San Antonio, TX • (18.4 miles) • Full Time • 9/13/2026

The Production Planner with Factory Floor Experience will oversee and optimize production schedules to ensure efficient resource use and timely product delivery. This role requires direct daily involvement with factory floor teams and occasional travel between production sites. The planner will use ERP systems and spreadsheets to coordinate workflow, support quality control, and drive continuous process improvements.ResponsibilitiesPlan and schedule production activities to meet pre-determined customer required project completionsAllocate resources effectively across multiple production sitesCoordinate workflow with factory floor teams through daily interactionSupport quality control processes to maintain product standardsAnalyze production data and generate performance reportsIdentify and

San Antonio, TX • (18.4 miles) • Full Time • 9/12/2026

DESCRIPTIONThe Electronics Manufacturing Technician is responsible for assembling and configuring all components of an electronic security system in preparation for a full-system factory test, and ultimately, final installation.RESPONSIBILITIES· Read and interpret plans, schematics, specifications, wiring diagrams, and functional block diagrams· Partner with the engineer and programmer for each project to ensure equipment is assembled in accordance with the contract requirements and project documentation for each project.· Assemble all electronic components in racks, enclosures, or free-standing equipment for each project.· Properly store and track all equipment delivered for each project.· Label all electronics components for each project, including HMI stations, CPUs, racks, wires, and a

Buda, TX 78610 • (40.8 miles) • Full Time • 9/12/2026

Production TechnicianJob DescriptionWe are seeking skilled Production & Postproduction Packagers who will be responsible for utilizing custom machinery to efficiently cut, chop, pulverize, mix, and blend ingredients. This role involves loading raw materials into machinery to prepare and formulate powders. Additionally, Postproduction Packagers will capsulize and package finished products in various formats including pouches, bottles, and boxes.ResponsibilitiesOperate custom machinery to cut, chop, pulverize, mix, and blend ingredients.Load raw materials into machinery to prepare and formulate powders.Capsulize and package finished products in pouches, bottles, and boxes.Read work instructions and spec sheets to follow customer orders.Measure product to dispense into containers, bottles, po

Boerne, TX • (28.1 miles) • Full Time • 9/11/2026

Wanted....The Right Team Member.....Are you passionate about 20’s -70’s Vehicles? This position is ideal for someone Semi Retired and tired of not making a difference, or just bored? Or do you have some interest/experience in this field and have always wanted to peruse that passion? Can you work alone with support and leadership? Know your way around Toolboxes and Equipment? Can you Weld/Fabricate? Do you relish a Challenge? Are you honest/truthful in your abilities? You don’t have to know everything, we can teach you to evolve your skill sets but we need your honesty and dedication. We do some restorations, but mostly repair and/or updates and keep the Old Ones on the road. We specialize in vehicle wiring, plumbing, brake concerns, etc. The things most Shops avoid. They want the simple th

Stockdale, TX 78160 • (35.1 miles) • Full Time • 9/11/2026

The operator is responsible for performing various tasks which benefit and facilitate the transfer of water from a remote source to a drilling or completions site. These tasks may include, but are not limited to, deployment and coupling of various lengths of lay-flat hose or polyethylene tubing, operation of source and inline pumps, monitoring of tank levels, movement and installation of pumps, manifolds, and sensors from one jobsite to another, troubleshooting and maintenance of all mechanical components utilized, and landscape maintenance in the area of water pits and line routes.

San Antonio, TX • (18.4 miles) • Full Time • 9/9/2026

Proman Skilled Trades is currently seeking experienced Sheet Metal Mechanics. The mechanics will be working in large scale construction projects in the San Antonio area.Responsibilities:Install sheet metal duct (squared, round spiral, rectangular)Must have some pipe fitting experience, know how to apply pookie and insulateInstall grills and dampers and set unitsSet curbs for RTUsAdhere to all quaity and safety codesQualifications:Minimum 3/4 years of commercial experience in HVA, Sheet metal field, Familitary with Sheet metal schematics, blue prints and manuals. Familiarity with sheet metal equipment and hand toolsMust be able to handle a physical work loadMust have own tools and reliable transportationProblems solving, troubleshooting and critical thinking skillsPAY is based on experience

