Mitchellville, IA 50169 • (34.7 miles) • Full Time • 9/16/2026

Exceed your potential with Volt Volt is immediately hiring for Quality Control Inspectorin Des Moines, IA.As aQuality Control Inspector you will:Implement quality assurance policies and procedures.Perform routine inspections and quality tests.Inspect products to ensure that they meet quality standards and the customer’s bill of materials.Document deficiencies and errors of products and confirm corrections of these errors.Operate a manual hydraulic pallet jack.This is a full timeopportunity.The ideal candidate will have: Preferred experience in wiring or quality assurance. High school diploma or equivalent required. Ability to read blueprints and exploded-view drawings. Exercise common sense when making decisions. Working knowledge of tools, methods, and concepts of quality assurance. Excep

Baxter, IA 50028 • (19.5 miles) • Full Time • 9/15/2026

Note - Note - Visa sponsorship is not available, now or in the future, for this position.3rd Shift Welding Manufacturing Engineer – Davenport Works (Fabrication Department) Schedule • 3rd Shift: 10:00 PM – 6:00 AM • Overtime required • Weekend coverage required based on production needs Primary Responsibilities • Support 3rd shift production operations to maintain uptime and productivity • Assist operators, maintenance teams, and salaried staff with production issues • Troubleshoot: • MES (Manufacturing Execution System) issues • Automated welding processes • Manual welding processes • Train operators on processes and equipment • Support implementation and execution of new and existing manufacturing processes • Develop and maintain process documentation • Participate in process improvement

Ankeny, IA 50021 • (40.3 miles) • Full Time • 9/15/2026

Job DescriptionJOB TITLE: Production Support SpecialistREPORTS TO: Production SupervisorFLSA: Non-exemptJOB SUMMARY: Performs tasks in the operation of the micro mold and small mold production departments at Accumold. Uses the quality system and work instructions that have been established to complete the production of plastic parts correctly and independently. This position follows the bottlenecks in production output to increase meeting customer requirements. All though the position reports to one department they will move to other departments as needed.ESSENTIAL DUTIES AND RESPONSIBILITIES:Develops a thorough understanding of the operation of micro mold, small mold, LSR, ISMECA, and manual machinery.When working on ISMECA equipment, performs required IQMS lot setup, scanning parts to th

Pella, IA 50219 • (42.3 miles) • Full Time • 9/15/2026

Actively Hiring! | Design Engineer | Pella, IA | Apply Now!Job DescriptionThe Design Engineer drives continuous improvement of utility equipment across the entire product lifecycle. In this role, you develop and implement design enhancements that improve performance, reliability, quality, safety, and cost, while collaborating closely with cross-functional teams to support customer satisfaction through product improvements and effective issue resolution.ResponsibilitiesDrive continuous improvement initiatives for utility equipment throughout the product lifecycle, focusing on performance, reliability, quality, safety, and cost.Develop and implement design enhancements that optimize product functionality and manufacturability.Create and refine mechanical designs, including sheet metal compon

Pella, IA 50219 • (42.3 miles) • Full Time • 9/15/2026

Mechanical Assembler Job DescriptionJob Summary Skilled in assembling complex mechanical systems and components with a strong emphasis on mechanical aptitude. Requires proficiency in using precision hand and power tools (wrenches, torque drivers, micrometers, etc.) to assemble, align, and test mechanical, hydraulic, pneumatic, and electro-mechanical systems. Candidates must demonstrate advanced problem-solving skills and hands-on experience in mechanical assembly, repair and trouble shootingKey ResponsibilitiesInterpret and follow detailed technical drawings, blueprints, schematics, and work instructions to assemble machinery, equipment, and subassemblies with high precision.Perform complex fitting, alignment, and fastening of mechanical components using tools such as torque wrenches, cal

Story City, IA 50248 • (37.8 miles) • Full Time • 9/14/2026

Position SummaryThe Process Engineer is responsible for designing, developing, optimizing, and sustaining manufacturing processes that ensure safe, efficient, cost-effective, and high-quality production. This role focuses on continuous improvement, process standardization, capacity expansion, waste reduction, and implementation of best practices to improve operational performance. The Process Engineer works closely with Production, Quality, Engineering, Maintenance, Supply Chain, and Operations teams to deliver reliable manufacturing processes that meet customer and business requirements.Key ResponsibilitiesManufacturing Process DesignDesign and develop manufacturing processes for new and existing products, including fixtures, workholdings, components, etc. for production.Design and develo

