 43545 • (38.7 miles) • Full Time • 8/20/2026

Production Quality Specialist – Warehouse/Packaging FacilityWe are currently hiring a ProductionQuality Specialist for our warehouse packaging facility.We are looking for dependable, detail-oriented individuals who take pride in accuracy, organization, and maintaining high quality standards in a fast-paced warehouse environment.ScheduleMonday–Friday6:00 AM – 2:00 PMPay$21/hourJob ResponsibilitiesInspect packaged products for quality, accuracy, and proper labelingVerify product counts, packaging requirements, and customer specificationsCheck for damaged or defective materials/productsEnsure warehouse and packaging processes meet company quality standardsDocument and report quality issues or discrepanciesWork closely with warehouse and production teams to maintain efficiency and accuracyHelp

Fort Wayne, IN • (27.3 miles) • Full Time • 8/17/2026

Position Summary:This position is responsible for prep, assembly and test of sensor products. This includes, but is not limited to:Preparation of material to assemblePreparation of paperworkAssembly and manufacturing of finished assemblies per instructions.Testing of in-process and finished assemblies.Packaging of the finished assemblies.Completion of all paperwork.Essential Duties and Responsibilities:SolderingAssemblyPottingWire strippingTerminal insertionMeasurement and testStampingEducation, Job Knowledge, Skills and Abilities:Minimum education of a high school diploma or equivalent (Higher education preferred).Experience in electronics assembly.Familiar or trainable in use of measurement equipment (calipers, gages, electronic meters, etc.)Must be able to lift 55lbs to waist level.Must

Roanoke, IN 46783 • (40.2 miles) • Full Time • 8/17/2026

General Assembly - Project Engineer, Ft. Wayne, INJob # 26-249DESCRIPTIONThis Position is on Site at Ft. Wayne, Indiana. If candidate who does not live in Ft. Wayne area will qualify for Living and Travel financial Compensation.Candidate will be responsible for facilitating the effective execution of launch activities within General Assembly in Southeast Michigan. The Zone Engineer will provide technical expertise, project coordination, on-site resource management and act as the single point of contact between the Plant and ME Vehicle Systems Engineering.RESPONSIBILITIES· Liaison between Plant Engineering, Central Engineering, Equipment Suppliers, Installation Contractors, and all departments at the Assembly Plant· Single point contact for tooling/equipment issues, concerns and possible co

Fremont, IN 46737 • (20.5 miles) • Full Time • 8/15/2026

Accelerate the possible by joining a winning Amcor team that’s transforming the packaging industry and improving lives around the world.At Amcor, we unpack possibility through our innovative and responsible packaging to provide solutions that benefit our customers, our people and our planet. More than 10,000 consumers worldwide encounter our products every second and rely on us for safe access to food, medicine and other goods. We value their trust by making safety our guiding principle. It’s our core value and integral to how we do business.Beyond this core principle, our shared values and behaviors unite us as we work together to elevate customers, shape lives and protect the future. We champion our customers and help them succeed. We play to win – adapting quickly in an everchanging wor

Fort Wayne, IN 46825 • (23 miles) • Full Time • 8/15/2026

CAD DESIGNER We are seeking a highly motivated and experienced CAD designer to join our team. The ideal candidate will have: a Technical Certificate or Associate’s Degree in CAD, extensive knowledge of CAD software i.e., Autodesk Inventor/AutoCAD and/or SolidWorks, a strong technical drawing ability, good communication and organizational skills, attention to detail, a good understanding of mathematics, engineering and sheet metal fabrication.Responsibilities: · Create detailed technical drawings, 2D, 3D models and prototypes. · Accurately represent dimensions of materials and other elements using standard G,D&T. · Accurately and effectively manage BOMs and Part Files. · Work with engineering staff to transform product ideas from prototyping to production manufacturing. · Analyze designs fo

