West Des Moines, IA • (8.7 miles) • Full Time • 9/12/2026

Title: Mechanical Assembler ILocation: 811 Fourth Street, West Des Moines, IA 50265**Duration: 6 months possible temp to perm ****Pay Rate: $19/hr on W2 | (1ST SHIFT (7AM - 3:30 PM CST)**Pay Rate: $20/hr on W2 | (2ND SHIFT 3:30 PM - 12 AM CST)Job Description:Mechanical Assembler I is an entry level position. The purpose for an operator at this level is to gain a basic understanding of deburring and air grinding operations. Operators must obtain a basic level knowledge to deburr and clean parts in a manner necessary to produce precision parts with direct supervision by a more senior Mechanical Assembler with Deburring Certification (level II or above). Follows established standard work under general supervision in efforts to obtain certification within 120 days.Essential Responsibilities:Le

Ames, IA 50010 • (26.8 miles) • Full Time • 9/12/2026

Job Title: Assembly TechnicianJob DescriptionWe are seeking a dependable Assembly Technician to assemble products using hand and power tools in a fast-paced manufacturing environment. Previous assembly or manufacturing experience is preferred, but training is provided for motivated individuals.Responsibilities Assemble products and components according to work instructions.Use hand tools and power tools, including drills, impact drivers, and grinders.Inspect finished products to ensure quality standards are met.Meet daily production goals while working with a team.Maintain a clean, organized, and safe work area.Follow all company safety procedures.Essential Skills Experience using hand and power tools.Ability to follow written and verbal instructions.Basic math and measurement skills.Stron

Ankeny, IA 50021 • (12 miles) • Full Time • 9/12/2026

Job DescriptionJOB TITLE: Micro Mold Production WorkerREPORTS TO: Production SupervisorFLSA: Non-exemptJOB SUMMARY:Performs all of the tasks in the operation of the micro mold production machines at Accumold. Uses the quality system and work instructions that have been established to complete the production of plastic parts correctly and independently.ESSENTIAL DUTIES AND RESPONSIBILITIES:Develops a thorough understanding of the operation of micro mold machinery.Monitors assigned machines using established parameters. Following work instructions, checks assigned parts at regular intervals. Inspects product continuously to maintain highest quality parts.Keeps feeder bowls adequately filled. Monitors dryer and oven trays to maintain sufficient material for production run.Builds upon working

Ankeny, IA 50021 • (12 miles) • Full Time • 9/11/2026

Mold Maker - All Shifts AvailableAnkeny, IA Direct Hire | Full-Time $25-$30/hour + 10-15% Shift Differential + Quarterly Profit SharingBuild Precision Tooling That Makes a Difference:Are you an experienced Mold Maker, Tool & Die Maker, Toolmaker, or Precision Machinist looking for an opportunity to work on highly advanced tooling projects?Join a growing precision manufacturing organization where you'll build new injection molds used to produce critical components for medical devices and other high-precision applications. This is an opportunity to take ownership of mold builds from start to finish while working in a clean, climate-controlled tool room with industry-leading equipment and technology.Shifts Available:2nd Shift: 2:00 PM - 10:30 PM3rd Shift: 10:00 PM - 6:30 AMWeekend Days: 7:00

Ames, IA 50010 • (26.8 miles) • Full Time • 9/10/2026

Outside Plant (OSP) Technician Installed, maintained, repaired, and troubleshot underground and aerial telecommunications infrastructure, including fiber optic and copper cable networks.Supported outside plant construction projects by performing cable placement, testing, utility locating, conduit installation, and network restoration activities.Interpreted construction blueprints, engineering drawings, and utility maps to ensure accurate and efficient project execution.Operated hand tools, power tools, and specialized construction equipment for cable installation, maintenance, and repair.Assisted with trenching, directional boring, and conduit placement while adhering to safety and quality standards.Conducted inspections and preventive maintenance to identify network issues and minimize se

Clive, IA • (4.3 miles) • Full Time • 9/9/2026

Palmer Group has partnered with our client in their search for a CAD Designer/Programmer to join their team. This role will supportboth engineering and shop floor execution by creating and maintaining production drawings while programming and optimizing fabrication equipment. The position blends CAD design work with hands-on manufacturing support, translating customer inputs and internal requirements into accurate models, drawings, and machine-ready programs. The individual will also help manage drawing revisions and contribute to tooling, fixtures, and process improvements. Apply today!Work Model:On-SiteWhat You Will Do:Create and revise 2D drawings and 3D models based on sketches, instructions, and existing designsProgram and nest parts for CNC, laser, or similar fabrication equipmentMai

