FUELING OUR AIRCRAFT FOR FLIGHTThere is little to no room for error during flight, especially when it comes to the fuel system. Responsible for diagnosing and repairing fuel system malfunctions, Aircraft Fuel Systems specialists correct problems before planes are airborne. By completing comprehensive checks on these complex systems, these highly trained specialists ensure that fuel systems won’t malfunction during flight.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationYou must be 17–42 years of age, a U.S. citizen and obtain a qualifying ASVAB score. *High School Students may start their application as early as the end of their junior year. Applicants who are non-graduates or non-alternate credential holders must obtain an AFQT Test score of 65 or higher on the ASVAB. ASVAB Score Requirements47 Mechanical (M)QualificationsKnowledge of internal hardware such as valves, lines, gauges and controlsCompletion of appropriate Aircraft Fuel Systems coursesNormal color visionCompletion of 7.5 weeks of Basic Military TrainingMust be at least 17, but has not reached age 42 on the date of enlistment

Markem-Imaje is a trusted world manufacturer of product identification and traceability solutions, offering a full line of reliable and innovative inkjets, thermal transfer, laser, print and apply label systems. Markem-Imaje delivers fully integrated solutions that enable product quality and safety, regulatory and retailer compliance, better product recalls and improved manufacturing processes.Dover is a diversified global manufacturer with annual revenue of over $8 billion. We deliver innovative equipment and components, specialty systems, consumable supplies, software and digital solutions, and support services through five operating segments: Engineered Products, Fueling Solutions, Imaging & Identification, Pumps & Process Solutions and Refrigeration & Food Equipment.Headquartered in Downers Grove, Illinois, Dover trades on the New York Stock Exchange under "DOV." Additional information is available at dovercorporation.com.The Role:Working in a team-oriented workplace, Electrical Engineer IV will effectively apply electronic skills to perform activities concerned with analysis, design, testing/troubleshooting and manufacturing of products/systems including the application of these products/systems to commercial, industrial and scientific uses. As required by the business, works closely with other engineering disciplines in the development and application of products/systems or services.Job Responsibilities:• An excellent understanding of the Customer’s requirements, expectations, and application environment as it relates to product/system performance is required.• Execution of Customer requirements/expectations into product variations/enhancements or a new product idea is expected.• Collaboration and teamwork with other functional departments such as Reliability, Value Stream, Manufacturing Engineering, Test Engineering, GPS, Tech Service, Depot Centers, Sourcing, Business Centers, Product Management, etc., is required to ensure product/system performance objectives are met.• Timely resolution of product/system issues that affect MI’s internal and external Customers, which may involve engineering research, redesign, test & validation, documentation and communication is expected.• Responsible for all phases of product development including the specification, design, component selection, implementation, verification and validation of products and services. May provide technical leadership to a small group of assigned engineers and technicians.• Principle responsibility/ownership in the development of new electronic circuits or systems.• Proficient in the use of computer-assisted engineering and design software/equipment such as ECAD to perform assignments which include schematic capture and circuit simulation.• Recommend complex components, architectural systems and equipment based on analysis of specifications and reliability. May also review vendor capability and make recommendations to support product development.• Determine, plan and execute design approaches and parameters through the research, assimilation and application of new technology, utilizing creative problem-solving skills such as DOE/FMEA in order to develop new electrical analysis methods.• Remain current with a variety of the field's concepts, practices, and procedures.• Principle responsibility/ownership towards the continuous improvement efforts within the R&D community.• Perform, guide or lead complex electrical design functions associated with new product development. Comfortable working with and/or directing the mechanical, chemical, and electromechanical aspects of project.• Collaborate with and direct other engineers/peers in the acquisition, analysis and verification of electrical performance to specification through simulation and measurement. (E.g. power factors, electronic architecture timing, I/O, User Interface, communication ports, etc.).• Ensure successful completion of the assigned project/task within the budgeted time and cost constraints.• Participate in key account relationships involving requirements definitions, special applications/designs, and validation through field testing.