Huntsville, AL 35805 • (12.1 miles) • Full Time • 10/15/2026

FMS Aerospace is currently seeking an experienced full-time Mid to Senior Level Test Instrumentation Engineer for our Huntsville office location. This position will support the design, development, integration, and implementation of data acquisition systems, instrumentation, and associated sensors. The successful candidate will be responsible for collaborating with various engineering disciplines to define each program’s instrumentation requirements, as well as develop/modify/maintain data acquisition system hardware and software, support instrumentation planning, installation, and required calibrations. Job Responsibilities Be responsible for specification, selection, design, integration, operation and maintenance of aircraft data acquisition systems, and their related components Collabor

Huntsville, AL 35805 • (12.1 miles) • Full Time • $61,110 to $91,665 / yr • 10/15/2026

USRA and the Science and Technology Institute are seeking a full-time Mechanical Engineer to work in our Huntsville, AL office. The Mechanical Engineer will design, fabricate, assemble, and test machines and instruments that will be used for X-ray optics fabrication, calibration, and metrology. The successful candidate will collaborate closely with NASA Marshall Space Flight Center’s (MSFC) X-ray Astronomy Group to perform this work. This work directly supports the development of next generation X-ray optics for future NASA missions. Specific Responsibilities: Machine Design and Fabrication: Support development of machines and instruments that will be used to fabricate, measure and calibrate X-ray optics. Support development of fixtures and other hardware used for the fabrication and testi

Huntsville, AL 35806 • (16.6 miles) • Full Time • 10/15/2026

nou Systems, Inc. (nSI) is now officially a 100% ESOP company! We value teamwork and collaboration, and this transition allows us to take that commitment to a new level. nSI empowers our customers by supplying products, services, and expertise with powerful, data driven insights that transform defense systems and improve capabilities. nou Systems, Inc. (nSI) is building systems that solve our nation's most challenging defense problems in an enjoyable, stimulating environment. We’re known for fielding revolutionary missile defense systems, pioneering step changes in RF seeker technology, introducing principled AI systems, and rapidly pioneering novel defense platforms, from space to the seabed. We're looking for talented builders with high levels of curiosity and extremely strong grounding

Huntsville, AL 35811 • (19.2 miles) • Full Time • $25.00 to $28.00 / hr • 10/15/2026

CNC Press Brake Setup Technician At CloudRay, precision isn’t a buzzwordit’s how we build. Step into a hands-on role where your setup expertise and keen eye for detail shape every bend, angle, and finish. A day in the life You clock in on first shift, review the day’s work orders, and pull the right punches and dies. You load and tweak CNC programs, dial in offsets, and run a first-piece inspection with calipers and micrometers before releasing the job to production. Throughout the day, you read engineering drawings and tolerances, verify quality in-process, document results, and keep safety at the forefront while troubleshooting any anomalies in material, tooling, or code. What you’ll do Set up and operate CNC press brake equipment to meet spec and schedule. Interpret drawings, work order

Decatur, AL 35601 • (23.5 miles) • Full Time • 10/15/2026

Job Title: Quality Engineer FLSA Status: Exempt Position Overview: The Quality Engineer is responsible for applying engineering principles and quality methodologies to improve product quality, manufacturing processes, and overall operational performance. This position serves as a technical resource to the Quality, Engineering, Production, and other departments by investigating quality issues, identifying root causes, developing sustainable corrective actions, and implementing process improvements. The Quality Engineer will focus on preventing defects, reducing process variation, solving recurring quality problems, and improving manufacturing processes rather than solely identifying defects after they occur. This position requires a strong understanding of manufacturing processes, engineeri

Huntsville, AL 35824 • (11.3 miles) • Full Time • 10/14/2026

Manufacturing Engineer III Location: Huntsville, Alabama A-Shift (5:00AM to 3:30PM) Monday to Friday Compensation: starting at $72 per hour Contract / On-site Position Overview As a Manufacturing Engineer, you will translate engineering intent, drawings, and configurations into operational steps and processes to produce fully functional hardware at scale. Responsibilities include supporting builds, translating engineering definitions into manufacturing work instructions, and developing/qualifying new technology. Successful candidates will lead DFMA studies to strengthen the feedback loop between design, build, and test, accelerating product development. Responsibilities include: Define manufacturing processes and requirements to prepare hardware for test, qualification, and flight operatio