Waterloo, IA 50701 • (39.1 miles) • Full Time • 9/12/2026

Material Handler Job DescriptionAs a Material Handler, you will be responsible for sequencing products according to customer specifications, using RF scanning equipment to verify sequencing information, and operating hand tools and assembly equipment. You will also sort products for quality checking and defect containment, perform quality checks per company/customer specifications, and ensure products are labeled and free from defects. Additional duties may be assigned as required.ResponsibilitiesSequence products per customer specifications.Use RF scanning equipment to verify sequencing information.Operate hand tools, assembly equipment, and basic office equipment.Sort products for quality checking and defect containment.Perform quality checks per company/customer specifications.Ensure pr

Ankeny, IA 50021 • (40.3 miles) • Full Time • 9/11/2026

Mold Maker - All Shifts AvailableAnkeny, IA Direct Hire | Full-Time $25-$30/hour + 10-15% Shift Differential + Quarterly Profit SharingBuild Precision Tooling That Makes a Difference:Are you an experienced Mold Maker, Tool & Die Maker, Toolmaker, or Precision Machinist looking for an opportunity to work on highly advanced tooling projects?Join a growing precision manufacturing organization where you'll build new injection molds used to produce critical components for medical devices and other high-precision applications. This is an opportunity to take ownership of mold builds from start to finish while working in a clean, climate-controlled tool room with industry-leading equipment and technology.Shifts Available:2nd Shift: 2:00 PM - 10:30 PM3rd Shift: 10:00 PM - 6:30 AMWeekend Days: 7:00

Waterloo, IA • (42.5 miles) • Full Time • 9/11/2026

Title: Maintenance PlannerLocation: Waterloo, IADuration: 24+ Months (possible extension)Shift: 1st shift (7 am to 3:30 pm). Periodic off-shift hours may be required as needed depending on projects. OT hours will be possible (either during regular shift or weekend work).Note - Bachelor’s degree from an accredited U.S. university required.Visa sponsorship is not available, now or in the future, for this positionMajor PurposeThe Maintenance Planner is responsible for planning, scheduling, and coordinating corrective and preventive maintenance activities for production equipment, facilities, and supporting infrastructure. This role works closely with maintenance personnel, operations, engineering, and suppliers to ensure maintenance work is prioritized, properly planned, and executed safely a

Ames, IA 50010 • (34.9 miles) • Full Time • 9/10/2026

Outside Plant (OSP) Technician Installed, maintained, repaired, and troubleshot underground and aerial telecommunications infrastructure, including fiber optic and copper cable networks.Supported outside plant construction projects by performing cable placement, testing, utility locating, conduit installation, and network restoration activities.Interpreted construction blueprints, engineering drawings, and utility maps to ensure accurate and efficient project execution.Operated hand tools, power tools, and specialized construction equipment for cable installation, maintenance, and repair.Assisted with trenching, directional boring, and conduit placement while adhering to safety and quality standards.Conducted inspections and preventive maintenance to identify network issues and minimize se

Cedar Falls, IA 50613 • (40.5 miles) • Full Time • 9/9/2026

Job Title: Engineer Quality IClient: Heavy Machine Manufacturing CompanyLocation: Waterloo, IA 50613-8000Duration: 2 Years – Possible ExtensionShift: 1st Shift | 7:00 AM – 3:30 PMOvertime: May be scheduled at end of shiftWork Setting: Onsite | Shop FloorDescription:Job SummaryEntry-level Quality Engineering role supporting manufacturing quality, process improvement, inspections, testing, and engineering activities. Ideal for recent graduates with manufacturing internship experience.

Ankeny, IA 50021 • (40.3 miles) • Full Time • 9/5/2026

PURPOSEThe Mechanical BIM/VDC Detailer will develop 3D models, partnering with the construction team to coordinate and clash model content. Using the coordinated model, the BIM/VDC Detailer will produce spool, coordination, and install drawings, as well as review completed work, to include checking for errors and verifying against contract documents. This person will create and develop relationships supportive of the Baker Group Core Focus with internal team members and external clients, as well as maintain and grow the “Client for Life” concept with new and existing clients.Performs related work as required.ESSENTIAL FUNCTIONS AND RESPONSIBILITIESThe following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and a