• Work closely with local business/technical centers, sales and service representatives in order to generate revenue generation opportunities.• Identify new and/or works with existing suppliers and subcontractors on specifications, designs, schedules, etc. in the support of projects and production equipment. Coordinate key account relationships involving requirements definitions, special applications/designs, and validation through field testing.• Coordinate, lead and/or participate in design review meetings and associated activities.• Actively participates in the annual business planning sessions related to Electrical R&D.• Maintain laboratory notebooks in accordance with requirements of research/ design/development process.• Travel and/or interfacing with Customers, Business Centers is expected and encouraged.• Perform other related duties as assigned by management.Job Requirements:• Master’s Degree with a minimum of 8 years of experience in a related field or a Bachelor’s Degree with 10 years of experience.• On-going, advanced coursework in Electrical/Electronic Engineering required.• 10+ years of experience developing PCBAs.• Demonstrated ability to design and enter schematics (Altium a plus) and a superior knowledge and experience of digital, embedded CPU and analog circuits.• FPGA and/or C programming skills a plus.• The candidate should be able to develop their assignments will minimal direction as well as functional as part of a cross-functional and international product development team.• Mentoring and leadership of less experienced personnel in an agile environment.• Expertise in more than one of the following is required: system design, analog and digital circuit design, solid state power electronics and power conversion, microprocessor and digital signal processor, software, local area networks, wireless communications, data logging, and electromechanical devices.• Complex analog and digital design capability that includes expertise with low- and high-density integrated circuits, microprocessors/microcontrollers, motor controllers, display drivers, communication drivers, input/output devices, power supply circuits/conditioning, wiring diagrams and cable management. Experience with architectural design/manufacturing that includes VHDL, FPGA, CPLD, BGA and SMT.• Expertise with PCB design, testing, analysis and validation required.• Expertise with EMI/EMC design, testing techniques and Agency certification practices required.• Programming knowledge of C++ is preferred.• Proven track record of success for designing, implementing and manufacturing reliable product designs.• Expert use of test equipment/apparatus, computer-assisted engineering and design software, circuit board processes, etc.• Expertise with the use of ECAD for schematic capture and circuit simulation, oscilloscopes, DMM’s, logic/spectrum analyzers, signal generators and data logging equipment.• Expertise utilizing Design of Experiments (DOE) methodology is required.• Proficient knowledge of common software programs, including Word and Excel.• Strong leadership, Customer, interpersonal communication and mentoring skills a must.• Demonstrated aptitude in Engineering Excellence: FMEA, DFT, DFM, Root Cause Analysis, Design of Experiments, etc.The right candidate will be aligned to our values and culture: • Collaborative entrepreneurial spirit • Winning through customers • High ethical standards, openness and trust • Expectations for results • Respect and value peopleIf you believe you match our values and have the experience we’re looking for, apply! We can’t wait to hear from you!Work Arrangement: Onsite Salary Range: $150,000.00 - $170,000.00 We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.All qualified applicants will receive consideration for employment without discrimination based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.Attention Applicants: If you are an individual with a disability and require reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact for assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response.Job Function:

Job Description:The RoleWe are seeking a highly qualified and passionate Director of Engineering/Technical Lead to oversee the development and launch of our next-generation AI SaaS products. The successful candidate will have a deep passion for artificial intelligence, innovative cloud technologies, and the creation of high-impact solutions that address both business and user needs. Your responsibilities will span across technical strategy development, working with partners and customers, capability implementation, leading and working alongside the development team, and delivering value to our users, partners, and customers.You will be a Tech Lead in a cross-functional team of data scientists, developers, designers, analysts, and product managers to launch and scale our FCAT products to both internal and external users. As part of our dynamic technology team, you will play a pivotal role in defining the strategic technical direction of our core SaaS products.Lead the development and maintenance of scalable AI SaaS applications.Establish standards and ensure alignment with existing technology