Huntsville, AL • (11.6 miles) • Full Time • 10/14/2026

We are partnering with a rapidly growing precision manufacturer serving the aerospace, defense, medical device, and other high-precision industries to hire Quality Inspectors . This role is responsible for inspecting complex precision-machined components throughout the manufacturing process to ensure they meet engineering specifications and customer quality standards. You'll work closely with machining, engineering, and quality teams in a fast-paced, high-mix manufacturing environment. Shifts: Hiring 1st and 2nd shift Compensation: $28–40/hr (depending on experience) What You'll Be Working With: Wenzel CMM Systems Keyence Laser Inspection Technology Precision hand inspection equipment Hermle, Heller, Zayer, and DN Solutions machining centers Siemens Sinumerik & Heidenhain controls Responsi

Madison, AL 35758 • (14.8 miles) • Full Time • 10/14/2026

GIG South / Generation Industrial & Government This position is not eligible for recruiting or sourcing by outside parties. Disclaimer : Be cautious and only respond to emails from our “mesainc.com” domain. We will never ask for sensitive information, such as bank account details, SSN, etc., via email. If you receive any communication asking for such information, it is not from Mesa. For any concerns, or to verify the authenticity of a message, please contact us through our official channels. We’ve got the power to energize Your career and spark YOUR Work/Life Balance through professional development and exceptional benefits. Don’t delay, plug in today for an inclusive meaningful career in power, distribution, transmission, engineering, design, technology, or innovation at Mesa Associates,

Decatur, AL 35601 • (23.5 miles) • Full Time • 10/13/2026

Description: Morin Repair Service is seeking an experienced Manual Machinist to join our team. The ideal candidate will have a strong background in an industrial setting working with tools such as lathes, mills, and drill presses. Morin has been recognized as superior in equipment sales, distribution, repair, and service. This is your chance to become a part of a hard working, dedicated team! Under minimal supervision, sets up and operate manual machine shop equipment such as engine lathes, mills and drill presses in skilled precision and bench work in the manufacturing of parts and fabrication, maintenance, repair and alteration of machinery, machine parts, tools and equipment. ESSENTIAL DUTIES AND RESPONSIBILITIES (include the following, however, other duties may apply.) Performs all tas

Huntsville, AL • (11.6 miles) • Full Time • $25.00 / hr • 10/12/2026

Key Responsibilities: Read and interpret blueprints, schematics, and technical manuals for machinery installation, maintenance, and repair Troubleshoot and repair mechanical, hydraulic, and pneumatic systems Safely operate hand tools, power tools, welding equipment, and machining tools Perform routine maintenance, including equipment alignment, calibration, and inspections Assist with machinery setup, breakdowns, and relocations as needed Collaborate with team members and other departments to complete projects on schedule Work flexible hours, including overtime, some Saturdays, and occasional holidays Qualifications: Completion of a recognized Millwright apprenticeship program or equivalent hands-on experience Strong ability to read and interpret blueprints, schematics, and technical docum

Cullman, AL 35055 • (27.7 miles) • Full Time • 10/12/2026

Working at Pizza Hut is about making hungry people happy. It's about being independent and having fun, making new friends and earning extra cash. As a Pizza Hut team member, you can be the smiling face that greets and serves the customers, or a cook who make things happen in the kitchen. Working with us will give you the financial rewards and flexibility to suit your lifestyle. You'll learn new things, get recognized for your efforts and learn skills that last a lifetime. WHAT ARE WE LOOKING FOR? The good news is that your training will teach you everything you need to know to succeed on the job. But there are a few skills you should have from the get-go: You're a fun and friendly person who values customers and takes absolute pride in everything you do. Communication skills are key – you

Huntsville, AL • (11.6 miles) • Full Time • 10/12/2026

Position Title: SeniorOpto-MechanicalEngineer Location : Huntsville, Alabama Job Type : Full Time About EO Solutions EO Solutions is a rapidly growing aerospace and defense company focused on advancing capabilities in Space Domain Awareness and Directed Energy Systems. Our teams work across Hawaii, Nevada, Alabama, and remote locations to solve critical national security challenges with innovative, mission-focused technologies. PositionOverview EO Solutions isseekinga highly skilled Senior Opto-Mechanical Engineer to lead the architecture development, design, integration, and testing of advanced opto-mechanical hardware for High Energy Laser (HEL) weapon systems and related defense applications.This position will play a critical role in developing precision optical and mechanical assemblie