San Antonio, TX • (18.4 miles) • Full Time • 9/9/2026

About UsRiver City Industries (RCI) is a San Antonio-based sheet metal and precision components manufacturer serving the aerospace and defense industries. We are AS9100 and ISO 9001 certified, and our work supports customers who demand tight tolerances and dependable quality. We're looking for a detail-oriented Quality Control Inspector to join our shop floor team.About the RoleAs a Quality Control Inspector, you'll verify that parts meet engineering and customer requirements at key points in the production process. No prior QC experience is required on-the-job training is provided. We're looking for someone who is dependable, detail-oriented, and eager to learn precision measurement.ResponsibilitiesRead and interpret engineering drawings, including GD&T (Geometric Dimensioning and Toleran

Austin, TX 78737 • (43 miles) • Full Time • 9/9/2026

The Opportunity: We have a vision to be the Amazon of chemicals and seek top talent to participate in our continued growth. Our Chemical Technician (Production Associate) team plays an integral role in helping us achieve this vision by ensuring that we safely and accurately prepare products for our customers.At Lab Alley, we handle a variety of chemicals in a safe, controlled environment. Some chemicals require the use of personal protective equipment (PPE), including respirators. Employees are fully trained on all procedures, and we prioritize safety above all else.Important Note: If you are hesitant about working with or around chemicals, even in a controlled and safe environment, this is not the role for you. Due to respirator fit requirements, individuals with beards who are unwilling

Cibolo, TX 78108 • (6.2 miles) • Full Time • 9/6/2026

A QA Technician is the final eye for FHE, making sure that the product meets all FHE’s procedural expectations before shipping products/equipment to the customer.Shared Job Description/Expectations:• Maintain work area to be clean, organized, and safe following 5S standards.• Must attend work as established by employer without excessive absenteeism.• Conduct oneself in a professional manner that represents a positive image of FHE.• Manage inventory (Admin).• Prioritize job orders.• Complete quality control documents, enter correct data into computer, upload pertinent info into Core (Admin).• Validate all info from all departments and compare to customer sales order for accuracy (Admin).• Learn the different types of equipment and products used at FHE and the purpose they serve.• Learn meas

San Antonio, TX • (18.4 miles) • Full Time • 9/4/2026

Manual Machinist5500 N. Loop 1604 E., San Antonio, TX 78247 Full-Time | Mon - Fri | 7:00 AM - 4:00 PM | $22 - $32 per hourAbout Cox Manufacturing Cox Manufacturing is a family owned and operated organization. Our purpose is to love God, love people, and advance American Manufacturing. We provide high volume, precision-machined parts from bar stock. As one of the largest turning shops in the nation, we are growing with patented technology and apprenticeship opportunities. Our core values Teamwork, Continuous Improvement, Perseverance, and Excellence drive everything we do. If you're looking for meaningful work at a company that values purpose, we invite you to join our team.Job Responsibilities:Setup and operate engine lathes and knee mills to produce precision parts.Read, interpret, and w

San Antonio, TX 78245 • (31.3 miles) • Full Time • 9/4/2026

Tacoma EnergyLooking for a highly driven person who wants to join a growing company in the new energy efficiency industry.*** Not a sales position ****** No homeowner interaction ***We are looking for an outstanding person who wants to learn a new and rapidly expanding industry. This person must be willing to learn from the ground up. On the job training, education and certifications are provided. This position will be primarily located in the San Antonio area.We offer:Starting pay $20.00-22.00/hour, based on experienceHealthcare – medical, dental, visionHoliday payFull-time401kOn the job training & certificationsIndependent work environmentResponsibilities:Identify areas of the home which may result in air leakage or duct system leakageTrouble shoot and identify reasons for whole house ai

