SCHEDULE: 12:00 PM - 9:00 PMHOURLY RATE: $32.64Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety.What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture.Our Diesel Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Utilizing diagnostic software, the Mechanic is responsible for interpreting failure modes and initiate or assign necessary repairs. At times, the Mechanic may be on call, and required to assist with emergency breakdowns.Applicants must be at least 18 years of age and legally eligible to work in the United States.A valid driver’s license is required. CDL preferred.Experience working on heavy duty diesel equipment OR training from a recognized trade school is required.Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records. Must be able to meet the physical and safety requirements of the position.Must be able to provide own toolsEntry-level candidates will be considered for this position and on-the-job training provided. Candidates with the following experience may be considered for a Mechanic B or A level position which has a higher level of responsibility as well a compensation:2+ years experience working as a heavy duty Diesel MechanicExperience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar.Working knowledge of applicable DOT and OSHA standards and regulations.Other duties as assigned.This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice.Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment andprohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.USD $32.64/Hr.

Move forward with us! At NJ TRANSIT, you'll join us in transforming the third-largest transportation agency in North America. We are committed to delivering safe, reliable service that gets customers to their destinations on time–and we're looking to hire talented folks with a commitment to excellence to make it all possible. Summary: Mechanic B-Electrical Shop Electricians conduct general and specialized installation, maintenance, and repair on various types of electrical equipment. Roles and Responsibilities: Must present one of the following: New Jersey Electrical License, Certificate of Completion of Apprenticeship Electrician from the NJ Department of Labor Office of ApprenticeshipORfive (5) years of electrical experience in commercial, industrial and/or residential environments.Ability to read and interpret technical documents, wiring diagrams, schematics, construction drawings, etc.Experience with troubleshooting and repairing electrical systems.Must pass New Jersey Transit’s Electrician Aptitude Test.Present a valid driver’s license andHigh School Diploma or GED.Successfully pass the pre-screening process including drug test, physical, and criminal, employer, and driving background checks. Education, Experience, and Qualifications: Installing low or medium voltage equipment, panels, motors, controls, etc.Installation, maintenance, and repair of electronic systems, PLC’s, Controllers, Computers, Alarms, PA’s, etc.Test equipment such as multi-meters, insulation testing, phasing, etc.Using and understanding code requirements, including NEC, NESC, OSHA, IEEE, NFPA, etc.Prior railroad, transportation, or military experience. Physical Requirements Stoop, bend, crawl, balance, climb, kneel.Be exposed to equipment that intensifies the heat factor on an occasional basis.Wear protective equipment such as hardhat, safety glasses, and safety-toe boots.Work Locations:Redbank, Hoboken, and Raritan, NJ.This is a Unionized position. Rate of pay: The pay rates are tiered and are non-negotiable based on years and types of experience.Tiers start at $29.11 (80% of the full rate), $32.75 (90% of full rate), $36.39 (100%). At NJ Transit, you will enjoy a competitive salary and excellent benefits package: Comprehensive Family Health Insurance – Medical, Prescription, Dental, VisionFlexible Spending AccountLife InsurancePaid LeaveTuition AssistancePre-Tax Commuter BenefitsPlanRetirement Plans 401(a) - Retirement plan with a 6% employer contribution401(k) - Retirement saving plan with up to an 3% company match457(b) - Deferred Savings Plan At NJ TRANSIT, diversity and inclusivity are vital to our success as are committed to hiring individuals from diverse backgrounds, experiences, abilities, and veteran status. As an Equal Opportunity Employer, we encourage all qualified applicants to apply and join our team. Learn more about NJ TRANSIT! Sign up to receive an invitation to our next live information session at WWW.NJTRANSIT.COM/BEST This position is deemed safety sensitive per the Department of Transportation (DOT) Drug and Alcohol Testing Regulations. The DOT Drug and Alcohol Testing Regulation 49 CFR Part 40 does not authorizethe use of marijuana for any reason. It is unacceptable for any safety-sensitive employee subject to drug testing under DOT regulations to use recreational or medical marijuana. The prohibitionincludes any derivative of marijuana such as CBD oils, teas, etc. The use of recreational and medical marijuana is a violation of NJ TRANSIT’s Drug and Alcohol-Free Workplace Policy for safety-sensitive employees. www.njtransit.com INDRA1