Waterloo, IA • (42.5 miles) • Full Time • 9/5/2026

Job Title: Maintenance Planner Client: Heavy Machine Manufacturing Company Location: 300 W Commercial St, Waterloo, IA 50703 Duration: 24 Months Shift: 1st Shift | Monday–Friday | 7:00 AM–3:30 PM Work Type: Fully OnsiteRole SummaryPlan and schedule ongoing and preventive maintenance for plant equipment, buildings, and facilities. Coordinate maintenance work, resources, parts, materials, and skilled trades personnel to support equipment reliability and uptime.Key ResponsibilitiesReceive, prioritize, plan, and assign maintenance requests.Schedule preventive maintenance for production and facility equipment.Coordinate work for mechanics, toolmakers, pipe fitters, tool grinders, machine hands, and other maintenance personnel.Provide technical support by obtaining drawings, identifying parts/to

Bondurant, IA • (36.5 miles) • Full Time • 9/4/2026

Are you ready to take the next step from skilled Installer to jobsite leader? At Groundworks, North America’s leader in foundation solutions, our CoForeman are driven professionals who are ready to build their skills to grow into a Foreman position. Working sidebyside with an experienced Foreman, you’ll learn how to lead crews, manage daily jobsite operations, and uphold our standards for quality, safety, and customer satisfaction. With handson leadership training, industry-leading certification program, and a clear path to advancement, this role is built for those who want to develop their leadership skills while continuing to do impactful work in the field.The Co-Foreman is a leader as well as a contributor on our crew and an integral part of our success. The Co-Foreman coordinates tasks

Des Moines, IA 50317 • (43.9 miles) • Full Time • 9/16/2026

We are looking for a PRODUCTION WORKER to join our DES MOINES, IA plant. As a general laborer with Rinker Materials, you will contribute to one of the nation's largest manufacturers of reinforced concrete pipe, box, bridge, and other related infrastructure products for stormwater and sanitary applications.You will work become part of a community that prioritizes not only our customers but also values our dedicated and loyal employeesWhy apply?Competitive payMedical and prescription drug coverageDental and vision coverageHealth savings and flexible spending account401(k) with company matchLife insurance and disability coveragePaid vacationPaid holidaysGrowth & Development opportunitiesEmployee DiscountsMental Health through our Employee Assistance ProgramWellness benefits including low-cost

Slater, IA 50244 • (40.3 miles) • Full Time • 9/16/2026

Company Description Syngenta Seeds is one of the world’s largest developers and producers of seed for farmers, commercial growers, retailers and small seed companies. Syngenta seeds improve the quality and yields of crops. High-quality seeds ensure better and more productive crops, which is why farmers invest in them. Advanced seeds help mitigate risks such as disease and drought and allow farmers to grow food using less land, less water and fewer inputs.Syngenta Seeds brings farmers more vigorous, stronger, resistant plants, including innovative hybrid varieties and biotech crops that can thrive even in challenging growing conditions.Syngenta Seeds is headquartered in the United States.Job Description Operate equipment and systems in accordance with site specific activities.Drive Forklift

Ames, IA 50010-9602 • (36.7 miles) • Full Time • 9/15/2026

Description: Innovative Consulting & Management Services (ICMS) is a Professional & Technical Management Consulting firm with over 20 years of consulting experience. We offer technical professional services to Federal and State Governments, and Commercial clients.ICMS is a Small Business and Certified HUBZone employer. We deliver value to our clients by combining deep industry knowledge with strong functional capabilities. Our focus is to manage cost-effective programs while at the same time mitigating risk and improving results. Our success is about teamwork, a coordinated effort from all disciplines, from clients to consultants and most important, it’s about delivering on our commitments.The purpose of the Machinery Maintenance Mechanic position is to provide operations and maintenance s

Marshalltown, IA 50158 • (1.1 miles) • Full Time • 9/15/2026

Position Summary:This position is responsible for learning all production, management, and supervision operations of their assigned Midwest Manufacturing production facility.Primary Responsibilities:ProductionEnsure that all product is built in the most efficient wayEnsure that all orders are filled within an acceptable lead time.Involved in setting and evaluating production quotas, both quantity and qualityManage and lead team members in your areaWork with supervisors and managers in your area to accomplish goalsCome up with innovative ideas to improve current processesFacility Maintenance and UtilizationKeep all production facilities in good repair, orderly, and cleanUse equipment to capacity to fill ordersSafetyEnsure all safety policies are enforced, all training is up to date, and all

