Interested in making a positive impact You’ve come to the right place. At Fusion Medical Staffing, our goal is to improve the lives of everyone we touch, and we’re always looking for people like you to join our mission.And making a difference isn’t the only perk of traveling with us. Start your medical travel career with Fusion Medical Staffing and gain access to competitive pay packages, comprehensive benefits, corporate discounts and perks, a clinical team to support you along your journey, and a recruiter determined to help you succeed. We’ve got your back so you can focus on what you do best: helping others._______________________________________________________Physicist - Radiation Oncology Position: Physicist Specialty: Radiation Oncology 13 week Radiation Oncology Physicist travel assignment Client in Boston, MA is looking for a Radiation Oncology Physicist to help them out for 13 weeks. At Fusion Medical, we truly believe that as people taking care of people, together we can do anything. Benefits Include: Paid Time Off (PTO) after 1560 hours Highly competitive pay Best in the industry Medical, Dental, and Vision Short term disability 401(k) Aggressive Refer-a-friend Bonus Program Your recruiter is available 24-7 Reimbursement for licensure and CEU’s Qualifications/Requirements: One to three years experience as a Physicist preferred Other certifications may be required for this position Critical thinking, service excellence and good interpersonal communication skills, ability to read/comprehend written instructions, ability to follow verbal instructions, PC skills Physical Abilities: Remain in a stationary position, move about, move equipment (50-100lbs), pushing, pulling, bending. The following is a summary of the major job duties of this job. Other duties may be performed, both major and minor, which are not mentioned below. Specific activities may change from time to time. Communicates and collaborates with physicians and other health team members. Provides and coordinates patient care with other health team members. Monitors patients' responses to interventions and reports outcomes. Administers medications as ordered with appropriate documentation. Monitor and evaluates patients before, during, and post procedure depending on unit. Shares on-call responsibilities with a 30-minute response time if required. Maintains cleanliness of rooms and adequate stock of supplies. Transports patients as needed. Performs other duties as assigned. Required Essential Skills: Interpersonal Skills - to work effectively with a variety of personnel (professional and ancillary) to present a positive attitude and a professional appearance. Technical/Motor Skills - Ability to grasp, fine manipulation, pushing/pulling and able to move about when assisting with procedures and/or using department equipment. Mental Requirements - Must be able to cope with frequent contact with the general public, customers, and meeting deadlines under pressure. Must be able to work under close supervision occasionally as well as working without assistance from other personnel. Must be able to contend with irregular activity schedules occasionally and continuous concentration to detail. Sensory - Visual acuity, ability to effectively communicate **Fusion is an EOE/E-Verify Employer #pb26**

FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Markem-Imaje is a trusted world manufacturer of product identification and traceability solutions, offering a full line of reliable and innovative inkjets, thermal transfer, laser, print and apply label systems. Markem-Imaje delivers fully integrated solutions that enable product quality and safety, regulatory and retailer compliance, better product recalls and improved manufacturing processes.Dover is a diversified global manufacturer with annual revenue of over $8 billion. We deliver innovative equipment and components, specialty systems, consumable supplies, software and digital solutions, and support services through five operating segments: Engineered Products, Fueling Solutions, Imaging & Identification, Pumps & Process Solutions and Refrigeration & Food Equipment.Headquartered in Downers Grove, Illinois, Dover trades on the New York Stock Exchange under "DOV." Additional information is available at dovercorporation.com.The Role:Working in a team-oriented workplace, Electrical Engineer IV will effectively apply electronic skills to perform activities concerned with analysis, design, testing/troubleshooting and manufacturing of products/systems including the application of these products/systems to commercial, industrial and scientific uses. As required by the business, works closely with other engineering disciplines in the development and application of products/systems or services.Job Responsibilities:• An excellent understanding of the Customer’s requirements, expectations, and application environment as it relates to product/system performance is required.• Execution of Customer requirements/expectations into product variations/enhancements or a new product idea is expected.• Collaboration and teamwork with other functional departments such as Reliability, Value Stream, Manufacturing Engineering, Test Engineering, GPS, Tech Service, Depot Centers, Sourcing, Business Centers, Product Management, etc., is required to ensure product/system performance objectives are met.