Columbia City, IN 46725 • (36.7 miles) • Full Time • 8/15/2026

Job DescriptionThe Tooling Design Engineer will report directly to the Director of Operations. This position will have primary responsibility for the design of gages for measuring, fixtures used in manufacturing, and process drawings used throughout manufacturing.Essential Duties and ResponsibilitiesDesign gages and fixtures to part specificationsCreate detailed drawings from part modelsProvide quote information to Account ManagersMaintain approved documents in SynergyCollaborate with project team and manufacturing engineersSeek input from other team membersExperience/Education4-year degree required or 5 years of experience in CAD design in a manufacturing environment.Experience in a manufacturing environment preferredISO 13485 experience preferredEssential Job Function/SkillsKnowledge of

Auburn, IN • (10.4 miles) • Full Time • 8/13/2026

Zing Recruiting is partnering with a is a major industrial manufacturing company that develops rubber, plastics, and material-based components used in automotive, industrial, and infrastructure applications. We are currently seeking2nd and3rd Shift Maintenance Technician to join theteam.Shifts: 2nd shift: 2:00 PM – 10:00 PM 3rd shift: 10:00 PM – 6:00 AM Monday through Friday Pay:$33.77/hr. Responsibilities:Perform routine maintenance and inspections on machinery, equipment, and facility systems.Troubleshoot and repair mechanical, electrical, hydraulic, and pneumatic systems.Respond to equipment breakdowns and complete repairs to minimize production downtime.Conduct preventive maintenance (PM) to ensure machines operate safely and efficiently.Install, adjust, and test new equipment or repla

Auburn, IN 46706 • (10.5 miles) • Full Time • 9/1/2026

Now Hiring: Food Production (Team Member) | Part-TimeBuild a strong Foundation both professionally and personally with a career at KFC! We’re looking for people who love serving customers, have experience in the restaurant industry and who want to be a part of the largest restaurant company in the world! If you want to build a great career while providing fast, fun and friendly service to our customers, KFC is the perfect place to learn, grow and succeed!We offer the following:A commitment to promote from withinTraining and mentorship programsTuition reimbursement and scholarship opportunitiesReward and recognition cultureCompetitive Pay: $10 per hour - $13 per hourFlexible schedules- day, night and evening shiftsFree meal each shiftEligibility to accrue paid vacation timeCareer advancemen

Fort Wayne, IN 46809 • (34.3 miles) • Full Time • 8/16/2026

Company OverviewMeridian Adhesives Group is a rapidly growing, full service global adhesive solutions provider, specializing in adhesive technologies used in electronics, industrial, and infrastructure applications. Fueled by a series of strategic acquisitions since its formation in 2018, Meridian has established itself as an adhesive technology leader for a broad, global, blue-chip customer base comprised of OEMs, distributors, and industrial clients with an expanding global footprint.**Role and Responsibilities **This position is responsible for the completion and accuracy in the batch making process at the site.Rotation through the job components is considered an essential function of the mixing job.This person must also participate individually and/or as a group in team meetings, safet

Ligonier, IN 46767 • (36.6 miles) • Full Time • 9/9/2026

Job Description: Electrical Controls Technician (Direct Hire)Position Summary:Provides support to the daily operations of the Ligonier plant. Such support will involve the interaction with the production, maintenance and engineering personnel to assure that optimum performance levels are achieved throughout the plant. While maintaining production this individual may also be responsible for project work, such as building electrical panels, robotic programming, PLC, HMI, vision system and other integration work.Applicants must be authorized to work for ANY employer in the U.S. We are unable to sponsor or take over sponsorship of an employment Visa at this time.Starting Pay Range:$36/hr. – $40/hr.Schedule:Monday – Friday, 5/6:00 AM – 1/2:00 PMFlexible shiftsResponsibilities of Position:Suppor