roadmaps.Remove barriers to deliver value and drive progress.Work with the team to enhance application scalability, stability, and resilience.Design, develop, and modify complex SaaS systems.Collaborate with Product Leaders and Architects to establish non-functional requirements for scale and performance.Define an end-to-end performance testing strategy and address test data needs for scalability.Explore and drive implementation of machine learning and AI advancements to improve application development and solve business/user needs.The Expertise and Skills You Bring Bachelor's Degree in Computer Science or related field required.Proven experience as a hands-on technical leader delivering SaaS products.Expertise in Python and full-stack development.Experience building scalable systems with a strong understanding of distributed systems, microservices, event-based services, data pipelines, and orchestration.Proficiency in object-oriented programming (OOP) and design patterns.Experience with various database technologies: SQL (Oracle & Snowflake), NoSQL, Graph, Vector.Experience working with AWS and infrastructure-as-code (CloudFormation).Experience implementing CI/CD and DevOps best practices.Proficiency in containerization with Kubernetes and Docker.Able to explain complex system concepts to non-technical audiences.Experience leading technology teams for AI and cloud products.Experience working with modern transactional and data processing applicationExperience developing AI-powered applications.Experience building/testing secure, high-volume complex applications using Java, Oracle, Web Services, Angular, XML/JSON, and SQL.Experience designing IT architecture and facilitating change reviews, release management, and infrastructure change schedules.Knowledge of security concepts, such as SSL/TLS, OAuth, encryption.Willingness to partner effectively with technology & business partners.Successful delivery of key technology efforts in support of our business strategy.Partnership with application developers to ensure technology solutions align with our long-term architecture and application strategies.Defining standards for application and infrastructure design, engineering, and development.Mentoring and developing more junior technical staff.Providing knowledge and experience through insights and great ideas.The Team Be part of a multi-functional FCAT team working to conceptualize, create, test, and deploy innovative Data products using the latest cloud technologies. Discover, transform, and contribute to data originating from diverse sources such as social media, trading systems, historical data stores etc.As the innovation engine for Fidelity Investments, we prototype and pilot new businesses and capabilities that continue to distinguish our brand as the best customer experience in the financial services industry. See what we’re up to at fcatalyst.com. Certifications:Category:Information TechnologyFidelity’s hybrid working model blends the best of both onsite and offsite work experiences. Working onsite is important for our business strategy and our culture. We also value the benefits that working offsite offers associates. Most hybrid roles require associates to work onsite every other week (all business days, M-F) in a Fidelity office.

Compensation Type: Yearly Highgate Hotels: Highgate is a premier real estate investment and hospitality management company widely recognized as an innovator in the industry. Highgate is the dominant player in U.S. gateway markets including New York, Boston, Miami, San Francisco and Honolulu, with a rapidly expanding presence in Europe, Latin America, and the Caribbean. Highgate’s portfolio of global properties represents an aggregate asset value exceeding $20B and generates over $5B in cumulative revenues. The company provides expert guidance through all stages of the hospitality property cycle, from planning and development through recapitalization or disposition. Highgate also has the creativity and bandwidth to develop bespoke hotel brands and utilizes industry-leading proprietary revenue management tools that identify and predict evolving market dynamics to drive out performance and maximize asset value. With an executive team consisting of some of the industry’s most experienced hotel management leaders, the company is a trusted partner for top ownership groups and major hotel brands. Highgate maintains corporate offices in London, New York, Dallas, and Seattle. Location: Overview: The Chief Engineer is responsible for the day-to-day operations of the engineering division. In the absence of the Director, the assistant will assume the administrative, financial and operating aspects of the hotel as they relate to engineering. Responsibilities: Assist in developing and implementing plans to maintain property, equipment, grounds and other assets in a safe and acceptable state of repair.Ensure the hotel is in compliance with all local, state and federal laws.Supervise and train all Engineering staff in Customer Service, Empowerment, Standard Operating Procedures and Loss Prevention.Create and post all Engineering staffs schedules.Create and adhere to annual budget for department.Assist in developing financial