• Timely resolution of product/system issues that affect MI’s internal and external Customers, which may involve engineering research, redesign, test & validation, documentation and communication is expected.• Responsible for all phases of product development including the specification, design, component selection, implementation, verification and validation of products and services. May provide technical leadership to a small group of assigned engineers and technicians.• Principle responsibility/ownership in the development of new electronic circuits or systems.• Proficient in the use of computer-assisted engineering and design software/equipment such as ECAD to perform assignments which include schematic capture and circuit simulation.• Recommend complex components, architectural systems and equipment based on analysis of specifications and reliability. May also review vendor capability and make recommendations to support product development.• Determine, plan and execute design approaches and parameters through the research, assimilation and application of new technology, utilizing creative problem-solving skills such as DOE/FMEA in order to develop new electrical analysis methods.• Remain current with a variety of the field's concepts, practices, and procedures.• Principle responsibility/ownership towards the continuous improvement efforts within the R&D community.• Perform, guide or lead complex electrical design functions associated with new product development. Comfortable working with and/or directing the mechanical, chemical, and electromechanical aspects of project.• Collaborate with and direct other engineers/peers in the acquisition, analysis and verification of electrical performance to specification through simulation and measurement. (E.g. power factors, electronic architecture timing, I/O, User Interface, communication ports, etc.).• Ensure successful completion of the assigned project/task within the budgeted time and cost constraints.• Participate in key account relationships involving requirements definitions, special applications/designs, and validation through field testing.• Work closely with local business/technical centers, sales and service representatives in order to generate revenue generation opportunities.• Identify new and/or works with existing suppliers and subcontractors on specifications, designs, schedules, etc. in the support of projects and production equipment. Coordinate key account relationships involving requirements definitions, special applications/designs, and validation through field testing.• Coordinate, lead and/or participate in design review meetings and associated activities.• Actively participates in the annual business planning sessions related to Electrical R&D.• Maintain laboratory notebooks in accordance with requirements of research/ design/development process.• Travel and/or interfacing with Customers, Business Centers is expected and encouraged.• Perform other related duties as assigned by management.Job Requirements:• Master’s Degree with a minimum of 8 years of experience in a related field or a Bachelor’s Degree with 10 years of experience.• On-going, advanced coursework in Electrical/Electronic Engineering required.• 10+ years of experience developing PCBAs.• Demonstrated ability to design and enter schematics (Altium a plus) and a superior knowledge and experience of digital, embedded CPU and analog circuits.• FPGA and/or C programming skills a plus.• The candidate should be able to develop their assignments will minimal direction as well as functional as part of a cross-functional and international product development team.• Mentoring and leadership of less experienced personnel in an agile environment.• Expertise in more than one of the following is required: system design, analog and digital circuit design, solid state power electronics and power conversion, microprocessor and digital signal processor, software, local area networks, wireless communications, data logging, and electromechanical devices.• Complex analog and digital design capability that includes expertise with low- and high-density integrated circuits, microprocessors/microcontrollers, motor controllers, display drivers, communication drivers, input/output devices, power supply circuits/conditioning, wiring diagrams and cable management. Experience with architectural design/manufacturing that includes VHDL, FPGA, CPLD, BGA and SMT.• Expertise with PCB design, testing, analysis and validation required.• Expertise with EMI/EMC design, testing techniques and Agency certification practices required.• Programming knowledge of C++ is preferred.• Proven track record of success for designing, implementing and manufacturing reliable product designs.• Expert use of test equipment/apparatus, computer-assisted engineering and design software, circuit board processes, etc.• Expertise with the use of ECAD for schematic capture and circuit simulation, oscilloscopes, DMM’s, logic/spectrum analyzers, signal generators and data logging equipment.• Expertise utilizing Design of Experiments (DOE) methodology is required.• Proficient knowledge of common software programs, including Word and Excel.• Strong leadership, Customer, interpersonal communication and mentoring skills a must.