Cedar Rapids, IA 52402 • (42.8 miles) • Full Time • 10/18/2026

Position: Device Engineer Job Description: What You'll Be Doing: Perform Development and Verification for Flight Management system for avionics applications. DO 178 DAL A verification Developing High Level and Low Level requirements from system requirements Analyze System level architectural requirements and use it for Design and Development of Software Requirements. Providing technical analysis by reviewing the artifacts What We Are Looking For: Bachelor’s Degree in Electrical or Computer Engineering. Development of Test cases and Test procedures execution. Generation of Test results and reports for the execution. Developing support utilities to reduce the cycle time and enhance the process. Perform Dry Run and RFS related activities. Co-ordination and team player What’s In It

Waterloo, IA 50703 • (5.7 miles) • Full Time • 10/18/2026

Reporting to the Operations Manager, you will lead plant production operations by directing production leadership teams and coordinating manufacturing activities to achieve safety, quality, service, and performance objectives. You will ensure the effective alignment of people, materials, and equipment to support efficient production flow while fostering a culture of continuous improvement, operational excellence, and regulatory compliance within a manufacturing environment. Schedule: 7:00pm-7:00am 2/2/3 schedule pattern A Taste of Your Responsibilities Ensure food safety, product quality, and regulatory compliance standards are consistently achieved. Lead production supervisors and frontline leaders to deliver operational performance targets and drive accountability. Allocate labor, materi

Manchester, IA 52057 • (39.6 miles) • Full Time • 11/4/2026

Job Overview: Generally expected to work as a valued member of the XL Specialized Trailers manufacturing team in support of the Director of Operations and Production Manager. Manufactures products by supervising staff; organizing and monitoring workflow; acts as a quality inspector; serves as a safety coordinator, material handler and trainer for area of responsibility. Essential Duties and Responsibilities: Spends 50% of their time in direct labor in area of responsibility. Accomplishes manufacturing staff results by communicating job expectations; planning, monitoring, and appraising job results; coaching, counseling, and disciplining employees; initiating, coordinating, and enforcing systems, policies, and procedures. Maintain staff by selecting, orienting, and training employees, devel

Marion, IA 52302 • (43.7 miles) • Full Time • 11/4/2026

This position will be responsible to maintain machinery and equipment on a day-to-day basis by repairing, install, adjusting, or troubleshooting to ensure production is running efficiently. 1. Maintaining equipment to ensure production goals are met. 2. Provide emergency repairs of equipment during operation. 3. Will perform regular/scheduled preventative maintenance and repairs of production equipment and facilities. 4. Responsible for diagnosing problem, will replace or repair parts, and test to ensure equipment is running correctly. 5. Perform mechanical skills including, mechanical, electrical pneumatic, and hydraulic troubleshooting and repair of production equipment. 6. Assist with installment of equipment 7. Read and interpret equipment manuals in order to complete required maintena

Marion, IA 52302 • (43.7 miles) • Full Time • $30.00 to $40.00 / hr • 11/3/2026

Description These service techs will be supporting the new data centers in Cedar Rapids, Iowa. Their day to day is focused on keeping critical infrastructure operating. They will respond to service calls, alarms, or system issues and work handson with PLCcontrolled systems tied to power and facility infrastructure. This includes troubleshooting I/O, validating signals from field devices, checking control panels and wiring, and verifying that sensors, breakers, and meters are communicating correctly. They will support commissioning and startup activities for new buildings or equipment, helping with I/O checkout, system testing, and startup verification. Will make PLC or HMI adjustmentssuch as setpoints, alarms, or configuration changesbut not programming from scratch. Will be fully hands on

Tama, IA 52339 • (41.9 miles) • Full Time • $90,000 to $130,000 / yr • 11/3/2026

Senior Controls Engineer Company: Deimco Finishing Equipment Location: Tama, Iowa (On-site, Some Travel Required) Job Type: Full-time Compensation: Competitive base salary ($90,000 to $130,000) + profit sharing Role Overview At Deimco, we design and manufacture custom finishing, material handling, and automated packaging systems engineered to solve complex industrial challenges. For decades, we have delivered turnkey, high-quality, rugged solutions for our clients. We pride ourselves on innovation, precision engineering, and a collaborative team environment. We are looking for an experienced Senior Controls Engineer to lead the electrical design, programming, and commissioning of our custom automated machinery. As a Senior Controls Engineer, you will own the entire lifecycle of control sys

