Tampa, FL • (25.3 miles) • Full Time • 9/19/2026

Job Overview The Quality Control Inspector 2 is responsible for assisting with ensuring the integrity, safety, and compliance of unmanned aerial systems (UAS) and sub-systems. Operating within a dynamic production environment, this role focuses on assisting with functional testing and system validation using Mission Planning Software (MPS) and ground control station (GCS) tools. The inspector will perform hands-on quality inspections of UAS platforms and subsystems to verify system integration, configuration accuracy, and mission-readiness in accordance with AS9100 and ISO 9001 quality standards.Essential Functions Conduct visual, dimensional, and functional inspections of components, subassemblies, and assemblies, including composite and additively manufactured parts, using approved inspe

Largo, FL 33773 • (5.5 miles) • Full Time • 9/19/2026

Grow, learn, and evolve with us! Kelly® is hiring Assemblers at a top manufacturing client in Largo, FL.Schedule & Pay:Mon-Fril 1st shift - 7AM-3:30PM l $17.00/hr.Mon-Fri l 2nd shift -3:24PM-11:54PM l $18.70/hr.Why apply?Temp to hire opportunityBuild valuable assembly skillsGrowth & cross-training opportunitiesWhat you’ll do:Assemble mechanical, pneumatic, electronic, and optical productsPerform solderingInspect and test assemblies for qualityOperate various assembly/test equipmentMaintain safety and clean work areaCommunicate shift statusRequirements:6+ months’ assembly experienceJ-STD soldering certification preferredAble to read blueprints and follow instructionsBasic computer skillsStand for up to 8 hours, lift up to 35 lbsVisual acuity 20/40 in each eyeHigh school diploma or equivalen

Sarasota, FL 34234 • (40.4 miles) • Full Time • 9/18/2026

Benefits:Competitive salaryDental insuranceEmployee discountsHealth insurancePaid time offTraining & developmentVision insuranceWellness resourcesJob Title: Marine Assembly Technician - Plumbing & Electrical (Boat Manufacturing) Company: Barker Boatworks Location: Sarasota, FL About Barker Boatworks: Barker Boatworks is a manufacturer of high-performance, custom-built center console boats. We are committed to exceptional quality and craftsmanship. We are seeking a Marine Assembly Technician to install the plumbing and electrical systems that go into our hulls before the deck and liner are bonded. Job Summary: This role installs rough plumbing and electrical systems in open hulls and liners prior to bonding. Because these systems become permanently inaccessible once the boat is closed up, t

Tampa, FL 33634 • (19.8 miles) • Full Time • 9/17/2026

Description: TRAK TECOM designs and builds advanced RF, microwave, and antenna solutions for mission-critical aerospace, defense, space, and satellite applications. From Radar and Telemetry to Datalinks and Communications, our products deliver the reliable technology needed to stay connected, protect critical missions, strengthen our military, and help defend freedom around the globe.Why This Opportunity?Play an important role in bringing products from concept to reality by supporting the development, documentation, and integration of high-reliability printed circuit boards used in RF, microwave, antenna, aerospace, defense, space, and satellite applications.A PCB design and layout position focused on component placement, PCB routing, schematic-to-layout implementation, controlled-impedanc

Plant City, FL • (45 miles) • Full Time • 9/17/2026

Diversified Sourcing Solutions are seeking reliable Assemblers to build components according to specifications while maintaining quality and safety standards. Responsibilities Assemble parts following instructions and technical drawingsUse Power and Hand ToolsUse nuts, bolts, and related fasteners.Inspect finished components for quality and accuracyReport defects or issues during assemblyMaintain a clean, organized work areaWork safely and follow all company guidelines Requirements High school diploma or equivalentAssembly or manufacturing experience preferredAbility to read technical drawings/blueprintsStrong attention to detail and manual dexterityAble to lift up to 75 lbsComfortable working in a hot environmentMust wear steel-toe boots\nCompany DescriptionConnecting Companies with Good