New Braunfels, TX 78131 • (10.4 miles) • Full Time • 9/3/2026

Position SummaryThe Water Line Tech I performs tasks, under close supervision, requiring mechanical aptitude and physical labor to assist in the installation, maintenance, operation and repair of water distribution and wastewater collection infrastructure and operation of related tools and equipment. Assignments are limited in nature, require physical effort for extended periods, and performed in accordance with detailed instructions.Essential Duties & ResponsibilitiesASSIST WITH:- Installation, maintenance, and repair of water/sewer mains and services, taps, fire hydrants, valves/stops, manholes, meter, pumps, motors, lift stations, and associated equipment and materials.- Tapping of water and sewer pipes- Smoke testing of manholes- Televising sewer mains and sewer laterals- Installation

McQueeney, TX 78123 • (15.3 miles) • Full Time • 9/3/2026

Job Title: AssemblerJob Summary:The Assembler puts together metal products and packages them following specific instructions. This role reports to the Operations Manager and receives daily guidance from the Production Team Lead.Key Responsibilities:Assemble metal parts using tools and machines.Follow written instructions and assembly drawings.Maintain tools and equipment; report needed repairs.Keep track of tools and materials; request more if needed.Check finished products for quality and report any issues.Keep work area clean and safe.Perform other related tasks as assigned.Skills and Abilities:Able to read and follow instructions and diagrams.Detail-oriented and reliable.Works well in a team.Can handle basic equipment maintenance.Basic reading, writing, and math skills.Education and Exp

San Antonio, TX • (18.4 miles) • Full Time • 9/2/2026

Responsibilities:Provide hands-on controls support for production equipment, automated machinery, and manufacturing systems.Troubleshoot and resolve Siemens PLC, NC/CNC, HMI, I/O, motion control, drive, and network-related issues.Diagnose faults using Siemens STEP 7 and TIA Portal and perform safe program modifications when required.Support Siemens PLC platforms and associated NC control systems used in manufacturing and machining operations.Respond to equipment downtime events, perform root cause analysis, and restore production in a timely manner.Maintain backups of PLC/NC programs, machine parameters, and control system documentation.Collaborate with maintenance, manufacturing engineering, quality, operations, and OEM suppliers to resolve technical issues.Support equipment commissioning

San Antonio, TX • (18.4 miles) • Full Time • 9/1/2026

Home Care Scheduling and Office CoordinatorCardinal Senior Care | San Antonio, TXFull-Time | In-PersonJoin Our Growing Home Care TeamCardinal Senior Care is looking for a strong and experienced Office Coordinator with Home Care industry experience to help manage and coordinate our busy office operations.This is not an entry-level administrative position. We need someone who understands the fast-paced nature of home care and can confidently handle scheduling, caregiver coordination, recruiting, and daily office responsibilities.You must be:Highly organized and dependableWilling to take ownership and accountability, even in challenging situationsAble to work independently with minimal supervisionStrong in communication and follow-upComfortable using scheduling and office softwareDynamic indi

Buda, TX • (40.9 miles) • Full Time • 9/1/2026

Job DescriptionCoordinate the day-to-day activities of a company operation. Assist in the implementation of policies and procedures, customer/client resolutions and project management.Primary Job Tasks, Responsibilities and Key AccountabilitiesCoordinates projects and materials according to production and shipping schedules. Establishes priorities in accordance with overall department requirementsProvides and supports managers in administrative functions to include phone coverage, travel arrangements and reportingCommunicates with customer regarding scheduling, status and technical issuesCoordinates daily operations of the company or department and its various components, ensuring compliance with company, local, state, and federal policies and regulationsObtains and reviews documentation,

Kyle, TX 78640 • (37.5 miles) • Full Time • 8/30/2026

Position Summary:TEJAS ORIGINALS LLC is looking for a driven and experienced Manufacturing Operations Manager to lead our production team in Kyle, TX. This is an opportunity to take ownership of day-to-day manufacturing operations and make a real impact. If you thrive in a fast-paced environment and have a passion for operational excellence, we want to hear from you!As the Manufacturing Operations Manager you will be running a manufacturing shop that creates cabinet substrates for outdoor kitchens, fireplaces and fire pits. You need to have some experience working with your hands and take pride in excellent work created by you. You will be the point of the spear in making sure that all products leaving the factory are manufactured correctly. This is a hands-on position where you will need

San Antonio, TX • (18.4 miles) • Full Time • 8/29/2026

Must have minimum 3 years' experience in residential plan development.Full time / part time position in office only. No remote work.Email resume and work history.

