Job Description SummaryAre you ready to innovate the future At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. We are looking for your talent and expertise to continue to transform flight as part of our GE9X team. Looking to impact aviation for years to come Your work on the GE9X engine will do just that, as you help build the most fuel-efficient engine in its class. You’ll be part of a team that embraces your drive, curiosity, unique ideas and perspectives. Join us and share in our pride and purpose that affects the lives of millions around the world. There has never been a better time to be part of our company and our culture and to see your career take flight!Within the Lifecycle Engineering team, as a lead engineer, you will lead mechanical design efforts around product durability, validation, and entry into service preparations. At this key pre-entry into service (EIS) phase of the GE9X program, it is critical that the team is well prepared to identify and execute solutions for potential durability shortfalls before EIS. In this role, you will take charge to recognize and complete validation activities, own repair substantiation efforts, support the leading indicator program and partner with product support engineering for implementation. It is with your efforts that the GE9X program will be well positioned for a predictable and reliable EIS and is well equipped to address any issues that do arise during operation.In this role, you will have some autonomy to focus on the execution of activities within an operating discipline covered by standard functional practices and procedures. As the services durability leader for your module, your judgement will be paramount in the success of the desired team outcomes which will require you to have the ability to propose different solutions outside of set parameters with advice from your peers.A job at this level you will work closely with cross functional partners to develop in-depth knowledge and expertise to make technically sound decisions with some level of evidence. You will act in the capacity of an individual contributor with proven interpersonal skills, execute the design, analysis, or evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements.Job DescriptionRoles and ResponsibilitiesLead efforts around product durability and validation. Recognize and complete validation activities, own repair substantiation efforts, support the leading indicator program and partner with PSE for implementation.Execute the design, analysis, or evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements. This work would include mechanical and/or electrical engineering for all productsHas knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the marketUses some judgment and has some ability to propose different solutions outside of set parameters to address more complicated manufacturing processes with technical variety and/or interdependent production cycles. Uses technical experience and analytical thinking. Uses multiple internal and limited external sources outside of own teams to arrive at decisions.Acts as a resource for colleagues with less experience. May lead small projects with low risks and resource requirements. Explains information; developing skills to bring team members to consensus around topics within field. Conveys performance expectations and may handle sensitive issues.Required QualificationsBachelors of Science degree in engineering from an accredited university or collegeMinimum 3 years' experience in design engineering roleDesired CharacteristicsStrong oral and written communication skills.Demonstrated ability to analyze and resolve problems.Ability to document, plan, market, and execute programs.Established project management skills.5+ years experience in design engineering role including some exposure to fielded product supportThis role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.We are seeking an Electrical Engineer II with a Bachelor's degree in Electrical Engineering or related Engineering field. In this challenging, fast-paced environment, you'll have the opportunity to apply your knowledge and experience to design and create the most groundbreaking aerospace and defense technologies - those that exist today and those that will shape tomorrow. What to look forward to: Are you ready to unleash your technical creativity Dream, Innovate, Inspire and Empower the next generation to transform humanity through technology and imagination! Electrical Engineers at Sierra Nevada Corporation research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll conceptualize and design new products and processes throughout the product lifecycle from analog and digital circuits to fully integrated systems.The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries. https://www.sncorp.com/company/business-areas/Must-haves: Bachelors of Science degree in Electrical Engineering or other related discipline and typically 3 or more years of relevant experienceKnowledge of engineering principles and practicesExperience with Computer Aided Engineering toolsUnderstanding of electrical systems design and hardware integrationExperience working in multi-disciplinary design and development teamsPreferred: Background in the Aerospace and Defense IndustryExperience with extensive ground and flight test programsExperience with 14 CFR Part 25 testingExperience with Military Systems testingFamiliar with Ethernet, 1553, ARINC 429, and CAN bus protocolAt Sierra Nevada Corporation (SNC) we deliver customer-focused technology and best-of-breed integrations in the aerospace and defense sectors. SNC has been honored as one of the most innovative U.S. companies in space, a Tier One Superior Supplier for the U.S. Air Force, and as one of America’s fastest-growing companies. Learn more about SNCSNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE: This position requires the ability to obtain and maintain a Top Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. Citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!

Engineering Director - Components & Accessories Repair Development Center of Excellence (RDCoE)Cincinnati, OhioBuild an Aviation Career You're Proud OfAt StandardAero, we use our ingenuity and know-how to find solutions for the simple to the most complex challenges in aviation. Together, we get the job done and done well. Our stability, resources, and respectful culture supports you in building a solid career with a great team you can count on day in and day out for the long term.StandardAero's Component Services Sector is in search of a Director of Repair Development Center of Excellence (RDCoE) to manage all aspects of repair development and new product introduction. The ideal candidate would have specific experience in developing and implementing repair processes specific to aero- and aero-derivative gas turbine engine components.As a Director, Repair Development Center of Excellence you'll ensure technical tasks are completed in accordance with customer, regulatory and corporate requirements, on budget and on time. Identify and implement measures to reduce costs, reduce cycle time, improve quality, improve innovation and develop people. Manage and direct engineering personnel, including production repair and repair development.What you'll do:Responsible for the completion of all technical tasks in line with customer and corporate expectations, budgets and schedules. Review and approve proposals, recommend and implement cost-saving or time-saving changes.Manages, leads and develop department personnelMake hiring decisions (in conjunction with others), conduct performance reviews, recommends salary actions, reward and recognize employees and carry out disciplinary actions when necessary.Monitor and assign people to their respective jobs. Set goals and expectations for employees in the Engineering Department. Primarily hold engineering employees accountable for performance.Ensure that repair engineering data is in compliance with corporate and regulatory policiesCoordinate with other members of the management team and keep them informed of project status and performance versus budget/schedule.Review and approve project budgets and schedules for the Engineering Department.Make recommendations regarding staffing levels, facilities, equipment, training, etc. Stay informed of current trends and practices in the engineering field. Review the state-of-the art engineering developments and makes recommendations to the management team on cost-effective additions and/or modifications to meet department and corporate goals.May perform other duties as required.Position Requirements:Bachelor's degree in engineering or a related field. Current or past DER delegation is a plus.Minimum of 10 years of engineering experience. 5+ years of supervisory experience is preferred. Prior Repair / MRO background is required.Working knowledge of gas turbine engine theory and performance is desirable.Understanding of regulatory requirements and OEM ESM structure highly desirable.Must be able to plan, schedule and allocate resources effectively and efficiently. Ability to handle multiple projects and multiple deadlines.Possess excellent interpersonal and communication skills. Ability to keep a cool head in a high-stress, high-energy environment. Must be able to quickly analyze a situation and make wise decisions.Leadership skills including ability to develop and mentor a diverse staff. Ability to influence a team inside and outside of the engineering department. Certificate or training in Lean / CI techniques is highly desirable.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesAbout UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

What will you do Responsible for implementing and sustaining Lean and Six Sigma concepts, interfacing with cross-functional teams and other functional departmentsDeveloping manufacturing PFMEAs, Control Plans and recognizing and achieving improvements in tooling and processesMaintain current knowledge of the latest methods and technologies, and be able to recognize their applicability within our manufacturing and assembly operationsResponsible for monitoring and reporting key metrics and developing improvement planParticipate and conduct continual improvement activities, such as 5S, SPS, Six Sigma and ISO, to enhance the quality systemEnsure action items generated from SPS and ISO audits are completed in a timely mannerAssist Quality Manager and team in establishing, implementing and maintenance of the quality management systemsContribute and lead Digital Quality implementation within the plantPrepare Pareto charts, and 8D reports as requiredContribute to improving customer satisfaction and achieving quality goals by defining and implementing projects and processesWhat qualifications will make you successful Bachelor's Degree in Industrial, Mechanical, or Manufacturing Engineering preferredStrong Quality, Industrial and/or Manufacturing Engineering backgroundApplication of Lean and Six Sigma techniques, statistical methodsMechanical aptitude highly desiredAbility to lead and interact with others in a collaborative environment is a mustExperience with Lean Manufacturing tools, 5S, 8D, Kaizen events, Six Sigma tools, PFMEA, Control Plans, Process Flow, Process Auditing, Process Capability analysis, ISO, Poka Yoke design desired What's in it for me Schneider Electric offers a robust benefits package to support our employees such as flexible work arrangements, paid family leave, 401(k)+ match, and more.Who will you reportto Customer Satisfaction & Quality ManagerLet us learn about you! Apply today. Why us Schneider Electric is leading the digital transformation of energy management and automation. Our technologies enable the world to use energy in a safe, efficient and sustainable manner. We strive to promote a global economy that is both ecologically viable and highly productive.25.7bn global revenue137 000+ employees in 100+ countries45% of revenue from IoT5% of revenue devoted for R&DYou must submit an online application to be considered for any position with us. This position will be posted until filledIt is the policy of Schneider Electricto provide equal employment and advancement opportunities in the areas of recruiting, hiring, training, transferring, and promoting all qualified individuals regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status, or any other legally protected characteristic or conduct. Concerning agencies: Schneider Electric does not accept unsolicited resumes and will not be responsible for fees related to such.

Job Description SummaryAre you ready to innovate the future At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. We are looking for your talent and expertise to continue to transform flight as part of our GE9x team. Looking to impact aviation for years to come Your work on the GE9x engine will do just that, as you help build the most fuel-efficient engine in its class. You’ll be part of a team that embraces your drive, curiosity, unique ideas and perspectives. Join us and share in our pride and purpose that affects the lives of millions around the world. There has never been a better time to be part of our company and our culture and to see your career take flight!Job DescriptionRoles and ResponsibilitiesModule focal to lead efforts around product durability and validation. Recognize and complete validation activities, own repair substantiation efforts, define the leading indicator program and partner with other organizations for implementation, and serve as the focal for the module. Execute the design, analysis, and evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements.Basic understanding of key business drivers; uses this understanding to accomplish own work. Good understanding of how work of own team integrates with other teams and contributes to the area.Work with a variety of engineering organizations and contribute to the development of the engine systems and designs.Develop in-depth knowledge of the technical discipline.Prepare and present technical data to internal and external customers.Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures.Resolves issues in situations within current technical knowledge base and judgment within established procedures. Consults more senior team members for issues outside of defined instructions/parameters.Be responsible for monitoring and communicating project status to Engineering leadership. Provide timely communications on significant issues or developments.Participate as a presenter in technical and program reviewsRequired QualificationsBachelor's degree in engineering from an accredited university or collegeMinimum of 3 additional years of experience in a relevant engineering positionDesired CharacteristicsFundamental understanding of turbomachinery designPrevious experience in design of Aviation componentsProficient with Ansys and UnigraphicsStrong technical aptitude, including applicable engineering tools and systemsAbility to communicate clearly and effectively within an organizationEstablished project management skillsDemonstrated ability to analyze and resolve problemsDocumented experience of being a self-starter with a passion for problem solving and driving solutionsActs as a resource for colleagues with less experienceHumble: respectful, receptive, agile, eager to learnTransparent: shares critical information, speaks with candor, contributes constructivelyFocused: quick learner, strategically prioritizes work, committedLeadership ability: strong communicator, decision-maker, collaborativeProblem solver: analytical-minded, challenges existing processes, critical thinker#LI-EDRICH #GE9XThis role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.Are you ready to unleash your technical creativity Dream, Innovate, Inspire and Empower the next generation to transform humanity through technology and imagination! Electrical engineers at SNC research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems.The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries. Learn more about IASYou will be leading a large instrumentation test team across the full spectrum of test operations to include data acquisition package design and installation; test planning, execution, analysis, and reporting support; data management; flight operations support; and customer interactions.Responsibilities:Leading a large team across a fleet of test aircraft through a full-scale test campaignLeading the instrumentation effort from design to de-modification through requirements development, design, lab test, integration, and test operations supportParticipating in customer lead Integrated Test discussions at the Senior Leadership levelCoordinating with Test Engineering & Operations teams on instrumentation needs, schedule, and facilitiesStatus work activity as a Control Account ManagerPerform functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate instrumentation requirements into hardware and software specificationsAct as a technical liaison to the Test Engineering ManagerMust-haves:Experience with extensive ground and flight test programsExperience with 14 CFR Part 25 testingExperience with Military Systems testingExperience independently executing functional responsibilities for small to medium sized programsFamiliar with Ethernet, 1553, ARINC 429, and CAN bus protocolBachelor's degree in an Engineering field of study and typically 14 years of experiencePreferred Skills:Previous leadership experience: exposure to recruiting employees including assigning, directing and evaluating their work and overseeing the development and maintenance of staff competenceAbility to independently execute functional responsibilities for large programsLarge transport category jet aircraft test experienceExperience with designing and utilizing complex instrumentation data acquisition packagesExperience generating electrical and mechanical drawings for instrumentation installation activitySoftware development or coding experienceAt SNC we deliver customer-focused technology and best-of-breed integrations in the aerospace and defense sectors. SNC has been honored as one of the most innovative U.S. companies in space, a Tier One Superior Supplier for the U.S. Air Force, and as one of America’s fastest-growing companies. Learn more about SNCSNC offers annual incentive pay based upon performance that is commensurate with the level of the position.SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE:This position requires current/active Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. Citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!