Clearwater, FL • (7.6 miles) • Full Time • 9/17/2026

CNC / Yang Operator – 2nd Location: Clearwater, FL Shifts: 2nd Training: First Shift, 7:00 AM – 3:00 PM Are you mechanically inclined, eager to learn, and looking for an opportunity to build a career in machining? We are seeking a CNC/Yang Operator to join our growing manufacturing team. This is a great opportunity for someone with a strong attitude, mechanical aptitude, and a desire to advance into a Machine Setup role. Schedule Training: 7:00 AM – 3:00 PM2nd Shift: 3:15 PM – 11:45 PMMust be available to work 1st or 2nd shift during training. What You'll Do Learn to operate 3-axis machining equipment.Progress toward training on Takamaz equipment.Produce quality parts according to specifications and established processes.Follow work instructions, procedures, and safety requirements.Inspec

Bradenton, FL 34211 • (42.1 miles) • Full Time • 9/16/2026

We are seeking a highly skilled and experienced Machine Builder Technician to join our growing team. This role is responsible for the hands-on assembly, integration, and testing of complex custom automation machinery. The ideal candidate has a strong mechanical aptitude, attention to detail, and thrives in a fast-paced, collaborative environment.Key ResponsibilitiesAssemble complex automated machinery, systems, and sub-assemblies from mechanical drawings, blueprints, and schematicsInstall pneumatic, hydraulic, and basic electrical componentsCollaborate with engineering, controls, and manufacturing teams to ensure equipment functions per specificationsPerform mechanical troubleshooting, alignment, and precision adjustment of moving componentsAssist in testing, debugging, and system startup

Clearwater, FL 33756 • (4.6 miles) • Full Time • 9/15/2026

Position SummaryQuality Manager with extensive leadership experience in ISO 9001 and AS9100 compliant Quality Management Systems (QMS) within electronics manufacturing environments. Proven expertise in building and managing high-performing quality teams, driving compliance with customer and regulatory requirements, and delivering operational excellence. Demonstrated success in audit management, root cause corrective actions, continuous improvement initiatives, and cross-functional collaboration to ensure superior product quality, on-time delivery, and exceptional customer satisfaction.Duties and ResponsibilitiesOversee the development, implementation, and continuous improvement of the QMS to maintain full compliance with ISO 9001, AS9100, and other applicable standards.Provide quality over

Clearwater, FL 33762 • (10.1 miles) • Full Time • 9/15/2026

Full-time Controls TechnicianTop Leading Manufacturing CompanyAbout Us Our company is a global leader in manufacturing, known for innovation, quality, and cutting-edge technology. We are seeking a talented and experienced Controls Engineer to join our dynamic team and help drive our automation initiatives forward.Job Overview We are looking for a skilled Controls Technician to help design, implement, and maintain control systems for our state-of-the-art manufacturing processes. The ideal candidate will have extensive experience with Allen Bradley systems, HMI (Human-Machine Interface), and SCADA (Supervisory Control and Data Acquisition) systems. This role is critical in ensuring the efficiency, reliability, and safety of our automated production lines.Key Responsibilities Help Design, dev

Oldsmar, FL 34677 • (15 miles) • Full Time • 9/15/2026

Description: We are seeking an experiencedDriver/Sheet Metal Deck Installer/Ironworkerto join our team. This role involves the safe installation of sheet metal decking on steel framing and performing shear stud installation. The ideal candidate is reliable, safety-conscious, and comfortable working at heights and in varied weather conditions.Benefits:Per Diem, Health insurance, Dental, Vision, 401K Match (6%), Holiday & Vacation payKey Responsibilities:Lay and attach metal decking on steel structuresOperate hand, power, pneumatic, and powder-actuated tools safely and effectivelyMaintain tools and equipment in proper working conditionAccurately report time and attendance using technologyComply with OSHA, customer, and company safety standardsPerform additional duties as assignedPreferred Ce