Des Moines, IA 50301 • (9.8 miles) • Full Time • 9/9/2026

Job Title: Quality Assurance TechnicianJob DescriptionWe are seeking a dedicated Quality Assurance Technician to join our dynamic team. In this role, you will utilize lab equipment to test finished products and components, ensuring they meet specified parameters. Your work will contribute significantly to our production, packaging, and warehousing functions.ResponsibilitiesPerform multiple process checks throughout production, packaging, and warehousing.Set up and calibrate HPLC and GC testing equipment.Receive, document, and enter batch testing results into specified systems.Analyze and report quality results to supervisors and managers.Conduct physical property testing using various instruments.Provide independent oversight of lab processes, verifying compliance with company standards an

West Des Moines, IA • (8.7 miles) • Full Time • 9/9/2026

Mechanical Assembler - 2nd ShiftLocation: West Des Moines, IAJob ID: #73130Pay Range: $19-21THIS ROLE IS 2ND SHIFT (3:30 PM - 12 AM CST)Role Overview: In a nutshell, the operator will disassemble and clean incoming product. Mechanical Assembler I is an entry level position. The purpose for an operator at this level is to gain a basic understanding of deburring and air grinding operations. Operators must obtain a basic level knowledge in order to deburr and clean parts in a manner necessary to produce precision parts with direct supervision by a more senior Mechanical Assembler with Deburring Certification (level II or above). Follows established standard work under general supervision in efforts to obtain certification within 120 days. The operator will typically refer problems or deviatio

Des Moines, IA • (12 miles) • Full Time • 9/5/2026

Benefits Start Day 1 for Full-Time Colleagues - No Waiting Period!For more information about our benefits, see below!We are proud to be a member of the Rentokil family of companies, the global leader in Pest Control and other services across more than 90 countries. We pride ourselves on being a trusted partner to many of the world's leading brands and serve consumer and business customers across multiple industries. We are extremely proud of our legacy of excellence and constantly work to fulfill our mission to "protect people, enhance lives, and preserve the planet."What do our Food Safety Specialists do?The primary purpose of this role is to support our hotel, restaurant, and grocery clients in upholding their brand standards, ensuring exceptional food quality, and delivering friendly, c

Ankeny, IA 50021 • (12 miles) • Full Time • 9/5/2026

PURPOSEThe Mechanical BIM/VDC Detailer will develop 3D models, partnering with the construction team to coordinate and clash model content. Using the coordinated model, the BIM/VDC Detailer will produce spool, coordination, and install drawings, as well as review completed work, to include checking for errors and verifying against contract documents. This person will create and develop relationships supportive of the Baker Group Core Focus with internal team members and external clients, as well as maintain and grow the “Client for Life” concept with new and existing clients.Performs related work as required.ESSENTIAL FUNCTIONS AND RESPONSIBILITIESThe following duties are typical for this job. These are not to be constructed as exclusive or all inclusive. Other duties may be required and a

Des Moines, IA • (12 miles) • Full Time • 9/4/2026

Job Description:Mechanical Assembler I is an entry level position. The purpose for an operator at this level is to gain a basic understanding of deburring and air grinding operations.Operators must obtain a basic level knowledge in order to deburr and clean parts in a manner necessary to produce precision parts with direct supervision by a more senior Mechanical Assembler with Deburring Certification (level II or above).Follows established standard work under general supervision in efforts to obtain certification within 120 days.The operator will typically refer problems or deviations to more experiences operators including Lead Technicians, Supervisors, or engineers.Responsibilities:Learn how to maintain and operate deburring tools.Learn how to read blueprints in order to verify work was

Urbandale, IA • (2.8 miles) • Full Time • 9/3/2026

Labor Solutions is hiring a reliableProduction Workerfor our Urbandale team. You will operate machinery, assemble products, and ensure quality standards. This is a consistent, daylight shift in a clean facility.Hours:7:30 AM – 4:00 PM (Monday – Friday)Pay:$18.50/hr. What You Will DoOperate Equipment:Run and monitor production machinery safely.Assemble Products:Build parts using blueprints and work orders.Inspect Quality:Check raw materials and finished goods for defects.Move Materials:Load, unload, and transport items up to 50 lbs.Maintain Workspace:Keep your station clean, safe, and organized.What We Are Looking ForReliability:Excellent attendance and reliable daily transit.Physical Stamina:Ability to stand and lift up to 50 lbs.Basic Skills:Good hand-eye coordination and tool skills.Team