forecasts and actively participate in monthly profit/loss review meetings.Create and implement preventative maintenance program for all hotel equipment.Ensure all emergency and life safety equipment and systems are inspected, tested and certified per Highgate Hotel standards.Actively participate in energy conservation programs.Review all guest and meeting planner comment cards to ensure problems are identified and corrected in a timely manner.Ensure compliancewith the Americans with Disabilities Act (ADA).Assist with the administration of all vendor contracts controlled by the engineering department.Ensure that room maintenance requests are handled in a prompt and courteous manner.Follow up on all alarms immediately to determine the exact location and cause.Determine emergency status and report findings to Front Desk.Take immediate action as necessary.Assist as necessary with special projects and renovations.Support and participate in all Highgate Hotel programs.Participate in Highgate Hotel Safety Committee. Qualifications: At least 3 years of progressive facilities management experience in a hotel or a related field; or a 2-year college degree and 1 year of related management experience.High school diploma or equivalent required.Stationary Engineer’s license if required by local code.HVAC, electrical, plumbing, boiler operations and general maintenance skills required.Long hours sometimes required.Heavy work – Exerting up to 100 pounds of force occasionally, and /or 50 pounds of force frequently and/or up to 20 pounds of force constantly to lift, carry, push, pull or otherwise move objects.Maintain a warm and friendly demeanor at all times.Must be able to effectively communicate both verbally and written, with all level of employees and guests in an attentive, friendly, courteous and service oriented manner.Must be effective at listening to, understanding, and clarifying concerns raised by employees and guests.Must be able to multitask and prioritize departmental functions to meet deadlines.Approach all encounters with guests and employees in an attentive, friendly, courteous and service-oriented manner.Attend all hotel required meetings and trainings.Participate in M.O.D. coverage as required.Maintain regular attendance in compliance with Highgate Hotel Standards, as required by scheduling, which will vary according to the needs of the hotel.Maintain high standards of personal appearance and grooming, which include wearing nametags.Comply with Highgate Hotel Standards and regulations to encourage safe and efficient hotel operations.Maximize efforts towards productivity, identify problem areas and assist in implementing solutions.Must be effective in handling problems, including anticipating, preventing, identifying and solving problems as necessary.Must be able to understand and evaluate complex information, data, etc. from various sources to meet appropriate objectives.Must be able to maintain confidentiality of information.Perform other duties as requested by management.

JOB DESCRIPTION: Lead Process Engineer Burlington, MA, USA Poly6, an emerging leader in aerospace and defense innovation, is enabling production of complex turbine engine designs by combining additive manufacturing, advanced computation and material science. Our technology is uniquely suited to increase the efficiency of complex manufacturing processes as well as advance engineering design capabilities. Long term benefits of Poly6’s products include reduced greenhouse gas emissions for the aviation sector. You will have the opportunity to work alongside a highly talented team to solve problems in one of the world’s most complex engineering sectors: aviation. JOB SUMMARY Reporting to the Plant Engineering Manager, the Lead Process Engineer - Additive Manufacturing will be primarily focused on the process control and technical execution of additive manufacturing processes within the manufacturing facility in Burlington, MA, and secondarily to assist with technology transfer to a scaled greenfield manufacturing facility in Ohio. This position requires a strong working knowledge of process control, manufacturing, materials science, with strong investigational and root cause analysis skills. Specific job-related responsibilities include: RESPONSIBILITIES Lead the control and optimization of manufacturing processes, focusing on stability, statistical process control (SPC), and effective change management during scale-up. Maintain and analyze process parameters, connecting process inputs to product outputs to optimize control limits and enhance overall product quality. Understand and optimize material interactions with manufacturing processes to improve product performance and reliability. Measure and control Key Process Variables (KPVs), diagnosing and monitoring out-of-control events to ensure stable and predictable operations. Contribute to cross-functional projects aimed at process control, scrap reduction, and continuous improvement. Support root cause analyses for process non-compliances and ensure timely corrective actions. Help maintain robust process documentation, identifying and implementing opportunities for workflow improvements. Provide hands-on technical