Aable John's Tree Service, Inc is seeking to hire a CDL Driver/Equipment Operator and worker as we continue to grow! We offer weekly pay, the rate of pay is based on experience. The ideal candidate will be responsible for the loading of, transporting of materials and heavy equipment safely to and from job sites and pits. This position requires a strong commitment to safety, adherence to traffic laws, and the ability to operate different types of trucks, heavy equipment trailers and heavy equipment. Also expected to support the crew by helping perform work from the ground including clearing brush and trees as directed, and performing clean-up on each job site. Active CDL Required, Class A or B. Basic drug screen and driver's license required. Position will require manual labor and exposure to the elements.
Job Duties: Operate various types of trucks and equipment including: dump trucks, heavy equipment trailers, skid loader, wheel loaders, excavators, dozer and compaction equipment. Ensure the safe loading and unloading of construction material while adhering to all safety protocols. Conduct pre-trip and post-trip inspections of vehicles to ensure they are in good working condition. Navigate routes effectively while complying with all traffic regulations. Communicate with team members regarding deliveries and any potential delays. Handle manual transmission vehicles as required for specific truck types. Assist in the maintenance of the truck by performing basic repairs or reporting issues as necessary.
Experience: Proven experience in commercial driving with a valid “Class A or B Commercial Driver’s License (CDL). Experience driving manual transmission vehicles is necessary! A strong understanding of movement and installation materials while adhering to safety regulations is essential. Previous experience in a similar role will be an advantage.
Benefits: Bonuses and merit-based increases Internal promotion opportunities Referral program A diverse, inclusive, and supportive environment
Qualifications: MUST have a CDL A or B and exp. driving & operating vehicles with Manual transmission High school degree preferred, but not required Experience in lawn care helpful Must be able to operate various lawn care machinery: mowers, edgers, backpack blowers etc Perform heavy lifting/pushing/pulling of various landscaping equipment and materials, including, but not limited to backpack blowers, large containers of mulch/plant material, various sizes of lawnmowers, etc. Work hours vary up to 12 hours per day Work in extreme weather conditions (heat, cold, precipitation) Some Travel May be Required
EOE

Aable John's Tree Service, Inc is seeking to hire Tree Trimmers/ Tree Climbers as we continue to grow! We offer steady work and weekly pay, the rate of pay is based on skill and experience.
As a Tree Climber for Aable John's Tree Service company, you'll assist arborists with tree removal, pruning, and maintenance, ensuring the safety and cleanliness of the work area, and utilizing tools and equipment like ropes, pole-saws, chippers and chainsaws. The Tree Trimmer/Climber will be responsible for assisting the crew in the removal of trees, trimming of branches, and general maintenance of trees and shrubs. The ideal candidate is not afraid of heights and will have experience with tree trimming and a strong commitment to safety. Basic driver's license required. Position will require manual labor and exposure to the elements. Women with experience in Landscaping or Groundskeeping are encouraged to apply!
Duties include but are not limited to: Sweeping and blowing leaves and clippings Prune shrubs and trees as needed and clear debris Clean site and watch for trash, limbs, and rocks Operate powered equipment such as mowers, tractors, twin-axle vehicles, chain-saws, sod cutters and pruning saws Prune and trim trees, shrubs and hedges using hand tools such as shovels, rakes, pruning saws, hedge/brush trimmers, axes, shears, pruners or chain saws. Prep soil for tree planting; mulch application; preparation using soil amendments; core aeration or stump grinding Pruning, planting, removal or replacement of shrubs, plants, and flowers; pruning of trees and replacement of trees that are planted as a replacement due to the removal of diseased or damaged trees, or trees that constitute a hazard; non-substantive replacement of sod. Maintain and repair tools, equipment, and structures such as, but not limited to, fences, benches, and minor out building maintenance using hand and power tools Perform heavy lifting/pushing/pulling of various landscaping equipment and materials, including, but not limited to backpack blowers, large containers of mulch/plant material, various sizes of lawn mowers, etc.