Madison, AL 35758 • (14.8 miles) • Full Time • 10/12/2026

GENERAL DESCRIPTION Candidate will produce parts using standard machining processes. DUTIES Calculate dimensions and tolerances and have significant knowledge of mathematics and precision measurement instruments. Fabricate assemblies or subassemblies using machine tools such as saws, lathes, and milling machines. Makes setup decision relative to part, product and material being used. Measure and examine completed products to ensure they meet drawing and customer requirements. Make adjustments and setup changes of a minor nature on basic machine tools and equipment. Align and secure fixtures, cutting tools, attachments and materials onto machines. Monitor the feed and speed of machines during the machining process and make necessary adjustments to ensure proper machine performance. Evaluate

Huntsville, AL 35805 • (12.1 miles) • Full Time • 10/11/2026

QTEC Aerospace is seeking a ROTARY-WING MAINTENANCE & READINESS ANALYSTto join our team of professionals in Huntsville, AL. The qualified applicant will become part of a team of professionals representing both industry and government. The successful candidate will be detail oriented, have a proven track record and a positive work ethic. Job Summary QTEC Aerospace is seeking an experienced RotaryWing Aviation Maintainer with strong dataanalysis skills to support Condition Based Maintenance Plus (CBM+) and Health & Usage Monitoring System (HUMS) efforts for military aircraft. The successful candidate pairs deep handson maintenance expertise with the ability to interpret aircraft health, reliability, and readiness data to drive actionable recommendations. The ideal candidate would be a former

Huntsville, AL 35816 • (14.2 miles) • Full Time • $140,000 to $175,000 / yr • 10/11/2026

Senior RF Communications Engineer $140,000-$175,000 Base Salary Signing Bonus • Equity • Relocation Assistance Hybrid | Huntsville, AL | Full-Time | 9/80 Schedule This isn't another defense contractor job. Join a mission-focused engineering team developing next-generation RF communications and Electronic Warfare capabilities for national defense. This role is centered on the hands-on development of operational RF communications systems, including waveforms, signal processing, SDR implementation, system integration, and performance in challenged or contested RF environments. Work across SDR, radar, resilient networking, secure communications, and RF sensing technologies while contributing directly to systems from design through integration, testing, and field demonstration. Why experienced

Huntsville, AL 35806 • (16.6 miles) • Full Time • 10/11/2026

RF/Radar Engineer – Mid Level Location: Huntsville, AL; Denver, CO Clearance: Active Top Secret/SCI Position Type: Full-Time About the Role Phased n Research is seeking multiple mid-level RF/Radar Engineers to support radar engineering analysis and production of technically defensible threat-system parametrics for U.S. Air Force intelligence and mission-planning applications. The engineers will perform radar analysis, physics-based modeling, engineering derivation, and technical validation while helping translate proven radar engineering methods into repeatable, AI-assisted analytic workflows. You will work with senior engineers, intelligence analysts, and software developers on physics-based radar modeling and simulation (M&S), engineering analysis, algorithm application and validation, a

Athens, AL 35611 • (31.6 miles) • Full Time • 10/11/2026

About the Role: The Quality Assurance Inspector (2nd Shift) plays a critical role in ensuring that all manufactured products meet stringent quality standards before reaching customers. This position involves conducting detailed inspections and tests on materials, components, and finished products to identify defects or deviations from specifications. The inspector collaborates closely with production teams to address quality issues promptly and implements corrective actions to prevent recurrence. By maintaining accurate records and reporting findings, the inspector supports continuous improvement initiatives and compliance with industry regulations. Ultimately, this role helps uphold the company’s reputation for delivering reliable, high-quality products while minimizing waste and rework.