Marion, IA 52302 • (43.7 miles) • Full Time • $28.00 to $35.00 / hr • 11/3/2026

Position Type: 6 month contract to hire Worksite: Marion, IA 52302 Estimated Pay Rate: 30-35/hour Exactcompensationmayvarybasedonseveralfactors,includingskills,experiencelevel,andeducation.Benefitpackagesforthisroleincludesmedical,dental,andvisioninsurance REQUIRED SKILLS AND EXPERIENCE Previous experience working in a data center, telecommunications, fiber optic, or structured cabling environment. Strong understanding of fiber optic installation and termination practices. Experience reviewing or performing OTDR and optical power meter testing. Knowledge of proper fiber routing, cable management, bend radius, labeling, and termination standards. Ability to read and interpret construction drawings, floor plans, rack elevations, and cabling documentation. Experience performing inspections, i

Waterloo, IA • (6.4 miles) • Full Time • 11/1/2026

Company Description manufacturing company Job Description Senior Plant Manager / Production Manager / Manufacturing Manager / Operations Manager in Northern Iowa needed to run a metals machining and assembly operation of 100 people. Experience with CNC and manual machining, metal products assembly, parts making, machinery, fabricating equipment, or materials handling systems would be a suitable fit. This job is in a small town in northern Iowa. If you are willing to relocate, or live in that area, please apply. Work to maintain a safety-first culture Improve efficiencies in quality control and on-time shipments Oversee a production organization that keeps workers safe while maintaining cost control. Make decisions about operating and capital budget (P&L). Lead a team of people in productio

Rowley, IA 52329 • (20.6 miles) • Full Time • $28.00 to $40.00 / hr • 11/1/2026

Purpose Support focus on commercial sprayer application customers. Independently perform in-field equipment diagnostics and repairs by operating a mobile service vehicle and traveling to customer locations. Candidates require a strong work ethic to complete a task efficiently with minimal supervision. Individual will serve as an in-field representative for the dealership to provide service solutions. Responsibilities include managing a mobile service schedule to meet customer expectations, while meeting field revenue expectations. Must maintain a mobile parts stock, including tracking and billing coordination. Communication skills required to clearly articulate aspects of work being performed to a customer in a courteous and effective manner. Responsibilities: Perform diagnostics and repai

Eldora, IA 50627 • (44.9 miles) • Full Time • $32.00 to $35.00 / hr • 11/1/2026

Description As background, MLS is hiring a Petroleum Service Technician to keep fueling equipment running safely and in compliance for [convenience stores, fleets, farms, and municipal sites] across Iowa, Minnesota, North Dakota, South Dakota, Nebraska, Missouri, and Kansas, and I want to be direct about what we offer, because I know experienced technicians have more choices today than ever before. What we offer $25–$35 per hour, based on experience and certifications Regular overtime at time-and-a-half, plus on-call pay Sign-on bonus of up to $2,500 for petroleum-related certifications Retention bonus after one year, plus an ongoing bonus program Take-home company vehicle, tools, and uniforms Travel expenses covered, including hotel stays Health insurance available from your first day 401

Waterloo, IA 50703 • (6.1 miles) • Full Time • $61,000 to $130,000 / yr • 10/30/2026

JOB SUMMARY: The position is responsible for leading and training supervisors across various functions, including production documentation, managing yields, time and attendance tracking, addressing disciplinary issues, motivating team members, and handling turnover and absenteeism. The role also emphasizes promoting safety, problem-solving, and ensuring effective performance in key areas such as safety, quality, workers' compensation, and team member morale. Additionally, the position is accountable for managing bid movement and supporting team members' adaptability to a dynamic work environment. Building a strong, communicative, and adaptable team is central to this role. NON-NEGOTIABLE KEY REQUIREMENTS OF THIS POSITION: 3 plus years' experience in a supervisory role in a meat processing

Oelwein, IA 50662 • (21.3 miles) • Full Time • 10/30/2026

As the Production Manager , you will lead the daily operations of our production facility, ensuring every garment leaving our plant meets CITY's standards for quality, efficiency, and cleanliness. This is a hands-on leadership role that combines people management, operational excellence, and continuous improvement. You'll lead a team of supervisors and production associates, oversee workflow across the plant, partner closely with the Service Department, and drive a culture focused on safety, accountability, and exceptional customer service. Success in this role means building a highly engaged team, maintaining efficient production processes, solving operational challenges quickly, and continuously improving quality and productivity. Key Responsibilities Lead, coach, and develop supervisors