• Demonstrated aptitude in Engineering Excellence: FMEA, DFT, DFM, Root Cause Analysis, Design of Experiments, etc.The right candidate will be aligned to our values and culture: • Collaborative entrepreneurial spirit • Winning through customers • High ethical standards, openness and trust • Expectations for results • Respect and value peopleIf you believe you match our values and have the experience we’re looking for, apply! We can’t wait to hear from you!Work Arrangement: Onsite Salary Range: $150,000.00 - $170,000.00 We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.All qualified applicants will receive consideration for employment without discrimination based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.Attention Applicants: If you are an individual with a disability and require reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact for assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response.Job Function:

Job Description:The RoleWe are seeking a highly qualified and passionate Director of Engineering/Technical Lead to oversee the development and launch of our next-generation AI SaaS products. The successful candidate will have a deep passion for artificial intelligence, innovative cloud technologies, and the creation of high-impact solutions that address both business and user needs. Your responsibilities will span across technical strategy development, working with partners and customers, capability implementation, leading and working alongside the development team, and delivering value to our users, partners, and customers.You will be a Tech Lead in a cross-functional team of data scientists, developers, designers, analysts, and product managers to launch and scale our FCAT products to both internal and external users. As part of our dynamic technology team, you will play a pivotal role in defining the strategic technical direction of our core SaaS products.Lead the development and maintenance of scalable AI SaaS applications.Establish standards and ensure alignment with existing technology roadmaps.Remove barriers to deliver value and drive progress.Work with the team to enhance application scalability, stability, and resilience.Design, develop, and modify complex SaaS systems.Collaborate with Product Leaders and Architects to establish non-functional requirements for scale and performance.Define an end-to-end performance testing strategy and address test data needs for scalability.Explore and drive implementation of machine learning and AI advancements to improve application development and solve business/user needs.The Expertise and Skills You Bring Bachelor's Degree in Computer Science or related field required.Proven experience as a hands-on technical leader delivering SaaS products.Expertise in Python and full-stack development.Experience building scalable systems with a strong understanding of distributed systems, microservices, event-based services, data pipelines, and orchestration.Proficiency in object-oriented programming (OOP) and design patterns.Experience with various database technologies: SQL (Oracle & Snowflake), NoSQL, Graph, Vector.Experience working with AWS and infrastructure-as-code (CloudFormation).Experience implementing CI/CD and DevOps best practices.Proficiency in containerization with Kubernetes and Docker.Able to explain complex system concepts to non-technical audiences.Experience leading technology teams for AI and cloud products.Experience working with modern transactional and data processing applicationExperience developing AI-powered applications.Experience building/testing secure, high-volume complex applications using Java, Oracle, Web Services, Angular, XML/JSON, and SQL.Experience designing IT architecture and facilitating change reviews, release management, and infrastructure change schedules.Knowledge of security concepts, such as SSL/TLS, OAuth, encryption.Willingness to partner effectively with technology & business partners.Successful delivery of key technology efforts in support of our business strategy.Partnership with application developers to ensure technology solutions align with our long-term architecture and application strategies.Defining standards for application and infrastructure design, engineering, and development.Mentoring and developing more junior technical staff.Providing knowledge and experience through insights and great ideas.The Team Be part of a multi-functional FCAT team working to conceptualize, create, test, and deploy innovative Data products using the latest cloud technologies. Discover, transform, and contribute to data originating from diverse sources such as social media, trading systems, historical data stores etc.As the innovation engine for Fidelity Investments, we prototype and pilot new businesses and capabilities that continue to distinguish our brand as the best customer experience in the financial services industry. See what we’re up to at fcatalyst.com. Certifications:Category:Information TechnologyFidelity’s hybrid working model blends the best of both onsite and offsite work experiences. Working onsite is important for our business strategy and our culture. We also value the benefits that working offsite offers associates. Most hybrid roles require associates to work onsite every other week (all business days, M-F) in a Fidelity office.

