Huntsville, AL 35812 • (42.2 miles) • Full Time • 9/10/2026

Qualis LLC is seeking a Systems Engineering, Requirements management, Verification, and Validation (RV&V) coordination, and system level integration support to the MSFC Systems Design and Verification Branch (EV72) to support the Space Nuclear Propulsion (SNP) Office, and to the MSFC Systems Engineering and Integration Division (EV70).The successful candidate will coordinate and interface with multiple engineering disciplines, system elements, cross-program elements, and customers, as well as participate in reviews, meetings, working groups, task teams, and trade studies. The candidate will supply leadership and/or support for the development of key systems engineering products including requirements specifications, support program/project milestones and subsequent activities where these p

Huntsville, AL 35898 • (42.1 miles) • Full Time • 9/10/2026

GENERAL DESCRIPTION:The Electronics Engineer Technician is responsible for the design, development and testing of electrical and electronic equipment, components, and systems.DUTIES:Must be a technical expert in Test Program Sets (TPS), built-in-test equipment (BIT/BITE) being able to perform analyses, development, evaluation, updates, prototyping, fielding, and specialized maintenance support in all phases of system life cycle.Must be able to work independently while providing remote and on-site troubleshooting and system repair highly technical and specialized maintenance on the Army's legacy Base Shop Test Facility and associated TPS, various Automated Test Equipment, Line Replaceable Units, and Shop Replaceable Units with limited supervision.Must be able to provide operator training fo

Huntsville, AL 35898 • (42.1 miles) • Full Time • 9/9/2026

Position Overview Sigmatech is seeking a Metrology Engineering Technician to support calibration, test, troubleshooting, repair, and sustainment activities for electronic and electromechanical systems in a Department of Defense environment. The selected candidate will perform component-level diagnostics and repairs, operate a variety of test equipment, and support engineering efforts to ensure mission readiness and compliance with Army and DOD technical standards.Essential Duties and Responsibilities Perform component-level troubleshooting, repair, calibration, and maintenance of electronic and electromechanical systems.Utilize test equipment including oscilloscopes, signal generators, spectrum analyzers, multimeters, function generators, and similar devices.Diagnose and resolve electronic

Madison, AL • (42.4 miles) • Full Time • 9/9/2026

Job Summary:The Assembly Engineer (Intermediate Level) is a hands-on position responsible for supporting projects from initiation through completion, including fabrication, assembly, programming, testing, customer inspections, and on-site installations. This role performs CNC milling and drilling operations and utilizes a variety of manual fabrication equipment, including lathes, welding equipment, band saws, drill presses, manual milling machines, and cutting tools to fabricate and modify components.The Assembly Engineer programs CNC machines, sets up tooling and fixtures, and builds mechanical assemblies from 2D blueprints and 3D CAD models. In addition to mechanical assembly, this role installs and routes electrical wiring, control cables, and instrumentation in accordance with electric

Decatur, AL 35603 • (26.1 miles) • Full Time • 9/9/2026

JOB SUMMARYThe Maintenance Engineer is responsible for assisting with the operation, maintenance, service and repair of equipment as assigned. He/she is also responsible for participating in the preventative maintenance program, handling guest requests and other work orders as assigned. He/she is also responsible for performing the job in a safe and efficient manner and performing trade jobs, such as carpentry, painting, plumbing, etc. May require driving shuttle van when needed (property specific)QUALIFICATION STANDARDSPhysical requirements:Long hours sometimes required.Heavy work - Exerting up to 100 pounds of force occasionally, and/or 50 pounds of force frequently and/or up to 20 pounds of force constantly to lift, carry, push, pull, or otherwise move objects.Ability to stand during en

Decatur, AL • (27.8 miles) • Full Time • 9/9/2026

Experience (required and preferred):· At least 3-10yrs experience working in an engineering role in a plant· Project management experience in an industrial environment· Maintenance troubleshooting experience in an industrial environment· Solid grasp of engineering fundamentals relating to mechanical design & systems· Demonstrated experience with trouble shooting industrial equipment, pneumatic systems, hydraulic systems, HVAC systems· Experience working on load cells systems, PLC’s, NG fired burner systems· Preventative & predictive maintenance principles and systems· Tire Cord and/or Carpet Manufacturing processes (Not required)· Experience with industrial Safety systems (OSHA 1910)Essential Functions· Support and drive plantwide predictive maintenance programs· Support and manage capital