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation:Competitive pay from$35-$50 per hour DOE. Sign on Bonus: up to $3,000.00 DOEOngoing Education & Training:Access to state-of-the-art facilities and paid online training.Comprehensive Benefits:Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work:Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks:Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities: This position is responsible for assisting in the repair and overhaul of equipment, refrigeration, heating, and ventilation equipment to ensure customer needs are met efficiently, accurately, and on time.Provides service to the customer base by repairing and overhauling equipment, such as compressors, water pumps, air handlers, and electrical and mechanical control devices in a safe, efficient, and timely manner that exceeds customers’ expectationsProvides general repair work on refrigeration, heating, and ventilation equipment, such as air conditioning units, evaporative condensers, ice machine equipment, water pumps, gas furnaces, compressors, and electric motors in a safe and timely manner.Provides preventative maintenance activities for customers by diagnosing equipment malfunction and any operating deficiency of the mechanical equipment to ensure quality work performance for the customer base.Test malfunctioning systems and components using electrical and/or mechanical skills.Maintain legible corporate and personal records of work history.Provides department support by processing job tickets, and work orders to the necessary department promptly.Provide support by picking up, delivering, and installing cases.Perform work on minor construction and remodeling projects including startups of new installations.Drives company vehicle in a safe manner.Performs other related duties and projects as assigned by management. Qualifications: High school diploma/GED.EPA certification.Certification from an accredited vocational-technical or trade school is a plus!Minimum 5+ years of commercial refrigeration experience required.Experience working on refrigeration equipment in convenience stores or supermarkets is a strong plus.Familiarity with single systems and rack systems along with previous work on display cases and walk-in boxes is very helpful.Must have a good driving record and be able to work independently.Emergency on-call availability is a basic requirement.Must be able to lift to 60 lbs. with no assistance and also be able to sit and/or stand for several hours at a time. Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

What this job involves: This role involves rotating weekly between two sites in Princeton, NJ, performing electrical maintenance, installation, and repair tasks in a pharmaceutical facility. The position requires expertise in industrial electrical systems, ability to read blueprints, troubleshoot equipment, and perform general maintenance duties.What your day-to-day will look like:Planning and executing electrical work involving installation, testing, maintenance, and repair of various electrical apparatus and control equipment.Interpreting blueprints, wiring diagrams, and schematic drawings to plan and organize work efficiently.Collaborating with clients and maintenance staff to determine optimal approaches for completing assignments safely and in compliance with environmental regulations.Installing electrical raceways, bus work, and performing necessary measurements, cutting, threading, and bending of conduit using appropriate tools.Troubleshooting and repairing faulty wiring, motors, and other electrical equipment.Diagnosing, maintaining, upgrading, and installing electrical/instrumentation equipment and systems in a large pharmaceutical facility.Anticipating potential issues and taking proactive measures to maintain facility structures and assets.Documenting all work performed and hours spent on tasks in the CMMS system.Performing associated tasks and collaborating with other trades as needed.Addressing general maintenance tasks, including plumbing issues and door repairs.Work Schedule: Monday through Friday, 7AM-3:30PMDesired or preferred experience and technical skills:CMMS Proficiency: Ability to document all tasks performed and hours spent using a computerized maintenance management system (CMMS).Collaboration: Strong collaboration skills to work effectively with clients and maintenance staff.Proactive Problem-Solving: Ability to anticipate potential issues and take pre-emptive action to maintain facility structures and assets.Experience in Pharmaceutical Facilities: Previous experience working in a pharmaceutical facility or similar environment.Instrumentation Skills: Experience in diagnosing, maintaining, upgrading, and installing instrumentation equipment and systems.Communication Skills: Strong verbal and written communication skills for effective documentation and interaction with team members.Required Skills and Experience:Electrical Expertise: Strong understanding of industrial electrical systems, including installation, maintenance, and repair of electrical apparatus and control equipment.Blueprint Interpretation: Ability to read and interpret blueprints, wiring diagrams, and schematic drawings.Troubleshooting Skills: Competence in diagnosing and repairing faulty electrical wiring, motors, and other equipment.Hands-On Experience: Experience with installing electrical raceways, bus work, and performing conduit measurements, cutting, threading, and bending.General Maintenance: Skills in performing general maintenance tasks, including plumbing and door repairs.Regulatory Compliance: Knowledge of and ability to adhere to environmental and safety regulations.#MMjobs#Ejobs