Auburn, IN 46706 • (10.5 miles) • Full Time • 9/9/2026

Description: Job Summary:This position is responsible for the production of die castings to Linamar’s quality standards by following established procedures and work instructions and for safely operating high tech production equipment.ResponsibilitiesParticipates in Linamar’s Safety InitiativesMaintain work area and equipment in a clean orderly condition and follow prescribed safety procedures.Support the die cast/trim and other services’ efforts to keep a continuous flow of high quality castings throughout the plant.Operating all cell equipment including: Die Cast Machines, Trim Presses, Automatic Sprayers, Extraction Equipment, Hoists, Holding Furnaces, Tip Lubricators, Hot Oil Units, Vacuum Units, Metal Lading Equipment, Shot Blast Equipment.Assists and/or performs die changes and sampli

Fort Wayne, IN 46803 • (27.1 miles) • Full Time • 9/9/2026

Job descriptionJoin Our Team as a Production Operator - 2-2-3 ScheduleAt Rea Magnet Wire, we don’t just produce magnet wire – we are POWERING WHAT'S NEXT. If you’re experienced in operating safely, quality production, and driving process improvements, we want you on our team! ?Ready to take the next step?NewStart Pay:$22.50/hour + $0.75 schedule premium (just for 2-2-3 schedule)$23.50 at 90 days + $0.75 schedule premium (just for 2-2-3 schedule)$24.50 at 1 year + $0.75 schedule premium (just for 2-2-3 schedule)Main Responsibilities:Set Up and Operate MachinesFollow Specification for Insulation WireInspect Finished Products and TestingMaintain Work Area CleanComply with PPE and Safety RequirementsResponsible for producing insulated wire, including loading and unloading reels manually; strin

Fort Wayne, IN 46806-2800 • (27.3 miles) • Full Time • 9/9/2026

Description: QuikCut, LLC is growing again and we're seeking a large-fixture technical Assembler to assemble various steel components and products. This role requires precision, attention to detail, and the ability to work efficiently and collaboratively in a fast-paced environment.Key ResponsibilitiesAssemble large-scale components using hand and power toolsRead and interpret blueprints, schematics, and assembly instructionsInspect and test assembled products to ensure they meet quality standardsIdentify and report any defects or issues in the assembly processRequirements: Previous experience in manufacturing is preferredAbility to read and interpret technical documents and drawings a plusPrevious experience using hand tools and power tools such as drills, saws, and wrenchesAbility to lif

Napoleon, OH 43545 • (38.7 miles) • Full Time • 9/9/2026

MAIN PURPOSE OF JOBManufacturer of foundry cores, luting paste and packaging for railroad maintenance supplier.Be able to execute work orders and produce welding kits for railroad maintenance.Strong focus on safety, quality and efficiencies..KEY AREAS OF ACTIVITY AND RESPONSIBILITYLearn how to set-up, run and operate various production and packaging machines.Be able to track and keep record for progress on hourly boards. Be trainable to learn OSHA safety standards, 5-S and working in a team setting.Be able to work without physical limitations, bending, twisting or squatting may be necessary from time to time.Be able to stack a 50 lb. package when necessary.Forklift training is offered and is a plus to have experience but not required.Performs other duties or responsibilities, as assigned.C

Waterloo, IN 46793 • (8 miles) • Full Time • 9/9/2026

Company Description Build Something That Lasts LiterallyAt Techo-Bloc, we’re not just paving patios we’re paving the way for meaningful careers. We design and manufacture premium landscaping products used across North America, and our automated manufacturing plants are where innovation meets craftsmanship.Job Description Pay: $29.68/hr ($24.68/hr base rate plus $5/hr shift premium for night shift)Shift: Monday–Thursday 6:00pm - 6:00amLocation: Waterloo, INPosition:We’re looking for hands-on, mechanically minded operators who enjoy working with equipment, solving problems, and being part of a team that takes pride in what they produce.If you like staying busy, learning new machines, and seeing the results of your work every day this role is for you.Operate automated manufacturing equipment