Benefits: Competitive Pay Internal promotion opportunities Referral program A diverse, inclusive, and supportive environment
Qualifications: MUST have a valid US driver's license High school degree preferred, but not required Experience in Tree Care & Groundskeeping Lift and carry up to 50 lbs. Lift branches and limbs Push, pull, grip and squeeze various tools, products and/or items (e.g., pruning) Bend and kneel up to 6 hours or more a day Work in extreme weather conditions (heat, cold, precipitation)
Equal Opportunity Employer. Aable John's Tree Service company is a second chance employer.

What you will doJohnson Controls Inc. is looking for forward-thinking entry level talent to join our growing organization to support the fast-growing Data Center market. You will be part of a new centralized team supporting Data Center customers in North America.During these unprecedented times, JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant facility HVAC chiller and commercial products in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.We are looking for entry level skilled HVAC Technicians who have experience with air cooled chillers or large roof top ducted units to support the growing data center market. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement. We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredBe a vital member of a new North America Data Center team responsible for entry level startup, commissioning, and aftermarket services for this fast-growing business.Must be a member or willing to join a local Union. Minimum of 1 year of practical working experience on air cooled or large roof top ducted units with some HVAC/ mechanical troubleshooting experience.Travel 50% to 60% within North America to support Data Center Customers startup and commissioning activities as well as aftermarket service trouble shooting.You may be required to pass a knowledge examination to assess proficiencies.Willing to invest in career development. You will enroll in training programs to gain knowledge in HVAC products supporting the Data Center Market.You will work with local market technicians.Attention to detail through interpersonal, digital, and written skills.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all forms.Universal EPA refrigerants license, applicable state or local licensing, good driving record and valid driver's license.

Overview: If you reside in California, please see our California Applicant Privacy Policy for more information about our data handling practices and your data rights. Responsibilities: Let MV Transportation expand your toolbox! Do you want a stable career with great and steady pay, a set schedule, and outstanding benefits ! Would you like to work with a company that invests in your growth Then join the MV Transportation team. Start on the path in under 5 minutes by reading the job description and submitting your application. MV Transportation is now hiring experienced Mechanics in your area! Who You Are:As a Mechanic, you will perform preventative maintenance, diagnosis, service and repair of steering, suspension, brakes, engines, transmissions, differentials, electrical, wheelchair lifts, and air conditioning systems. Successful applicants must be able to work safely, perform part analysis on damaged parts and assist in inventory control or other duties, as necessary.What’s in it for YOU:Competitive Pay Rates! 40 hours a week, not flat rateOT as needed over 40 hoursFull Benefits: Medical, Vision, Dental, and 401K planPaid vacationCompany provided uniformCorporate partner discount programCareer advancement through a national companyDuties include, but are not limited to the following: Diagnoses, examines, and investigates vehicles to determine causes of defective operation of vehicle systems and components.Perform scheduled preventative maintenance of vehiclesExecute major and minor repairs of defective components.Document all activities in MV’s Fleet Management System.Maintain work environment in an organized and safe condition. Qualifications: Talent Requirements:High school diploma or equivalent.Combination of at least five (5) years of apprentice level verifiable training and experience in automotive and diesel mechanics, which may include high school mechanics courses and/or a regional occupational program.Must be able to pass a pre-employment drug screen, DOT physical and random drug testing.MV Transportation is committed to a policy of Equal Employment Opportunity and will not discriminate against an applicant or employee on the basis of race, color, religion, creed, national origin or ancestry, sex, physical or mental disability, veteran or military status, genetic information or any other legally recognized protected basis under federal, state or local laws, regulations or ordinances. The information collected by this application is solely to determine suitability for employment, verify identity and maintain employment statistics on applicants. Where permissible under applicable state and local law, applicants may be subject to a pre-employment drug test and background check after receiving a conditional offer of employment.#appcast