Ames, IA 50010 • (34.9 miles) • Full Time • 9/15/2026

Senior Electrical Engineer – MEP ConsultingLocations: Ames / Des Moines, Iowa or Omaha, NebraskaJob Type: Full-TimeCompany: Resource Consulting Engineers, LLCAbout the OpportunityResource Consulting Engineers (RCE) is seeking an experienced Senior Electrical Engineer to join its growing MEP consulting team in the Ames/Des Moines, Iowa or Omaha, Nebraska area.This is a hands-on engineering and project leadership position for an electrical engineer with significant experience designing building systems within an MEP consulting engineering or A/E design firm. The Senior Electrical Engineer will lead electrical design efforts, coordinate directly with clients and project teams, and help deliver projects within the education, government, healthcare, and institutional markets.This is not a remot

Story City, IA 50248 • (37.8 miles) • Full Time • 9/15/2026

Description: SUMMARY: Assist operator in operation of the press.Press Operator 2 (WH2)SHIFT: 12 hr DaysESSENTIAL DUTIES AND RESPONSIBILITIES include the following:Support operator’s efforts to meet budgeted targets.Hang substrates on press.Know register control system.Understand all SOP's and to be trained in them.Run press to approved specifications.Properly fill out all paperwork, daily reports, final release, consumption reports, and roll tickets.Know and follow all safety rules.Prep print carriages.Make up doctor blades.Actively participates in safety programs and makes safety observations.Other duties as assigned.Requirements: QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed

Waterloo, IA 50701 • (39.1 miles) • Full Time • 9/15/2026

Mechanical Design Engineering ManagerThe Mechanical Design Engineering Manager is responsible for leading a team that manages a defined portion of standard product offerings to support the production schedule.This role focuses on ownership, standardization, continuous improvement, and lifecycle support of existing product platforms, while ensuring designs are manufacturable, cost-effective, compliant, and scalable.The role works closely with other Sr. Engineering Managers leading sub-teams within the department to ensure alignment, consistency, and effective execution across the product portfolio, while supporting Manufacturing, Warranty, and Customer Service functions, and occasionally Sales.Position Responsibilities:Lead, develop, and manage a team of product design engineers supporting

Waterloo, IA 50701 • (39.1 miles) • Full Time • 9/15/2026

Production Supervisor – Manufacturing Leadership (1st, 2nd, & 3rd Shifts Available)Location: Cedar Valley / Northeast Iowa AreaCompensation: $75,000 – $85,000 Base + Comprehensive BenefitsAre you an operational frontrunner who thrives on the plant floor rather than behind a desk? A premier regional manufacturer is actively expanding its leadership bench. We are seeking dynamic, hands-on leaders to drive shift performance, mentor production crews, and champion workplace safety.Multiple opportunities are open across all three shifts:1st Shift: Morning Schedule2nd Shift: Afternoon / Evening Schedule3rd Shift: Overnight ScheduleCore ResponsibilitiesFloor Leadership: Lead daily shift execution, balance line staffing, and actively engage alongside the crew (approx. 50% hands-on involvement) to e

Ellsworth, IA 50075 • (39.4 miles) • Full Time • 9/15/2026

Description: Job SummaryThe Production Associate is responsible for supporting daily production operations by preparing, processing, packaging, and inspecting products in compliance with all safety, quality, and regulatory standards. This role requires adherence to Good Manufacturing Practices (GMPs), food safety protocols, and a commitment to maintaining a clean and safe work environment.General Duties and ResponsibilitiesOperate production equipment and machinery safely and efficiently in accordance with company procedures.Monitor production to ensure consistent product quality and report any issues or deviations.Perform quality checks on raw and finished products, including visual inspections, temperature checks, and labeling accuracy.Follow all GMPs, food safety guidelines, sanitation

Ankeny, IA 50021 • (40.3 miles) • Full Time • 9/15/2026

Be the difference between downtime and delivery.Picture this: a press alarms mid-run, parts show short shots, and a customer order is on the line. You step inverify material, tweak barrel temps, adjust injection velocity, confirm pack/hold, and fine-tune robotics. Scrap drops. The line stabilizes. That’s the impact you’ll make at Revere Plastics Systems.Your missionOwn mold setups and flawless machine startupsDiagnose root causes fast; lock in stable processes that cut defects and scrapKeep presses producingattack downtime and protect uptimeProgram and adjust 3-axis robotics to improve repeatability and safetyStreamline mold changes for better throughputRespond to production and quality concerns in real timeDocument parameters and maintain process standardsMentor operators; champion a clea