San Antonio, TX 78218 • (11.9 miles) • Full Time • 8/27/2026

About the Role:Join WKC GLASS LLC as a Glass Fabricator and become an integral part of our dedicated team in San Antonio, TX! In this exciting role, you will work with high-quality glass products, ensuring precision and craftsmanship in every piece.Responsibilities:Cut, shape, and polish glass according to specifications and project requirements.Operate glass fabrication machinery with a focus on safety and quality.Inspect finished products for defects and ensure adherence to quality standards.Collaborate with team members to meet production schedules and deadlines.Maintain a clean and organized workspace to promote safety and efficiency.Assist in troubleshooting and resolving production issues as they arise.Follow all company policies and procedures related to glass fabrication.Requiremen

San Antonio, TX • (18.4 miles) • Full Time • 8/27/2026

American Air Conditioning & Heating is looking for experienced Commercial Sheet Metal Mechanics / HVAC Duct Installers to join our commercial HVAC team.We have multiple active projects throughout the San Antonio and Austin areas and are looking for dependable installers who know the trade, have their own basic tools, and can work without constant supervision.This is not an entry-level position. We need people who understand commercial HVAC duct installation and can look at a set of plans, understand what needs to be installed, and get the work completed correctly.ResponsibilitiesInstall commercial HVAC ductwork including rectangular, spiral, round, flex duct, diffusers, grilles, and related accessories.Read and understand mechanical plans and duct layouts.Properly hang, support, seal, and

San Antonio, TX • (18.4 miles) • Full Time • 8/26/2026

Labor On Demand has openings forAssembly Technician - TransformersLocation: San Antonio TX 78218Schedule: Monday - Friday 7:30am - 4:30pmCompensation: $16/hrJob SummaryTheAssembly Technicianis responsible for assembling custom and prototype transformers in an industrial production environment. Working as part of a team of approximately 6–10 employees and reporting directly to the Production Manager, this position performs mechanical assembly using hand and power tools while following established production procedures, quality standards, and safety requirements.This is ahands-on, physically active position performed primarily in an outdoor/open-shop environment. Employees must be prepared to work in changing weather conditions, includingextreme heat and cold, as well as a dusty and dirty in

Boerne, TX 78015 • (22.5 miles) • Full Time • 8/25/2026

Looking for both an Hvac and a Refrigeration Technicians. This is for commercial units. Experience is a must. Five years is a minimum. You will be given a company vehicle, company fuel card, company phone. Position has potential for advancement as company is fast growing.

San Antonio, TX • (18.4 miles) • Full Time • 8/24/2026

The Food Production Assembly Worker is responsible for assembling, packaging, labeling, and preparing food products in accordance with company quality, food safety, and production standards. This position requires working efficiently in a fast-paced production environment while maintaining cleanliness, accuracy, and compliance with all food safety regulations.Essential Duties and ResponsibilitiesAssemble food products according to production specifications and work instructions.Package finished products into containers, boxes, or cases for shipment.Label products accurately according to customer and regulatory requirements.Inspect products for quality, appearance, and proper packaging.Follow Good Manufacturing Practices (GMPs), HACCP procedures, and all food safety requirements.Maintain a

San Antonio, TX 78227 • (26.7 miles) • Full Time • 8/24/2026

ADMINISTRATIONMaintain a production schedule & processing of orders as required by due datesMaintain folders on each design with detailed information as to thread colors used on various colors of garments, hooping location, fonts & size of text used for names, emb fees charged, etcTrain & Implement more efficient procedures & look for new products to improve our embroidery processes & quality of embroideryAt the end of each day, check to see what orders were finished, what new orders came in, any rush orders received & plan the production schedule for the next day.PRODUCTIONStaging - remove all plastic bags, clips, tissue paper etc from garments, sort by size & colors & lay out on table to be ready for hoopingProvide design/emb machine production sheets for thread color sequences to be ent