Decatur, AL 35601 • (23.5 miles) • Full Time • $100,000 to $130,000 / yr • 10/10/2026

Karman Space & Defense is a leader in the rapid design, development, and production of critical, next-generation system solutions that align with the U.S. Department of War and its allies’ core mission priorities, and meet the accelerating demand for access to space. Building on nearly 50 years of success, we deliver Payload & Protection Systems, Aero/Hydrodynamic Interstage Systems, and Propulsion & Launch Systems to more than 80 prime contractors supporting over 130 space and defense programs. The Senior Manufacturing Engineer plays a central role in ensuring producibility, process robustness, and continuous improvement throughout the product lifecycle. This role leads design-for-manufacturability efforts, develops and validates manufacturing processes, and supports production teams by s

Huntsville, AL 35806 • (16.6 miles) • Full Time • 10/10/2026

Job Title: Process Quality Engineer Company: X-Bow Systems Location: Huntsville, AL (on-site) Position Type: Full-Time --- About the Role As a Process Quality Engineer, you will ensure that incoming and outgoing materials, components, and products meet required quality standards, specifications, and compliance requirements, aligning with organizational and customer expectations. This role requires an independent, self-motivated, and highly skilled engineer with extensive knowledge of Quality and Configuration Management to oversee products with minimal guidance, often on accelerated timelines. The position is on-site at X-Bow's Huntsville, AL facility, with some travel (20%).--- Key Responsibilities Quality Requirements and Standards · Define and implement receiving inspection and inventor

Huntsville, AL 35805 • (12.1 miles) • Full Time • $115,000 to $135,000 / yr • 10/10/2026

We're seeking a Senior Electrical Design Engineer to join our client's R&D team. This is a hands-on hardware design role focused on developing next-generation connectivity technologies. You’ll work with a talented team of electrical, hardware, software, and systems engineers to take new technologies from concept through development. The company is looking for an experienced electrical design engineer with strongembedded power electronics and PCB design experience. The right engineer will have the technical foundation and aptitude to learn the exact technology. What You'll Do Design and develop embedded electrical hardware, including power electronics, PCBs, and circuit-level systems. Work closely with hardware, software, and systems engineering teams Perform circuit simulation, modeling, t

Huntsville, AL 35806 • (16.6 miles) • Full Time • 10/10/2026

Microfluidics Fabrication Specialist Location: Huntsville, AL Position Overview SynVivo Inc. is seeking a hands-on Microfluidics Fabrication Specialist to support the production, assembly, testing, and shipment of SynVivo's microfluidic organ-on-chip devices and related instrumentation. This position is focused primarily on fabrication and production rather than research . The ideal candidate is detail-oriented, mechanically inclined, dependable, and enjoys building things and solving practical problems. The successful candidate will work with small-scale components and materials, operate fabrication and laboratory equipment, follow established production procedures, troubleshoot devices and equipment, maintain accurate records, and ensure products meet quality standards before shipment to

Decatur, AL 35603 • (20.7 miles) • Full Time • 10/10/2026

As a Press Operator at Steel Technologies, your main responsibility is to set up, operates and monitors the press. How you’ll contribute to our company: Reconcile coil identity to production and load coil Check and record gauge, width, hardness, camber, burr, and surface requirement and ensure compliance with customer and production requirements Setup the press including dies and alignment of part and scrap chutes/conveyors Setup the press/levelers/flattener to the proper program or required parameters Thread coil thru leveler/flattener, feed unit Monitor condition of blanks to ensure compliance with customer requirements and production instructions Adjust press setup as needed for quality Setup skids on the parts conveyors to ensure no disruption of production Remove scrap from press and

Huntsville, AL 35808 • (7.4 miles) • Full Time • 10/9/2026

Mid-Level Radar/Signal Processing Analyst Location: Huntsville, AL | Onsite Clearance Required: Minimum TS/SCI Clearence Employment Type: Full-Time Join a Growing Team at Weeghman & Briggs Weeghman & Briggs is seeking a motivated and mission-driven Mid-Level Radar/Signal Processing Analyst to support critical government initiatives in Huntsville, AL . Founded in 2016 by Anthony Jordan, Weeghman & Briggs specializes in delivering high-impact analytical services to Government Agencies and private organizations. Since our founding, we have partnered with a range of federal entities and private corporations, earning a strong reputation as a trusted, results-driven company with an exceptional team of professionals. As we continue to expand across current programs and upcoming contract awards, w