Fort Wayne, IN 46835 • (21.1 miles) • Full Time • 9/9/2026

Production ManagerLocation: Fort Wayne, IndianaPay Range: $65,000-$75,000Roles and ResponsibilitiesEnsure smooth communication with homeowners from project initiation to completionKeep customers updated on project progress and address any issues promptlyPrepare all stages necessary to produce an excellent installation experience for the homeowner, the crews, and the sales team members for warranty work and all roofing projectsOrder material and schedule labor for all roofing, siding, soffit, fascia, windows, doors, and gutter jobs for both the Residential and Commercial divisionsTrack and manage gross profit margins, ensuring all projects remain within budgetProvide weekly and monthly production reports to the leadership teamRecruit, hire, and train production team members to ensure proper

Fort Wayne, IN 46803 • (27.1 miles) • Full Time • 9/9/2026

Build Reliability. Advance Automation. Grow Your Career.Join a team that invests in people and technology. Phoenix Stampingheadquartered in Atlanta with operations in Fort Wayne, IN and Fort Worth, TXhas manufactured sheet metal and rod products since 1986. We serve customers across the U.S., Canada, and Mexico, powered by a family-oriented culture and our motto: “Customers first, employees always!”Total RewardsShift Premium: 15% for 3rd shiftProfit Sharing Bonuses: Eligible after 6 months and one full quarter; paid out quarterlyReferral Bonuses: Both you and your referral can earnup to $1,600 each over a yearExtra opportunities throughout the year for incentives and awardsRole PurposeOwn the preventive and diagnostic maintenance of production equipment to ensure safe, efficient, and high-

Fort Wayne, IN 46808 • (27.7 miles) • Full Time • 9/9/2026

Company Description We are a global materials science and digital identification solutions company with locations in over 50 countries, and approximately 35,000 employees worldwide. As a science and innovation company, we believe that diverse teams are stronger teams. We are committed to fostering a culture of curiosity and courage, where you can grow your career with a company that has innovation in its DNA. Founded on creating real-world impact to enable a better future, we strive to provide an open, collaborative culture where diversity of thought is encouraged and respected. Hear from our employees about what it's like working at Avery Dennison. Learn more at www.averydennison.com.At Avery Dennison, some of the great benefits we provide are:LGBTQ+ Health Program: Anthem Inclusive Care

Albion, IN 46701 • (29.3 miles) • Full Time • 9/9/2026

Company Description We Are Bosch.At Bosch, we shape the future by inventing high-quality technologies and services that spark enthusiasm and enrich people’s lives. Our areas of activity are every bit as diverse as our outstanding Bosch teams around the world. Their creativity is the key to innovation through connected living, mobility, or industry.Let’s grow together, enjoy more, and inspire each other.Work #LikeABosch •Reinvent yourself:At Bosch, you will evolve. •Discover new directions:At Bosch, you will find your place.• Balance your life:At Bosch, your job matches your lifestyle.• Celebrate success: At Bosch, we celebrate you.• Be yourself: At Bosch, we value values.• Shape tomorrow:At Bosch, you change lives.Job Description The Material Planner is responsible for the procurement of p

Coldwater, MI 49036 • (34 miles) • Full Time • 9/9/2026

Description: About Elmet TechnologiesElmet Technologies is a division of The Elmet Group and a leading U.S.-based manufacturer of precision-engineered products serving global industries, including aerospace, defense, semiconductor, and energy. Through advanced materials processing and precision manufacturing capabilities, Elmet produces high-performance components for some of the world's most demanding applications.Our Coldwater, Michigan facility is focused on operational excellence, equipment reliability, safety, and continuous improvement.Position OverviewWe are seeking a Quality Inspector to join our Quality team at our Coldwater, Michigan manufacturing facility.The Quality Inspector is responsible for performing in-process and final inspections to verify that manufactured products mee