Medical Physicist - Radiology If you are passionate about advancing diagnostic imaging and radiation therapy, join us as a Medical Physicist. In this role, you will apply your expertise in physics to ensure the safe and effective use of radiation technologies in medical diagnosis and treatment. Key Responsibilities: Collaborate with radiologists and healthcare teams to optimize imaging techniques and radiation therapy plans for patients.Ensure that radiation doses are accurate, safe, and compliant with regulatory standards.Perform quality assurance tests on imaging equipment such as X-rays, CT scanners, and MRIs to maintain optimal performance.Develop protocols for radiation safety and provide training to staff on best practices for minimizing exposure risks.Conduct research to improve imaging technologies or develop new diagnostic tools. Work Environment: The role is based in hospitals, cancer treatment centers, or academic institutions equipped with advanced radiology technology.This position requires strong analytical skills and attention to detail in a high-stakes environment focused on patient safety. Benefits: A competitive salary with opportunities for career growth within medical physics specialties.A comprehensive benefits package including health insurance, retirement savings plans, and paid time off.Support for continuing education programs to maintain certifications and expand expertise in medical physics applications. Equal Opportunity Employer: Your expertise in radiation safety and diagnostic imaging is valued here. We strive to create an inclusive environment where all employees can thrive professionally while contributing meaningfully to patient care excellence. *This information is based on the Bureau of Labor Statistics (BLS). Actual job responsibilities may vary by location.*

Overview: GovCIO is currently hiring for a Journeyman Unified Communications Deployment Engineer to provide telecommunications support to their local area, and travel around the US for unified communications deployment activities. This position is primarily located in Boston, MA and is an onsite position. Responsibilities: Performs a variety of electronic and technical assignments on data, telecom, and audiovisual communications equipment and systems. Completes endpoint troubleshooting using appropriate diagnostic equipment. Installs terminals, controllers, and test equipment and restores nonworking lines and/or equipment to working condition. Maintains liaison with outside vendors and orders circuits and/or equipment as required. Requires knowledge of specific hardware, test equipment, and terminal configuration. May develop recommendations for the combined usage of data processing and telephone system hardware and software.Conducts site surveys and meets contacts like clients, construction crew members, utility company personnel, and people from other departments within the Company.Installs, moves, commissions, and modifies audiovisual, telecommunications and related equipment according to job order specifications, standards, and procedures.Undertakes systems upgrades and answers queries related to system controls, and maintenance of the systems in general.Diagnoses equipment malfunctions. Maintains and repairs systems and equipment according to manufacturer recommendations and specifications.Reports and monitors service order changes.Be responsible for general local video operations and maintenance support as part of normal IT site support duties. This task does not include designing, engineering, specifying or acquiring video equipment. This support shall include basic troubleshooting of system problems and repairs, when they are identified by enterprise video support staff.Work with enterprise level voice and video engineers and technicians to conduct more detailed remote troubleshooting and repairs.Assist in setting up presentation devices and Video Conference units and provide basic troubleshooting support as needed. This includes ensuring functionality, being available for events, and shutting down video conferences.Perform local voice operations and maintenance support related to videoteleconferences. This support shall include basic troubleshooting of system problems and repairs whenthey are indicated by enterprise voice support staff. This task does not include designing, engineering,specifying or acquiring voice communications equipment.Provide on-call support by identifying, researching, and resolving technical problems received via the ServiceNow ticketing system.Interact with network services, software systems engineering, and/or applications development to restore service and/or identify and correct core problems. Perform routine system maintenance and analysis functions, including hardware configurations and adding, removing and replacing equipment components.Below is a non-comprehensive list of technologies that the technician may encounter. The ideal candidate will understand the purpose of these technologies and have some experience with them, or with equivalent technologies:Cisco IP audio and video endpoints, Unified Call Manager (CUCM), Expressway Meeting Server (CMS), Meeting Management (CMM), Telepresence Management Suite (TMS), Prime, and Identify Services Engine.Broadsoft CloudMicrosoft System Center Configuration Manager (SCCM)Avaya technologies including audio/video