Des Moines, IA • (12 miles) • Full Time • 9/2/2026

Job Type: Full Time, HourlyLocation: Onsite 4280 E 14th Street, Des Moines, IA 50313.Expected Hours of Work: Our hours of operation are Monday through Friday from 7:30AM to 5PM.Reports to: Vice President of Service OperationsAbout the CompanyElectric Pump and its family of companies have been in operation for the last 47 years providing fluid handling equipment to our customers in the industrial, municipal, and environmental markets. In addition, we are the largest pump service organization in the upper Midwest. Electric Pump is comprised of eight locations in seven states with approximately 140 employees. Our offices have a friendly, laid-back environment.Website:www.electricpump.comJob SummaryThe Shop Technician is responsible for performing in-house inspection, repair, maintenance, test

Johnston, IA • (4 miles) • Full Time • 8/23/2026

Are you ready to take the next step from skilled Installer to jobsite leader? At Groundworks, North America’s leader in foundation solutions, our CoForeman are driven professionals who are ready to build their skills to grow into a Foreman position. Working sidebyside with an experienced Foreman, you’ll learn how to lead crews, manage daily jobsite operations, and uphold our standards for quality, safety, and customer satisfaction. With handson leadership training, industry-leading certification program, and a clear path to advancement, this role is built for those who want to develop their leadership skills while continuing to do impactful work in the field.The Co-Foreman is a leader as well as a contributor on our crew and an integral part of our success. The Co-Foreman coordinates tasks

Story City, IA 50248 • (36.8 miles) • Full Time • 8/15/2026

Position SummaryThe Process Engineer is responsible for designing, developing, optimizing, and sustaining manufacturing processes that ensure safe, efficient, cost-effective, and high-quality production. This role focuses on continuous improvement, process standardization, capacity expansion, waste reduction, and implementation of best practices to improve operational performance. The Process Engineer works closely with Production, Quality, Engineering, Maintenance, Supply Chain, and Operations teams to deliver reliable manufacturing processes that meet customer and business requirements.Key ResponsibilitiesManufacturing Process DesignDesign and develop manufacturing processes for new and existing products, including fixtures, workholdings, components, etc. for production.Design and develo

Grimes, IA 50111 • (1.2 miles) • Full Time • 9/12/2026

Do you have the need for speed? Do you thrive in a fast paced, energetic work environment that focuses on serving our customers? If so, K1 Speed is the place for you. As the nation’s indoor electric karting leader and innovator for over the past decade, K1 Speed does not compromise on the quality and value of the product we offer. Through our industrial go-karts and excellent staff, our passion is to show the world how fun karting can actually be. As a Track Operator, you will be at the core of the day to day operations, leading and guiding our customers to a fun, safe karting experience. Is this you?Duties and Responsibilities:Provide excellent customer service to all K1 Speed visitorsRun races precisely, on time and safelyMaintain track cleanliness at all timeslifting requiredStanding fo

Urbandale, IA 50323 • (2.9 miles) • Full Time • 9/12/2026

Key Responsibilities:Respond to roadside and on-site service calls using a fully equipped service truck.Mount, dismount, balance, and repair all types of tires, including passenger, light truck, commercial truck, and industrial.Diagnose and repair tire-related issues and perform light mechanical repairs as needed.Inspect tires and wheels for wear, damage, and proper inflation.Perform fleet inspections and preventative maintenance checks when required.Operate tire pressure monitoring systems (TPMS) and other diagnostic tools.Maintain the service truck, tools, and equipment in safe operating condition.Follow DOT regulations, company safety policies, and traffic laws at all times.Provide exceptional customer service, including clear communication of service details and timelines.Assist with w