Tampa, FL 33612 • (26.3 miles) • Full Time • 9/15/2026

Plumbing Estimator – Lead Commercial and Industrial Preconstruction ExcellenceCompany: Feddon Mechanical LLC.Salary/Pay Rate: $85,000 - $110,000 per year (plus Year-End Bonus).Location: Onsite (Pinellas Park, FL.).Job/Employment Type: Full Time.Schedule: Monday – Friday.Project Scope: Plumbing (Commercial, Industrial, Government or Federal)Mandatory Licenses & Certifications: None Required.The OpportunityYou will serve as a cornerstone of the preconstruction team, directly influencing the company’s growth by securing complex commercial and industrial projects. This role offers the autonomy to manage the full bid lifecycle while being backed by a leadership team that genuinely cares for its people. You will join a culture where accountability is a point of pride and where your technical pre

Tampa, FL 33619 • (28.6 miles) • Full Time • 9/15/2026

Job Summary:The role of this position is to create programs for the CNC Plasma and Flame-cutting machines utilizing part nesting software. The CNC Programmer position will grow and change as the department does.Essential Functions:Support all TTI/FSS Company Safety Policies to ensure they are followed, and personnel and property are kept safeRead technical drawings and guide in the set-up of machines in accordance with these blueprintsUse computer software to model cutting paths and program machines accordinglyProgram and oversee quality assurance tests to ensure products meet design specificationsAdjust machine cutting paths or settings to optimize production while maintaining qualityConsider tools required to cut materials and program machines accordinglyTroubleshoot and resolve problems

Clearwater, FL • (7.6 miles) • Full Time • 9/8/2026

The RoleProduction depends on equipment that works. As a Manufacturing Maintenance Tech, you keep our facility running smoothly by diagnosing equipment issues, performing repairs and preventive maintenance, troubleshooting mechanical and electrical problems, and working collaboratively with Production to minimize downtime and maximize uptime. You are the hands-on technical expert who understands how equipment functions and how to fix it when it doesn't.This role combines hands-on mechanical and electrical troubleshooting, preventive maintenance execution, equipment documentation, and proactive communication with the Maintenance Supervisor and Production teams. You'll respond to breakdowns, perform scheduled maintenance on production equipment, maintain equipment records and service logs, a

Tampa, FL 33619 • (28.6 miles) • Full Time • 9/6/2026

Description: Princeton Precision Group: Always Advancing. Each business unit under the PPG portfolio has been deliberately selected for their ability to support their customers, lead their industry, and provide high quality products. Your journey with us is more than just a job. It is an opportunity to support the manufacturing of critical hardware to key defense programs, supporting missions to space and providing access for global travel. Join us in the journey!We are actively seeking a dedicated Process Engineer to join and grow in the PPG organization. This role plays a critical part in ensuring consistent, repeatable, and compliant manufacturing processes across the organization, directly contributing to product quality, on-time delivery, and overall operational excellence. The Proces

Clearwater, FL 33760 • (8 miles) • Full Time • 9/5/2026

Description: SUMMARY Manage and improve all processes with the WHK medical device manufacturing department. Work with Quality to ensure all systems are in compliance with ISO 13485. Implement new processes and assist with onboarding of all new business. Set-up and manage all BOM’s and Routings in ERP system for new part introduction and for any process changes. Promote safety, housekeeping, and area improvement initiatives. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.Candidate should possess previous experience in medical device manufacturing. Work with Quality to ensure that all processes are in compliance with ISO 13485 requirements. Write IQ/OQ/PQ validation protocols, execute validation protocols for new equipment and process changes, and w