components, Communicator, One-X, Application Enablement Server (AES), and the following at version 6.0 or above: Communications Manager, Session/System Manager, and Aura Messaging.Polycom DMA, Real Presence, and endpointsSolarwindsSplunk (syslog)CyberArkICAM / Single Sign On methodologies (SSO) / CertificatesInfoBlox / AkamaiSIP routing, dial pattern and number translations, E.164 routing, PRI as well as standards-based codecs, to include codecs from Cisco and PolycomVideo Conferencing Services (VCS) infrastructureUnified Communications and Video conferencing, including but not limited to: Cisco Unified Communications Manager, Unity Connection, TEAMS, UCCX, Expressways, Jabber Client, SIP, H.323, and QoSSession Border Controllers (SBC), Cisco Unified Border Elements (CUBEs) Qualifications: High School with 0-3 years (or commensurate experience)Clearance Required: Must be able to obtain and hold a Public Trust ClearanceRequired Skills and ExperienceUSCitizenHigh degree of technical proficiencyExcellent problem-solving skills and analytical abilitiesMust be prepared for regional travel up to 25% at customer locations.#NSS#NEON#DL Company Overview: GovCIO is a team of transformers--people who are passionate about transforming government IT. Every day, we make a positive impact by delivering innovative IT services and solutions that improve how government agencies operate and serve our citizens.But we can't do it alone. We need great people to help us do great things - for our customers, our culture, and our ability to attract other great people. We are changing the face of government IT and building a workforce that fuels this mission. Are you ready to be a transformer We are an Equal Opportunity Employer.All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender, gender identity or expression, sexual orientation, national origin, disability, or status as a protected veteran. EOE, including disability/vets. Posted Pay RangeThe posted pay range, if referenced, reflects the range expected for this position at the commencement of employment, however, base pay offered may vary depending on multiple individualized factors, including market location, job-related knowledge, skills, education, experience, and internal equity. The total compensation package for this position may also include other compensation elements, to be discussed during the hiring process. If hired, employee will be in an “at-will position” and the GovCIO reserves the right to modify base salary (as well as any other discretionary payment or compensation program) at any time, including for reasons related to individual performance, GovCIO or individual department/team performance, and market factors. Posted Salary Range: USD $70,000.00 - USD $70,000.00 /Yr.

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationManage assigned projects to an on-time and on-budget completion to include new and takeover club locations; remodels and expansions; and new club gas facilities. This position is responsible for assisting and coordinating with real estate directors for the hiring of Consultant teams; representing the companies interests in public meetings and hearings; facilitating complete project approvals from State, Federal and local municipalities; the development of construction documentation that is in accordance with the company prototype, budget and schedule; on all assigned new club developments. Project involvement will range from Landlord reverse build-to-suits to full self-develop owned projects which may include surplus property for other retail uses. This position is to maintain a current schedule and budget update on all assigned projects and report same to real estate directors on an as needed basis.Utilize existing criteria for RFP's and solicit quotes for Consultant's scope of work with assistance from the real estate directors. Support real estate directors in developing conceptual site plans and establishing projectCoordinate efforts with the real estate directors of the project team through the conceptual design and due diligence phase of the project in order to establish the development feasibility, preliminary construction budgets and schedules. Support the Real Estate Directors negotiations by providing information/documentation necessary to complete the project. Assist and coordinate the development of approval and construction documents. Work with the project team to insure compliance with the project parameters, budget and schedule. Insure the accuracy and timeliness of document development. Attend working sessions and public hearings with state and local municipality staff to review projects and prepare for public hearings. Coordinate with the project team and insure that permits are issued; fees are filed; bonds are procured; and agencies are notified in advance of constructionSchedule and arrange project meetings with Consultants, Attorneys and BJ'sAdminister contract invoicing, amendments, change orders and close out documentation for allDevelop an entitlement timeline with the team to be incorporated into the overall project schedule. Coordinate the development of construction documents for the building, civil, off-site and gas in order to maintain the approved schedule for permitting and construction. Report the progress of project approvals in order to maintain an updated project schedule that management can rely on for scheduling club openings and events. Qualifications:Bachelor’s Degree in civil engineering required, 2 to 3 years’ experience in field. Retail Corporate or Civil Engineering Design firm experience a plus. General knowledge of land use planning/civil engineering principles and with Regulatory Agency/Municipal approval process. Familiarity with retail site design with understanding of soils, drainage, environmental and other related activities. Awareness of legal and environmental issues related to land. In accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is starting from $80,000.00