San Antonio, TX • (18.4 miles) • Full Time • 8/23/2026

For more than 30 years, SQA Services has been a leading provider of managed supplier quality services, offering audits, assessments, remote surveillance, corrective actions, remediation, inspections, and engineering solutions to manufacturers across all industries. We deliver these services by deploying a network of highly skilled associates based throughout the United States and in over 90 countries worldwide, ensuring rapid on-site support at your supplier locations. Our associates are expert quality assurance professionals with extensive experience and local expertise, enabling us to represent our clients on-demand and with greater speed and efficiency than our competitorsWe’re hiring for a Quality Cable & Harness Inspector position in San Antonio, TX.The schedule is on first shift, ful

San Antonio, TX • (18.4 miles) • Full Time • 8/22/2026

Seeking an experienced Small Engine Repair Mechanic with expertise in 2-stroke and 4-stroke engines, as well as basic hydraulic systems for small tools and equipment. Responsibilities include diagnosing and repairing gas- and electric-powered equipment such as tillers, chainsaws, pumps, hoses, belts, and related machinery. Experience with minor diesel engine repairs is a plus.The ideal candidate will have strong organizational skills, be capable of managing workflow in a small business environment.We offer a flexible schedule and a friendly, supportive work environment. Retired or semi-retired professionals are encouraged to apply.Position Details:Full-time or part-time availableFlexible schedulingHands-on repair and maintenance workRequirements:Previous small engine repair experience requ

San Antonio, TX • (18.4 miles) • Full Time • 8/21/2026

Washing Equipment of Texas (WET) is a full service company in the industrial cleaning equipment market. We are looking for service technicians with strong mechanical and industrial AC electrical skills. Diesel Engine experience a plus but not required. This position will be part of a team that provides quality customer service through the installation of new equipment, diagnosing and repair of existing equipment and communicating any additional needs of the customer to the appropriate department(s).TRAINING IS PROVIDED.Extensive Benefits:• Competitive Salary.• Bonus Program.• Several Health Insurance plans to choose from.• Multiple Supplemental insurance plans to choose from.• Group Life Insurance.• Retirement Plan with company matching.• Paid Vacations.• Holiday and Sick Pay.• Uniforms, V

San Antonio, TX • (18.4 miles) • Full Time • 8/19/2026

Description: Job Title: Lead Manufacturing EngineerDepartment: Manufacturing Engineering (ME)Reports To: Plant Mgr. (solid line) and dotted line to ME Mgr for functional direction.Status: ExemptDirect Reports: Staff Manufacturing Engineer, and InternsJob Type: Onsite full timeJob Summary:Lead Engineer will support the Continuous Improvement/ME department through the creation, and maintenance of engineering systems. The Lead Engr. is expected to bring concepts and practices focused on Lean/Six Sigma to improve the overall efficiency and effectiveness of Reyes Automotive Group’s manufacturing operations.Main Duties and Responsibilities (Other duties may be assigned)· Support the Plant Manager and Continuous Improvement team with daily tasks.· Implement Lean Manufacturing principles to produc

San Antonio, TX 78247 • (8.2 miles) • Full Time • 8/16/2026

Job Title: Lead Mechanical Engineer – Autonomous RoboticsLocation: San Antonio, Texas Department: Engineering Reports To: Hardware Engineering Manager Job Type: Full-TimeAbout Renu Robotics:Renu Robotics is a leader in autonomous technology for vegetation management. We build all-electric, autonomous machines that help maintain large-scale sites safely, efficiently, and sustainably. Our culture values teamwork, quality, safety, and continuous improvement. At Renu Robotics, we believe: No one wins unless everyone wins.Job Summary:We are seeking a Lead Mechanical Engineer to drive the design, development, and integration of industry-leading cutting-edge autonomous robotic systems. This role will oversee mechanical design efforts across multiple projects, lead a team of engineers, and collabo

San Antonio, TX • (18.4 miles) • Full Time • 8/16/2026

OEM, Inc. is an established engineering and manufacturing company with more than 46 years of industry experience. We design, fabricate, manufacture, and support specialized safety testing equipment used throughout the oil and gas industry, serving customers in more than 50 markets worldwide.We are seeking a motivated Mechanical Engineerto join our engineering team. This position is ideal for an engineer who enjoys designing products, solving manufacturing challenges, improving engineering processes, and taking ownership of projects from concept through production.This role reports directly to the Engineering Manager and works closely with manufacturing and salesto develop innovative, manufacturable, and cost-effective solutions.Responsibilities:Design and develop new products, assemblies,