Tampa, FL 33607 • (20.7 miles) • Full Time • 9/4/2026

Instrumentation & Controls (I&C) Commissioning Coordinator Location: Naples, Florida and/or Jupiter, FLJoin a growing team helping modernize Florida’s critical infrastructure.Powerserve Technologies is seeking an Instrumentation & Controls (I&C) Commissioning Coordinator to support a major electrical infrastructure upgrade at TWO large water treatment facilities in either of two locations: Naples, Florida and Jupiter, FL. This position will initially be based full-time in Naples and/or Jupiter for approximately 12-24 months - we have a need for someone in both/either locations. Upon successful completion of the project, the selected candidate will transition to supporting future industrial and infrastructure projects throughout other areas of Florida as well.We are looking for an organize

Tampa, FL 33602 • (24 miles) • Full Time • 9/4/2026

Hazen and Sawyer is seeking a CAD/BIM Designer to join Hazen’s HVAC/Plumbing group. The candidate will work with project lead engineers to produce BIM (Revit) models, families, and contract drawings for the HVAC/Plumbing discipline. The ideal candidate is a team player and self-starter with exceptional organizational skills and has the ability to work independently, as well as in a team environment. The candidate must be detail oriented and have good communication and interpersonal skills. Why Hazen and Sawyer:Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water."Our work includes planning, design, and oversight of construction of environmental infrastructure – for water, wastewater

Tampa, FL • (25.3 miles) • Full Time • 9/3/2026

2nd Shift - 20% Pay PremiumWeekend day Shift - 20% Pay PremiumWeekend 2nd Shift - 40% Pay PremiumSets up and operates various CNC machines and manual equipment. Inspect parts and document quality results.· Independently setup complex jobs on 3 to 5 axis CNC Machines· Operate 3 to 5 axis CNC Machines· Ensure the necessary quality throughout the production run by inspecting and documenting the quality results· Ensure cycle times are adhered to· Prove out, de-bug and give feedback on CNC programs· Document how jobs are setup, run and inspected as thoroughly as possible· Setup and operate secondary operations when cycle time of your primary machine allows· Setup and operate manual equipment as necessary· Monitor the work of operators assigned to you· Provide on-the-job training· Perform routin

Tampa, FL • (25.3 miles) • Full Time • 9/3/2026

Watch your work come to life in landmark projects around the world when you partner with Syska Hennessy Group. As a global leader in consulting, engineering, and commissioning services, we specialize in MEP, information and communication technology, architectural lighting, vertical transportation, and commissioning.We are seeking an experienced Senior - Supervising Engineer Ito join our growing team in Tampa, FLOur team is looking for a candidate with significant mechanical design experience. This candidate should also have the desire to help grow our team, and to manage and develop our young mechanical engineers.Our dynamic work environment provides the optimal setting to take your engineering career to the next level. From our supportive culture, diverse workforce, and competitive compen

Tampa, FL 33626 • (18.1 miles) • Full Time • 9/2/2026

Description: Quality Specialist - Build the systems that keep our plants safe, compliant, and built to lastSeven Seas Water Group is looking for a Quality Specialist to build and run the quality and safety systems behind our water and wastewater operations. You'll work across engineering, construction, project management, and operations, standing up the processes and documentation that keep every plant audit-ready and every job site safe. This role is based out of our Tampa office.Who we areSeven Seas Water Group (SSWG) delivers more than 20 billion gallons of water a year to industrial, governmental, municipal, and hospitality customers across the U.S., Caribbean, and Latin America. Through our Water-as-a-Service® (WaaS®) model, we design, build, own, and operate more than 200 water and w

Tampa, FL 33602 • (24 miles) • Full Time • 9/2/2026

**This Position is onsite located in Lakeland, FL**The Mechanical Assembler is responsible for assembling mechanical components, subassemblies, and finished products according to engineering drawings, work instructions, and quality standards. This role supports production by ensuring accurate, efficient, and safe assembly of parts used in custom metal fabrication projects.Key ResponsibilitiesAssembly & Production Assemble mechanical components, hardware, and fabricated parts according to blueprints and specificationsUse hand tools, power tools, and measuring equipment to complete assembliesFit, align, and adjust parts to meet dimensional and functional requirementsPerform basic mechanical troubleshooting and rework as neededBlueprints, Documentation & Quality Read and interpret mechanical