Huntsville, AL 35808 • (42 miles) • Full Time • 9/8/2026

OCIO's Cybersecurity Risk Management Unit) with Cloud certification, preferred) Responsible for leading the implementation of the SAA Program, as defined in section 2.0 and in the SAA PG. Work Description: - Lead, mentor, and supervise a team of contractor security professionals responsible for the end-to-end implementation of the RMF lifecycle for FBI IT systems. - Oversee and coordinate activities within the Prepare step, ensuring roles, responsibilities, and risk management strategies are clearly defined and maintained. - Guide system categorization efforts to ensure all information systems are appropriately classified based on mission/business impact and regulatory requirements. - Advise on the selection, tailoring, and documentation of security controls aligned with system categorizat

Huntsville, AL 35812 • (42.2 miles) • Full Time • 9/7/2026

We are looking for an experienced Construction Project Engineer to assist in building a wide range of construction projects from start to finish. You will organize and oversee construction procedures and ensure they are completed in a timely and efficient manner. An excellent Construction Project Engineer must be well-versed in all construction methodologies and procedures and able to coordinate a team of professionals of different disciplines to achieve the best results. The ideal candidate will have an analytical mind, great organizational skills, and strong experience in managing federal construction projects. The goal will be to ensure all projects are delivered on time according to requirements and without exceeding budget.Responsibilities • Document control (RFIs, submittals, change

Decatur, AL 35601 • (29.6 miles) • Full Time • 9/6/2026

COMPANY OVERVIEWFounded in 2007 in Huntsville, AL, MartinFed provides the U.S. government with customer-focused, performance-based solutions using technology and an empowered workforce as an engine to drive its customers' missions. Our goal is to attract the best and brightest within their field.We invest in our people because they are our greatest asset. They cultivate our purpose, embody and reflect our core values, and define our culture. MartinFed's core values that set us apart are the following:Be Driven - We are fueled by the hunger to learn more and do more.Be Curious - We engage in continuous improvement - never accepting the status quo.Be Humble - We seek honest feedback to strengthen our relationships.Pursue Excellence - We strive to achieve extraordinary results and do not sett

Decatur, AL 35601 • (29.6 miles) • Full Time • 9/5/2026

Since 1987, Eagle Fire has been a trusted leader in fire protection and life safety services throughout the Southeast. We provide comprehensive fire sprinkler, fire alarm, suppression, and life safety solutions while creating meaningful career opportunities for our team members.We are seeking an experienced and motivated Field Supervisor to lead field operations, support our technicians, and ensure the safe, efficient delivery of exceptional service to our customers.BenefitsCompetitive compensationHealth, dental, and vision insuranceCompany-paid life insurance401(k) plan with company match10 paid holidaysPaid Time OffEmployee Assistance ProgramAnnual boot reimbursementNICET testing reimbursementTuition reimbursementApprenticeship and professional-development opportunitiesCompany-provided u

Huntsville, AL 35808 • (42 miles) • Full Time • 9/4/2026

Position Title: Data Engineer (Senior)Location: Redstone ArsenalPosition Type: Full-TimePosition OverviewWe are seeking a Senior Data Engineer to support complex data initiatives, including ETL development, large-scale data migrations, and high-performance data processing in a mission-driven environment. This role will work closely with engineering and analytics teams to design, build, and optimize data pipelines supporting critical systems.Key ResponsibilitiesDesign, develop, and maintain scalable ETL pipelines and data workflowsLead and support data migration efforts across enterprise systemsDevelop and optimize data processing solutions using Apache SparkWork with relational databases including Oracle and PostgreSQLWrite and maintain backend services and data integrations using JavaEnsu

Huntsville, AL 35898 • (42.1 miles) • Full Time • 9/4/2026

Cepeda Systems and Software Analysis, a rapidly growing small company in Huntsville, AL, is currently seeking a motivated and ambitiousUnmanned Aircraft Systems (UAS) Software Engineerto join the Software, Simulation, Systems Engineering and Integration Directorate (S3I) Joint Technology Center – Systems Integration Lab (JSIL) Tech Center. The UAS Software Engineer will collaborate with other developers, testers, and cyber personnel to address bugs and add new features to the codebase.JOB DUTIES AND RESPONSIBILITIES:Cross-Functional Collaboration: Collaborate with managers, hardware engineers, network engineers, and other stakeholders to implement system requirements and ensure seamless integration between software, hardware, and network components.Innovation & Technology Evaluation: Stay