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Seeking a reliable Automotive Technician to join our outstanding fleet maintenance team. The Automotive Technician will be responsible formaintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel, gasoline, and alternative technologies such as compressed natural gas, liquefied natural gas, propane, hybrid, and electrical in some locations.Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls.Automotive Technicians must be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Automotive Technicians?must possess the required hand tools required to perform the applicable job assignment. ?Responsibilities and DutiesMeets D.O.T requirements required by job assignmentBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required,?throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsRequirementsMust have an active driver’s license issued by the stateMust be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Must possess the required hand toolsrequired to perform the applicable job assignment. ?Vermont Safe Inspection Certified.Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsClass A/Bor A Commercial Driver's License (CDL) - PreferredDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $39.25 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Schedule: Monday - Friday 8:00 AM - 6:00 PM, Occassional Satuday 6:00 AM - 2:00 PMInterstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, Connecticut, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety.What makes our company culture unique is we have mastered the ability to balance the standards of a large corporate company while maintaining our small business family style culture.Our Yellow Iron Diesel Technicians/Mechanics perform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, primarily including yellow iron machinery, diesel heavy trucks and engines. The Technician or Mechanic is not only responsible for understanding maintenance and breakdown needs and initiating/ assigning necessary repairs, but also must be able to operate the machinery being repaired. At times, the Technician may be on call and required to assist with emergency breakdowns. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Other minor duties may be assigned. Maintains advanced knowledge to diagnose and repair mechanical problems on heavy equipment (heavy equipment includes but not limited to: yellow iron machinery, tractor trailers, forklifts, and other diesel trucks)Performs repairs and assigned preventative maintenance services. Estimates time and material cost on vehicle repairs and requisition of new parts. Conduct safety checks on vehicles.Completes required paperwork utilizing fleet maintenance software program associated with repairing vehicles, documenting part usage, and accounting for repair time. Reviews, completes, or assigns repairs identified on Driver Vehicle Inspection Reports. Maintain a clean, safe work area in compliance with Company safety protocols and OSHA standards. This position will have no direct reports, however they will work in collaboration with the other yellow iron diesel mechanic on staff, although on different shifts.Assists Sr. Technicians in the completion of project work.Applicants must be at least 18 years of age and legally eligible to work in the United States. A valid driver’s license is required. CDL a plus. At least 5 years of experience in job duties. Sanitation or construction industry experience a plus.Computer diagnostic experience as diesel technician a plus.Experience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar. Working knowledge of applicable DOT and OSHA standards and regulations. Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records. Must be able to meet the physical and safety requirements of the position.Must be able to provide own toolsWork EnvironmentWe are continuously investing in equipment, and many of our trucks are less than 2 years old. Potentially hazardous work environment with many moving parts and machinery; must always be alert of surroundings.Only during breakdowns will this position be required to enter transfer station loading/ dumping area.Personal Protective Equipment (PPE) will be provided.The Yellow Iron Diesel Technician/Mechanic may be required to lift upwards to 50 pounds. Frequent squatting and standing are required. This job description is intended to be an accurate representation of the general functions of the job, rather than exhaustive list of duties, responsibilities, or experience. Other duties may be assigned, requested, or required. Aspects of the job may be altered without notice.Interstate Waste Services provides equal employment opportunities to all employees and applicants for employment andprohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.USD $25.00/Hr.USD $32.00/Hr.