Cedar Rapids, IA 52401 • (44.9 miles) • Full Time • $70,000 to $80,000 / yr • 10/30/2026

Lattner is a 109 year old boiler manufacturing company that has a position open for a plant manager. Duties consist of all phases of supervision, direction and operation of the facility. Knowledge of welding, assembly and personnel supervision is a requirement. Responsibilities also include interaction and communication with the company General Manager and the QC Engineering department. \nCompany Description Lattner Boiler manufactures industrial electric and gas-fired steam and hot water boilers. Company Description Lattner Boiler manufactures industrial electric and gas-fired steam and hot water boilers.

Waterloo, IA • (6.4 miles) • Full Time • 10/30/2026

Job Title: Schedule Planner I Client: Heavy Machine Manufacturing Company Duration: 12 Months (Possibility of Extension) Location: Waterloo, IA 50703 Shift: 1st Shift, 6:00 AM–2:30 PM (Possible Weekday/Weekend Overtime; Must Be Flexible for Off-Shift Hours) Work Arrangement: Onsite Description: Job Summary Plan and schedule manufacturing and service parts to meet production requirements and delivery targets. Coordinate material availability, production schedules, inventory accuracy, and engineering changes to support uninterrupted operations. Key Responsibilities Schedule production and service parts and expedite production and purchased materials as needed. Coordinate material requirements across departments and support delivery schedules and production sequencing. Communicate and impleme

Waterloo, IA 50704 • (4.6 miles) • Full Time • 10/28/2026

Job Title: Materials Engineering Technician Location: Waterloo, IA 50704 Duration: 24+ months (Possibility of Extension) Major purpose: This job is for a Materials Engineering lab technician whose everyday assignments and tasks may vary from routine to infrequent. Duties are relatively broad in Product and may require evaluations by the position holder. The holder of this position will perform materials engineering supporting tasks or complex laboratory analytical functions with limited engineering oversight. Major duties: Description of the major duties performed in this job. Completes tasks involving preparation or analysis of material samples/components/processes with minor engineering oversight for moderately complex activities. Develop, recommend, and implement analytical or process c

Waterloo, IA 50704 • (4.6 miles) • Full Time • 10/28/2026

Job Title: Materials Engineering Technician Job ID: 26-04963 Location:Waterloo, IA, 50704 Duration: 24 Months on W2 Contract Job Description: MAJOR PURPOSE: This job is for a Materials Engineering lab technician whose everyday assignments and tasks may vary from routine to infrequent. Duties are relatively broad in scope and may require evaluations by the position holder. The holder of this position will perform materials engineering supporting tasks or complex laboratory analytical functions with limited engineering oversight. MAJOR DUTIES: Description of the major duties performed in this job. Completes tasks involving preparation or analysis of material samples/components/processes with minor engineering oversight for moderately complex activities. Develop, recommend and implement analy

Hiawatha, IA • (39.7 miles) • Full Time • 10/28/2026

Assembler Job Description This role focuses on a variety of assembly and warehouse activities in a clean, temperature-controlled production environment. You will support the fabrication, assembly, and preparation of parts for shipment by operating hand and air-powered tools, using measuring devices, and working with basic computer programs. The position offers cross-training across multiple areas of the warehouse and production floor, providing exposure to hose fabrication, kitting, crimping, and inventory-related tasks. Responsibilities Perform a range of assembly duties including operating saws, fitting assembly equipment, crimpers, assembly lathes, pressure testers, and working in flush booths. Use air-powered tools and other hand tools to assemble products according to specifications a

Waterloo, IA • (6.4 miles) • Full Time • $35.00 to $38.00 / hr • 10/27/2026

Job Title: Manufacturing Engineer Location: Waterloo Works – Tractor Operations Shift: 1st shift (7 am to 3:30 pm) – Possible overtime to support production line Major Purpose: Plans, coordinates, and performs manufacturing engineering work for a project or process. Operates in a team environment within either the enterprise product delivery process or the enterprise order fullment process. At this level, projects are of limited scope and responsibility; work plans and decisions are made within established guidelines and may be reviewed by supervisors and/or managers. May assign coordinate and review portions of the work for support personnel and contractors. Major Duties: Carry out a range of activities under the guidance of more senior colleagues to support the analysis of information an