Ligonier, IN 46767-2412 • (37.5 miles) • Full Time • 9/9/2026

Description: Location: Ligonier, INPosition SummaryStenTech is seeking a dependable and detail-oriented Quality Control Inspector to join our team in our Ligonier, Indiana facility. This position plays a critical role in ensuring our products meet customer specifications and quality standards. The ideal candidate thrives in a fast-paced environment, has a keen eye for detail, and enjoys hands-on work inspecting precision metal components.Requirements: Key ResponsibilitiesInspect incoming and finished metal parts to verify compliance with customer specifications and quality standards.Review inspection paperwork, work orders, and supporting documentation for accuracy and completeness.Identify, document, and communicate defects, discrepancies, and non-conforming materials.Use precision measur

Napoleon, OH 43545 • (38.7 miles) • Full Time • 9/8/2026

Essential Functions Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Job SummaryWill provide technical support for CHS line equipment, assisting Customers, Sales, and the Service team with troubleshooting, service coordination, parts support, and maintenance of technical documentation related to CHS equipment. (This is not an IT position.)Duties and Responsibilities: Receive and respond to customer, Sales, and internal requests for technical support related to CHS line equipment, including service and parts inquiries.Provide technical assistance for CHS line equipment, including troubleshooting mechanical and electrical issues and supporting resolution of equipment performance concerns.Assist in coordinating service activities

Van Wert, OH 45891 • (41.1 miles) • Full Time • 9/8/2026

Description: Join the Cornwell Quality Tools Family as a Production Associate!Own your future at Cornwell Quality Tools!Join the Cornwell Family where your talent and contributions are rewarded every day! For over 100 years, Cornwell Quality Tools has been the trusted choice of professionals nationwide, delivering top-tier tools and unrivaled quality. Learn more here at www.cornwelltools.com.What is in it for you:· Top tier Medical Plan with some of the lowest premiums in the area.· Affordable Dental, and Vision coverage.· Life Insurance and Accidental Death & Dismemberment (AD&D) coverage.· Disability Insurance.· Employee Assistance Program.· 401(k) eligibility.· Family Summer Picnic, Employee Recognition Meals, and many other fun events!Your Role:Fabrication:· Assist in production proces

Fort Wayne, IN 46802 • (29.1 miles) • Full Time • 9/8/2026

JOB DUTIESThe Weatherization Pre-Audit Inspector performs all functions necessary to identify the best candidate houses to receive weatherization services. The Pre-Audit Inspector compiles background documentation on eligible properties from client applications and other sources, calculates utility consumption ratings using computer software, prioritizes preliminary findings, contacts prospects through mass or targeted mailers or directly by phone, schedules and performs cursory site visits, interviews and educates clients on energy conservation and healthy homes principles, collects site data demonstrating energy savings opportunities and habitability conditions, synthesizes findings, and communicates recommendations based on totality of information collected. Additionally, the Pre-Audit

Garrett, IN 46738 • (15.6 miles) • Full Time • 9/8/2026

Description: At IKG® we pride ourselves on being the leading manufacturer of safety flooring and access infrastructure in the US and Mexico, forging partnerships developed through our expertise in engineering applications and client experience. Our solutions have been implemented in a variety of industries and projects, from architectural structures to industrial walkways and access systems.The Machine Operator will manufacture bar grating by operating a complex multi-stage electro forge welding line that processes and welds steel coils and wire into grating panels. The successful candidate for this role will be working closely with a team to operate this complex and technical piece of machinery to produce welded bar grating. The individual will provide input to supervision regarding machi

Angola, IN • (16.4 miles) • Full Time • 9/8/2026

Company Description RRD is a leading global provider of marketing, packaging, print, and supply chain solutions that elevate engagement across the complete customer journey. The company offers the industry’s most trusted portfolio of creative execution and world-wide business process consulting, with services designed to lower environmental impact. With 22,000 clients, including 93% of the Fortune 100, and 32,000 employees across 28 countries, RRD brings the expertise, execution, and scale designed to transform customer touchpoints into meaningful moments of impact.Job Description Sets up and operates collating and/or labeling/patching machines to produce value added enhancements to in-process workReview specifications and set up equipment that perform forms collating from web rolls, label