Huntsville, AL 35898 • (42.1 miles) • Full Time • 9/4/2026

About Iron Will VenturesIron Will Ventures Inc. builds practical, high-reliability solutions for mission-critical environments. We combine rigorous engineering with fast, collaborative execution to deliver results our customers can trust.What We’re Hiring ForIron Will Ventures is seeking aSenior Telemetry & Trajectory Engineer to support the Targets Program Office in support of the agencies flight test events to validate the weapon and system sensors.Key ResponsibilitiesSupport the Missile Defense Agency (MDA) Directorate for Test (DT) Targets program office with development of missile defense target vehiclesSupport the Targets System Engineering team in all aspects of target design, analysis, and test to include requirements development and assessment, modeling and simulation, test analys

Huntsville, AL 35803 • (45 miles) • Full Time • 9/4/2026

Wanted - Big Brains & Huge Hearts: We are looking for creative and passionate geeks, nerds, thinkers, tinkerers, and builders.Geeks and Nerds is an innovative technology company that encourages ingenuity, defies the norm, fosters teamwork, and defines the future for our community and nation.Come join the company that develops innovative solutions that makes a positive difference in our community and nation. Join a company of significance!The Electronic Warfare (EW) Engineer will play a critical role in designing, developing, testing, and deploying advanced electronic warfare systems and technologies. This position requires expertise in RF (radio frequency) systems, signal processing, and electromagnetic spectrum management to support defense and security operations. The EW Engineer will co

Hartselle, AL 35640 • (21.3 miles) • Full Time • 9/4/2026

We are seeking a highly organized and detail-oriented Project Engineer to support construction projects by coordinating submittals, reviewing technical documentation, managing project records, and ensuring contract compliance. This role is ideal for a construction professional who enjoys working closely with project managers, architects, suppliers, and customers to help deliver successful projects from start to finish.Position SummaryThe Project Engineer is responsible for preparing and coordinating project submittals, reviewing drawings and specifications, managing RFIs, developing project schedules, and supporting procurement and closeout activities. This position plays a critical role in ensuring projects remain compliant, accurate, and on schedules.Key ResponsibilitiesPrepare, review,

Madison, AL 35756 • (36.6 miles) • Full Time • 9/4/2026

Paint Process Engineer DaikyoNishikawa USA, Inc.is a Tier 1 supplier for Mazda Toyota Manufacturing, located on Mazda Toyota’s campus in Madison, Alabama. We are looking for aPaint Process Engineerto join our team! This position requires an experienced professional with a comprehensive experience in paint processes who will be responsible for developing optimal Water-based Primer / Base Coat and 2K Clear Coat processes. Our ideal candidate exhibits a can-do attitude and approaches his or her work with vigor and determination. Candidates will be expected to demonstrate excellence in their respective fields, to possess the ability to learn quickly, and to strive for perfection within a fast-paced environment. REQUIREMENTS:Knowledge of Water-based Primer / Base Coat and 2K Clear Coat processe

Huntsville, AL 35808 • (42 miles) • Full Time • 9/4/2026

Apply NowRTL, C/C++, Python, VHDL, Verilog, Tcl, cryptography, hardware, embedded software, System Integration, Hardware Security, Xilinx, Simulation, IP core, Versal, Stratix, concept to deployment, Vivado, GHDL, Questa, Quartus Prime, Zynq, Agilex, AXI, ACE, Avalon, FPGA verification tools,reverse engineering, cocotb, pyuvmFull TimeTravel required to 10%.Must be able to apply for and maintain a U.S. Government Security ClearanceFPGA EngineerThe EndoSec FPGA Engineer is responsible for the design, development, testing, and maintenance of IP cores and FPGA-based systems used in hardware security applications.Key ResponsibilitiesFPGA Design and Development: Design and develop IP cores and FPGA configurations implementing the latest in leakage-resilient hardware cryptography algorithms using

Decatur, AL 35601 • (29.6 miles) • Full Time • 9/3/2026

Want to know more about the demands of this job? Click here:https://www.youtube.com/watch?v=T3n2Oi4-hP4Founded in 1964, TTL is an engineering design firm focused on delivering integrated infrastructure solutions for public and private clients. From site and corridor selection to due diligence, design, and construction services, TTL is a trusted partner providing single-sourced custom solutions for complex infrastructure development. With more than 500 team members across the Southern United States, TTL provides a wide range of services including civil and geotechnical engineering; transportation design and CEI; environmental consulting and remediation; construction materials engineering and testing; and surveying, GIS and mapping services.At TTL, we are driven to serve our clients, driven

Huntsville, AL 35824 • (39 miles) • Full Time • 9/2/2026

Job Title: Manufacturing Engineer III Location: Huntsville, AL Compensation: $72 per hour Type: Contract (6-month assignment) As a Manufacturing Engineer, you will translate engineering intent, drawings, and configurations into operational steps and processes to produce fully functional hardware at scale. Responsibilities include supporting builds, translating engineering definitions into manufacturing work instructions, and developing/qualifying new technology. Successful candidates will lead DFMA studies to strengthen the feedback loop between design, build, and test, accelerating product development.Responsibilities • Define how to prepare hardware for test, qualification, and flight. • Translate engineering intent, drawings, and configurations into fully functional hardware. • Identify

Huntsville, AL 35898 • (42.1 miles) • Full Time • 9/2/2026

Position Summary:Vali Incorporated seeks a highly qualified candidate to support our Missile Defense Agency (MDA) contract as an entry level engineer or mathematician in cost estimating and analysis. This position will perform cost estimating analysis support in the development, fielding, and integration of the MDA Missile Defense System. Cost Estimating support includes development and maintenance of Life Cycle Cost Estimates and models for Defense Acquisition programs, analysis and reporting of cost data, and conducting excursions.Essential Responsibilities:Develop, present, and defend mathematical cost estimates, cost estimating relationships, and cost models.Develop cost estimating relationships using applied mathematics, probability, statistics, regression analysis, linear algebra, le

Falkville, AL 35622 • (18.9 miles) • Full Time • 9/1/2026

A Laser Table Operator performs laser cutting for a variety of manufacturing needs.Duties and Responsibilities:Complete production records using a computer format to maintain cost, efficiencies, inventory and integrity.Establish proper stop location, adjust laser beam focal point.Loads sheet/plate raw material onto table by lifting stock into position via jib crane and sheet lifterLoads sheet/plate raw material onto table by lifting stock into position via jib crane and sheet lifterMake proper set-ups for cutting operationsRemove cut parts from skeletonDeburrs and removes sharp edges as necessaryPerform prescribed maintenance as required.Perform all dimensional inspections.Detect and report defective materials or questionable conditions to the department supervisorEnsure proper cleanliness

Madison, AL 35758 • (43 miles) • Full Time • 8/29/2026

About the Role HEKA is hiring Software Engineers to join our fast-paced, highly collaborative engineering teams working on advanced aerospace, defense, and embedded systems. We are looking for innovative, team-oriented engineers who take initiative, value ownership, and thrive in an environment where impact matters more than titles. Core ResponsibilitiesDesign, develop, and maintain embedded and systems-level softwareWork closely with electrical, mechanical, and systems engineers in a tightly integrated development environmentContribute to avionics, control, and mission-critical software stacksSupport rapid development cycles, prototyping, testing, and iterationTake ownership of technical decisions and deliverablesDesired Skills & ExperienceRequired Software development Experience with C/C

Decatur, AL 35601 • (29.6 miles) • Full Time • 8/28/2026

Benefits:Flexible scheduleOpportunity for advancementProfit sharingThis Is Not Your Average Tech Job Are you a hands-on I.T. or Telecom professional looking for something beyond the desk? AMG Tech Support is seeking skilled, driven technicians to support our growing national client base. This role goes far beyond basic helpdesk tasks one day you might be installing an operating system, the next you're drilling through walls and running structured cabling across entire buildings, or terminating a 66-block. If you're the kind of person who thrives in the field and loves the variety that comes with every job site, this opportunity is for you. Job ResponsibilitiesPerform a wide range of technical tasks including but not limited to: OS installations, hardware diagnostics, and software setupStru

Decatur, AL 35699 • (29.4 miles) • Full Time • 8/27/2026

We're seeking an Electrical Design Engineer to join our client's R&D team.This is a hands-on hardware design role focused on developing next-generation connectivity technologies. You'll work with a talented team of electrical, hardware, software, and systems engineers to take new technologies from concept through development.The company is looking for an experienced electrical design engineer with strong embedded power electronics and PCB design experience. The right engineer will have the technical foundation and aptitude to learn the exact technology.What You'll DoDesign and develop embedded electrical hardware, including power electronics, PCBs, and circuit-level systems.Work closely with hardware, software, and systems engineering teamsPerform circuit simulation, modeling, testing, and

Huntsville, AL 35808 • (42 miles) • Full Time • 8/27/2026

22504-1 Technician Field Level 2, Huntsville, AL (Secret/Ability to Obtain)DESCRIPTIONTechnician responsibilities will be maintaining/troubleshooting wheeled and track vehicles, such as M270, M270A1, and HIMARS vehicles.Working on Military vehicles, MLRS, Bradley, M1A1, HUMVEE, HEMITT, etc. Bulldozers, front end loaders.Render technical guidance to resolve difficult and unusual maintenance problems. Provide an analysis of maintenance program and recommendations that may be beneficial.Installs, operates, maintains, repairs and modifies equipment. Performs a variety of maintenance and technical support on products such as equipment, integrated systems and subsystems, and software at customer and/or field locations. Analyzes and evaluates products and related performance. Troubleshoots and di

Huntsville, AL 35898 • (42.1 miles) • Full Time • 8/25/2026

Location: Redstone Arsenal, Huntsville AL Position: Electro-Mechanical Controls Engineer Overview ITC Defense is seeking an Electro-Mechanical Controls Engineer to support the Missile Defense Agency (MDA) Facilities, MILCON, and Environmental Management Directorate at Redstone Arsenal in Huntsville, AL. This position is part of a multidisciplinary engineering team supporting mission-critical DoD facilities and infrastructure programs, with an emphasis on electro-mechanical systems, facility controls, and supporting infrastructure. ResponsibilitiesSupport the Government Project Manager through the planning, programming, design, execution, and documentation of Military Construction (MILCON), Sustainment, Restoration, and Modernization (SRM), facility improvement, and site-activation projects

Madison, AL 35758 • (43 miles) • Full Time • 8/24/2026

Job Title: Field Service Engineer – Access Control Support Analyst Role Summary The Field Service Engineer provides critical technical support and system maintenance for the ASD Service Desk Commissioning Team. This individual is responsible for managing access control and video surveillance infrastructure, ensuring system integrity, and guiding clients through complex technical resolutions.Core Responsibilities System Maintenance & Support:Install, update, and maintain Access Control systems, CCTV cameras, and related hardware.Technical Troubleshooting:Capture client issues via phone or ticketing systems and guide them through effective resolution.Field Coordination:Direct onsite technicians to support various technical solutions and provide remote guidance for system installations.Progr

Haleyville, AL • (25.3 miles) • Full Time • 8/23/2026

We’re looking for a hands-on Product Design Engineer who thrives on turning ideas into real, production-ready products. In this role, you’ll take ownership of structural and mechanical designs from early concept through prototype, validation and release. You’ll work at the center of engineering, manufacturing and supply chain, solving practical design challenges, driving improvements and seeing your work move from screen to shop floor to field. This is an opportunity to make a visible impact on products that operate in demanding, real-world environments.What you’ll doOwn new product and component development from initial concept through production releaseCreate, analyze and iterate 3D models and 2D drawings using Siemens NXPerform structural and fatigue analysis using ANSYS or similar FEA

Huntsville, AL 35808 • (42 miles) • Full Time • 8/23/2026

Are you passionate about human space exploration, understanding the origins of the universe, and working with a passionate and diverse team to make a difference? If you are, we need you!We need your talent, teamwork, and energy to help us achieve great things that inspire people all over the globe. We need you to bring creative ideas and diverse backgrounds to help us envision, shape, and deliver systems that will enable the exploration of space while benefiting people here on Earth. We are excited about what we do, and we need you on our team as we take on exciting challenges for NASA's pursuits in deep space exploration.We have an exciting opportunity for a Thermal Systems Engineer to join our ESSCA contract team at NASA Marshall Space Flight Center in Huntsville, AL.If selected you will

Madison, AL 35756 • (36.6 miles) • Full Time • 9/17/2026

Job TitleAssembly TechnicianJob DescriptionThis Assembly Technician role supports both prototype development and production activities for cutting-edge unmanned aerial vehicle (UAV) electronic systems. You will work hands-on with circuit boards and system-level electronics to test, assemble, and troubleshoot advanced aerospace and defense technologies, contributing directly to products that support real-world defense missions.ResponsibilitiesTest, troubleshoot, and validate electronic assemblies and embedded systems used in unmanned aerial vehicles (UAVs).Build and assemble prototype electronics, including circuit boards, printed circuit board assemblies (PCBA), wire harnesses, cable harnesses, and system-level assemblies.Perform quality inspections and functional testing of electronic com

Decatur, AL 35601 • (29.6 miles) • Full Time • 9/3/2026

Job Description:General Description:Routinely monitors the process to ensure reliable operation with respect for safety and manufacturing cost. Engineer recommends and sponsors process changes with-in the normal operating range to minimize cost and downtime. Engineer will sponsor and champion changes using the MOC system to make changes outside of the normal operating range. Engineer will develop, design, and implement process changes to fully utilize and optimize the operating unit. Engineer will assist manufacturing efforts involved in production planning, unit strategy, and unit training.Roles and Responsibilities• Provides a technical resource for process operations• Supports daily unit optimization efforts working with the unit teams• Supports emergency/after-hour operations that requ

Madison, AL 35758 • (43 miles) • Full Time • 9/18/2026

Griffon Aerospace, a leader in the Unmanned Aerial System (UAS) industry, is seeking a talented Aerial Target Mechanical Engineer to support our aerial target and unmanned aircraft product lines. Our Madison, AL based small business is seeking innovative individuals who want to join an up tempo, maker culture that proudly provides products and services to support the American Warfighter!Griffon Aerospace is seeking a motivated and detail-oriented Aerial Target Mechanical Engineer to join our engineering team in Madison, Alabama. In this role, you'll support the design, analysis, testing, and sustainment of fielded unmanned aircraft systems (UAS) and their associated ground launch systems. You will collaborate with senior engineers to ensure aircraft and launcher hardware meet performance,

Huntsville, AL 35898 • (42.1 miles) • Full Time • 9/18/2026

OverviewFlight Test EngineerLOCATION:Redstone Arsenal, Huntsville, ALJOB STATUS:Full-timeCLEARANCE: SecretCERTIFICATION: Class III MedicalTRAVEL:Up to 20%SALARY: $68k to $77kAstrion has an exciting opportunity fora Flight Test Engineerlocated at theRedstone Arsenal inHuntsville, AL.REQUIRED QUALIFICATIONS / SKILLSBachelor's degree in engineering from an ABET accredited school (aerospace, mechanical, or industrial/systems desired) and 0-3 years of experience performing engineering duties in designing, constructing, and testing aircraft and/or aviation systems; and conducting basic and applied research to evaluate adaptability of materials and equipment to aircraft design and manufacture. Additional experience acceptable for Engineer-II. Advanced degree may be considered to decrease experien

Huntsville, AL 35898 • (42.1 miles) • Full Time • 9/16/2026

Pending Contract AwardPosition Responsibility Summary:Primary Function - MBSE Execution (PWS 1.16.1.3): Executes day-to-day MBSE modeling, system design, and tool integration across multiple program offices to ensure sufficient capacity for continuous modeling workloads.Cross-Functional Configuration Management (PWS 1.16.5):* Cross-trained in Configuration Management to manage MBSE model baselines and version control within the enterprise CM framework. Ensures model integrity across development, staging, and production environments by applying CM discipline (configuration identification, control, and status accounting) directly to MBSE artifacts. Provides qualified backup to the Configuration Management Specialist during periods of high change activity.

Decatur, AL 35601 • (29.6 miles) • Full Time • 9/15/2026

Karman Space & Defense is a leader in the rapid design, development, and production of critical, next-generation system solutions that align with the U.S. Department of War and its allies’ core mission priorities, and meet the accelerating demand for access to space. Building on nearly 50 years of success, we deliver Payload & Protection Systems, Aero/Hydrodynamic Interstage Systems, and Propulsion & Launch Systems to more than 80 prime contractors supporting over 130 space and defense programs.As a Senior Development Engineer, you provide technical leadership and drive all phases of advanced aerospace system developmentfrom concept and full-scale design through prototype fabrication and testing. You lead multidiscipline efforts, guide program execution, support proposal development, and w

Huntsville, AL 35824 • (39 miles) • Full Time • 9/15/2026

SENIOR ELECTRICAL ENGINEER EOS Defense Systems USA is a trusted partner providing the most accurate Remote Weapon Systems for kinetic kill CUAS and ground-to-ground missions on all platforms.Be part of a company at the forefront of defense innovation. At EOS Defense Systems USA, we believe our people are our strength. We provide a safe and collaborative workplace where you can take on new challenges, build your skills and grow your career while contributing to the advancement of defense technology. THIS IS AN ON-SITE POSITION We are currently seeking a Senior Electrical Engineer with the following qualifications:Basic Qualifications:BA/BS Degree in Engineering, computer technology or related discipline or equivalent experience with more progressively challenging work requirements10+ Years

Huntsville, AL 35808 • (42 miles) • Full Time • 9/15/2026

Clearances Required: Active Secret Clearance to startCitizenship: Must be a current US citizenLocation: Onsite - HuntsvilleJob DescriptionTCS is searching for a Systems Test Engineer to join our strong team of Engineers supporting our Ground-based Midcourse Defense (GMD) customer in Huntsville, AL. The GMD program is a portion of the Missile Defense Agency's (MDA) system to protect the US and our allies from ballistic missile attacks. The selected candidate will use modern tools to further the development and sustainment of the GMD system.”Basic Qualifications:Bachelor’s Degree from an accredited university and 8 years of related experience, or a Master's Degree and 6 years of related experience, or 4 years of related experience with a PhD.Experience with components of the Software Develop

Huntsville, AL 35898 • (42.1 miles) • Full Time • 9/15/2026

Platform Infrastructure EngineerRedstone Arsenal/Huntsville, ALAt IPT Associates (IPTA), we enjoy solving real-world problems with technology. We work closely with our customers, teammates, experts, and partners to come up with practical solutions that actually make a difference. Whether it's a government or business organization, we focus on understanding the need and building something that works.Our TeamAt IPTA, everything starts with our people. We're big believers that when you invest in your team, great things happen. That's why we encourage learning, growth, and trying new things-even if you don't have all the answers yet.Our culture is rooted in fierce determination, fearless integrity, and passionate service-but we also like to keep things collaborative, supportive, and down-to-ea

Huntsville, AL 35898 • (42.1 miles) • Full Time • 9/15/2026

Job Description:ISSAC LLC is seeking a mid-level Systems Engineer or Analyst to join the team responsible for the Missile Defense System (MDS) Ground Test (GT) scenario design for the Missile Defense Agency (MDA). MDA GTs are used to assess our nation's defense systems through a variety of HWIL and simulation tests. The Scenario Design team uses their understanding of how each of these systems work and interoperate in defense of adversaries to build the tests. Our work is a fast-paced blend of systems and test engineering, along with systems analysis. Our knowledge is constantly expanding. We are known for developing innovative solutions. The team works with a dedicated software team to improve our tools and processes. The qualified candidate will be able to analyze requirements and constr

Huntsville, AL 35898 • (42.1 miles) • Full Time • 9/11/2026

Position Title: DevOps Engineer MidLocation: Redstone ArsenalPosition Type: Full-TimePosition SummaryCintel is seeking a Mid-Level DevOps Engineer to support the design, deployment, testing, certification, operation, and maintenance of DevSecOps infrastructure and tools in a secure environment. The ideal candidate will have hands-on experience with Linux administration, Python development, Kubernetes, Ansible, Splunk, and automated deployment practices.ResponsibilitiesDesign, deploy, test, certify, operate, patch, and maintain DevSecOps infrastructure, including operating systems, support libraries, components, and application dependencies.Develop applications, scripts, and utility programs using Python to support cybersecurity, automation, and operational requirements.Use GitHub for sourc

Huntsville, AL 35808 • (42 miles) • Full Time • 9/10/2026

CODEplus, Inc. is an established information technology services company supporting federal government customers with IT operations, software development, service desk, cybersecurity, and technical support services. For more than 31 years, CODEplus has focused on delivering responsive, high-quality technology solutions to meet the mission needs of our government clients.CODEplus is seeking an experienced Combustion Devices Engineer to lead Service Desk operations supporting a federal government customer in Huntsville, AL. This position is on-site.Primary duties for the Combustion Devices Engineer would include: - Gather data and assemble for assessment of changes and issues with hardware and test data. - Collaborate with other engineers to resolve technical issues. - Document and deliver r