Waterloo, IA • (6.4 miles) • Full Time • $65,000 to $75,000 / yr • 10/25/2026

Looking for a change? You want to work with a company with great benefits and a flexible schedule? Be a part of a solution to help companies be more successful and keep more jobs in the US? We are looking for strong candidates that are problem solvers and have a great attitude. Work with large manufacturers to make a difference in the output and performance of their company. You can help them identify and help fix the issues they are having. Work with the tooling companies to help find solutions and then run the tests to prove them out. Get to be in the know of the new tools coming out and also be able to try them. This is a rewarding position that will have you wanting to go to work every day. The ideal candidate loves talking to people and proactively solving issues. You will be responsi

Cedar Rapids, IA • (44.8 miles) • Full Time • $25.00 to $40.00 / hr • 10/23/2026

Pay: $25.00 – $40.00/hour Travel Requirement: 100% full-time travel to one of our project sites nationwide. All travel expenses covered by the company and per diem is paid. Current travel locations include but are not limited to Monroe, LA, Conesville, OH, Cedar Rapids, IA, and Salt Lake City, UT. LINX is hiring a Low Voltage Quality and Training Specialist to own QA/QC for fiber and copper cabling installations on hyperscale data center projects, paying $25.00 to $40.00 an hour. You'll inspect completed work against BICSI and TIA/EIA standards, catch and correct problems before they become the customer's problem and train the crews doing the installing. This is a hands-on quality role, not a desk audit job. Daily activities include: job-site inspections, pre- and post-installation quality

Cedar Rapids, IA • (44.8 miles) • Full Time • $14.50 / hr • 10/17/2026

Now Hiring: Display Builders / Assemblers in Cedar Rapids. Shift: 7am - 3:30pm | Monday - Friday What You’ll Do: Unpack product and components Assemble retail display units according to instructions Load and package completed displays for shipment Work alongside team members to meet daily production and quality goals Perform other tasks as assigned What We’re Looking For: Ability to work in a team-based production environment Attention to detail and quality standards Ability to meet daily quotas Comfortable performing hands-on assembly work This is a great opportunity for someone who enjoys working with their hands, being part of a team, and having consistent weekday hours.

Independence, IA 50644 • (16.9 miles) • Full Time • 10/17/2026

Position Summary: The basic function of the Drill Press Department Supervisor is to supervise and coordinate the activities of workers engaged in operating a variety of industrial machines so that GMM may produce under the optimum conditions of productivity, efficiency, cost effectiveness and ease of operations. Essential Duties and Responsibilities include the following: Other duties may be assigned. Understand and promote "lean principles" throughout the company. Work with the team leaders/working supervisors to coordinate dispatch lists and routing of work assignments within the department. Schedule employee hours in relation to the amount of work in the facility. Optimize the resources (machines & employees) within his/her department. Meet the goals set by management on quality, effici

Waterloo, IA 50703 • (6.1 miles) • Part Time • $15.00 / hr • 10/16/2026

Everyone knows what ion nitriding, gas nitriding, carbonitriding, and induction hardening are... right? Nope... nope they sure don't! THAT'S OK! Join our team... we would love to teach you!!! AHT has been in the Industry for 40+ years! Our team has touched products that make the world stronger and safer. Our processes improve upon parts manufactured by other industries, including aerospace, defense, firearms, automotive, construction, agriculture, energy and medical... just to name a few. Are you familiar with the jaws of life, how about airplane landing gear, or perhaps the Mars Rover? Our employees processed parts that went to MARS! As part of our team, you will learn about metals, effects of our process on metal, and why quality is so important. You will become an expert in an industry

Manchester, IA 52057 • (39.6 miles) • Full Time • 10/15/2026

Production Supervisor, Manufacturing (Day, Evening and Overnight Shifts Available Currently) (Excellent Full Benefits Package, Competitive Compensation/Bonus Package and more!) The Production Supervisor, Manufacturing will be part of the manufacturing team in support of the Director of Operations and Production Manager. Manufactures products by supervising staff; organizing and monitoring workflow; acts as a quality inspector; serves as a safety coordinator, material handler, and trainer for the area of responsibility. Position Responsibilities: · Complete production plan by scheduling and assigning personnel; accomplishing work results; establishing priorities; monitoring schedules; resolving problems; reporting results of the processing flow on shift production summaries. · Accomplish ma