Tampa, FL 33619 • (28.6 miles) • Full Time • 9/1/2026

Description:Position Details Job Title: Production TechDepartment: OperationsReports to: Production SupervisorFLSA Status: Full-Time, Non-ExemptWork Location: 9010 Palm Road | Tampa, Florida 33619Our mission is to share a sense of adventure with the world through our high performance marine products while instilling and inspiring consumer confidence with superior service.Benefits 100% employer paid - Employee/family health plan option availableHealth Savings Account (HSA) – with generous employer matching programDental, Vision, Voluntary Life Insurance100% employer paid – Employee Life Insurance, Short Term and Long-Term Disability InsuranceAccident, Hospital and Critical Illness401K with generous employer matching programPaid time offHoliday payAnnual employee apparel spending allowanceEm

Clearwater, FL • (7.6 miles) • Full Time • 8/30/2026

CAMDriveMulti-SpindleScrewMachineOperator Automation Personnel Services isseekingCAM DriveScrew MachineOperatorsfor a company based in Clearwater, FL. In this role, you will primarily be responsible for operating CNC Machines such asmulti-spindlescrew machines,CAM-Driven machines, engine lathes,manual lathes,Euroturnand Davenport. Pay Rate: $21.00- $26.00per hour,depending on experience. Schedule and Hours: 1st, 2nd, and 3rd shift; will train on 1st shiftfrom 7:00 AM to 3:30 PM. Monday to Friday - overtime is mandatory. 1st shift: 7:00 am – 3:30 pm2nd shift: 3:15 pm – 11:45 pmCAM DriveMulti-SpindleScrewMachineOperatorDuties and Responsibilities:OperateEuroturnand Davenport multi-spindle screw machinesand ensure parts meet quality standards.Read and interpret schematics, blueprints, microme

Saint Petersburg, FL 33716 • (11.9 miles) • Full Time • 8/30/2026

Description: SUMMARY:Facilitates, sets up, builds, calibrates, tests, and breakdown of plasma processing equipment and records results.DUTIES AND RESPONSIBILITIES:NOTE: The Manufacturing Technician II performs all duties of Manufacturing Technician I, and performs the following duties on the full range of products and equipment including prototype systems, as distinguished from Manufacturing Technician I, which performs duties on a limited range of plasma-processing equipment and products. Work is performed with little or no direct supervision.Facilitates equipment applying water, electrical power and leveling machinery in temporary installationPositions and assembles complex electro/mechanical parts and assemblies part according to blueprints, schematics and/or standard procedures using h

Tampa, FL 33605 • (25.6 miles) • Full Time • 8/30/2026

Innovative Chemical Products Group (ICP Group) is a leading formulator and manufacturer of specialty coatings, adhesives, and sealants serving the construction and industrial end markets. ICP Group is comprised of market leading brands known for innovation, quality, and performance. Founded in 2015 and supported by a lean corporate team, ICP Group has scaled rapidly through organic and acquisition growth into one of the largest coatings, adhesives, and sealants companies in North America. ICP Group is headquartered in Andover, MA and has manufacturing and distribution sites throughout North America, Latin America, UK, Europe and the Asia Pacific region.ICP is seeking a Maintenance Manager for our Tampa, FL plant. Under the direction of the Plant Manager, you will coordinate all mechanical

Tampa, FL 33605 • (25.6 miles) • Full Time • 9/3/2026

OverviewThe Electrical Engineer is responsible for leading the design, coordination, and execution of electrical engineering projects from concept through construction. This role plays a key part in delivering high-quality electrical systems while ensuring compliance with project requirements, industry standards, and client expectations.SummaryWe are seeking a licensed Professional Engineer (PE) with experience in commercial electrical system design and project leadership. The ideal candidate will combine strong technical expertise with the ability to manage project teams, coordinate with clients and stakeholders, and support projects throughout the design and construction lifecycle.ResponsibilitiesLead the design and delivery of assigned electrical engineering projects.Manage Engineers, D