Repair Development EngineerCincinnati, OhioBuild an Aviation Career You're Proud OfExplore a career where you're challenged and have access to exciting engineering projects that stretch your talents. You'll design and create new systems and technologies to help solve complex aviation problems. Our expert team and supportive leaders give you the trust and independence to do your best work.Design, test, and implement advanced technologies to improve aircraft performance, safety, and reliability, so we continue to deliver excellent aviation solutions. You'll collaborate with other departments to ensure that our products and services meet the highest industry standards.As a Repair Development Engineer you'll provide engineering support and participate in all phases of product/process development for all aspects of component repair related to development of minor repairs and continuous improvement programs.What you'll do:Participates in all phases of product/process development. Provides analytical support, evaluation and calculations for new repair development studies and subsequent initiation including cost benefit analysis, evaluating end-user performance and providing cost and schedule estimates for proposed work packages.As part of the repair development group, provides support and consultation services with regard to new technologies and the development of new repairs and processes.Prepares engineering reports and data packages for repair development substantiation and approval.Provides the technical expertise and experience necessary to make airworthiness engineering decisions regarding major repair design activities, in accordance with the company design approval organization manual.Provides direction for continuous improvement of component repair methods and capabilities.Compiles and analyzes data on repairs; identifies root causes and rectify; develops measures of performance on all repair processes.Supports the production development group activity in modifying and refining existing repair schemes to eliminate and/or reduce the number of rejects occurring.Provides technical training support or mentoring for repair development and metallurgical analysis.Directs acquisition of equipment as required to meet repair development objectives. Establishes and monitors equipment safety issues.Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions.Carries out special projects as assigned.What skills you will use:Fully conversant with testing methods and experiment design to meet airworthiness compliance program requirements.Strong planning, organizational, analytical, leadership, interpersonal, decision making, oral and written communication skills.Strong project management skills.Thorough knowledge of company process, company instruction and rework process instruction manuals.Thorough knowledge of aerospace materials and processes.Thorough knowledge of gas turbine engine theory and performance.Ability to read, understand and interpret blueprints.Working knowledge of PC's in the current company operating system environment.Working knowledge of precision measuring instruments.In jurisdictions governed by a regulatory body or with an association that is governed by local legal requirements, registration is required.University degree in materials science, mechanical engineering or metallurgy; or equivalent.Experience in an aerospace engineering environment.Must be a U.S. Citizen.Benefits that make life better:Comprehensive Healthcare401(k) with 100% company match; up to 5% vestedPaid Time Off starting on day oneBonus opportunitiesHealth- & Dependent Care Flexible Spending AccountsShort- & Long-Term DisabilityLife & AD&D InsuranceLearning & Training opportunitiesAbout UsRaising the Standard of Excellence since 1911With over a century of proven excellence, StandardAero has become an industry leader in MRO services and customized solutions in the aerospace field. Our shared values and learning-based culture inspire our team to exceed their potential and power our customers' missions worldwide. With on-the-job training, advancement opportunities, and excellent benefits, StandardAero invites you to experience a fulfilling and meaningful career with us.Inclusivity Is Our StandardIt is StandardAero's policy to provide equal employment opportunities to all qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Our supportive environment celebrates diversity with no room for harassment or discrimination of any kind. We invite you to bring your authentic self to our team and experience our welcoming culture. #Standard Aero

Job Description SummaryAre you ready to innovate the future At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. We are looking for your talent and expertise to continue to transform flight as part of our GE9x team. Looking to impact aviation for years to come Your work on the GE9x engine will do just that, as you help build the most fuel-efficient engine in its class. You’ll be part of a team that embraces your drive, curiosity, unique ideas and perspectives. Join us and share in our pride and purpose that affects the lives of millions around the world. There has never been a better time to be part of our company and our culture and to see your career take flight!Job DescriptionRoles and ResponsibilitiesExecute the design, analysis, and evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirementsBasic understanding of key business drivers; uses this understanding to accomplish own work. Good understanding of how work of own team integrates with other teams and contributes to the area.Work with a variety of engineering organizations and contribute to the development of the engine systems and designs.Develop in-depth knowledge of the technical disciplinePrepare and present technical data to internal and external customersAssure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures.Resolves issues in situations within current technical knowledge base and judgment within established procedures. Consults more senior team members for issues outside of defined instructions/parameters.Be responsible for monitoring and communicating project status to Engineering leadership. Provide timely communications on significant issues or developments.Participate as a presenter in technical and program reviewsRequired QualificationsBachelor's degree in engineering from an accredited university or collegeMinimum of 3 additional years of experience in a relevant engineering positionDesired CharacteristicsFundamental understanding of turbomachinery designPrevious experience in design of Aviation componentsProficient with Ansys and UnigraphicsStrong technical aptitude, including applicable engineering tools and systemsAbility to communicate clearly and effectively within an organizationEstablished project management skillsDemonstrated ability to analyze and resolve problemsDocumented experience of being a self-starter with a passion for problem solving and driving solutionsActs as a resource for colleagues with less experienceHumble: respectful, receptive, agile, eager to learnTransparent: shares critical information, speaks with candor, contributes constructivelyFocused: quick learner, strategically prioritizes work, committedLeadership ability: strong communicator, decision-maker, collaborativeProblem solver: analytical-minded, challenges existing processes, critical thinker#LI-EDRICH #GE9XThis role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.Do you have an eye for detail and enjoy working with amazing products and tools Join us in championing and protecting explorers and heroes! As a Test Engineer at SNC, you will be using your skills and expertise to simulate, test, certify and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll develop complex test plans and procedures for a variety of systems to ensure the verification and validation of all product requirements. You will also be involved with the execution of the tests using top industry tools. As a cross functional engineer, you'll test system and component level new products and develop new test processes throughout the product lifecycle.The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries. https://www.sncorp.com/company/business-areas/Must-haves:Bachelor's of Science degree in Engineering or other related discipline and typically 2 or more years of experienceConceptualknowledge of engineering principles and practicesFamiliarityworking in multi-disciplinary designand development teamsKnowledge of requirements management, system design,and systems integrationExposure to planning, conducting and documenting Verification and Validation (V&V) activitiesThe ability to obtain and maintain a Top Secret U.S. Security Clearance is requiredPreferred:Experience with various testing equipment, standards, and methodologies to include manual and automated testingAbility to prepare complex and professional test plans, test procedures, and test reports in order to demonstrate compliance to system requirementsFamiliarity with Product and Quality Assurance principles and experienced in generation and disposition of product non-conformancesExperience performing certification testing for various certification organizations (i.e. FAA, NASA, DoD)Ability to read schematics, use service manuals, follow test procedures, and use logical trouble shooting techniquesBackground in the Aerospace and Defense IndustryAt Sierra Nevada Corporation (SNC) we deliver customer-focused technology and best-of-breed integrations in the aerospace and defense sectors. SNC has been honored as one of the most innovative U.S. companies in space, a Tier One Superior Supplier for the U.S. Air Force, and as one of America’s fastest-growing companies. Learn more about SNCSNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE: This position requires the ability to obtain and maintain a Top Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. Citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!

Job Description SummaryAre you ready to innovate the future At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. We are looking for your talent and expertise to continue to transform flight as part of our GE9x team. Looking to impact aviation for years to come Your work on the GE9x engine will do just that, as you help build the most fuel-efficient engine in its class. You’ll be part of a team that embraces your drive, curiosity, unique ideas and perspectives. Join us and share in our pride and purpose that affects the lives of millions around the world. There has never been a better time to be part of our company and our culture and to see your career take flight!Job DescriptionRoles and ResponsibilitiesExecute the design, analysis, and evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements.Basic understanding of key business drivers; uses this understanding to accomplish own work. Good understanding of how work of own team integrates with other teams and contributes to the area.Work with a variety of engineering organizations and contribute to the development of the engine systems and designs.Develop in-depth knowledge of the technical discipline.Prepare and present technical data to internal and external customers.Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures.Resolves issues in situations within current technical knowledge base and judgment within established procedures. Consults more senior team members for issues outside of defined instructions/parameters.Be responsible for monitoring and communicating project status to Engineering leadership. Provide timely communications on significant issues or developments.Participate as a presenter in technical and program reviews.Required QualificationsBachelor's degree in engineering from an accredited university or collegeMinimum of 3 additional years of experience in a relevant engineering positionDesired CharacteristicsFundamental understanding of turbomachinery designPrevious experience in design of Aviation componentsProficient with Ansys and UnigraphicsStrong technical aptitude, including applicable engineering tools and systemsAbility to communicate clearly and effectively within an organizationEstablished project management skillsDemonstrated ability to analyze and resolve problemsDocumented experience of being a self-starter with a passion for problem solving and driving solutionsActs as a resource for colleagues with less experienceHumble: respectful, receptive, agile, eager to learnTransparent: shares critical information, speaks with candor, contributes constructivelyFocused: quick learner, strategically prioritizes work, committedLeadership ability: strong communicator, decision-maker, collaborativeProblem solver: analytical-minded, challenges existing processes, critical thinker#LI-EDRICH#GE9XThis role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.Are you a bold thinker We dream big at SNCadvocating the exploration of space, keeping service members safe and creating the systems that keep our world united and sustain our way of living. Join our team! As a Systems Engineer, you will be using your skills and expertise to research, architect, model, simulate, test, certify and improve cutting edge products and services. You'll be developing complex system architectures within contextual modeling platforms, ushering them from operational concept through preliminary and detailed design, simulation, and test using progressive tools. As a cross-functional engineer, you are in charge of system-level ownership of new products and processes through the product lifecycle.The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries. Learn more about IASYou will be leading a Systems Safety team across the complete life cycle of a major aircraft modification program. This includes overseeing both FAA and Military Systems Safety arenas, being the subject matter expert for safety engineering design, and direct interaction and engagement with the customer.Responsibilities:Leading a team and advising Engineering on all aspects of Systems SafetyParticipating in customer meetings at the Senior Leadership levelStatus work activity as a Control Account ManagerCommunicating status of the system safety program to the customerPerforming qualitative and quantitative system safety analyses that fulfill customer requirementsMust-haves:Experience with systems safety processes, both civil and militaryExperience independently executing functional responsibilities for small to medium sized programsExperience applying MIL-STD-882E and/or ARP4761 or similar processes, like NASA/SP-2014-612, to the development of systems, hardware or softwareExperience with creation of a Hazard Tracking System (HTS), Functional Hazard Analysis (FHA), Fault Tree Analysis (FTA), Failure Modes and Effects Analysis (FMEA), System or Subsystem Hazard Analysis (SHA/SSHA), Common Cause Analysis (CCA), and the System Safety Assessment (SSA)Experience with qualitative and/or quantitative system safety analysisPreferred Skills:Previous leadership experience: exposure to recruiting employees including assigning, directing and evaluating their work and overseeing the development and maintenance of staff competenceAbility to independently execute functional responsibilities for large programsSoftware development or coding experienceExperience using DO-178 and/or DO-254 for design developmentExperience developing software system safety analysesExperience with agile developmentExperience with Model Based Systems Engineering (MBSE) using Cameo, Matlab / Simulink or similarExperience mitigating safety risk through design changes, fault detection, usage restrictions, and trainingExperience in aircraft systems developmentExperience writing analyses to meet regulation- or customer-driven requirementsExperience tailoring analyses or requirements to fit size, complexity, schedule, and budget of programAssociate Safety Professional (ASP) / Certified Safety Professional (CSP) certificate• Received certified System Safety training from APT Research, USC, or similarAt SNC we deliver customer-focused technology and best-of-breed integrations in the aerospace and defense sectors. SNC has been honored as one of the most innovative U.S. companies in space, a Tier One Superior Supplier for the U.S. Air Force, and as one of America’s fastest-growing companies. Learn more about SNCSNC offers annual incentive pay based upon performance that is commensurate with the level of the position.SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE:This position requires current/active Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. Citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!