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries.Location: Gainesville Employment Status: Hourly Full-Time Function: Maintenance Pay Range: ($62,263.00- $93,395.00) Target Bonus: % Req ID:26724 Job ResponsibilitiesSummary of PositionMaintenance Technicians will repair/maintain all production/facility equipment and perform project work. This position requires a high regard for safety at all times in performing any tasks associated with working for Harris Products Group. Performs as Lead Person for Maintenance.Key DeliverablesWorks safely and supports safety within their team across the organization. Completes weekly maintenance schedule and makes safe, quality & timely repairs to ensure weekly production schedule is completed. Supports lean initiatives to facilitate team goals/metrics. Participates in team meetings and works on cost savings projects.Key Accountability MetricsSafety metrics, Production schedule completion percentage, Work order completion percentage, PMs completion percentage, Breakdown man hour utilization percentage, Production OEE, EBITB.Key Responsibilities/Essential Functions:Include the following and other duties maybe assigned.Works safely and supports safety within their team and across the organizationScheduled Maintenance – 50% Completes weekly maintenance schedulePerforms preventative maintenance on equipmentSchedule repairs of equipmentPerforms fabrication, pipe fitting, welding, brazing & solderingOperates material handling equipment, scissor lift and manipulating man lift when neededWorks on team projects, Six Sigma projects and provides support for other team meetings and projects.Correctly fills our work orders and time sheetsBreakdown Maintenance – 10%Observes operation of equipment, troubleshoots abnormalities, dismantles equipment to gain access, determines faulty parts, requisitions parts, reassembles equipment, tests and runs out, makes sure equipment is in good, safe working operation and returns it to production.Assist in maintaining repair parts inventory & suppliesCommunicates pertinent information to supervisor.Trains personnel from other departments to recognize problems and issues with equipment.Safety Training, Team Meetings & Lean concepts – 5%Participates in safety training and demonstrates a high regard for safety at all timesAttends team meetingsUtilizes lean tools: 5s, visual factory concepts in maintaining order and cleanlinessPerforms Lead Responsibilities – 35%Coordinates the duties of other Maintenance Technicians.Responsibilities for securing the facility.Schedules weekend maintenance support.Supports and enforces all Company policies and procedures.Performs all responsibilities in a consistent, reliable and professional manner.Sets a positive example for all employees and encourages teamwork.Provides an environment which fosters good morale among fellow employees.Establishes and maintains sound communications with team, other employees and management.Assists and supports coworkers in resolving work related issues.Makes on the spot corrections of any unsafe acts.Knows, understands and effectively utilizes the various tools of Lean Manufacturing to support and lead the continuous improvement efforts.Job RequirementsRequired -High school diploma or general education degree (GED); and three or more years related experience and/or training; or equivalent combination of education and experience.Excellent trouble shooting skills in PLCs, electrical, mechanical, hydraulic, and pneumatic systems for production machinery and support equipment.Able to read and understand electrical, mechanical, hydraulic, and pneumatic printsUnderstand ladder logic for relays and PLCsMust be computer literateExperienced in welding, fabricating and pipe fitting.Operate material handling equipment, scissor lift and manipulating man liftPreferred-Associates Degree in Technical StudiesExperience with Lean toolsFamiliar with Allen Bradley PLCs, SLC, Micro Logix and Control LogixFamiliar with Logix 500, Logix 5000 and RSLinxFamiliar with operation of HMIs (touch screens)Be able to install and set up AC & DC drivesFamiliar with NEC as applies to Industrial applicationsFamiliar with Fanuc Robotics Programming/Troubleshooting and RepairFamiliar with Mazak CNC and Fanuc Controls Troubleshooting and RepairLincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Maintenance Technician Industrial Maintenance Technician Crown Health Care Laundry Services, a well-established and growing linen services company with plants in Alabama, Florida, Georgia, Louisiana, Mississippi, and South Carolina, has an immediate opening for a Maintenance Technician. Crown Health Care Laundry provides great career opportunities and the chance to utilize your technical skills in an ever-changing environment. Our engineers and maintenance technicians are a critical part of our team to help us accomplish our goal of providing exceptional service to our customers. Successful candidate will have a strong troubleshooting ability in the electrical control field to include PLCs, inverter drives, pneumatics, hydraulics, pumps, bearing, chains and belting, conveying systems, valves, basic blueprint reading, and mechanical troubleshooting. Duties Include Performing preventive maintenance on assigned equipment Record taking of daily meter readings, boiler chemistry, and sanitation Responding to maintenance calls during production hours Repairing machinery in a fast-paced environment with a sense of urgency Assist in training new employees on correct machinery operation Qualifications Two years electrical experience Strong communication skills Flexible schedule which includes weekends, and holidays Have keen acumen relating to safety and quality Must be able to access and navigate all areas of the facilities. Must be able to access all parts of the company equipment. This position requires a proven history of being a positive, self-driven team player who can work at a fast pace in a team-based environment. Salary based upon experience within the engineering field. Mid shift- 2pm- 10:30pm