Ankeny, IA • (10.5 miles) • Full Time • 9/12/2026

Industrial Design Engineer | $75,000 to $95,000 | Full Time | Direct Hire What Matters Most • Competitive base salary of $75,000 to $95,000 • Locations: Ankeny, Iowa or Kansas City, Missouri • Full time direct hire opportunity with long term career growth • Join a growing engineering team supporting industrial facility design and construction projects • Opportunity to work on food processing, grain handling, feed manufacturing, seed processing, and industrial manufacturing facilities • Collaborative culture that values teamwork, humility, innovation, and continuous improvement • Comprehensive benefits package including medical, dental, vision, retirement, and paid time off Job Description Our client is growing and looking to add an experienced Industrial Design Engineer who can make an im

Des Moines, IA 50309 • (11 miles) • Full Time • 9/12/2026

Job Title: Sheet Metal Crew MemberStart Date: ImmediatelyJob Type: Full-timeSalary Range: $24.00-$38.00 per hourPosition Overview: This position is responsible for carrying out the day-to-day production needs of the company by ensuring quality workmanship installing architectural cladding systems, sheet metal, metal wall panels, aluminum composite material (ACM) panels, and related specialty systems. Crew Members are expected to be hard-working, team players with a positive attitude and good communication skills.At JR & Co. we're not just building structures - we're building careers. Established in 1986 and proudly veteran-owned, we're an energetic, optimistic, and family-oriented construction company based out of Kansas City known for excellent craftsmanship and top tier customer service.

Indianola, IA 50125 • (26.3 miles) • Full Time • 9/11/2026

Benefits:401(k)Bonus based on performanceCompany carDental insuranceHealth insurancePaid time off This Role Is Perfect For Someone Who: Has handyman, technician, construction, HVAC, plumbing, appliance repair, or mechanical experienceEnjoys structured routines and following a step-by-step processLoves helping people and solving problemsWants a stable schedule that prioritizes family timeHas worked in field service, in-home sales, maintenance, home inspection, or similar rolesThrives in a fast-paced, people-focused environmentWe’re Not a Good Fit If You Prefer to “figure it out as you go”Struggle to follow routines or documentationDislike being coached or measuredWant a job without responsibility or accountabilityQualifications & Skills Experience in technical sales, in-home consultation, h

Ames, IA 50014 • (26.2 miles) • Full Time • 9/11/2026

Description: The CNC Operator is responsible for setting up, operating, and monitoring CNC machines to manufacture precision-machined parts according to specifications, for final assembly. This role requires strong attention to detail, mechanical aptitude, and the ability to read blueprints and technical documents to ensure the highest level of accuracy and quality. The ideal candidate will have experience in machine operation, tool adjustments, and troubleshooting, with a focus on maintaining production efficiency, accuracy and quality. Requirements: Key Responsibilities:Set up and operate CNC machines to produce parts according to technical drawings and work ordersLoad raw materials and adjust machine settings for precise production runsInspect finished products for quality and accuracy

Des Moines, IA 50321 • (11.4 miles) • Full Time • 9/11/2026

Description: Reports ToThe Quality Control Inspector reports to the Quality Control Supervisor.Job SummaryThe Quality Control Inspector will inspect panels and enclosures throughout the production process as they go through the different departments of Electrical Power Products, Inc. These departments include steel, paint, mounting, wiring, enclosures, and shipping.Responsibilities and DutiesImplement quality assurance policies and procedures.Perform routine inspections and quality tests.Inspect products to ensure that they meet quality standards and the customer’s bill of materials.Document deficiencies and errors of products and confirm corrections of these errors.Operate a manual hydraulic pallet jack.Requirements: QualificationsHigh school diploma or equivalent required.College degree

Slater, IA 50244 • (14.1 miles) • Full Time • 9/11/2026

Company Description Syngenta Seeds is one of the world’s largest developers and producers of seed for farmers, commercial growers, retailers and small seed companies. Syngenta seeds improve the quality and yields of crops. High-quality seeds ensure better and more productive crops, which is why farmers invest in them. Advanced seeds help mitigate risks such as disease and drought and allow farmers to grow food using less land, less water and fewer inputs.Syngenta Seeds brings farmers more vigorous, stronger, resistant plants, including innovative hybrid varieties and biotech crops that can thrive even in challenging growing conditions.Syngenta Seeds is headquartered in the United States.We are currently seeking a Lead, HSE Territory for our NA Seeds Production and Supply team supporting si