Fort Wayne, IN 46825 • (23 miles) • Full Time • 9/8/2026

Shape the Future of Care with PrecisionAvalign designs and manufactures innovative, highperformance, costeffective medical devices. Our team is growing fast because our custom-made components make a real difference for clinicians and their patients.We currently have three openings for experienced CNC programming professionals across three specialties: CNC Mill, Swiss Lathe, and Laser Etch. As a CAM Applications Engineer, you’ll convert engineering intent into flawlessly machined parts through expert programming, fixture design, and process optimization.A Day in the LifeYou start by reviewing drawings and specifications, interpreting GD&T per ASME Y14.5. You model, program, and simulate in CAD/CAM (Mastercam, Esprit, SolidWorks), then head to the floor to prove out, troubleshoot, and optimi

Fort Wayne, IN 46825 • (23 miles) • Full Time • 9/8/2026

Ready to put your multiaxis setup skills to work on lifechanging parts?If you can read a complex print, dial in a program, and prove out tighttolerance features, we want to hear from you. As a Precision Mill/Turn CNC Setup Specialist, you’ll help produce topquality medical instruments and implantssafely, accurately, and on schedule.Could this be you?Do you excel at setting up, changing over, and optimizing millturn machines?Can you troubleshoot and debug CNC programs, adjust offsets, and perform tool changes with confidence?Are you comfortable performing burr removal and using finishing tools to meet exact specifications?Do you interpret blueprints, inspection check sheets, and work instructions without hesitation?Will you perform inprocess and final inspections using calipers, micrometers

Fort Wayne, IN • (27.3 miles) • Full Time • 9/8/2026

Industrial Maintenance Technician (CNC & Automation) - 3rd ShiftWhat We Look ForCore Skills: Strong electrical and mechanical analytical problem-solving ability. We are seeking a technician who is strong on the electrical side, but we will review candidates who are more mechanical.Experience: Repairing and troubleshooting CNC machines and mechanical presses in a production environment.Systems Knowledge: Familiarity with AC/DC drives, servo motors, PLCs, pneumatics, hydraulics, and industrial control systems.Blueprints: Ability to read and interpret hydraulic, mechanical, and pneumatic blueprints.Education: High school diploma or GED required.Flexibility: Willingness to work the overnight shift and overtime is desired.Note: Specialized production machinery experts only; facilities maintenan

Bronson, MI 49028 • (33 miles) • Full Time • 9/8/2026

Description: 1 REPORTING RELATIONSHIPReports to the Quality Supervisor.2 PURPOSE2.1 Function2.1.1 Conduct audits of finished product prior to shipment to the Customer.2.1.2 Conduct Containment inspection and quality support.2.1.3 Provide support to Manufacturing in regards to quality issues.2.2 Authority2.2.1 Ensure completion of Containment Inspection per applicable procedures and work instructions. Affect processes when needed.3 DUTIES AND RESPONSIBILITIES3.1 Containment Inspection3.1.1 Perform Containment Inspection per the Containment Inspection Instructions, considering shipping schedules, per applicable work instructions.3.1.2 Completion of Containment Inspection Sort sheets.3.1.3 Ensure containment actions are carried out when inspection failures occur.3.1.4 Ensure appropriate part

Jonesville, MI 49250 • (42.9 miles) • Full Time • 9/8/2026

SummaryThe Production Drafter is responsible for developing complete and accurate shop drawings that enable the manufacturing plant to efficiently build all components required for modular home construction. This role ensures that all prints are build-ready, coordinated across disciplines, and aligned with customer orders and structural requirements.Key ResponsibilitiesPrint Review & CoordinationReview house plans for errors, omissions, and inconsistencies.Make necessary corrections and communicate all changes to Sales, Purchasing, and Production Control.Verify that all items on the sales order are accurately reflected in the prints.Review all beam and header specifications to ensure proper sizing, placement, and structural viability.Production Drawings DevelopmentFloor FramingVerify joist