Job Description SummaryAre you ready to innovate the future At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. We are looking for your talent and expertise to continue to transform flight as part of our GE9x team. Looking to impact aviation for years to come Your work on the GE9x engine will do just that, as you help build the most fuel-efficient engine in its class. You’ll be part of a team that embraces your drive, curiosity, unique ideas and perspectives. Join us and share in our pride and purpose that affects the lives of millions around the world. There has never been a better time to be part of our company and our culture and to see your career take flight!Job DescriptionRoles and ResponsibilitiesExecute the design, analysis, and evaluation of the Combustor Flow Path using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements.In-depth understanding of key business drivers; uses this understanding to accomplish own work. In-depth understanding of how work of own team integrates with other teams and contributes to the area.Prepare and present technical data to customers.Provide technical leadership and engineering support to team supporting the design.Document technical data generated by the assigned project consistent with engineering policies and procedures.Developing in-depth knowledge of a technical discipline. Uses prior experience and acquired technical expertise to execute policy/strategy.Provide timely communications on significant issues or developments.Participate on teams assigned to address organizational initiatives and generic issues.Participate as a presenter or reviewer in technical and program reviews.Prepare invention disclosures to protect the technology that provides a competitive advantage to the business.Required QualificationsBachelor of Science in Engineering from an accredited university or college.At least 5 years of experience in an engineering positionDesired CharacteristicsExtensive experience in the design, testing, and certification of turbine bladesAbility to communicate clearly and effectively with all levels of the organization.Demonstrated ability to analyze and resolve problems.Outstanding mentoring skills and a strong desire to help others succeed.#LI-EDRICH #GE9XThis role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes#LI-Remote - This is a remote position

SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.Are you ready to unleash your technical creativity Dream, Innovate, Inspire and Empower the next generation to transform humanity through technology and imagination! Electrical engineers at Sierra Nevada Corporation research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems.The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries. Learn more about IASMust-haves: Bachelor's of Science degree in Electrical Engineering or otherrelateddiscipline and typically 6 or more years of relevant experienceDemonstrated knowledge of engineering principles and practicesUnderstandingof Computer Aided Engineering toolsExperience working in multi-disciplinary design & development teamsPreferred: Exposure to simulations through functional and logical models and system analysisBackground in the Aerospace and Defense IndustryExperience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysisFamiliarity with design requirements related to High Intensity Radiated Field (HIRF) and Indirect Effects of Lightning (IEL)Knowledge of industry-standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing, and production processesFamiliar with Electro Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI)Experience in digital or analog circuit design and schematic captureUnderstanding of the printed circuit board layout process and toolsAt Sierra Nevada Corporation (SNC) we deliver customer-focused technology and best-of-breed integrations in the aerospace and defense sectors. SNC has been honored as one of the most innovative U.S. companies in space, a Tier One Superior Supplier for the U.S. Air Force, and as one of America’s fastest-growing companies. Learn more about SNCSNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE: This position requires the ability to obtain and maintain a Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!

Job Description SummaryAre you ready to innovate the future At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. We are looking for your talent and expertise to continue to transform flight as part of our GE9x team. Looking to impact aviation for years to come Your work on the GE9x engine will do just that, as you help build the most fuel-efficient engine in its class. You’ll be part of a team that embraces your drive, curiosity, unique ideas and perspectives. Join us and share in our pride and purpose that affects the lives of millions around the world. There has never been a better time to be part of our company and our culture and to see your career take flight!Job DescriptionRoles and ResponsibilitiesModule focal to lead efforts around product durability and validation. Recognize and complete validation activities, own repair substantiation efforts, define the leading indicator program and partner with PSE for implementation, and serve as the service focal for the module.Execute the design, analysis, and evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements.Basic understanding of key business drivers; uses this understanding to accomplish own work. Good understanding of how work of own team integrates with other teams and contributes to the area.Work with a variety of engineering organizations and contribute to the development of the engine systems and designs.Develop in-depth knowledge of the technical discipline.Prepare and present technical data to internal and external customers.Assure proper documentation of technical data generated for the assigned projects and/or tasks consistent with engineering policies and procedures.Resolves issues in situations within current technical knowledge base and judgment within established procedures. Consults more senior team members for issues outside of defined instructions/parameters.Be responsible for monitoring and communicating project status to Engineering leadership. Provide timely communications on significant issues or developments.Participate as a presenter in technical and program reviews.Required QualificationsBachelor's degree in engineering from an accredited university or collegeMinimum of 3 additional years of experience in a relevant engineering positionDesired CharacteristicsFundamental understanding of turbomachinery designPrevious experience in design of Aviation componentsProficient with Ansys and UnigraphicsStrong technical aptitude, including applicable engineering tools and systemsAbility to communicate clearly and effectively within an organizationEstablished project management skillsDemonstrated ability to analyze and resolve problemsDocumented experience of being a self-starter with a passion for problem solving and driving solutionsActs as a resource for colleagues with less experienceHumble: respectful, receptive, agile, eager to learnTransparent: shares critical information, speaks with candor, contributes constructivelyFocused: quick learner, strategically prioritizes work, committedLeadership ability: strong communicator, decision-maker, collaborativeProblem solver: analytical-minded, challenges existing processes, critical thinker#LI-EDRICH #GE9XThis role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.Are you ready to unleash your technical creativity Dream, Innovate, Inspire and Empower the next generation to transform humanity through technology and imagination! Electrical engineers at Sierra Nevada Corporation research, design, develop, test, certify, deploy and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll conceptualize and design new products and processes throughout the product lifecycle from analog and digital electronic circuit card assemblies to fully integrated systems.The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries. Learn more about IASMust-haves: Bachelor's of Science degree in Electrical Engineering or otherrelateddiscipline and typically 10 or more years of relevant experienceDemonstrated knowledge of engineering principles and practicesExperience with Computer Aided Engineering toolsProgressive experience working in multi-disciplinary designand development teamsExperience with extensive ground and flight test programsFamiliar with Ethernet, 1553, ARINC 429, and CAN bus protocolThe ability to obtain and maintain a Secret U.S. Security Clearance is requiredPreferred: Exposure to simulations through functional and logical models and system analysisBackground in the Aerospace and Defense IndustryExperience composing and analyzing Electrical Load Analysis (ELA), circuit modeling, simulation, and analysisFamiliarity with design requirements related to High Intensity Radiated Field (HIRF) and Indirect Effects of Lightning (IEL)Knowledge of industry-standard electrical design principles, to include, but not limited to model-based definition, electrical component selection, manufacturing, and production processesFamiliar with Electro Magnetic Effects (EME) to include, Electro Magnetic Compatibility (EMC) and Electro Magnetic Interference (EMI)Experience in digital or analog circuit design and schematic captureUnderstanding of the printed circuit board layout process and toolsExperience with designing and utilizing complex instrumentation data acquisition packagesExperience generating electrical and mechanical drawings for instrumentation installation activitySoftware development or coding experienceAt Sierra Nevada Corporation (SNC) we deliver customer-focused technology and best-of-breed integrations in the aerospace and defense sectors. SNC has been honored as one of the most innovative U.S. companies in space, a Tier One Superior Supplier for the U.S. Air Force, and as one of America’s fastest-growing companies. Learn more about SNCSNC offers annual incentive pay based upon performance that is commensurate with the level of the position.SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE:This position requires the ability to obtain and maintain a Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!

Job Description SummaryAre you ready to innovate the future At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. We are looking for your talent and expertise to continue to transform flight as part of our GE9X team. Looking to impact aviation for years to come Your work on the GE9X engine will do just that, as you help build the most fuel-efficient engine in its class. You’ll be part of a team that embraces your drive, curiosity, unique ideas and perspectives. Join us and share in our pride and purpose that affects the lives of millions around the world. There has never been a better time to be part of our company and our culture and to see your career take flight!The GE9X Lifecycle Engineering Cost & Ramp team is responsible for the cost attainment and ramp execution as our product line prepares for Entry into Service in 2025. The Cold Section team is responsible for the fan, high pressure compressor, and mechanical systems hardware, and this role will be aligned by commodity across modules, providing a breadth of opportunity for this role to contribute to the product outcomes.In this role, you will have some autonomy to focus on the execution of activities within an operating discipline covered by standard functional practices and procedures. As the lead engineer on the Cold Section team, your judgement will be paramount in the success of the desired team outcomes which will require you to have the ability to propose different solutions outside of set parameters with advice from your peers.A job at this level you will work closely with cross functional partners to develop in-depth knowledge and expertise to make technically sound decisions with some level of evidence. You will act in the capacity of an individual contributor with proven interpersonal skills, execute the design, analysis, or evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements.Job DescriptionRoles and ResponsibilitiesExecute the design, analysis, or evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements. This work would include mechanical and/or electrical engineering for all productsDeveloping in-depth knowledge of a technical discipline. Uses prior experience and acquired technical expertise to execute policy/strategy.In-depth understanding of key business drivers; uses this understanding to accomplish own work. In-depth understanding of how work of own team integrates with other teams and contributes to the area.Uses some level of judgment and has ability to propose different solutions outside of set parameters but with guidance. Uses prior experience and on-the-job training to solve straightforward tasks. Has access to technical skills and analytic thinking required to solve problems. May use multiple internal sources outside of own team to arrive at decisionsThis role may transition to Production Technologies as each Part Family achieves design maturity and configuration stability.Required QualificationsBachelors of Science degree in engineering from an accredited university or collegeMinimum of 3 years of experience in design engineeringDesired CharacteristicsStrong oral and written communication skills.Demonstrated ability to analyze and resolve problems.Ability to document, plan, market, and execute programs.#LI-PE1#GE9XThis role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.Do you have an eye for detail and enjoy working with amazing products and tools Join us in championing and protecting explorers and heroes! As a Test Engineer at SNC, you will be using your skills and expertise to simulate, test, certify and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll develop complex test plans and procedures for a variety of systems to ensure the verification and validation of all product requirements. You will also be involved with the execution of the tests using top industry tools. As a cross functional engineer, you'll test system and component level new products and develop new test processes throughout the product lifecycle.The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries. Learn more about IASMust-haves:Bachelor's of Science degree in Engineering or other related discipline and typically10 or more years of experienceThorough understanding of engineering principles and practicesExperienceworking in multi-disciplinary designand development teamsAdvanced Knowledge of requirements management, system design, and systemsintegrationDemonstrated experience planning, conducting and documenting Verification and Validation (V&V) activitiesThe ability to obtain and maintain a Secret U.S. Security Clearance is requiredPreferred:Experience with various testing equipment, standards, and methodologies to include manual and automated testingAbility to prepare complex and professional test plans, test procedures, and test reports in order to demonstrate compliance to system requirementsFamiliarity with Product and Quality Assurance principles and experienced in generation and disposition of product non-conformancesExperience performing certification testing for various certification organizations (i.e. FAA, NASA, DoD)Ability to read schematics, use service manuals, follow test procedures, and use logical trouble shooting techniquesBackground in the Aerospace and Defense IndustryAt Sierra Nevada Corporation (SNC) we deliver customer-focused technology and best-of-breed integrations in the aerospace and defense sectors. SNC has been honored as one of the most innovative U.S. companies in space, a Tier One Superior Supplier for the U.S. Air Force, and as one of America’s fastest-growing companies. Learn more about SNCSNC offers annual incentive pay based upon performance that is commensurate with the level of the position.SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE:This position requires the ability to obtain and maintain a Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!