Forbes List of America's Best Employers Move forward with us! At NJ TRANSIT, you'll join us in transforming the third-largest transportation agency in North America. We are committed to delivering safe, reliable service that gets our customers to their destinations on timeand we’re looking to hire talented folks with a love of learning to make it all possible. Under the direction of the Superintendent or Foreman, a Special Mechanic - Welder is responsible for repairingNJ TRANSIT buses for maintenance work and handle welding tasks. Main Functions: Conducts a variety of testing, repair, installation and maintenance tasks on equipment including engines, brake systems, suspension, steering, electronics, electrical systems, HVAC, transmission, and painting equipment, as well as: 1.Ability to understand and carry out written and verbal instructions and follow established policies and procedures. 2.Be able to diagnose and repair all electric I/O Controls and Multiplex Wiring Systems. 3.Have the ability to complete wiring conversion for buses with 12v, 24v, 110v and High voltage (EV buses). 4.Must have the mechanical ability. Be able to disassemble and reassemble complete electrical components. 5.Must have a working knowledge of reading electrical schematics. Be able to diagnose and repair electrical faults including wiring repair. 6.Be able to diagnose and repair electrical components on all computer-controlled engines and transmissions. 7.Must have the ability to trouble-shoot, analyze and implement effective solutions for operational faults on hybrid vehicle systems and components. 8.Be able to trouble-shoot and repair all electrical components. 9.Working knowledge of air conditioning and electrical systems. 10.Must be able to diagnose and program with a computer all engines, transmissions, and various other systems (i.e., HVAC etc.). 11.Demonstrate ability in the proper use of tools and diagnostic equipment. 12.Must be able to use and read parts manual and be able to fill out required forms. 13.Must be willing to work overtime when required. 14.Must keep area clean, uncluttered, and safe. Must follow established shop safety policies and procedures. Education and Experience Requirements: Must have a high school diploma or GED, ASE certification a plusMust have a CDL licenseMust have five years' experience in the welding field.Be able to pass the pre-employment physical and background checksMust be certified and able to supply copies of prior certifications and able to read blueprints, sketches, and drawingsMust be willing to work overtime when required At NJ TRANSIT, you will enjoy a competitive salary and excellent benefit package: Full benefit package including medical, prescription, dental & visionPension plan plus 457 tax-deferred savings planGrowth OpportunitiesPaid time off At NJ TRANSIT, we support and depend upon the diversity of our staff. NJ TRANSIT is an Equal Opportunity Employer. This position is deemed safety sensitive per the Department of Transportation (DOT) Drug and Alcohol Testing Regulations. The DOT Drug and Alcohol Testing Regulation 49 CFR Part 40 does not authorizethe use of marijuana for any reason. It is unacceptable for any safety-sensitive employee subject to drug testing under DOT regulations to use recreational or medical marijuana. The prohibitionincludes any derivative of marijuana such as CBD oils, teas, etc. The use of recreational and medical marijuana is a violation of NJ TRANSIT’s Drug and Alcohol-Free Workplace Policy for safety-sensitive employees. INDBU2

Overview: WHY COOLSYS At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. As a large company serving diverse customers, we invest in our team with:Competitive Compensation: Competitive pay from $45-$58 depending on experience.Ongoing Education & Training: Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting.Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more.JOB SUMMARYCoolSys Energy Solutions (CES) is currently seeking a CoGen Service Technician to inspect and diagnose on-site Power Generation and related equipment. Responsibilities: Must be thoroughly familiar and have detailed knowledge of all aspects of our product offerings including CHP and Balance of Plant (including not limited to HRSG, radiators, steam/hydronic boiler, absorption chiller, chiller, standby generators, automatic transfer switches, switchgear), island and parallel operation, Comap control system, Building Management Systems, all regarding assembly, repair, wiring, re-building, testing, and troubleshooting.Regularly travel to jobsite locations to perform preventive maintenance, corrective maintenance, unscheduled service, and troubleshooting, mechanical & electrical repairs on natural gas and biogas engines, generator sets, CHP power generation equipment, and related equipment.Monitoring system performance via remote control on-line, diagnoses technical malfunctions / operator errors, and provides solutions.Interface with system operators/field technicians and provides technical guidance.Performance of engine overhauls, electrical & mechanical testing, calibration and commissioning.Must provide clear and concise reports of all work performed daily for both internal and external reporting, observe and report conditions that could result in unscheduled or corrective maintenance, and communicate in a timely manner.Maintain designated project & service records, and practice consistent record keeping.Contribute to a pleasant and positive work atmosphere where all team members feel important and responsible.Adapt to the diverse needs of a small team and address internal and external requirements with flexibility and