Blanco, TX 78606 • (32.9 miles) • Full Time • 9/4/2026

Benefits:401(k)Competitive salaryHealth insurancePaid time offTuition assistanceVision insurance Cimarron is seeking a skilled Soft Goods Technician to join our growing team in Cedar Park, TX. In this role, you will fabricate, assemble, and repair soft goods components, including engine insulation blankets and other heat-resistant textile materials used in flight parts. Your expertise in sewing, patternmaking, and fabric manipulation will directly support mission-critical projects that are defining the future of aerospace exploration and commercial space travel. Key Duties:Fabricate, assemble, and repair soft goods components from a variety of aerospace-approved materials.Interpret engineering drawings, technical specifications, and work instructions to produce high-quality textile product

San Antonio, TX 78258 • (12 miles) • Full Time • 9/11/2026

Team Members At CAVA, we love what we do, and we try and make every day as fulfilling as the last.Our restaurants need team members to make the magic happen every day.Everyone matters and we’re here to celebrate your growth.Wefoster a culture built on five core values:Positivity–Every one of us can change someone’s day for the better.Transparency–We use transparency to help us make decisions through open dialogueHumility– We can always find ways to improve.Fanaticism– We are passionate about the opportunity to turn every guest into a fanatic.Thoughtfulness–We go above and beyond for our guests, our teams and communities.The Role: Team members are responsible for creating exceptional guest experiences for each customer, every time they walk through our doors. From greeting guests with genui

San Antonio, TX 78201 • (18.4 miles) • Full Time • 9/11/2026

Mechanical Engineer – Engine & Equipment ControlsLocation: San Antonio, TX Job Type: Full-time, On-SiteCompensation: $80,000+, Commensurate with experienceAbout This OpportunityAn established manufacturer of electronic control systems and electrification solutions for industrial, off-highway, agricultural, and commercial vehicle equipment is looking for a Mechanical Engineer for their growing engineering team in San Antonio, TX. This is a hands-on design role on a fast-moving product development team, with direct, close-in access to leadership and customers from day one.What You'll DoDesign mechanical and electro-mechanical components used in engine control systems and battery enclosures for demanding industrial and off-highway applicationsLead design analysis (FEA, CFD), design reviews, D

San Antonio, TX 78201 • (18.4 miles) • Full Time • 9/10/2026

Job Title: Engineering Technician - Oil & GasJob DescriptionSupport project by executing chemical and petroleum lab scale experiments. Build up test equipment, compile, and report test data. Work with engineers to generate mass balances and data compilations. Perform sample collection and equipment maintenance/troubleshooting. Training provided lead engineer.ResponsibilitiesExecute chemical and petroleum lab scale experiments.Build and modify test equipment as needed.Compile and report test data.Collaborate with engineers to generate mass balances and data compilations.Perform sample collection.Maintain, troubleshoot, and repair instrumentation, mechanical, and electrical equipment.Assist in the safe start-up, operation, and shutdown of plant equipment.Inspect equipment at periodic interva

Schertz, TX • (5.6 miles) • Full Time • 9/10/2026

We're hiring for entry-level automotive roles at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. In these entry-level roles, you'll have several positions to choose from:Detailer: detailing vehicles, including washing, interior cleaning, and exterior buffingLot Attendant: move vehicles from one department to the next in our Inspection CentersPhotobooth Associate: take photos of our vehicles so customers can see our vehicles in our spinnersInspection Associate: inspect the interior and exterior of the vehicles and accurately identify any imperfections/defectsPay: Starting pay for this position is $15/hr.Schedule: We offer two shifts at this location. Please keep in mind that all locations are subject to ma