We are seeking experiencedCrew Leaders to work safely in the field for our Maintenance division.You will be a working team member who oversees all aspects of a crew from start to completion.What would my responsibilities be Supervise all lawn maintenance service activities of the crew,ensuring that all crew members have the required safety material, the training and tools needed to complete the job, and that they are always operating safely.Complete a pre-trip inspection report each day.Coordinate with branch management, customers, and employees as needed.Use landscaping tools and operate heavy equipment as needed. Safely drive crews to and from jobs, adhering to the Company's Safety Policy and ensuring that the public will be safe while in contact with crews.Why Join Yellowstone Competitive hourly pay,paid weeklyBenefits package including health, dental and vision insurance, 401k with a company matchIndustry-leading safety programsCompany provided safety gearEquipped with optimal and most professional equipmentHigh profile customers, worksites, and landscape results -A company that values and appreciates YOURequirementsLegal authorization to work in the United StatesExperience managing a crew consisting of laborers providing landscaping or related servicesMust have reliable transportation to the Branch or first job siteSafe driving record and ability to successfully pass a Motor Vehicle Report (“MVR”) requiredStrong English communication skills. Spanish a plusBecome part of the team dedicated to Excellence in Commercial Landscaping

The pay range per hour is $28.40 - $33.91Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .About the Job:Health Benefits After 14 Days of Employment!Tuition-Free ProgramsAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 1 (MT1), you will maintain and repair automated material handling and facility equipment, and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target mechanics to solve problems, validate quality of work for outside specialty contractors, and meet aggressive time lines. You will collaborate with Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You will operate Target owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies as needed. This is an entry-level position in the technician role with promotion potential to Maintenance Technician 2, by completing and demonstrating proficiency in all related Maintenance Technician 2 job requirements, measured by both hands-on validation and by a written assessment. A successful candidate in this role will:Maintain and perform basic troubleshooting of electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, scales and printer applicatorsDemonstrate mechanical proficiency for hydraulic and pneumatic systems, and AC/DC electrical motors and drivesAdjust, reset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Maintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsPerform preventative maintenance on facility equipment (i.e. Powered Industrial Trucks, HVAC, air compressors and dryers, and balers)Perform basic electrical maintenance and simple repair/replace of various electrical circuits and related electronic equipment, using tools such as multi-meters and infrared thermometers Read and understand basic electrical and electronic schematics[F&B Only:] Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Utilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsCore responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes or cartons up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licenseBasic PC competency and ability to use mobile apps on handheld devicesFamiliar with simple wiring diagrams, symbols and electrical measuring[F&B Only:] Comfortable working in a temperature-controlled environmentExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresCommonly used industrial toolsBasic Carpentry and PlumbingBasic blueprint and schematic readingBasic AC/DC electrical and electronic principlesBasic metal fabrication and weldingBasic Industrial ControlsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with Programmable Logic Control (PLC) programs and Human Machine Interfaces (HMIs)Ability to troubleshoot basic Input/Output functionsExperience with robotic operation/ maintenanceBenefits EligibilityPlease paste this url into your preferred browser to learn about benefits eligibility for this role: https://tgt.biz/BenefitsForYou_C | Pegue esta URL en su navegador preferido para obtener información sobre la elegibilidad de este puesto para recibir beneficios: https://tgt.biz/BenefitsForYou_CAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.