Huntsville, AL 35805 • (12.1 miles) • Full Time • 10/9/2026

Position Summary Ethic Tech, LLC is seeking an Electronic Security Quality Control (QC) Manager to oversee the testing, inspection, and compliance of electronic security systems-such as access control, video surveillance, and alarm systems-to ensure installations meet strict quality and contract standards. Essential Duties and Responsibilities Quality Program Management: Develop and implement Quality Control Plans (QCP) and procedures for the installation, testing, and maintenance of Electronic Security Systems (ESS). System Inspections: Conduct routine site inspections and internal audits to verify that work adheres to engineering drawings, technical specifications, and manufacturer guidelines. Compliance & Standards: Ensure adherence to commercial building codes, ISO standards, or federa

Madison, AL • (15.2 miles) • Full Time • 10/9/2026

Job Summary: The Assembly Engineer (Intermediate Level) is a hands-on position responsible for supporting projects from initiation through completion, including fabrication, assembly, programming, testing, customer inspections, and on-site installations. This role performs CNC milling and drilling operations and utilizes a variety of manual fabrication equipment, including lathes, welding equipment, band saws, drill presses, manual milling machines, and cutting tools to fabricate and modify components. The Assembly Engineer programs CNC machines, sets up tooling and fixtures, and builds mechanical assemblies from 2D blueprints and 3D CAD models. In addition to mechanical assembly, this role installs and routes electrical wiring, control cables, and instrumentation in accordance with electr

Huntsville, AL • (11.6 miles) • Full Time • $132,000 to $162,000 / yr • 10/8/2026

Position Title: Senior Electrical / Mechanical Engineer Location: Huntsville, AL Employment Type: Full-Time Salary Range: $132,000-$162,000 Position Summary: RPI Group, Inc. is looking for a Senior Electrical/Mechanical Engineer to support our U.S. Army customer at the U.S. Army Corps of Engineers (USACE) Engineering and Support Center in Huntsville, AL. The Senior Electrical/Mechanical Engineer will represent the company with engineering products and solutions. This position is contingent upon award of contract. Key Responsibilities: Perform engineering analysis, design, development, and technical problem-solving in support of customer requirements. Develop, review, and maintain engineering designs, drawings, specifications, calculations, and technical documentation. Support the design, d

Huntsville, AL 35816 • (14.2 miles) • Full Time • 10/8/2026

Description Applied Technology Solutions, Inc. (ATS) is seeking a talented Integrated Product Team (IPT) Lead to join a growing team of engineers, technicians, and scientists supporting a diverse customer set to solve a complex set of technical challenges. This position is based in Huntsville, Alabama. As a member of the team, a successful candidate will lead cross-functional technical efforts supporting defense and government programs while working closely with highly collaborative team members to: Lead integrated product teams across engineering, operations, quality, logistics, and other functional areas Manage cost, schedule, and technical performance for assigned efforts Perform technical analysis to support system design, trade studies, risk reduction, and decision-making Coordinate r

Scottsboro, AL 35769 • (29.3 miles) • Full Time • 10/8/2026

Summary: Although associates are generally hired to begin in one role, many of our hourly associates perform duties throughout the restaurant. We believe that “cross trained” associates who understand how to perform many roles, lead to higher engagement and greater potential for advancement and promotions. The competencies and basic job description and requirements are listed below, with an in-depth chart showing more specific duties, responsibilities and requirements for each type of role being performed. Competencies: • Strong work ethic and commitment to act with integrity • Excellent communication skills • Team Player, treating others with respect • Commitment to customer satisfaction • Ability to receive coaching and to be accountable for his/her actions • Desire to be empowered to de

Madison, AL 35756-8400 • (15.2 miles) • Full Time • 10/8/2026

Mechanical Engineer – Lead Designer At B&A, we foster and embrace a distinct set of values that we live by and instill in all aspects of our organization: dedication, commitment, partnership, trust, and recognition. We have incorporated these values into successful delivery for our customers since 1988. B&A believes in ensuring its employees feel deeply connected to B&A, recognizing successes and hard work, and providing continuous opportunities to learn and grow. Our people are entrepreneurial thinkers that combine mindset, vision, and experience to drive value – not only to us as an organization, but to the clients we support. We promote a collaborative culture with our clients, and with each other, as one team working towards a common vision. We’d love for you to join our team! Job Summ