assistance, including repairing, improving, installing, maintaining, and validating manufacturing equipment. Collaborate cross-functionally on continuous improvement initiatives related to equipment implementation, cost reduction, and productivity enhancements. Support product engineering efforts by providing process analysis, data reporting, and recommendations. Standardize preventative maintenance systems and documentation for manufacturing equipment, ensuring adequate training for seamless handoff to operational counterparts. Offer rapid-response daily production support, including personnel training, data/scrap analyses, troubleshooting process problems, and performing equipment maintenance. Support Design of Experiments (DOEs) and trial execution to validate process improvements and changes, including participation in PFMEA and JSA initiatives as needed. Participate in special projects as assigned by management. QUALIFICATIONS Bachelor’s degree in Engineering (or related field) with 2-4 years of relevant experience, or 4+ years of equivalent experience in a manufacturing environment. Demonstrated experience in controlled manufacturing environments focusing on process control, process improvement, and operational excellence. Proficiency in applying SPC and DOE methodologies for process analysis and improvement. Working knowledge of statistical analysis software (e.g., Minitab, JMP) and advanced Microsoft Excel skills. At least 1 year of practical experience applying Six Sigma principles in manufacturing, with documented project successes. Hands-on experience with manufacturing equipment, processes, and related software tools. PREFERRED EXPERIENCE Experience with polymer or similar material applications in industrial manufacturing. Strong skills with the Microsoft Office suite. Excellent verbal and written communication abilities, with a track record of working effectively across engineering and operations teams. Hands-on experience operating, maintaining, and optimizing production processes, including familiarity with CAD models and related tools. Understanding of processes, systems, and technical aspects of scaled manufacturing operations. A data-driven mindset focused on driving innovation and improving process capability and efficiency. Six Sigma Green Belt or equivalent certification. Experience with control plans and data collection systems for process monitoring and reporting. Involvement in new process development and scale-up activities. Understanding of material interactions within manufacturing processes and the ability to optimize for improved performance. This position requires access to information protected under U.S. export control laws, including the International Traffic in Arms Regulations and/or the Export Administration Regulations. Please note that any offer for employment may be conditioned on authorization to receive software or technology controlled under these U.S. export laws without sponsorship for an export license. Poly6 is an equal opportunity employer. We do not discriminate based on age, color, genetic information, religion, sex, veteran status, or national origin. This is a non-management positionThis is a full time position

Join our team of more than 34,000 team members, supporting our members and communities in our Club Support Center, 235+ clubs and eight distribution centers. BJ’s Wholesale Club offers a collaborative and inclusive environment where all team members can learn, grow and be their authentic selves. Together, we’re committed to providing outstanding service and convenience to our members, helping them save on the products and services they need for their families and homes. The Benefits of working at BJ’s• BJ’s pays weekly•Eligible for free BJ's Inner Circle and Supplemental membership(s)*• Generous time off programs to support busy lifestyles* o Vacation, Personal, Holiday, Sick, Bereavement Leave, Jury Duty• Benefit plans for your changing needs* o Three medical plans**, Health Savings Account (HSA), two dental plans, vision plan,flexible spending • 401(k) plan with company match (must be at least 18 years old)*eligibility requirements vary by position**medical plans vary by locationManage assigned projects to an on-time and on-budget completion to include new and takeover club locations; remodels and expansions; and new club gas facilities. This position is responsible for assisting and coordinating with real estate directors for the hiring of Consultant teams; representing the companies interests in public meetings and hearings; facilitating complete project approvals from State, Federal and local municipalities; the development of construction documentation that is in accordance with the company prototype, budget and schedule; on all assigned new club developments. Project involvement will range from Landlord reverse build-to-suits to full self-develop owned projects which may include surplus property for other retail uses. This position is to maintain a current schedule and budget update on all assigned projects and report same to real estate directors on an as needed basis.Utilize existing criteria for RFP's and solicit quotes for Consultant's scope of work with assistance from the real estate