About the RoleAs Field Facilities Specialist, you will perform maintenance and handyman services in Kohl's stores, ensuring company brand standards are maintained. You will meet budgets, communicate effectively with both internal and external customers and perform all work in a quality manner, following all safety rules and regulations.What You’ll DoComplete work orders as assigned by supervisor timely and accurateEnsure all necessary materials and tools to perform daily work are available and kept in good condition (Kohl’s will provide all needed tools)Perform interior store repairs and maintenance with a focus on door (interior and exterior) and plumbing (faucet, toilet, water heater, etc.) repairPerform interior lighting and electrical repairs, including lamp/ballast replacement and minor outlet repairsPerform ooring, carpet, tile, patch and paint, carpentry, laminate, wallpaper, xture and equipment repairsPerform exterior maintenance of the building, including low elevation, building painting, curb/ramp painting, power-washing, and minor common area maintenance repairs Assist stores with housekeeping problem-solving and suggested solutions for store associate teams and contract cleaning providers to increase CLEAN presence in storesCommunicate safety and cleanliness issues and action plans to resolveIdentify interior and exterior maintenance issues that need resolution by exterior vendors and enter issues into Web Based Facilities Management program for assignment and completionCommunicate recaps regularly to the Territory Facilities Manager and/or Store and District Managers of stores visited, wins and opportunities found and issues resolved on store visitsAdditional tasks may be assignedWhat Skills You HaveRequiredAbility to work independently Effective verbal and written communication skills Pro ciency in Microsoft Word and Excel, navigation of websites and ability to utilize new computer systems, including smartphones2-4 years of prior maintenance work with a strong focus on door, plumbing, electrical/lighting and handyman ServicesPrior retail or o ce building maintenance experienceFamiliarity with general maintenance tools and tasksPreferredAbility to repair a variety of other interior/exterior issues as assigned by Supervisor, including equipment and CAM itemsSpecial RequirementsModerate lifting – 25 to 50lbs on a regular basisAbility to travel up to 100% of the time with some overnight stays based on store schedule/locationAbility to climb/work on ladders up to 12ft in height to address lighting, painting, etc. issuesValid driver’s license with a currently registered vehicle

The Maintenance - Mechanic provides advanced mechanical support. Performs a variety of complex technical tasks with mechanical systems.Primary Responsibilities:Performs moderately complex technical functions related to the support of developing engineering activities, such as: Repairing, maintaining, overhauling, modifying, operating and material handling equipment.Installing, dismantling and inspection of electrical, electronic, mechanical, HVAC, and material handling equipment and fixtures.Diagnosing and solving electronic and/or mechanical problems involved in the operation of the system.Recommending modifications to designs as needed.Assists other technicians in the performance of mechanical maintenance activities and/or providing training/guidance.Fabricates mechanical system components, parts and equipment, etc.Isolates malfunctions using established tools and techniques, performs preventive and corrective maintenance on equipment, and returns faulty equipment to operating condition.Logs scheduled inspection reports of the operating equipment, fixed building equipment and building structures, maintenance, repairs and other records and schedules.Actively develops skill blocks to improve personal performance.Core Competencies & Accomplishments:Requires application of special skill, knowledge and pertinent techniques to work assignment.Requires advanced aptitude and experience in various areas of maintenance.Solid understanding of mechanical systems and related components.Requires license to operate mechanical equipment.Advanced knowledge of the principles, methods and techniques used in the fabrication and testing of mechanical components and troubleshooting.Specified license and certifications required.Three years of experience in mechanical field or combination of experience and technical/vocational training.What you get:If eligible, we offer a competitive benefits package including medical/dental/vision, term life insurance, paid vacation/holidays*, and 401(k) with Company match. All associates are eligible for an associate discount on JCPenney merchandise. *For paid vacation days, as well as eligibility requirements for other benefits, please visit About JCPenney:JCPenney is the shopping destination for diverse, working American families. With inclusivity at its core, the Company's product assortment meets customers' everyday needs and helps them commemorate every special occasion with style, quality, and value. JCPenney offers a broad portfolio of fashion, apparel, home, beauty, and jewelry from national and private brands and provides personal services including salon, portrait and optical. The Company and its 50,000 associates worldwide serve customers where, when, and how they want to shop - from jcp.com to more than 650 stores in the U.S. and Puerto Rico. In 2022, JCPenney celebrates 120 years as an iconic American brand by continuing its legacy of connecting with customers through shopping and community engagement. Please visit JCPenney's Newsroom to learn more and follow JCPenney on Facebook, Instagram, Twitter, and LinkedIn.Pay RangeUSD $18.00/Hr -USD $22.00/Hr.