Clearwater, FL • (7.6 miles) • Full Time • 9/26/2026

Test Technician (Entry-Level) – Clearwater, FLPay: $21–$23/hour | Schedule: Day Shift | Temp-to-Hire We're looking for a Test Technician to join an electronics manufacturing team in Clearwater, FL. This is a great entry-level opportunity for someone with an electronics or electrical background who wants to build a career in testing, troubleshooting, and industrial manufacturing. Responsibilities Perform functional testing on electronic assemblies and motor control products. Use test equipment such as multimeters and oscilloscopes. Read electrical schematics and wiring diagrams. Troubleshoot and perform basic component-level repairs. Complete test documentation and maintain quality standards. Work with Production, Quality, and Engineering teams while following OSHA and safety procedures. Qu

Spring Hill, FL 34610 • (39.7 miles) • Full Time • 9/25/2026

Position Summary DescriptionTo provide complex instrumentation and control (I&C) and electrical engineering technician services to assist in attaining the goals of plant reliability, efficiency, safety and environmental compliance in the most cost-effective manner.Essential FunctionsDetailed planning of equipment or process evaluation, testing and monitoring programs up to three years into the future.Reviews proposed design modification developed by peer group within the department to ensure the completeness and applicability of the design.Conducts or leads others in design studies for Instrumentation and Controls process systems or equipment.Prepares or leads others in the development of technical specifications, pricing documents, bidder’s lists, bid evaluation criteria and project cost

Saint Petersburg, FL 33716 • (11.9 miles) • Full Time • 9/24/2026

Description: Join our skilled maintenance team and help keep a highly automated commercial printing and mail production facility operating at peak performance.At the Valpak Clipp Manufacturing Center, our Industrial Maintenance Technicians play a critical role in supporting the equipment that produces millions of printed advertising pieces delivered to homes across the country.This is a hands-on maintenance position in a clean, climate-controlled manufacturing facility where you'll troubleshoot, repair, and perform preventative maintenance on automated production equipment using your mechanical and electrical skills.If you enjoy diagnosing problems, minimizing downtime, and working with modern industrial equipment, we'd love to hear from you.Why You'll Love Working Here•Clean, climate-cont

Tampa, FL • (25.3 miles) • Full Time • 9/22/2026

What happens when a mechanical contractor is about more than just HVAC and controls?Where it’s not just about satisfying clients, but transforming an industry.With Tudi Mechanical Systems, you get a team that operatesAs a single heartbeat. Because a business doesn’t always have to BE a business.It should be something more.Experience the Tudi difference, where anything is possible.We are excited to announce openings as aControls Technicianin our Controls Division .Responsibilities:Installation of control wiring, controllers, sensors, and software.Ensures high levels of customer satisfaction.Manages assigned work to meet professional execution, of time and customer satisfaction in an ethical matter.Provides training to customers on electronic control systems operations.Diagnoses and repairs

Gibsonton, FL 33534 • (29.1 miles) • Full Time • 9/22/2026

Job Description – NQA-1 Quality Control InspectorPosition Summary The NQA-1 Quality Control Inspector is responsible for performing inspection, documentation, and quality verification activities for complex steel fabrication work performed under AISC, AWS, project-specific, and nuclear quality assurance requirements. This position supports fabrication, welding, dimensional inspection, material verification, nondestructive examination coordination, and quality documentation in accordance with company procedures, approved drawings, specifications, and applicable codes. This position requires strong technical inspection capability, disciplined documentation practices, and the ability to work in a highly controlled quality environment. The role requires, at minimum, AWS Certified Welding Inspe