creativity.Regularly improve and update product knowledge by participating in educational and product training opportunities.This description contains information necessary to describe and evaluate the job. It should not be construed as a detailed description of all work performed but indicates the kinds of duties and skills expected.The position must complete other work tasks as assigned. Qualifications: The candidate must have a strong reciprocating engine and electrical background with the ability to display a high level of skill and understanding regarding internal combustion engines, generator sets, ideally natural gas engines, but will consider applicants that have experience with diesel standby or other engine technologies (e.g. compression engines).Will also consider technicians that have a more holistic background and excellent experience and trackrecord around complex technologies like aircraft engines and turbines.Be able to complete technical start-up of gas engines and CHP power systems.Independently diagnose and repair power systems.Basic working knowledge of advanced controls, safety shut-downs, circuit breakers and control panelwiring.Must be available to work over-time and occasionally travel on weekends.Must be able and willing to travel.Must be able to work independently.Excellent written and verbal communication skills and demonstratedproficiency composing writtencommunications.Outstanding interpersonal skills.Excellent telephone skills and computer knowledge.High energy level, comfortable performing multifaceted projects in conjunction with day-to-day activities.Resourceful, well organized, highly dependable, efficient and detail oriented.Must present a positive, professional, and team player attitude.Must be flexible and able to adapt to change quickly.Must possess a valid driver’s licenseExperience and knowledge of IP Networking including troubleshooting Join Us: Today, there are 26 different companies that make up the CoolSys family of brands.Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth!Connect with usonFacebookandTwitter.Coolsysis an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristicsare encouraged to apply. Pre-employment background screening (criminal andMVR for driving positions) anddrug testing are required for all positions.Coolsyswill consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance.Sr, senior, Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, supermarket, rack systems

Before you apply to a job, select your language preference from the options available at the top right of this page.Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow—people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level.Job Description:Seeking a reliable Mechanic Journeyman to join our outstanding fleet maintenance team. The Automotive Technician will be responsible formaintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel andgasoline. Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls.Automotive Technicians must be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Automotive Technicians?must possess the required hand tools required to perform the applicable job assignment. ?Responsibilities and DutiesMeets D.O.T requirements required by job assignmentBends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workdaySits infrequently, as required,?throughout duration of workdayExercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasksOperates standard and manual transmissionOperates power and pneumatic toolsRequirementsMust have an active driver’s license issued by the stateMust be willing to work 2nd?or 3rd?shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location’s need.??Must possess the required hand tools required to perform the applicable job assignment. ?Must have experience with trailers and tractors.Knowledge and SkillsCurrent documented automotive mechanical experienceExperience using diagnostic equipment, scan tools and personal computerPossesses full complement of personal hand toolsClass A/Bor A Commercial Driver's License (CDL) - PreferredDependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basisAvailable to work varying shifts, additional hours and/or overtime depending on service needsWears personal protective equipment as requiredWorks in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc.Works cooperatively in a diverse work environmentCommunicates effectively?through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditionsOur compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $39.25 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions.Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program.Employee Type:PermanentUPS is committed to providing a workplace free of discrimination, harassment, and retaliation.Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/nationalorigin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law.Basic Qualifications:Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