What you will doJohnson Controls Inc. is looking for forward-thinking talent to join our organization to support the fast-growing HVAC business in North America.JCI is committed to the health and safety of all employees, customers, partners, and the communities we serve.At Johnson Controls you’ll have the opportunity to work on some of the most exciting and relevant facilities, HVAC chillers and commercial products in today’s market. Our talented people empower us, and we believe in being part of a team that is open, collaborative, results-oriented, hardworking and above all fun.How will you do itWe are looking for skilled HVAC Technicians who have experience with air cooled and/or water-cooled chillers, Industrial chillers, AHU’s or large roof top ducted units.Preferred experience in Industrial Petro-Chemical, Pharmaceutical, or Data Center vertical environments. We provide factory certification through our Service Technical Academy (STA) with recognition, monetary rewards, and advancement.We offer incentive programs and a #1 focus on employee safety. We also provide tools, uniforms, and a company vehicle to perform your job and service our customers to the highest standard.Provide our customers with the highest level of service to solve facility inefficiencies and resolve service-related items.As a trusted advisor to our customers, you will provide solutions and outcomes at the time of commissioning and aftermarket service. Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. Provide quotes to support recommendations and solutions.What we look forRequiredMust be a member or willing to join the United Association of Journeymen and Apprentices of the Plumbing and Pipe Fitting Industry of the United States and Canada, AFL-CIO. Be a dedicated member of a North America Branch team willing to learn and be responsible for startup, commissioning, and aftermarket services for this fast-growing business.Minimum of Twelve (12) years of practical working experience on air cooled and/or water-cooled chillers, industrial chillers, AHU’s or large roof top ducted units with strong HVAC/ mechanical troubleshooting experience. Can lead large complex repairs, jobs or retrofits.Able to repair centrifugal compressors, steam turbines, absorption chillers, screw chillers and/or ammonia / hydrocarbon system components.Maintain ammonia and hydrocarbon safety training certification.Extensive experience in HVAC systems, (Chilled water loops, Pumping, Compressor enthalpy, Compressor trouble shooting and rebuild.Mechanical shaft alignment using dial indicators, lasers, etc. of pumps, fans, Compressors.Able to use vibration equipment to trouble shoot compressor drivelines.Proficient in the operations, trouble shooting and repair of large tonnage chiller 460 vac VSD’s and medium voltage 4160 vac VSD’s.Proficient in multiple OEM chiller panels and controllers.Able to trouble shoot industrial Allen Bradley control systems and adjust.Travel maybe required 10% to 20% to support Branch Customers startup and commissioning activities as well as aftermarket service trouble shooting.You will be required to pass a knowledge examination to assess proficiencies.Opportunity to invest in career development. You will enroll in training programs to gain knowledge in HVAC products and sales quoting.You will work with other local market mechanics and when necessary, provide on the job training and or will participate and be a leader in local relevant classroom training for other Technicians.Attention to detail through interpersonal, digital, and written skills.Able to write and communicate to the customer problem, cause, and corrective actions.Able to provide quotes to customers and participate in JCI’s Service Plus Rewards program.Self-starter with a passion/ desire to learn and apply on the job.Prioritize safety in all formsUniversal EPA refrigerants license, applicable state or local licensing, and valid driver's license

The pay range per hour is $33.40 - $39.76Pay is based on several factors which vary based on position. These include labor markets and in some instances may include education, work experience and certifications. In addition to your pay, Target cares about and invests in you as a team member, so that you can take care of yourself and your family. Target offers eligible team members and their dependents comprehensive health benefits and programs, which may include medical, vision, dental, life insurance and more, to help you and your family take care of your whole selves. Other benefits for eligible team members include 401(k), employee discount, short term disability, long term disability, paid sick leave, paid national holidays, and paid vacation. Find competitive benefits from financial and education to well-being and beyond at .About the Job:Health Benefits After 14 Days!Tuition-Free ProgramAbout us:Working at Target means helping all families discover the joy of everyday life. We bring that vision to life through our values and culture. .A role in a Supply Chain Facility means being on the very front lines of getting product to the guest as fast as possible—a critical differentiator and one of the most essential Logistics functions. You’ll reach beyond the bounds of your team to partner across the enterprise and find solutions to support the business. Whether it’s through focusing on our regional or upstream