Huntsville, AL 35806 • (16.6 miles) • Full Time • 10/7/2026

Electronics Engineering Technician, Mid-Level Overview SimTech, Inc., recognized as one of the 2026 Best Places for Working Parents , is seeking a to join our dynamic and diverse team in Huntsville, AL. This is an immediate opening with opportunities for growth and professional development. SimTech offers a market leading compensation package with excellent benefits, work/life balance, outstanding retirement plan, career advancement and much more. Responsibilities Perform highly skilled surfacemount and platedthroughhole hand soldering and rework. Interpret and work from schematics, diagrams, written or verbal instructions, and defined plans. Fabricate cables and breakout boxes in accordance with technical drawings. Utilize hand and power tools for the fabrication of breakout boxes. Produc

Huntsville, AL 35808 • (7.4 miles) • Full Time • $120,000 to $140,000 / yr • 10/7/2026

Senior Mechanical Engineer ATI has a current need for a Senior Mechanical Engineer for complex, multimillion dollar construction projects. Work will be at Redstone Arsenal in Madison County, Alabama. Great Pay and Benefits for a Senior Mechanical Engineer Competitive Salary of $120,000 - $140,000/year depending on qualifications and experience; 11 annual paid holidays; Paid annual vacation and sick leave; Employee and family health, dental, prescription, and vision insurance with 75% of the premiums paid by the company; 401(k) plan with 4% employer match vesting immediately; Employer paid short-term and long-term disability, and life insurance; and Professional development assistance including memberships, professional licenses, and tuition reimbursements; Duties and Responsibilities Dutie

Huntsville, AL 35805 • (12.1 miles) • Full Time • 10/7/2026

MBDA Incorporated is seeking a Mechanical Design Engineer to support the development and design of mechanical systems. This position is ideal for an engineer who enjoys solving complex design challenges, producing high-quality technical documentation, and collaborating with a multidisciplinary team in a fast-paced environment. Principal Responsibilities Develop mechanical designs and supporting technical documentation. Prepare engineering studies, conceptual designs, layouts, and detailed drawings. Create and maintain interface control drawings and installation drawings. Develop control plans and other design-related documentation. Maintain accurate and organized CAD databases and design records. Collaborate with engineering, manufacturing, quality, program management, and other functional

Madison, AL 35756 • (14.4 miles) • Full Time • 10/7/2026

Job Summary OMCO, a MacLean-Fogg Company is hiring a Quality Engineer for our Huntsville, Alabama manufacturing operation. In this role, you will help establish and maintain quality standards, resolve product and process quality issues, support PPAP activities, and partner across engineering, manufacturing, and supply chain teams to improve quality throughout the product lifecycle. Location: Huntsville, AL Work Arrangement: On-site Schedule: 1st Shift Pay: $85,000–$95,000 USD/year Employment Type: Full-time / Salary What You'll Do as a Quality Engineer Establish and maintain quality standards for products, processes, and systems, recommending improvements that strengthen product quality and prevent defects. Partner with product design, product management, production, manufacturing, and sup

Madison, AL 35758 • (14.8 miles) • Full Time • 10/6/2026

Electronics Test & Debug Technician – Engineering Services Lab Schedule: 4/10 (Mon–Thurs) | Location: On-Site Industry: Aerospace, Defense, High-Reliability Electronics Manufacturing Job Summary DirectPath Recruiting Services is partnering with a rapidly growing electronics manufacturer to identify an experienced Electronics Test & Debug Technician for their Engineering Services Lab. This role is responsible for performing test, debug, troubleshooting, and verification of complex electronic assemblies using a wide range of programming and diagnostic equipment. The ideal candidate has extensive experience interpreting schematics, engineering documentation, AS9100 requirements , and accurately documenting all test and debug activities. Key Responsibilities · Perform test, debug, troubleshoot

Decatur, AL • (22.2 miles) • Full Time • 10/6/2026

Commercial CoordinatorExpert Technical Solutions is seeking ahighly qualifiedCommercial Coordinatorforone of our premier, industry leadingclients inDecatur, AL 35601.This position reports directly to the Director of Sales and serves as their right hand on day-to-dayadministrative and commercial work.This person willprovideexecutive administrative support to the Director ofSales, preparesales and pipeline reporting, and tracknew products and new customers as theymove through onboarding from RFQ through first shipment coordinating between Sales,Customer Service, Production, Engineering, Quality, Planning, and Shipping along the way. This is a Perman ent, ONSITE opportunity that offers excellent pay, strong benefits, and extensive growth potential. Duties and Responsibilities Provide executiv