Manchester, IA • (39.5 miles) • Full Time • $70,000 to $88,000 / yr • 10/8/2026

Production Supervisor - 1st, 2nd & 3rd shifts Company: Confidential - manufacturer Location: Manchester, IA Compensation: $70,000 - $88,000 Employment Type: Full-time; openings on all three shifts About the Company Our client is a manufacturer in Manchester, Iowa with multiple Production Supervisor openings across 1st, 2nd and 3rd shifts. Local or Iowa-based candidates only; relocation is not offered. The Role The Production Supervisor is part of the manufacturing team, supporting the Director of Operations and the Production Manager. You will supervise staff, organize and monitor workflow, and act as quality inspector, safety coordinator, material handler and trainer for your area. About half of your time is spent in direct labor in the area you run. What You Will Do Complete the producti

Waterloo, IA • (6.4 miles) • Full Time • $75,000 to $88,000 / yr • 10/8/2026

The Production Supervisor will be part of the manufacturing team in support of the Director of Operations and Production Manager. Manufactures products by supervising staff; organizing and monitoring workflow; acts as a quality inspector; serves as a safety coordinator, material handler, and trainer for the area of responsibility. DUTIES / RESPONISIBILITIES Complete production plan by scheduling and assigning personnel; accomplishing work results; establishing priorities; monitoring schedules; resolving problems; reporting results of the processing flow on shift production summaries. Accomplish manufacturing staff results by communicating job expectations; planning, monitoring, and appraising job results; coaching, counseling, and disciplining employees; initiating, coordinating, and enfor

Ackley, IA 50601 • (42.6 miles) • Full Time • 11/3/2026

Now Hiring with Competitive Pay and Benefits! Starting Pay - $22/hour (+$2/hour differential for travel) Out of town travel required up to 80-100% of the time Tri Rinse is an award-winning, St. Louis-based provider of agricultural services including seed box management, container management, industrial cleaning, and formulation/packaging. With our promise ofstewardship and sustainability, Tri-Rinse grew out of a demand for EPA-compliant, environmentally responsible services, which we continue to provide our customers in new and expanding ways. Our biggest asset is our people. It is their integrity, resourcefulness, and customer-first mentality that fuel our reputation as true problem-solvers for our industry. Encouraged by a culture of collaboration, we share the liability and passion nece

Marion, IA 52302 • (43.7 miles) • Full Time • 11/4/2026

ELECTRICAL ENGINEER Division: ESCO Power and Safety Solutions Location: Marion, IA Reports to: Principal Arc Flash Engineering Manager Exempt or Non-Exempt: Exempt Status: Full-Time Typical Working Hours: 7:30am to 4:30pm May be required to work extended hours including holidays and weekends due to the 24 hours, 7 days a week, 365 days a year type of service ESCO provides its clients. Ideal candidates will have an interest in arc flash analysis, electrical safety, and industrial/commercial power systems. Synopsis: The Electrical Engineer- Arc Flash is an entry-level position within the technical delivery structure of ESCO Power. This position is best described as a contributing technical resource for external customer project delivery. Work executed will be within a multi-discipline power

Independence, IA 50644 • (16.9 miles) • Full Time • 11/4/2026

CAD & Quoting Drafter Pries Enterprises | Independence, Iowa Pries Enterprises is looking for a detail-oriented and motivated CAD & Quoting Drafter to join our growing team! In this role, you will play an important part in supporting our extrusion operations by creating technical drawings, developing customer quotes, and coordinating information across multiple departments. The ideal candidate is organized, enjoys working with technical details, communicates well with others, and takes pride in producing accurate work. If you enjoy problem-solving and working in a manufacturing environment, we'd love to hear from you! What You'll Do Create and maintain technical drawings of aluminum extrusion profiles using AutoCAD. Review customer requirements and determine the manufacturing processes nee