Fuel Your Career with Us!Are you a skilled Diesel Mechanic looking for your next opportunity Join our team at Interstate Waste Services and put your expertise to work!They pay for this position is $31.47/Hr.Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety.Requirements3+ years’ experience working as a heavy-duty Diesel MechanicHydraulics experience is highly preferredEngine and transmission maintenance and repairs Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar.Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components.Maintain and repair exhaust systems equipped with DPF systems.Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. Must be able to provide own tools.A valid driver’s license is required.Interstate Waste Services – IWS – is hiring aDiesel Mechanicfor our Goshen Transfer Station location. This is an opportunity to work hard, make good money, and grow asuccessful careeras a Diesel Mechanic.OurDiesel Mechanicsperform inspection, diagnosis, preventative maintenance, and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. This specific role with deal primarily with ourtractor trailer division. Utilizing diagnostic software, the Mechanic is responsible for interpreting failure modes and initiate or assign necessary repairs. At times, the Mechanic may be on call, and required to assist with emergency breakdowns.If you have experience or training as aDiesel Mechanic– apply now to join our team of dedicated, skilled tradesmen. We believe in providing the training and development you need to grow your career with IWS. Check out our YouTube channel to hear what our employees have to say about working with us.RequirementsApplicants must be at least 18 years of age and legally eligible to work in the United States.A valid driver’s license is required. CDL preferred.Experience working on heavy duty diesel equipment OR training from a recognized trade school is required.Must be able to speak and read English well enough to converse with colleagues, drivers and dispatch, and be able to make legible entries on reports and records.The Diesel Mechanic position may be required to lift up to 50 pounds. Frequent squatting and standing is required. Candidates must be able to meet the physical and safety requirements of the position.Must be able to provide own toolsother duties as assignedEntry-level candidates will be considered for this position and on-the-job training provided. Candidates with the following experience may be considered for a Mechanic B or A level position which has a higher level of responsibility as well a compensation:2+ years experience working as a heavy duty Diesel MechanicExperience with troubleshooting/repairing DPF systems diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, CAT, Peterbilt, and Paccar.Yellow Iron experience and/or experience as a Mechanic or Technician for a refuge company is a plus.Working knowledge of applicable DOT and OSHA standards and regulations.Other duties as assigned.IWS is committed to providing a world class work place to all employees. Each eligible employee receives a competitive total compensation package including, hourly pay based on experience and paid overtime, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Vacation, Holidays, and Personal Days.We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers.IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law.USD $31.37/Hr.USD $31.47/Hr.

Fuel Your Career with Us!Are you a skilled Diesel Mechanic looking for your next opportunity Join our team at Interstate Waste Services and put your expertise to work!Interstate Waste Services is the most progressive and innovative provider of solid waste and recycling services in the country! We primarily service Northern New Jersey, Southern New York State, New York City, with a landfill located in Ohio, where we also own and operate a state-of-the-art rail-served landfill. We cater to a diverse range of residential, industrial and commercial customers. Our mission has always been to provide our customers with the highest quality waste, recycling and environmental services, while keeping focus on employee, customer and environmental safety.Our Diesel Mechanics perform inspection, diagnosis and repair of electrical, hydraulic, suspension, brake and air systems on vehicles and equipment, including diesel heavy trucks and engines. Performs preventive maintenance inspection (PMI); troubleshoots, repairs, and rebuilds major components on vehicles and equipment. Ensures accurate diagnosis and effective repair and/or replacement of component.Overnight Monday- Friday 7pm to 5amDurante la noche Lunes- Viernes de 7pm a 5amRequirements2+ years’ experience working as a heavy-duty Diesel MechanicHydraulics experience is highly preferredEngine and transmission maintenance and repairs Experience with diagnostic software such as Premium Tech Tool (Mack), Allison transmission, Cummins, Peterbilt, and Paccar.Chassis component repairs and maintenance including air brakes system, suspension, drivetrain and steering components.Maintain and repair exhaust systems equipped with DPF systems.Maintain a clean, safe work area in compliance with Corporate / OSHA Standards. Must be able to provide own tools.A valid driver’s license is required.Assists with service calls for breakdownsPreform other duties as assigned.What We Offer Competitive wage (based on experience) plus Time and a half for Overtime.11 National Holidays.Union Shop.Medical, dental, vision, life, short-term and long-term disability coverage.401(k) IWS is committed to providing a world class workplace to all employees. Each eligible employee receives a competitive total compensation package including, hourly pay based on experience and paid overtime, Medical, Dental, Vision, Life Insurance and more. Our employees also receive Paid Vacation, Holidays, and Personal Days.We believe in providing the training and development you need to grow your career with IWS. Many of our Supervisors, Managers, and other leadership staff, started their careers as Helpers, Drivers, or Dispatchers. IWS is proud to be an equal opportunity employer. We celebrate diversity and do not discriminate based on race, religion, color, national origin, sex, sexual orientation, age, veteran status, disability status, or any other applicable characteristics protected by law.USD $25.00/Hr.USD $50.00/Hr.