ESSENTIAL DUTIES and RESPONSABLITIES includes but not limited to the following.Performing the installation, maintenance, repair and operation of mechanical, electrical and power generation equipment and systems to support the critical environment of our Lab/office buildings.Operates systems in a safe and efficient manner in accordance with government regulatory compliance and standard operating procedures.Ability to quickly learn building control, electrical and UPS systems, utilizing on the job training, operations manuals and documentation.Performs predictive, planned, preventative and routine maintenance as well as equipment rounds and service requests as directed. Performs maintenance in accordance with the JLL Preventative Maintenance Program. Assist with the development and improvement of preventative maintenance programs, schedules, work instructions, SOP ’s and operational procedures.Inspects and repairs pumps, fans, valves, and motors ensuring proper operation of the client equipment and systems. Performs all duties in a safe manner and in accordance with established work standards and practices.Performs visual and operational inspection of associated equipment and interprets specifications, blueprints and job standards to perform assigned duties.Establishes work procedures to meet production schedules.Recommends measures to improve production methods, equipment performance and quality of product, suggesting changes in working conditions and use of equipment to increase efficiency of department, shop, or work crew.Determines and/or assists with analyzing and resolving work problems and achieving work goals Maintains time and production records and customer service requests. .Must be comfortable and flexible enough to work with a wide-ranging and changing scope of responsibilities while adhering to the constraints of procedures put in place to minimize the risk for human error.Team player with the desire to foster teamwork to help create a positive working environment. Control the daily operation of all mechanical equipment in the physical plant and buildingsPerform maintenance and repairs to the Mechanical, Plumbing, Structural, Furniture, Fire, Life Safety, and Control systems for the facility to keep these systems up to applicable standardsMonitor Maintains responsibility for tenant services, preventative maintenance, purchasing and inventory control, contracted maintenance, general maintenance and technical proficiencyMonitoring operation and maintaining refrigeration, water cooling and air conditioning equipment, boilers, heating, ventilating and hot water equipment, pumps, valves, piping and filters, other mechanical and electrical equipmentPerforms and/or completes all tenant service requests accurately and expediently.Be able to evaluate building systems to monitor and to improve performance to operate efficiently.Complies with all policies and procedures established for the building, including safe storage, usage, and disposal of hazardous materials while maintaining a clean and safe workplacePeriodically acts as the on-call engineer for the portfolio of office buildings.Actively participates in emergency response procedures, technical and safety training programs. Perform all work using the proper safety equipment and in a safe manner.QUALIFICATIONS – To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.EDUCATION/EXPERIENCE– A high school diploma or GED is required. A minimum four (4) years experience in the building maintenance industry and accredited trade school degree in HVAC, electronic, or other industry related trade. Union training and certification is also acceptable. Must have Universal CFC certification. Should be knowledgeable in the safe and proper use of the following tools: ladders, lifts, basic hand tools, volt meter, manual drain auger, plumbers helper, safety goggles, ear protection, and fire extinguisher.LANGUAGE SKILLS- Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Have the ability to write routine reports and correspondence.MATHEMATICAL SKILLS- Ability to calculate figures and amounts such as load balancing, proportions, percentages, area, circumference, and volume. Have the ability to apply concepts of basic algebra and geometry.REASONING ABILITY- Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Have the ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule format.PHYSICAL DEMANDS- Physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Theemployee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds.WORK ENVIRONMENT- The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock, moving mechanical parts and heights up to 30 feet. The employee is occasionally exposed to wet and/or humid conditions as well as very cold and uncomfortable heat while inside and out of the facility. The noise level in the work environment is at times moderately loud.#PMR1