Job Description SummaryAre you ready to innovate the future At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. We are looking for your talent and expertise to continue to transform flight as part of our LEAP engineering team. Looking to impact aviation for years to come Your work on the CFM LEAP engine will do just that, as you help set a new standard in utilization, reliability and performance. You’ll be part of a team that embraces your drive, curiosity, unique ideas and perspectives. Join us and share in our pride and purpose that affects the lives of millions around the world. There has never been a better time to be part of our company and our culture and to see your career take flight!Job DescriptionJob Title: Staff Mechanical Design Engineer, High Pressure Turbine (HPT) - LEAP Engine ProgramRole Summary/Purpose: Ready to take the LEAP to GE Aerospace Are you an experienced mechanical design engineer ready to join a team working on the fastest growing engine in aviation history The GE Aerospace Engineering Team needs you! The LEAP engine is a culmination of cutting-edge technology, world-class reliability and unparalleled performance, and is the engine of choice to power the Airbus A320neo, the Boeing 737 MAX, and the COMAC C919 jet airliners.Why is this technology the engine of choice LEAP's 15% reduction in fuel burn (over prior generation of narrowbody applications) is moving the needle on sustainability today and proving out the next generation of sustainable technologies like ceramic composites, advanced turbine cooling, and additive manufacturing.Our LEAP engine incorporates some of GE's latest technological innovations which are challenging our engineers to test the limits of what is possible and define non-traditional design solutions that keep GE Aerospace at the forefront of innovation.Bring your talent to our team where you will be part of the LEAP Engineering Design organization in Cincinnati, Ohio. You will help us leverage operational judgement, technical expertise and leadership skills on turbine machinery design and product improvement activities that ultimately power our customers, lift people up and bring them home safely.This role could have opportunities for across module integration within the High Pressure Turbine module design sub-teams (Airfoils, rotating parts & structures).What are the responsibilities The Senior Staff Mechanical Design Engineer:Executes, provides guidance, and collaborates with GE Technical Experts on the design, analysis, and evaluation of design projects using sound engineering principles and adhering to business standards, practices, procedures, and LEAP product / program requirementsDocuments, prepares and presents technical data and results in technical program reviews and internal and external customersDemonstrates in-depth understanding of key business drivers; uses this understanding to accomplish own work as well as mentor othersProvides timely communications to team members on significant issues or developments and promote open dialogueWorks on teams to lift up and support organizational initiativesRequired Qualifications:Bachelor’s Degree in Engineering from an accredited college or universityAt least 5 years experience in an engineering design positionDesired Characteristics:Demonstrated expertise in turbomachinery mechanical designSignificant experience in the design, testing, and certification of turbomachineryStrong technical aptitude, including applicable engineering tools and principlesAbility to communicate clearly and effectively with all levels of the organization and provide guidance to engineers with less experienceDemonstrated ability to analyze and resolve problems with a sense of urgency#LI-EDRICH#LEAPThis role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.Do you have an eye for detail and enjoy working with amazing products and tools Join us in championing and protecting explorers and heroes! As a Test Engineer at SNC, you will be using your skills and expertise to simulate, test, certify and improve cutting edge products and services. These cover a very wide range from advanced mission payloads and electronic systems through highly integrated aircraft to orbital and space exploration systems. You'll develop complex test plans and procedures for a variety of systems to ensure the verification and validation of all product requirements. You will also be involved with the execution of the tests using top industry tools. As a cross functional engineer, you'll test system and component level new products and develop new test processes throughout the product lifecycle.The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries. Learn more about IASMust-haves:Bachelor's of Science degree in Engineering or other related discipline and typically5 or more years of experienceKnowledge of engineering principles and practicesExperience working in multi-disciplinary designand development teamsKnowledge of requirements management, system design,and systems integrationExperience withplanning, conducting and documenting Verification and Validation (V&V) activitiesThe ability to obtain and maintain a Secret U.S. Security Clearance is requiredPreferred:Experience with various testing equipment, standards, and methodologies to include manual and automated testingAbility to prepare complex and professional test plans, test procedures, and test reports in order to demonstrate compliance to system requirementsFamiliarity with Product and Quality Assurance principles and experienced in generation and disposition of product non-conformancesExperience performing certification testing for various certification organizations (i.e. FAA, NASA, DoD)Ability to read schematics, use service manuals, follow test procedures, and use logical trouble shooting techniquesBackground in the Aerospace and Defense IndustryAt Sierra Nevada Corporation (SNC) we deliver customer-focused technology and best-of-breed integrations in the aerospace and defense sectors. SNC has been honored as one of the most innovative U.S. companies in space, a Tier One Superior Supplier for the U.S. Air Force, and as one of America’s fastest-growing companies. Learn more about SNCSNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE: This position requires the ability to obtain and maintain a Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!

SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.Are you looking to use your engineering capabilities, project management and collective skills in your next position We could use your expertise on our team! We are innovators on a mission to unify, explore and inspire. As a Project Engineering Manager I, you'll implement an integrated plan for product development including coordinating activities throughout the product lifecycle from design concept phase to release. You will monitor the product/program/project from initiation through delivery, interfacing with external customers or field-based employees on technical matters, as needed. You'll also review, manage, proactively challenge, and control status of project programs and budgets, manage schedules and prepare status reports, and guide and lead teams in achieving the goals of the program including issue identification, resolution and contingency planning.The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries. https://www.sncorp.com/company/business-areas/Must-haves:Bachelor's of Science degree in a related field of study and typically 8 or more years of technical experienceKnowledge of engineering principles and practiceExperience working in multi-disciplinary design and development teamBasic understanding of requirements management, system design, integrationThe ability to obtain and maintain a Top Secret U.S. Security Clearance is requiredPreferred:Typically 2-4 years of relevant leadership and/or project management experienceExperience managing flight test programs to include: test plan/procedure developments, execution, and reportingExperience leading a cross-functional team and communicating with program management and customersFamiliarity with development and execution of program cost and schedule management to include control account management functionsAbility to read and interpret technical drawings and schematics, parts lists, specifications, instructions and test proceduresExperience in FAA and Military aircraft certification effortsBackground in the Aerospace and Defense IndustryAt Sierra Nevada Corporation (SNC) we deliver customer-focused technology and best-of-breed integrations in the aerospace and defense sectors. SNC has been honored as one of the most innovative U.S. companies in space, a Tier One Superior Supplier for the U.S. Air Force, and as one of America’s fastest-growing companies. Learn more about SNCSNC offers annual incentive pay based upon performance that is commensurate with the level of the position.SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE:This position requires the ability to obtain and maintain a Top Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. Citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!

Job Description SummaryThis role is within the GE Aerospace Additive Design team. The team is responsible for the technical maturation of state-of-the-art additively manufactured components that will be used in GE’s commercial products, including technology development as a part of the CFM RISE program. As the Lead Engineer, you will play a key role in supporting and leading efforts focused on the design and testing of our next generation additively manufactured parts. You will be responsible as an individual contributor to drive design and manufacturing changes to meet program requirements, collaborating with cross-functional teams including mechanical design and analysis, thermal design, materials engineering, manufacturing, quality, and program management. You will need to implement lessons learned from other programs and assist in continuing to build out GE’s expertise in additive processes. Other responsibilities for this role may include supporting component delivery efforts, leading technical maturation testing activities, and improving component producibility through design and manufacturing changes.Your previous experiences will be fundamental in iterating on existing processes and designs. In this position, you will have some level of autonomy, working directly with your team lead. You will be required to take ownership of the quality of your work and contribute input into setting your priorities. While executing tasks, you will need to assess your capabilities and seek guidance from your supervisor and technical mentors when necessary.This role presents an exciting opportunity to make significant impact on the design and innovation of GE Aerospace’s products.Job DescriptionEssential Responsibilities:Lead the execution of critical testing of additive components and adhering to business standards, practices, procedures, and product / program requirements. Act as interface between mechanical design, manufacturing, and systems engineering teams.Learn to own critical TRL6 engine testing, learning how to perform the functions of an engine owner. Coordinate all functions through testing lifecycle across the engine design team, systems team, and testing team.Build specialized knowledge in testing from technology readiness level (TRL) 2 through TRL4 for turbine components. Be the critical interface between the mechanical design, thermal design, materials, and manufacturing teams in testing activities. Coordinate activities across teams, develop requirements for testing, organize delivery of hardware, and prioritize design/testing across a variety of projects.Develop specialized knowledge of additive design and module integration. Have awareness as to how work of own team contributes to our commercial programs, future programs, and the Additive integrated product team. Foster awareness of market trends, competition, and how products are differentiated. Serve as a resource for executing best practices and delivering work considered high quality.Use judgment to make decisions or solve moderately complex tasks or problems in areas component design, manufacturing, and program management. May use multiple internal and limited external sources outside of own team to arrive at decisions.Lead teams through completion of complex deliverables. Develop and communicate schedules, project status, and delegate tasks appropriately to cross functional teams. Collaborate with quality engineering, manufacturing engineering, materials engineering, and the systems engineering teams to address challenges and execute on solutions.Engage with supply chain on the industrialization of components produced using additive manufacturing. Be connected to the details of the additive manufacturing process and work closely with the team at our development facilities.Qualifications/Requirements:Bachelor of Science in Mechanical Engineering, Aerospace Engineering, Materials Engineering, or related STEM field from an accredited university and 3+ years prior relevant engineering experience,ORan Advanced degree in Mechanical Engineering, Aerospace Engineering, Materials Engineering, or related STEM field from an accredited university and 2+ years prior relevant engineering experience.Desired Characteristics:Strong interpersonal and leadership skills; experience in influencing and working on small teams with a flexible, friendly attitudeTechnical depth in additive manufacturing; proven experience collaborating with manufacturing counterpartsExperience in the design of gas turbine engines and gas turbine engine componentsProficiency in CAD software (Unigraphics NX), GD&T, and with stress analysis software (ANSYS, etc.)Proven ability to coordinate multiple projects simultaneouslyExcellent communication and technical documentation skillsAbility to mentored in resolving complex problemsKeen listener and innate drive to succeed.This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here.Are you looking to use your engineering capabilities, project management and collective skills in your next position We could use your expertise on our team! We are innovators on a mission to unify, explore and inspire. As a Project Engineering Manager II, you'll assist in developing and implementing integrated plans for product development including coordinating activities throughout the product lifecycle from design concept phase to release. You will monitor the product/program/project from initiation through delivery, interfacing with external customers or field-based employees on technical matters, as needed. You'll also review, manage, proactively challenge, and control status of project programs and budgets, manage schedules and prepare status reports, and guide and lead teams in achieving the goals of the program including issue identification, resolution and contingency planning.The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries. https://www.sncorp.com/company/business-areas/Must-haves:Bachelor's of Science degree in a related field of study and typically 10 or more years of technical experienceThorough knowledge of engineering principles and practiceExperience working in multi-disciplinary design and development teamDetailedunderstanding of requirements management, system design, integrationThe ability to obtain and maintain a Top Secret U.S. Security Clearance is requiredPreferred:Typically 2-4 years of relevant leadership and/or project management experienceExperience managing flight test programs to include: test plan/procedure developments, execution, and reportingExperience leading a cross-functional team and communicating with program management and customersFamiliarity with development and execution of program cost and schedule management to include control account management functionsAbility to read and interpret technical drawings and schematics, parts lists, specifications, instructions and test proceduresExperience in FAA and Military aircraft certification effortsBackground in the Aerospace and Defense IndustryAt Sierra Nevada Corporation (SNC) we deliver customer-focused technology and best-of-breed integrations in the aerospace and defense sectors. SNC has been honored as one of the most innovative U.S. companies in space, a Tier One Superior Supplier for the U.S. Air Force, and as one of America’s fastest-growing companies. Learn more about SNCSNC offers annual incentive pay based upon performance that is commensurate with the level of the position.SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more.IMPORTANT NOTICE:This position requires the ability to obtain and maintain a Top Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. Citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use.Learn more about the background check process for Security Clearances.SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team!