Huntsville, AL 35808 • (7.4 miles) • Full Time • 10/6/2026

Benefits: Gap Insurance Employee discounts 401(k) Bonus based on performance Competitive salary Dental insurance Health insurance Opportunity for advancement Paid time off Vision insurance Junior Electrical Engineer – Hardware Design Location: Huntsville, AL Employment Type: Full-Time Clearance: Secret clearance or ability to obtain and maintain one Position Overview Created Solutions is seeking a Junior Electrical Engineer to support the development, integration, fabrication, and testing of advanced electronic hardware for defense applications. This position will focus primarily on printed circuit board (PCB) design and hardware development , supporting efforts from design modification and prototyping through fabrication, qualification testing, and field test activities. The successful ca

Fyffe, AL 35971 • (37.8 miles) • Full Time • 10/5/2026

United Steel Fabrication LLC is seeking a reliable and skilled Beam Line Operator to join our growing team. Our company specializes in structural steel fabrication, industrial assemblies, and miscellaneous projects, with a strong emphasis on teamwork and a family-like culture. The Beam Line Operator will be responsible for operating and maintaining beam line machinery to cut and process steel beams according to project specifications and quality standards. This role requires attention to detail, mechanical aptitude, and a commitment to safety. The successful candidate will collaborate with other team members to ensure efficient production and timely completion of projects. If you are motivated, safety-conscious, and take pride in craftsmanship, we encourage you to apply and become part of

Huntsville, AL 35808 • (7.4 miles) • Full Time • 10/5/2026

Multiple positions. The Quality Engineer will support work associated with the Marshall Space Flight Center (MSFC) SMASS II contract located in Huntsville, AL RESPONSIBILITIES: Technical responsibility for interpreting, organizing, and coordinating assignments; plans and developing S&MA engineering and assurance activity that may have an important effect on major programs. Prepare, evaluate and provide assessments of in-house and contracted quality related processes, procedures and manufacturing activities including implementation of procedures. Specifically with contractor manufacturing systems. Perform reviews and assessments of QA/QE documentation for compliance with NASA policy, Marshall Management System (MMS), Safety and Mission Assurance (S&MA) directorate organizational instruction

Huntsville, AL 35802 • (10.1 miles) • Full Time • 10/5/2026

MDR is looking for an amazingly talented Principal GNC & Trajectory Analyst to join our team! In this role you will provide technical and advisory assistance to Targets Program Office by aiding in the refinement and implementation of Target trajectories in support of the agencies flight test events to validate the weapon and system sensors. What You'll Be Doing: Support the Missile Defense Agency (MDA) Directorate for Test (DT) Targets program office with development of missile defense target vehicles Support the Targets System Engineering team in all aspects of target design, analysis, and test to include requirements development and assessment, modeling and simulation, test analysis and reporting Utilize knowledge, skills and experience with missile characteristics (physical, kinematics,

Huntsville, AL 35806-2183 • (11.6 miles) • Full Time • 10/5/2026

Description: What You'll Be Doing: Support the Missile Defense Agency (MDA) Directorate for Test (DT) Targets program office with development of missile defense target vehicles Support the Targets System Engineering team in all aspects of target design, analysis, and test to include requirements development and assessment, modeling and simulation, test analysis and reporting Utilize knowledge, skills and experience with missile characteristics (physical, kinematics, signatures) and engineering to support engineering activities and data product development Technical focus areas include Guidance Navigation and Control (GNC), Modeling and Simulation (M&S), and vehicle performance assessments Generate and analyze target vehicle 6-DoF and 3-DoF trajectory data using industry standard (e.g., TAO

Huntsville, AL 35805 • (12.1 miles) • Full Time • 10/5/2026

Mechanical Design Engineer At ReLogic Research, you won’t be just another headcount. We’re a tight-knit team of engineers, physicists, and technical professionals solving complex challenges in national defense and we’re looking for engineers who enjoy building real hardware and getting the details right. As an AS9100D-certified small business supporting the Army, Navy, Air Force, and Missile Defense Agency, we move fast, trust our people, and give engineers meaningful ownership of their work. Unlike larger organizations, our engineers work directly across design, build, integration, and technical problem-solving. This role is ideal for engineers who enjoy designing and maturing real hardware in CAD, solving practical mechanical problems, and working closely with fabrication, assembly, and