Bryan, OH 43506 • (16.6 miles) • Full Time • 9/7/2026

Bard Manufacturing Company, Inc. currently has openings for production positions at our facility in Bryan, OH.For over 110 years, Bard Manufacturing Company has been a family owned and operated company, leading the HVAC industry in the modular, classroom, equipment shelter, and other light commercial markets. With production facilities in Ohio, Georgia, and Mexico, we service our customers both nationwide and internationally by designing and manufacturing cutting-edge engineered products.Scope and Responsibilities:Performs repetitive work at a work station or assembly line, assembling metal, electrical, or mechanical components/parts into an HVAC unit.Specific responsibilities include, but are not limited to:Performs any assembly functions, using hand or power toolsMonitor and responsible

Pioneer, OH 43554 • (22.7 miles) • Full Time • 9/7/2026

Production Team Members work efficiently, in a safe manner, maintain high quality standards, and help to ensure that guest expectations are met. Positions include forklift operation, machine operation, and product assembly. There are many advancement opportunities to move into leadership positions and grow with the company.Primary Responsibilities:Forklift positionsLoading material in the warehouse, yard, and onto outgoing trucks.Manual counting and scanning of units.Scanning products into computer system and using computer to pick orders.Machine Operation positionsLearn the machine controls to ensure that product is assembled or produced properly. Use pneumatic gun, automatic bander and application of ID labels.Perform any necessary corrective actions to maintain a quality product.Communi

Churubusco, IN 46723 • (26.9 miles) • Full Time • 9/7/2026

Position Summary: The Controls Tech will play a pivotal role in the facilities operation by troubleshooting electrical, hydraulic, and pneumatic systems in the plant.Duties and Responsibilities: Installation and Maintenance: Install, maintain, and repair control systems, Programmable Logic Controllers (PLCs), Human-Machine Interfaces (HMIs), and other automated systems. Troubleshooting: Diagnose and resolve issues with control systems, ensuring low downtime and optimal functionality. Programming: Program and calibrate control systems for optimal performance, using various programming languages and software. Collaboration: Work closely with engineers and other technical staff to design and develop control systems, ensuring compliance with safety regulations. Training: Provide training and s

Fort Wayne, IN 46815 • (24.4 miles) • Full Time • 9/7/2026

DescriptionGalbraith’s Landscaping & Lawn Care is proudly celebrating 75 years as a locally owned and growing company serving both residential and commercial customers. We value quality work, reliability, and strong relationships with our team and clients.To support our continued growth, we are seeking an independent, self-motivated individual who enjoys working independently on a variety of vehicles and small engine equipment. This position is ideal for an experienced mechanic looking for steady part-time evening work. You will be responsible for diagnosing problems, completing repairs, performing preventative maintenance, and helping ensure our equipment is ready for our crews each morning.Our equipment is used heavily in a professional landscaping environment, so we are looking for some

Fort Wayne, IN • (27.3 miles) • Full Time • 9/7/2026

HiFyve is hiring a Shop Technician in the Construction Equipment industry in Lafayette, INSalary: $30.00 – $35.00 per hour (based on experience)Shift: 1st Shift - 7:00am–3:30pmLocation: Fort Wayne, INJob Duties and ResponsibilitiesDiagnose, troubleshoot, and repair heavy equipment including loaders, excavators, dozers, graders, and other construction machinery.Perform preventive maintenance including inspections, lubrication, fluid changes, and adjustments to maximize equipment reliability.Rebuild, replace, and repair major components such as hydraulic pumps, engines, transmissions, and electrical systems.Utilize diagnostic software, schematics, and technical manuals to complete accurate and timely repairs.Operate shop tools, welding equipment, and lifting devices safely and effectively.Do