Job Description SummaryExpand the horizons of your career and bring your talents to GE Aerospace. With a legacy of more than 100 years of being a world-leading provider of jet and turboprop engines, as well as integrated systems for commercial, military, business and general aviation aircraft, there is a role for you with us.We are passionate about transforming the future of flight, and we need those innovators who are committed to making it happen every day. The future of aviation depends on solving today’s challenges while facing tomorrow’s realities. GE Aerospace is looking for those individuals who are ready to develop ground-breaking innovations while still providing our customers what they need today.And, at GE Aerospace, we welcome diversity of thought to foster inclusion, drive creativity and power innovation. When everyone can bring their best, whole selves to work, we are stronger for it. Integrity and respect are at our core, and we welcome people with varied backgrounds and experiences.Can you help us innovate Are you committed to lifting people up and bringing them home safely through state-of-the-art engineering Are you ready to define the next industry-disruptive technology to transform flight If so, then you belong here. See your career take flight at GE Aerospace. Join us. ____________________________________________The GE Aerospace Engineering Team is looking for experienced design engineers who are ready to work on the fastest growing engine in Aviation history, LEAP. The LEAP engine is a culmination of cutting-edge technology, world-class reliability and unparalleled performance, and is the engine of choice to power the Airbus A320neo, the Boeing 737 MAX, and the COMAC C919. LEAP's 15% reduction in fuel burn (over prior generation of narrowbody applications) is moving the needle on sustainability today and proving out the next generation of sustainable technologies like ceramic composites, advanced turbine cooling, and additive manufacturing.Our LEAP engine incorporates some of GE's latest technological innovations which are challenging our engineers to test the limits of what is possible and define non-traditional design solutions that keep GE Aerospace at the forefront of innovation. The Lead Thermal Design Engineer will be part of the LEAP Engineering Design Team in Cincinnati, OH. They will refine technical expertise and leadership skills by working turbomachinery design and product improvement activities that ultimately power our customers, lift people up and bring them home safely.Job DescriptionRoles and ResponsibilitiesExecute, with guidance from senior engineering resources, the analysis, design, test, or integration required to design and support engine components, assemblies or systems that meet business standards and LEAP product / program requirements.Develop in-depth knowledge in turbomachinery while using prior experience and acquired technical expertise to execute in consistency with engineering policies and proceduresUse interpersonal skills to collaborate with peers and provide direction and mentoring to new team membersDocument and communicate results of technical data generatedPrepare and present technical data to support internal and external customers; participate as a presenter or reviewer in technical and program reviewsShare engineering information, promote open dialogue, and provide timely communications on significant issues or developmentsRequired QualificationsBachelor’s Degree in Engineering from an accredited college or universityAt least 3 additional years of experience in an engineering design positionDesired CharacteristicsDemonstrated experience in component designPositive, motivated, quick learner who has a passion for the aerospace industry, our customers, and our productsFamiliarity with design, test and analysis tools and systemsDemonstrated ability to analyze and resolve problemsStrong oral, written, interpersonal and leadership skillsAbility to lead initiative of moderate scope and impactEstablished project management skills and ability to coordinate several projects simultaneouslyThis role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description SummaryExpand the horizons of your career and bring your talents to GE Aerospace. With a legacy of more than 100 years of being a world-leading provider of jet and turboprop engines, as well as integrated systems for commercial, military, business and general aviation aircraft, there is a role for you with us.We are passionate about transforming the future of flight, and we need those innovators who are committed to making it happen every day. The future of aviation depends on solving today’s challenges while facing tomorrow’s realities. GE Aerospace is looking for those individuals who are ready to develop ground-breaking innovations while still providing our customers what they need today.And, at GE Aerospace, we welcome diversity of thought to foster inclusion, drive creativity and power innovation. When everyone can bring their best, whole selves to work, we are stronger for it. Integrity and respect are at our core, and we welcome people with varied backgrounds and experiences.Can you help us innovate Are you committed to lifting people up and bringing them home safely through state-of-the-art engineering Are you ready to define the next industry-disruptive technology to transform flight If so, then you belong here. See your career take flight at GE Aerospace. Join us. _________________________________________________The GE Aerospace Engineering Team is looking for experienced thermal design engineers who are ready to work on the fastest growing engine in Aviation history, LEAP. The LEAP engine is a culmination of cutting-edge technology, world-class reliability and unparalleled performance, and is the engine of choice to power the Airbus A320neo, the Boeing 737 MAX, and the COMAC C919. LEAP's 15% reduction in fuel burn (over prior generation of narrowbody applications) is moving the needle on sustainability today and proving out the next generation of sustainable technologies like ceramic composites, advanced turbine cooling, and additive manufacturing. Our LEAP engine incorporates some of GE's latest technological innovations which are challenging our engineers to test the limits of what is possible and define non-traditional design solutions that keep GE Aerospace at the forefront of innovation. The Staff Thermal Design Engineer will be part of the LEAP Engineering Design Team in Cincinnati, OH. They will leverage operational judgement, technical expertise and leadership skills on turbomachinery design and product improvement activities that ultimately power our customers, lift people up and bring them home safely.Job DescriptionEssential ResponsibilitiesThe Staff Thermal Design Engineer will:Execute, provide guidance, and collaborate with GE Technical Experts on the design, analysis, and evaluation of design projects using sound engineering principles and adhering to business standards, practices, procedures, and LEAP product / program requirementsDocument, prepare and present technical data and results in technical program reviews and internal and external customers.In-depth understanding of key business drivers; uses this understanding to accomplish own work as well as mentor othersProvide timely communications to team members on significant issues or developments and promote open dialogueWork on teams to lift up and support organizational initiativesQualifications/RequirementsBachelor’s Degree in Engineering from an accredited college or universityAt least 5 years experience in an engineering positionDesired CharacteristicsDemonstrated expertise in turbomachinery thermal designSignificant experience in the design, testing, and certification of turbomachineryStrong technical aptitude, including applicable engineering tools and principlesAbility to communicate clearly and effectively with all levels of the organization and provide guidance to engineers with less experienceDemonstrated ability to analyze and resolve problems with a sense of urgency#LI-EDRICH#LEAPThis role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description SummaryCan you help us innovate Are you committed to lifting people up and bringing them home safely through state-of-the-art engineering Are you ready to define the next industry-disruptive technology to transform flight If so, then you belong here. See your career take flight at GE Aerospace. Join us.Job DescriptionRole Summary/PurposeThe GE Aerospace Engineering Team is looking for experienced mechanical design engineers who are ready to work on the fastest growing engine in Aviation history, LEAP. The LEAP engine is a culmination of cutting-edge technology, world-class reliability and unparalleled performance, and is the engine of choice to power the Airbus A320neo, the Boeing 737 MAX, and the COMAC C919.LEAP's 15% reduction in fuel burn (over prior generation of narrowbody applications) is moving the needle on sustainability today and proving out the next generation of sustainable technologies like ceramic composites, advanced turbine cooling, and additive manufacturing.Our LEAP engine incorporates some of GE's latest technological innovations which are challenging our engineers to test the limits of what is possible and define non-traditional design solutions that keep GE Aerospace at the forefront of innovation.The Lead Mechanical Design Engineer will be part of the LEAP Engineering Design Team in Cincinnati, OH. They will refine technical expertise and leadership skills by working turbomachinery design and product improvement activities that ultimately power our customers, lift people up and bring them home safely.Essential ResponsibilitiesExecute, with guidance from senior engineering resources, the analysis, design, test, or integration required to design and support engine components, assemblies or systems that meet business standards and LEAP product / program requirements.Develop in-depth knowledge in turbomachinery while using prior experience and acquired technical expertise to execute in consistency with engineering policies and proceduresUse interpersonal skills to collaborate with peers and provide direction and mentoring to new team membersDocument and communicate results of technical data generatedPrepare and present technical data to support internal and external customers; participate as a presenter or reviewer in technical and program reviewsShare engineering information, promote open dialogue, and provide timely communications on significant issues or developmentsQualifications/RequirementsBachelor’s Degree in Engineering from an accredited college or universityAt least 3 additional years of experience in an engineering design positionDesired CharacteristicsDemonstrated experience in component designPositive, motivated, quick learner who has a passion for the aerospace industry, our customers, and our productsFamiliarity with design, test and analysis tools and systemsDemonstrated ability to analyze and resolve problemsStrong oral, written, interpersonal and leadership skillsAbility to lead initiative of moderate scope and impactEstablished project management skills and ability to coordinate several projects simultaneously#LI-EDRICH#LEAPThis role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description SummarySystems engineering is a cross-functional engineering discipline centered on an approach, mindset, and process. All activities that consider both the business and the technical needs of the customers with the goal of providing a quality product that meets the users needs.This position is for GE90 Product line. The systems engineer will be responsible to support the GE90 fleet, leading/supporting field problem resolution, and work with regulators on engine level system issues.Job DescriptionRoles and ResponsibilitiesAs the Systems Engineer, you will:Provide technical guidance on performance, software, control system, engine parameters etc. to GE90 Systems and Design Engineering. Work with regulators and customer as needed.Work closely with the fleet support and product support team to support GE90 base and growth fleet for engine level issues.Lead/Mentor US and global design and product support team to support GE90 production, repair and/or field plan.Drive root cause and containment for field issues.Support Product Line and Design Team to ensure rapid resolution of quality and delivery issuesUses high level of judgment to make decisions and handle complex tasks or problems in areas of operational, product management, manufacturing, technology or engineering. Has ability to assess quality of information given and ask pertinent questions to stakeholders. Able to offer new solutions to problems outside of set parameters and is able to construct and provide recommendations.May lead functional teams or projects with minimal resource requirements, risk, and/or complexity. Communicates difficult concepts and may influence others' options on particular topics. May guide others to consider a different point of view.Participate in cross-functional projects and present outcomes to business leaders around part certification, as neededRequired QualificationsBachelor degree in Engineering from an accredited college or universityMinimum of 8 years' experience in advanced engine design or engine systems integrationDesired CharacteristicsMaster'sDegreeinEngineeringfromanaccredited collegeoruniversity.Prior systems integration, performance or SPOCT experiencePrior hardware owner, understanding of Cert/CID process.Prior PSE, understanding of ICA processDemonstrated ability to analyze and resolve problems. Demonstrated ability to lead programs / projects.Ability to document, plan, market, and execute programs.Established project management skills. Ability to coordinate several projects simultaneously.Ability to work on continuous improvement of processes, including TOPS8D, manufacturing program, product change management (Tollgate), Safety and Quality.Knowledgeofmechanicaldesignandassemblyprocedures.Interest in being a self-starter with a focus on problem solving and driving solutions.Strong oral and written communication skills.Strong interpersonal and leadership skills.#LI-EDRICHThis role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description SummaryThis job is for a Systems Engineer for the LM2500 engine line. The LM2500 is an industrial and marine variant of the aircraft engine CF6-80C2 that has been modified for to power oil & gas and electrical applications. The Senior Staff Engineer - Systems Engineer will be the engineering leader for LM2500 programs including new product introduction, cost out, reliability improvements, engine delivery and root cause investigations of field issues. You will be responsible for establishing requirements, developing engineering plans to substantiate design changes to meet these requirements, and then leading the engineering teams through execution. This includes the engine level engineering integration and customer communications.Job DescriptionEssential Responsibilities:There are many LM2500 engine models that have evolved over the platforms 40+ year history that span multiple power ratings, dry and wet combustor operation, gas and liquid fuel operation and different compressor and power turbine configurations.The Senior Staff Engineer will need to grasp the breadth of our product offerings and provide guidance to the design, manufacturing, instrumentation, test and business teams.Responsibilities include:Mentor global design teams and hold them accountable to deliverablesSupport design reviewsActively drive technical excellence and learning throughout the organizationDrive root cause and containment for field issues.Develop expertise around unique design difference that have originated from our niche market.Support engine assembly by quickly resolving technical issuesDetermine and document instrumentation requirements for engineExecute overall engine test plans.Ensure proper use of engineering standard tools and adherence to GE Toll Gate process.Support other GE businesses, internal and external customers, and suppliers as requiredProvide technical consultation to cross-functional teams throughout the business to improve or resolve manufacturing, product center, supplier, or field issuesEffectively communicate and provide recommendations through the analysis, preparation and presentation of technical data to internal and external GE customers using reports, records, and lettersQualifications/Requirements:Bachelor's degree in engineering from an accredited university or collegeMinimum of 5 years of experience in advanced engine design or engine systems integrationDesired Characteristics:A minimum of 8 years of experience in an engineering positionSystems Engineering experience with GTEsEngine test experience with GTEsStrong organizational skills with demonstrated ability to manage projects and operational processStrong oral and written communication skillsAbility to guide and influence othersIn-depth understanding of engineering technology and toolsThis role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description SummaryThis role is within the GE Aerospace Additive Design team. The team is responsible for the design, method development, and technical maturation of state-of-the-art additively manufactured components that will be used in GE’s commercial products, including technology development as a part of the CFM RISE program. As the Lead Engineer, you will play a key role in supporting and leading efforts focused on the design and testing of our next generation additively manufactured parts. You will be responsible as an individual contributor to drive design and manufacturing changes to meet program requirements, collaborating with cross-functional teams including mechanical design and analysis, thermal design, materials engineering, manufacturing, quality, and program management. You will need to implement lessons learned from other programs and assist in continuing to build out GE’s expertise in additive processes. Other responsibilities for this role may include supporting component delivery efforts, leading technical maturation testing activities, and improving component producibility through design and manufacturing changes.Your previous experiences will be fundamental in iterating on existing processes and designs. In this position, you will have some level of autonomy, working directly with your team lead. You will be required to take ownership of the quality of your work and contribute input into setting your priorities. While executing tasks, you will need to assess your capabilities and seek guidance from your supervisor and technical mentors when necessary.This role presents an exciting opportunity to make significant impact on the design and innovation of GE Aerospace’s products.Job DescriptionEssential Responsibilities:As a Design Engineer, you will:Execute the mechanical design, analysis, and evaluation of hardware produced using additive manufacturing with sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements. Act as interface between mechanical design, manufacturing, and systems engineering teams.Develop specialized knowledge of additive design and module integration. Have awareness as to how work of own team contributes to our commercial programs, future programs, and the Additive integrated product team. Foster awareness of market trends, competition, and how products are differentiated. Serve as a resource for executing best practices and delivering work considered high quality.Use judgment to make decisions or solve moderately complex tasks or problems in areas component design, manufacturing, and program management. May use multiple internal and limited external sources outside of own team to arrive at decisions.Lead small teams through completion of deliverables. Communicate schedule pressures and delegate tasks appropriately to cross functional teams. Collaborate with quality engineering, manufacturing engineering, materials engineering, and the systems engineering teams to address challenges and execute on solutions.Engage with supply chain on the industrialization of components produced using additive manufacturing. Be connected to the details of the additive manufacturing process and work closely with the team at our development facilities.Qualifications/Requirements:Bachelor of Science in Mechanical Engineering, Aerospace Engineering, Materials Engineering, or related STEM field from an accredited universityMinimum of 3 years prior relevant engineering experience in design engineeringDesired Characteristics:Strong interpersonal and leadership skills; experience in influencing and working on small teams with a flexible, friendly attitudeTechnical depth in additive manufacturing; proven experience collaborating with manufacturing counterpartsExperience in the design of gas turbine engines and gas turbine engine componentsProficiency in CAD software (Unigraphics NX), GD&T, and with stress analysis software (ANSYS, etc.)Proven ability to coordinate multiple projects simultaneouslyExcellent communication and technical documentation skillsAbility to mentored in resolving complex problemsKeen listener and innate drive to succeed.This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description SummaryThis Lead Engineer design position will integrate advanced mechanical design concepts and state-of-the-art additive manufacturing techniques to mature novel designs, materials, and processes for the design of turbine blade airfoils for application in a GE Edison Works Advanced Military Engine New Product Initiative (NPI) Program. This role will report to the engine program turbine module design manager and also serve as an "engineer-in-shop" within GE Aerospace's Advanced Technology organization at the West Chester, OH site. In this design manufacturing integration role, the engineer will work within the turbine blade design team to demonstrate technical solutions that meet program requirements and milestones. This role will deliver significant impact to both short term and long term business goals.This is an ideal role for someone looking to build a strong career foundation in mechanical design, additive design, work alongside a vibrant and energetic design team, and create the future of flight.Job DescriptionRoles and ResponsibilitiesAs a Design Engineer, you will:Be on the leading edge of advanced turbine airfoil design, materials, additive methods, and casting paradigms.Execute the mechanical design, analysis, and evaluation of hardware produced using additive manufacturing.Apply best practices in hardware design and integrate with adjacent hardware and the engine system.Work to ensure Safety, Quality, Delivery, and Cost (SQDC) while applying scientific principles, engineering tools, and lean methods.Support and execute on technical roadmaps or test plans that expand design, material, and process capabilities and limits. Follow, improve, and invent standards to ensure quality results.Support and contribute to producibility evaluations including reviews and establishment of best practices. Assist in defining requirements for producible designs.Manage project schedules across a cross-functional team.Coordinate cross-functional projects and present outcomes to technical and business leaders.Engage with supply chain on the industrialization of components produced using additive manufacturing.Maintain awareness of the competitive landscape and the factors that differentiate your technology area.Be connected to the details of the additive manufacturing process and work closely with the team at our development facilities. Document lessons and new standards in the established archival systems.Participate in program reviews and prepare invention disclosures where appropriate.Required QualificationsBachelor's degree in Engineering, preferably Mechanical or Aerospace Engineering, from an accredited university or college.Minimum of 3 years' experience in design engineeringRelevant experience in design engineering, materials science and engineering, process development, and/or industry Able to work in-person and on-site (not virtual or remote) >75% of the timeSome local travel between sites will be requiredAbility obtain and maintain a US Government Security Clearance at the SECRET level.Desired Characteristics3 years or more experience in materials engineering, application, or manufacturing process development.Experience with design or development for turbomachinery hot section componentsDemonstrated GD&T experience Technical depth in additive manufacturingComfortable working hands-on in development lab, manufacturing pilot line, or full rate production environments Established project management skills.Proven facilitation and collaboration skills.Flexible and friendly approach to working in teams.Interest in being a self-starter with your eye constantly on problem solving and drivingsolutions.Highly-motivated, passionate and exceptional communication skills .The ability to work independently, yet the courage and inclusiveness to ask questions of others when help is needed or a problem arises.Keen listener and innate drive to succeed.Additional Eligibility Qualifications :GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). This role is restricted to U.S. persons (i.e., U.S. citizens, permanent residents, and other protected individuals under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)) due to access to export-controlled technology. GE will require proof of status prior to employment.This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description SummaryThis role is within the GE Aerospace Additive Design team. The team is responsible for the design, method development, and technical maturation of state-of-the-art additively manufactured components that will be used in GE’s commercial products, including technology development as a part of the CFM RISE program. As the Staff Engineer, you will serve as the lead for projects focused on the design and testing of our next generation additively manufactured parts. Your responsibilities will involve organizing and collaborating with cross-functional teams, including mechanical design and analysis, thermal design, materials engineering, data science, manufacturing, quality, and program management. You will serve as a project manager and technical mentor for a small team of mechanical design engineers, and you will be accountable to driving milestone completion. Other responsibilities for this role may include supporting component delivery efforts, leading technical maturation testing activities, and improving component producibility through design and manufacturing changes.Your technical expertise will be crucial in iterating on existing processes and design, while also providing mentorship to early-career individuals in engineering. In this position, you will have a moderate level of autonomy, which will require high levels of operational judgement. As the Staff Engineer, you will contribute significant input into setting your priorities and the priorities of the team. While executing tasks, you will need to continue in assessing your and your team’s capabilities and seek guidance from your supervisor and technical mentors as necessary.This role presents an exciting opportunity to make significant impact on the design and innovation of GE Aerospace’s products.Job DescriptionEssential Responsibilities:As a Design Engineer, you will:Execute the mechanical design, analysis, and evaluation of hardware produced using additive manufacturing with sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements. Act as interface between mechanical design, manufacturing, and systems engineering teams.Develop specialized knowledge of additive design and module integration. Have awareness as to how work of own team contributes to our commercial programs, future programs, and the Additive integrated product team. Foster awareness of market trends, competition, and how products are differentiated. Serve as a resource for executing best practices and delivering work considered high quality.Use judgment to make decisions or solve moderately complex tasks or problems in areas component design, manufacturing, and program management. May use multiple internal and limited external sources outside of own team to arrive at decisions.Manage project plans and action plans for executing on component durability, producibility, delivery, and cost objectives. Lead cross-functional teams through completion of deliverables. Communicate schedule pressures and delegate tasks appropriately.Acts as a resource for colleagues with less experience. May lead small projects with moderate risks and resource requirements. Explains difficult or sensitive information; works to build consensus. Develop persuasion skills required to influence others on topics within field.Engage with supply chain on the industrialization of components produced using additive manufacturing. Be connected to the details of the additive manufacturing process and work closely with the team at our development facilities.Qualifications/Requirements:Bachelor of Science in Mechanical Engineering, Aerospace Engineering, Materials Engineering, or related STEM field from an accredited universityMinimum of 6 years' experience in design engineeringDesired Characteristics:Master of Science in Mechanical Engineering, Aerospace Engineering, Materials Engineering, or related STEM field from an accredited universityStrong interpersonal and leadership skills; experience in influencing and leading small teams with a flexible, friendly attitudeTechnical depth in additive manufacturing; proven experience collaborating with manufacturing counterpartsExperience in the design of gas turbine engines and gas turbine engine componentsProficiency in CAD software (Unigraphics NX), GD&T, and with stress analysis software (ANSYS, etc.)Proven ability to coordinate multiple projects simultaneously with demonstrated project management expertiseEffective problem-solving, analytical skills, and ability to make appropriate risk-based decisions; ability to mentor others in resolving complex problemsExcellent communication and technical documentation skillsKeen listener and innate drive to succeed.This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description SummaryJob DescriptionJob Description SummaryThe Certification Engineer – Regional and Business Aviation will report to a Systems Engineering Leader in Cincinnati, OH. This person must consider both the business and the technical needs of customers to execute certification activities that require coordination with the ODA, Airworthiness & Certification team, FAA, EASA, and other Civil Aviation Authorities. They will apply regulatory knowledge and cross-discipline technical expertise towards airworthiness and certification outcomes. This is a senior position for experienced applicants.Essential ResponsibilitiesApplies regulatory knowledge and awareness to lead certification activities across all engineering disciplines, including defining requirements for and planning of certification efforts.Authors and reviews certification deliverables. Strong technical writing and communication skills.Utilizes in-depth knowledge of a technical discipline and analytical thinking to execute policy/strategy.Has knowledge of best practices and how own area integrated with others; is aware of the competition and the factors that differentiate them in the market.Responsible for driving CTQ / Risk trades within the teams designing the components. Manages the overall product configuration and configuration control system.Facilitate communication of technical and business information within the work group and between both internal and external departments/agencies.Assure technical quality excellence, timely completion of work and reviews, appropriate use of resources, and responsiveness to customer / program needs.Effectively communicate and provide recommendations through the analysis and presentation of technical data to internal and external GE customers.Qualifications/RequirementsBachelor's degree from an accredited university or college in engineering.Minimum of 5 years' experience in systems or airworthiness & certification engineering.Desired CharacteristicsSelf-starter with an eye constantly on problem solving and driving solutionsExperience working with regulatory agenciesExperience in certification content and deliverablesTechnical expertise in jet engine and/or hardware designEstablished project management skills and ability to coordinate several projects simultaneouslyStrong oral and written communication skillsAbility to influence small team and across functionsUncompromising desire to ensure the safety of the travelling public as well as that of fellow employeesGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes#LI-Remote - This is a remote position