Ames, IA 50014 • (40.4 miles) • Full Time • 9/15/2026

Description: The CNC Operator is responsible for setting up, operating, and monitoring CNC machines to manufacture precision-machined parts according to specifications, for final assembly. This role requires strong attention to detail, mechanical aptitude, and the ability to read blueprints and technical documents to ensure the highest level of accuracy and quality. The ideal candidate will have experience in machine operation, tool adjustments, and troubleshooting, with a focus on maintaining production efficiency, accuracy and quality. Requirements: Key Responsibilities:Set up and operate CNC machines to produce parts according to technical drawings and work ordersLoad raw materials and adjust machine settings for precise production runsInspect finished products for quality and accuracy

Ankeny, IA • (41.6 miles) • Full Time • 9/15/2026

Industrial Design Engineer | $75,000 to $95,000 | Full Time | Direct Hire What Matters Most • Competitive base salary of $75,000 to $95,000 • Locations: Ankeny, Iowa or Kansas City, Missouri • Full time direct hire opportunity with long term career growth • Join a growing engineering team supporting industrial facility design and construction projects • Opportunity to work on food processing, grain handling, feed manufacturing, seed processing, and industrial manufacturing facilities • Collaborative culture that values teamwork, humility, innovation, and continuous improvement • Comprehensive benefits package including medical, dental, vision, retirement, and paid time off Job Description Our client is growing and looking to add an experienced Industrial Design Engineer who can make an im

Waterloo, IA • (42.5 miles) • Full Time • 9/15/2026

Production Supervisor – 1st, 2nd & 3rd Shifts Location: Waterloo, IASalary: $75,000–$85,000 annuallyJob Type: Full-Time, Direct HireOpenings: 7We are seeking experienced Production Supervisors to join a manufacturing operation in Waterloo, Iowa. Multiple openings are available across all three shifts.Available Shifts1st Shift: 7:00 AM–3:30 PM2nd Shift: 3:00 PM–11:30 PM3rd Shift: 11:00 PM–7:30 AMThe Production Supervisor will lead manufacturing employees, organize and monitor workflow, maintain production and quality standards, support workplace safety, and ensure materials and resources are available to meet production goals.Responsibilities Supervise manufacturing employees and coordinate daily production activities.Schedule and assign personnel based on production requirements and priori

Waterloo, IA • (42.5 miles) • Full Time • 9/15/2026

The Production Supervisor will be part of the manufacturing team in support of the Director of Operations and Production Manager. Manufactures products by supervising staff; organizing and monitoring workflow; acts as a quality inspector; serves as a safety coordinator, material handler, and trainer for the area of responsibility. DUTIES / RESPONISIBILITIES Complete production plan by scheduling and assigning personnel; accomplishing work results; establishing priorities; monitoring schedules; resolving problems; reporting results of the processing flow on shift production summaries.Accomplish manufacturing staff results by communicating job expectations; planning, monitoring, and appraising job results; coaching, counseling, and disciplining employees; initiating, coordinating, and enfor

Bondurant, IA 50035 • (35.6 miles) • Full Time • 9/11/2026

Description: Hulcher Services is seeking a motivated and success-driven Apprentice Operator I. You will play a vital role in transporting, operating and the servicing of assigned heavy equipment used in clearing railroad derailments by lifting and moving derailed railway cars and locomotives.About Us:Hulcher Service is an industry leader with more than 500 employees and over 25 divisions located in the United States and Mexico assisting customers with derailments as well as engineering work, track maintenance, disaster response, and environmental projects.What You'll Do:Drive tractor-trailer or escort vehicles.Material handling of heavy steel chains, blocks and steel cables, and other devices.Climbing and crawling on and under derailed railroad cars.Maintenance, cleaning and setup of equip

Altoona, IA 50009 • (39.2 miles) • Full Time • 9/10/2026

BLACKRIVER ASSEMBLY LEADSchedule: Monday-Thursday 5am-3:30pm Some Friday's as overtimeSummit Products is seeking a dedicated and experienced Manufacturing Lead to oversee our Assembly operations. This role is essential for ensuring that our products meet the highest quality standards while maintaining efficiency and productivity within our manufacturing team. The ideal candidate will have a strong background in assembly processes, an eye for detail, and the ability to read and interpret blueprints.Key Responsibilities:Lead Assembly Operations:Supervise and mentor a team of assembly workers, providing guidance and support to ensure that all products are assembled accurately and efficiently.Quality Assurance:Implement and monitor quality control measures throughout the assembly process, ensu

Des Moines, IA 50317 • (43.9 miles) • Full Time • 9/10/2026

Join Wrench ‘N Go as a Production Worker and assist in the process of prepping vehicles for the auto salvage yard. This is the perfect role for someone with hands-on automotive experience whether from an auto parts store, salvage/recycling yard, automotive service center, or repair shop.Why Join Us:Competitive pay & benefits.Work in a fast-paced automotive environment.Expand your knowledge of car parts, vehicle systems, and recycling operations.Be part of a team that values quality and customer satisfaction.Key ResponsibilitiesA Vehicle Dismantler is responsible for efficiently dismantling cars, including extracting gasoline and all other fluids, removing batteries, mercury switches, non-conformities, catalytic converters, and other items. Decommission cars by utilizing a system of fluid a

Cedar Falls, IA • (40.8 miles) • Full Time • 9/9/2026

WHO WE AREWe are a company wherepeople matter.We arefamily driven.We arefinancially strong.And we are looking for problem-solvers to join our growing team. BENEFITSUp to 10% Retirement Contribution$600 per Year Wellness IncentiveFront-loaded Paid Time OffMedical, Dental, and Vision - Eligible first day of the month following hire date.JOIN A TOP WORKPLACE - https://www.youtube.com/watch?v=7nlFHnnfvhkCONTROLS ENGINEERThe Controls Engineer is an individual contributor responsible for evaluating, designing, programming, commissioning, and sustaining Hydrite's control systems (PLC/DCS/HMI) and related instrumentation. This role executes standards, implements changes through the MOC process, maintains Maximo PM/calibration plans, and ensures reliable data collection and historian integrations t

Ellsworth, IA 50075 • (39.4 miles) • Full Time • 9/9/2026

Description: Best Veterinary Solutions Inc., has an immediate opening for a full-time Production Team Member. This position works 7:00 AM – 5:30 PM Monday - Thursday in our climate-controlled Ellsworth, Iowa facility. Our production team assist with various areas within the plant while maintaining efficient production processes according to Good Manufacturing Practices (GMP).Responsibilities include:Maintain consistent, reliable attendance and punctuality in accordance with company policy to ensure production and warehouse operations run efficiently.Follow safety rules, work policies and procedures per training/instructions.Stage bulk/bagged raw materials.Safely operate production equipment, forklifts and pallet jacks.Prepare packaging (labels and lot number) with accuracy and attention to

Ankeny, IA 50021 • (40.3 miles) • Full Time • 9/9/2026

Mold Builder / Mold MakerLocation: Ankeny, IAPay: $25–$30/hour + Shift Differential + Quarterly Profit SharingAvailable Shifts2nd Shift: 2:00 PM–10:30 PM (+10%)3rd Shift: 10:00 PM–6:30 AM (+15%)Weekend Shifts: (+20%)About the OpportunityWe are seeking skilled Mold Builders, Mold Makers, Tool & Die Makers, and Precision Machinists to join a growing Tool Room team supporting the production of highly engineered micro-sized components used in life-saving medical devices, aerospace applications, and advanced technologies.This is not a production machining role. You will build brand-new precision steel molds from start to finish while working with some of the most advanced tooling and machining equipment in the industry.Projects involve extremely tight tolerances often measured in microns requir

Ames, IA 50010 • (34.9 miles) • Full Time • 9/7/2026

Location: Huxley, IAReports to: Shop Supervisor Employment Status: Full-timeSalary Range: $75,000 - $90,000 annuallyOther Compensation & Benefits: Health Insurance, Dental Insurance (100% employer paid), Life Insurance (100% employer paid), Profit sharing, 401(k), ESOP RetirementAbout Diamond Surface, Inc.Diamond Surface, Inc. is a Minnesota-based heavy-highway contractor with more than 35 years of experience specializing in concrete grinding, grooving, repair, and sealing. We are proud to be recognized as a Best Contractor in Construction and are known nationwide for setting the standard for quality, innovation, and professionalism in our field. We are a rapidly growing, team-oriented organization that believes our success starts with hiring and supporting exceptional people. In 2024, we