Von Ormy, TX 78073 • (33.5 miles) • Full Time • 9/9/2026

Benefits:Dental insuranceHealth insurancePaid time offVision insurance Plant Helper – Dry Sand PlantArepet Industries, LLC – Von Ormy, TXFull-Time | 12-Hour Shifts | 4 Days On / 4 Days OffBenefits Health insurance Dental insurance Vision insurance Paid time off Position Summary Arepet Industries, LLC is seeking dependable Plant Helpers to support operations at our dry sand processing and loadout facility in Von Ormy, TX. The Plant Helper performs general labor, housekeeping, equipment support, and production assistance throughout the facility. This is a hands-on industrial position that requires employees to work both indoors and outdoors around processing equipment, conveyors, mobile equipment, truck traffic, sand, dust, and noise. This position is designated as Safety Sensitive and works

San Marcos, TX • (26.8 miles) • Full Time • 9/9/2026

Epic Piping has an exciting opportunity available for a Painter to be an integral part of our Paint team. Epic takes pride in our quality of work and has a goal ofbuildingour workforce with the most talented employees. You’ll have an opportunity to work on a wide range of projects on a national and global scale. We can meet you at any skill level, whether you are just starting your career or have years of experience under your belt.WHAT YOU’LL DO:Applies paints, surface preparatory materials and undercoating materials to a variety of surfaces, as appropriate, and according to Materials Safety Data Sheets ensuring compliance with hazardous materials guidelines.Observe machine gauges and equipment operation to detect defects or deviations fromstandards andadjust,as necessary.Determine paint

San Antonio, TX 78264 • (32.9 miles) • Full Time • 9/9/2026

KAYGEN is an emerging leader in providing top talent for technology-based staffing services. We specialize in providing high-volume contingent staffing, direct hire staffing and project-based solutions to companies worldwide ranging from startups to Fortune 500 and Managed Service Providers (MSP) across a wide variety of industries. Job Description:As per HM, the top skill for this role is - Robotics, PLC and machine experience. HM is open for candidates who are fresh out of college or some hands-on experience with Robotics and PLC will also work.PLC Toyupuc & Aamaron – Team does not use Allen Bradley & Siemens but open for candidates who have them.On-site robot programming and interlocking.Develop equipment countermeasures during set up/trialsPrepare and confirm new Body weld equipment a

San Marcos, TX 78666 • (25.3 miles) • Full Time • 9/8/2026

Job Title: Production SupervisorLocation: 100 Thermon Dr, San Marcos, TXReports to: Production ManagerOverview:The Production Supervisor is responsible for leading daily manufacturing operations in a fast-paced industrial environment to ensure safety, quality, productivity, and delivery targets are met. This role requires a strong people leader who can motivate, develop, and manage a team while driving continuous improvement and operational excellence. This position will work a rotational schedule as needed to support our wire plant production.Key Responsibilities:Production & Operations Management· Oversee day-to-day production activities to ensure schedules, quality standards, and efficiency targets are achieved· Coordinate workflow, staffing, and resources to meet production demands in

San Marcos, TX 78666 • (25.3 miles) • Full Time • 9/7/2026

Description: Position Summary:The Machine Operator plays a key role in ensuring efficient production flow within the metal building insulation laminating operation. This position is responsible for the safe setup and operation of laminators and band saws, interpreting production work instructions to ensure all materials and processes meet customer specifications. The Machine Operator provides direction to General Laborers during machine setup and maintains accountability for production quality, documentation accuracy, and inventory control. This role directly supports safe and continuous operations, production efficiency, and cost control through accurate material, waste, and productivity tracking.Key Responsibilities:Machine OperationPerform daily machine safety inspections and complete s

Luling, TX 78648 • (39.5 miles) • Full Time • 9/6/2026

Mechanical Tooling/Equipment Development EngineerLocation: Luling, TX (Remote/Hybrid/On Site)X-Bow Systems is a leading non-traditional producer of solid rocket motors, revolutionizing the aerospace and defense industries with innovative, low-cost, and rapid advanced manufacturing solutions, including our patented "Rocket Factory in a Box" concept. Our team is composed of seasoned industry veterans and new-space entrepreneurs committed to pushing boundaries and delivering robust solutions for national security and commercial space applications. Job DescriptionWe are seeking a knowledgeable and motivated Mechanical Tooling/Equipment Design Engineer to lead the design, development, installation and commissioning of specialty manufacturing equipment for solid rocket motor (SRM) R&D and produc