Cedar Falls, IA 50613 • (14 miles) • Full Time • $31.60 / hr • 11/3/2026

If you love hands-on learning and are interested in a career that you can grow with, then let’s work together. The Position: We are currently hiring a Crew Foreman for our highway division at our Cedar Falls location. We are looking for candidates who are innovative, self-motivated, and interested in working with a growing company. In this role, candidates must have electrical and construction experience, experience with concrete and traffic control, as well as with equipment and blueprints. Candidates must work closely with Project Managers and field employees, adapt to changing work environments, actively engage in K&W Electric, Inc.’s safety policies, and be able to maintain a positive image of one’s self and of the Company. Our Mission: Providing connections between our communities thr

Clarksville, IA 50619 • (31.6 miles) • Full Time • 11/3/2026

Description: VT Industries in Clarksville, IA is a manufacturer of custom Architectural Wood Doors Current 2nd shift full-time opportunity Starting wage $22.59/hour 2:00pm-10:30pm Monday-Friday $1,500 New Hire Bonus Job Requirements:Experience with machine operation, forklift, hand tools preferred. Training can be provided. Skills needed: Strong work ethic. Able to work in a fast-paced environment. Able to work individually or with team members as assigned, maintaining a positive work environment. Excellent attendance work habit needed. Able to maintain a safe work environment by following all safety rules. Able to work 5 to 6 days a week and over 10 hours a day as required. Able to pass a Pre-employment /post-offer drug screen, physical and background check. Comprehensive benefit package

Waterloo, IA 50703 • (6.1 miles) • Full Time • 11/2/2026

Now Hiring - Industrial Engineer Ranew's Companies is seeking an Experienced and Qualified Industrial Engineer to join our team. Job Description We are seeking an Industrial Engineer to identify and reduce waste and inefficiencies in production processes. This role involves designing systems that effectively integrate workers, machines, materials, and information to improve productivity and product quality. The engineer will also develop and maintain efficient manufacturing routes and material flows, ensuring compliance with safety and design standards. Support for less complex projects may be required as needed. Location: Multiple Locations in Midwest Salary: TBD, Highly Competitive based on experience Job Type: Full-time (1st Shift) Benefits: Performance Bonus, Paid Holidays, Medical, De

Hiawatha, IA 52233 • (40.1 miles) • Full Time • 11/2/2026

CCB Packaging, a locally owned leader in the packaging industry, is looking for a 3rd shift Quality Assurance Technician to join our team! This position will handle all aspects of quality inspections as well as focus on continuous improvement of our internal programs. Responsibilities include: Conduct routine production line checks to verify quality and food safety standards are being met. Monitor the flow of product throughout the production process to ensure products are meeting quality standards. Identify and report paperwork and production line errors and promptly communicate issues to appropriate personnel. Perform accurate data entry of quality, production, inspection, and other required information into company systems. Adjust and troubleshoot weight scales to ensure accurate produc

New Hampton, IA 50659 • (43 miles) • Full Time • 11/2/2026

Precision of New Hampton has an immediate opening for a Tool and Die Maker at our New Hampton, IA Facility. This opportunity is an office position and is a non-operator roll. They would work w/ the CNC Programmers and Machinists very closely. This is not a normal Tool and Die Maker role . This person will be involved in all the steps of fabrication and design. They will be part of the initial design process all the way to the end of final production. They will help come up with ideas on how to build parts, implement into drawings, and be involved with actual production. This position will write, maintain and help troubleshoot our programs for our CNC Mills, CNC Lathes, and EDM Wire Cutting. If you are looking for a career where you get to be involved in many layers of the business manufact

Waterloo, IA • (6.4 miles) • Full Time • 11/1/2026

WHO WE ARE We are a company where people matter . We are family driven . We are financially strong . And we are looking for problem-solvers to join our growing team. BENEFITS Up to 10% Retirement Contribution $5,000 SIGN-ON BONUS $1/hr Shift Premium! $600 per Year Wellness Incentive Two Weeks Starting Paid Time Off Medical, Dental, and Vision - Eligible f irst day of the month following hire date. JOIN A TOP WORKPLACE - https://www.youtube.com/watch?v=7nlFHnnfvhk Production Operator The primary purpose of this position is to load and unload bulk products, manufacture liquid products, and package finished products in non-bulk containers that meets the needs and quality of our customers. The hours for this position are Monday-Thursday 12:00pm-10:30pm CST. Training will take place on 1st shif