directors. Support real estate directors in developing conceptual site plans and establishing projectCoordinate efforts with the real estate directors of the project team through the conceptual design and due diligence phase of the project in order to establish the development feasibility, preliminary construction budgets and schedules. Support the Real Estate Directors negotiations by providing information/documentation necessary to complete the project. Assist and coordinate the development of approval and construction documents. Work with the project team to insure compliance with the project parameters, budget and schedule. Insure the accuracy and timeliness of document development. Attend working sessions and public hearings with state and local municipality staff to review projects and prepare for public hearings. Coordinate with the project team and insure that permits are issued; fees are filed; bonds are procured; and agencies are notified in advance of constructionSchedule and arrange project meetings with Consultants, Attorneys and BJ'sAdminister contract invoicing, amendments, change orders and close out documentation for allDevelop an entitlement timeline with the team to be incorporated into the overall project schedule. Coordinate the development of construction documents for the building, civil, off-site and gas in order to maintain the approved schedule for permitting and construction. Report the progress of project approvals in order to maintain an updated project schedule that management can rely on for scheduling club openings and events. Qualifications:Bachelor’s Degree in civil engineering required, 2 to 3 years’ experience in field. Retail Corporate or Civil Engineering Design firm experience a plus. General knowledge of land use planning/civil engineering principles and with Regulatory Agency/Municipal approval process. Familiarity with retail site design with understanding of soils, drainage, environmental and other related activities. Awareness of legal and environmental issues related to land. In accordance with the Pay Transparency requirements, the following represents a good faith estimate of the compensation range for this position. At BJ’s Wholesale Club, we carefully consider a wide range of non-discriminatory factors when determining salary. Actual salaries will vary depending on factors including but not limited to location, education, experience, and qualifications. The pay range for this position is starting from $80,000.00

ESSENTIAL DUTIES and RESPONSABLITIES includes but not limited to the following.Performing the installation, maintenance, repair and operation of mechanical, electrical and power generation equipment and systems to support the critical environment of our Lab/office buildings.Operates systems in a safe and efficient manner in accordance with government regulatory compliance and standard operating procedures.Ability to quickly learn building control, electrical and UPS systems, utilizing on the job training, operations manuals and documentation.Performs predictive, planned, preventative and routine maintenance as well as equipment rounds and service requests as directed. Performs maintenance in accordance with the JLL Preventative Maintenance Program. Assist with the development and improvement of preventative maintenance programs, schedules, work instructions, SOP ’s and operational procedures.Inspects and repairs pumps, fans, valves, and motors ensuring proper operation of the client equipment and systems. Performs all duties in a safe manner and in accordance with established work standards and practices.Performs visual and operational inspection of associated equipment and interprets specifications, blueprints and job standards to perform assigned duties.Establishes work procedures to meet production schedules.Recommends measures to improve production methods, equipment performance and quality of product, suggesting changes in working conditions and use of equipment to increase efficiency of department, shop, or work crew.Determines and/or assists with analyzing and resolving work problems and achieving work goals Maintains time and production records and customer service requests. .Must be comfortable and flexible enough to work with a wide-ranging and changing scope of responsibilities while adhering to the constraints of procedures put in place to minimize the risk for human error.Team player with the desire to foster teamwork to help create a positive working environment. Control the daily operation of all mechanical equipment in the physical plant and buildingsPerform maintenance and repairs to the Mechanical, Plumbing, Structural, Furniture, Fire, Life Safety, and Control systems for the facility to keep these systems up to applicable standardsMonitor Maintains responsibility for tenant services, preventative maintenance, purchasing and inventory control, contracted maintenance, general maintenance and technical proficiencyMonitoring operation and maintaining refrigeration, water cooling and air conditioning equipment, boilers, heating, ventilating and hot water equipment, pumps, valves, piping and filters, other mechanical and electrical equipmentPerforms and/or completes all tenant service requests accurately and expediently.Be able to evaluate building systems to monitor and to improve performance to operate efficiently.Complies with all policies and procedures established for the building, including safe storage, usage, and disposal of hazardous materials while maintaining a clean and safe workplacePeriodically acts as the on-call engineer for the portfolio of office buildings.Actively participates in emergency response procedures, technical and safety training programs. Perform all work using the proper safety equipment and in a safe manner.QUALIFICATIONS – To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required.Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.EDUCATION/EXPERIENCE– A high school diploma or GED is required. A minimum four (4) years experience in the building maintenance industry and accredited trade school degree in HVAC, electronic, or other industry related trade. Union training and certification is also acceptable. Must have Universal CFC certification. Should be knowledgeable in the safe and proper use of the following tools: ladders, lifts, basic hand tools, volt meter, manual drain auger, plumbers helper, safety goggles, ear protection, and fire extinguisher.LANGUAGE SKILLS- Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Have the ability to write routine reports and correspondence.MATHEMATICAL SKILLS- Ability to calculate figures and amounts such as load balancing, proportions, percentages, area, circumference, and volume. Have the ability to apply concepts of basic algebra and geometry.REASONING ABILITY- Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Have the ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule format.PHYSICAL DEMANDS- Physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. Theemployee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds.WORK ENVIRONMENT- The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock, moving mechanical parts and heights up to 30 feet. The employee is occasionally exposed to wet and/or humid conditions as well as very cold and uncomfortable heat while inside and out of the facility. The noise level in the work environment is at times moderately loud.#PMR1

Markem-Imaje, A Dover Company, is a trusted world manufacturer of product identification and traceability solutions, offering a full line of reliable and innovative inkjet, thermal transfer, laser, print and apply label systems. Markem-Imaje delivers fully integrated solutions that enable product quality and safety, regulatory and retailer compliance, better product recalls and improved manufacturing processes.Dover Corporation® (NYSE: DOV). Dover is a diversified global manufacturer and solutions provider with annual revenue of approximately $8 billion.The Role:The role of the embedded software engineer is to design, implement, validate, and maintain the embedded software for Markem-Imaje current and future products across a variety of printing/marking technologies and application spaces using industry standard best practices. This role requires the ability to work on problems of moderate scope, follow Markem-Imaje standard practices and procedures, and work both as an individual contributor and as part of a team taking direction from senior team members.Job Responsibilities:• Design, implement, and validate high quality embedded software using established standards as part of an Agile team of engineers• Contribute ideas for best practices and tools to improve team efficiency, effectiveness, and software quality.• Conduct design and code reviews, participate in design and code review, providing feedback to other developers.• Accept and act upon constructive feedback from fellow developers.• Stay up to date with the latest industry standards and advocate for continuous improvement in the areas of unit testing, system testing, automation, code analysis, source control, continuous integration, etc.• Contribute high-level and detailed software estimation to support planning activities.• Complete high-level well-defined tasks independently.• Collaborate effectively with remote team members and external partners.• Create advanced unit tests with minimal guidance from senior engineers.• Create automated system tests and perform exploration testing.• Develop a comprehensive understanding of the technical workings of various Markem-Imaje printing technologies.• Travel: Up to 15%, including international trips• Mix of office and laboratory environmentJob Requirements:• Bachelor’s or master’s degree in computer science, Computer Engineering, or Software Engineering• Minimum 2-5 years of professional experience developing software• Demonstrable record of developing high-quality embedded software for end-user products.• Ongoing, advanced coursework and/or research to stay current preferable.• Experience with Agile/Scrum development practices.• Experience developing embedded software in an industrial printing domain is a plus.Knowledge & Skills:• Basic design skills such as functional decomposition, UML, and design patterns.• Experience writing C and C++ code. Demonstrate the ability to use simple C and C++ constructs.• Experience with scripting languages such as python, perl, etc.