Bondurant, IA 50035 • (17.6 miles) • Full Time • 9/11/2026

Description: Hulcher Services is seeking a motivated and success-driven Apprentice Operator I. You will play a vital role in transporting, operating and the servicing of assigned heavy equipment used in clearing railroad derailments by lifting and moving derailed railway cars and locomotives.About Us:Hulcher Service is an industry leader with more than 500 employees and over 25 divisions located in the United States and Mexico assisting customers with derailments as well as engineering work, track maintenance, disaster response, and environmental projects.What You'll Do:Drive tractor-trailer or escort vehicles.Material handling of heavy steel chains, blocks and steel cables, and other devices.Climbing and crawling on and under derailed railroad cars.Maintenance, cleaning and setup of equip

Grand Junction, IA 50107 • (33 miles) • Full Time • 9/11/2026

Company Description Louis Dreyfus Company is a leading merchant and processor of agricultural goods. Our activities span the entire value chain from farm to fork, across a broad range of business lines, we leverage our global reach and extensive asset network to serve our customers and consumers around the world. Structured as a matrix organization of six geographical regions and ten platforms, Louis Dreyfus Company is active in over 100 countries and employs approximately 18,000 people globally.Job Description The program provides recent graduates with a well-rounded view of our dynamic business. Over the course of the two-year program, associates will:Gain first-hand experience in every operational position within an industrial facility.Work alongside engineering experts.Learn foundation

Story City, IA 50248 • (36.8 miles) • Full Time • 9/11/2026

Description: At American Packaging Corporation (APC), you’ll find the packaging career you’ve been looking for. With competitive salaries, excellent benefits, 401(k) plans and tuition reimbursement programs, we nurture our employees while advancing and promoting diversity and inclusion. As the leading flexible packaging converter in North America for over a century, APC’s longstanding success is fueled from the inside out. We’re constantly seeking to improve our internal operations and were named a “Best of the Best” in the Best workplaces in the America’s awards for 12 years in a row. It’s how and why we engage the best and brightest talent to continue propelling our shared success into the future.LOCATION: Story City, IASHIFT: 12 hr Days (Pouch 8)SUMMARY: Operate the pouching machine in

Des Moines, IA • (12 miles) • Full Time • 9/10/2026

THIS IS NOT A DATA ENGINEERING RELATED POSITIONCAI seeks Mechanical Commissioning Engineers, Minimum of two years' experience in Data Center Commissioning to support development and execution of all mechanical aspects of commissioning projects. Position Description: This position supports development and execution of all mechanical aspects of assigned commissioning projects from initial engagement, design reviews, checklists, safety support, script development, vendor coordination, testing and report development through turn over to the client. The Mechanical Commissioning Engineer will support the development of the mechanical test schedule, finalize mechanical test procedures, review project submittals for consistency with the design intent, basis of design and the owner’s project requir

West Des Moines, IA 50265 • (9.2 miles) • Full Time • 9/10/2026

Any salary estimation specified in this job board may or may not be aligned with our organization’s pay philosophy. Apply to connect with a Talent Acquisition Partner who can provide you more details!Job Location: Des Moines, IA (relocation assistance will be provided, if needed)Signing Bonus Details:Qualified Tech candidates with 1-5 years of relevant boiler experience will receive a $2500 signing bonus!($1500 paid upon hire, and $1000 paid after 90 days)Qualified Techs with +5 years of relevant boiler experience will receive a $5000 signing bonus!($3000 paid upon hire, $2000 paid after 90 days)Essential functions:Troubleshoot, diagnose, repair, and upgrade industrial boiler controls, sensors, PLCs, field devices, and electrical systems ranging from 12 VDC to 480 VAC.Perform emergency tro

Des Moines, IA 50309 • (11 miles) • Full Time • 9/10/2026

Job TitlePre-Fab Fabricator/TechLocationDes Moines, IAEmployment TypeFull-TimeOverviewEPI Power is seeking a Pre-Fab Fabricator/Tech to support electrical construction activities on mission-critical and data center projects. This role is responsible for field support and contributes to the safe, efficient, and high-quality delivery of complex electrical systems. The ideal candidate is open to travel and/or relocation based on project needs.This role may require extended work schedules, including weekends, based on project demands.EPI Power, LLC is a licensed electrical contractor and subsidiary of The Weitz Company specializing in data center construction. Our mission is to safely deliver industry-leading electrical construction solutions on a fast-track basis. We value our people as our g