Markem-Imaje, A Dover Company, is a trusted world manufacturer of product identification and traceability solutions, offering a full line of reliable and innovative inkjet, thermal transfer, laser, print and apply label systems. Markem-Imaje delivers fully integrated solutions that enable product quality and safety, regulatory and retailer compliance, better product recalls and improved manufacturing processes.Dover Corporation® (NYSE: DOV). Dover is a diversified global manufacturer and solutions provider with annual revenue of approximately $8 billion.The Role:The role of the embedded software engineer is to design, implement, validate, and maintain the embedded software for Markem-Imaje current and future products across a variety of printing/marking technologies and application spaces using industry standard best practices. This role requires the ability to work on problems of moderate scope, follow Markem-Imaje standard practices and procedures, and work both as an individual contributor and as part of a team taking direction from senior team members.Job Responsibilities:• Design, implement, and validate high quality embedded software using established standards as part of an Agile team of engineers• Contribute ideas for best practices and tools to improve team efficiency, effectiveness, and software quality.• Conduct design and code reviews, participate in design and code review, providing feedback to other developers.• Accept and act upon constructive feedback from fellow developers.• Stay up to date with the latest industry standards and advocate for continuous improvement in the areas of unit testing, system testing, automation, code analysis, source control, continuous integration, etc.• Contribute high-level and detailed software estimation to support planning activities.• Complete high-level well-defined tasks independently.• Collaborate effectively with remote team members and external partners.• Create advanced unit tests with minimal guidance from senior engineers.• Create automated system tests and perform exploration testing.• Develop a comprehensive understanding of the technical workings of various Markem-Imaje printing technologies.• Travel: Up to 15%, including international trips• Mix of office and laboratory environmentJob Requirements:• Bachelor’s or master’s degree in computer science, Computer Engineering, or Software Engineering• Minimum 2-5 years of professional experience developing software• Demonstrable record of developing high-quality embedded software for end-user products.• Ongoing, advanced coursework and/or research to stay current preferable.• Experience with Agile/Scrum development practices.• Experience developing embedded software in an industrial printing domain is a plus.Knowledge & Skills:• Basic design skills such as functional decomposition, UML, and design patterns.• Experience writing C and C++ code. Demonstrate the ability to use simple C and C++ constructs.• Experience with scripting languages such as python, perl, etc.• Solid understanding of object-oriented programming, pair programming, memory management, distributed systems programming, multi-threaded programming, and on-target debugging with application development on Linux OS.• Understanding and knowledge of test-driven development, unit testing, code reviews, and defect characterization.• Basic understanding of requirements analysis.• Knowledge of FreeRTOS and/or Yocto Linux• Familiarity with configuration management skills such as revision control, continuous integration and deployment, automated build systems, release management, and technical documentation.• General knowledge of real time operating system concepts and some experience in their use.• Basic knowledge of electronics including micro-controllers, memory, and peripherals as well as in reading schematics and basic use of oscilloscopes/logic analyzers.• Knowledge and experience with the following tools are a plus: GCC, Visual Studio, Eclipse, JSON, XML, Python, Bamboo, SCONS, FitNesse, Lauterbach debuggers.• Ability to work within a fast-paced agile software team.• Ability to quickly learn new concepts and software.• Excellent interpersonal, written, and oral communication skills.Behaviors:• Self-motivated, independent, detail oriented, and responsible in a collaborative team.• Able to follow instructions.• Able to practice and promote organizational values of integrity, innovation, respect, and reliability.• Willing to communicate openly and directly.• Strong discipline in all conducted activities.The right candidate will be aligned to our values and culture: • Collaborative entrepreneurial spirit • Winning through customers • High ethical standards, openness, and trust • Expectations for results • Respect and value peopleIf you believe you match our values and have the experience we’re looking for, apply! We can’t wait to hear from you!Work Arrangement: Onsite Salary Range: $87,000.00 - $131,000.00 We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.All qualified applicants will receive consideration for employment without discrimination based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact for assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response.Job Function :

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday