Bessemer, AL 35022 • (40.9 miles) • Full Time • 9/18/2026

Manufacturing and Fabrication-Utility OperatorFull-TimeLocation: Bessemer, ALOverview Consolidated Pipe & Supply is a national leader in piping, fittings, valves, and all accessories for the energy, oil, gas, water, sewer, utility, and construction industries. We strive to be the best infrastructure and industrial supply company in the United States. We do this by sourcing, distributing, and manufacturing only top-quality products while fostering a climate where people from all backgrounds - employees and customers alike - can thrive.We are looking for the right candidate to fill a Manufacturing and Fabrication - Utilityposition at our ductile iron fabrication facility in Bessemer/McCalla, AL.This is a unique opportunity to join and contribute to a growing operation, directly impact produc

Birmingham, AL 35217 • (19.7 miles) • Full Time • 9/17/2026

Description: National Mill Maintenance (NMM) is a reputable company known for its exceptional fluid power and maintenance services. Founded in 2017, NMM has established itself with four locations, including its headquarters in Birmingham, AL, and facilities in Mobile, AL, Blytheville, AR, and Manilla, AR.NMM is seeking a talented Millwright, to work on a temporary basis, who will be responsible for inspecting, repairing, and maintaining industrial machinery.After 90 days of employment, there will be potential for this job to convert to a full-time role.An Ideal Candidate will:Work SafelyAccurately operate machinery and equipmentFollow work instructions to fabricate partsRead blueprints and schematics Requirements: At least 1 year of dedicated Millwright experienceAbility to interpret and u

Birmingham, AL 35233 • (25.8 miles) • Full Time • 9/17/2026

Senior Mechanical Project ManagerCreature is a vertically integrated Design–Manufacture–Construct (DMC) company headquartered in Birmingham, AL. We replace the century-old, siloed model of the Architecture, Engineering, and Construction (AEC) industry with one disciplined system design, manufacturing, and field execution operating as a single team, not a chain of handoffs. Our in-house Mechanical, Plumbing, and Carpentry trades are the backbone of that system, and the reason Creature delivers medical and commercial facilities faster, safer, and to a higher standard than a traditional general contractor.Purpose of the RoleOwn the mechanical value stream P&L, schedule, labor, and quality for Creature’s HVAC and plumbing self-perform work across the medical and commercial portfolio. This is n

Birmingham, AL 35211 • (31.3 miles) • Full Time • 9/17/2026

PURPOSE OF POSITION: The Sheet Metal Mechanic performs the installation, fabrication, assembly, and maintenance of sheet metal components and HVAC systems on commercial, industrial, or residential construction projects. This role is rooted in a strong commitment to safety, quality, and craftsmanship, ensuring all work is completed accurately, efficiently, and in full compliance with project specifications, codes, and company standards.The Mechanic demonstrates teamwork and accountability by working independently or collaboratively as part of a crew, contributing positively to jobsite productivity and morale. With a focus on integrity and professionalism, the position supports foremen and project leadership, communicates clearly, follows instructions reliably, and takes ownership of assigne

Cullman, AL 35055 • (31.5 miles) • Full Time • 9/17/2026

Rehau | Water Technologies is seeking a skilled Extrusion Machine Operator to join our team in Cullman, AL. This position is responsible for operating extrusion equipment to produce PEX pipe, ensuring product quality, troubleshooting issues, and maintaining a safe and efficient production process. The ideal candidate is mechanically inclined, detail-oriented, and comfortable working both independently and as part of a team.Key Responsibilities:Operate and monitor extrusion machines to produce PEX pipe according to company specifications.Set up, adjust, and troubleshoot equipment to ensure smooth operation and minimal downtime.Perform hourly quality checks to verify product dimensions, appearance, and other critical factors.Use computers and production software to track job progress, input

Fairfield, AL 35064 • (32.5 miles) • Full Time • 9/17/2026

United States Steel – Tubular Operations has an immediate opening for a Part-time Test Proctor.This position is a part-time contract to potential full-time position, working onsite at the U. S. Steel location in Fairfield, Alabama. It is not for a direct hire into U. S. Steel, rather will be employed part-time as a contractor. The Part-Time Test Proctor is responsible for administering/proctoring written tests for our open positions.Compensation: $18.00Responsibilities:• Assign test session IDs.• Register candidates upon arrival.• Read test instructions.• Ensure test rules are followed.• Score tests upon completion.• Report results to the HR and Talent Acquisition teams.• Support hiring events by assisting with documentation collection, administrative tasks, candidate coordination and othe

Pelham, AL 35124 • (35.3 miles) • Full Time • 9/17/2026

Project Manager - CDBG-DR Compliance & Quality Project Location: Maui, HawaiiTravel: Typically approximately one week per month in Maui, with the schedule subject to change based on project needs.Position SummaryTimberline Construction Group is seeking an experienced Project Manager to support a CDBG-DR single-family housing reconstruction program in Maui.This is not a traditional Superintendent role. The position requires strong residential construction knowledge with a primary focus on compliance, QA/QC, documentation, inspections, reporting, Section 3 and project tracking.Key ResponsibilitiesCoordinate compliance and QA/QC activities with project teams and contractorsReview and consolidate construction reports for Canopy reportingTrack schedules, inspections, billing milestones, change

Arab, AL 35016 • (38.8 miles) • Full Time • 9/17/2026

The Manufacturing Engineering Technician supports new product releases and manufacturing operations through CNC program development, machine setup, first-piece production, operator training, and manufacturing engineering activities. This position works closely with Quality, Production and ES&H to ensure new products are properly programmed, tested, documented, and successfully transitioned into production..GENERAL DUTIES AND RESPONSIBILITIES:Develop CNC and/or machine programs for new product releases and engineering changes.Set up, test, and prove out new programs prior to release to production, making necessary adjustments to ensure programs produce quality parts efficiently and consistently.Coordinate and support the production of test and development pieces for new products, including

Birmingham, AL 35210 • (18.8 miles) • Full Time • 9/16/2026

Do you have the need for speed? Do you thrive in a fast paced, energetic work environment that focuses on serving our customers? If so, K1 Speed is the place for you. As the nation’s indoor electric karting leader and innovator for over the past decade, K1 Speed does not compromise on the quality and value of the product we offer. Through our industrial go-karts and excellent staff, our passion is to show the world how fun karting can actually be. As a Track Operator, you will be at the core of the day to day operations, leading and guiding our customers to a fun, safe karting experience. Is this you?Duties and Responsibilities:Provide excellent customer service to all K1 Speed visitorsRun races precisely, on time and safelyMaintain track cleanliness at all timeslifting requiredStanding fo

Birmingham, AL • (24.8 miles) • Full Time • 9/16/2026

Company Description Founded in 2004, P&S Transportation is one of the fastest growing flatbed trucking operations with terminals nationwide.We are continuously expanding and improving our services through our commitment to hiring the best and brightest in the Logistics and Transportation field.By targeting experienced professionals, partnering with the best universities and recruiting straight from the top programs in logistics and operations, we support our vision to be on the cutting edge of transportation.Our goal is to stay ahead through our emphasis on driver satisfaction and retention, cutting edge technology, offering creative solutions, customer partnerships and smarter people than our competition.Our business is growing exponentially and we require the best to help us continue on

Helena, AL 35080 • (43.5 miles) • Full Time • 9/16/2026

Supervisor Role Overview Supervisors are expected to take ownership of their area, drive their own development, and lead others to achieve strong business results. They focus on operational excellence while sharpening key leadership skills such as communication, time management, and coaching.By executing business plans, meeting goals, and enhancing the guest experience, Supervisors set the standard for the entire team. They can be recognized by Chick-fil-A Leadership attire

Birmingham, AL 35217 • (19.7 miles) • Full Time • 9/15/2026

Join Our Team at voestalpine Railway Systems Nortrak!Embark on a rewarding career journey with voestalpine Railway Systems Nortrak, North America's premier designer and manufacturer of special trackwork. With a legacy spanning 160 years, we lead the industry in shaping the future of rail solutions. As part of the voestalpine Railway Systems global network, we are committed to delivering quality products and services, including rails, turnouts, fastening systems, signaling technologies, and monitoring solutions. Operating with a presence across Canada, the US, and Mexico, we prioritize the well-being of our people, global mobility, and sustainability and innovation.Our people are the foundation of our success. Skilled, motivated, and results-driven individuals shape our culture demonstratin

Birmingham, AL • (24.8 miles) • Full Time • 9/15/2026

EXPERIENCED AUTOMOTIVE TECHNICIANS WANTEDTired of corporate red tape, endless meetings, and being treated like a number instead of a professional?We're looking for experienced automotive technicians who take pride in their work and want to be part of a shop where skill, productivity, and attitude are valued. This is an opportunity to join a high-performing team with excellent earning potential, strong leadership, and a culture built around supporting technicians, not slowing them down.What We Offer: Top earning potential for experienced technicians Consistent workflow and plenty of hours Modern equipment and a well-equipped shop Supportive management that understands the service business No corporate micromanagement Opportunities for growth and advancement A team environment where good tec

Birmingham, AL • (24.8 miles) • Full Time • 9/15/2026

Responsibilities• Install, configure, and troubleshoot access control systems including card readers, door controllers, and credential management platforms• Pull and terminate low-voltage cabling associated with access control infrastructure• Conduct site surveys and coordinate with project managers and engineers• Complete installation documentation and quality assurance reports• Perform system testing and commissioning upon project completionRequirements• Minimum 3 years of verifiable experience installing and servicing access control systems• Familiarity with industry-recognized platforms (Lenel, Software House, Genetec, Honeywell, or similar)• Experience with low-voltage cabling and termination practices• Basic computer skills and proficiency with Microsoft Office (Word, Excel, Outlook)

Birmingham, AL 35233 • (25.8 miles) • Full Time • 9/15/2026

Description: ALG Label & Graphics is seeking a hands-on, floor-focused 2nd Shift Production Lead to support daily production execution in a fast-paced, quality-driven manufacturing environment. This role is responsible for leading a team of production employees across finishing, digital, flexographic, and screen printing operations. The Production Lead is a key on-shift leadermaintaining production flow, supporting employee development, ensuring quality standards are met, and addressing issues in real time. This position serves as a critical link between the production floor and operations leadership, helping ensure a smooth, accountable, and safe second shift.Key ResponsibilitiesProduction OversightMaintain an active, visible presence on the production floor throughout the shift.Coordinat

Birmingham, AL 35205 • (26.7 miles) • Full Time • 9/15/2026

CNCBurnTableOperator(Multiple Shifts Available)Pennsylvania Steel CompanyBirmingham, ALWe are seeking CNC Burn Table Operators to join our Birmingham, Alabama Division of Pennsylvania Steel Company.About Us:Pennsylvania Steel is one of thelargest independently owned Steel Service Centers in the U.S., with 12locations from Connecticut to Alabama. We're proud of our53-year legacyand the people who drive it forward every day.We are hiring for multiple shifts on a full time, permanent basis.Main Duties/Responsibilities: Operate CNC-controlledburntableto cut steel plate and sheet metal according to job specifications. Load and unload material using material handling equipment. Interpret work orders, blueprints, and CAD files to set up machine parameters. Monitor machine operations and make adju

Birmingham, AL 35243 • (27 miles) • Full Time • 9/15/2026

Leading conducting mechanical design activities on combined cycle projects including pipe sizing and routing, material selection, pipe support design, valve selection, P&ID development, equipment layout, equipment specifications, and hydraulic calculations, developing datasheets for valves and other equipment, providing technical direction to designers, developing project scopes, schedules and budgets, making sound independent decisions with minimal information, and assisting in checkout and startup of systems when necessary.RequirementsBS in Mechanical Engineeringexperience with design of new construction and/or retrofit of power generation or heavy industrial facilities and the ability to take the lead role for detailed design activities, significant knowledge of mechanical engineering d

Birmingham, AL 35243 • (27 miles) • Full Time • 9/15/2026

Are we the road to your future? We are currently searching for an experienced CEI Inspectorto support ourGulf Regionlocated inAlabama. Experience in environmental and/or waterline construction is a plus. What you’ll be doing:Inspection for compliance with contract documents, standards, and specificationsTesting of materials; review of plans; analysis of engineering-related data; and construction survey/layoutKeeping daily diaries on project operations, resolves daily constructability issues and trouble shoots problems to mitigate delays to contractor’s progressMonitors contractor's daily operations and performs and/or reviews test reports to ensure that all work and materials conform to specifications, plans and contractual provisions. Also monitors utility relocation efforts by inspectin

Cullman, AL 35055 • (31.5 miles) • Full Time • 9/15/2026

Working at Pizza Hut is about making hungry people happy. It's about being independent and having fun, making new friends and earning extra cash. As a Pizza Hut team member, you can be the smiling face that greets and serves the customers, or a cook who make things happen in the kitchen. Working with us will give you the financial rewards and flexibility to suit your lifestyle. You'll learn new things, get recognized for your efforts and learn skills that last a lifetime.WHAT ARE WE LOOKING FOR?The good news is that your training will teach you everything you need to know to succeed on the job. But there are a few skills you should have from the get-go:You're a fun and friendly person who values customers and takes absolute pride in everything you do. Communication skills are key – you sho

Cullman, AL 35055 • (31.5 miles) • Full Time • 9/15/2026

The Foundry Mission:The Foundry Ministries exists to restore hope and rebuild lives through Christ-centered recovery.The Foundry Vision:Permanently transformed lives through Christ-centered ministries.Assistant Manager, Production Position Summary:The Assistant Manager, Production, oversees the sorting, evaluation, and pricing of all donated items. These items include clothing, shoes, and accessories; domestics; showcase items; and household goods.The Assistant Manager, Production, supports the training and supervision of program participants assigned to the Production department. Training includes an Employment Readiness overview, specific assignment training (staff and program participants), sales, recycling, and discarding.The Assistant Manager, Production, meets with the team to discus

Talladega, AL 35160 • (34.8 miles) • Full Time • 9/15/2026

Process Technician 2nd Shift Reports To:Group Leader/Supervisor/ManagerDescription:Under the direction of the group leader, supervisor or manager the lead technician is responsible for the processing, setup and trouble shooting of the machines in their assigned work area. They are responsible for ensuring adherence to safety, quality, housekeeping, and company policies, procedures and standards.Responsibilities:Responsible for all processes, equipment, preventative maintenance, safety and housekeeping of the assigned work area and meeting established procedures and standards.Organizes work for smooth operations, analyze problems, implements solutions and reports process and equipment problems to the group leader, supervisor or manager.Responsible for processing and trouble shooting of all

Anniston, AL 36201 • (34.9 miles) • Full Time • 9/15/2026

CQCM is responsible for establishing and maintaining the quality of work and control of the construction activities, and of implementing the Quality Control Plan for the project. The CQCM will assist in developing work plans and is responsible to verify that all features of work are in compliance with the contract requirements.Quality Control System (QCS) Manager – QC will input and/or track that all pertinent information is being included in the QCS daily. This includes but is not limited to Contract Administration, Finances, Quality Control (Daily Reports, Deficiency Reports, Requests for Information (RFIs)Work Plans, Accident Hazard Analysis (AHA), etc.), Submittals, Scheduling, Data Import/ExportSets up field filing system and maintains during the life of the projectDrafts, maintains,

Birmingham, AL 35244 • (35 miles) • Full Time • 9/15/2026

Hazen & Sawyer is seekingan Electrical Engineer for ourBirmingham office with 0-4 years of experience.Qualified candidates should have an interest in industrial power design, including medium and low voltage electrical power distribution, generator design, motor control, VFDs, lighting systems, equipment layout, and related activities. Candidates should have a basic understanding of the NEC and related Codes. Candidates must have good communication skills, including interaction with senior engineers, clients, and contractors (for experienced candidates).Why Hazen and Sawyer:Founded in 1951 by the son of Allen Hazen (developer of the Hazen-Williams equation), we are an employee-owned company with a singular focus on "all things water."Our work includes planning, design, and oversight of con

Pelham, AL 35124 • (35.3 miles) • Full Time • 9/15/2026

Bring craftsmanship to life, one stitch at a time, as a Sewing Operator at Gabriella White.If you enjoy working with your hands, take pride in quality, and like being part of a team that creates something tangible every day, this could be a great fit. As a Sewing Operator, you will help produce high-quality cushions, pillows, and related products using industrial sewing equipment. You will follow patterns and work orders, work with a variety of fabrics, and play an important role in keeping production moving safely and efficiently.We are looking for someone dependable, detail-oriented, and eager to learn, whether you are continuing to build your sewing skills or bringing experience from another production environment.Who We AreGabriella White is home to our family of brands - Gabby and Sum

Pelham, AL 35124 • (35.3 miles) • Full Time • 9/15/2026

CentiMark Corporation, the nation’s leader in the commercial/industrial roofing industry, has an exceptional opportunity for an entry-level RoofingTechnical Inspectorto support Sales Representatives in the greaterBirmingham area.This position pays $50k - $55k plus premier benefits and annual bonus opportunity.Job Summary:Travel to customer’s locations and inspect commercial roofsCommunicate with customers and check roofs for problem areasMeasures commercial roofs and estimate the amount of roofing material and labor needed to re-roofWill work closely with the sales force to provide them with accurate information for the creation of proposals for customersCandidate Requirements:Computer skills (proficient in MS Word, Excel and Bid Estimating Software)General construction, roofing and/or con

Gadsden, AL 35904 • (35.4 miles) • Full Time • 9/15/2026

Description: Job Overview:The Plant Manager will be responsible for overseeing all aspects of operations at the chemical manufacturing facility, ensuring safety, efficiency, and regulatory compliance. This role includes supervising staff, managing schedules, conducting safety training, maintaining inventories, overseeing equipment and vehicle maintenance, and coordinating rail operations. The Plant Manager will also ensure proper PPE usage, investigate incidents, and communicate operational needs to management.Duties/Responsibilities:Supervise and coordinate activities of plant employees involved in the transfer, handling, and storage of chemicals used in manufacturing.Manage the schedules of the plant’s employees to meet customer demand.Review and approve employee timecards for payroll pr

Gadsden, AL 35904 • (35.4 miles) • Full Time • 9/15/2026

Our team is expanding and looking to add a Launch Project Manager. We are seeking a dynamic and driven candidate interested in joining a rapidly growing global automotive company.The Launch Project Manager will act as the primary liaison between the factory and its key clients. Additional responsibilities include:1. Development Phase (Pre-SOP): Project Launch & Planning: Lead project kick-off meetings, develop a detailed master project schedule, and define key milestones, deliverables, and resource requirements for all phases.APQP Process Leadership: Strictly drive the five phases of APQP, ensuring all deliverables (FMEA, Control Plans, Process Flow, PPAP, etc.) are completed on time and to standard.Primary Technical Customer Interface: Serve as the main liaison with the customer's enginee

Bessemer, AL 35020-4169 • (39.4 miles) • Full Time • 9/15/2026

Description: BLOX is creating the tools to convert a resistant Architecture Engineering and Construction Industry into a smart and efficient machine. For those motivated to play a part in that change, this is an exciting time at BLOX. In short, BLOX takes the most complicated parts of a hospital – headwalls, surgery ceilings, MEP racks, Central Energy Plants, exam rooms, bathrooms, etc. - designs them so that they can be removed from conventional construction, manufactures them as modules, transports and inserts them into the construction process to yield higher quality buildings that open significantly faster than those conventionally constructed. BLOX is both service and product that includes architecture, engineering, manufacturing, logistics and construction.BLOX is looking for a talen

Bessemer, AL 35023 • (40.9 miles) • Full Time • 9/15/2026

*Benefits Eligibility: This position is eligible for benefits beginning the first of the month following your hire date.*Recruiting Agencies: Thorpe Specialty Services does not accept unsolicited resumes from recruiting agencies.Craftsman have a solid background in specialty craft work within an industrial environment and be capable of working independently and leading small teams. A Craftsman will take on tasks such as fabrication, installation, and repair of specialized industrial systems or equipment.Role and ResponsibilitiesIndependently fabricate, install, and maintain specialty systems and equipment, according to project specifications.Read and interpret blueprints, schematics, and technical drawings to plan and execute tasks with precision.Use advanced hand tools, power tools, weldi

Birmingham, AL 35210 • (18.8 miles) • Full Time • 9/11/2026

Do you enjoy working on cars, computers, gaming systems, 3D printers, robotics, electronics, or simply figuring out how things work? We are looking for someone who is naturally technical, mechanically inclined, comfortable with computers, and enjoys hands-on problem solving.This position combines computer-based work with hands-on manufacturing in a fast-paced, quality-driven production environment. Previous CNC or machining experience is a plus, but technical aptitude and the ability to learn are just as important.SHIFT: 2:00 PM - 11:00 PM Monday - FridayPAY:$18.00 per hourResponsibilitiesUse computer-based CAM software and specialized manufacturing equipmentProcess production orders to precise customer specificationsLearn established machining processes, tooling, and fixturesFollow detail

Adamsville, AL 35005 • (32.4 miles) • Full Time • 9/11/2026

Tool & Die Maker – Metal Stamping CompanyLocation: AL. | $30/hr to $40/hr Pending Experience + OT + Relocation Assistance (Great Package!)There is NO SPONSORSHIP being considered for this job role. If you need sponsorship NOW or in the FUTURE - PLEASE DO NOT APPLY.If You Don't Have Tool & Die Experience in the Automotive OEM or Tier 1 World - "Please Don't Apply"Benefits: Full health coverage, 401k, PTO, great team environmentWe're a fast-growing company that makes precision parts for cars. We're looking for experienced Tool & Die Makers to help us build and maintain the tools we need to launch new products.What You’ll Do:Build and fix metal stamping dies (progressive, transfer, and deep draw).Work with other departments to get dies ready for production.Solve problems with dies quickly on

Anniston, AL • (38.5 miles) • Full Time • 9/11/2026

Company Description Tyler Union in Anniston, AL offers great opportunities, pay, and benefits!We are seeking CNC Machinists to set up, operate, and monitor CNC equipment to machine ductile iron components with precision and consistency, while maintaining a strong focus on safety for yourself and others. Our team follows The McWane Way principlesSafety, Environment, Communication, Teamwork, Trust, Excellence, Accountability, and Leadership.Weekend Shift CNC Machinist employees start at $24.24 per hour plus a $3.50 per hour shift premium!We offer low-cost medical insurance, dental coverage, life and AD&D insurance, short-term disability, a company-matched 401(k) plan, and ten (10) paid holidays. Employees are eligible for five (5) vacation days after six (6) months of continuous employment.T

Moody, AL 35004 • (11.1 miles) • Full Time • 9/10/2026

Ready to rebuild big ironmanually? Role: Manual Machining Specialist Large Vacuum Pump OverhaulWhere: Moody, AL (On-site) | Hours: Mon–Fri, 6:00 a.m.–4:30 p.m. What if your next setup powered life sciences, clean energy, and critical infrastructure? At Ingersoll Rand, our mission-critical flow creation technologies enable productivity and sustainability across industries. With a 160+ year legacy and the drive of a startup, we move fast, think like owners, and support you with the tools to do the best work of your career. What you will do Set up and run large Vertical & Horizontal Lathes to repair and overhaul large Liquid Ring Vacuum Pumps and compressors.Use prints to determine critical dimensions; verify work with micrometers, vernier calipers, dial indicators, and other precision instru

Birmingham, AL 35209 • (28.3 miles) • Full Time • 9/10/2026

Benefits:A positive and collaborative work environmentVoluntary Life InsuranceShort and Long Term DisabilityMedical, Dental and Vision401K Matching (after 6 months of employment)Company work truck is provided* offered after 60 days of employmentCompany Overview Generator Supercenter is the company for all your generator needs. We provide high-quality models, have factory certified technicians for repairs and maintenance, and offer turnkey installations. We are the number #1 Generac dealer in North America and are a leading provider of energy solutions committed to making a positive impact on our customers and environment. We specialize in energy solutions offering cutting-edge technologies to help our clients utilize clean, renewable energy for savings from the grid and backup power. Our e

Gadsden, AL 35904 • (35.4 miles) • Full Time • 9/10/2026

Career Launch Program: Operations Management – Inteva Products LLCProgram Description:Our Career Launch Program (CLP) is designed to attract new graduates from leading universities, bringing emerging talent into our company to drive ongoing growth. The program emphasizes hands-on learning within a fast-paced automotive manufacturing environment. We believe that the most effective operations professionals have a comprehensive understanding of our business, gained through experience in various functional areas. Therefore, the CLP is structured as a rotational program, allowing participants to gain valuable experience with the support of their function.As a Career Launcher, you will rotate through various functional and cross-functional areas, such as Quality, Production Control & Logistics,

Anniston, AL • (38.5 miles) • Full Time • 9/10/2026

Company Description M&H Valve Company is a world-class manufacturer of water and wastewater materials including fire hydrants, resilient wedge gate valves, butterfly valves and check valves. Since 1854, M&H has developed a reputation for excellence and dependability. Our extensive facilities and innovative technologies have made us a business and community leader. From state-of-the-art environmental upgrades to advanced training initiatives and community outreach, we’re working every day to make sure that M&H Valve is the best in the business. M&H Valve Company is part of Birmingham, AL based McWane, Inc.Click here to take a Facility Tour.All candidates offered employment must submit to a drug screen, physical, and background check.Job Description Supervises and coordinates activities of t

Springville, AL • (0 miles) • Full Time • 9/9/2026

C. A. Russell Auto Group - Mobile Service Technician Description of the Role: We are looking for a dedicated and skilled Mobile Service Technician to join our team in Springville, AL. As a Mobile Service Technician, you will be responsible for servicing and repairing Ford vehicles at customer locations. Responsibilities: Perform routine maintenance and repairs on Ford vehiclesDiagnose and troubleshoot vehicle issuesCommunicate effectively with customersProvide exceptional customer service Requirements: Valid driver's licenseCertification as an Automotive Service TechnicianExperience working with Ford vehiclesStrong communication skills Benefits: Uncapped earning capabilitiesHealth insurance401(k) retirement planPaid time off About the Company: The C. A. Russell Auto Group is a leading For

Birmingham, AL 35218 • (29.9 miles) • Full Time • 9/9/2026

OverviewWHY COOLSYS?At CoolSys, we offer more than just a jobwe provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America’s Greatest Workplaces! As a large company serving diverse customers, we invest in our team with:Competitive Compensation: $25-42 / HR DOESign on Bonus: Up to $3,000.00 DOEOngoing Education & Training:Access to state-of-the-art facilities and paid online training.Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match.Year-Round, Diverse Work:Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing.Extra Perks:Quarterly bonus plan, tuition reimbursement, e

Birmingham, AL 35209 • (28.3 miles) • Full Time • 9/9/2026

PRIMARY JOB FUNCTION – Linen TechnicianThe primary purpose of the Linen Distribution Technician position is to ensure daily responsibilities are completed in a safe, timely, and efficient manner.DUTIES AND RESPONSIBILITIESTake direction from the Linen Distribution Manager (LDM) and complete duties and expectations in a safe, timely, and efficient manner. This can include, but is not limited to:Working the assigned schedule without delay, tardiness, or absenteeism;Completing assigned job duties including delivering of clean linen in a neat and orderly fashion, collection and transportation of soiled linen, accurate recording inventories and quantities of linen, and organizing and cleaning the linen storage areas in accordance with Crown policies and procedures and specific instruction from

Horton, AL 35980 • (29 miles) • Full Time • 9/9/2026

Planning & Production ControllerLocation: Albertville, AlabamaHow would you feel about providing high-end, end-to-end aviation services while playing a key role in coordinating aircraft maintenance operations? A career where your organizational skills, aviation knowledge, and attention to detail directly contribute to keeping aircraft maintenance projects organized, compliant, and on schedule.At Aviation Service Partners (ASP), we believe in empowering our team members and providing opportunities to grow while supporting some of the aviation industry's most demanding maintenance programs.Aviation Service Partners is seeking an experienced Planning & Production Controller to join our team in Albertville, Alabama. This position will serve as a central coordination point for aircraft maintena

Birmingham, AL 35216 • (29.8 miles) • Full Time • 9/9/2026

As a Quality Assurance Nurse, you will work with local programs within the service area to develop, coordinate, implement, and monitor quality assurance initiatives, training programs and ensure the delivery of high quality support to the people we serve. Our Quality Assurance Nurse plays an integral part of ensuring operations meet regulatory and contractual compliance and maintain integrity of documentation to support service delivery.Reports to Director of Nursing;Conducts quality assurance reviews then assistance in implementing corrective action;Provides technical assistance to operations as part of the quality improvement and in response to reviews conducted by external entities such as accreditation bodies, clients, and other community partners;Identify areas of improvement quickly