Des Moines, IA • (12 miles) • Full Time • 9/10/2026

Stanley Consultants is an award-winning and industry-leading global consulting engineering firm, with an unmatched commitment to culture, values, and ethics. We are dedicated to client experience and solve the most complex challenges to create a sustainable, connected, and enriched world for all. As the world changes, Stanley strategically evolves with it, integrating the latest technology, innovation, and resiliency practices. With over a century of experience serving the energy, federal government, transportation, and water sectors, we have helped improve lives and shape the infrastructure systems that connect us. As an employee-owned organization with a People First approach, we stand apart from other engineering consulting and services firms. At Stanley, your voice counts, your growth

Altoona, IA 50009 • (17.5 miles) • Full Time • 9/10/2026

BLACKRIVER ASSEMBLY LEADSchedule: Monday-Thursday 5am-3:30pm Some Friday's as overtimeSummit Products is seeking a dedicated and experienced Manufacturing Lead to oversee our Assembly operations. This role is essential for ensuring that our products meet the highest quality standards while maintaining efficiency and productivity within our manufacturing team. The ideal candidate will have a strong background in assembly processes, an eye for detail, and the ability to read and interpret blueprints.Key Responsibilities:Lead Assembly Operations:Supervise and mentor a team of assembly workers, providing guidance and support to ensure that all products are assembled accurately and efficiently.Quality Assurance:Implement and monitor quality control measures throughout the assembly process, ensu

Indianola, IA 50125 • (26.3 miles) • Full Time • 9/10/2026

Cemen Tech Inc. the world leader in volumetric concrete technology is entering an exciting new era of growth, innovation, and opportunity. We’re building a workplace where employees are valued like family and rewarded for their hard work. Employee Ownership (ESOP) – As an employee-owner, you share in the company’s success while building long-term financial security and retirement value for you and your family.100% Paid Health Insurance – Keep more of your paycheck with company-paid premiums.Great Benefits & Perks – Paid time off, parental leave, 401(k), bonuses, and more.Strong Team Culture – Work in a supportive, innovative, and team-focused environment.Employee Appreciation – Enjoy company events, holiday meals, service awards and local sporting event tickets.PURPOSE OF POSITIONTo operat

Grimes, IA 50111 • (1.2 miles) • Full Time • 9/10/2026

National Carwash Solutions has grown over the past 45 years to become North America’s largest equipment, service, and cleaning solutions provider in the car wash industry. Our world-class brands are backed by the largest service network in the country with more than 300 dedicated service professionals and growing! Come join us for an extraordinary career in a high growth, team-oriented company!The GigAs anAssembler, you will contribute to the achievement of organizational goals by performing a variety of large part assembly and other small part assemblies. Successful candidates will be self-motivated, demonstrate strong communication skills, and have a solid attendance record.What You’ll DoFollow detailed assembly instructions and blueprint specifications in order to perform a series of op

Des Moines, IA 50309 • (11 miles) • Full Time • 9/10/2026

Bolton & Menk has an exciting opportunity for a Senior CAD Administrator to join our well-established CAD Services team to support our growing Transportation Workgroup. This position will be located preferably out of our Burnsville location; however, our Des Moines, IA, Charlotte, NC and Denver, CO locations would be considered as well.We are seeking a driven and dedicated new team member to join our CAD Services Workgroup to assist with the setup, training, and support for our design staff. Our Transportation Work Group uses Bentley MicroStation and OpenRoads Designer for the plan production process and are looking for candidates who have excellent knowledge with these applications. We also utilize ProjectWise, OpenBridge Designer, the OpenFlows water and wastewater applications, as well

Des Moines, IA 50315 • (12.8 miles) • Full Time • 9/10/2026

Job Summary The Enclosure Foreman will be responsible for overseeing the completion of the projects in the Enclosure Department. This oversight includes ensuring employee safety and productivity while demonstrating strong leadership skills. May travel off-site to conduct services. Responsibilities and Duties Oversee and ensure that all safety rules are followed at all times. Produce work schedules in accordance with the availability of employees, contractors, and labor laws. Recruit, hire, mentor, and train employees and contractors. Develop and oversee quality standards. Resolve conflicts or miscommunication that may happen quickly and amicably. Read drawings and blueprints and convey this information to others. Qualifications High school diploma or equivalent. Additional related training