distribution centers, import warehouses, or fulfillment and flow centers, you’ll have a chance to positively impact thousands of fellow team members and Target guests worldwide, further differentiating Target from all the rest.As an Engineering & Facilities Maintenance Technician 2 (MT2), you will assist in the installation, maintenance, and repair of automated material handling equipment and ensure high equipment availability rates. You will use preventive and predictive maintenance processes, and rapidly troubleshoot equipment breakdowns and quickly restore equipment to service to support the successful operation of the supply chain facility. You will work with other Target service technicians to solve problems, validate quality of work for outside specialty contractors, work with building leaders to optimize material handling equipment, and meet aggressive time lines. You will collaborate with Maintenance Technician 3s and Senior Systems Engineers to perform Root Cause Analysis for equipment failures. You may also assist in training other maintenance technicians and technician trainees to enhance their technical skills and job knowledge. A successful candidate in this role will:Maintain and troubleshoot all electrical and mechanical aspects of Material Handling Equipment (MHE) on site, including conveyor systems, sortation, robotics, or Automated Storage and Retrieval Systems (ASRS)Adjust scanners, cameras, field buses, scales and printer applicatorsReset, repair, or replace adjustable components (belts, chains, cables) and wearing components (guides, bearings, wheels, rollers, pulleys)Clean, lubricate, and calibrate equipmentUse appropriate job plans, procedures, and manualsMaintain and troubleshoot motors, photo eyes, relays, proximity sensors, solenoids, motor starters, tachometers, encoders, etc.Assist with basic electronics/ Programmable Logic Controls troubleshootingConduct maintenance and basic troubleshooting of all types of industrial robotsUtilize handheld devices and asset management system mobile apps to create and close Work Orders with appropriate data (labor hours, downtime, problem/cause/remedy, and parts used)Develop and maintain positive working relationships across all levels of the organizationFollow appropriate safety procedures and use Personal Protective Equipment (PPE) while maintaining equipment (Lock Out/Tag Out, Arc Flash, etc.), and ensure a safe work environment by eliminating potential equipment safety hazardsOperate Target-owned vehicles to complete maintenance activities on the exterior of the facility and within the trailer yard, as well as travel to nearby facilities and local stores to procure parts and supplies[F&B Only:] Execute sanitation and maintenance standards that support the health of industrial ammonia refrigeration Core responsibilities of this job are described within this job description. Job duties may change at any time due to business needs.About you:Physical Demands (must be able to perform with or without reasonable accommodation):Regular bending, lifting, stretching and reaching both below the waist and above the headLift and move totes up to 49 pounds eachWalking within and around the site with great frequencyAbility to climb ladders and gangways safely and without limitation, and work off platforms and equipment at significant heightsFull manual dexterity in both hands and wrists, eye/hand coordination, feet (foot pedals), manual (picking, pinching, holding, grasping), and wrist motion (repetitive flexion/rotation)Working conditions may include small spaces, dust, fumes/odors, hot/cold temperatures, inside/outside noise, vibration, standing on concrete for long hours and wet or uneven surfacesAbility to stand/walk for up to 10-12 hoursQualifications:High school diploma or equivalent requiredPossess or ability to obtain a valid driver’s licensePC competency and ability to use mobile apps on handheld devicesFamiliar with wiring diagrams, symbols and electrical measuring[F&B Only:] Comfortable working in a temperature-controlled environmentExperience in the following areas:Work order managementPreventive/predictive maintenance proceduresBasic blueprint and schematic readingElectrical and electronic principlesBasic metal fabrication and weldingIndustrial Controls and ElectronicsAbility to troubleshoot basic Input/Output functionsProgrammable Logic Control (PLC) programsDesired:Degree from a vocational school or college with a focus in the Mechanical or Electrical field2+ years apprenticeship or equivalent experience in the Mechanical or Electrical fieldExperience with automated conveyor systems and controlsExperience with Material Handling Equipment (MHE) safety standardsExperience with robotic operation/ maintenanceBenefits EligibilityPlease paste this url into your preferred browser to learn about benefits eligibility for this role: https://tgt.biz/BenefitsForYou_C | Pegue esta URL en su navegador preferido para obtener información sobre la elegibilidad de este puesto para recibir beneficios: https://tgt.biz/BenefitsForYou_CAmericans with Disabilities Act (ADA)In compliance with state and federal laws, Target will make reasonable accommodations for applicants with disabilities. If a reasonable accommodation is needed to participate in the job application or interview process, please reach out to candidate.accommodations@HRHelp.Target.com.