Fort Wayne, IN • (27.3 miles) • Full Time • 9/7/2026

Description: Manufacturing TechnicianJob Type: Non-exempt, Part-time / Full-timeLocation: Onsite in Fort Wayne, IN, with potential travel to Auburn, INCompensation: $17.00 – $23.00 per hour, depending on experience and qualifications.Hours: 30-40 hours per week with overtime and weekends as neededAboutVeroTouch ScienceVeroTouch Science is transforming the materials that build the world. We are an industrial chemical and materials R&D and manufacturing startup, developing and producing specialty chemical systems from the ground up with a relentless focus on real-world performance.We are focused on concrete admixtures, material additives, coatings, and specialty chemical systems - developing products in-house, taking them through production, and building the infrastructure to scale them. We

Fort Wayne, IN 46809 • (34.3 miles) • Full Time • 9/6/2026

Description: Family-owned and -operated since 1964, TFE provides high-quality Fluid Power and Power Transmission products to northeast and central Indiana, northwest Ohio and southern Michigan. TFE is a growing company with emphasis on quality products and service for the OEM customer and the end user.We are looking for a Production Assembly Operator to join our team! This is a light labor position that requires attention to detail, strong measurement skills and ability to work as a team!Available Schedules:Monday-Friday1st Shift 7am-3pmand2nd Shift 4pm-12amPay $15-16/HrPerks:Work/Life BalanceAdvancement OpportunitiesPaid Time Off/vacationBirthday Paid Time OffPaid HolidaysClimate Controlled401(k) with generous employer matchMedical InsuranceDental insuranceVision InsuranceDisability insur

Sturgis, MI 49091 • (40.4 miles) • Full Time • 9/6/2026

Basin Industries offers paid holidays, vacation, and great health insurance options. This is an onsiteposition with travel and off-site work as needed.WORK STATUS: Must be a permanent United States resident (U.S. Citizen or Green Card Holder)Essential duties and responsibilities include the ability to work from engineering drawings and CAD models to develop inspection programs using Polyworks and or similar software. The need to work from written and oral instructions, engineering drawings and specifications to select, plan, set up and use standard measuring equipment to inspect hardware for conformity with specifications.Pay commensurate with experience.Position is onsite in Sturgis, MI with travel and working off site as needed.Basin Industries offers great health coverage options along

Bryan, OH 43506 • (16.6 miles) • Full Time • 9/6/2026

Description: Fabricator - LESBryan, OHCountertop Fabricator (3rd Shift) Full Time L.E. Smith, a subsidiary of Cutting Edge Countertops, has been a manufacturer and distributor of high-quality countertops and surfaces since 1950. A lot has changed over the decades, but our commitment to our clients has never wavered. L.E. Smith is looking for a 1ST Shift Fabricator 5:00 AM – 3:30 PM Monday through Thursday. A Fabricator plays a vital role in the success of our business; you will work with a team to fabricate countertops using various hand tools, such as routers, sanders, pneumatic staple guns, and hand files. Responsibilities:Operating sanders, miter saws, table saw, and routersCutting and assembling countertops to specified sizesCutting and applying build-upBanding countertopsFabrication o

Decatur, IN 46733 • (41.4 miles) • Full Time • 9/6/2026

Company Description Eurofins Scientific is an international life sciences company, providing a unique range of analytical testing services to clients across multiple industries, to make life and our environment safer, healthier and more sustainable. From the food you eat, to the water you drink, to the medicines you rely on, Eurofins works with the biggest companies in the world to ensure the products they supply are safe, their ingredients are authentic and labelling is accurate.Eurofins is the global leader in food, environment, pharmaceutical and cosmetic product testing and in agroscience Contract Research Organisation services. Eurofins is one of the market leaders in certain testing and laboratory services for genomics, discovery pharmacology, forensics, advanced material sciences an