• Solid understanding of object-oriented programming, pair programming, memory management, distributed systems programming, multi-threaded programming, and on-target debugging with application development on Linux OS.• Understanding and knowledge of test-driven development, unit testing, code reviews, and defect characterization.• Basic understanding of requirements analysis.• Knowledge of FreeRTOS and/or Yocto Linux• Familiarity with configuration management skills such as revision control, continuous integration and deployment, automated build systems, release management, and technical documentation.• General knowledge of real time operating system concepts and some experience in their use.• Basic knowledge of electronics including micro-controllers, memory, and peripherals as well as in reading schematics and basic use of oscilloscopes/logic analyzers.• Knowledge and experience with the following tools are a plus: GCC, Visual Studio, Eclipse, JSON, XML, Python, Bamboo, SCONS, FitNesse, Lauterbach debuggers.• Ability to work within a fast-paced agile software team.• Ability to quickly learn new concepts and software.• Excellent interpersonal, written, and oral communication skills.Behaviors:• Self-motivated, independent, detail oriented, and responsible in a collaborative team.• Able to follow instructions.• Able to practice and promote organizational values of integrity, innovation, respect, and reliability.• Willing to communicate openly and directly.• Strong discipline in all conducted activities.The right candidate will be aligned to our values and culture: • Collaborative entrepreneurial spirit • Winning through customers • High ethical standards, openness, and trust • Expectations for results • Respect and value peopleIf you believe you match our values and have the experience we’re looking for, apply! We can’t wait to hear from you!Work Arrangement: Onsite Salary Range: $87,000.00 - $131,000.00 We consider several job-related, non-discriminatory factors when determining the pay rate for a position, including, but not limited to, the position’s responsibilities, a candidate’s work experience, a candidate’s education/training, the position’s location, and the key skills needed for the position. Pay is one of the Total Rewards that we provide to compensate and recognize employees for their work.All qualified applicants will receive consideration for employment without discrimination based on race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.Attention Applicants: If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please let us know. Likewise, if you are limited in the ability to access or use this online application process and need an alternative method for applying, we will determine an alternate way for you to apply. Please contact for assistance with an accommodation. Kindly specify Job Requisition Number / Job Title and Location in response.Job Function :

ADVANCING OUR OPERATIONSIn order for us to complete our missions, our technology simply cannot fail. Covering a wide range of specialties ranging from aeronautical and computer systems to flight test and mechanical, Developmental Engineers provide advanced skill and knowledge of their particular specialties. Responsible for everything from the planning to implementation of their projects, these experts are essential to the success of operations all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor’s degree in engineering related to one of the following specialties: aerospace, aeronautical, astronautical, computer, electrical, electronics, communication or mechanicalQualificationsCompletion of the Defence Acquisition UniversityFundamentals of SystemsAcquisition Management course or Acquisition Fundamentals courseCompletion of the Air Force Flight Test Engineer course or comparableMinimum of 24 months of experience in qualified position or a master’s degree in a specified discipline and 12 months’ experience or a Doctor of Philosophy degree in a specified disciplineCompletionof Officer Training School (OTS), AirForce Academy (AFA) or AirForce Reserve Officer Training Corps (AFROTC)Must be between the ages of 18 and have not reached your 42ndbirthday

PREVENTING ENVIRONMENTAL HARMWe go to extraordinary measures to protect our Airmen from environmental hazards and infractions. Applying engineering and scientific principles, Bioenvironmental Engineers identify and evaluate potential dangers and develop programs to prevent illness and injury. With an emphasis on discovering problems before they occur, these specialists ensure the health and safety of Airmen and their families in environments all over the world.REQUIREMENTSYou must meet several requirements before joining the Air Force. These concern your background, overall health and other standards set by the Air Force, Department of Defense and federal law.Minimum EducationBachelor of Science in engineering from an ABET-accredited institutionQualificationsCompletion of qualifying Bioenvironmental Engineering courseMinimum of 24 months of experience in bioenvironmental engineering assignmentsCompletion of Officer Training School courseMust be between the ages of 18 and have not reached your 42ndbirthday