OverviewMaintenance Supervisor The Maintenance Supervisor will support and assist Supply Chain Sr Maintenance Manager/Maintenance Manager with day-to-day maintenance activities within the logistics center to ensure they are completed in a timely manner consistent with Supply Chain standards and at the lowest feasible cost.Primary Responsibilities:Manages the maintenance and preventive maintenance programs for all electrical, mechanical and energy related equipment to ensure safe operation with minimum downtime due to equipment failure.Works with logistics center Operations team to schedule maintenance, installation, capital improvements and coordinates manner to ensure customer service and production are not compromised.Manages availability of spare parts, maintenance and housekeeping supplies, janitorial services and other services related to building maintenance and grounds upkeep. This includes working with external contractors and suppliers for skills/services not available within the maintenance department.Works closely with the Maintenance and Engineering Support (MES) team to ensure consistency and SOPs are followed to optimize efforts across the Supply Chain Network Maintenance organizationEnsures proper documentation and prioritization of work orders in the MP2 Maintenance system and provides a safe and efficient work environment.Ensures for the proper training and equipping of the maintenance staff; develops Associates skills and technical knowledge.Leverages basic knowledge of OSHA/EPA (Hazmat) regulations, as well as working with the JCP Health and Safety team, to ensure facilities are in compliance with federal and local regulations. Participates in compliance programs, hazardous material handling, facility energy management and conservation, scrap/trash disposal and waste recycling programs at the logistics center.Works closely with Logistic engineering management and external suppliers relative to the development of capital project bids to ensure adherence to Supply Chain maintenance policies, procedures, and standards.Contacts private and governmental agencies for special functions, including such things as building code conformity, insurance inspections, road repairs, utility upkeep and safety activities.Core Competencies & Accomplishments:Education: College degree (Mechanical or Engineering fields) preferred. Equivalent position experience will be considered.Experience: 2-3 years background in facility/equipment maintenance.Core Competencies: Communication, Decision-Making, Customer Focused, Adaptability, Drive for ResultsPositional Competencies: Strong knowledge of MHE systems, strong leader of technical teams and expertise in maintenance processes. Must be flexible and have a strong sense of urgency, strong problem-solving skills a plus.Software Skills: Experience with CMMS or EAM systems (Infor/MP2 preferred), basic Office software skills, knowledge of AutoCAD or reading drawings is a plus.What you get: Eligible for bonus under the Management Incentive Plan.If eligible, we offer a competitive benefits package including medical/dental/vision, term life insurance, paid vacation/holidays*, and 401(k) with Company match. All associates are eligible for an associate discount on JCPenney merchandise. For paid holidays, associates who are eligible for paid vacation (MTO) are also eligible for eight paid holidays during the calendar year. *For paid vacation days, as well as eligibility requirements for other benefits, please visit About JCPenney: JCPenney is the shopping destination for diverse, working American families. With inclusivity at its core, the Company’s product assortment meets customers’ everyday needs and helps them commemorate every special occasion with style, quality, and value. JCPenney offers a broad portfolio of fashion, apparel, home, beauty, and jewelry from national and private brands and provides personal services including salon, portrait and optical. The Company and its 50,000 associates worldwide serve customers where, when, and how they want to shop – from jcp.com to more than 650 stores in the U.S. and Puerto Rico. In 2024, JCPenney celebrates 122 years as an iconic American brand by continuing its legacy of connecting with customers through shopping and community engagement. Please visit JCPenney’s to learn more and follow JCPenney on , , and . #storeswrap Pay RangeUSD $54,000.00 - USD $68,000.00 /Yr.