Job Description SummaryRole is on the LEAP Services Team, with the focus on owning and executing the LEAP Wiebulls to support SPMT, fleet model, field issues, warranties, and business plans. The role also includes ownership of LEAP TOW which requires integration across Services, MEF, Systems Fleet Stabilty, Digital Services, Services Technology, Customer teams, and Lifecycle Engineering to ensure TOW forecasts and PRSV forecasts are correct across all LEAP models (1A, 1B, and 1C).Systems engineering is a cross-functional engineering discipline centered on an approach, mindset, and process. All activities that consider both the business and the technical needs of the customers with the goal of providing a quality product that meets the users needs. The discipline that executes a robust process of design, creation, and optimization of systems, consisting of identification and quantification of system requirements, creation of alternate system design concepts, performance of design trade studies, selection and implementation of the best designs and verification that the design is properly integrated and executed. Process that proceeds from concept to production to operation. Impacts the team’s ability to achieve service, quality and timeliness of objectives. The role is subject to operating policy objectives. There is moderate autonomy within the role. High levels of operational judgment are required to achieve outcomes required.Job DescriptionRoles and ResponsibilitiesConducts Weibull analysis to support field issues, SPMT, fleet model, MEF models, new topics, and LEAP warranty and business plans.Provide consultation and coaching to LEAP engineering team on Weibull analysesResponsible for LEAP TOW which includes LEAP TOW bowler owner providing updates to Services and CEO leadership, providing time on wing advice to customer teams, PRSV forecasting for Services team, removal estimations, and directing issues to Digital Services and generating productive answers to Engineering.Conducts component and product integration. All activities that span multiple components and products and are concerned with how to integrate for maximum performance and operability. Manages product and systems requirements, specifications and flow down. Drives validation and verification activities for the overall product/system, including system level testing. Responsible for defining product requirements for the module / component / subcontractors and partners teams. Manages interface between components and execution organizations.Responsible for driving CTQ / Risk trades within the teams designing the components. Manages the overall product configuration and configuration control system.Requires specialized knowledge within the function. Influence the development of strategy for the area of responsibility, including control of resources and influences policy formulation.Interprets simple internal and external business challenges and recommends best practices to improve products, processes or services. Stays informed of industry trends that may inform work.Uses high level of judgment to make decisions and handle complex tasks or problems in areas of operational, product management, manufacturing, technology or engineering. Has ability to assess quality of information given and ask pertinent questions to stakeholders. Able to offer new solutions to problems outside of set parameters and is able to construct and provide recommendations. Uses multiple internal and some external sources outside of own function to help arrive at a decision.May lead functional teams or projects with minimal resource requirements, risk, and/or complexity. Communicates difficult concepts and may influence others' options on particular topics. May guide others to consider a different point of view.Required QualificationsBachelor's degree in engineering from an accredited university or collegeMinimum of 5 years' experience in systems engineeringDesired CharacteristicsMaster's degreeUnderstanding of Weibull AnalysisStrong oral and written communication skills. Strong interpersonal and leadership skills. Demonstrated ability to analyze and resolve problems. Demonstrated ability to lead programs / projects. Ability to document, plan, market, and execute programs. Established project management skills.Has in-depth knowledge of best practices and how own area integrates with others; has working knowledge of competition and the factors that differentiate them in the marketUses judgment to make decisions or solve moderately complex tasks or problems in areas of operational/product management, manufacturing, technology or engineering. Takes new perspective on existing solutions. Uses technical experience and expertise for data analysis to support recommendations. Uses multiple internal and limited external sources outside of own function to arrive at decisions.Acts as a resource for colleagues with less experience. May lead small projects with moderate risks and resource requirements. Explains difficult or sensitive information; works to build consensus. Developing persuasion skills required to influence others on topics within field.#LI-EDRICHThis role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No#LI-Remote - This is a remote position