Janesville, IA • (17 miles) • Full Time • 10/31/2026

Manufacturing / Design Engineer Our client is a growing manufacturer of construction, agricultural, and industrial products. They are seeking a hands-on Manufacturing/Design Engineer to lead new product design for their construction equipment line, with a focus on machined and fabricated components. This is a true design role, where you will see your work go from concept to finished product built in-house. POSITION OVERVIEW Reporting to the Lead Engineer, you will join a small, collaborative engineering team of three. Your time will be focused primarily on new product development, with the remainder spent supporting the production floor and collaborating with the team. As part of a close-knit company of about 30 people, you will have visibility, influence, and the opportunity to make a rea

Shell Rock, IA 50670 • (24.6 miles) • Full Time • 10/31/2026

Production Team Members work efficiently, in a safe manner, maintain high quality standards, and help to ensure that guest expectations are met. Positions include forklift operation, machine operation, and product assembly. There are many advancement opportunities to move into leadership positions and grow with the company. Primary Responsibilities: Forklift positions Loading material in the warehouse, yard, and onto outgoing trucks. Manual counting and scanning of units. Scanning products into computer system and using computer to pick orders. Machine Operation positions Learn the machine controls to ensure that product is assembled or produced properly. Use pneumatic gun, automatic bander and application of ID labels. Perform any necessary corrective actions to maintain a quality product

Steamboat Rock, IA 50672 • (42.7 miles) • Full Time • $24.00 / hr • 10/31/2026

As Pine Lake Corn Processors continues to grow and expand, we're seeking talented individuals to join us for an exciting future in renewable energy. If you're looking for a career where your contributions matter, your skills are valued, and growth opportunities are real, we encourage you to apply. Mash Prep Operator Location: Pine Lake Facility – Steamboat Rock, IA Company: Pine Lake Corn Processors (PLCP), a subsidiary of Innovative Ag Services Status: Full-Time Overview Pine Lake Corn Processors (PLCP) is seeking a dedicated Mash Prep Operator to join our growing operation in Central Iowa’s ag processing industry. If you are safety-minded, mechanically inclined, and take pride in maintaining high operational standards, we encourage you to apply. Compensation & Benefits · Starting wage of

Cedar Rapids, IA 52401 • (44.9 miles) • Full Time • $28.94 to $30.88 / hr • 10/31/2026

CNC Milling Technician Multi-Axis VMC (Cedar Rapids) Imagine starting your shift in a clean, climate-controlled shop. You review the print, set up tools and workholding, and bring a multi-axis VMC to lifetransforming raw stock into precision parts that meet spec the first time. When & Where Location: Cedar Rapids Hours: Monday–Friday, 7:00 am–3:30 pm Environment: Climate controlled Pay Growth You Can Count On Min = $28.94 3 Months = $29.35 6 Months = $29.87 9 Months = $30.36 12 Months = $30.88 Your Impact Set up and operate CNC mills for milling and drilling operations per work instructions. Assemble cutting tools, secure workpieces, and align to specifications. Input machine directions or load programs to meet part requirements. Continuously observe machine behavior and part quality; veri

Waterloo, IA 50704 • (4.6 miles) • Full Time • 10/30/2026

Title: Materials Engineer I - Materials Engineering // Materials Engineering Technician Location: Waterloo, IA - 50704 Duration: 24 Months Contract (possible extension) Major Purpose: This job is for a Materials Engineering lab technician whose everyday assignments and tasks may vary from routine to infrequent. Duties are relatively broad in scope and may require evaluations by the position holder. The holder of this position will perform materials engineering supporting tasks or complex laboratory analytical functions with limited engineering oversight. Major Duties: Completes tasks involving preparation or analysis of material samples/components/processes with minor engineering oversight for moderately complex activities. Develop, recommend and implement analytical or process changes nee

Waterloo, IA 50704 • (4.6 miles) • Full Time • 10/30/2026

Materials Engineer I - Materials EngineeringMajor PurposeAssists and supports materials engineering work that is narrow in scope and responsibility. This job fully integrates an individual into the engineering culture by performing professional materials engineering (e.g., chemicals, plastics, finishes, metallurgy, heat treat, ceramics, etc) assignments and specific engineering tasks that are limited in scope, depth and degree of skill required. Work plans and decisions are reviewed by supervisors.Major Duties? Carry out a range of activities under the guidance of more senior colleagues to support the analysis of information and the specification of the methods and process steps, as well as the plant, machinery, and equipment, required to design and continuously improve manufacturing or ma