Des Moines, IA 50317 • (13.4 miles) • Full Time • 9/10/2026

Join Wrench ‘N Go as a Production Worker and assist in the process of prepping vehicles for the auto salvage yard. This is the perfect role for someone with hands-on automotive experience whether from an auto parts store, salvage/recycling yard, automotive service center, or repair shop.Why Join Us:Competitive pay & benefits.Work in a fast-paced automotive environment.Expand your knowledge of car parts, vehicle systems, and recycling operations.Be part of a team that values quality and customer satisfaction.Key ResponsibilitiesA Vehicle Dismantler is responsible for efficiently dismantling cars, including extracting gasoline and all other fluids, removing batteries, mercury switches, non-conformities, catalytic converters, and other items. Decommission cars by utilizing a system of fluid a

Indianola, IA 50125 • (26.3 miles) • Full Time • 9/9/2026

Benefits:401(k)401(k) matchingCompany partiesCompetitive salaryDental insuranceEmployee discountsHealth insuranceOpportunity for advancementPaid time offTraining & developmentBonus based on performanceFree food & snacks The Production Technician Role We’re looking for a Production Technician who takes pride in consistent, accurate repair work and understands the importance of following shop processes. This role is responsible for completing repair and maintenance services efficiently, documenting work properly, and supporting daily shop output. The Production Technician plays a key role in keeping vehicles moving through the shop correctly and on time. Requirements and Responsibilities • Perform repair and maintenance work accurately across a wide range of vehicle systems • Complete digita

Ankeny, IA 50021 • (12 miles) • Full Time • 9/9/2026

Description: In this role you are our first line of defense for monitoring the performance of plastic injection molded machines, to ensure parts are made per quality standards of the customer, on time per the schedule, with lowest cost and the best safety practices possible; and produce quality parts, with zero defects as directed by the part Job Book.ESSENTIAL DUTIES:Responsible for quality of parts produced, with a goal of ZERO Defects.Inspect finished parts per operator instruction sheets and control plans.Trim gates and flash, as required.Pack parts per operator instruction sheets and control plans.Log all necessary information into the traceability logbook.Monitoring material levels in our work cell.Assist Production Quality Lead in training new team members.Responsible for attaching

Grimes, IA 50111 • (1.2 miles) • Full Time • 9/9/2026

PHC Tech / Stump GrinderRange 25.00 hr to 30.00 hrWhy work at Arbor Masters?Arbor Masters is a third-generation, family-owned business, specializing in all areas of tree service and plant care. We love our industry, our work family, and making sure our customers are satisfied by approaching our work with high-level standards for safety and excellence. We are putting down new roots and expanding the family business. We are currently looking to add a Plant Health Care Technician (PHC Tech) to our team of experts. As a PHC Tech, you will have the unique opportunity to communicate with customers and discuss their PHC needs, as well as selling and applying the needed products.Your future at Arbor Masters:When you join the Arbor Masters team, you are joining our work family. We want to see our w

Ankeny, IA 50021 • (12 miles) • Full Time • 9/9/2026

Mold Builder / Mold MakerLocation: Ankeny, IAPay: $25–$30/hour + Shift Differential + Quarterly Profit SharingAvailable Shifts2nd Shift: 2:00 PM–10:30 PM (+10%)3rd Shift: 10:00 PM–6:30 AM (+15%)Weekend Shifts: (+20%)About the OpportunityWe are seeking skilled Mold Builders, Mold Makers, Tool & Die Makers, and Precision Machinists to join a growing Tool Room team supporting the production of highly engineered micro-sized components used in life-saving medical devices, aerospace applications, and advanced technologies.This is not a production machining role. You will build brand-new precision steel molds from start to finish while working with some of the most advanced tooling and machining equipment in the industry.Projects involve extremely tight tolerances often measured in microns requir

Des Moines, IA 50315 • (12.8 miles) • Full Time • 9/9/2026

Celebrating our 82nd year, Martin Engineering is a privately owned global manufacturing company in Neponset, IL.As the leader in our industry, we believe our people are responsible for ourSUCCESS. Our culture is unique; we want our employees to arrive at work happy and leave feeling that same way for the day. We are united; we know we are better together. We strive to deliver superior service to all our internal and external customers. If you share our values, please continue reading to find out what we are looking for in a Martin Service Technician.TheService Technicianis responsible for delivering, installing, servicing, and maintaining Martin wear components and products on assigned service routes.The Service Technician will work closely with sales staffto identifysales opportunities wi