Clearwater, FL 33765 • (8.2 miles) • Full Time • 9/22/2026

Position Overview We are looking for a dependable and detail-oriented Swiss CNC Machine Operator to join our precision manufacturing team. This position operates Star Swiss-type CNC machines to produce high-quality, precision components according to blueprint specifications.The right candidate has experience using precision measuring tools, can read and understand blueprints, and takes pride in producing quality parts consistently. We are also open to strong "walk-on" candidates who have the right aptitude, attitude, mechanical ability, and willingness to learn.English language skills are not required. Translators are available on the plant floor for multiple languages, including Spanish and Vietnamese. Training & Schedule Training: 1st Shift 7:00 AM–3:30 PMAssigned Shift After Training: 2

Tampa, FL • (25.3 miles) • Full Time • 9/21/2026

Who is Prince?Founded in 1959 by Ed Miller near Chicago, Prince Industries has grown from a one-man shop into a global manufacturing partner. With seven facilities across the U.S. and China, we serve industries from hydraulics to aerospace, handling everything from just-in-time components to high-volume assemblies.At Prince, we don’t just make partswe solve complex supply chain challenges. We are a strategic partner, focused on helping clients improve products, reduce costs, and simplify operations. Certified to ISO 9001:2015, ISO 13485, and AS9100 standards, we combine quality, innovation, and growth-minded thinking to deliver real value.Job SummaryManufacturing Precision Metal Products on CNC Turning Centers. Qualified to operate Twin Spindle / Twin Turret machines manufactured by Eurote

Clearwater, FL 33762 • (10.1 miles) • Full Time • 9/20/2026

Description: Shift5:00 AM to 5:30 PMSUMMARYSet up and operate machine tools such as pressing, planning, sawing, grinding, and weigh material, to machine nonmetallic work pieces by performing the following duties.ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned.Read and follow Job order for product specifications such as dimensions, tolerances, and pounds, machining instruction such as feed rate, cutting speeds, closing speeds and determine sequence of operations.Document and keep logs, routings and various forms updated.Fill bags with resin to required weight and stage at the proper location. Scrap, clean, spray mold release, fill, and level the press.Sort and test material to ensure it is UHMW-PE prior to grinding, milling and putting in stock. Loa

Bradenton, FL • (32.6 miles) • Full Time • 9/18/2026

Manufacturing Assembler – $19.00/Hour Location: Bradenton, FLPay: $19.00 per hourSchedule: Monday–Friday, 7:30 AM–4:00 PMEmployment Type: Full-TimeIndustry: Manufacturing / Production / HVAC AssemblyManufacturing Assembler Job Summary Ad-VANCE Talent Solutions is hiring an experienced Manufacturing Assembler for a full-time manufacturing opportunity in Bradenton, FL.We are looking for a dependable, mechanically inclined assembler with previous hands-on assembly or manufacturing experience. The Manufacturing Assembler will use hand tools, power tools, and measuring devices to assemble ventilation and HVAC-related products while maintaining high standards for quality, accuracy, and production speed.This is a hands-on position working with an established production team that values teamwork,

Sarasota, FL 34234 • (40.4 miles) • Full Time • 9/17/2026

Job Title: Gelcoat Finisher / BufferCompany: Barker BoatworksLocation: Sarasota, FLAbout Barker Boatworks: Barker Boatworks is a leading manufacturer of high-performance, custom-built center console boats. We are committed to delivering exceptional quality and craftsmanship to our customers. We are seeking a Gelcoat Finisher to bring our laminated hulls, decks, liners, and components to a show-quality finish.Job Summary: The Gelcoat Finisher takes cured, de-molded fiberglass parts and finishes them to final cosmetic standard repairing surface defects, sanding through progressive grits, and cutting and buffing to a deep, uniform gloss.Responsibilities:Inspection and Repair:Inspect de-molded parts under proper lighting for porosity, pinholes, voids, print-through, blisters, and color variati