Job Description SummaryThe GE9X product line has completed engine certification and is actively supporting Boeing aircraft certification efforts. In addition, several product improvement design efforts are underway driving several engine ground tests and airframe integration. In this role you will be the Assembly, Production & Test focal and also be responsible for integration of GE9X engine systems with Boeing 777X airframe systems.Systems engineering is a cross-functional engineering discipline centered on an approach, mindset, and process. All activities that consider both the business and the technical needs of the customers with the goal of providing a quality product that meets the users needs. The discipline that executes a robust process of design, creation, and optimization of systems, consisting of identification and quantification of system requirements, creation of alternate system design concepts, performance of design trade studies, selection and implementation of the best designs and verification that the design is properly integrated and executed. Process that proceeds from concept to production to operation. Impacts the team’s ability to achieve service, quality and timeliness of objectives. The role is subject to operating policy objectives. There is moderate autonomy within the role. High levels of operational judgment are required to achieve outcomes required.Job DescriptionRoles and ResponsibilitiesConducts component and product integration. All activities that span multiple components and products and are concerned with how to integrate for maximum performance and operability. Manages product and systems requirements, specifications and flow down. Drives validation and verification activities for the overall product/system, including system level testing. Responsible for defining product requirements for the module / component / subcontractors and partners teams. Manages interface between components and execution organizations.Responsible for driving CTQ / Risk trades within the teams designing the components. Manages the overall product configuration and configuration control system.Requires specialized knowledge within the function. Influence the development of strategy for the area of responsibility, including control of resources and influences policy formulation.Interprets simple internal and external business challenges and recommends best practices to improve products, processes or services. Stays informed of industry trends that may inform work.Uses high level of judgment to make decisions and handle complex tasks or problems in areas of operational, product management, manufacturing, technology or engineering. Has ability to assess quality of information given and ask pertinent questions to stakeholders. Able to offer new solutions to problems outside of set parameters and is able to construct and provide recommendations. Uses multiple internal and some external sources outside of own function to help arrive at a decision.May lead functional teams or projects with minimal resource requirements, risk, and/or complexity. Communicates difficult concepts and may influence others' options on particular topics. May guide others to consider a different point of view.Required QualificationsBachelor's degree in Mechanical or Aerospace engineering from an accredited university or collegeMinimum of 5 years of experience in Systems Engineering in the Aerospace/Aviation IndustryDesired CharacteristicsMaster's degree in engineering from an accredited university or collegeStrong oral and written communication skills.Strong interpersonal and leadership skills.Demonstrated ability to analyze and resolve problems.Demonstrated ability to lead programs / projects.Ability to document, plan, market, and execute programs.Established project management skills.Systems Engineering/Engine Testing Experience.This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description SummaryAs a member of the Services Engineering Thermal Systems Design team, the Thermal Staff Engineer will help create the design and deliver solutions for the GEnx Commercial engine in service around the globe. The engineer in thermal design will demonstrate accountability for functional and business objectives. This role will the TSD focal for field investigations, delivery issues, and durability improvements. The individual will coordinate the thermal design requirements with stakeholders, evaluate turbine airfoil designs, and execute analyses to committed schedules. In addition, you will manage module impacts while meeting technical and program requirements.Job DescriptionESSENTIAL RESPONSIBILITIESExpertise in Rotor/Stator thermal design and analysis, thermal and air circuit analysis tools for engine module design, and methods and design practices.Technical knowledge in thermal design who takes ownership and delivers resultsLead and provide key technical direction for the Services Engineering thermal design and analysisReview system design for compliance with best practice and requirements and identify/recognize cross functional system design issuesRecommend and drive architecture and inspection maturation plans and establish system design risk and recommend abatementsProvides guidance for design reviewsClear thinker and problem solver, is cognizant of system level interactions and utilizes robust design principlesRecognized as approachable, collaborative and supportive and able to work effectively across organizational boundariesQUALIFICATIONS/REQUIREMENTSBachelor of Science in Engineering, Physics, Chemistry, Mathematics, or Computer Science from an accredited college or universityAt least 8 additional years of experience in an engineering capacityDESIRED CHARACTERISTICSStrong oral and written communication skillsStrong interpersonal and leadership skillsDemonstrated ability to document, plan, market and manage programs that further theknowledge, understanding and capability of the businessProblem analysis and resolution skillsDemonstrated leadership in defining the state of the art in thermal circuit design and assessments along with the ability to teach and employ standard practices within this field.#LI-EDRICHThis role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No#LI-Remote - This is a remote position