Des Moines, IA 50317 • (43.9 miles) • Full Time • 9/7/2026

Description: Must be able to work the following shift 6 AM- 6 PM on a 2-2-3 schedule. Operators start at $21.00 per hour. Operators are eligible for quarterly bonuses, as well! This position must pass a background check and drug screen.Who we are and what we value:Feed Energy works at the intersection of feed, fuel, and agriculture, building a nearly four-decade legacy of stewardship in various industries. We support how America nourishes its people and powers its economy. Our team is made up of growth-minded individuals, who are dedicated to transforming global practices in feeding and fueling, driving innovation across the industries we serve. We create circular economies, developing sustainable, low-carbon products and processes. Join us if you're looking for a dynamic environment to co

Altoona, IA 50009 • (39.2 miles) • Full Time • 9/6/2026

COMPANY OVERVIEWWe appreciate your interest in joining our team! At Robinson, Inc. we pride ourselves on our manufacturing solutions and ownership culture, which support the industries we serve and our local communities. Robinson is employee-owned and is driven by a dedicated team of skilled professionals that value trust, loyalty, teamwork, integrity, and accountability as the foundations of our organization. We strive to provide customer service that goes above and beyond the standard.Click here to view our Benefits SnapshotJOB OVERVIEWThe Manufacturing Engineer plans and designs manufacturing systems involving material flow, automation, fixturing, work content balancing, support future growth through capacity enhancements, and new facility layout planning/executing. Works collaborativel

Waterloo, IA • (42.5 miles) • Full Time • 9/6/2026

Company Description manufacturing companyJob Description This is a Quality and Continuous Improvement Manager position with a company that manufactures metal parts and assemblies. People with appropriate experience who come from similar manufacturing companies are encouraged to apply.This position is located in Northern Iowa. Relocation assistance is available.You will be responsible for maintaining the company’s quality management system AND leading the company’s strategy for continuous improvement.Oversee quality audits and corrective actionsTrack critical metrics about first-pass yield and scrap/reworkMaintain the QMS to meet customer, regulatory, and ISO requirementsManage suppliers, including incoming inspectionLead a Quality/Continuous team, ensuring that corporate objectives are met

Huxley, IA 50124-5011 • (36.4 miles) • Full Time • 9/5/2026

Job Title: Packaging Line LeadFLSA: Non-ExemptDepartment: OperationsReports To: Production Supervisor Asst., Packaging / Production Supervisor, PackagingSummary: The Packaging Line Lead assists in the oversight of packaging and filling operations. The Line Lead will possess strong leadership skills, attention to detail, and a fast-paced and efficient workflow. The Lead will be responsible for coordinating and directing packaging line activities, ensuring quality control standards are met, and motivating team members to achieve production targets.Essential Duties and Responsibilitiesinclude the following:Oversee packaging line activities to ensure smooth and efficientAssign tasks to Packaging Line Technicians and Operators and ensure tasks are completed accurately and on time.Monitor produc

Altoona, IA 50009 • (39.2 miles) • Full Time • 9/4/2026

Job DescriptionAUTOMATION ENGINEER - Altoona LocationESCO Group’s vision is to be a leader in our marketplace as valued by our key stakeholders: our clients, employees,suppliers, community, and shareholders.The position of Automation Engineer will be part of the Automation team at ESCO Group. This position is acontributing technical resource for client projects and should have a basic understanding of PLC and HMIprocesses as well as IT/OT Networking. This position will be working alongside multi-disciplined engineers.OBJECTIVES YOU WILL MEETAs the Automation Engineer, you will be responsible for providing technical services alongside a highly technicalteam. Objectives include:• Assist with the design and implementation of industrial automation projects that improve operationalefficiency, p

Cedar Falls, IA 50613 • (40.5 miles) • Full Time • 9/4/2026

If you love hands-on learning and are interested in a career that you can grow with, then let’s work together.The Position:We are currently hiring aCrew Foremanfor our highway divisionat our Cedar Falls location. We are looking for candidates who are innovative, self-motivated, and interested in working with a growing company.In this role, candidates must have electrical and construction experience, experience with concrete and traffic control, as well as with equipment and blueprints. Candidates must work closely with Project Managers and field employees, adapt to changing work environments, actively engage in K&W Electric, Inc.’s safety policies, and be able to maintain a positive image of one’s self and of the Company.Our Mission:Providing connections between our communities through ele