Tampa, FL 33602 • (24 miles) • Full Time • 9/16/2026

The ideal candidate will have a strong background in programming CNC Lathes and Mills as well as knowledge of troubleshooting. This position requires the ability to program using SolidWorks, CAD and CAMWorks. The ideal candidate must be able to interpret blueprints, schematics, and technical drawings, as well as an understanding of the principles of precision measurement and quality control. The successful candidate will be able to work independently and as part of a team in a fast-paced environment.WHAT WILL YOU DO:Program using SolidWorks, CAD, and CAMWorks.Set up and select tooling per the program and the machine.Perform regular maintenance and troubleshooting on CNC Lathes and Mills.Perform quality checks on parts produced by CNC Lathes and Mills.Read and interpret blueprints, schemati

Clearwater, FL • (7.6 miles) • Full Time • 9/15/2026

Davenport Operator Location: Clearwater, FL Schedule: Training: Monday–Friday, 7:00 AM – 3:00 PM (1st Shift)Permanent Shift: Monday–Friday, 3:15 PM – 11:45 PM (2nd Shift) Looking for a career in precision manufacturing? We are seeking a motivated Davenport Operator to join our growing team! This is an excellent opportunity to build a long-term career with a stable, well-established manufacturer that values teamwork, quality, and employee development. What You'll Do: Learn to set up and operate Davenport multi-spindle screw machinesMonitor machine performance and make adjustments as neededPerform quality inspections using measuring tools and gaugesLoad raw materials and maintain proper machine operationTroubleshoot minor machine issues and notify supervisors of larger concernsRead and follo

Tampa, FL • (25.3 miles) • Full Time • 9/15/2026

Work Arrangement This is an onsite position.Job Overview The Electrical Engineer 3 position plays a crucial role in designing, developing, and maintaining electrical systems, components, and leading larger projects. As a more experienced contributor, ownership of larger tasks and leadership of team members will be expected. This key player will combine technical expertise, mentorship, and problem-solving skills to design, implement, and maintain electrical systems such as vehicle avionics, battery and power subsystems, radio communication systems, navigation, and computer vision systems, etc. as well as design PCB's and review PCB's from schematic. This role will provide direct support for new product introduction and integration as well as onsite technical support for production operation

Riverview, FL 33578 • (30.4 miles) • Full Time • 9/15/2026

Description: Join Our Team – Production Tech / Assembly TechLocation: Tampa, FLDepartment: Trolling Motor Assembly ? Position Type: Full-Time, Non-ExemptPower Your Career with Power-Pole!Are you mechanically inclined, detail-oriented, and looking for a hands-on career in a fast-paced, team-driven environment? Join Power-Pole, a leader in high-performance marine technology, as a Production Tech / Assembly Tech and be part of something that movesliterally!In this role, you’ll help build, test, and package some of the most advanced trolling motors and accessories in the industry. Whether you love working with your hands, solving mechanical challenges, or taking pride in craftsmanship and precision, this opportunity is perfect for you!What You'll Do:? Assemble high-quality trolling motors – fr

Clearwater, FL 33759 • (9.9 miles) • Full Time • 9/9/2026

Production AssociateLocation:Clearwater, FLReady, set, go! Put your career in motion with a new opportunity in Clearwater, FL. Join the Kelly® Professional & Industrial team as a Production Associatewith one of the world's leading medical manufacturing companies.Position Details:Temp to Hire OpportunityShifts Available:Night Shift:12-hour (2-2-3 rotating schedule), 6:45pm–6:45am $16.50/hr (Monday–Friday)$18.00/hr (Saturday or Sunday)Day Shift:12-hour (2-2-3 rotating schedule), 6:45am–6:45pm $15.00/hr (Monday–Friday)$16.50/hr (Saturday or Sunday)Key Responsibilities:Manufacture intraocular lenses according to standard instructionsPerform molding, shaping, polishing, inspections, and packagingEnsure all products meet quality guidelinesFollow FDA and company safety regulations at all timesMai