Job Description SummaryThe GE Aerospace Engineering Team is looking for experienced mechanical design engineers who are ready to work on the fastest growing engine in Aviation history, LEAP. The LEAP engine is a culmination of cutting-edge technology, world-class reliability and unparalleled performance, and is the engine of choice to power the Airbus A320neo, the Boeing 737 MAX, and the COMAC C919. LEAP's 15% reduction in fuel burn (over prior generation of narrowbody applications) is moving the needle on sustainability today and proving out the next generation of sustainable technologies like ceramic composites, advanced turbine cooling, and additive manufacturing. Our LEAP engine incorporates some of GE's latest technological innovations which are challenging our engineers to test the limits of what is possible and define non-traditional design solutions that keep GE Aerospace at the forefront of innovation. The Staff Mechanical Design Engineer will be part of the LEAP Engineering Design Team in Cincinnati, OH. They will leverage operational judgement, technical expertise and leadership skills on turbomachinery design and product improvement activities that ultimately power our customers, lift people up and bring them home safely. This role specifically will be supporting the LEAP Evolution HPT team.Job DescriptionRoles and ResponsibilitiesThe Staff Mechanical Design Engineer will:Execute, provide guidance, and collaborate with GE Technical Experts on the design, analysis, and evaluation of design projects using sound engineering principles and adhering to business standards, practices, procedures, and LEAP product / program requirementsDocument, prepare and present technical data and results in technical program reviews and internal and external customers.In-depth understanding of key business drivers; uses this understanding to accomplish own work as well as mentor othersProvide timely communications to team members on significant issues or developments and promote open dialogueWork on teams to lift up and support organizational initiativesExecute the design, analysis, or evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements. This work would include mechanical and/or electrical engineering for all productsDeveloping specialized knowledge in their discipline. Serves as best practice/quality resource. Has awareness of latest technical developments in own area. Contributes towards strategy and policy development, and ensure delivery within area of responsibility.Has in-depth knowledge of best practices and how own area integrates with others; has working knowledge of competition and the factors that differentiate them in the marketUses judgment to make decisions or solve moderately complex tasks or problems in areas of operational/product management, manufacturing, technology or engineering. Takes new perspective on existing solutions. Uses technical experience and expertise for data analysis to support recommendations. Uses multiple internal and limited external sources outside of own function to arrive at decisions.Acts as a resource for colleagues with less experience. May lead small projects with moderate risks and resource requirements. Explains difficult or sensitive information; works to build consensus. Developing persuasion skills required to influence others on topics within field.Required QualificationsBachelor's degree in engineering from an accredited university or collegeMinimum of 5 years of experience in Design EngineeringDesired CharacteristicsMaster's degree in engineering from an accredited university or collegeStrong oral and written communication skills.Strong interpersonal and leadership skills.Demonstrated ability to analyze and resolve problems.Demonstrated ability to lead programs / projects.Ability to document, plan, market, and execute programs.Established project management skills.Demonstrated expertise in turbomachinery mechanical designSignificant experience in the design, testing, and certification of turbomachineryStrong technical aptitude, including applicable engineering tools and principlesAbility to communicate clearly and effectively with all levels of the organization and provide guidance to engineers with less experienceDemonstrated ability to analyze and resolve problems with a sense of urgency#LI-EDRICHThis role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Job Description SummaryRole is on the LEAP Services Team, with the focus on owning and executing the LEAP Wiebulls to support SPMT, fleet model, field issues, warranties, and business plans. The role also includes ownership of LEAP TOW which requires integration across Services, MEF, Systems Fleet Stabilty, Digital Services, Services Technology, Customer teams, and Lifecycle Engineering to ensure TOW forecasts and PRSV forecasts are correct across all LEAP models (1A, 1B, and 1C).Systems engineering is a cross-functional engineering discipline centered on an approach, mindset, and process. All activities that consider both the business and the technical needs of the customers with the goal of providing a quality product that meets the users needs. The discipline that executes a robust process of design, creation, and optimization of systems, consisting of identification and quantification of system requirements, creation of alternate system design concepts, performance of design trade studies, selection and implementation of the best designs and verification that the design is properly integrated and executed. Process that proceeds from concept to production to operation. Responsible for departmental operations planning/execution or is focused on execution of professional activities within a technical discipline. Functions with some autonomy but guided by established policies or review of end results. The job allows modification of procedures and practices covering work as long as the end results meet standards of acceptability (quality, volume, timeliness etc.).Job DescriptionRoles and ResponsibilitiesConducts Weibull analysis to support field issues, SPMT, fleet model, MEF models, new topics, and LEAP warranty and business plans.Provide consultation and coaching to LEAP engineering team on Weibull analysesResponsible for LEAP TOW which includes LEAP TOW bowler owner providing updates to Services and CEO leadership, providing time on wing advice to customer teams, PRSV forecasting for Services team, removal estimations, and directing issues to Digital Services and generating productive answers to Engineering.Conducts component and product integration. All activities that span multiple components and products and are concerned with how to integrate for maximum performance and operability. Manages product and systems requirements, specifications and flow down. Drives validation and verification activities for the overall product/system, including system level testing. Responsible for defining product requirements for the module / component / subcontractors and partners teams. Manages interface between components and execution organizations.Responsible for driving CTQ / Risk trades within the teams designing the components. Manages the overall product configuration and configuration control system.Includes direct people management responsibility including staffing and performance development. Utilizes in-depth knowledge of a technical discipline and analytical thinking and technical experience to execute policy/strategy.Has knowledge of best practices and how own area integrates with others; is aware of the competition and the factors that differentiate them in the marketUses some judgment and has some ability to propose different solutions outside of set parameters to address more complicated manufacturing processes with technical variety and/or interdependent production cycles. Uses technical experience and analytical thinking. Uses multiple internal and limited external sources outside of own teams to arrive at decisions.Acts as a resource for colleagues with less experience. May lead small projects with low risks and resource requirements. Explains information; developing skills to bring team members to consensus around topics within field. Conveys performance expectations and may handle sensitive issues.Required QualificationsBachelor's degree in engineering from an accredited university or collegeMinimum of 3 years of experience in Systems EngineeringDesired CharacteristicsStrong oral and written communication skills.Demonstrated ability to analyze and resolve problems.Ability to document, plan, market, and execute programs.Established project management skills.#LI-EDRICHThis role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Job Description SummaryLeads a team of 4 financial managers responsible for the financial planning, reporting, analysis, and capital allocation of the Commercial Engines & Services (CES) Engineering budget that contributes to the overall business strategy and key performance indicators (KPIs). A leader that will demonstrate financial accountability for functional, business, and broad company objectives associated with engineering spend.Job DescriptionRoles and ResponsibilitiesProvide leadership, guidance, coaching, motivation, and technical direction to direct staff.Attract, retain, and develop senior financial managers.Engineering finance leader for the Commercial and Services product lines: establish a trusted financial partnership with the product line & engineering GM’s.Work with the operations team to manage strategy, budget, forecasting, monthly operating reviews, and close activities.Partner with program management team to develop strategy and financials for major engineering projects.Establish ROI process and metrics to compete engineering investments.Monitor actual engineering cost vs. plan/forecast and identify suggestions to improve profitability and cashflow.Support period audits and reviews, both internal and external.Use lean and automation to identify and support the implementation of process improvements for financial forecasting, planning, reporting, and systems (Clarity, CPP, Spotfire,)Effectively communicate commercial & services engineering financials and objectives to senior product line and engineering leadership.Perform special analysis of major issues as required and recommend solutions to complex business issues. May lead projects with cross functional teams.Become an expert in engineering financial charging practices, systems, and accounting. Provide recommendations and training to operational partners as needed.Work with engineering and product line teams to establish processes for the accounting, monitoring, & forecasting of external funding/reimbursements.Required QualificationsBachelor's degree from an accredited university or college.6+ Year of Finance experience.Desired CharacteristicsDemonstrated leadership with the ability to coach, facilitate and influence effectively at all levelsDemonstrated ability or interest to learn LEAN tools and automation.Strong verbal and written communication skills.Strong interpersonal and leadership skills.Demonstrated ability to analyze and resolve problems.Demonstrated ability to lead cross-business initiatives.Transparent: shares critical information, speaks with candor, contributes constructivelyHumble: respectful, receptive, agile, eager to learnIdeal candidate would be based on site but willing to consider candidates in other time zone friendly location.GE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description SummaryThe LEAP Engine Performance team is responsible for ensuring overall engine performance meets all customer requirements for thrust and fuel consumption for applications for our LEAP airframer and airline customers. As an engineer in the Performance team, you will work cross functionally within the Engine Systems team to ensure all program Engine Performance deliverables are met. This includes close cooperation with SPOCT disciplines (systems, performance, operability, controls, and transient analysis). The role centers around the utilization of the engine cycle model which models the thermodynamics of components and the engine as a whole. You will utilize the engine model to evaluate engine design change trade studies as well as process results for engineering tests and certification testing. Systems engineering is a cross-functional engineering discipline centered on an approach, mindset, and process. All activities that consider both the business and the technical needs of the customers with the goal of providing a quality product that meets the users needs. The discipline that executes a robust process of design, creation, and optimization of systems, consisting of identification and quantification of system requirements, creation of alternate system design concepts, performance of design trade studies, selection and implementation of the best designs and verification that the design is properly integrated and executed. Process that proceeds from concept to production to operation. Impacts departmental operations and responsible for planning/execution. The role has some autonomy but is focused on execution of activities within an operating discipline covered by standard functional practices and procedures.Job DescriptionRoles and ResponsibilitiesLead thermodynamic cycle development work, analysis, and trade studies on the assigned program.Work cross-functionally with Transient Performance, Operability, Systems, Project, Aero, Thermal Systems Design, and hardware design engineers to accurately assess and model turbofan engine performance.Own/delegate Performance planning, test coverage, and analysis for assigned engine tests including CFR 33 certification or engineering testing.Proactively identify engine performance issues and work cross functionally to drive solutions.Demonstrate ownership in production and field support activities on assigned program.Support the team in preparation for technical reviews.Drive proper documentation of all technical work on the assigned program.Participates in the research, design, development, and enhancement of technologies in the areas of performance, operability, and cost optimization.Can include delivery of customer solutions that properly balance cost and benefit (including architecture, key design trade-offs, flow-down of requirements and flow-up of capability).Developing specialized knowledge in their discipline.Serves as best practice/quality resource.Has awareness of latest technical developments in own area.Contributes towards strategy and policy development and ensure delivery within area of responsibility.Uses judgment to make decisions or solve moderately complex tasks or problems in areas of operational/product management, manufacturing, technology or engineering.Takes new perspective on existing solutions.Uses technical experience and expertise for data analysis to support recommendations.Uses multiple internal and limited external sources outside of own function to arrive at decisions.Acts as a resource for colleagues with less experience.May lead small projects with moderate risks and resource requirements.Explains difficult or sensitive information; works to build consensus.Developing persuasion skills required to influence others on topics within field.Required QualificationsBachelor's degree in engineering from an accredited university or college.Minimum of 8 years of experience in engineering in related field (or 5 with an advanced engineering degree).Strong aero-thermal analytical skills.Desired CharacteristicsStrong oral and written communication skills.Strong interpersonal and leadership skills.Demonstrated ability to analyze and resolve problems.Demonstrated ability to lead programs / projects.Ability to document, plan, market, and execute programs.Established project management skills.Advanced Degree in Engineering / Technical Field.Experience leading gas turbine system level thermodynamic modeling and/or data analysis activities.Detailed working knowledge of NPSS#LI-RB1This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes#LI-Remote - This is a remote position

Job Description SummaryThe GE9X Fan & Mechanical Systems Lifecycle Engineering Leader is responsible for the Safety, Quality, Delivery, and Cost, collaborating with Supply Chain and Global Engineering teams for the assigned hardware including Fan, Mechanical Systems Engineering (MSE), and Frames content. Includes activities contributing to the design and development of products, solutions and systems. Includes activities linked to technical improvement of existing products and components Impacts the team’s ability to achieve service, quality and timeliness of objectives. The role is subject to operating policy objectives. There is moderate autonomy within the role. High levels of operational judgment are required to achieve outcomes required.Job DescriptionRoles and ResponsibilitiesExecute the design, analysis, or evaluation of assigned projects using sound engineering principles and adhering to business standards, practices, procedures, and product / program requirements. This work would include mechanical and/or electrical engineering for all productsManages a small to medium team of senior professionals as well as others. Requires specialized knowledge within the function. Influence the development of strategy for the area of responsibility, including control of resources and influences policy formulation.Interprets simple internal and external business challenges and recommends best practices to improve products, processes or services. Stays informed of industry trends that may inform work.Uses high level of judgment to make decisions and handle complex tasks or problems in areas of operational, product management, manufacturing, technology or engineering. Has ability to assess quality of information given and ask pertinent questions to stakeholders. Able to offer new solutions to problems outside of set parameters and is able to construct and provide recommendations. Uses multiple internal and some external sources outside of own function to help arrive at a decision.May lead functional teams or projects with minimal resource requirements, risk, and/or complexity. Communicates difficult concepts and may influence others' options on particular topics. May guide others to consider a different point of view.Required QualificationsBachelor's or in Engineering from an accredited university or college5 years of Engineering experienceDesired CharacteristicsMaster's degreeStrong oral and written communication skills.Strong interpersonal and leadership skills.Demonstrated ability to analyze and resolve problems.Demonstrated ability to lead programs / projects.Ability to document, plan, market, and execute programs.Established project management skills.Prior experience leading a team of direct reports is preferred.Significant turbomachinery design experience is preferredDemonstrated commitment to lean with focus on respect for people and continuous improvement.This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes

Job Description SummaryAs a part of GE Aviation’s groundbreaking, collaborative Additive Integrated Product Team, you will use your materials expertise and program management skills to partner with manufacturing, sourcing, and quality engineers to support the growth in additive production rates while maintaining and improving quality standards, in support of our commercial and military aviation products. These critical technologies include DMLM (Direct Metal Laser Melting) and other additive modalities in several alloys including Titanium, Aluminum, Nickel, and Cobalt-based alloys.Job DescriptionEssential Functions / Responsibilities:Responsibilities in this role may include but would not be limited to:Support Sourcing and Supply Chain using Additive Manufacturing Methods to improve delivery and costLead collaborative cross-functional teams (materials, design, manufacturing, quality) to increase the technical maturity of advanced additive manufacturing methods using the TRL/MRL processExecute technical projects & programs required to reduce technical risk associated with new additive manufacturing methods, building and leveraging significant domain expertise in the additive field.Influence standard work for quality assurance through ownership and/or authorship of key specifications controlling powder, printed castings, and finished part standards; drive efficiency in processes and update additive specifications as neededDesign and conduct studies to characterize the impact of variation within manufacturing process windows, and use results to recommend updates to specifications, technical plans, and standard work instructionsLead or support efforts to ensure part quality with a reduced reliance on physical testing and an increased reliance on non-destructive methods including, but not limited to in-process monitoring approaches and/or other standardized methodsProvide MAE (Materials Application Engineering) support for parts under development that utilize additive manufacturingMake cross-product linkages, leveraging additive expertise to provide insights on current and potential additive componentsProactively identify lessons learned and best practices and ensure appropriate documentationProvide consultation and share expertise with colleagues also developing additive technologiesCommunicate significant developments with leadership and consult on technical roadmap developmentLead/support root cause investigations and corrective action implementationIn this role, you will gain or build:Systems thinking through the broader integration of design, materials science, manufacturing, and quality.Technical understanding of GE’s most advanced manufacturing technologyCross-division and cross-business collaboration leadership skillsQualifications/Requirements:Bachelor’s Degree in Materials Science or closely related Engineering fieldMinimum of 7 years of experience in a materials science engineering position or related additive manufacturing positionHands on experience with material processing or handlingDesired Characteristics:10 years of experience in materials science, with at least 7 years of industry experience in addition to any academic experienceUnderstanding of Additive manufacturing process (i.e., laser powder bed, electron beam powder bed, binder jet) working knowledge and/or operation experienceStrong oral and written communication skills, particularly around technical documentationStrong interpersonal skillsDemonstrated ability to analyze and resolve problemsProgram management skills; ability to develop, document, market, and execute programsAbility to guide and influence others, especially those not in a direct reporting position.Understand how to thrive in a dynamic team environmentBackground in material characterization, including metallography, thermal and mechanical property testing and analysisStrong background in physical metallurgyExperience with titanium and/or aluminum-based aerospace alloysExperience with nickel and/or cobalt-based aerospace alloysThis role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is anEqual Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No